[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x51df805e] [ 0.000000] Linux version 4.19.157+ (scm@09b4acf58bc5) (clang version 10.0.7 for Android NDK, GNU ld (binutils-2.27-bd24d23f) 2.27.0.20170315) #1 SMP PREEMPT Fri Aug 26 19:38:25 CST 2022 [ 0.000000] Machine model: Qualcomm Technologies, Inc. kona MTP-RmPM8150b [ 0.000000] earlycon: msm_geni_serial0 at MMIO 0x0000000000a90000 (options '') [ 0.000000] bootconsole [msm_geni_serial0] enabled [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] Memory limit set/overridden to 6072MB [ 0.000000] OF: reserved mem: OVERLAP DETECTED!\x0adisp_rdump_region@9c000000 (0x000000009c000000--0x000000009c800000) overlaps with cont_splash_region@9c000000 (0x000000009c000000--0x000000009e300000) [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000fec00000, size 16 MiB [ 0.000000] OF: reserved mem: initialized node user_contig_region, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000fcc00000, size 32 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000fbc00000, size 16 MiB [ 0.000000] OF: reserved mem: initialized node qseecom_ta_region, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f1800000, size 164 MiB [ 0.000000] OF: reserved mem: initialized node secure_display_region, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f0400000, size 20 MiB [ 0.000000] OF: reserved mem: initialized node cnss_wlan_region, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000edc00000, size 40 MiB [ 0.000000] OF: reserved mem: initialized node mem_dump_region, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000ecc00000, size 16 MiB [ 0.000000] OF: reserved mem: initialized node sp_region, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000ec800000, size 4 MiB [ 0.000000] OF: reserved mem: initialized node cdsp_region, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000eb400000, size 20 MiB [ 0.000000] OF: reserved mem: initialized node qseecom_region, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000eac00000, size 8 MiB [ 0.000000] OF: reserved mem: initialized node sdsp_region, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000ea000000, size 12 MiB [ 0.000000] OF: reserved mem: initialized node adsp_region, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000ffc00000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node mailbox_region, compatible id shared-dma-pool [ 0.000000] Removed memory: created DMA memory pool at 0x0000000080880000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node res_xbl_uefi_log_region@80880000, compatible id removed-dma-pool [ 0.000000] Removed memory: created DMA memory pool at 0x0000000086200000, size 5 MiB [ 0.000000] OF: reserved mem: initialized node pil_camera_region@86200000, compatible id removed-dma-pool [ 0.000000] Removed memory: created DMA memory pool at 0x0000000086700000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node pil_wlan_fw_region@86700000, compatible id removed-dma-pool [ 0.000000] Removed memory: created DMA memory pool at 0x0000000086800000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node pil_ipa_fw_region@86800000, compatible id removed-dma-pool [ 0.000000] Removed memory: created DMA memory pool at 0x0000000086810000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node pil_ipa_gsi_region@86810000, compatible id removed-dma-pool [ 0.000000] Removed memory: created DMA memory pool at 0x000000008681a000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node pil_gpu_region@8681a000, compatible id removed-dma-pool [ 0.000000] Removed memory: created DMA memory pool at 0x0000000086900000, size 5 MiB [ 0.000000] OF: reserved mem: initialized node pil_npu_region@86900000, compatible id removed-dma-pool [ 0.000000] Removed memory: created DMA memory pool at 0x0000000086e00000, size 5 MiB [ 0.000000] OF: reserved mem: initialized node pil_video_region@86e00000, compatible id removed-dma-pool [ 0.000000] Removed memory: created DMA memory pool at 0x0000000087300000, size 5 MiB [ 0.000000] OF: reserved mem: initialized node pil_cvp_region@87300000, compatible id removed-dma-pool [ 0.000000] Removed memory: created DMA memory pool at 0x0000000087800000, size 20 MiB [ 0.000000] OF: reserved mem: initialized node pil_cdsp_region@87800000, compatible id removed-dma-pool [ 0.000000] Removed memory: created DMA memory pool at 0x0000000088c00000, size 21 MiB [ 0.000000] OF: reserved mem: initialized node pil_slpi_region@88c00000, compatible id removed-dma-pool [ 0.000000] Removed memory: created DMA memory pool at 0x000000008a100000, size 29 MiB [ 0.000000] OF: reserved mem: initialized node pil_adsp_region@8a100000, compatible id removed-dma-pool [ 0.000000] Removed memory: created DMA memory pool at 0x000000008be00000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node pil_spss_region@8be00000, compatible id removed-dma-pool [ 0.000000] Removed memory: created DMA memory pool at 0x000000008bf00000, size 70 MiB [ 0.000000] OF: reserved mem: initialized node cdsp_secure_heap@8bf00000, compatible id removed-dma-pool [ 0.000000] cma: dma_contiguous_reserve(limit 1000000000000) [ 0.000000] On node 0 totalpages: 1489200 [ 0.000000] Normal zone: 24552 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 1489200 pages, LIFO batch:63 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] random: fast init done [ 0.000000] percpu: Embedded 474 pages/cpu s1904096 r8192 d29216 u1941504 [ 0.000000] pcpu-alloc: s1904096 r8192 d29216 u1941504 alloc=474*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: kernel page table isolation disabled by kernel configuration [ 0.000000] CPU features: detected: Speculative Store Bypassing Safe (SSBS) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1464648 [ 0.000000] Kernel command line: cgroup_disable=pressure rcupdate.rcu_expedited=1 rcu_nocbs=0-7 kpti=off console=ttyMSM0,115200n8 earlycon=msm_geni_serial,0xa90000 androidboot.hardware=qcom androidboot.console=ttyMSM0 androidboot.memcg=1 lpm_levels.sleep_disabled=1 video=vfb:640x400,bpp=32,memsize=3072000 msm_rtb.filter=0x237 service_locator.enable=1 androidboot.usbcontroller=a600000.dwc3 swiotlb=2048 loop.max_part=7 cgroup.memory=nokmem,nosocket reboot=panic_warm buildvariant=userdebug androidboot.verifiedbootstate=orange androidboot.keymaster=1 androidboot.vbmeta.device=PARTUUID=5f7f345e-8b71-8909-c776-4e93cd403f14 androidboot.vbmeta.avb_version=1.0 androidboot.vbmeta.device_state=unlocked androidboot.vbmeta.hash_alg=sha256 androidboot.vbmeta.size=8000 androidboot.vbmeta.digest=a01a6d221624eb27ab068ba8e0b5324d4db341a1e3ee748884f6e0926297d80f androidboot.vbmeta.invalidate_on_error=yes androidboot.veritymode=enforcing androidboot.bootdevice=1d84000.ufshc androidboot.fstab_suffix=default [ 0.000000] cgroup: Disabling pressure control group feature [ 0.000000] log_buf_len individual max cpu contribution: 131072 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 917504 bytes [ 0.000000] log_buf_len min size: 131072 bytes [ 0.000000] log_buf_len: 1048576 bytes [ 0.000000] early log buf free: 122736(93%) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 5338712K/5956800K available (25020K kernel code, 3560K rwdata, 11320K rodata, 9344K init, 29883K bss, 261736K reserved, 356352K cma-reserved) [ 0.000000] random: random: get_random_u64 called from __kmem_cache_create+0x8c/0x6b0 with crng_init=1 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] ftrace: allocating 56295 entries in 220 pages [ 0.000000] Running RCU self tests [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: \x09RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] rcu: \x09RCU lockdep checking is enabled. [ 0.000000] \x09All grace periods are expedited (rcu_expedited). [ 0.000000] \x09Tasks RCU enabled. [ 0.000000] kmemleak: Kernel memory leak detector disabled [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: Distributor has no Range Selector support [ 0.000000] GICv3: no VLPI support, no direct LPI support [ 0.000000] ITS: No ITS available, not enabling LPIs [ 0.000000] rcu: \x09Offload RCU callbacks from CPUs: 0-7. [ 0.000000] Successfully registered dummy reset controller for cpucc_clocks [ 0.000000] Successfully registered dummy clock controller for cpucc_clocks [ 0.000000] arch_timer: CPU0: Trapping CNTVCT access [ 0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000004] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.008266] clocksource: Switched to clocksource arch_sys_counter [ 0.017176] Console: colour dummy device 80x25 [ 0.021841] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.030065] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.034342] ... MAX_LOCK_DEPTH: 48 [ 0.038706] ... MAX_LOCKDEP_KEYS: 8191 [ 0.043248] ... CLASSHASH_SIZE: 4096 [ 0.047789] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.052459] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.057091] ... CHAINHASH_SIZE: 32768 [ 0.061722] memory used by lock dependency info: 7903 kB [ 0.067330] per task-struct memory footprint: 3072 bytes [ 0.073009] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800) [ 0.083613] pid_max: default: 32768 minimum: 301 [ 0.089277] Security Framework initialized [ 0.093589] SELinux: Initializing. [ 0.097823] AppArmor: AppArmor disabled by boot time parameter [ 0.104386] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.111701] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.133889] ASID allocator initialised with 65536 entries [ 0.140548] rcu: Hierarchical SRCU implementation. [ 0.181721] shmbridge is enabled [ 0.186070] EFI services will not be available. [ 0.196186] smp: Bringing up secondary CPUs ... [ 0.209662] Detected VIPT I-cache on CPU1 [ 0.209771] arch_timer: CPU1: Trapping CNTVCT access [ 0.209785] CPU1: Booted secondary processor 0x0000000100 [0x51df805e] [ 0.219383] Detected VIPT I-cache on CPU2 [ 0.219459] arch_timer: CPU2: Trapping CNTVCT access [ 0.219472] CPU2: Booted secondary processor 0x0000000200 [0x51df805e] [ 0.228059] Detected VIPT I-cache on CPU3 [ 0.228121] arch_timer: CPU3: Trapping CNTVCT access [ 0.228133] CPU3: Booted secondary processor 0x0000000300 [0x51df805e] [ 0.237083] CPU features: enabling workaround for Mismatched cache type [ 0.237106] CPU features: enabling workaround for ARM erratum 1542418 [ 0.237123] CPU features: detected: Hardware dirty bit management [ 0.237140] Detected PIPT I-cache on CPU4 [ 0.237175] CPU features: Unsupported CPU feature variation detected. [ 0.237260] arch_timer: CPU4: Trapping CNTVCT access [ 0.237286] CPU4: Booted secondary processor 0x0000000400 [0x411fd0d0] [ 0.246849] Detected PIPT I-cache on CPU5 [ 0.246963] arch_timer: CPU5: Trapping CNTVCT access [ 0.246990] CPU5: Booted secondary processor 0x0000000500 [0x411fd0d0] [ 0.256598] Detected PIPT I-cache on CPU6 [ 0.256708] arch_timer: CPU6: Trapping CNTVCT access [ 0.256735] CPU6: Booted secondary processor 0x0000000600 [0x411fd0d0] [ 0.266123] Detected PIPT I-cache on CPU7 [ 0.266178] arch_timer: CPU7: Trapping CNTVCT access [ 0.266190] CPU7: Booted secondary processor 0x0000000700 [0x411fd0d0] [ 0.267078] smp: Brought up 1 node, 8 CPUs [ 0.411244] SMP: Total of 8 processors activated. [ 0.416417] CPU features: detected: GIC system register CPU interface [ 0.423121] CPU features: detected: Privileged Access Never [ 0.428984] CPU features: detected: LSE atomic instructions [ 0.434791] CPU features: detected: User Access Override [ 0.440326] CPU features: detected: 32-bit EL0 Support [ 0.445692] CPU features: detected: RAS Extension Support [ 0.453108] CPU: All CPU(s) started at EL1 [ 0.457632] alternatives: patching kernel code [ 0.665613] allocated 62914560 bytes of page_ext [ 0.684721] Node 0, zone Normal: page owner found early allocated 15601 pages [ 3.683840] Registered cp15_barrier emulation handler [ 3.689224] Registered setend emulation handler [ 3.700872] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 3.711252] futex hash table entries: 2048 (order: 6, 262144 bytes) [ 4.054017] pinctrl core: initialized pinctrl subsystem [ 4.063452] [ 4.065071] ************************************************************* [ 4.072163] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 4.079193] ** ** [ 4.086216] ** IOMMU DebugFS SUPPORT HAS BEEN ENABLED IN THIS KERNEL ** [ 4.093281] ** ** [ 4.100307] ** This means that this kernel is built to expose internal ** [ 4.107344] ** IOMMU data structures, which may compromise security on ** [ 4.114408] ** your system. ** [ 4.121432] ** ** [ 4.128494] ** If you see this message and you are not debugging the ** [ 4.135518] ** kernel, report this immediately to your vendor! ** [ 4.142541] ** ** [ 4.149603] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 4.156626] ************************************************************* [ 4.164523] DMI not present or invalid. [ 4.171377] NET: Registered protocol family 16 [ 4.182628] schedtune: configured to support 6 boost groups [ 4.189940] audit: initializing netlink subsys (disabled) [ 4.197219] audit: type=2000 audit(4.187:1): state=initialized audit_enabled=0 res=1 [ 4.205472] cpuidle: using governor menu [ 4.209764] cpuidle: using governor qcom [ 4.214896] NET: Registered protocol family 42 [ 4.220470] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 4.241531] DMA: preallocated 256 KiB pool for atomic allocations [ 4.252927] DMA: preallocated 256 KiB pool for atomic allocations [ 4.264805] exit: IPA_USB init success! [ 4.316033] platform 82400000.qseecom: assigned reserved memory node qseecom_region [ 4.377575] platform soc:qcom,ipa_fws: assigned reserved memory node pil_ipa_gsi_region@86810000 [ 4.387414] platform soc:qcom,ipa_uc: assigned reserved memory node pil_ipa_fw_region@86800000 [ 4.403771] platform 17300000.qcom,lpass: assigned reserved memory node pil_adsp_region@8a100000 [ 4.414317] platform 8300000.qcom,turing: assigned reserved memory node pil_cdsp_region@87800000 [ 4.424310] platform aab0000.qcom,venus: assigned reserved memory node pil_video_region@86e00000 [ 4.435051] platform 188101c.qcom,spss: assigned reserved memory node pil_spss_region@8be00000 [ 4.444849] platform abb0000.qcom,cvpss: assigned reserved memory node pil_cvp_region@87300000 [ 4.454637] platform 9800000.qcom,npu: assigned reserved memory node pil_npu_region@86900000 [ 4.465680] platform soc:qcom,msm-adsprpc-mem: assigned reserved memory node adsp_region [ 4.478670] platform soc:mem_dump: assigned reserved memory node mem_dump_region [ 4.488496] platform 5c00000.qcom,ssc: assigned reserved memory node pil_slpi_region@88c00000 [ 4.524575] platform 88a7000.msm_tspp: assigned reserved memory node qseecom_region [ 4.903400] msm_watchdog 17c10000.qcom,wdt: wdog absent resource not present [ 4.912222] msm_watchdog 17c10000.qcom,wdt: MSM Watchdog Initialized [ 4.925883] Unable to find DT property: qcom,msm-imem-download_mode [ 4.933306] Unable to find DT property: qcom,msm-imem-emergency_download_mode [ 4.964789] msm-dcc 1023000.dcc_v2: DCC list passed 3 [ 4.970344] msm-dcc 1023000.dcc_v2: All values written to enable. [ 4.977012] msm-dcc 1023000.dcc_v2: DCC list passed 6 [ 4.982554] msm-dcc 1023000.dcc_v2: All values written to enable. [ 4.989318] msm-dcc 1023000.dcc_v2: DCC list passed 7 [ 4.994865] msm-dcc 1023000.dcc_v2: All values written to enable. [ 5.001587] msm-dcc 1023000.dcc_v2: Failed to add DCC data in Minidump [ 5.015192] sps:sps is ready. [ 5.020166] spmi spmi-0: PMIC arbiter version v5 (0x50010000) [ 5.033314] pm8150a_s3_mmcx_sup_level: regulator get failed, ret=-517 [ 5.042818] pm8150_s3_level: supplied by pm8150a_s3_level [ 5.051228] pm8150_s3_level_ao: supplied by pm8150a_s3_level_ao [ 5.065219] pm8150a_s3_mmcx_sup_level: supplied by pm8150_s3_mmcx_sup_level [ 5.066945] AMOLED: qpnp_amoled_parse_dt: Unknown peripheral type 0x0 [ 5.079146] qcom,qpnp-amoled-regulator c440000.qcom,spmi:qcom,pm8150l@5:qcom,amoled: Failed to parse DT params rc=-22 [ 5.090151] qcom,qpnp-amoled-regulator: probe of c440000.qcom,spmi:qcom,pm8150l@5:qcom,amoled failed with error -22 [ 5.110175] spmi spmi-0: pmic_arb_wait_for_done: transaction failed (0x3) [ 5.154535] pm8150a_s4_level: supplied by pm8150a_s3_mmcx_sup_level [ 5.164580] pm8150a_s4_level_ao: supplied by pm8150a_s3_level_ao [ 5.342498] MSM Memory Dump base table set up [ 5.347075] MSM Memory Dump apps data table set up [ 5.516135] cryptd: max_cpu_qlen set to 1000 [ 5.528960] vServices Framework 1.0 [ 5.573455] gdsc ad07004.qcom,gdsc: Linked as a consumer to regulator.31 [ 5.580935] gdsc ad07004.qcom,gdsc: Dropping the link to regulator.31 [ 5.590406] gdsc ad0a004.qcom,gdsc: Linked as a consumer to regulator.31 [ 5.597884] gdsc ad0a004.qcom,gdsc: Dropping the link to regulator.31 [ 5.606807] gdsc ad0b004.qcom,gdsc: Linked as a consumer to regulator.31 [ 5.614136] gdsc ad0b004.qcom,gdsc: Dropping the link to regulator.31 [ 5.623000] gdsc ad08004.qcom,gdsc: Linked as a consumer to regulator.31 [ 5.630319] gdsc ad08004.qcom,gdsc: Dropping the link to regulator.31 [ 5.639154] gdsc ad09004.qcom,gdsc: Linked as a consumer to regulator.31 [ 5.646467] gdsc ad09004.qcom,gdsc: Dropping the link to regulator.31 [ 5.655275] gdsc ad0c144.qcom,gdsc: Linked as a consumer to regulator.31 [ 5.662587] gdsc ad0c144.qcom,gdsc: Dropping the link to regulator.31 [ 5.671425] gdsc af03000.qcom,gdsc: Linked as a consumer to regulator.31 [ 5.678734] gdsc af03000.qcom,gdsc: Dropping the link to regulator.31 [ 5.688449] gdsc 3d9106c.qcom,gdsc: Linked as a consumer to regulator.4 [ 5.696822] gpu_cx_gdsc: supplied by pm8150_s3_level [ 5.706776] gdsc 3d9100c.qcom,gdsc: Linked as a consumer to regulator.30 [ 5.715218] gpu_gx_gdsc: supplied by pm8150a_s1_level [ 5.725571] gdsc abf0d18.qcom,gdsc: Linked as a consumer to regulator.31 [ 5.732846] gdsc abf0d18.qcom,gdsc: Dropping the link to regulator.31 [ 5.741876] gdsc abf0bf8.qcom,gdsc: Linked as a consumer to regulator.31 [ 5.749188] gdsc abf0bf8.qcom,gdsc: Dropping the link to regulator.31 [ 5.758158] gdsc abf0d98.qcom,gdsc: Linked as a consumer to regulator.31 [ 5.765464] gdsc abf0d98.qcom,gdsc: Dropping the link to regulator.31 [ 5.774742] gdsc abf0c98.qcom,gdsc: Linked as a consumer to regulator.31 [ 5.782103] gdsc abf0c98.qcom,gdsc: Dropping the link to regulator.31 [ 5.798410] qmp-aop-clk soc:qcom,aopclk: Registered clocks with AOP [ 5.814548] gcc-kona 100000.qcom,gcc: Linked as a consumer to regulator.31 [ 5.822202] gcc-kona 100000.qcom,gcc: Linked as a consumer to regulator.4 [ 5.829735] gcc-kona 100000.qcom,gcc: Linked as a consumer to regulator.5 [ 5.890550] gcc-kona 100000.qcom,gcc: Registered GCC clocks [ 5.899899] gpu_cc-kona 3d90000.qcom,gpucc: Linked as a consumer to regulator.4 [ 5.907966] gpu_cc-kona 3d90000.qcom,gpucc: Linked as a consumer to regulator.1 [ 5.923257] gpu_cc-kona 3d90000.qcom,gpucc: Registered GPU CC clocks [ 5.932749] npu_cc-kona 9980000.qcom,npucc: Linked as a consumer to regulator.4 [ 5.969102] npu_cc-kona 9980000.qcom,npucc: Registered NPU_CC clocks [ 5.979441] video_cc-kona abf0000.qcom,videocc: Linked as a consumer to regulator.1 [ 5.987799] video_cc-kona abf0000.qcom,videocc: Linked as a consumer to regulator.31 [ 5.995847] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready. [ 6.005445] video_cc-kona abf0000.qcom,videocc: Unable to register for bw voting [ 6.013463] video_cc-kona abf0000.qcom,videocc: Dropping the link to regulator.31 [ 6.021454] video_cc-kona abf0000.qcom,videocc: Dropping the link to regulator.1 [ 6.039701] Minidump: Enabled with max number of regions 200 [ 6.046579] socinfo_init: New IDs added! ID => CPU mapping needs an update. [ 6.054261] KPI: Bootloader start count = 55428 [ 6.058994] KPI: Bootloader end count = 244877 [ 6.063612] KPI: Bootloader display count = 3724541823 [ 6.068998] KPI: Bootloader load kernel count = 3370 [ 6.074159] KPI: Kernel MPM timestamp = 611171 [ 6.078773] KPI: Kernel MPM Clock frequency = 32768 [ 6.083888] socinfo_print: v0.15, id=481, ver=2.1, raw_id=342, raw_ver=0, hw_plat=8, hw_plat_ver=65536\x0a accessory_chip=0, hw_plat_subtype=0, pmic_model=65566, pmic_die_revision=196608 foundry_id=1 serial_number=4110730580 num_pmics=4 chip_family=0x5d raw_device_family=0x6 raw_device_number=0x8 nproduct_id=0x412 num_clusters=0x1 ncluster_array_offset=0xb0 num_defective_parts=0xc ndefective_parts_array_offset=0xb4 nmodem_supported=0x0 [ 6.124682] msm_bus_fabric_rpmh_init_driver [ 6.130210] msm_bus: Probe started [ 6.138269] msm_bus_device 16e0000.ad-hoc-bus: Bus type is missing [ 6.148414] msm_bus_device 16e0000.ad-hoc-bus: Bus type is missing [ 6.155461] msm_bus_device 16e0000.ad-hoc-bus: Bus type is missing [ 6.195190] msm_bus: DT Parsing complete [ 6.226647] msm_bus_fab_init_noc_ops: Invalid Bus type [ 6.231668] msm_bus_fab_init_noc_ops: Invalid Bus type [ 6.240741] msm_bus_fab_init_noc_ops: Invalid Bus type [ 7.290348] Built 1 zonelists, mobility grouping on. Total pages: 1418534 [ 9.633153] mem-offline: Added memory blocks ranging from mem16 - mem19 [ 9.653792] arm-smmu 3da0000.kgsl-smmu: Linked as a consumer to regulator.69 [ 9.661289] arm-smmu 3da0000.kgsl-smmu: \x09non-coherent table walk [ 9.667539] arm-smmu 3da0000.kgsl-smmu: \x09(IDR0.CTTW overridden by FW configuration) [ 9.675507] arm-smmu 3da0000.kgsl-smmu: \x09stream matching with 6 register groups [ 9.700025] register_client_adhoc:find path.src 161 dest 627 [ 9.703200] register_client_adhoc:Client handle 1 apps_smmu [ 9.709518] arm-smmu 15000000.apps-smmu: \x09non-coherent table walk [ 9.721611] arm-smmu 15000000.apps-smmu: \x09(IDR0.CTTW overridden by FW configuration) [ 9.729673] arm-smmu 15000000.apps-smmu: \x09stream matching with 87 register groups [ 9.742295] register_client_adhoc:find path.src 161 dest 627 [ 9.745017] register_client_adhoc:Client handle 2 apps_smmu [ 9.753411] register_client_adhoc:find path.src 161 dest 627 [ 9.761963] register_client_adhoc:Client handle 3 apps_smmu [ 9.771200] qsmmuv500-tbu 1518d000.mnoc_hf_0_tbu: Linked as a consumer to regulator.65 [ 9.785635] register_client_adhoc:find path.src 22 dest 773 [ 9.787081] register_client_adhoc:Client handle 4 mnoc_hf_0_tbu [ 9.795666] qsmmuv500-tbu 15191000.mnoc_hf_1_tbu: Linked as a consumer to regulator.66 [ 9.810432] register_client_adhoc:find path.src 22 dest 773 [ 9.811770] register_client_adhoc:Client handle 5 mnoc_hf_1_tbu [ 9.820029] register_client_adhoc:find path.src 154 dest 10070 [ 9.827171] register_client_adhoc:Client handle 6 apps_smmu [ 9.835789] register_client_adhoc:find path.src 154 dest 10070 [ 9.842521] register_client_adhoc:Client handle 7 apps_smmu [ 9.851031] register_client_adhoc:find path.src 161 dest 627 [ 9.859603] register_client_adhoc:Client handle 8 apps_smmu [ 9.868012] register_client_adhoc:find path.src 161 dest 627 [ 9.876502] register_client_adhoc:Client handle 9 apps_smmu [ 9.885529] qsmmuv500-tbu 151a5000.mnoc_sf_0_tbu: Linked as a consumer to regulator.67 [ 9.899906] register_client_adhoc:find path.src 137 dest 772 [ 9.901426] register_client_adhoc:Client handle 10 mnoc_sf_0_tbu [ 9.910089] qsmmuv500-tbu 151a9000.mnoc_sf_1_tbu: Linked as a consumer to regulator.68 [ 9.924851] register_client_adhoc:find path.src 137 dest 772 [ 9.926166] register_client_adhoc:Client handle 11 mnoc_sf_1_tbu [ 9.935027] Error: Driver 'arm-smmu' is already registered, aborting... [ 9.948828] vgaarb: loaded [ 9.955824] SCSI subsystem initialized [ 9.961376] usbcore: registered new interface driver usbfs [ 9.967417] usbcore: registered new interface driver hub [ 9.973716] usbcore: registered new device driver usb [ 9.981216] usb_phy_generic soc:usb_nop_phy: soc:usb_nop_phy supply vcc not found, using dummy regulator [ 9.991623] usb_phy_generic soc:usb_nop_phy: Linked as a consumer to regulator.0 [ 10.004612] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8150@0:qcom,power-on@800: PMIC@SID0 Power-on reason: Triggered from SMPL (Sudden Momentary Power Loss) and 'cold' boot [ 10.020720] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8150@0:qcom,power-on@800: PMIC@SID0: Power-off reason: Triggered from UVLO (Under Voltage Lock Out) [ 10.036550] input: qpnp_pon as /devices/platform/soc/c440000.qcom,spmi/spmi-0/spmi0-00/c440000.qcom,spmi:qcom,pm8150@0:qcom,power-on@800/input/input0 [ 10.052903] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8150l@4:qcom,power-on@800: PMIC@SID4 Power-on reason: Triggered from PON1 (Secondary PMIC) and 'cold' boot [ 10.067884] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8150l@4:qcom,power-on@800: PMIC@SID4: Power-off reason: Triggered from FAULT_FAULT_N [ 10.082401] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8009@a:qcom,power-on@800: Invalid PON_PERPH_SUBTYPE 0x07 [ 10.092997] qcom,qpnp-power-on: probe of c440000.qcom,spmi:qcom,pm8009@a:qcom,power-on@800 failed with error -22 [ 10.103760] spmi spmi-0: pmic_arb_wait_for_done: transaction failed (0x3) [ 10.110851] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pmxprairie@8:qcom,power-on@800: Register read failed, addr=0x0805, rc=-5 [ 10.122637] qcom,qpnp-power-on: probe of c440000.qcom,spmi:qcom,pmxprairie@8:qcom,power-on@800 failed with error -5 [ 10.134129] media: Linux media interface: v0.10 [ 10.139147] videodev: Linux video capture interface: v2.00 [ 10.145283] pps_core: LinuxPPS API ver. 1 registered [ 10.150488] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 10.160038] PTP clock support registered [ 10.270716] virt zone: sensor[gpuss-1-usr] read error:-22 [ 10.276355] thermal thermal_zone25: failed to read out thermal zone (-22) [ 10.305616] EDAC MC: Ver: 3.0.0 [ 10.463102] energy_model: pd0: hertz/watts ratio non-monotonically decreasing: em_cap_state 2 >= em_cap_state1 [ 10.469066] energy_model: Created perf domain 0-3 [ 10.470559] BUG: key ffffffc96a07ef38 not in .data! [ 10.484077] energy_model: Created perf domain 4-6 [ 10.485336] BUG: key ffffffc96eabb338 not in .data! [ 10.491415] energy_model: pd7: hertz/watts ratio non-monotonically decreasing: em_cap_state 13 >= em_cap_state12 [ 10.493585] energy_model: Created perf domain 7 [ 10.494280] BUG: key ffffffc969c90938 not in .data! [ 10.500744] cpufreq: driver qcom-cpufreq-hw up and running [ 10.510212] platform soc:qcom,ion:qcom,ion-heap@22: assigned reserved memory node sdsp_region [ 10.519492] platform soc:qcom,ion:qcom,ion-heap@26: assigned reserved memory node user_contig_region [ 10.529167] platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory node qseecom_region [ 10.538458] platform soc:qcom,ion:qcom,ion-heap@19: assigned reserved memory node qseecom_ta_region [ 10.548044] platform soc:qcom,ion:qcom,ion-heap@13: assigned reserved memory node sp_region [ 10.556892] platform soc:qcom,ion:qcom,ion-heap@10: assigned reserved memory node secure_display_region [ 10.568838] ION heap system created [ 10.573649] ION heap adsp created at 0x00000000eac00000 with size 800000 [ 10.580569] ION heap secure_heap created [ 10.584668] ION heap user_contig created at 0x00000000fec00000 with size 1000000 [ 10.592308] ION heap qsecom created at 0x00000000eb400000 with size 1400000 [ 10.599504] ION heap qsecom_ta created at 0x00000000fbc00000 with size 1000000 [ 10.606958] ION heap spss created at 0x00000000ecc00000 with size 1000000 [ 10.613965] ION heap secure_display created at 0x00000000f1800000 with size a400000 [ 10.666553] platform soc:qcom,ion:qcom,ion-heap@14: ion_secure_carveout: creating heap@0x8bf00000, size 0x4600000 [ 10.677156] ION heap secure_carveout created [ 10.685359] PMIC@SID4: PM8150L v3.0 options: 0, 0, 0, 0 [ 10.691070] PMIC@SID10: (null) v3.0 options: 0, 0, 0, 0 [ 10.698136] register_client_adhoc:find path.src 90 dest 770 [ 10.699458] register_client_adhoc:find path.src 129 dest 512 [ 10.705622] register_client_adhoc:find path.src 90 dest 585 [ 10.713081] register_client_adhoc:find path.src 1 dest 676 [ 10.720008] register_client_adhoc:find path.src 143 dest 777 [ 10.726041] register_client_adhoc:Client handle 12 ipa [ 10.737443] ipa 1e00000.qcom,ipa:ipa_smmu_ap: Linked as a consumer to 15000000.apps-smmu [ 10.764351] iommu: Adding device 1e00000.qcom,ipa:ipa_smmu_ap to group 0 [ 10.772568] ipa 1e00000.qcom,ipa:ipa_smmu_wlan: Linked as a consumer to 15000000.apps-smmu [ 10.793797] iommu: Adding device 1e00000.qcom,ipa:ipa_smmu_wlan to group 1 [ 10.802319] ipa 1e00000.qcom,ipa:ipa_smmu_uc: Linked as a consumer to 15000000.apps-smmu [ 10.824167] iommu: Adding device 1e00000.qcom,ipa:ipa_smmu_uc to group 2 [ 10.832519] ipa 1e00000.qcom,ipa:ipa_smmu_11ad: Linked as a consumer to 15000000.apps-smmu [ 10.854258] iommu: Adding device 1e00000.qcom,ipa:ipa_smmu_11ad to group 3 [ 10.875074] devfreq-qcom-fw 18590000.qcom,devfreq-l3:qcom,cpu0-cpu-l3-lat: Devfreq QCOM Firmware dev registered. [ 10.890557] devfreq-qcom-fw 18590000.qcom,devfreq-l3:qcom,cpu4-cpu-l3-lat: Devfreq QCOM Firmware dev registered. [ 10.905826] devfreq-qcom-fw 18590000.qcom,devfreq-l3:qcom,cpu7-cpu-l3-lat: Devfreq QCOM Firmware dev registered. [ 10.921135] devfreq-qcom-fw 18590000.qcom,devfreq-l3:qcom,cdsp-cdsp-l3-lat: Devfreq QCOM Firmware dev registered. [ 10.931760] devfreq-qcom-fw 18590000.qcom,devfreq-l3: Devfreq QCOM Firmware parent dev inited. [ 10.943174] SDAM base=0xb100 size=128 registered successfully [ 10.949507] esoc bus registration done [ 10.949664] Advanced Linux Sound Architecture Driver Initialized. [ 10.958226] Bluetooth: Core ver 2.22 [ 10.962004] NET: Registered protocol family 31 [ 10.966600] Bluetooth: HCI device and connection manager initialized [ 10.973188] Bluetooth: HCI socket layer initialized [ 10.978234] Bluetooth: L2CAP socket layer initialized [ 10.983561] Bluetooth: SCO socket layer initialized [ 10.988746] NetLabel: Initializing [ 10.992278] NetLabel: domain hash size = 128 [ 10.996791] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 11.002823] NetLabel: unlabeled traffic allowed by default [ 11.008837] pcie:pcie_init. [ 11.016772] register_client_adhoc:find path.src 45 dest 512 [ 11.018025] register_client_adhoc:Client handle 13 pcie0 [ 11.024310] pci-msm 1c00000.qcom,pcie: 1c00000.qcom,pcie supply vreg-3p3 not found, using dummy regulator [ 11.039944] pci-msm 1c00000.qcom,pcie: Linked as a consumer to regulator.0 [ 11.047246] pci-msm 1c00000.qcom,pcie: Linked as a consumer to regulator.18 [ 11.054611] pci-msm 1c00000.qcom,pcie: Linked as a consumer to regulator.13 [ 11.061957] pci-msm 1c00000.qcom,pcie: Linked as a consumer to regulator.4 [ 11.069310] pci-msm 1c00000.qcom,pcie: Linked as a consumer to regulator.59 [ 11.077166] msm_pcie_get_reg: PCIe: RC0: no tcsr resource found. [ 11.083379] msm_pcie_get_reg: PCIe: RC0: no rumi resource found. [ 11.090291] ------------[ cut here ]------------ [ 11.095066] invalid GPIO -2 [ 11.098021] WARNING: CPU: 7 PID: 1 at drivers/gpio/gpiolib.c:123 gpio_to_desc+0xac/0xc0 [ 11.106265] Modules linked in: [ 11.109442] CPU: 7 PID: 1 Comm: swapper/0 Tainted: G S 4.19.157+ #1 [ 11.117228] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 11.124664] pstate: 60800005 (nZCv daif -PAN +UAO) [ 11.129601] pc : gpio_to_desc+0xac/0xc0 [ 11.133567] lr : gpio_to_desc+0xa8/0xc0 [ 11.137532] sp : ffffff800805b950 [ 11.140959] x29: ffffff800805b950 x28: ffffffa50e1352d0 [ 11.146437] x27: ffffffc97f1df820 x26: ffffffa50e135a7c [ 11.151915] x25: ffffffc96f793c80 x24: ffffffa50e1352d0 [ 11.157392] x23: ffffffa50e135a7c x22: ffffffc96a7bf160 [ 11.162869] x21: ffffffa50bd0deb7 x20: ffffffa50ca06208 [ 11.168345] x19: 00000000fffffffe x18: 0000000000000020 [ 11.173822] x17: ffffffa50d8f4000 x16: 000000000000003a [ 11.179299] x15: ffffffa50b4cf150 x14: 0000000000003636 [ 11.184777] x13: 0000000000000004 x12: 000000000c9df994 [ 11.190254] x11: 0000000000000015 x10: 000000000682aaab [ 11.195732] x9 : 450514ed24766500 x8 : 450514ed24766500 [ 11.201209] x7 : ffffffa509d82700 x6 : 0000000000000000 [ 11.206685] x5 : 0000000000000080 x4 : 0000000000000001 [ 11.212162] x3 : ffffff800805b578 x2 : ffffffa509c97b48 [ 11.217640] x1 : ffffffa509d82874 x0 : 0000000000000000 [ 11.223119] Call trace: [ 11.225657] gpio_to_desc+0xac/0xc0 [ 11.229265] gpio_request+0x20/0x48 [ 11.232872] msm_pcie_probe+0x4ca8/0x5418 [ 11.237021] platform_drv_probe+0x80/0xb8 [ 11.241166] really_probe+0x4e0/0x6b0 [ 11.244949] driver_probe_device+0x74/0x148 [ 11.249271] __driver_attach+0x120/0x1d8 [ 11.253328] bus_for_each_dev+0x84/0xd0 [ 11.257294] driver_attach+0x2c/0x38 [ 11.260989] bus_add_driver+0x144/0x268 [ 11.264954] driver_register+0x78/0x110 [ 11.268921] __platform_driver_register+0x4c/0x58 [ 11.273775] pcie_init+0x7b8/0x804 [ 11.277294] do_one_initcall+0x1ac/0x3c8 [ 11.281350] kernel_init_freeable+0x470/0x53c [ 11.285854] kernel_init+0x18/0x298 [ 11.289458] ret_from_fork+0x10/0x1c [ 11.293153] irq event stamp: 1088536 [ 11.296850] hardirqs last enabled at (1088535): [] console_unlock+0x4bc/0x568 [ 11.305890] hardirqs last disabled at (1088536): [] do_debug_exception+0x84/0x150 [ 11.315196] softirqs last enabled at (1088532): [] __do_softirq+0x50c/0x554 [ 11.324053] softirqs last disabled at (1088523): [] irq_exit+0xfc/0x120 [ 11.332469] ---[ end trace 1d70a345b84a86e5 ]--- [ 11.337314] Can request power-phy-gpio\x0a! [ 11.337316] ------------[ cut here ]------------ [ 11.347572] invalid GPIO -2 [ 11.350509] WARNING: CPU: 7 PID: 1 at drivers/gpio/gpiolib.c:123 gpio_to_desc+0xac/0xc0 [ 11.358738] Modules linked in: [ 11.361905] CPU: 7 PID: 1 Comm: swapper/0 Tainted: G S W 4.19.157+ #1 [ 11.369690] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 11.377125] pstate: 60800005 (nZCv daif -PAN +UAO) [ 11.382060] pc : gpio_to_desc+0xac/0xc0 [ 11.386026] lr : gpio_to_desc+0xa8/0xc0 [ 11.389991] sp : ffffff800805b970 [ 11.393417] x29: ffffff800805b970 x28: ffffffa50e1352d0 [ 11.398893] x27: ffffffc97f1df820 x26: ffffffa50e135a7c [ 11.404371] x25: ffffffc96f793c80 x24: ffffffa50e1352d0 [ 11.409849] x23: ffffffa50e135a7c x22: ffffffc96a7bf160 [ 11.415326] x21: ffffffa50bd0deb7 x20: ffffffa50ca06208 [ 11.420802] x19: 00000000fffffffe x18: 0000000000000020 [ 11.426281] x17: ffffffa50d8f4000 x16: 000000000000003a [ 11.431760] x15: ffffffa50b4cf150 x14: 0000000000003732 [ 11.437237] x13: 0000000000000004 x12: 000000000ce7f495 [ 11.442714] x11: 0000000000000015 x10: 000000000682aaab [ 11.448192] x9 : 450514ed24766500 x8 : 450514ed24766500 [ 11.453669] x7 : ffffffa509d82700 x6 : 0000000000000000 [ 11.459148] x5 : 0000000000000080 x4 : 0000000000000001 [ 11.464625] x3 : ffffff800805b598 x2 : ffffffa509c97b48 [ 11.470100] x1 : ffffffa509d82874 x0 : 0000000000000000 [ 11.475578] Call trace: [ 11.478117] gpio_to_desc+0xac/0xc0 [ 11.481723] msm_pcie_probe+0x4cdc/0x5418 [ 11.485867] platform_drv_probe+0x80/0xb8 [ 11.490011] really_probe+0x4e0/0x6b0 [ 11.493794] driver_probe_device+0x74/0x148 [ 11.498116] __driver_attach+0x120/0x1d8 [ 11.502171] bus_for_each_dev+0x84/0xd0 [ 11.506138] driver_attach+0x2c/0x38 [ 11.509830] bus_add_driver+0x144/0x268 [ 11.513796] driver_register+0x78/0x110 [ 11.517762] __platform_driver_register+0x4c/0x58 [ 11.522609] pcie_init+0x7b8/0x804 [ 11.526125] do_one_initcall+0x1ac/0x3c8 [ 11.530180] kernel_init_freeable+0x470/0x53c [ 11.534679] kernel_init+0x18/0x298 [ 11.538283] ret_from_fork+0x10/0x1c [ 11.541976] irq event stamp: 1088618 [ 11.545669] hardirqs last enabled at (1088617): [] console_unlock+0x4bc/0x568 [ 11.554710] hardirqs last disabled at (1088618): [] do_debug_exception+0x84/0x150 [ 11.564017] softirqs last enabled at (1088614): [] __do_softirq+0x50c/0x554 [ 11.572873] softirqs last disabled at (1088603): [] irq_exit+0xfc/0x120 [ 11.581285] ---[ end trace 1d70a345b84a86e6 ]--- [ 11.586107] Set power-phy-gpio success\x0a! [ 11.586131] ------------[ cut here ]------------ [ 11.596402] invalid GPIO -2 [ 11.599311] WARNING: CPU: 7 PID: 1 at drivers/gpio/gpiolib.c:123 gpio_to_desc+0xac/0xc0 [ 11.607552] Modules linked in: [ 11.610720] CPU: 7 PID: 1 Comm: swapper/0 Tainted: G S W 4.19.157+ #1 [ 11.618503] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 11.625939] pstate: 60800005 (nZCv daif -PAN +UAO) [ 11.630874] pc : gpio_to_desc+0xac/0xc0 [ 11.634840] lr : gpio_to_desc+0xa8/0xc0 [ 11.638805] sp : ffffff800805b950 [ 11.642230] x29: ffffff800805b950 x28: ffffffa50e1352d0 [ 11.647706] x27: ffffffc97f1df820 x26: ffffffa50e135a7c [ 11.653184] x25: ffffffc96f793c80 x24: ffffffa50e1352d0 [ 11.658661] x23: ffffffa50e135a7c x22: ffffffc96a7bf160 [ 11.664139] x21: ffffffa50bd0df45 x20: ffffffa50ca06208 [ 11.669615] x19: 00000000fffffffe x18: 0000000000000020 [ 11.675091] x17: ffffffa50d8f4000 x16: 000000000000003a [ 11.680567] x15: ffffffa50b4cf150 x14: 0000000000003032 [ 11.686044] x13: 0000000000000004 x12: 000000000d30d8ee [ 11.691519] x11: 0000000000000015 x10: 000000000682aaab [ 11.696996] x9 : 450514ed24766500 x8 : 450514ed24766500 [ 11.702472] x7 : ffffffa509d82700 x6 : 0000000000000000 [ 11.707949] x5 : 0000000000000080 x4 : 0000000000000001 [ 11.713426] x3 : ffffff800805b578 x2 : ffffffa509c97b48 [ 11.718903] x1 : ffffffa509d82874 x0 : 0000000000000000 [ 11.724378] Call trace: [ 11.726917] gpio_to_desc+0xac/0xc0 [ 11.730523] gpio_request+0x20/0x48 [ 11.734129] msm_pcie_probe+0x4d2c/0x5418 [ 11.738272] platform_drv_probe+0x80/0xb8 [ 11.742416] really_probe+0x4e0/0x6b0 [ 11.746198] driver_probe_device+0x74/0x148 [ 11.750519] __driver_attach+0x120/0x1d8 [ 11.754575] bus_for_each_dev+0x84/0xd0 [ 11.758542] driver_attach+0x2c/0x38 [ 11.762234] bus_add_driver+0x144/0x268 [ 11.766203] driver_register+0x78/0x110 [ 11.770169] __platform_driver_register+0x4c/0x58 [ 11.775015] pcie_init+0x7b8/0x804 [ 11.778530] do_one_initcall+0x1ac/0x3c8 [ 11.782586] kernel_init_freeable+0x470/0x53c [ 11.787084] kernel_init+0x18/0x298 [ 11.790688] ret_from_fork+0x10/0x1c [ 11.794381] irq event stamp: 1088720 [ 11.798073] hardirqs last enabled at (1088719): [] console_unlock+0x4bc/0x568 [ 11.807110] hardirqs last disabled at (1088720): [] do_debug_exception+0x84/0x150 [ 11.816419] softirqs last enabled at (1088708): [] __do_softirq+0x50c/0x554 [ 11.825274] softirqs last disabled at (1088699): [] irq_exit+0xfc/0x120 [ 11.833685] ---[ end trace 1d70a345b84a86e7 ]--- [ 11.838591] ------------[ cut here ]------------ [ 11.843365] invalid GPIO -2 [ 11.846285] WARNING: CPU: 7 PID: 1 at drivers/gpio/gpiolib.c:123 gpio_to_desc+0xac/0xc0 [ 11.854513] Modules linked in: [ 11.857682] CPU: 7 PID: 1 Comm: swapper/0 Tainted: G S W 4.19.157+ #1 [ 11.865466] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 11.872900] pstate: 60800005 (nZCv daif -PAN +UAO) [ 11.877835] pc : gpio_to_desc+0xac/0xc0 [ 11.881802] lr : gpio_to_desc+0xa8/0xc0 [ 11.885768] sp : ffffff800805b970 [ 11.889194] x29: ffffff800805b970 x28: ffffffa50e1352d0 [ 11.894672] x27: ffffffc97f1df820 x26: ffffffa50e135a7c [ 11.900151] x25: ffffffc96f793c80 x24: ffffffa50e1352d0 [ 11.905629] x23: ffffffa50e135a7c x22: ffffffc96a7bf160 [ 11.911105] x21: ffffffa50bd0df45 x20: ffffffa50ca06208 [ 11.916582] x19: 00000000fffffffe x18: 0000000000000020 [ 11.922059] x17: ffffffa50d8f4000 x16: 000000000000003a [ 11.927535] x15: ffffffa50b4cf150 x14: 0000000000003635 [ 11.933011] x13: 0000000000000004 x12: 000000000d7933f6 [ 11.938488] x11: 0000000000000015 x10: 000000000682aaab [ 11.943964] x9 : 450514ed24766500 x8 : 450514ed24766500 [ 11.949441] x7 : ffffffa509d82700 x6 : 0000000000000000 [ 11.954919] x5 : 0000000000000080 x4 : 0000000000000001 [ 11.960397] x3 : ffffff800805b598 x2 : ffffffa509c97b48 [ 11.965875] x1 : ffffffa509d82874 x0 : 0000000000000000 [ 11.971353] Call trace: [ 11.973893] gpio_to_desc+0xac/0xc0 [ 11.977497] msm_pcie_probe+0x4d38/0x5418 [ 11.981640] platform_drv_probe+0x80/0xb8 [ 11.985784] really_probe+0x4e0/0x6b0 [ 11.989566] driver_probe_device+0x74/0x148 [ 11.993888] __driver_attach+0x120/0x1d8 [ 11.997944] bus_for_each_dev+0x84/0xd0 [ 12.001909] driver_attach+0x2c/0x38 [ 12.005602] bus_add_driver+0x144/0x268 [ 12.009569] driver_register+0x78/0x110 [ 12.013537] __platform_driver_register+0x4c/0x58 [ 12.018396] pcie_init+0x7b8/0x804 [ 12.021911] do_one_initcall+0x1ac/0x3c8 [ 12.025966] kernel_init_freeable+0x470/0x53c [ 12.030464] kernel_init+0x18/0x298 [ 12.034068] ret_from_fork+0x10/0x1c [ 12.037761] irq event stamp: 1088782 [ 12.041454] hardirqs last enabled at (1088781): [] console_unlock+0x4bc/0x568 [ 12.050493] hardirqs last disabled at (1088782): [] do_debug_exception+0x84/0x150 [ 12.059800] softirqs last enabled at (1088778): [] __do_softirq+0x50c/0x554 [ 12.068655] softirqs last disabled at (1088769): [] irq_exit+0xfc/0x120 [ 12.077067] ---[ end trace 1d70a345b84a86e8 ]--- [ 12.081931] ------------[ cut here ]------------ [ 12.086705] invalid GPIO -2 [ 12.089638] WARNING: CPU: 7 PID: 1 at drivers/gpio/gpiolib.c:123 gpio_to_desc+0xac/0xc0 [ 12.097867] Modules linked in: [ 12.101036] CPU: 7 PID: 1 Comm: swapper/0 Tainted: G S W 4.19.157+ #1 [ 12.108819] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 12.116254] pstate: 60800005 (nZCv daif -PAN +UAO) [ 12.121189] pc : gpio_to_desc+0xac/0xc0 [ 12.125155] lr : gpio_to_desc+0xa8/0xc0 [ 12.129121] sp : ffffff800805b950 [ 12.132548] x29: ffffff800805b950 x28: ffffffa50e1352d0 [ 12.138025] x27: ffffffc97f1df820 x26: ffffffa50e135a7c [ 12.143502] x25: ffffffc96f793c80 x24: ffffffa50e1352d0 [ 12.148979] x23: ffffffa50e135a7c x22: ffffffc96a7bf160 [ 12.154456] x21: ffffffa50bd93704 x20: ffffffa50ca06208 [ 12.159932] x19: 00000000fffffffe x18: 0000000000000020 [ 12.165409] x17: ffffffa50d8f4000 x16: 000000000000003a [ 12.170885] x15: ffffffa50b4cf150 x14: 0000000000003035 [ 12.176363] x13: 0000000000000004 x12: 000000000dc07f6f [ 12.181841] x11: 0000000000000015 x10: 000000000682aaab [ 12.187318] x9 : 450514ed24766500 x8 : 450514ed24766500 [ 12.192793] x7 : ffffffa509d82700 x6 : 0000000000000000 [ 12.198270] x5 : 0000000000000080 x4 : 0000000000000001 [ 12.203746] x3 : ffffff800805b578 x2 : ffffffa509c97b48 [ 12.209221] x1 : ffffffa509d82874 x0 : 0000000000000000 [ 12.214699] Call trace: [ 12.217238] gpio_to_desc+0xac/0xc0 [ 12.220842] gpio_request+0x20/0x48 [ 12.224446] msm_pcie_probe+0x4d70/0x5418 [ 12.228590] platform_drv_probe+0x80/0xb8 [ 12.232736] really_probe+0x4e0/0x6b0 [ 12.236519] driver_probe_device+0x74/0x148 [ 12.240841] __driver_attach+0x120/0x1d8 [ 12.244896] bus_for_each_dev+0x84/0xd0 [ 12.248862] driver_attach+0x2c/0x38 [ 12.252555] bus_add_driver+0x144/0x268 [ 12.256523] driver_register+0x78/0x110 [ 12.260490] __platform_driver_register+0x4c/0x58 [ 12.265337] pcie_init+0x7b8/0x804 [ 12.268851] do_one_initcall+0x1ac/0x3c8 [ 12.272906] kernel_init_freeable+0x470/0x53c [ 12.277406] kernel_init+0x18/0x298 [ 12.281009] ret_from_fork+0x10/0x1c [ 12.284701] irq event stamp: 1088882 [ 12.288394] hardirqs last enabled at (1088881): [] console_unlock+0x4bc/0x568 [ 12.297433] hardirqs last disabled at (1088882): [] do_debug_exception+0x84/0x150 [ 12.306740] softirqs last enabled at (1088878): [] __do_softirq+0x50c/0x554 [ 12.315594] softirqs last disabled at (1088867): [] irq_exit+0xfc/0x120 [ 12.324004] ---[ end trace 1d70a345b84a86e9 ]--- [ 12.328852] ------------[ cut here ]------------ [ 12.333623] invalid GPIO -2 [ 12.336543] WARNING: CPU: 7 PID: 1 at drivers/gpio/gpiolib.c:123 gpio_to_desc+0xac/0xc0 [ 12.344771] Modules linked in: [ 12.347939] CPU: 7 PID: 1 Comm: swapper/0 Tainted: G S W 4.19.157+ #1 [ 12.355722] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 12.363158] pstate: 60800005 (nZCv daif -PAN +UAO) [ 12.368107] pc : gpio_to_desc+0xac/0xc0 [ 12.372074] lr : gpio_to_desc+0xa8/0xc0 [ 12.376040] sp : ffffff800805b970 [ 12.379465] x29: ffffff800805b970 x28: ffffffa50e1352d0 [ 12.384940] x27: ffffffc97f1df820 x26: ffffffa50e135a7c [ 12.390416] x25: ffffffc96f793c80 x24: ffffffa50e1352d0 [ 12.395893] x23: ffffffa50e135a7c x22: ffffffc96a7bf160 [ 12.401371] x21: ffffffa50bd93704 x20: ffffffa50ca06208 [ 12.406847] x19: 00000000fffffffe x18: 0000000000000020 [ 12.412324] x17: ffffffa50d8f4000 x16: 000000000000003a [ 12.417801] x15: ffffffa50b4cf150 x14: 0000000000003233 [ 12.423279] x13: 0000000000000004 x12: 000000000e08d556 [ 12.428755] x11: 0000000000000015 x10: 000000000682aaab [ 12.434232] x9 : 450514ed24766500 x8 : 450514ed24766500 [ 12.439708] x7 : ffffffa509d82700 x6 : 0000000000000000 [ 12.445185] x5 : 0000000000000080 x4 : 0000000000000001 [ 12.450663] x3 : ffffff800805b598 x2 : ffffffa509c97b48 [ 12.456139] x1 : ffffffa509d82874 x0 : 0000000000000000 [ 12.461616] Call trace: [ 12.464156] gpio_to_desc+0xac/0xc0 [ 12.467760] msm_pcie_probe+0x4d7c/0x5418 [ 12.471904] platform_drv_probe+0x80/0xb8 [ 12.476048] really_probe+0x4e0/0x6b0 [ 12.479831] driver_probe_device+0x74/0x148 [ 12.484153] __driver_attach+0x120/0x1d8 [ 12.488207] bus_for_each_dev+0x84/0xd0 [ 12.492174] driver_attach+0x2c/0x38 [ 12.495867] bus_add_driver+0x144/0x268 [ 12.499833] driver_register+0x78/0x110 [ 12.503798] __platform_driver_register+0x4c/0x58 [ 12.508645] pcie_init+0x7b8/0x804 [ 12.512160] do_one_initcall+0x1ac/0x3c8 [ 12.516215] kernel_init_freeable+0x470/0x53c [ 12.520714] kernel_init+0x18/0x298 [ 12.524319] ret_from_fork+0x10/0x1c [ 12.528010] irq event stamp: 1088944 [ 12.531705] hardirqs last enabled at (1088943): [] console_unlock+0x4bc/0x568 [ 12.540747] hardirqs last disabled at (1088944): [] do_debug_exception+0x84/0x150 [ 12.550052] softirqs last enabled at (1088940): [] __do_softirq+0x50c/0x554 [ 12.558908] softirqs last disabled at (1088931): [] irq_exit+0xfc/0x120 [ 12.567318] ---[ end trace 1d70a345b84a86ea ]--- [ 12.572173] ------------[ cut here ]------------ [ 12.576946] invalid GPIO -2 [ 12.579853] WARNING: CPU: 7 PID: 1 at drivers/gpio/gpiolib.c:123 gpio_to_desc+0xac/0xc0 [ 12.588080] Modules linked in: [ 12.591249] CPU: 7 PID: 1 Comm: swapper/0 Tainted: G S W 4.19.157+ #1 [ 12.599030] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 12.606466] pstate: 60800005 (nZCv daif -PAN +UAO) [ 12.611415] pc : gpio_to_desc+0xac/0xc0 [ 12.615382] lr : gpio_to_desc+0xa8/0xc0 [ 12.619349] sp : ffffff800805b950 [ 12.622775] x29: ffffff800805b950 x28: ffffffa50e1352d0 [ 12.628252] x27: ffffffc97f1df820 x26: ffffffa50e135a7c [ 12.633728] x25: ffffffc96f793c80 x24: ffffffa50e1352d0 [ 12.639206] x23: ffffffa50e135a7c x22: ffffffc96a7bf160 [ 12.644683] x21: ffffffa50bd0dfd0 x20: ffffffa50ca06208 [ 12.650161] x19: 00000000fffffffe x18: 0000000000000020 [ 12.655639] x17: ffffffa50d8f4000 x16: 000000000000003a [ 12.661115] x15: ffffffa50b4cf150 x14: 0000000000003436 [ 12.666591] x13: 0000000000000004 x12: 000000000e501d9e [ 12.672067] x11: 0000000000000015 x10: 000000000682aaab [ 12.677543] x9 : 450514ed24766500 x8 : 450514ed24766500 [ 12.683020] x7 : ffffffa509d82700 x6 : 0000000000000000 [ 12.688496] x5 : 0000000000000080 x4 : 0000000000000001 [ 12.693974] x3 : ffffff800805b578 x2 : ffffffa509c97b48 [ 12.699451] x1 : ffffffa509d82874 x0 : 0000000000000000 [ 12.704928] Call trace: [ 12.707467] gpio_to_desc+0xac/0xc0 [ 12.711072] gpio_request+0x20/0x48 [ 12.714677] msm_pcie_probe+0x4db4/0x5418 [ 12.718819] platform_drv_probe+0x80/0xb8 [ 12.722964] really_probe+0x4e0/0x6b0 [ 12.726747] driver_probe_device+0x74/0x148 [ 12.731069] __driver_attach+0x120/0x1d8 [ 12.735124] bus_for_each_dev+0x84/0xd0 [ 12.739091] driver_attach+0x2c/0x38 [ 12.742784] bus_add_driver+0x144/0x268 [ 12.746750] driver_register+0x78/0x110 [ 12.750716] __platform_driver_register+0x4c/0x58 [ 12.755564] pcie_init+0x7b8/0x804 [ 12.759079] do_one_initcall+0x1ac/0x3c8 [ 12.763136] kernel_init_freeable+0x470/0x53c [ 12.767634] kernel_init+0x18/0x298 [ 12.771239] ret_from_fork+0x10/0x1c [ 12.774931] irq event stamp: 1089028 [ 12.778624] hardirqs last enabled at (1089027): [] console_unlock+0x4bc/0x568 [ 12.787662] hardirqs last disabled at (1089028): [] do_debug_exception+0x84/0x150 [ 12.796968] softirqs last enabled at (1089016): [] __do_softirq+0x50c/0x554 [ 12.805822] softirqs last disabled at (1089007): [] irq_exit+0xfc/0x120 [ 12.814234] ---[ end trace 1d70a345b84a86eb ]--- [ 12.819077] ------------[ cut here ]------------ [ 12.823850] invalid GPIO -2 [ 12.826769] WARNING: CPU: 7 PID: 1 at drivers/gpio/gpiolib.c:123 gpio_to_desc+0xac/0xc0 [ 12.834997] Modules linked in: [ 12.838166] CPU: 7 PID: 1 Comm: swapper/0 Tainted: G S W 4.19.157+ #1 [ 12.845960] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 12.853396] pstate: 60800005 (nZCv daif -PAN +UAO) [ 12.858332] pc : gpio_to_desc+0xac/0xc0 [ 12.862299] lr : gpio_to_desc+0xa8/0xc0 [ 12.866265] sp : ffffff800805b970 [ 12.869690] x29: ffffff800805b970 x28: ffffffa50e1352d0 [ 12.875169] x27: ffffffc97f1df820 x26: ffffffa50e135a7c [ 12.880646] x25: ffffffc96f793c80 x24: ffffffa50e1352d0 [ 12.886123] x23: ffffffa50e135a7c x22: ffffffc96a7bf160 [ 12.891601] x21: ffffffa50bd0dfd0 x20: ffffffa50ca06208 [ 12.897080] x19: 00000000fffffffe x18: 0000000000000020 [ 12.902557] x17: ffffffa50d8f4000 x16: 000000000000003a [ 12.908035] x15: ffffffa50b4cf150 x14: 0000000000003530 [ 12.913512] x13: 0000000000000004 x12: 000000000e98745f [ 12.918988] x11: 0000000000000015 x10: 000000000682aaab [ 12.924466] x9 : 450514ed24766500 x8 : 450514ed24766500 [ 12.929944] x7 : ffffffa509d82700 x6 : 0000000000000000 [ 12.935419] x5 : 0000000000000080 x4 : 0000000000000001 [ 12.940896] x3 : ffffff800805b598 x2 : ffffffa509c97b48 [ 12.946372] x1 : ffffffa509d82874 x0 : 0000000000000000 [ 12.951849] Call trace: [ 12.954388] gpio_to_desc+0xac/0xc0 [ 12.957992] msm_pcie_probe+0x4dc0/0x5418 [ 12.962135] platform_drv_probe+0x80/0xb8 [ 12.966280] really_probe+0x4e0/0x6b0 [ 12.970062] driver_probe_device+0x74/0x148 [ 12.974385] __driver_attach+0x120/0x1d8 [ 12.978441] bus_for_each_dev+0x84/0xd0 [ 12.982407] driver_attach+0x2c/0x38 [ 12.986100] bus_add_driver+0x144/0x268 [ 12.990068] driver_register+0x78/0x110 [ 12.994035] __platform_driver_register+0x4c/0x58 [ 12.998882] pcie_init+0x7b8/0x804 [ 13.002397] do_one_initcall+0x1ac/0x3c8 [ 13.006451] kernel_init_freeable+0x470/0x53c [ 13.010951] kernel_init+0x18/0x298 [ 13.014556] ret_from_fork+0x10/0x1c [ 13.018248] irq event stamp: 1089092 [ 13.021941] hardirqs last enabled at (1089091): [] console_unlock+0x4bc/0x568 [ 13.030980] hardirqs last disabled at (1089092): [] do_debug_exception+0x84/0x150 [ 13.040286] softirqs last enabled at (1089088): [] __do_softirq+0x50c/0x554 [ 13.049143] softirqs last disabled at (1089079): [] irq_exit+0xfc/0x120 [ 13.057554] ---[ end trace 1d70a345b84a86ec ]--- [ 13.062397] ------------[ cut here ]------------ [ 13.067170] invalid GPIO -2 [ 13.070104] WARNING: CPU: 7 PID: 1 at drivers/gpio/gpiolib.c:123 gpio_to_desc+0xac/0xc0 [ 13.078334] Modules linked in: [ 13.081502] CPU: 7 PID: 1 Comm: swapper/0 Tainted: G S W 4.19.157+ #1 [ 13.089286] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 13.096722] pstate: 60800005 (nZCv daif -PAN +UAO) [ 13.101658] pc : gpio_to_desc+0xac/0xc0 [ 13.105624] lr : gpio_to_desc+0xa8/0xc0 [ 13.109590] sp : ffffff800805b950 [ 13.113016] x29: ffffff800805b950 x28: ffffffa50e1352d0 [ 13.118492] x27: ffffffc97f1df820 x26: ffffffa50e135a7c [ 13.123968] x25: ffffffc96f793c80 x24: ffffffa50e1352d0 [ 13.129444] x23: ffffffa50e135a7c x22: ffffffc96a7bf160 [ 13.134921] x21: ffffffa50bd0e017 x20: ffffffa50ca06208 [ 13.140399] x19: 00000000fffffffe x18: 0000000000000020 [ 13.145875] x17: ffffffa50d8f4000 x16: 000000000000003a [ 13.151352] x15: ffffffa50b4cf150 x14: 0000000000003730 [ 13.156829] x13: 0000000000000004 x12: 000000000edfbe73 [ 13.162306] x11: 0000000000000015 x10: 000000000682aaab [ 13.167783] x9 : 450514ed24766500 x8 : 450514ed24766500 [ 13.173258] x7 : ffffffa509d82700 x6 : 0000000000000000 [ 13.178734] x5 : 0000000000000080 x4 : 0000000000000001 [ 13.184209] x3 : ffffff800805b578 x2 : ffffffa509c97b48 [ 13.189686] x1 : ffffffa509d82874 x0 : 0000000000000000 [ 13.195163] Call trace: [ 13.197702] gpio_to_desc+0xac/0xc0 [ 13.201306] gpio_request+0x20/0x48 [ 13.204911] msm_pcie_probe+0x4df8/0x5418 [ 13.209055] platform_drv_probe+0x80/0xb8 [ 13.213198] really_probe+0x4e0/0x6b0 [ 13.216980] driver_probe_device+0x74/0x148 [ 13.221302] __driver_attach+0x120/0x1d8 [ 13.225357] bus_for_each_dev+0x84/0xd0 [ 13.229323] driver_attach+0x2c/0x38 [ 13.233016] bus_add_driver+0x144/0x268 [ 13.236983] driver_register+0x78/0x110 [ 13.240949] __platform_driver_register+0x4c/0x58 [ 13.245797] pcie_init+0x7b8/0x804 [ 13.249312] do_one_initcall+0x1ac/0x3c8 [ 13.253367] kernel_init_freeable+0x470/0x53c [ 13.257867] kernel_init+0x18/0x298 [ 13.261472] ret_from_fork+0x10/0x1c [ 13.265165] irq event stamp: 1089190 [ 13.268858] hardirqs last enabled at (1089189): [] console_unlock+0x4bc/0x568 [ 13.277899] hardirqs last disabled at (1089190): [] do_debug_exception+0x84/0x150 [ 13.287206] softirqs last enabled at (1089186): [] __do_softirq+0x50c/0x554 [ 13.296061] softirqs last disabled at (1089175): [] irq_exit+0xfc/0x120 [ 13.304472] ---[ end trace 1d70a345b84a86ed ]--- [ 13.309292] ------------[ cut here ]------------ [ 13.314064] invalid GPIO -2 [ 13.316982] WARNING: CPU: 7 PID: 1 at drivers/gpio/gpiolib.c:123 gpio_to_desc+0xac/0xc0 [ 13.325210] Modules linked in: [ 13.328379] CPU: 7 PID: 1 Comm: swapper/0 Tainted: G S W 4.19.157+ #1 [ 13.336164] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 13.343600] pstate: 60800005 (nZCv daif -PAN +UAO) [ 13.348534] pc : gpio_to_desc+0xac/0xc0 [ 13.352500] lr : gpio_to_desc+0xa8/0xc0 [ 13.356466] sp : ffffff800805b970 [ 13.359892] x29: ffffff800805b970 x28: ffffffa50e1352d0 [ 13.365368] x27: ffffffc97f1df820 x26: ffffffa50e135a7c [ 13.370846] x25: ffffffc96f793c80 x24: ffffffa50e1352d0 [ 13.376322] x23: ffffffa50e135a7c x22: ffffffc96a7bf160 [ 13.381800] x21: ffffffa50bd0e017 x20: ffffffa50ca06208 [ 13.387277] x19: 00000000fffffffe x18: 0000000000000020 [ 13.392754] x17: ffffffa50d8f4000 x16: 000000000000003a [ 13.398231] x15: ffffffa50b4cf150 x14: 0000000000003634 [ 13.403707] x13: 0000000000000004 x12: 000000000f281251 [ 13.409185] x11: 0000000000000015 x10: 000000000682aaab [ 13.414660] x9 : 450514ed24766500 x8 : 450514ed24766500 [ 13.420140] x7 : ffffffa509d82700 x6 : 0000000000000000 [ 13.425618] x5 : 0000000000000080 x4 : 0000000000000001 [ 13.431094] x3 : ffffff800805b598 x2 : ffffffa509c97b48 [ 13.436571] x1 : ffffffa509d82874 x0 : 0000000000000000 [ 13.442047] Call trace: [ 13.444587] gpio_to_desc+0xac/0xc0 [ 13.448191] msm_pcie_probe+0x4e04/0x5418 [ 13.452334] platform_drv_probe+0x80/0xb8 [ 13.456477] really_probe+0x4e0/0x6b0 [ 13.460259] driver_probe_device+0x74/0x148 [ 13.464581] __driver_attach+0x120/0x1d8 [ 13.468636] bus_for_each_dev+0x84/0xd0 [ 13.472602] driver_attach+0x2c/0x38 [ 13.476294] bus_add_driver+0x144/0x268 [ 13.480259] driver_register+0x78/0x110 [ 13.484226] __platform_driver_register+0x4c/0x58 [ 13.489073] pcie_init+0x7b8/0x804 [ 13.492589] do_one_initcall+0x1ac/0x3c8 [ 13.496644] kernel_init_freeable+0x470/0x53c [ 13.501144] kernel_init+0x18/0x298 [ 13.504749] ret_from_fork+0x10/0x1c [ 13.508440] irq event stamp: 1089252 [ 13.512131] hardirqs last enabled at (1089251): [] console_unlock+0x4bc/0x568 [ 13.521173] hardirqs last disabled at (1089252): [] do_debug_exception+0x84/0x150 [ 13.530479] softirqs last enabled at (1089248): [] __do_softirq+0x50c/0x554 [ 13.539334] softirqs last disabled at (1089239): [] irq_exit+0xfc/0x120 [ 13.547746] ---[ end trace 1d70a345b84a86ee ]--- [ 13.756348] ------------[ cut here ]------------ [ 13.761123] invalid GPIO -2 [ 13.764031] WARNING: CPU: 7 PID: 1 at drivers/gpio/gpiolib.c:123 gpio_to_desc+0xac/0xc0 [ 13.772271] Modules linked in: [ 13.775441] CPU: 7 PID: 1 Comm: swapper/0 Tainted: G S W 4.19.157+ #1 [ 13.783236] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 13.790673] pstate: 60800005 (nZCv daif -PAN +UAO) [ 13.795607] pc : gpio_to_desc+0xac/0xc0 [ 13.799574] lr : gpio_to_desc+0xa8/0xc0 [ 13.803541] sp : ffffff800805b970 [ 13.806967] x29: ffffff800805b970 x28: ffffffa50e1352d0 [ 13.812445] x27: ffffffc97f1df820 x26: ffffffa50e135a7c [ 13.817922] x25: ffffffc96f793c80 x24: ffffffa50e1352d0 [ 13.823399] x23: ffffffa50e135a7c x22: ffffffc96a7bf160 [ 13.828874] x21: ffffffa50bd0e017 x20: ffffffa50ca06208 [ 13.834350] x19: 00000000fffffffe x18: 0000000000000020 [ 13.839827] x17: ffffffa50d8f4000 x16: 000000000000003a [ 13.845304] x15: ffffffa50b4cf150 x14: 0000000000003233 [ 13.850780] x13: 0000000000000004 x12: 000000000fab0af8 [ 13.856259] x11: 0000000000000015 x10: 000000000682aaab [ 13.861735] x9 : 450514ed24766500 x8 : 450514ed24766500 [ 13.867212] x7 : ffffffa509d82700 x6 : 0000000000000000 [ 13.872690] x5 : 0000000000000080 x4 : 0000000000000001 [ 13.878167] x3 : ffffff800805b598 x2 : ffffffa509c97b48 [ 13.883643] x1 : ffffffa509d82874 x0 : 0000000000000000 [ 13.889120] Call trace: [ 13.891658] gpio_to_desc+0xac/0xc0 [ 13.895262] msm_pcie_probe+0x4e1c/0x5418 [ 13.899406] platform_drv_probe+0x80/0xb8 [ 13.903550] really_probe+0x4e0/0x6b0 [ 13.907333] driver_probe_device+0x74/0x148 [ 13.911654] __driver_attach+0x120/0x1d8 [ 13.915710] bus_for_each_dev+0x84/0xd0 [ 13.919677] driver_attach+0x2c/0x38 [ 13.923371] bus_add_driver+0x144/0x268 [ 13.927336] driver_register+0x78/0x110 [ 13.931303] __platform_driver_register+0x4c/0x58 [ 13.936149] pcie_init+0x7b8/0x804 [ 13.939664] do_one_initcall+0x1ac/0x3c8 [ 13.943719] kernel_init_freeable+0x470/0x53c [ 13.948218] kernel_init+0x18/0x298 [ 13.951822] ret_from_fork+0x10/0x1c [ 13.955515] irq event stamp: 1089314 [ 13.959209] hardirqs last enabled at (1089313): [] console_unlock+0x4bc/0x568 [ 13.968251] hardirqs last disabled at (1089314): [] do_debug_exception+0x84/0x150 [ 13.977559] softirqs last enabled at (1089302): [] __do_softirq+0x50c/0x554 [ 13.986415] softirqs last disabled at (1089291): [] irq_exit+0xfc/0x120 [ 13.994825] ---[ end trace 1d70a345b84a86ef ]--- [ 13.999679] ------------[ cut here ]------------ [ 14.004451] invalid GPIO -2 [ 14.007360] WARNING: CPU: 7 PID: 1 at drivers/gpio/gpiolib.c:123 gpio_to_desc+0xac/0xc0 [ 14.015587] Modules linked in: [ 14.018756] CPU: 7 PID: 1 Comm: swapper/0 Tainted: G S W 4.19.157+ #1 [ 14.026539] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 14.033974] pstate: 60800005 (nZCv daif -PAN +UAO) [ 14.038922] pc : gpio_to_desc+0xac/0xc0 [ 14.042888] lr : gpio_to_desc+0xa8/0xc0 [ 14.046853] sp : ffffff800805b950 [ 14.050280] x29: ffffff800805b950 x28: ffffffa50e1352d0 [ 14.055758] x27: ffffffc97f1df820 x26: ffffffa50e135a7c [ 14.061234] x25: ffffffc96f793c80 x24: ffffffa50e1352d0 [ 14.066713] x23: ffffffa50e135a7c x22: ffffffc96a7bf160 [ 14.072190] x21: ffffffa50bd0e061 x20: ffffffa50ca06208 [ 14.077666] x19: 00000000fffffffe x18: 0000000000000020 [ 14.083142] x17: ffffffa50d8f4000 x16: 000000000000003a [ 14.088621] x15: ffffffa50b4cf150 x14: 0000000000003531 [ 14.094097] x13: 0000000000000004 x12: 000000000ff254a5 [ 14.099574] x11: 0000000000000015 x10: 000000000682aaab [ 14.105050] x9 : 450514ed24766500 x8 : 450514ed24766500 [ 14.110526] x7 : ffffffa509d82700 x6 : 0000000000000000 [ 14.116004] x5 : 0000000000000080 x4 : 0000000000000001 [ 14.121481] x3 : ffffff800805b578 x2 : ffffffa509c97b48 [ 14.126958] x1 : ffffffa509d82874 x0 : 0000000000000000 [ 14.132434] Call trace: [ 14.134973] gpio_to_desc+0xac/0xc0 [ 14.138579] gpio_request+0x20/0x48 [ 14.142183] msm_pcie_probe+0x4e54/0x5418 [ 14.146327] platform_drv_probe+0x80/0xb8 [ 14.150471] really_probe+0x4e0/0x6b0 [ 14.154252] driver_probe_device+0x74/0x148 [ 14.158574] __driver_attach+0x120/0x1d8 [ 14.162629] bus_for_each_dev+0x84/0xd0 [ 14.166596] driver_attach+0x2c/0x38 [ 14.170289] bus_add_driver+0x144/0x268 [ 14.174254] driver_register+0x78/0x110 [ 14.178220] __platform_driver_register+0x4c/0x58 [ 14.183066] pcie_init+0x7b8/0x804 [ 14.186582] do_one_initcall+0x1ac/0x3c8 [ 14.190636] kernel_init_freeable+0x470/0x53c [ 14.195137] kernel_init+0x18/0x298 [ 14.198741] ret_from_fork+0x10/0x1c [ 14.202433] irq event stamp: 1089400 [ 14.206126] hardirqs last enabled at (1089399): [] console_unlock+0x4bc/0x568 [ 14.215165] hardirqs last disabled at (1089400): [] do_debug_exception+0x84/0x150 [ 14.224471] softirqs last enabled at (1089388): [] __do_softirq+0x50c/0x554 [ 14.233327] softirqs last disabled at (1089379): [] irq_exit+0xfc/0x120 [ 14.241739] ---[ end trace 1d70a345b84a86f0 ]--- [ 14.246581] ------------[ cut here ]------------ [ 14.251368] invalid GPIO -2 [ 14.254287] WARNING: CPU: 7 PID: 1 at drivers/gpio/gpiolib.c:123 gpio_to_desc+0xac/0xc0 [ 14.262516] Modules linked in: [ 14.265684] CPU: 7 PID: 1 Comm: swapper/0 Tainted: G S W 4.19.157+ #1 [ 14.273467] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 14.280902] pstate: 60800005 (nZCv daif -PAN +UAO) [ 14.285837] pc : gpio_to_desc+0xac/0xc0 [ 14.289803] lr : gpio_to_desc+0xa8/0xc0 [ 14.293769] sp : ffffff800805b970 [ 14.297195] x29: ffffff800805b970 x28: ffffffa50e1352d0 [ 14.302674] x27: ffffffc97f1df820 x26: ffffffa50e135a7c [ 14.308150] x25: ffffffc96f793c80 x24: ffffffa50e1352d0 [ 14.313627] x23: ffffffa50e135a7c x22: ffffffc96a7bf160 [ 14.319104] x21: ffffffa50bd0e061 x20: ffffffa50ca06208 [ 14.324581] x19: 00000000fffffffe x18: 0000000000000020 [ 14.330058] x17: ffffffa50d8f4000 x16: 000000000000003a [ 14.335536] x15: ffffffa50b4cf150 x14: 0000000000003638 [ 14.341011] x13: 0000000000000004 x12: 00000000103aac27 [ 14.346489] x11: 0000000000000015 x10: 000000000682aaab [ 14.351966] x9 : 450514ed24766500 x8 : 450514ed24766500 [ 14.357443] x7 : ffffffa509d82700 x6 : 0000000000000000 [ 14.362919] x5 : 0000000000000080 x4 : 0000000000000001 [ 14.368396] x3 : ffffff800805b598 x2 : ffffffa509c97b48 [ 14.373873] x1 : ffffffa509d82874 x0 : 0000000000000000 [ 14.379351] Call trace: [ 14.381890] gpio_to_desc+0xac/0xc0 [ 14.385494] msm_pcie_probe+0x4e60/0x5418 [ 14.389638] platform_drv_probe+0x80/0xb8 [ 14.393782] really_probe+0x4e0/0x6b0 [ 14.397563] driver_probe_device+0x74/0x148 [ 14.401886] __driver_attach+0x120/0x1d8 [ 14.405940] bus_for_each_dev+0x84/0xd0 [ 14.409907] driver_attach+0x2c/0x38 [ 14.413599] bus_add_driver+0x144/0x268 [ 14.417566] driver_register+0x78/0x110 [ 14.421532] __platform_driver_register+0x4c/0x58 [ 14.426379] pcie_init+0x7b8/0x804 [ 14.429895] do_one_initcall+0x1ac/0x3c8 [ 14.433950] kernel_init_freeable+0x470/0x53c [ 14.438449] kernel_init+0x18/0x298 [ 14.442054] ret_from_fork+0x10/0x1c [ 14.445746] irq event stamp: 1089466 [ 14.449439] hardirqs last enabled at (1089465): [] console_unlock+0x4bc/0x568 [ 14.458478] hardirqs last disabled at (1089466): [] do_debug_exception+0x84/0x150 [ 14.467784] softirqs last enabled at (1089462): [] __do_softirq+0x50c/0x554 [ 14.476640] softirqs last disabled at (1089453): [] irq_exit+0xfc/0x120 [ 14.485053] ---[ end trace 1d70a345b84a86f1 ]--- [ 14.692339] ------------[ cut here ]------------ [ 14.697113] invalid GPIO -2 [ 14.700020] WARNING: CPU: 7 PID: 1 at drivers/gpio/gpiolib.c:123 gpio_to_desc+0xac/0xc0 [ 14.708261] Modules linked in: [ 14.711430] CPU: 7 PID: 1 Comm: swapper/0 Tainted: G S W 4.19.157+ #1 [ 14.719212] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 14.726647] pstate: 60800005 (nZCv daif -PAN +UAO) [ 14.731582] pc : gpio_to_desc+0xac/0xc0 [ 14.735547] lr : gpio_to_desc+0xa8/0xc0 [ 14.739512] sp : ffffff800805b970 [ 14.742938] x29: ffffff800805b970 x28: ffffffa50e1352d0 [ 14.748414] x27: ffffffc97f1df820 x26: ffffffa50e135a7c [ 14.753892] x25: ffffffc96f793c80 x24: ffffffa50e1352d0 [ 14.759369] x23: ffffffa50e135a7c x22: ffffffc96a7bf160 [ 14.764846] x21: ffffffa50bd0e061 x20: ffffffa50ca06208 [ 14.770322] x19: 00000000fffffffe x18: 0000000000000020 [ 14.775800] x17: ffffffa50d8f4000 x16: 000000000000003a [ 14.781278] x15: ffffffa50b4cf150 x14: 0000000000003133 [ 14.786756] x13: 0000000000000004 x12: 0000000010bd4229 [ 14.792232] x11: 0000000000000015 x10: 000000000682aaab [ 14.797709] x9 : 450514ed24766500 x8 : 450514ed24766500 [ 14.803187] x7 : ffffffa509d82700 x6 : 0000000000000000 [ 14.808663] x5 : 0000000000000080 x4 : 0000000000000001 [ 14.814140] x3 : ffffff800805b598 x2 : ffffffa509c97b48 [ 14.819617] x1 : ffffffa509d82874 x0 : 0000000000000000 [ 14.825094] Call trace: [ 14.827633] gpio_to_desc+0xac/0xc0 [ 14.831237] msm_pcie_probe+0x4e78/0x5418 [ 14.835380] platform_drv_probe+0x80/0xb8 [ 14.839525] really_probe+0x4e0/0x6b0 [ 14.843308] driver_probe_device+0x74/0x148 [ 14.847630] __driver_attach+0x120/0x1d8 [ 14.851686] bus_for_each_dev+0x84/0xd0 [ 14.855653] driver_attach+0x2c/0x38 [ 14.859346] bus_add_driver+0x144/0x268 [ 14.863313] driver_register+0x78/0x110 [ 14.867279] __platform_driver_register+0x4c/0x58 [ 14.872127] pcie_init+0x7b8/0x804 [ 14.875642] do_one_initcall+0x1ac/0x3c8 [ 14.879698] kernel_init_freeable+0x470/0x53c [ 14.884197] kernel_init+0x18/0x298 [ 14.887801] ret_from_fork+0x10/0x1c [ 14.891496] irq event stamp: 1089524 [ 14.895189] hardirqs last enabled at (1089523): [] console_unlock+0x4bc/0x568 [ 14.904231] hardirqs last disabled at (1089524): [] do_debug_exception+0x84/0x150 [ 14.913537] softirqs last enabled at (1089512): [] __do_softirq+0x50c/0x554 [ 14.922394] softirqs last disabled at (1089503): [] irq_exit+0xfc/0x120 [ 14.930805] ---[ end trace 1d70a345b84a86f2 ]--- [ 14.936394] register_client_adhoc:find path.src 100 dest 512 [ 14.937488] register_client_adhoc:Client handle 14 pcie1 [ 14.943787] pci-msm 1c08000.qcom,pcie: 1c08000.qcom,pcie supply vreg-3p3 not found, using dummy regulator [ 14.959301] pci-msm 1c08000.qcom,pcie: Linked as a consumer to regulator.0 [ 14.966560] pci-msm 1c08000.qcom,pcie: Linked as a consumer to regulator.18 [ 14.973911] pci-msm 1c08000.qcom,pcie: Linked as a consumer to regulator.13 [ 14.981283] pci-msm 1c08000.qcom,pcie: Linked as a consumer to regulator.4 [ 14.988609] pci-msm 1c08000.qcom,pcie: Linked as a consumer to regulator.60 [ 14.996401] msm_pcie_get_reg: PCIe: RC1: no tcsr resource found. [ 15.002612] msm_pcie_get_reg: PCIe: RC1: no rumi resource found. [ 15.008843] msm_pcie_probe: PCIe: RC1 could not get pinctrl sleep state1 [ 15.016275] Can request power-phy-gpio\x0a! [ 15.016286] Set power-phy-gpio success\x0a! [ 15.021857] ------------[ cut here ]------------ [ 15.032128] invalid GPIO -2 [ 15.035092] WARNING: CPU: 7 PID: 1 at drivers/gpio/gpiolib.c:123 gpio_to_desc+0xac/0xc0 [ 15.043322] Modules linked in: [ 15.046492] CPU: 7 PID: 1 Comm: swapper/0 Tainted: G S W 4.19.157+ #1 [ 15.054276] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 15.061712] pstate: 60800005 (nZCv daif -PAN +UAO) [ 15.066648] pc : gpio_to_desc+0xac/0xc0 [ 15.070616] lr : gpio_to_desc+0xa8/0xc0 [ 15.074583] sp : ffffff800805b950 [ 15.078009] x29: ffffff800805b950 x28: ffffffa50e14b450 [ 15.083485] x27: ffffffc97f1e1ee0 x26: ffffffa50e14bbfc [ 15.088964] x25: ffffffc96f793280 x24: ffffffa50e1352d0 [ 15.094441] x23: ffffffa50e14bbfc x22: ffffffc94e16f560 [ 15.099918] x21: ffffffa50bd93704 x20: ffffffa50ca06208 [ 15.105395] x19: 00000000fffffffe x18: 0000000005f5e100 [ 15.110869] x17: 00000000013143af x16: 0000000000000007 [ 15.116345] x15: ffffffffff9849f0 x14: ffffffc806833080 [ 15.121823] x13: 0000000000000004 x12: 00000000111f6c12 [ 15.127301] x11: 0000000000000015 x10: 000000000682aaab [ 15.132779] x9 : 450514ed24766500 x8 : 450514ed24766500 [ 15.138257] x7 : ffffffa509d1cf70 x6 : 0000000000000000 [ 15.143733] x5 : 0000000000000080 x4 : 0000000000000001 [ 15.149211] x3 : ffffff800805b578 x2 : ffffffa509c97b48 [ 15.154688] x1 : ffffffa509d82874 x0 : 0000000000000000 [ 15.160165] Call trace: [ 15.162704] gpio_to_desc+0xac/0xc0 [ 15.166309] gpio_request+0x20/0x48 [ 15.169913] msm_pcie_probe+0x4d70/0x5418 [ 15.174057] platform_drv_probe+0x80/0xb8 [ 15.178203] really_probe+0x4e0/0x6b0 [ 15.181985] driver_probe_device+0x74/0x148 [ 15.186307] __driver_attach+0x120/0x1d8 [ 15.190361] bus_for_each_dev+0x84/0xd0 [ 15.194329] driver_attach+0x2c/0x38 [ 15.198022] bus_add_driver+0x144/0x268 [ 15.201989] driver_register+0x78/0x110 [ 15.205955] __platform_driver_register+0x4c/0x58 [ 15.210802] pcie_init+0x7b8/0x804 [ 15.214321] do_one_initcall+0x1ac/0x3c8 [ 15.218375] kernel_init_freeable+0x470/0x53c [ 15.222875] kernel_init+0x18/0x298 [ 15.226480] ret_from_fork+0x10/0x1c [ 15.230173] irq event stamp: 1096212 [ 15.233868] hardirqs last enabled at (1096211): [] _raw_spin_unlock_irq+0x34/0x68 [ 15.243266] hardirqs last disabled at (1096212): [] do_debug_exception+0x84/0x150 [ 15.252571] softirqs last enabled at (1096206): [] __do_softirq+0x50c/0x554 [ 15.261427] softirqs last disabled at (1096197): [] irq_exit+0xfc/0x120 [ 15.269839] ---[ end trace 1d70a345b84a86f3 ]--- [ 15.274666] ------------[ cut here ]------------ [ 15.279437] invalid GPIO -2 [ 15.282356] WARNING: CPU: 7 PID: 1 at drivers/gpio/gpiolib.c:123 gpio_to_desc+0xac/0xc0 [ 15.290585] Modules linked in: [ 15.293753] CPU: 7 PID: 1 Comm: swapper/0 Tainted: G S W 4.19.157+ #1 [ 15.301536] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 15.308971] pstate: 60800005 (nZCv daif -PAN +UAO) [ 15.313908] pc : gpio_to_desc+0xac/0xc0 [ 15.317874] lr : gpio_to_desc+0xa8/0xc0 [ 15.321841] sp : ffffff800805b970 [ 15.325266] x29: ffffff800805b970 x28: ffffffa50e14b450 [ 15.330744] x27: ffffffc97f1e1ee0 x26: ffffffa50e14bbfc [ 15.336220] x25: ffffffc96f793280 x24: ffffffa50e1352d0 [ 15.341695] x23: ffffffa50e14bbfc x22: ffffffc94e16f560 [ 15.347172] x21: ffffffa50bd93704 x20: ffffffa50ca06208 [ 15.352648] x19: 00000000fffffffe x18: 0000000000000020 [ 15.358124] x17: ffffffa50d8f4000 x16: 000000000000003a [ 15.363602] x15: ffffffa50b4cf150 x14: 0000000000003337 [ 15.369080] x13: 0000000000000004 x12: 000000001167dd56 [ 15.374556] x11: 0000000000000015 x10: 000000000682aaab [ 15.380032] x9 : 450514ed24766500 x8 : 450514ed24766500 [ 15.385509] x7 : ffffffa509d82700 x6 : 0000000000000000 [ 15.390987] x5 : 0000000000000080 x4 : 0000000000000001 [ 15.396465] x3 : ffffff800805b598 x2 : ffffffa509c97b48 [ 15.401943] x1 : ffffffa509d82874 x0 : 0000000000000000 [ 15.407420] Call trace: [ 15.409959] gpio_to_desc+0xac/0xc0 [ 15.413564] msm_pcie_probe+0x4d7c/0x5418 [ 15.417708] platform_drv_probe+0x80/0xb8 [ 15.421852] really_probe+0x4e0/0x6b0 [ 15.425634] driver_probe_device+0x74/0x148 [ 15.429957] __driver_attach+0x120/0x1d8 [ 15.434012] bus_for_each_dev+0x84/0xd0 [ 15.437978] driver_attach+0x2c/0x38 [ 15.441670] bus_add_driver+0x144/0x268 [ 15.445637] driver_register+0x78/0x110 [ 15.449603] __platform_driver_register+0x4c/0x58 [ 15.454450] pcie_init+0x7b8/0x804 [ 15.457966] do_one_initcall+0x1ac/0x3c8 [ 15.462020] kernel_init_freeable+0x470/0x53c [ 15.466520] kernel_init+0x18/0x298 [ 15.470123] ret_from_fork+0x10/0x1c [ 15.473816] irq event stamp: 1096276 [ 15.477509] hardirqs last enabled at (1096275): [] console_unlock+0x4bc/0x568 [ 15.486551] hardirqs last disabled at (1096276): [] do_debug_exception+0x84/0x150 [ 15.495857] softirqs last enabled at (1096272): [] __do_softirq+0x50c/0x554 [ 15.504713] softirqs last disabled at (1096263): [] irq_exit+0xfc/0x120 [ 15.513124] ---[ end trace 1d70a345b84a86f4 ]--- [ 15.924404] msm_pcie_enable: PCIe: Assert the reset of endpoint of RC1. [ 15.935103] msm_pcie_enable: PCIe: RC1: PCIE20_PARF_INT_ALL_MASK: 0x7f80d202 [ 15.944633] pcie_phy_init: PCIe RC1 PHY is ready! [ 15.959549] msm_pcie_enable: PCIe: Release the reset of endpoint of RC1. [ 15.993339] msm_pcie_link_train: PCIe RC1 link initialized [ 16.000064] pci-msm 1c08000.qcom,pcie: host bridge /soc/qcom,pcie@1c08000 ranges: [ 16.007917] pci-msm 1c08000.qcom,pcie: No bus range found for /soc/qcom,pcie@1c08000, using [bus 00-ff] [ 16.018060] pci-msm 1c08000.qcom,pcie: IO 0x40200000..0x402fffff -> 0x40200000 [ 16.026247] pci-msm 1c08000.qcom,pcie: MEM 0x40300000..0x5fffffff -> 0x40300000 [ 16.035909] pci-msm 1c08000.qcom,pcie: PCI host bridge to bus 0001:00 [ 16.042620] pci_bus 0001:00: root bus resource [bus 00-ff] [ 16.048329] pci_bus 0001:00: root bus resource [io 0x0000-0xfffff] (bus address [0x40200000-0x402fffff]) [ 16.058212] pci_bus 0001:00: root bus resource [mem 0x40300000-0x5fffffff] [ 16.065434] pci 0001:00:00.0: [17cb:010b] type 01 class 0x060400 [ 16.065555] pci 0001:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] [ 16.065808] pci 0001:00:00.0: PME# supported from D0 D3hot D3cold [ 16.082587] pci 0001:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 16.091738] pci 0001:01:00.0: [1055:7431] type 00 class 0x020000 [ 16.091994] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit] [ 16.092100] pci 0001:01:00.0: reg 0x18: [mem 0x00000000-0x000000ff 64bit] [ 16.092209] pci 0001:01:00.0: reg 0x20: [mem 0x00000000-0x000000ff 64bit] [ 16.092765] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold [ 16.105626] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01 [ 16.105829] pci 0001:00:00.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000 [ 16.105845] pci 0001:00:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000 [ 16.105854] pci 0001:00:00.0: bridge window [mem 0x00100000-0x001fffff] to [bus 01] add_size 200000 add_align 100000 [ 16.105900] pci 0001:00:00.0: BAR 8: assigned [mem 0x40300000-0x405fffff] [ 16.112999] pci 0001:00:00.0: BAR 9: assigned [mem 0x40600000-0x407fffff 64bit pref] [ 16.120994] pci 0001:00:00.0: BAR 0: assigned [mem 0x40800000-0x40800fff 64bit] [ 16.128743] pci 0001:00:00.0: BAR 7: assigned [io 0x1000-0x1fff] [ 16.135096] pci 0001:01:00.0: BAR 0: assigned [mem 0x40300000-0x40301fff 64bit] [ 16.142722] pci 0001:01:00.0: BAR 2: assigned [mem 0x40302000-0x403020ff 64bit] [ 16.150364] pci 0001:01:00.0: BAR 4: assigned [mem 0x40302100-0x403021ff 64bit] [ 16.157989] pci 0001:00:00.0: PCI bridge to [bus 01] [ 16.163133] pci 0001:00:00.0: bridge window [io 0x1000-0x1fff] [ 16.169469] pci 0001:00:00.0: bridge window [mem 0x40300000-0x405fffff] [ 16.176489] pci 0001:00:00.0: bridge window [mem 0x40600000-0x407fffff 64bit pref] [ 16.185145] pci-msm-rc 0001:00:00.0: Linked as a consumer to 15000000.apps-smmu [ 16.194819] iommu: Adding device 0001:00:00.0 to group 4 [ 16.201570] msm_pcie_probe: RC1 is enabled in bootup [ 16.207648] register_client_adhoc:find path.src 108 dest 512 [ 16.208995] register_client_adhoc:Client handle 15 pcie2 [ 16.215564] pci-msm 1c10000.qcom,pcie: 1c10000.qcom,pcie supply vreg-3p3 not found, using dummy regulator [ 16.231250] pci-msm 1c10000.qcom,pcie: Linked as a consumer to regulator.0 [ 16.238548] pci-msm 1c10000.qcom,pcie: Linked as a consumer to regulator.18 [ 16.245921] pci-msm 1c10000.qcom,pcie: Linked as a consumer to regulator.13 [ 16.253323] pci-msm 1c10000.qcom,pcie: Linked as a consumer to regulator.4 [ 16.260669] pci-msm 1c10000.qcom,pcie: Linked as a consumer to regulator.61 [ 16.268716] msm_pcie_get_reg: PCIe: RC2: no tcsr resource found. [ 16.274924] msm_pcie_get_reg: PCIe: RC2: no rumi resource found. [ 16.281138] msm_pcie_probe: PCIe: RC2 could not get pinctrl sleep state1 [ 16.288525] genirq: irq_chip msmgpio did not update eff. affinity mask of irq 387 [ 16.296438] ------------[ cut here ]------------ [ 16.301212] invalid GPIO -2 [ 16.304158] WARNING: CPU: 7 PID: 1 at drivers/gpio/gpiolib.c:123 gpio_to_desc+0xac/0xc0 [ 16.312396] Modules linked in: [ 16.315564] CPU: 7 PID: 1 Comm: swapper/0 Tainted: G S W 4.19.157+ #1 [ 16.323353] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 16.330793] pstate: 60800005 (nZCv daif -PAN +UAO) [ 16.335731] pc : gpio_to_desc+0xac/0xc0 [ 16.339694] lr : gpio_to_desc+0xa8/0xc0 [ 16.343656] sp : ffffff800805b950 [ 16.347091] x29: ffffff800805b950 x28: ffffffa50e1615d0 [ 16.352574] x27: ffffffc97f1e4538 x26: ffffffa50e161d7c [ 16.358057] x25: ffffffc96f795a80 x24: ffffffa50e1352d0 [ 16.363539] x23: ffffffa50e161d7c x22: ffffffc94e16a960 [ 16.369021] x21: ffffffa50bd0deb7 x20: ffffffa50ca06208 [ 16.374504] x19: 00000000fffffffe x18: 0000000000000020 [ 16.379986] x17: ffffffa50d8f4000 x16: 000000000000003a [ 16.385468] x15: ffffffa50b4cf150 x14: 0000000000003132 [ 16.390951] x13: 0000000000000004 x12: 00000000129334c5 [ 16.396433] x11: 0000000000000015 x10: 000000000682aaab [ 16.401916] x9 : 450514ed24766500 x8 : 450514ed24766500 [ 16.407398] x7 : ffffffa509d82700 x6 : 0000000000000000 [ 16.412880] x5 : 0000000000000080 x4 : 0000000000000001 [ 16.418362] x3 : ffffff800805b578 x2 : ffffffa509c97b48 [ 16.423845] x1 : ffffffa509d82874 x0 : 0000000000000000 [ 16.429331] Call trace: [ 16.431872] gpio_to_desc+0xac/0xc0 [ 16.435487] gpio_request+0x20/0x48 [ 16.439104] msm_pcie_probe+0x4ca8/0x5418 [ 16.443251] platform_drv_probe+0x80/0xb8 [ 16.447395] really_probe+0x4e0/0x6b0 [ 16.451188] driver_probe_device+0x74/0x148 [ 16.455508] __driver_attach+0x120/0x1d8 [ 16.459562] bus_for_each_dev+0x84/0xd0 [ 16.463525] driver_attach+0x2c/0x38 [ 16.467227] bus_add_driver+0x144/0x268 [ 16.471190] driver_register+0x78/0x110 [ 16.475152] __platform_driver_register+0x4c/0x58 [ 16.480010] pcie_init+0x7b8/0x804 [ 16.483541] do_one_initcall+0x1ac/0x3c8 [ 16.487596] kernel_init_freeable+0x470/0x53c [ 16.492102] kernel_init+0x18/0x298 [ 16.495716] ret_from_fork+0x10/0x1c [ 16.499418] irq event stamp: 1109412 [ 16.503125] hardirqs last enabled at (1109411): [] console_unlock+0x4bc/0x568 [ 16.512164] hardirqs last disabled at (1109412): [] do_debug_exception+0x84/0x150 [ 16.521472] softirqs last enabled at (1109400): [] __do_softirq+0x50c/0x554 [ 16.530328] softirqs last disabled at (1109391): [] irq_exit+0xfc/0x120 [ 16.538736] ---[ end trace 1d70a345b84a86f5 ]--- [ 16.543573] Can request power-phy-gpio\x0a! [ 16.543576] ------------[ cut here ]------------ [ 16.553854] invalid GPIO -2 [ 16.556767] WARNING: CPU: 7 PID: 1 at drivers/gpio/gpiolib.c:123 gpio_to_desc+0xac/0xc0 [ 16.565004] Modules linked in: [ 16.568164] CPU: 7 PID: 1 Comm: swapper/0 Tainted: G S W 4.19.157+ #1 [ 16.575952] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 16.583391] pstate: 60800005 (nZCv daif -PAN +UAO) [ 16.588329] pc : gpio_to_desc+0xac/0xc0 [ 16.592291] lr : gpio_to_desc+0xa8/0xc0 [ 16.596253] sp : ffffff800805b970 [ 16.599686] x29: ffffff800805b970 x28: ffffffa50e1615d0 [ 16.605169] x27: ffffffc97f1e4538 x26: ffffffa50e161d7c [ 16.610651] x25: ffffffc96f795a80 x24: ffffffa50e1352d0 [ 16.616134] x23: ffffffa50e161d7c x22: ffffffc94e16a960 [ 16.621616] x21: ffffffa50bd0deb7 x20: ffffffa50ca06208 [ 16.627099] x19: 00000000fffffffe x18: 0000000000000020 [ 16.632581] x17: ffffffa50d8f4000 x16: 000000000000003a [ 16.638063] x15: ffffffa50b4cf150 x14: 0000000000003534 [ 16.643546] x13: 0000000000000004 x12: 0000000012dd39b6 [ 16.649028] x11: 0000000000000015 x10: 000000000682aaab [ 16.654510] x9 : 450514ed24766500 x8 : 450514ed24766500 [ 16.659993] x7 : ffffffa509d82700 x6 : 0000000000000000 [ 16.665475] x5 : 0000000000000080 x4 : 0000000000000001 [ 16.670957] x3 : ffffff800805b598 x2 : ffffffa509c97b48 [ 16.676440] x1 : ffffffa509d82874 x0 : 0000000000000000 [ 16.681922] Call trace: [ 16.684463] gpio_to_desc+0xac/0xc0 [ 16.688075] msm_pcie_probe+0x4cdc/0x5418 [ 16.692217] platform_drv_probe+0x80/0xb8 [ 16.696359] really_probe+0x4e0/0x6b0 [ 16.700150] driver_probe_device+0x74/0x148 [ 16.704470] __driver_attach+0x120/0x1d8 [ 16.708522] bus_for_each_dev+0x84/0xd0 [ 16.712485] driver_attach+0x2c/0x38 [ 16.716187] bus_add_driver+0x144/0x268 [ 16.720150] driver_register+0x78/0x110 [ 16.724113] __platform_driver_register+0x4c/0x58 [ 16.728962] pcie_init+0x7b8/0x804 [ 16.732485] do_one_initcall+0x1ac/0x3c8 [ 16.736537] kernel_init_freeable+0x470/0x53c [ 16.741035] kernel_init+0x18/0x298 [ 16.744648] ret_from_fork+0x10/0x1c [ 16.748350] irq event stamp: 1109492 [ 16.752052] hardirqs last enabled at (1109491): [] console_unlock+0x4bc/0x568 [ 16.761091] hardirqs last disabled at (1109492): [] do_debug_exception+0x84/0x150 [ 16.770398] softirqs last enabled at (1109488): [] __do_softirq+0x50c/0x554 [ 16.779251] softirqs last disabled at (1109479): [] irq_exit+0xfc/0x120 [ 16.787658] ---[ end trace 1d70a345b84a86f6 ]--- [ 16.792551] Set power-phy-gpio success\x0a! [ 16.792585] ------------[ cut here ]------------ [ 16.802849] invalid GPIO -2 [ 16.805758] WARNING: CPU: 7 PID: 1 at drivers/gpio/gpiolib.c:123 gpio_to_desc+0xac/0xc0 [ 16.813994] Modules linked in: [ 16.817154] CPU: 7 PID: 1 Comm: swapper/0 Tainted: G S W 4.19.157+ #1 [ 16.824942] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 16.832381] pstate: 60800005 (nZCv daif -PAN +UAO) [ 16.837319] pc : gpio_to_desc+0xac/0xc0 [ 16.841281] lr : gpio_to_desc+0xa8/0xc0 [ 16.845243] sp : ffffff800805b950 [ 16.848676] x29: ffffff800805b950 x28: ffffffa50e1615d0 [ 16.854159] x27: ffffffc97f1e4538 x26: ffffffa50e161d7c [ 16.859641] x25: ffffffc96f795a80 x24: ffffffa50e1352d0 [ 16.865123] x23: ffffffa50e161d7c x22: ffffffc94e16a960 [ 16.870606] x21: ffffffa50bd0df45 x20: ffffffa50ca06208 [ 16.876088] x19: 00000000fffffffe x18: 0000000000000020 [ 16.881570] x17: ffffffa50d8f4000 x16: 000000000000003a [ 16.887053] x15: ffffffa50b4cf150 x14: 0000000000003439 [ 16.892535] x13: 0000000000000004 x12: 0000000013262c5c [ 16.898017] x11: 0000000000000015 x10: 000000000682aaab [ 16.903499] x9 : 450514ed24766500 x8 : 450514ed24766500 [ 16.908982] x7 : ffffffa509d82700 x6 : 0000000000000000 [ 16.914464] x5 : 0000000000000080 x4 : 0000000000000001 [ 16.919946] x3 : ffffff800805b578 x2 : ffffffa509c97b48 [ 16.925429] x1 : ffffffa509d82874 x0 : 0000000000000000 [ 16.930912] Call trace: [ 16.933453] gpio_to_desc+0xac/0xc0 [ 16.937066] gpio_request+0x20/0x48 [ 16.940679] msm_pcie_probe+0x4d2c/0x5418 [ 16.944820] platform_drv_probe+0x80/0xb8 [ 16.948962] really_probe+0x4e0/0x6b0 [ 16.952753] driver_probe_device+0x74/0x148 [ 16.957074] __driver_attach+0x120/0x1d8 [ 16.961126] bus_for_each_dev+0x84/0xd0 [ 16.965088] driver_attach+0x2c/0x38 [ 16.968790] bus_add_driver+0x144/0x268 [ 16.972753] driver_register+0x78/0x110 [ 16.976716] __platform_driver_register+0x4c/0x58 [ 16.981564] pcie_init+0x7b8/0x804 [ 16.985087] do_one_initcall+0x1ac/0x3c8 [ 16.989139] kernel_init_freeable+0x470/0x53c [ 16.993637] kernel_init+0x18/0x298 [ 16.997250] ret_from_fork+0x10/0x1c [ 17.000952] irq event stamp: 1109606 [ 17.004654] hardirqs last enabled at (1109605): [] console_unlock+0x4bc/0x568 [ 17.013693] hardirqs last disabled at (1109606): [] do_debug_exception+0x84/0x150 [ 17.023000] softirqs last enabled at (1109602): [] __do_softirq+0x50c/0x554 [ 17.031853] softirqs last disabled at (1109593): [] irq_exit+0xfc/0x120 [ 17.040260] ---[ end trace 1d70a345b84a86f7 ]--- [ 17.045104] ------------[ cut here ]------------ [ 17.049892] invalid GPIO -2 [ 17.052803] WARNING: CPU: 7 PID: 1 at drivers/gpio/gpiolib.c:123 gpio_to_desc+0xac/0xc0 [ 17.061039] Modules linked in: [ 17.064199] CPU: 7 PID: 1 Comm: swapper/0 Tainted: G S W 4.19.157+ #1 [ 17.071987] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 17.079425] pstate: 60800005 (nZCv daif -PAN +UAO) [ 17.084363] pc : gpio_to_desc+0xac/0xc0 [ 17.088326] lr : gpio_to_desc+0xa8/0xc0 [ 17.092288] sp : ffffff800805b970 [ 17.095721] x29: ffffff800805b970 x28: ffffffa50e1615d0 [ 17.101203] x27: ffffffc97f1e4538 x26: ffffffa50e161d7c [ 17.106686] x25: ffffffc96f795a80 x24: ffffffa50e1352d0 [ 17.112168] x23: ffffffa50e161d7c x22: ffffffc94e16a960 [ 17.117650] x21: ffffffa50bd0df45 x20: ffffffa50ca06208 [ 17.123133] x19: 00000000fffffffe x18: 0000000000000020 [ 17.128615] x17: ffffffa50d8f4000 x16: 000000000000003a [ 17.134097] x15: ffffffa50b4cf150 x14: 0000000000003932 [ 17.139580] x13: 0000000000000004 x12: 00000000136e8cb2 [ 17.145062] x11: 0000000000000015 x10: 000000000682aaab [ 17.150544] x9 : 450514ed24766500 x8 : 450514ed24766500 [ 17.156027] x7 : ffffffa509d82700 x6 : 0000000000000000 [ 17.161509] x5 : 0000000000000080 x4 : 0000000000000001 [ 17.166991] x3 : ffffff800805b598 x2 : ffffffa509c97b48 [ 17.172474] x1 : ffffffa509d82874 x0 : 0000000000000000 [ 17.177956] Call trace: [ 17.180497] gpio_to_desc+0xac/0xc0 [ 17.184109] msm_pcie_probe+0x4d38/0x5418 [ 17.188251] platform_drv_probe+0x80/0xb8 [ 17.192393] really_probe+0x4e0/0x6b0 [ 17.196185] driver_probe_device+0x74/0x148 [ 17.200505] __driver_attach+0x120/0x1d8 [ 17.204557] bus_for_each_dev+0x84/0xd0 [ 17.208520] driver_attach+0x2c/0x38 [ 17.212222] bus_add_driver+0x144/0x268 [ 17.216184] driver_register+0x78/0x110 [ 17.220147] __platform_driver_register+0x4c/0x58 [ 17.224995] pcie_init+0x7b8/0x804 [ 17.228518] do_one_initcall+0x1ac/0x3c8 [ 17.232570] kernel_init_freeable+0x470/0x53c [ 17.237069] kernel_init+0x18/0x298 [ 17.240681] ret_from_fork+0x10/0x1c [ 17.244383] irq event stamp: 1109670 [ 17.248085] hardirqs last enabled at (1109669): [] console_unlock+0x4bc/0x568 [ 17.257124] hardirqs last disabled at (1109670): [] do_debug_exception+0x84/0x150 [ 17.266431] softirqs last enabled at (1109666): [] __do_softirq+0x50c/0x554 [ 17.275285] softirqs last disabled at (1109657): [] irq_exit+0xfc/0x120 [ 17.283691] ---[ end trace 1d70a345b84a86f8 ]--- [ 17.288544] ------------[ cut here ]------------ [ 17.293316] invalid GPIO -2 [ 17.296214] WARNING: CPU: 7 PID: 1 at drivers/gpio/gpiolib.c:123 gpio_to_desc+0xac/0xc0 [ 17.304449] Modules linked in: [ 17.307609] CPU: 7 PID: 1 Comm: swapper/0 Tainted: G S W 4.19.157+ #1 [ 17.315397] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 17.322836] pstate: 60800005 (nZCv daif -PAN +UAO) [ 17.327774] pc : gpio_to_desc+0xac/0xc0 [ 17.331736] lr : gpio_to_desc+0xa8/0xc0 [ 17.335698] sp : ffffff800805b950 [ 17.339131] x29: ffffff800805b950 x28: ffffffa50e1615d0 [ 17.344613] x27: ffffffc97f1e4538 x26: ffffffa50e161d7c [ 17.350096] x25: ffffffc96f795a80 x24: ffffffa50e1352d0 [ 17.355578] x23: ffffffa50e161d7c x22: ffffffc94e16a960 [ 17.361060] x21: ffffffa50bd93704 x20: ffffffa50ca06208 [ 17.366543] x19: 00000000fffffffe x18: 0000000000000020 [ 17.372025] x17: ffffffa50d8f4000 x16: 000000000000003a [ 17.377507] x15: ffffffa50b4cf150 x14: 0000000000003136 [ 17.382990] x13: 0000000000000004 x12: 0000000013b5dca1 [ 17.388472] x11: 0000000000000015 x10: 000000000682aaab [ 17.393954] x9 : 450514ed24766500 x8 : 450514ed24766500 [ 17.399436] x7 : ffffffa509d82700 x6 : 0000000000000000 [ 17.404919] x5 : 0000000000000080 x4 : 0000000000000001 [ 17.410401] x3 : ffffff800805b578 x2 : ffffffa509c97b48 [ 17.415883] x1 : ffffffa509d82874 x0 : 0000000000000000 [ 17.421366] Call trace: [ 17.423906] gpio_to_desc+0xac/0xc0 [ 17.427519] gpio_request+0x20/0x48 [ 17.431132] msm_pcie_probe+0x4d70/0x5418 [ 17.435273] platform_drv_probe+0x80/0xb8 [ 17.439414] really_probe+0x4e0/0x6b0 [ 17.443205] driver_probe_device+0x74/0x148 [ 17.447526] __driver_attach+0x120/0x1d8 [ 17.451578] bus_for_each_dev+0x84/0xd0 [ 17.455540] driver_attach+0x2c/0x38 [ 17.459242] bus_add_driver+0x144/0x268 [ 17.463205] driver_register+0x78/0x110 [ 17.467168] __platform_driver_register+0x4c/0x58 [ 17.472016] pcie_init+0x7b8/0x804 [ 17.475540] do_one_initcall+0x1ac/0x3c8 [ 17.479591] kernel_init_freeable+0x470/0x53c [ 17.484090] kernel_init+0x18/0x298 [ 17.487702] ret_from_fork+0x10/0x1c [ 17.491404] irq event stamp: 1109754 [ 17.495105] hardirqs last enabled at (1109753): [] console_unlock+0x4bc/0x568 [ 17.504145] hardirqs last disabled at (1109754): [] do_debug_exception+0x84/0x150 [ 17.513452] softirqs last enabled at (1109742): [] __do_softirq+0x50c/0x554 [ 17.522305] softirqs last disabled at (1109733): [] irq_exit+0xfc/0x120 [ 17.530712] ---[ end trace 1d70a345b84a86f9 ]--- [ 17.535537] ------------[ cut here ]------------ [ 17.540309] invalid GPIO -2 [ 17.543205] WARNING: CPU: 7 PID: 1 at drivers/gpio/gpiolib.c:123 gpio_to_desc+0xac/0xc0 [ 17.551440] Modules linked in: [ 17.554600] CPU: 7 PID: 1 Comm: swapper/0 Tainted: G S W 4.19.157+ #1 [ 17.562388] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 17.569827] pstate: 60800005 (nZCv daif -PAN +UAO) [ 17.574764] pc : gpio_to_desc+0xac/0xc0 [ 17.578727] lr : gpio_to_desc+0xa8/0xc0 [ 17.582689] sp : ffffff800805b970 [ 17.586122] x29: ffffff800805b970 x28: ffffffa50e1615d0 [ 17.591604] x27: ffffffc97f1e4538 x26: ffffffa50e161d7c [ 17.597087] x25: ffffffc96f795a80 x24: ffffffa50e1352d0 [ 17.602569] x23: ffffffa50e161d7c x22: ffffffc94e16a960 [ 17.608051] x21: ffffffa50bd93704 x20: ffffffa50ca06208 [ 17.613533] x19: 00000000fffffffe x18: 0000000000000020 [ 17.619016] x17: ffffffa50d8f4000 x16: 000000000000003a [ 17.624498] x15: ffffffa50b4cf150 x14: 0000000000003039 [ 17.629980] x13: 0000000000000004 x12: 0000000013fe390f [ 17.635463] x11: 0000000000000015 x10: 000000000682aaab [ 17.640945] x9 : 450514ed24766500 x8 : 450514ed24766500 [ 17.646427] x7 : ffffffa509d82700 x6 : 0000000000000000 [ 17.651910] x5 : 0000000000000080 x4 : 0000000000000001 [ 17.657392] x3 : ffffff800805b598 x2 : ffffffa509c97b48 [ 17.662874] x1 : ffffffa509d82874 x0 : 0000000000000000 [ 17.668356] Call trace: [ 17.670898] gpio_to_desc+0xac/0xc0 [ 17.674510] msm_pcie_probe+0x4d7c/0x5418 [ 17.678651] platform_drv_probe+0x80/0xb8 [ 17.682793] really_probe+0x4e0/0x6b0 [ 17.686584] driver_probe_device+0x74/0x148 [ 17.690904] __driver_attach+0x120/0x1d8 [ 17.694956] bus_for_each_dev+0x84/0xd0 [ 17.698919] driver_attach+0x2c/0x38 [ 17.702621] bus_add_driver+0x144/0x268 [ 17.706584] driver_register+0x78/0x110 [ 17.710546] __platform_driver_register+0x4c/0x58 [ 17.715395] pcie_init+0x7b8/0x804 [ 17.718918] do_one_initcall+0x1ac/0x3c8 [ 17.722969] kernel_init_freeable+0x470/0x53c [ 17.727468] kernel_init+0x18/0x298 [ 17.731080] ret_from_fork+0x10/0x1c [ 17.734782] irq event stamp: 1109806 [ 17.738484] hardirqs last enabled at (1109805): [] console_unlock+0x4bc/0x568 [ 17.747523] hardirqs last disabled at (1109806): [] do_debug_exception+0x84/0x150 [ 17.756830] softirqs last enabled at (1109794): [] __do_softirq+0x50c/0x554 [ 17.765684] softirqs last disabled at (1109785): [] irq_exit+0xfc/0x120 [ 17.774090] ---[ end trace 1d70a345b84a86fa ]--- [ 17.778966] ------------[ cut here ]------------ [ 17.783740] invalid GPIO -2 [ 17.786648] WARNING: CPU: 7 PID: 1 at drivers/gpio/gpiolib.c:123 gpio_to_desc+0xac/0xc0 [ 17.794884] Modules linked in: [ 17.798043] CPU: 7 PID: 1 Comm: swapper/0 Tainted: G S W 4.19.157+ #1 [ 17.805832] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 17.813270] pstate: 60800005 (nZCv daif -PAN +UAO) [ 17.818208] pc : gpio_to_desc+0xac/0xc0 [ 17.822170] lr : gpio_to_desc+0xa8/0xc0 [ 17.826132] sp : ffffff800805b950 [ 17.829565] x29: ffffff800805b950 x28: ffffffa50e1615d0 [ 17.835048] x27: ffffffc97f1e4538 x26: ffffffa50e161d7c [ 17.840530] x25: ffffffc96f795a80 x24: ffffffa50e1352d0 [ 17.846012] x23: ffffffa50e161d7c x22: ffffffc94e16a960 [ 17.851495] x21: ffffffa50bd0dfd0 x20: ffffffa50ca06208 [ 17.856977] x19: 00000000fffffffe x18: 0000000000000020 [ 17.862459] x17: ffffffa50d8f4000 x16: 000000000000003a [ 17.867942] x15: ffffffa50b4cf150 x14: 0000000000003430 [ 17.873424] x13: 0000000000000004 x12: 0000000014458b37 [ 17.878906] x11: 0000000000000015 x10: 000000000682aaab [ 17.884389] x9 : 450514ed24766500 x8 : 450514ed24766500 [ 17.889871] x7 : ffffffa509d82700 x6 : 0000000000000000 [ 17.895353] x5 : 0000000000000080 x4 : 0000000000000001 [ 17.900835] x3 : ffffff800805b578 x2 : ffffffa509c97b48 [ 17.906318] x1 : ffffffa509d82874 x0 : 0000000000000000 [ 17.911800] Call trace: [ 17.914341] gpio_to_desc+0xac/0xc0 [ 17.917953] gpio_request+0x20/0x48 [ 17.921566] msm_pcie_probe+0x4db4/0x5418 [ 17.925707] platform_drv_probe+0x80/0xb8 [ 17.929848] really_probe+0x4e0/0x6b0 [ 17.933639] driver_probe_device+0x74/0x148 [ 17.937960] __driver_attach+0x120/0x1d8 [ 17.942012] bus_for_each_dev+0x84/0xd0 [ 17.945974] driver_attach+0x2c/0x38 [ 17.949676] bus_add_driver+0x144/0x268 [ 17.953639] driver_register+0x78/0x110 [ 17.957601] __platform_driver_register+0x4c/0x58 [ 17.962450] pcie_init+0x7b8/0x804 [ 17.965973] do_one_initcall+0x1ac/0x3c8 [ 17.970024] kernel_init_freeable+0x470/0x53c [ 17.974523] kernel_init+0x18/0x298 [ 17.978135] ret_from_fork+0x10/0x1c [ 17.981837] irq event stamp: 1109902 [ 17.985538] hardirqs last enabled at (1109901): [] console_unlock+0x4bc/0x568 [ 17.994578] hardirqs last disabled at (1109902): [] do_debug_exception+0x84/0x150 [ 18.003885] softirqs last enabled at (1109898): [] __do_softirq+0x50c/0x554 [ 18.012739] softirqs last disabled at (1109889): [] irq_exit+0xfc/0x120 [ 18.021145] ---[ end trace 1d70a345b84a86fb ]--- [ 18.025968] ------------[ cut here ]------------ [ 18.030754] invalid GPIO -2 [ 18.033661] WARNING: CPU: 7 PID: 1 at drivers/gpio/gpiolib.c:123 gpio_to_desc+0xac/0xc0 [ 18.041898] Modules linked in: [ 18.045058] CPU: 7 PID: 1 Comm: swapper/0 Tainted: G S W 4.19.157+ #1 [ 18.052846] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 18.060284] pstate: 60800005 (nZCv daif -PAN +UAO) [ 18.065222] pc : gpio_to_desc+0xac/0xc0 [ 18.069184] lr : gpio_to_desc+0xa8/0xc0 [ 18.073146] sp : ffffff800805b970 [ 18.076580] x29: ffffff800805b970 x28: ffffffa50e1615d0 [ 18.082062] x27: ffffffc97f1e4538 x26: ffffffa50e161d7c [ 18.087544] x25: ffffffc96f795a80 x24: ffffffa50e1352d0 [ 18.093026] x23: ffffffa50e161d7c x22: ffffffc94e16a960 [ 18.098509] x21: ffffffa50bd0dfd0 x20: ffffffa50ca06208 [ 18.103991] x19: 00000000fffffffe x18: 0000000000000020 [ 18.109473] x17: ffffffa50d8f4000 x16: 000000000000003a [ 18.114955] x15: ffffffa50b4cf150 x14: 0000000000003534 [ 18.120438] x13: 0000000000000004 x12: 00000000148de944 [ 18.125920] x11: 0000000000000015 x10: 000000000682aaab [ 18.131402] x9 : 450514ed24766500 x8 : 450514ed24766500 [ 18.136885] x7 : ffffffa509d82700 x6 : 0000000000000000 [ 18.142367] x5 : 0000000000000080 x4 : 0000000000000001 [ 18.147849] x3 : ffffff800805b598 x2 : ffffffa509c97b48 [ 18.153332] x1 : ffffffa509d82874 x0 : 0000000000000000 [ 18.158814] Call trace: [ 18.161354] gpio_to_desc+0xac/0xc0 [ 18.164967] msm_pcie_probe+0x4dc0/0x5418 [ 18.169108] platform_drv_probe+0x80/0xb8 [ 18.173249] really_probe+0x4e0/0x6b0 [ 18.177040] driver_probe_device+0x74/0x148 [ 18.181361] __driver_attach+0x120/0x1d8 [ 18.185413] bus_for_each_dev+0x84/0xd0 [ 18.189375] driver_attach+0x2c/0x38 [ 18.193077] bus_add_driver+0x144/0x268 [ 18.197040] driver_register+0x78/0x110 [ 18.201002] __platform_driver_register+0x4c/0x58 [ 18.205851] pcie_init+0x7b8/0x804 [ 18.209374] do_one_initcall+0x1ac/0x3c8 [ 18.213425] kernel_init_freeable+0x470/0x53c [ 18.217924] kernel_init+0x18/0x298 [ 18.221536] ret_from_fork+0x10/0x1c [ 18.225237] irq event stamp: 1109966 [ 18.228939] hardirqs last enabled at (1109965): [] console_unlock+0x4bc/0x568 [ 18.237979] hardirqs last disabled at (1109966): [] do_debug_exception+0x84/0x150 [ 18.247286] softirqs last enabled at (1109962): [] __do_softirq+0x50c/0x554 [ 18.256140] softirqs last disabled at (1109953): [] irq_exit+0xfc/0x120 [ 18.264546] ---[ end trace 1d70a345b84a86fc ]--- [ 18.269419] ------------[ cut here ]------------ [ 18.274191] invalid GPIO -2 [ 18.277098] WARNING: CPU: 7 PID: 1 at drivers/gpio/gpiolib.c:123 gpio_to_desc+0xac/0xc0 [ 18.285334] Modules linked in: [ 18.288494] CPU: 7 PID: 1 Comm: swapper/0 Tainted: G S W 4.19.157+ #1 [ 18.296282] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 18.303721] pstate: 60800005 (nZCv daif -PAN +UAO) [ 18.308658] pc : gpio_to_desc+0xac/0xc0 [ 18.312621] lr : gpio_to_desc+0xa8/0xc0 [ 18.316583] sp : ffffff800805b950 [ 18.320016] x29: ffffff800805b950 x28: ffffffa50e1615d0 [ 18.325498] x27: ffffffc97f1e4538 x26: ffffffa50e161d7c [ 18.330981] x25: ffffffc96f795a80 x24: ffffffa50e1352d0 [ 18.336463] x23: ffffffa50e161d7c x22: ffffffc94e16a960 [ 18.341945] x21: ffffffa50bd0e017 x20: ffffffa50ca06208 [ 18.347428] x19: 00000000fffffffe x18: 0000000000000020 [ 18.352910] x17: ffffffa50d8f4000 x16: 000000000000003a [ 18.358392] x15: ffffffa50b4cf150 x14: 0000000000003931 [ 18.363874] x13: 0000000000000004 x12: 0000000014d53b09 [ 18.369357] x11: 0000000000000015 x10: 000000000682aaab [ 18.374839] x9 : 450514ed24766500 x8 : 450514ed24766500 [ 18.380321] x7 : ffffffa509d82700 x6 : 0000000000000000 [ 18.385804] x5 : 0000000000000080 x4 : 0000000000000001 [ 18.391286] x3 : ffffff800805b578 x2 : ffffffa509c97b48 [ 18.396768] x1 : ffffffa509d82874 x0 : 0000000000000000 [ 18.402250] Call trace: [ 18.404791] gpio_to_desc+0xac/0xc0 [ 18.408404] gpio_request+0x20/0x48 [ 18.412017] msm_pcie_probe+0x4df8/0x5418 [ 18.416158] platform_drv_probe+0x80/0xb8 [ 18.420299] really_probe+0x4e0/0x6b0 [ 18.424090] driver_probe_device+0x74/0x148 [ 18.428411] __driver_attach+0x120/0x1d8 [ 18.432463] bus_for_each_dev+0x84/0xd0 [ 18.436425] driver_attach+0x2c/0x38 [ 18.440128] bus_add_driver+0x144/0x268 [ 18.444090] driver_register+0x78/0x110 [ 18.448053] __platform_driver_register+0x4c/0x58 [ 18.452901] pcie_init+0x7b8/0x804 [ 18.456424] do_one_initcall+0x1ac/0x3c8 [ 18.460476] kernel_init_freeable+0x470/0x53c [ 18.464974] kernel_init+0x18/0x298 [ 18.468587] ret_from_fork+0x10/0x1c [ 18.472288] irq event stamp: 1110064 [ 18.475990] hardirqs last enabled at (1110063): [] console_unlock+0x4bc/0x568 [ 18.485029] hardirqs last disabled at (1110064): [] do_debug_exception+0x84/0x150 [ 18.494336] softirqs last enabled at (1110060): [] __do_softirq+0x50c/0x554 [ 18.503189] softirqs last disabled at (1110051): [] irq_exit+0xfc/0x120 [ 18.511596] ---[ end trace 1d70a345b84a86fd ]--- [ 18.516415] ------------[ cut here ]------------ [ 18.521187] invalid GPIO -2 [ 18.524083] WARNING: CPU: 7 PID: 1 at drivers/gpio/gpiolib.c:123 gpio_to_desc+0xac/0xc0 [ 18.532318] Modules linked in: [ 18.535478] CPU: 7 PID: 1 Comm: swapper/0 Tainted: G S W 4.19.157+ #1 [ 18.543266] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 18.550704] pstate: 60800005 (nZCv daif -PAN +UAO) [ 18.555642] pc : gpio_to_desc+0xac/0xc0 [ 18.559605] lr : gpio_to_desc+0xa8/0xc0 [ 18.563566] sp : ffffff800805b970 [ 18.567000] x29: ffffff800805b970 x28: ffffffa50e1615d0 [ 18.572482] x27: ffffffc97f1e4538 x26: ffffffa50e161d7c [ 18.577964] x25: ffffffc96f795a80 x24: ffffffa50e1352d0 [ 18.583447] x23: ffffffa50e161d7c x22: ffffffc94e16a960 [ 18.588929] x21: ffffffa50bd0e017 x20: ffffffa50ca06208 [ 18.594411] x19: 00000000fffffffe x18: 0000000000000020 [ 18.599893] x17: ffffffa50d8f4000 x16: 000000000000003a [ 18.605376] x15: ffffffa50b4cf150 x14: 0000000000003837 [ 18.610858] x13: 0000000000000004 x12: 00000000151d96e9 [ 18.616340] x11: 0000000000000015 x10: 000000000682aaab [ 18.621823] x9 : 450514ed24766500 x8 : 450514ed24766500 [ 18.627305] x7 : ffffffa509d82700 x6 : 0000000000000000 [ 18.632787] x5 : 0000000000000080 x4 : 0000000000000001 [ 18.638269] x3 : ffffff800805b598 x2 : ffffffa509c97b48 [ 18.643752] x1 : ffffffa509d82874 x0 : 0000000000000000 [ 18.649234] Call trace: [ 18.651775] gpio_to_desc+0xac/0xc0 [ 18.655387] msm_pcie_probe+0x4e04/0x5418 [ 18.659528] platform_drv_probe+0x80/0xb8 [ 18.663669] really_probe+0x4e0/0x6b0 [ 18.667461] driver_probe_device+0x74/0x148 [ 18.671781] __driver_attach+0x120/0x1d8 [ 18.675833] bus_for_each_dev+0x84/0xd0 [ 18.679796] driver_attach+0x2c/0x38 [ 18.683498] bus_add_driver+0x144/0x268 [ 18.687461] driver_register+0x78/0x110 [ 18.691423] __platform_driver_register+0x4c/0x58 [ 18.696271] pcie_init+0x7b8/0x804 [ 18.699794] do_one_initcall+0x1ac/0x3c8 [ 18.703846] kernel_init_freeable+0x470/0x53c [ 18.708344] kernel_init+0x18/0x298 [ 18.711957] ret_from_fork+0x10/0x1c [ 18.715658] irq event stamp: 1110114 [ 18.719360] hardirqs last enabled at (1110113): [] console_unlock+0x4bc/0x568 [ 18.728399] hardirqs last disabled at (1110114): [] do_debug_exception+0x84/0x150 [ 18.737707] softirqs last enabled at (1110102): [] __do_softirq+0x50c/0x554 [ 18.746560] softirqs last disabled at (1110093): [] irq_exit+0xfc/0x120 [ 18.754966] ---[ end trace 1d70a345b84a86fe ]--- [ 18.960357] ------------[ cut here ]------------ [ 18.965131] invalid GPIO -2 [ 18.968028] WARNING: CPU: 7 PID: 1 at drivers/gpio/gpiolib.c:123 gpio_to_desc+0xac/0xc0 [ 18.976264] Modules linked in: [ 18.979423] CPU: 7 PID: 1 Comm: swapper/0 Tainted: G S W 4.19.157+ #1 [ 18.987212] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 18.994650] pstate: 60800005 (nZCv daif -PAN +UAO) [ 18.999588] pc : gpio_to_desc+0xac/0xc0 [ 19.003550] lr : gpio_to_desc+0xa8/0xc0 [ 19.007512] sp : ffffff800805b970 [ 19.010946] x29: ffffff800805b970 x28: ffffffa50e1615d0 [ 19.016428] x27: ffffffc97f1e4538 x26: ffffffa50e161d7c [ 19.021910] x25: ffffffc96f795a80 x24: ffffffa50e1352d0 [ 19.027393] x23: ffffffa50e161d7c x22: ffffffc94e16a960 [ 19.032875] x21: ffffffa50bd0e017 x20: ffffffa50ca06208 [ 19.038357] x19: 00000000fffffffe x18: 0000000000000020 [ 19.043840] x17: ffffffa50d8f4000 x16: 000000000000003a [ 19.049322] x15: ffffffa50b4cf150 x14: 0000000000003331 [ 19.054804] x13: 0000000000000004 x12: 00000000159fa6c4 [ 19.060287] x11: 0000000000000015 x10: 000000000682aaab [ 19.065769] x9 : 450514ed24766500 x8 : 450514ed24766500 [ 19.071251] x7 : ffffffa509d82700 x6 : 0000000000000000 [ 19.076733] x5 : 0000000000000080 x4 : 0000000000000001 [ 19.082216] x3 : ffffff800805b598 x2 : ffffffa509c97b48 [ 19.087699] x1 : ffffffa509d82874 x0 : 0000000000000000 [ 19.093181] Call trace: [ 19.095722] gpio_to_desc+0xac/0xc0 [ 19.099334] msm_pcie_probe+0x4e1c/0x5418 [ 19.103475] platform_drv_probe+0x80/0xb8 [ 19.107616] really_probe+0x4e0/0x6b0 [ 19.111408] driver_probe_device+0x74/0x148 [ 19.115728] __driver_attach+0x120/0x1d8 [ 19.119780] bus_for_each_dev+0x84/0xd0 [ 19.123743] driver_attach+0x2c/0x38 [ 19.127445] bus_add_driver+0x144/0x268 [ 19.131407] driver_register+0x78/0x110 [ 19.135370] __platform_driver_register+0x4c/0x58 [ 19.140218] pcie_init+0x7b8/0x804 [ 19.143741] do_one_initcall+0x1ac/0x3c8 [ 19.147793] kernel_init_freeable+0x470/0x53c [ 19.152292] kernel_init+0x18/0x298 [ 19.155904] ret_from_fork+0x10/0x1c [ 19.159606] irq event stamp: 1110174 [ 19.163307] hardirqs last enabled at (1110173): [] console_unlock+0x4bc/0x568 [ 19.172347] hardirqs last disabled at (1110174): [] do_debug_exception+0x84/0x150 [ 19.181654] softirqs last enabled at (1110162): [] __do_softirq+0x50c/0x554 [ 19.190507] softirqs last disabled at (1110151): [] irq_exit+0xfc/0x120 [ 19.198913] ---[ end trace 1d70a345b84a86ff ]--- [ 19.203767] ------------[ cut here ]------------ [ 19.208554] invalid GPIO -2 [ 19.211452] WARNING: CPU: 7 PID: 1 at drivers/gpio/gpiolib.c:123 gpio_to_desc+0xac/0xc0 [ 19.219687] Modules linked in: [ 19.222846] CPU: 7 PID: 1 Comm: swapper/0 Tainted: G S W 4.19.157+ #1 [ 19.230635] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 19.238073] pstate: 60800005 (nZCv daif -PAN +UAO) [ 19.243011] pc : gpio_to_desc+0xac/0xc0 [ 19.246973] lr : gpio_to_desc+0xa8/0xc0 [ 19.250935] sp : ffffff800805b950 [ 19.254368] x29: ffffff800805b950 x28: ffffffa50e1615d0 [ 19.259851] x27: ffffffc97f1e4538 x26: ffffffa50e161d7c [ 19.265333] x25: ffffffc96f795a80 x24: ffffffa50e1352d0 [ 19.270815] x23: ffffffa50e161d7c x22: ffffffc94e16a960 [ 19.276297] x21: ffffffa50bd0e061 x20: ffffffa50ca06208 [ 19.281780] x19: 00000000fffffffe x18: 0000000000000020 [ 19.287262] x17: ffffffa50d8f4000 x16: 000000000000003a [ 19.292744] x15: ffffffa50b4cf150 x14: 0000000000003534 [ 19.298227] x13: 0000000000000004 x12: 0000000015e6f789 [ 19.303710] x11: 0000000000000015 x10: 000000000682aaab [ 19.309192] x9 : 450514ed24766500 x8 : 450514ed24766500 [ 19.314674] x7 : ffffffa509d82700 x6 : 0000000000000000 [ 19.320157] x5 : 0000000000000080 x4 : 0000000000000001 [ 19.325639] x3 : ffffff800805b578 x2 : ffffffa509c97b48 [ 19.331121] x1 : ffffffa509d82874 x0 : 0000000000000000 [ 19.336604] Call trace: [ 19.339144] gpio_to_desc+0xac/0xc0 [ 19.342757] gpio_request+0x20/0x48 [ 19.346370] msm_pcie_probe+0x4e54/0x5418 [ 19.350511] platform_drv_probe+0x80/0xb8 [ 19.354652] really_probe+0x4e0/0x6b0 [ 19.358443] driver_probe_device+0x74/0x148 [ 19.362764] __driver_attach+0x120/0x1d8 [ 19.366816] bus_for_each_dev+0x84/0xd0 [ 19.370778] driver_attach+0x2c/0x38 [ 19.374480] bus_add_driver+0x144/0x268 [ 19.378443] driver_register+0x78/0x110 [ 19.382406] __platform_driver_register+0x4c/0x58 [ 19.387254] pcie_init+0x7b8/0x804 [ 19.390777] do_one_initcall+0x1ac/0x3c8 [ 19.394828] kernel_init_freeable+0x470/0x53c [ 19.399327] kernel_init+0x18/0x298 [ 19.402940] ret_from_fork+0x10/0x1c [ 19.406641] irq event stamp: 1110262 [ 19.410343] hardirqs last enabled at (1110261): [] console_unlock+0x4bc/0x568 [ 19.419383] hardirqs last disabled at (1110262): [] do_debug_exception+0x84/0x150 [ 19.428690] softirqs last enabled at (1110250): [] __do_softirq+0x50c/0x554 [ 19.437543] softirqs last disabled at (1110239): [] irq_exit+0xfc/0x120 [ 19.445949] ---[ end trace 1d70a345b84a8700 ]--- [ 19.450768] ------------[ cut here ]------------ [ 19.455540] invalid GPIO -2 [ 19.458447] WARNING: CPU: 7 PID: 1 at drivers/gpio/gpiolib.c:123 gpio_to_desc+0xac/0xc0 [ 19.466683] Modules linked in: [ 19.469843] CPU: 7 PID: 1 Comm: swapper/0 Tainted: G S W 4.19.157+ #1 [ 19.477631] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 19.485070] pstate: 60800005 (nZCv daif -PAN +UAO) [ 19.490007] pc : gpio_to_desc+0xac/0xc0 [ 19.493970] lr : gpio_to_desc+0xa8/0xc0 [ 19.497932] sp : ffffff800805b970 [ 19.501365] x29: ffffff800805b970 x28: ffffffa50e1615d0 [ 19.506847] x27: ffffffc97f1e4538 x26: ffffffa50e161d7c [ 19.512330] x25: ffffffc96f795a80 x24: ffffffa50e1352d0 [ 19.517812] x23: ffffffa50e161d7c x22: ffffffc94e16a960 [ 19.523294] x21: ffffffa50bd0e061 x20: ffffffa50ca06208 [ 19.528777] x19: 00000000fffffffe x18: 0000000000000020 [ 19.534259] x17: ffffffa50d8f4000 x16: 000000000000003a [ 19.539741] x15: ffffffa50b4cf150 x14: 0000000000003430 [ 19.545223] x13: 0000000000000004 x12: 00000000162f5436 [ 19.550706] x11: 0000000000000015 x10: 000000000682aaab [ 19.556188] x9 : 450514ed24766500 x8 : 450514ed24766500 [ 19.561670] x7 : ffffffa509d82700 x6 : 0000000000000000 [ 19.567152] x5 : 0000000000000080 x4 : 0000000000000001 [ 19.572635] x3 : ffffff800805b598 x2 : ffffffa509c97b48 [ 19.578117] x1 : ffffffa509d82874 x0 : 0000000000000000 [ 19.583599] Call trace: [ 19.586140] gpio_to_desc+0xac/0xc0 [ 19.589752] msm_pcie_probe+0x4e60/0x5418 [ 19.593893] platform_drv_probe+0x80/0xb8 [ 19.598034] really_probe+0x4e0/0x6b0 [ 19.601826] driver_probe_device+0x74/0x148 [ 19.606146] __driver_attach+0x120/0x1d8 [ 19.610198] bus_for_each_dev+0x84/0xd0 [ 19.614161] driver_attach+0x2c/0x38 [ 19.617862] bus_add_driver+0x144/0x268 [ 19.621825] driver_register+0x78/0x110 [ 19.625788] __platform_driver_register+0x4c/0x58 [ 19.630636] pcie_init+0x7b8/0x804 [ 19.634159] do_one_initcall+0x1ac/0x3c8 [ 19.638210] kernel_init_freeable+0x470/0x53c [ 19.642709] kernel_init+0x18/0x298 [ 19.646321] ret_from_fork+0x10/0x1c [ 19.650022] irq event stamp: 1110324 [ 19.653724] hardirqs last enabled at (1110323): [] console_unlock+0x4bc/0x568 [ 19.662764] hardirqs last disabled at (1110324): [] do_debug_exception+0x84/0x150 [ 19.672072] softirqs last enabled at (1110320): [] __do_softirq+0x50c/0x554 [ 19.680925] softirqs last disabled at (1110311): [] irq_exit+0xfc/0x120 [ 19.689331] ---[ end trace 1d70a345b84a8701 ]--- [ 19.896336] ------------[ cut here ]------------ [ 19.901111] invalid GPIO -2 [ 19.904007] WARNING: CPU: 7 PID: 1 at drivers/gpio/gpiolib.c:123 gpio_to_desc+0xac/0xc0 [ 19.912242] Modules linked in: [ 19.915403] CPU: 7 PID: 1 Comm: swapper/0 Tainted: G S W 4.19.157+ #1 [ 19.923191] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 19.930629] pstate: 60800005 (nZCv daif -PAN +UAO) [ 19.935567] pc : gpio_to_desc+0xac/0xc0 [ 19.939529] lr : gpio_to_desc+0xa8/0xc0 [ 19.943491] sp : ffffff800805b970 [ 19.946924] x29: ffffff800805b970 x28: ffffffa50e1615d0 [ 19.952407] x27: ffffffc97f1e4538 x26: ffffffa50e161d7c [ 19.957889] x25: ffffffc96f795a80 x24: ffffffa50e1352d0 [ 19.963371] x23: ffffffa50e161d7c x22: ffffffc94e16a960 [ 19.968854] x21: ffffffa50bd0e061 x20: ffffffa50ca06208 [ 19.974336] x19: 00000000fffffffe x18: 0000000000000020 [ 19.979818] x17: ffffffa50d8f4000 x16: 000000000000003a [ 19.985300] x15: ffffffa50b4cf150 x14: 0000000000003131 [ 19.990783] x13: 0000000000000004 x12: 0000000016b1dd35 [ 19.996265] x11: 0000000000000015 x10: 000000000682aaab [ 20.001747] x9 : 450514ed24766500 x8 : 450514ed24766500 [ 20.007230] x7 : ffffffa509d82700 x6 : 0000000000000000 [ 20.012712] x5 : 0000000000000080 x4 : 0000000000000001 [ 20.018194] x3 : ffffff800805b598 x2 : ffffffa509c97b48 [ 20.023676] x1 : ffffffa509d82874 x0 : 0000000000000000 [ 20.029159] Call trace: [ 20.031699] gpio_to_desc+0xac/0xc0 [ 20.035312] msm_pcie_probe+0x4e78/0x5418 [ 20.039452] platform_drv_probe+0x80/0xb8 [ 20.043594] really_probe+0x4e0/0x6b0 [ 20.047385] driver_probe_device+0x74/0x148 [ 20.051705] __driver_attach+0x120/0x1d8 [ 20.055757] bus_for_each_dev+0x84/0xd0 [ 20.059720] driver_attach+0x2c/0x38 [ 20.063422] bus_add_driver+0x144/0x268 [ 20.067385] driver_register+0x78/0x110 [ 20.071347] __platform_driver_register+0x4c/0x58 [ 20.076196] pcie_init+0x7b8/0x804 [ 20.079719] do_one_initcall+0x1ac/0x3c8 [ 20.083770] kernel_init_freeable+0x470/0x53c [ 20.088269] kernel_init+0x18/0x298 [ 20.091881] ret_from_fork+0x10/0x1c [ 20.095583] irq event stamp: 1110384 [ 20.099285] hardirqs last enabled at (1110383): [] console_unlock+0x4bc/0x568 [ 20.108324] hardirqs last disabled at (1110384): [] do_debug_exception+0x84/0x150 [ 20.117632] softirqs last enabled at (1110372): [] __do_softirq+0x50c/0x554 [ 20.126485] softirqs last disabled at (1110361): [] irq_exit+0xfc/0x120 [ 20.134891] ---[ end trace 1d70a345b84a8702 ]--- [ 20.141543] register_client_adhoc:find path.src 22 dest 512 [ 20.142829] register_client_adhoc:find path.src 23 dest 512 [ 20.149766] register_client_adhoc:Client handle 16 bus-proxy-client [ 20.157465] qupv3_geni_se 9c0000.qcom,qupv3_0_geni_se: Linked as a consumer to 15000000.apps-smmu [ 20.185672] iommu: Adding device 9c0000.qcom,qupv3_0_geni_se to group 5 [ 20.193952] qupv3_geni_se ac0000.qcom,qupv3_1_geni_se: Linked as a consumer to 15000000.apps-smmu [ 20.214753] iommu: Adding device ac0000.qcom,qupv3_1_geni_se to group 6 [ 20.222841] qupv3_geni_se 8c0000.qcom,qupv3_2_geni_se: Linked as a consumer to 15000000.apps-smmu [ 20.245553] iommu: Adding device 8c0000.qcom,qupv3_2_geni_se to group 7 [ 20.254280] gdsc ad07004.qcom,gdsc: Linked as a consumer to regulator.31 [ 20.261456] register_client_adhoc:find path.src 1 dest 589 [ 20.262778] register_client_adhoc:Client handle 17 bps_gdsc_ahb [ 20.268954] msm-bus-type slv-qhs-camera-cfg: Linked as a consumer to regulator.31 [ 20.283455] bps_gdsc: supplied by pm8150a_s4_level [ 20.289513] gdsc ad0a004.qcom,gdsc: Linked as a consumer to regulator.31 [ 20.296569] register_client_adhoc:find path.src 1 dest 589 [ 20.297706] register_client_adhoc:Client handle 18 ife_0_gdsc_ahb [ 20.303909] ife_0_gdsc: supplied by pm8150a_s4_level [ 20.316364] gdsc ad0b004.qcom,gdsc: Linked as a consumer to regulator.31 [ 20.323397] register_client_adhoc:find path.src 1 dest 589 [ 20.324568] register_client_adhoc:Client handle 19 ife_1_gdsc_ahb [ 20.330791] ife_1_gdsc: supplied by pm8150a_s4_level [ 20.343239] gdsc ad08004.qcom,gdsc: Linked as a consumer to regulator.31 [ 20.350277] register_client_adhoc:find path.src 1 dest 589 [ 20.351396] register_client_adhoc:Client handle 20 ipe_0_gdsc_ahb [ 20.357630] ipe_0_gdsc: supplied by pm8150a_s4_level [ 20.370079] gdsc ad09004.qcom,gdsc: Linked as a consumer to regulator.31 [ 20.377112] register_client_adhoc:find path.src 1 dest 589 [ 20.378225] register_client_adhoc:Client handle 21 sbi_gdsc_ahb [ 20.384477] sbi_gdsc: supplied by pm8150a_s4_level [ 20.396541] gdsc ad0c144.qcom,gdsc: Linked as a consumer to regulator.31 [ 20.403590] register_client_adhoc:find path.src 1 dest 589 [ 20.404733] register_client_adhoc:Client handle 22 titan_top_gdsc_ahb [ 20.410947] titan_top_gdsc: supplied by pm8150a_s4_level [ 20.424039] gdsc af03000.qcom,gdsc: Linked as a consumer to regulator.31 [ 20.431101] register_client_adhoc:find path.src 1 dest 590 [ 20.432287] register_client_adhoc:Client handle 23 mdss_core_gdsc_ahb [ 20.438280] msm-bus-type slv-qhs-display-cfg: Linked as a consumer to regulator.31 [ 20.453213] mdss_core_gdsc: supplied by pm8150a_s4_level [ 20.461447] gdsc abf0d18.qcom,gdsc: Linked as a consumer to regulator.31 [ 20.468515] register_client_adhoc:find path.src 1 dest 596 [ 20.469707] register_client_adhoc:Client handle 24 mvs0_gdsc_ahb [ 20.475680] msm-bus-type slv-qhs-venus-cfg: Linked as a consumer to regulator.31 [ 20.490059] mvs0_gdsc: supplied by pm8150a_s4_level [ 20.496076] gdsc abf0bf8.qcom,gdsc: Linked as a consumer to regulator.31 [ 20.503125] register_client_adhoc:find path.src 1 dest 596 [ 20.504332] register_client_adhoc:Client handle 25 mvs0c_gdsc_ahb [ 20.510680] mvs0c_gdsc: supplied by pm8150a_s4_level [ 20.523076] gdsc abf0d98.qcom,gdsc: Linked as a consumer to regulator.31 [ 20.530134] register_client_adhoc:find path.src 1 dest 596 [ 20.531320] register_client_adhoc:Client handle 26 mvs1_gdsc_ahb [ 20.537658] mvs1_gdsc: supplied by pm8150a_s4_level [ 20.549876] gdsc abf0c98.qcom,gdsc: Linked as a consumer to regulator.31 [ 20.556899] register_client_adhoc:find path.src 1 dest 596 [ 20.558086] register_client_adhoc:Client handle 27 mvs1c_gdsc_ahb [ 20.564431] mvs1c_gdsc: supplied by pm8150a_s4_level [ 20.576909] cam_cc-kona ad00000.qcom,camcc: Linked as a consumer to regulator.1 [ 20.584629] cam_cc-kona ad00000.qcom,camcc: Linked as a consumer to regulator.31 [ 20.592402] register_client_adhoc:find path.src 1 dest 589 [ 20.593534] register_client_adhoc:Client handle 28 clk_camcc_debugfs [ 20.609134] cam_cc-kona ad00000.qcom,camcc: Registered CAM CC clocks [ 20.622937] disp_cc-kona af00000.qcom,dispcc: Linked as a consumer to regulator.31 [ 20.630839] register_client_adhoc:find path.src 1 dest 590 [ 20.631993] register_client_adhoc:Client handle 29 clk_dispcc_debugfs [ 20.642186] disp_cc-kona af00000.qcom,dispcc: Registered Display CC clocks [ 20.656531] video_cc-kona abf0000.qcom,videocc: Linked as a consumer to regulator.1 [ 20.664578] video_cc-kona abf0000.qcom,videocc: Linked as a consumer to regulator.31 [ 20.672639] register_client_adhoc:find path.src 1 dest 596 [ 20.673842] register_client_adhoc:Client handle 30 clk_videocc_debugfs [ 20.681339] video_cc-kona abf0000.qcom,videocc: Registered Video CC clocks [ 20.695837] clocksource: Switched to clocksource arch_sys_counter [ 20.921500] VFS: Disk quotas dquot_6.6.0 [ 20.925763] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 20.933776] register_client_adhoc:find path.src 1 dest 589 [ 20.935101] register_client_adhoc:find path.src 1 dest 596 [ 20.941986] register_client_adhoc:find path.src 1 dest 590 [ 20.948806] register_client_adhoc:Client handle 31 clk_measure [ 20.970687] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL [ 20.982484] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 0 PLL PLL SSC enabled [ 20.991465] mdss_pll ae94900.qcom,mdss_dsi_pll: Failed to create ae94900.qcom,mdss_dsi_pll debugfs directory [ 21.001693] mdss_pll ae94900.qcom,mdss_dsi_pll: Failed to create ae94900.qcom,mdss_dsi_pll debugfs directory [ 21.011843] mdss_pll ae94900.qcom,mdss_dsi_pll: Failed to create ae94900.qcom,mdss_dsi_pll debugfs directory [ 21.021973] mdss_pll ae94900.qcom,mdss_dsi_pll: Failed to create ae94900.qcom,mdss_dsi_pll debugfs directory [ 21.032114] mdss_pll ae94900.qcom,mdss_dsi_pll: Failed to create ae94900.qcom,mdss_dsi_pll debugfs directory [ 21.042259] mdss_pll ae94900.qcom,mdss_dsi_pll: Failed to create ae94900.qcom,mdss_dsi_pll debugfs directory [ 21.065053] dsi_pll_clock_register_7nm: Registered DSI PLL ndx=0, clocks successfully [ 21.073265] mdss_pll_probe: MDSS pll label = MDSS DSI 1 PLL [ 21.079031] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 1 PLL PLL SSC enabled [ 21.087022] mdss_pll ae96900.qcom,mdss_dsi_pll: Failed to create ae96900.qcom,mdss_dsi_pll debugfs directory [ 21.097165] mdss_pll ae96900.qcom,mdss_dsi_pll: Failed to create ae96900.qcom,mdss_dsi_pll debugfs directory [ 21.107336] mdss_pll ae96900.qcom,mdss_dsi_pll: Failed to create ae96900.qcom,mdss_dsi_pll debugfs directory [ 21.117493] mdss_pll ae96900.qcom,mdss_dsi_pll: Failed to create ae96900.qcom,mdss_dsi_pll debugfs directory [ 21.127620] mdss_pll ae96900.qcom,mdss_dsi_pll: Failed to create ae96900.qcom,mdss_dsi_pll debugfs directory [ 21.137778] mdss_pll ae96900.qcom,mdss_dsi_pll: Failed to create ae96900.qcom,mdss_dsi_pll debugfs directory [ 21.160485] dsi_pll_clock_register_7nm: Registered DSI PLL ndx=1, clocks successfully [ 21.168685] mdss_pll_probe: MDSS pll label = MDSS DP PLL [ 21.176651] NET: Registered protocol family 2 [ 21.182700] tcp_listen_portaddr_hash hash table entries: 4096 (order: 6, 393216 bytes) [ 21.191170] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 21.200811] TCP bind hash table entries: 32768 (order: 9, 2883584 bytes) [ 21.208916] TCP: Hash tables configured (established 65536 bind 32768) [ 21.216706] UDP hash table entries: 4096 (order: 7, 786432 bytes) [ 21.223775] UDP-Lite hash table entries: 4096 (order: 7, 786432 bytes) [ 21.231444] NET: Registered protocol family 1 [ 21.237872] PCI: CLS 0 bytes, default 64 [ 21.238811] Trying to unpack rootfs image as initramfs... [ 21.264157] Freeing initrd memory: 1260K [ 21.271715] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 21.283833] cryptomgr_test (129) used greatest stack depth: 13824 bytes left [ 21.291293] cryptomgr_test (128) used greatest stack depth: 13504 bytes left [ 21.330716] Initialise system trusted keyrings [ 21.335543] workingset: timestamp_bits=45 max_order=21 bucket_order=0 [ 21.377639] Registering sdcardfs 0.1 [ 21.382514] fuse init (API version 7.27) [ 21.419192] Key type asymmetric registered [ 21.423465] Asymmetric key parser 'x509' registered [ 21.428557] io scheduler noop registered [ 21.433140] io scheduler cfq registered (default) [ 21.438020] io scheduler mq-deadline registered [ 21.442707] io scheduler kyber registered [ 21.447336] io scheduler bfq registered [ 21.460785] Virtual Services transport driver for OKL4 Axons [ 21.482050] gpi_dma 900000.qcom,gpi-dma: Linked as a consumer to 15000000.apps-smmu [ 21.491345] iommu: Adding device 900000.qcom,gpi-dma to group 8 [ 21.506282] gpi_dma a00000.qcom,gpi-dma: Linked as a consumer to 15000000.apps-smmu [ 21.515409] iommu: Adding device a00000.qcom,gpi-dma to group 9 [ 21.527068] gpi_dma 800000.qcom,gpi-dma: Linked as a consumer to 15000000.apps-smmu [ 21.536160] iommu: Adding device 800000.qcom,gpi-dma to group 10 [ 21.554659] kona-llcc 9200000.cache-controller: Failed to create 9200000.cache-controller debugfs directory [ 21.567884] register_client_adhoc:find path.src 125 dest 512 [ 21.569646] register_client_adhoc:Client handle 32 scm_pas [ 21.575531] minidump-id not found for ipa_fws [ 21.586027] subsys-pil-tz soc:qcom,ipa_fws: for ipa_fws segments only will be dumped. [ 21.594297] subsys-pil-tz soc:qcom,ipa_fws: for md_ipa_fws segments only will be dumped. [ 21.603322] minidump-id not found for ipa_uc [ 21.608034] subsys-pil-tz soc:qcom,ipa_uc: for ipa_uc segments only will be dumped. [ 21.616093] subsys-pil-tz soc:qcom,ipa_uc: for md_ipa_uc segments only will be dumped. [ 21.625140] subsys-pil-tz 17300000.qcom,lpass: Linked as a consumer to regulator.20 [ 21.633223] subsys-pil-tz 17300000.qcom,lpass: Linked as a consumer to regulator.12 [ 21.641129] minidump-id not found for adsp [ 21.647624] subsys-pil-tz 8300000.qcom,turing: Linked as a consumer to regulator.4 [ 21.655551] register_client_adhoc:find path.src 154 dest 10070 [ 21.655822] register_client_adhoc:Client handle 33 pil-cdsp [ 21.661866] minidump-id not found for cdsp [ 21.674164] subsys-pil-tz aab0000.qcom,venus: Linked as a consumer to regulator.81 [ 21.682098] register_client_adhoc:find path.src 63 dest 512 [ 21.683266] register_client_adhoc:Client handle 34 pil-venus [ 21.689053] minidump-id not found for venus [ 21.700534] subsys-pil-tz 188101c.qcom,spss: Linked as a consumer to regulator.4 [ 21.708235] minidump-id not found for spss [ 21.713678] minidump-id not found for cvpss [ 21.718160] subsys-pil-tz abb0000.qcom,cvpss: for cvpss segments only will be dumped. [ 21.726377] subsys-pil-tz abb0000.qcom,cvpss: for md_cvpss segments only will be dumped. [ 21.735291] minidump-id not found for npu [ 21.739631] subsys-pil-tz 9800000.qcom,npu: for npu segments only will be dumped. [ 21.747449] subsys-pil-tz 9800000.qcom,npu: for md_npu segments only will be dumped. [ 21.755917] subsys-restart: __get_smem_state(): Could not get smem-states qcom,force-stop [ 21.765625] subsys-pil-tz 5c00000.qcom,ssc: Linked as a consumer to regulator.20 [ 21.773501] subsys-pil-tz 5c00000.qcom,ssc: Linked as a consumer to regulator.12 [ 21.781159] minidump-id not found for slpi [ 21.787544] minidump-id not found for a650_zap [ 21.792343] subsys-pil-tz soc:qcom,kgsl-hyp: for a650_zap segments only will be dumped. [ 21.800799] subsys-pil-tz soc:qcom,kgsl-hyp: for md_a650_zap segments only will be dumped. [ 21.822330] qbt:qbt_probe: entry [ 21.823052] input: qbt_key_input as /devices/virtual/input/input1 [ 21.829743] qbt:setup_fd_gpio_irq: rc 0 [ 21.829891] qbt:setup_ipc_irq: irq 405 gpio 1123 [ 21.831025] qbt:qbt_probe: exit : 0 [ 21.840721] msm_geni_serial 998000.qcom,qup_uart: Wakeup byte 0xfd [ 21.847625] msm_geni_serial 998000.qcom,qup_uart: Serial port0 added.FifoSize 64 is_console0 [ 21.859092] 998000.qcom,qup_uart: ttyHS0 at MMIO 0x998000 (irq = 334, base_baud = 0) is a MSM [ 21.870754] msm_geni_serial a90000.qcom,qup_uart: Serial port0 added.FifoSize 64 is_console1 [ 21.879781] a90000.qcom,qup_uart: ttyMSM0 at MMIO 0xa90000 (irq = 337, base_baud = 0) is a MSM [ 21.903887] console [ttyMSM0] enabled [ 21.911559] bootconsole [msm_geni_serial0] disabled [ 21.924143] msm_geni_serial 880000.qcom,qup_uart: No wakeup IRQ configured [ 21.931594] msm_geni_serial 880000.qcom,qup_uart: Serial port1 added.FifoSize 64 is_console0 [ 21.942886] 880000.qcom,qup_uart: ttyHS1 at MMIO 0x880000 (irq = 339, base_baud = 0) is a MSM [ 21.952529] msm_geni_serial_init: Driver initialized [ 21.960205] register_client_adhoc:find path.src 1 dest 618 [ 21.961429] register_client_adhoc:Client handle 35 msm-rng-noc [ 21.970167] random: crng init done [ 22.026806] iommu-debug soc:kgsl_iommu_test_device: Linked as a consumer to 3da0000.kgsl-smmu [ 22.035812] iommu: Adding device soc:kgsl_iommu_test_device to group 11 [ 22.043596] iommu-debug soc:apps_iommu_test_device: Linked as a consumer to 15000000.apps-smmu [ 22.052788] iommu: Adding device soc:apps_iommu_test_device to group 12 [ 22.060530] iommu-debug soc:apps_iommu_coherent_test_device: Linked as a consumer to 15000000.apps-smmu [ 22.070351] iommu: Adding device soc:apps_iommu_coherent_test_device to group 13 [ 22.110046] brd: module loaded [ 22.158057] loop: module loaded [ 22.162520] zram: Added device: zram0 [ 22.169377] QSEECOM: qseecom_init_control: qseecom.qsee_version = 0x1402000 [ 22.176663] QSEECOM: qseecom_retrieve_ce_data: Device does not support PFE [ 22.192221] fan_f vendor:qcom,fan_f: Fan_probe start! [ 22.197525] fan_f vendor:qcom,fan_f: Fan_en_gpio = 1130 [ 22.202927] fan_f vendor:qcom,fan_f: Fan gpio_is_valid_return = 1 [ 22.209607] fan_f vendor:qcom,fan_f: Fan_probe end! [ 22.215609] qce 1de0000.qcedev: Linked as a consumer to 15000000.apps-smmu [ 22.223906] iommu: Adding device 1de0000.qcedev to group 14 [ 22.230703] register_client_adhoc:find path.src 125 dest 512 [ 22.232412] register_client_adhoc:Client handle 36 qcedev-noc [ 22.238542] QCE50: __qce_get_device_tree_data: CE operating frequency is not defined, setting to default 100MHZ [ 22.255533] qce 1de0000.qcedev: QTI Crypto 5.5.0 device found @0x1de0000 [ 22.263391] sps:BAM 0x0000000001dc4000 is registered. [ 22.263720] sps:BAM 0x0000000001dc4000 (va:0xffffff801a600000) enabled: ver:0x27, number of pipes:16 [ 22.278884] QCE50: qce_sps_init: QTI MSM CE-BAM at 0x0000000001dc4000 irq 39 [ 22.287108] qce 1de0000.qcedev:qcom_cedev_ns_cb: Linked as a consumer to 15000000.apps-smmu [ 22.296959] iommu: Adding device 1de0000.qcedev:qcom_cedev_ns_cb to group 15 [ 22.305438] qce 1de0000.qcedev:qcom_cedev_s_cb: Linked as a consumer to 15000000.apps-smmu [ 22.315943] iommu: Adding device 1de0000.qcedev:qcom_cedev_s_cb to group 16 [ 22.326106] qcrypto 1de0000.qcrypto: Linked as a consumer to 15000000.apps-smmu [ 22.334569] iommu: Adding device 1de0000.qcrypto to group 17 [ 22.341111] register_client_adhoc:find path.src 125 dest 512 [ 22.342702] register_client_adhoc:Client handle 37 qcrypto-noc [ 22.348779] QCE50: __qce_get_device_tree_data: CE operating frequency is not defined, setting to default 100MHZ [ 22.365838] qcrypto 1de0000.qcrypto: QTI Crypto 5.5.0 device found @0x1de0000 [ 22.373807] QCE50: qce_sps_init: QTI MSM CE-BAM at 0x0000000001dc4000 irq 39 [ 22.382238] qcrypto 1de0000.qcrypto: qcrypto-ecb-aes [ 22.388160] qcrypto 1de0000.qcrypto: qcrypto-cbc-aes [ 22.394060] qcrypto 1de0000.qcrypto: qcrypto-ctr-aes [ 22.399974] qcrypto 1de0000.qcrypto: qcrypto-ecb-des [ 22.406215] qcrypto 1de0000.qcrypto: qcrypto-cbc-des [ 22.412101] qcrypto 1de0000.qcrypto: qcrypto-ecb-3des [ 22.418091] qcrypto 1de0000.qcrypto: qcrypto-cbc-3des [ 22.424027] qcrypto 1de0000.qcrypto: qcrypto-xts-aes [ 22.430067] qcrypto 1de0000.qcrypto: qcrypto-sha1 [ 22.435654] qcrypto 1de0000.qcrypto: qcrypto-sha256 [ 22.441404] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes [ 22.448692] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des [ 22.455858] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des [ 22.463398] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes [ 22.470754] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des [ 22.478089] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des [ 22.485593] qcrypto 1de0000.qcrypto: qcrypto-hmac-sha1 [ 22.491678] qcrypto 1de0000.qcrypto: qcrypto-hmac-sha256 [ 22.498140] qcrypto 1de0000.qcrypto: qcrypto-aes-ccm [ 22.503998] qcrypto 1de0000.qcrypto: qcrypto-rfc4309-aes-ccm [ 22.515874] usb_extcon_detect_cable@108: vbus=1 \x0d [ 22.523100] ufshcd-qcom 1d84000.ufshc: no vccq2-voltage-level property. [ 22.530421] ufshcd-qcom 1d84000.ufshc: Linked as a consumer to regulator.62 [ 22.538276] ufshcd-qcom 1d84000.ufshc: Linked as a consumer to regulator.28 [ 22.545668] ufshcd-qcom 1d84000.ufshc: Linked as a consumer to regulator.16 [ 22.553028] ufshcd-qcom 1d84000.ufshc: Linked as a consumer to regulator.7 [ 22.561735] register_client_adhoc:find path.src 123 dest 512 [ 22.563319] register_client_adhoc:find path.src 1 dest 757 [ 22.570405] register_client_adhoc:Client handle 38 ufshc_mem [ 22.576703] ufs_qcom_phy_qmp_v4 1d87000.ufsphy_mem: Linked as a consumer to regulator.18 [ 22.591123] ufs_qcom_phy_qmp_v4 1d87000.ufsphy_mem: Linked as a consumer to regulator.13 [ 22.599663] ufshcd-qcom 1d84000.ufshc: Linked as a consumer to regulator.36 [ 22.610526] scsi host0: ufshcd [ 22.628128] SCSI Media Changer driver v0.25 [ 22.638534] spmi spmi-1: pmic_arb_debug_wait_for_done: transaction failed (0x3) [ 22.643956] ufshcd-qcom 1d84000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0 [ 22.648992] spmi spmi-1: pmic_arb_debug_wait_for_done: transaction failed (0x3) [ 22.667993] spmi spmi-1: SPMI PMIC arbiter debug bus controller added [ 22.675346] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) [ 22.688157] libphy: Fixed MDIO Bus: probed [ 22.692502] tun: Universal TUN/TAP device driver, 1.6 [ 22.697858] CAN device driver interface [ 22.700714] ufshcd-qcom 1d84000.ufshc: ufshcd_needs_reinit: Re-init UFS host to use proper PHY settings for the UFS device. This can be avoided by setting the force-g4 in DT [ 22.703065] lan743x 0001:01:00.0: Linked as a consumer to 15000000.apps-smmu [ 22.725965] iommu: Adding device 0001:01:00.0 to group 3 [ 22.731844] ethernet: enter lan743x_pcidev_probe - lan743x [ 22.731969] pci-msm-rc 0001:00:00.0: enabling device (0006 -> 0007) [ 22.744335] lan743x 0001:01:00.0: enabling device (0000 -> 0002) [ 22.748626] ufshcd-qcom 1d84000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0 [ 22.750643] lan743x 0001:01:00.0 (unnamed net_device) (uninitialized): PCI: Vendor ID = 0x1055, Device ID = 0x7431 [ 22.774533] lan743x 0001:01:00.0 (unnamed net_device) (uninitialized): ID_REV = 0x74310011, FPGA_REV = 0.0 [ 22.784664] lan743x 0001:01:00.0 (unnamed net_device) (uninitialized): MAC address set to 00:80:0f:74:31:00 [ 22.820044] ufshcd-qcom 1d84000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[4, 4], lane[2, 2], pwr[FAST MODE, FAST MODE], rate = 1 [ 22.833253] ufshcd-qcom 1d84000.ufshc: ufshcd_wb_config: Write Booster Configured [ 22.845551] scsi 0:0:0:49488: Well-known LUN SKhynix HN8T05BZGKX015 A043 PQ: 0 ANSI: 6 [ 22.866026] scsi 0:0:0:49476: Well-known LUN SKhynix HN8T05BZGKX015 A043 PQ: 0 ANSI: 6 [ 22.883563] scsi 0:0:0:49456: Well-known LUN SKhynix HN8T05BZGKX015 A043 PQ: 0 ANSI: 6 [ 22.914609] scsi 0:0:0:0: Direct-Access SKhynix HN8T05BZGKX015 A043 PQ: 0 ANSI: 6 [ 22.928174] scsi 0:0:0:1: Direct-Access SKhynix HN8T05BZGKX015 A043 PQ: 0 ANSI: 6 [ 22.940990] scsi 0:0:0:2: Direct-Access SKhynix HN8T05BZGKX015 A043 PQ: 0 ANSI: 6 [ 22.946773] mv2112_probe: mdio addr 0x0 [ 22.954138] scsi 0:0:0:3: Direct-Access SKhynix HN8T05BZGKX015 A043 PQ: 0 ANSI: 6 [ 22.967277] scsi 0:0:0:4: Direct-Access SKhynix HN8T05BZGKX015 A043 PQ: 0 ANSI: 6 [ 22.971517] libphy: lan743x-mdiobus-ext: probed [ 22.981555] PPP generic driver version 2.4.2 [ 22.986203] PPP BSD Compression module registered [ 22.988630] scsi 0:0:0:5: Direct-Access SKhynix HN8T05BZGKX015 A043 PQ: 0 ANSI: 6 [ 22.991099] PPP Deflate Compression module registered [ 23.004672] PPP MPPE Compression module registered [ 23.008494] sd 0:0:0:0: Power-on or device reset occurred [ 23.009638] NET: Registered protocol family 24 [ 23.015803] sd 0:0:0:1: Power-on or device reset occurred [ 23.019820] PPTP driver version 0.8.5 [ 23.021901] CLD80211: Initializing [ 23.024638] cnss: set_wlaon_pwr_ctrl is 1 [ 23.024781] cnss: Get CPR PMIC address 0x43200 from smpf2 [ 23.024806] cnss: TCS CMD base address is 0x000000000b2e5510 with length 0x00000000000005c0 [ 23.025896] sd 0:0:0:2: Power-on or device reset occurred [ 23.027075] cnss2 b0000000.qcom,cnss-qca6390: Linked as a consumer to regulator.7 [ 23.027134] cnss: Got regulator: vdd-wlan-io, min_uv: 1800000, max_uv: 1800000, load_ua: 0, delay_us: 0, need_unvote: 1 [ 23.029634] usbcore: registered new interface driver r8152 [ 23.031427] cnss2 b0000000.qcom,cnss-qca6390: Linked as a consumer to regulator.41 [ 23.031453] cnss: Got regulator: wlan-ant-switch, min_uv: 1800000, max_uv: 1800000, load_ua: 0, delay_us: 0, need_unvote: 0 [ 23.033226] cnss2 b0000000.qcom,cnss-qca6390: Linked as a consumer to regulator.9 [ 23.033534] sd 0:0:0:3: Power-on or device reset occurred [ 23.035629] sd 0:0:0:4: Power-on or device reset occurred [ 23.036816] sd 0:0:0:5: Power-on or device reset occurred [ 23.038784] usbcore: registered new interface driver lan78xx [ 23.038932] sd 0:0:0:3: [sdd] Write Protect is off [ 23.038945] sd 0:0:0:3: [sdd] Mode Sense: 00 32 00 10 [ 23.040142] sd 0:0:0:1: [sdb] Write Protect is off [ 23.040177] sd 0:0:0:1: [sdb] Mode Sense: 00 32 00 10 [ 23.040275] sd 0:0:0:0: [sda] Write Protect is off [ 23.040284] sd 0:0:0:0: [sda] Mode Sense: 00 32 00 10 [ 23.041278] sd 0:0:0:3: [sdd] Optimal transfer size 524288 bytes [ 23.042183] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes [ 23.042775] sd 0:0:0:4: [sde] Write Protect is off [ 23.042832] sd 0:0:0:4: [sde] Mode Sense: 00 32 00 10 [ 23.043069] sd 0:0:0:5: [sdf] Write Protect is off [ 23.043082] sd 0:0:0:5: [sdf] Mode Sense: 00 32 00 10 [ 23.044259] sd 0:0:0:4: [sde] Optimal transfer size 524288 bytes [ 23.044401] sd 0:0:0:5: [sdf] Optimal transfer size 524288 bytes [ 23.046722] sd 0:0:0:1: [sdb] Optimal transfer size 524288 bytes [ 23.047860] sd 0:0:0:2: [sdc] Write Protect is off [ 23.047910] sd 0:0:0:2: [sdc] Mode Sense: 00 32 00 10 [ 23.049230] sd 0:0:0:2: [sdc] Optimal transfer size 524288 bytes [ 23.052253] usbcore: registered new interface driver asix [ 23.061054] cnss: Got regulator: vdd-wlan-aon, min_uv: 950000, max_uv: 950000, load_ua: 0, delay_us: 0, need_unvote: 1 [ 23.067805] usbcore: registered new interface driver ax88179_178a [ 23.067850] usbcore: registered new interface driver cdc_ether [ 23.067931] usbcore: registered new interface driver net1080 [ 23.074035] cnss2 b0000000.qcom,cnss-qca6390: Linked as a consumer to regulator.51 [ 23.079052] sdd: sdd1 sdd2 sdd3 sdd4 [ 23.079202] usbcore: registered new interface driver cdc_subset [ 23.079865] sdb: sdb1 sdb2 [ 23.081002] sdf: sdf1 sdf2 sdf3 sdf4 sdf5 sdf6 sdf7 sdf8 sdf9 [ 23.081121] sdc: sdc1 sdc2 [ 23.082411] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 [ 23.082709] sde: sde1 sde2 sde3 sde4 sde5 sde6 sde7 sde8 sde9 sde10 sde11 sde12 sde13 sde14 sde15 sde16 sde17 sde18 sde19 sde20 sde21 sde22 sde23 sde24 sde25 sde26 sde27 sde28 sde29 sde30 sde31 sde32 sde33 sde34 sde35 sde36 sde37 sde38 sde39 sde40 sde41 sde42 sde43 sde44 sde45 sde46 sde47 sde48 sde49 sde50 sde51 sde52 sde53 sde54 sde55 sde56 sde57 sde58 sde59 sde60 [ 23.084748] cnss: Got regulator: vdd-wlan-dig, min_uv: 950000, max_uv: 952000, load_ua: 0, delay_us: 0, need_unvote: 1 [ 23.090644] usbcore: registered new interface driver zaurus [ 23.095747] cnss2 b0000000.qcom,cnss-qca6390: Linked as a consumer to regulator.8 [ 23.100566] usbcore: registered new interface driver cdc_ncm [ 23.105471] cnss: Got regulator: vdd-wlan-rfa1, min_uv: 1900000, max_uv: 1900000, load_ua: 0, delay_us: 0, need_unvote: 1 [ 23.105678] cnss2 b0000000.qcom,cnss-qca6390: Linked as a consumer to regulator.36 [ 23.281154] cnss: Got regulator: vdd-wlan-rfa2, min_uv: 1350000, max_uv: 1350000, load_ua: 0, delay_us: 0, need_unvote: 1 [ 23.281354] cnss: Failed to get optional clock rf_clk, err = -2 [ 23.281748] msm-usb-ssphy-qmp 88e8000.ssphy: Linked as a consumer to regulator.29 [ 23.281759] cnss: BT GPIO: 1121 [ 23.289524] cnss: Switch control GPIO: 1224 [ 23.289532] cnss: Regulator vdd-wlan-io is being enabled [ 23.289560] cnss: Regulator wlan-ant-switch is being enabled [ 23.289673] msm-usb-ssphy-qmp 88e8000.ssphy: Linked as a consumer to regulator.18 [ 23.289938] cnss: Regulator vdd-wlan-aon is being enabled [ 23.297634] cnss: Regulator vdd-wlan-dig is being enabled [ 23.298110] msm-usb-ssphy-qmp 88eb000.ssphy: Linked as a consumer to regulator.29 [ 23.298327] cnss: Regulator vdd-wlan-rfa1 is being enabled [ 23.306010] msm-usb-ssphy-qmp 88eb000.ssphy: Linked as a consumer to regulator.18 [ 23.306059] cnss: Regulator vdd-wlan-rfa2 is being enabled [ 23.313997] cnss: BT_EN_GPIO State: Off. Delay WLAN_GPIO enable [ 23.315558] msm-usb-hsphy 88e3000.hsphy: Linked as a consumer to regulator.13 [ 23.323166] msm-usb-hsphy 88e3000.hsphy: Linked as a consumer to regulator.10 [ 23.330719] msm-usb-hsphy 88e3000.hsphy: Linked as a consumer to regulator.21 [ 23.339338] msm-usb-hsphy 88e4000.hsphy: Linked as a consumer to regulator.13 [ 23.346864] msm-usb-hsphy 88e4000.hsphy: Linked as a consumer to regulator.10 [ 23.354392] msm-usb-hsphy 88e4000.hsphy: Linked as a consumer to regulator.21 [ 23.366242] msm-dwc3 a600000.ssusb: Linked as a consumer to 15000000.apps-smmu [ 23.374964] iommu: Adding device a600000.ssusb to group 18 [ 23.381419] msm-dwc3 a600000.ssusb: Linked as a consumer to regulator.63 [ 23.393465] dwc3 a600000.dwc3: Failed to get clk 'ref': -2 [ 23.399547] dwc3 a600000.dwc3: changing max_speed on rev 00000000 [ 23.416693] register_client_adhoc:find path.src 61 dest 512 [ 23.417373] cnss: Assert WLAN_EN GPIO successfully [ 23.418467] register_client_adhoc:find path.src 61 dest 676 [ 23.420403] register_client_adhoc:find path.src 1 dest 583 [ 23.423241] msm_pcie_enable: PCIe: Assert the reset of endpoint of RC0. [ 23.430110] register_client_adhoc:Client handle 39 usb0 [ 23.430449] msm-dwc3 a600000.ssusb: Could not get usb psy [ 23.438375] msm_pcie_enable: PCIe: RC0: PCIE20_PARF_INT_ALL_MASK: 0x7f80d202 [ 23.441800] msm-dwc3 a600000.ssusb: Linked as a consumer to regulator.84 [ 23.442144] msm-dwc3 a600000.ssusb: Could not get usb psy [ 23.449138] pcie_phy_init: PCIe RC0 PHY is ready! [ 23.452550] msm-dwc3 a800000.ssusb: Linked as a consumer to 15000000.apps-smmu [ 23.469705] msm_pcie_enable: PCIe: Release the reset of endpoint of RC0. [ 23.473131] iommu: Adding device a800000.ssusb to group 19 [ 23.493437] msm_pcie_link_train: PCIe RC0 link initialized [ 23.497654] msm-dwc3 a800000.ssusb: Linked as a consumer to regulator.64 [ 23.500447] msm-dwc3 a600000.ssusb: DWC3 exited from low power mode [ 23.502947] pci-msm 1c00000.qcom,pcie: host bridge /soc/qcom,pcie@1c00000 ranges: [ 23.513571] dwc3 a800000.dwc3: Failed to get clk 'ref': -2 [ 23.516001] pci-msm 1c00000.qcom,pcie: No bus range found for /soc/qcom,pcie@1c00000, using [bus 00-ff] [ 23.524026] dwc3 a800000.dwc3: changing max_speed on rev 00000000 [ 23.529385] pci-msm 1c00000.qcom,pcie: IO 0x60200000..0x602fffff -> 0x60200000 [ 23.548846] register_client_adhoc:find path.src 101 dest 512 [ 23.550450] register_client_adhoc:find path.src 101 dest 676 [ 23.553334] pci-msm 1c00000.qcom,pcie: MEM 0x60300000..0x63ffffff -> 0x60300000 [ 23.561020] register_client_adhoc:find path.src 1 dest 751 [ 23.562182] register_client_adhoc:Client handle 40 usb1 [ 23.566425] pci-msm 1c00000.qcom,pcie: PCI host bridge to bus 0000:00 [ 23.575565] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 23.578287] pci_bus 0000:00: root bus resource [bus 00-ff] [ 23.583696] ehci-pci: EHCI PCI platform driver [ 23.590344] pci_bus 0000:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x60200000-0x602fffff]) [ 23.597118] ehci-platform: EHCI generic platform driver [ 23.602710] pci_bus 0000:00: root bus resource [mem 0x60300000-0x63ffffff] [ 23.608067] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 23.617485] pci 0000:00:00.0: [17cb:010b] type 01 class 0x060400 [ 23.622816] ohci-pci: OHCI PCI platform driver [ 23.628517] msm-dwc3 a800000.ssusb: DWC3 exited from low power mode [ 23.629970] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] [ 23.636321] ohci-platform: OHCI generic platform driver [ 23.641027] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 23.649086] usbcore: registered new interface driver cdc_acm [ 23.658595] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 23.660355] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 23.667204] usbcore: registered new interface driver usb-storage [ 23.675474] pci 0000:01:00.0: [17cb:1101] type 00 class 0x028000 [ 23.681434] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit] [ 23.681527] usbcore: registered new interface driver cp210x [ 23.681815] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 23.687374] usbserial: USB Serial support registered for cp210x [ 23.693643] usbcore: registered new interface driver ftdi_sio [ 23.693690] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 23.699626] usbserial: USB Serial support registered for FTDI USB Serial Device [ 23.699658] pci 0000:00:00.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000 [ 23.707160] pci 0000:00:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000 [ 23.707168] pci 0000:00:00.0: bridge window [mem 0x00100000-0x001fffff] to [bus 01] add_size 200000 add_align 100000 [ 23.707197] pci 0000:00:00.0: BAR 8: assigned [mem 0x60300000-0x605fffff] [ 23.707249] usbcore: registered new interface driver usb_ehset_test [ 23.714197] pci 0000:00:00.0: BAR 9: assigned [mem 0x60600000-0x607fffff 64bit pref] [ 23.714202] pci 0000:00:00.0: BAR 0: assigned [mem 0x60800000-0x60800fff 64bit] [ 23.720721] usbcore: registered new interface driver lvs [ 23.728674] pci 0000:00:00.0: BAR 7: assigned [io 0x100000-0x100fff] [ 23.740290] usbcore: registered new interface driver xpad [ 23.741654] pci 0000:01:00.0: BAR 0: assigned [mem 0x60300000-0x603fffff 64bit] [ 23.748358] usbcore: registered new interface driver usb_acecad [ 23.753936] pci 0000:00:00.0: PCI bridge to [bus 01] [ 23.761405] usbcore: registered new interface driver aiptek [ 23.767605] pci 0000:00:00.0: bridge window [io 0x100000-0x100fff] [ 23.772710] usbcore: registered new interface driver gtco [ 23.778364] pci 0000:00:00.0: bridge window [mem 0x60300000-0x605fffff] [ 23.785066] usbcore: registered new interface driver hanwang [ 23.790605] pci 0000:00:00.0: bridge window [mem 0x60600000-0x607fffff 64bit pref] [ 23.797612] usbcore: registered new interface driver kbtab [ 23.803635] pci-msm-rc 0000:00:00.0: Linked as a consumer to 15000000.apps-smmu [ 23.811491] cyttsp7_device_access_init: Cypress TTSP Device Access Driver (Built TTDA.02.06.908510) rc=0 [ 23.818272] iommu: Adding device 0000:00:00.0 to group 20 [ 23.827139] rtc-pm8xxx c440000.qcom,spmi:qcom,pm8150@0:qcom,pm8150_rtc: rtc core: registered pm8xxx_rtc as rtc0 [ 23.835809] msm_pcie_enumerate: PCIe: RC0: has already been enumerated. [ 23.835850] cnss_pci 0000:01:00.0: Linked as a consumer to 15000000.apps-smmu [ 23.840033] rtc-pm8xxx c440000.qcom,spmi:qcom,pm8150@0:qcom,pm8150_rtc: setting system clock to 1970-01-01 03:06:15 UTC (11175) [ 23.840551] i2c /dev entries driver [ 23.846498] iommu: Adding device 0000:01:00.0 to group 21 [ 23.847133] cnss: PCI is probing, vendor ID: 0x17cb, device ID: 0x1101 [ 23.847200] cnss_pci 0000:01:00.0: assigned reserved memory node cnss_wlan_region [ 23.847205] cnss: CMA area is cnss_wlan_region [ 23.847989] cnss: Powerup is ignored [ 23.848208] cnss: Ramdump size 0x420000 [ 23.848323] cnss2 b0000000.qcom,cnss-qca6390: for wlan segments only will be dumped. [ 23.848585] cnss: Initializing SMMU [ 23.848591] cnss: Enabling SMMU S1 stage [ 23.848599] cnss: smmu_iova_start: 0x00000000a0000000, smmu_iova_len: 0x10000000 [ 23.848605] cnss: smmu_iova_ipa_start: 0x00000000b0000000, smmu_iova_ipa_len: 0x10000 [ 23.848611] cnss: iommu_geometry: 0 [ 23.848619] cnss: PCIe DRV is supported [ 23.848787] cnss_pci 0000:01:00.0: BAR 0: assigned [mem 0x60300000-0x603fffff 64bit] [ 23.848859] pci-msm-rc 0000:00:00.0: enabling device (0006 -> 0007) [ 23.848881] cnss_pci 0000:01:00.0: enabling device (0000 -> 0002) [ 23.849269] cnss: Config PCIe remap window register to 0x4000003f [ 23.849298] cnss: Read register offset 0x1f8031c, val = 0x6 [ 23.849312] cnss: Write val 0x2 to register offset 0x1f8031c [ 23.853048] cnss: MSI base data is 800 [ 23.858545] i2c_geni 980000.i2c: Bus frequency is set to 400000Hz [ 23.864691] cnss: BAR starts at 0x0000000060300000, len-100000 [ 23.864699] cnss: Assign MSI to user: MHI, num_vectors: 3, user_base_data: 800, base_vector: 0 [ 23.878220] [MAX975X:max96755g_probe] *ERROR* begin [ 23.880181] cnss: Number of assigned MSI for MHI is 3, base vector is 0 [ 23.885980] max96755g 0-0040: Linked as a consumer to regulator.52 [ 23.893408] cnss: Get IRQ number 412 for vector index 0 [ 23.893414] cnss: Get IRQ number 413 for vector index 1 [ 23.939954] cnss: Get IRQ number 414 for vector index 2 [ 23.942115] cnss: Get device version info, family number: 0x4, device number: 0xa, major version: 0x2, minor version: 0x0 [ 23.942122] cnss: FW name added with prefix: qca6390/amss20.bin [ 23.942127] cnss: FW name is qca6390/amss20.bin, FW fallback name is amss20.bin [ 23.942140] cnss: Get PCI link status register: 4114 [ 23.942145] cnss: Default PCI link speed is 0x2, link width is 0x1 [ 23.942156] cnss: Config PCIe remap window register to 0x4000003c [ 23.942169] cnss: Config PCIe remap window register to 0x4000003f [ 23.942186] cnss: Read register offset 0x1f8031c, val = 0x2 [ 23.942198] cnss: Write val 0x3 to register offset 0x1f8031c [ 23.960319] cnss: Suspending PCI link [ 24.060953] msm_pcie_disable: PCIe: Assert the reset of endpoint of RC0. [ 24.069460] cnss: De-assert WLAN_EN GPIO successfully [ 24.069488] cnss: Regulator vdd-wlan-rfa2 is being disabled [ 24.069763] cnss: Regulator vdd-wlan-rfa1 is being disabled [ 24.069903] cnss: Regulator vdd-wlan-dig is being disabled [ 24.070040] cnss: Regulator vdd-wlan-aon is being disabled [ 24.070174] cnss: Regulator wlan-ant-switch is being disabled [ 24.070266] cnss: Regulator vdd-wlan-io is being disabled [ 24.071497] register_client_adhoc:find path.src 45 dest 512 [ 24.077418] register_client_adhoc:Client handle 41 msm-cnss [ 24.088862] cnss: Platform driver probed successfully. [ 24.457061] [MAX975X:max96755x_init] *ERROR* begin [ 24.572634] [MAX975X:max96755x_init] *ERROR* GPIO Pass [ 25.161168] [MAX975X:max96755x_init] *ERROR* read:752 0x13:ca [ 25.173096] [MAX975X:max96755x_init] *ERROR* read:755 0x13:ca [ 25.179096] [MAX975X:max96755x_init] *ERROR* done [ 25.705109] [MAX975X:max96755g_probe] *ERROR* done [ 25.705753] i2c_geni 980000.i2c: i2c error :-107 [ 25.713415] cyttsp7_i2c_adapter 0-0024: cyttsp7_init: INIT CYTTSP RST gpio=1106 and IRQ gpio=1107 ERR gpio=1123 [ 25.715173] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x00 [ 25.735749] i2c_geni 980000.i2c: i2c error :-107 [ 25.740570] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 25.816651] cyttsp7_i2c_adapter 0-0024: cyttsp7_xres: RESET CYTTSP gpio=1106 r=0 [ 26.824702] cyttsp7_i2c_adapter 0-0024: cyttsp7_wait_bl_heartbeat: tmo waiting bl heartbeat cd->mode=0 [ 26.834427] cyttsp7_i2c_adapter 0-0024: cyttsp7_startup_: Error on h/w reset r=-62 [ 26.932573] cyttsp7_i2c_adapter 0-0024: cyttsp7_xres: RESET CYTTSP gpio=1106 r=0 [ 27.752820] i2c_geni 980000.i2c: i2c error :-107 [ 27.757818] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x00 [ 27.767826] i2c_geni 980000.i2c: i2c error :-107 [ 27.772755] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 27.944543] cyttsp7_i2c_adapter 0-0024: cyttsp7_wait_bl_heartbeat: tmo waiting bl heartbeat cd->mode=0 [ 27.954260] cyttsp7_i2c_adapter 0-0024: cyttsp7_startup_: Error on h/w reset r=-62 [ 28.052467] cyttsp7_i2c_adapter 0-0024: cyttsp7_xres: RESET CYTTSP gpio=1106 r=0 [ 29.064595] cyttsp7_i2c_adapter 0-0024: cyttsp7_wait_bl_heartbeat: tmo waiting bl heartbeat cd->mode=0 [ 29.074316] cyttsp7_i2c_adapter 0-0024: cyttsp7_startup_: Error on h/w reset r=-62 [ 29.172572] cyttsp7_i2c_adapter 0-0024: cyttsp7_xres: RESET CYTTSP gpio=1106 r=0 [ 29.800882] i2c_geni 980000.i2c: i2c error :-107 [ 29.805747] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x00 [ 29.815816] i2c_geni 980000.i2c: i2c error :-107 [ 29.820681] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 30.184521] cyttsp7_i2c_adapter 0-0024: cyttsp7_wait_bl_heartbeat: tmo waiting bl heartbeat cd->mode=0 [ 30.194241] cyttsp7_i2c_adapter 0-0024: cyttsp7_startup_: Error on h/w reset r=-62 [ 30.202265] cyttsp7_i2c_adapter 0-0024: cyttsp7_startup_: cyttsp7_exit startup rc=-19... [ 30.211124] i2c_geni 980000.i2c: i2c error :-107 [ 30.215922] cyttsp7_i2c_adapter 0-0024: _cyttsp7_core_sleep_device: Fail read adapter r=-107 [ 30.224615] cyttsp7_i2c_adapter 0-0024: _cyttsp7_core_sleep_: sleep state rc -107 [ 30.276312] cyttsp7_i2c_adapter 0-0024: cyttsp7_core_rt_suspend: Error on sleep [ 30.283845] cyttsp7_i2c_adapter 0-0024: cyttsp7_probe: Fail initial startup r=-19 [ 30.292319] cyttsp7_i2c_adapter 0-0024: cyttsp7_probe failed. [ 30.299280] i2c_geni 994000.i2c: Bus frequency is set to 400000Hz [ 30.307543] i2c_geni a94000.i2c: Bus frequency is set to 400000Hz [ 30.315530] i2c_geni 884000.i2c: Bus frequency is set to 400000Hz [ 30.324005] I2C PMIC: i2c_pmic_probe: I2C PMIC probe successful [ 30.335983] msm_cvp_v4l2 ab00000.qcom,cvp:cvp_non_secure_cb: Linked as a consumer to 15000000.apps-smmu [ 30.346617] iommu: Adding device ab00000.qcom,cvp:cvp_non_secure_cb to group 22 [ 30.355128] msm_cvp_v4l2 ab00000.qcom,cvp:cvp_secure_nonpixel_cb: Linked as a consumer to 15000000.apps-smmu [ 30.366580] iommu: Adding device ab00000.qcom,cvp:cvp_secure_nonpixel_cb to group 23 [ 30.375486] msm_cvp_v4l2 ab00000.qcom,cvp:cvp_secure_pixel_cb: Linked as a consumer to 15000000.apps-smmu [ 30.386536] iommu: Adding device ab00000.qcom,cvp:cvp_secure_pixel_cb to group 24 [ 30.394784] platform ab00000.qcom,cvp:qcom,msm-cvp,mem_cdsp: assigned reserved memory node cdsp_region [ 30.406963] msm_npu 9900000.qcom,msm_npu: Linked as a consumer to 15000000.apps-smmu [ 30.415842] iommu: Adding device 9900000.qcom,msm_npu to group 25 [ 30.422684] NPU_INFO: npu_probe: 2505 unable to get qfprom_physical resource [ 30.430260] msm_npu 9900000.qcom,msm_npu: Linked as a consumer to regulator.79 [ 30.437875] msm_npu 9900000.qcom,msm_npu: Linked as a consumer to regulator.4 [ 30.446424] register_client_adhoc:find path.src 154 dest 512 [ 30.447655] register_client_adhoc:find path.src 154 dest 620 [ 30.454940] register_client_adhoc:Client handle 42 9900000.qcom,msm_npu [ 30.460773] NPU_INFO: npu_parse_dt_bw: 1832 NPU BW client sets up successfully [ 30.481750] synx: synx device init start [ 30.486562] synx: synx device init success [ 30.490980] usbcore: registered new interface driver uvcvideo [ 30.496902] USB Video Class driver (1.1.1) [ 30.501418] rtc6226 3-0064: Linked as a consumer to regulator.7 [ 30.507746] rtc6226 3-0064: Linked as a consumer to regulator.48 [ 30.616369] rtc6226: rtc6226_pinctrl_init: target does not use pinctrl [ 30.623102] rtc6226: rtc6226_i2c_probe: rtc6226_pinctrl_init returned -19 [ 30.637027] i2c_geni 884000.i2c: i2c error :-107 [ 30.641823] SMB1390: smb1390_read: Couldn't read 0x1006 [ 30.647218] SMB1390: smb1390_slave_probe: Couldn't find slave SMB1390 [ 30.653881] SMB1390: smb1390_probe: Couldn't probe SMB1390 Slave rc=-22 [ 30.660714] qcom,smb1390-charger-psy: probe of 884000.i2c:qcom,smb1390_slave@18:qcom,charge_pump_slave failed with error -22 [ 30.675817] HL6111R: hl6111r_probe: probe successful [ 30.684493] HL6111R: is_dc_online: DC psy unavailable [ 30.689765] HL6111R: is_dc_online: DC psy unavailable [ 30.694988] HL6111R: is_dc_online: DC psy unavailable [ 30.699590] msm_lmh_dcvs 18591000.qcom,cpufreq-hw:qcom,limits-dcvs: Linked as a consumer to regulator.22 [ 30.700203] HL6111R: is_dc_online: DC psy unavailable [ 30.710158] msm_lmh_dcvs 18591000.qcom,cpufreq-hw:qcom,limits-dcvs: Linked as a consumer to regulator.14 [ 30.715184] HL6111R: is_dc_online: DC psy unavailable [ 30.730135] HL6111R: is_dc_online: DC psy unavailable [ 30.735861] HL6111R: is_dc_online: DC psy unavailable [ 30.736422] device-mapper: uevent: version 1.0.3 [ 30.741083] HL6111R: is_dc_online: DC psy unavailable [ 30.746600] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com [ 30.751074] HL6111R: is_dc_online: DC psy unavailable [ 30.762223] bt_dt_parse_vreg_info: qca,bt-vdd-core: is not provided in device tree [ 30.764970] HL6111R: is_dc_online: DC psy unavailable [ 30.772782] bt_dt_parse_vreg_info: qca,bt-vdd-io: is not provided in device tree [ 30.785639] bt_dt_parse_vreg_info: qca,bt-vdd-xtal: is not provided in device tree [ 30.793455] bt_dt_parse_vreg_info: qca,bt-vdd-pa: is not provided in device tree [ 30.801078] bt_dt_parse_vreg_info: qca,bt-vdd-ldo: is not provided in device tree [ 30.808801] bt_dt_parse_vreg_info: qca,bt-chip-pwd: is not provided in device tree [ 30.816645] bt_dt_parse_clk_info: clocks is not provided in device tree [ 30.825645] EDAC DEVICE0: Giving out device to module soc:kryo-erp controller cache: DEV soc:kryo-erp (INTERRUPT) [ 30.838257] qcom_llcc_edac qcom_llcc_edac: No ECC IRQ; defaulting to polling mode [ 30.846131] EDAC DEVICE1: Giving out device to module qcom_llcc_edac controller llcc: DEV qcom_llcc_edac (POLLED) [ 30.858432] sdhci: Secure Digital Host Controller Interface driver [ 30.864808] sdhci: Copyright(c) Pierre Ossman [ 30.869320] sdhci-pltfm: SDHCI platform and OF driver helper [ 30.877548] hidraw: raw HID events driver (C) Jiri Kosina [ 30.879100] tz diag version is 2401000 [ 30.884100] usbcore: registered new interface driver usbhid [ 30.884769] sdhci_msm 8804000.sdhci: core_reset unavailable,err = -2 [ 30.884787] sdhci_msm 8804000.sdhci: Reset data parsing error [ 30.886342] register_client_adhoc:find path.src 81 dest 512 [ 30.887375] scm_call failed: func id 0x7200010b, ret: -1, syscall returns: 0x0, 0x0, 0x0 [ 30.892909] usbhid: USB HID core driver [ 30.894512] register_client_adhoc:find path.src 1 dest 608 [ 30.899434] scm_call QUERY_ENCR_LOG_FEATURE failed ret -95 [ 30.900250] register_client_adhoc:Client handle 43 sdhc2 [ 30.906364] ashmem: initialized [ 30.907104] sdhci_msm 8804000.sdhci: Linked as a consumer to regulator.45 [ 30.907827] sdhci_msm 8804000.sdhci: Linked as a consumer to regulator.42 [ 30.957505] ipa_ut ipa_ut_module_init:1036 Loading IPA test module... [ 30.961514] mmc0: SDHCI controller on 8804000.sdhci [8804000.sdhci] using 64-bit ADMA in legacy mode [ 30.965903] usb_bam_init: setting SPS_BAM_SMMU_EN flag with (a704000.qcom,usbbam) [ 30.982155] sps:BAM 0x000000000a704000 is registered. [ 30.982549] bimc-bwmon 90b6400.qcom,cpu-cpu-llcc-bwmon: BW HWmon governor registered. [ 30.995983] bimc-bwmon 9091000.qcom,cpu-llcc-ddr-bwmon: BW HWmon governor registered. [ 31.004615] bimc-bwmon 60400.qcom,npu-npu-llcc-bwmon: BW HWmon governor registered. [ 31.012652] bimc-bwmon 9093000.qcom,npu-llcc-ddr-bwmon: BW HWmon governor registered. [ 31.021259] bimc-bwmon 70300.qcom,npudsp-npu-ddr-bwmon: BW HWmon governor registered. [ 31.031861] arm-memlat-mon soc:qcom,cpu0-cpugrp:qcom,cpu0-cpu-l3-latmon: Memory Latency governor registered. [ 31.042588] arm-memlat-mon soc:qcom,cpu0-cpugrp:qcom,cpu0-cpu-llcc-latmon: Memory Latency governor registered. [ 31.053414] arm-memlat-mon soc:qcom,cpu0-cpugrp:qcom,cpu0-llcc-ddr-latmon: Memory Latency governor registered. [ 31.064367] arm-memlat-mon soc:qcom,cpu4-cpugrp:qcom,cpu4-cpu-l3-latmon: Memory Latency governor registered. [ 31.075018] arm-memlat-mon soc:qcom,cpu4-cpugrp:qcom,cpu7-cpu-l3-latmon: Memory Latency governor registered. [ 31.085737] arm-memlat-mon soc:qcom,cpu4-cpugrp:qcom,cpu4-cpu-llcc-latmon: Memory Latency governor registered. [ 31.096624] arm-memlat-mon soc:qcom,cpu4-cpugrp:qcom,cpu4-llcc-ddr-latmon: Memory Latency governor registered. [ 31.107428] arm-memlat-mon soc:qcom,cpu4-cpugrp:qcom,cpu4-computemon: Compute governor registered. [ 31.117139] arm-memlat-mon soc:qcom,cpu4-cpugrp:qcom,cpu4-qoslatmon: Memory Latency governor registered. [ 31.128935] register_client_adhoc:find path.src 1 dest 627 [ 31.130104] register_client_adhoc:Client handle 44 soc:qcom,snoc_cnoc_keepalive [ 31.138425] register_client_adhoc:find path.src 1 dest 770 [ 31.146315] register_client_adhoc:Client handle 45 soc:qcom,cpu-cpu-llcc-bw [ 31.154883] register_client_adhoc:find path.src 129 dest 512 [ 31.162404] register_client_adhoc:Client handle 46 soc:qcom,cpu-llcc-ddr-bw [ 31.170612] register_client_adhoc:find path.src 154 dest 770 [ 31.178430] register_client_adhoc:Client handle 47 soc:qcom,npu-npu-llcc-bw [ 31.187137] register_client_adhoc:find path.src 770 dest 512 [ 31.194883] register_client_adhoc:Client handle 48 soc:qcom,npu-llcc-ddr-bw [ 31.203489] register_client_adhoc:find path.src 154 dest 512 [ 31.211757] register_client_adhoc:Client handle 49 soc:qcom,npudsp-npu-ddr-bw [ 31.220424] register_client_adhoc:find path.src 154 dest 512 [ 31.228867] register_client_adhoc:Client handle 51 soc:qcom,npu-npu-ddr-latfloor [ 31.236477] register_client_adhoc:find path.src 1 dest 770 [ 31.244447] register_client_adhoc:Client handle 50 soc:qcom,cpu0-cpu-llcc-lat [ 31.251882] register_client_adhoc:find path.src 1 dest 770 [ 31.259570] register_client_adhoc:Client handle 52 soc:qcom,cpu4-cpu-llcc-lat [ 31.267780] register_client_adhoc:find path.src 129 dest 512 [ 31.275509] register_client_adhoc:Client handle 53 soc:qcom,cpu0-llcc-ddr-lat [ 31.283939] register_client_adhoc:find path.src 129 dest 512 [ 31.291708] register_client_adhoc:Client handle 54 soc:qcom,cpu4-llcc-ddr-lat [ 31.300151] register_client_adhoc:find path.src 129 dest 512 [ 31.307840] register_client_adhoc:Client handle 55 soc:qcom,cpu4-cpu-ddr-latfloor [ 31.316938] register_client_adhoc:find path.src 26 dest 512 [ 31.325384] register_client_adhoc:Client handle 56 soc:qcom,gpubw [ 31.340446] qcom-llcc-pmu 9095000.llcc-pmu: Registered llcc_pmu, type: 10 [ 31.355371] coresight-tmc 6048000.tmc: Linked as a consumer to 15000000.apps-smmu [ 31.364192] iommu: Adding device 6048000.tmc to group 26 [ 31.374711] coresight-dynamic-funnel 6902000.funnel: Linked as a consumer to regulator.69 [ 31.383339] coresight-dynamic-funnel 6902000.funnel: Linked as a consumer to regulator.70 [ 31.403289] coresight-dynamic-funnel 6c44000.funnel: Linked as a consumer to regulator.79 [ 31.411888] coresight-dynamic-funnel 6c44000.funnel: Linked as a consumer to regulator.4 [ 31.428025] coresight-etm4x 7040000.etm: CPU0: ETM v0.4 initialized [ 31.434506] coresight-etm4x 7040000.etm: CPU0: (null) initialized [ 31.442080] coresight-etm4x 7140000.etm: CPU1: ETM v0.4 initialized [ 31.448555] coresight-etm4x 7140000.etm: CPU1: (null) initialized [ 31.456153] coresight-etm4x 7240000.etm: CPU2: ETM v0.4 initialized [ 31.462613] coresight-etm4x 7240000.etm: CPU2: (null) initialized [ 31.470230] coresight-etm4x 7340000.etm: CPU3: ETM v0.4 initialized [ 31.476690] coresight-etm4x 7340000.etm: CPU3: (null) initialized [ 31.484222] coresight-etm4x 7440000.etm: CPU4: ETM v0.4 initialized [ 31.490731] coresight-etm4x 7440000.etm: CPU4: (null) initialized [ 31.498333] coresight-etm4x 7540000.etm: CPU5: ETM v0.4 initialized [ 31.504793] coresight-etm4x 7540000.etm: CPU5: (null) initialized [ 31.512367] coresight-etm4x 7640000.etm: CPU6: ETM v0.4 initialized [ 31.518825] coresight-etm4x 7640000.etm: CPU6: (null) initialized [ 31.526411] coresight-etm4x 7740000.etm: CPU7: ETM v0.4 initialized [ 31.532885] coresight-etm4x 7740000.etm: CPU7: (null) initialized [ 31.541681] coresight-stm 6002000.stm: stm_register_device failed, probing deffered [ 31.549897] OF: graph: no port node found in /soc/cti@78e0000 [ 31.556275] OF: graph: no port node found in /soc/cti@78f0000 [ 31.562585] OF: graph: no port node found in /soc/cti@7900000 [ 31.568961] OF: graph: no port node found in /soc/cti@6e01000 [ 31.575293] OF: graph: no port node found in /soc/cti@6e02000 [ 31.581587] OF: graph: no port node found in /soc/cti@6e03000 [ 31.587973] OF: graph: no port node found in /soc/cti@6e0c000 [ 31.594353] OF: graph: no port node found in /soc/cti@6e0d000 [ 31.600652] OF: graph: no port node found in /soc/cti@6e0e000 [ 31.607012] OF: graph: no port node found in /soc/cti@6e11000 [ 31.613349] OF: graph: no port node found in /soc/cti@6e21000 [ 31.619675] OF: graph: no port node found in /soc/cti@6c09000 [ 31.626035] OF: graph: no port node found in /soc/cti@6c0a000 [ 31.632392] OF: graph: no port node found in /soc/cti@6c2a000 [ 31.638731] OF: graph: no port node found in /soc/cti@6c2b000 [ 31.645080] OF: graph: no port node found in /soc/cti@6c2c000 [ 31.651411] OF: graph: no port node found in /soc/cti@6010000 [ 31.657759] OF: graph: no port node found in /soc/cti@6011000 [ 31.664277] OF: graph: no port node found in /soc/cti@6012000 [ 31.670601] OF: graph: no port node found in /soc/cti@6013000 [ 31.676940] OF: graph: no port node found in /soc/cti@6014000 [ 31.683270] OF: graph: no port node found in /soc/cti@6015000 [ 31.689613] OF: graph: no port node found in /soc/cti@6016000 [ 31.695987] OF: graph: no port node found in /soc/cti@6017000 [ 31.702326] OF: graph: no port node found in /soc/cti@6018000 [ 31.708706] OF: graph: no port node found in /soc/cti@6019000 [ 31.715044] OF: graph: no port node found in /soc/cti@601a000 [ 31.721384] OF: graph: no port node found in /soc/cti@601b000 [ 31.727754] OF: graph: no port node found in /soc/cti@601c000 [ 31.734105] OF: graph: no port node found in /soc/cti@601d000 [ 31.740457] OF: graph: no port node found in /soc/cti@601e000 [ 31.746810] OF: graph: no port node found in /soc/cti@601f000 [ 31.753167] OF: graph: no port node found in /soc/cti@7020000 [ 31.759507] OF: graph: no port node found in /soc/cti@7120000 [ 31.765887] OF: graph: no port node found in /soc/cti@7220000 [ 31.772243] OF: graph: no port node found in /soc/cti@7320000 [ 31.778609] OF: graph: no port node found in /soc/cti@7420000 [ 31.784973] OF: graph: no port node found in /soc/cti@7520000 [ 31.791334] OF: graph: no port node found in /soc/cti@7620000 [ 31.797736] OF: graph: no port node found in /soc/cti@7720000 [ 31.804099] OF: graph: no port node found in /soc/cti@6831000 [ 31.810440] OF: graph: no port node found in /soc/cti@6845000 [ 31.816923] OF: graph: no port node found in /soc/cti@6c61000 [ 31.823294] OF: graph: no port node found in /soc/cti@6c42000 [ 31.829648] OF: graph: no port node found in /soc/cti@6c43000 [ 31.836040] OF: graph: no port node found in /soc/cti@6c4b000 [ 31.842398] OF: graph: no port node found in /soc/cti@6b00000 [ 31.848740] OF: graph: no port node found in /soc/cti@6b01000 [ 31.849804] i2c_geni 980000.i2c: i2c error :-107 [ 31.855113] OF: graph: no port node found in /soc/cti@6b02000 [ 31.859596] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x00 [ 31.865835] OF: graph: no port node found in /soc/cti@6b03000 [ 31.875465] i2c_geni 980000.i2c: i2c error :-107 [ 31.881399] OF: graph: no port node found in /soc/cti@6982000 [ 31.885743] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 31.892118] OF: graph: no port node found in /soc/cti@698b000 [ 31.907588] OF: graph: no port node found in /soc/cti@6c38000 [ 31.921744] coresight-tpdm 6900000.tpdm: Linked as a consumer to regulator.69 [ 31.929332] coresight-tpdm 6900000.tpdm: Linked as a consumer to regulator.70 [ 31.946641] coresight-tpdm 6c47000.tpdm: Linked as a consumer to regulator.79 [ 31.954196] coresight-tpdm 6c47000.tpdm: Linked as a consumer to regulator.4 [ 31.963238] coresight-tpdm 6c40000.tpdm: Linked as a consumer to regulator.79 [ 31.970729] coresight-tpdm 6c40000.tpdm: Linked as a consumer to regulator.4 [ 31.980046] coresight-tpdm 6c41000.tpdm: Linked as a consumer to regulator.79 [ 31.987550] coresight-tpdm 6c41000.tpdm: Linked as a consumer to regulator.4 [ 32.013139] OF: graph: no port node found in /soc/csr@6001000 [ 32.019317] coresight-csr 6001000.csr: CSR initialized: coresight-csr [ 32.026034] OF: graph: no port node found in /soc/csr@6b0c000 [ 32.032245] coresight-csr 6b0c000.csr: CSR initialized: coresight-swao-csr [ 32.040364] OF: graph: no port node found in /soc/hwevent [ 32.046202] coresight-hwevent soc:hwevent: Hardware Event driver initialized [ 32.054527] coresight-dummy soc:dummy_sink: Dummy device initialized [ 32.061773] coresight-dummy soc:tpdm@6b26000: Dummy device initialized [ 32.070163] coresight-remote-etm soc:turing_etm0: Remote ETM initialized [ 32.077883] coresight-remote-etm soc:audio_etm0: Remote ETM initialized [ 32.085504] coresight-remote-etm soc:ssc_etm0: Remote ETM initialized [ 32.093012] coresight-remote-etm soc:npu_etm0: Remote ETM initialized [ 32.100323] OF: graph: no port node found in /soc/tgu@6b0b000 [ 32.107550] BUG: key ffffffc945b1f040 not in .data! [ 32.112633] BUG: key ffffffc945b1d9c0 not in .data! [ 32.117681] BUG: key ffffffc945b1e8c0 not in .data! [ 32.124783] ext-mdm soc:qcom,mdm0: mdm_debug_gpio_show: MDM2AP_ERRFATAL gpio = 1101 [ 32.124787] ext-mdm soc:qcom,mdm0: mdm_debug_gpio_show: AP2MDM_ERRFATAL gpio = 1157 [ 32.124791] ext-mdm soc:qcom,mdm0: mdm_debug_gpio_show: MDM2AP_STATUS gpio = 1103 [ 32.124795] ext-mdm soc:qcom,mdm0: mdm_debug_gpio_show: AP2MDM_STATUS gpio = 1156 [ 32.124798] ext-mdm soc:qcom,mdm0: mdm_debug_gpio_show: AP2MDM_SOFT_RESET gpio = -1 [ 32.124802] ext-mdm soc:qcom,mdm0: mdm_debug_gpio_show: MDM2AP_WAKEUP gpio = -1 [ 32.124806] ext-mdm soc:qcom,mdm0: mdm_debug_gpio_show: AP2MDM_WAKEUP gpio = -1 [ 32.124809] ext-mdm soc:qcom,mdm0: mdm_debug_gpio_show: AP2MDM_PMIC_PWR_EN gpio = -1 [ 32.124814] ext-mdm soc:qcom,mdm0: mdm_debug_gpio_show: MDM2AP_PBLRDY gpio = -1 [ 32.124817] ext-mdm soc:qcom,mdm0: mdm_debug_gpio_show: AP2MDM_VDDMIN gpio = -1 [ 32.124820] ext-mdm soc:qcom,mdm0: mdm_debug_gpio_show: MDM2AP_VDDMIN gpio = -1 [ 32.125415] ext-mdm soc:qcom,mdm0: mdm_configure_ipc Failed to configure AP2MDM_ERRFATAL gpio [ 32.134214] ext-mdm soc:qcom,mdm0: mdm_configure_ipc Failed to configure MDM2AP_STATUS gpio [ 32.143399] ext-mdm soc:qcom,mdm0: esoc registration done [ 32.144871] mdm-4x esoc0: dbg engine initialized [ 32.146443] usbcore: registered new interface driver snd-usb-audio [ 32.153186] uaudio-qmi soc:usb_audio_qmi_dev: Linked as a consumer to 15000000.apps-smmu [ 32.161666] iommu: Adding device soc:usb_audio_qmi_dev to group 27 [ 32.172592] enter addr=0x68 [ 32.172634] a2b24xx_i2c_probe: AD2428 enable gpio value = 0 [ 32.181272] a2b24xx_i2c_probe: AD2428 enable gpio succuss, enable value = 1 [ 32.188480] a2b24xx 1-0068: No cache used with register defaults set! [ 32.197173] msm_vidc: err : ffffffff: .....: no device Registered [ 32.208243] msm_vidc_v4l2 aa00000.qcom,vidc:non_secure_cb: Linked as a consumer to 15000000.apps-smmu [ 32.218586] iommu: Adding device aa00000.qcom,vidc:non_secure_cb to group 28 [ 32.226841] msm_vidc_v4l2 aa00000.qcom,vidc:secure_non_pixel_cb: Linked as a consumer to 15000000.apps-smmu [ 32.237987] iommu: Adding device aa00000.qcom,vidc:secure_non_pixel_cb to group 29 [ 32.246809] msm_vidc_v4l2 aa00000.qcom,vidc:secure_bitstream_cb: Linked as a consumer to 15000000.apps-smmu [ 32.257889] iommu: Adding device aa00000.qcom,vidc:secure_bitstream_cb to group 30 [ 32.266653] msm_vidc_v4l2 aa00000.qcom,vidc:secure_pixel_cb: Linked as a consumer to 15000000.apps-smmu [ 32.277483] iommu: Adding device aa00000.qcom,vidc:secure_pixel_cb to group 31 [ 32.287333] register_client_adhoc:find path.src 1 dest 590 [ 32.288590] register_client_adhoc:Client handle 57 disp_rsc_reg [ 32.294393] register_client_adhoc:find path.src 20003 dest 20513 [ 32.301501] register_client_adhoc:find path.src 20004 dest 20513 [ 32.308677] register_client_adhoc:Client handle 58 disp_rsc_mnoc_llcc [ 32.314999] register_client_adhoc:find path.src 20000 dest 20512 [ 32.322063] register_client_adhoc:Client handle 59 disp_rsc_ebi [ 32.328604] sde_rsc af20000.qcom,sde_rscc: Linked as a consumer to regulator.78 [ 32.342514] [sde_rsc_hw:rsc_hw_init_v3:537]: sde rsc init successfully done [ 32.349869] [sde_rsc:sde_rsc_probe:1594]: sde rsc index:0 probed successfully [ 32.358418] dsi_phy ae94400.qcom,mdss_dsi_phy0: ae94400.qcom,mdss_dsi_phy0 supply gdsc not found, using dummy regulator [ 32.369660] dsi_phy ae94400.qcom,mdss_dsi_phy0: Linked as a consumer to regulator.0 [ 32.377686] dsi_phy ae94400.qcom,mdss_dsi_phy0: Linked as a consumer to regulator.13 [ 32.385693] [drm:dsi_phy_driver_probe] [msm-dsi-info]: DSI_0: Probe successful [ 32.393363] dsi_phy ae96400.qcom,mdss_dsi_phy1: ae96400.qcom,mdss_dsi_phy1 supply gdsc not found, using dummy regulator [ 32.404632] dsi_phy ae96400.qcom,mdss_dsi_phy1: Linked as a consumer to regulator.0 [ 32.412678] dsi_phy ae96400.qcom,mdss_dsi_phy1: Linked as a consumer to regulator.13 [ 32.420664] [drm:dsi_phy_driver_probe] [msm-dsi-info]: DSI_1: Probe successful [ 32.429746] drm_dsi_ctrl ae94000.qcom,mdss_dsi_ctrl0: Linked as a consumer to regulator.58 [ 32.438426] drm_dsi_ctrl ae94000.qcom,mdss_dsi_ctrl0: Linked as a consumer to regulator.18 [ 32.446942] AXI: get_pdata(): Error: Client name not found [ 32.452609] AXI: msm_bus_cl_get_pdata(): client has to provide missing entry for successful registration [ 32.462374] [drm:dsi_ctrl_dev_probe] [msm-dsi-info]: dsi-ctrl-0: Probe successful [ 32.470613] drm_dsi_ctrl ae96000.qcom,mdss_dsi_ctrl1: Linked as a consumer to regulator.58 [ 32.479307] drm_dsi_ctrl ae96000.qcom,mdss_dsi_ctrl1: Linked as a consumer to regulator.18 [ 32.487823] AXI: get_pdata(): Error: Client name not found [ 32.493488] AXI: msm_bus_cl_get_pdata(): client has to provide missing entry for successful registration [ 32.503237] [drm:dsi_ctrl_dev_probe] [msm-dsi-info]: dsi-ctrl-1: Probe successful [ 32.513860] msm-dsi-display soc:qcom,dsi-display-primary: Falling back to syfs fallback for: dsi_prop [ 32.525150] [drm] [msm-dsi-warn]: default panel not found [ 32.536547] synx: registered bind ops for cam_sync [ 32.542674] msm_cam_smmu soc:qcom,cam_smmu:msm_cam_smmu_ife: Linked as a consumer to 15000000.apps-smmu [ 32.553459] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_ife to group 32 [ 32.561968] msm_cam_smmu soc:qcom,cam_smmu:msm_cam_smmu_jpeg: Linked as a consumer to 15000000.apps-smmu [ 32.572725] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_jpeg to group 33 [ 32.580857] platform soc:qcom,cam_smmu:msm_cam_icp_fw: assigned reserved memory node pil_camera_region@86200000 [ 32.592443] msm_cam_smmu soc:qcom,cam_smmu:msm_cam_smmu_icp: Linked as a consumer to 15000000.apps-smmu [ 32.603136] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_icp to group 34 [ 32.611222] CAM_INFO: CAM-SMMU: cam_smmu_get_memory_regions_info: 3730 [icp] : Discard region specified [0xdff00000 0xe0200000] in [0x10c00000 0xfef00000] [ 32.626210] msm_cam_smmu soc:qcom,cam_smmu:msm_cam_smmu_cpas_cdm: Linked as a consumer to 15000000.apps-smmu [ 32.637275] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cpas_cdm to group 35 [ 32.646745] msm_cam_smmu soc:qcom,cam_smmu:msm_cam_smmu_fd: Linked as a consumer to 15000000.apps-smmu [ 32.657205] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_fd to group 36 [ 32.667166] cam-cpas ac40000.qcom,cam-cpas: Linked as a consumer to regulator.77 [ 32.677024] register_client_adhoc:find path.src 1 dest 589 [ 32.678229] register_client_adhoc:Client handle 60 cam_ahb [ 32.684158] register_client_adhoc:find path.src 170 dest 512 [ 32.691019] register_client_adhoc:Client handle 61 cam_hf_0_mnoc [ 32.697095] register_client_adhoc:find path.src 137 dest 512 [ 32.704440] register_client_adhoc:Client handle 62 cam_sf_0_mnoc [ 32.710529] register_client_adhoc:find path.src 171 dest 512 [ 32.717861] register_client_adhoc:Client handle 63 cam_sf_icp_mnoc [ 32.730551] msm_cam_cdm ac4d000.qcom,cpas-cdm0: Linked as a consumer to regulator.77 [ 32.749352] csid_17x acb5200.qcom,csid0: Linked as a consumer to regulator.77 [ 32.756895] csid_17x acb5200.qcom,csid0: Linked as a consumer to regulator.73 [ 32.765020] csid_17x acc4200.qcom,csid1: Linked as a consumer to regulator.77 [ 32.772587] csid_17x acc4200.qcom,csid1: Linked as a consumer to regulator.74 [ 32.781575] csid_lite acd9200.qcom,csid-lite0: Linked as a consumer to regulator.77 [ 32.790252] csid_lite acdb400.qcom,csid-lite1: Linked as a consumer to regulator.77 [ 32.799698] cam_vfe acb4000.qcom,ife0: Linked as a consumer to regulator.77 [ 32.807066] cam_vfe acb4000.qcom,ife0: Linked as a consumer to regulator.73 [ 32.817527] CAM_INFO: CAM-ISP: cam_vfe_bus_ver3_init_hw: 3649 Overriding clock gating at bus input [ 32.826791] CAM_INFO: CAM-ISP: cam_vfe_top_ver3_init_hw: 249 Disable clock gating at IFE top [ 32.837060] cam_vfe acc3000.qcom,ife1: Linked as a consumer to regulator.77 [ 32.844485] cam_vfe acc3000.qcom,ife1: Linked as a consumer to regulator.74 [ 32.854306] CAM_INFO: CAM-ISP: cam_vfe_bus_ver3_init_hw: 3649 Overriding clock gating at bus input [ 32.863527] CAM_INFO: CAM-ISP: cam_vfe_top_ver3_init_hw: 249 Disable clock gating at IFE top [ 32.873633] CAM_INFO: CAM-UTIL: cam_soc_util_get_option_clk_by_name: 559 No clk data for ife_dsp_clk [ 32.883032] CAM_WARN: CAM-ISP: cam_vfe_init_soc_resources: 154 Option clk get failed with rc -22 [ 32.892306] cam_vfe acd9000.qcom,ife-lite0: Linked as a consumer to regulator.77 [ 32.901744] CAM_INFO: CAM-ISP: cam_vfe_bus_ver3_init_hw: 3649 Overriding clock gating at bus input [ 32.910980] CAM_INFO: CAM-ISP: cam_vfe_top_ver3_init_hw: 249 Disable clock gating at IFE top [ 32.920865] CAM_INFO: CAM-UTIL: cam_soc_util_get_option_clk_by_name: 559 No clk data for ife_dsp_clk [ 32.930317] CAM_WARN: CAM-ISP: cam_vfe_init_soc_resources: 154 Option clk get failed with rc -22 [ 32.939557] cam_vfe acdb200.qcom,ife-lite1: Linked as a consumer to regulator.77 [ 32.948953] CAM_INFO: CAM-ISP: cam_vfe_bus_ver3_init_hw: 3649 Overriding clock gating at bus input [ 32.958172] CAM_INFO: CAM-ISP: cam_vfe_top_ver3_init_hw: 249 Disable clock gating at IFE top [ 32.969368] CAM_ERR: CAM-ISP: cam_isp_context_debug_register: 5353 failed to create dentry [ 32.977895] CAM_ERR: CAM-ISP: cam_isp_context_debug_register: 5353 failed to create dentry [ 32.986417] CAM_ERR: CAM-ISP: cam_isp_context_debug_register: 5353 failed to create dentry [ 32.994956] CAM_ERR: CAM-ISP: cam_isp_context_debug_register: 5353 failed to create dentry [ 33.003478] CAM_ERR: CAM-ISP: cam_isp_context_debug_register: 5353 failed to create dentry [ 33.012015] CAM_ERR: CAM-ISP: cam_isp_context_debug_register: 5353 failed to create dentry [ 33.020537] CAM_ERR: CAM-ISP: cam_isp_context_debug_register: 5353 failed to create dentry [ 33.029099] CAM_INFO: CAM-ISP: cam_isp_dev_probe: 167 Camera ISP probe complete [ 33.037737] CAM_INFO: CAM: cam_res_mgr_probe: 682 Disable shared gpio support. [ 33.047054] cam-cci-driver ac4f000.qcom,cci: Linked as a consumer to regulator.77 [ 33.062715] CAM_INFO: CAM-CCI: cam_cci_platform_probe: 454 Device Type :0 [ 33.070933] cam-cci-driver ac50000.qcom,cci: Linked as a consumer to regulator.77 [ 33.083982] CAM_INFO: CAM-CCI: cam_cci_platform_probe: 454 Device Type :1 [ 33.092176] cam-csiphy-driver ac6a000.qcom,csiphy: Linked as a consumer to regulator.77 [ 33.100629] cam-csiphy-driver ac6a000.qcom,csiphy: Linked as a consumer to regulator.58 [ 33.109453] cam-csiphy-driver ac6c000.qcom,csiphy: Linked as a consumer to regulator.77 [ 33.117873] cam-csiphy-driver ac6c000.qcom,csiphy: Linked as a consumer to regulator.58 [ 33.126571] cam-csiphy-driver ac6e000.qcom,csiphy: Linked as a consumer to regulator.77 [ 33.135044] cam-csiphy-driver ac6e000.qcom,csiphy: Linked as a consumer to regulator.58 [ 33.143798] cam-csiphy-driver ac70000.qcom,csiphy: Linked as a consumer to regulator.77 [ 33.152286] cam-csiphy-driver ac70000.qcom,csiphy: Linked as a consumer to regulator.58 [ 33.161032] cam-csiphy-driver ac72000.qcom,csiphy: Linked as a consumer to regulator.77 [ 33.169460] cam-csiphy-driver ac72000.qcom,csiphy: Linked as a consumer to regulator.58 [ 33.178182] cam-csiphy-driver ac74000.qcom,csiphy: Linked as a consumer to regulator.77 [ 33.186607] cam-csiphy-driver ac74000.qcom,csiphy: Linked as a consumer to regulator.58 [ 33.196453] CAM_INFO: CAM-ACTUATOR: cam_actuator_parse_dt: 60 No GPIO found [ 33.203734] CAM_INFO: CAM-ACTUATOR: cam_actuator_parse_dt: 60 No GPIO found [ 33.211042] CAM_INFO: CAM-ACTUATOR: cam_actuator_parse_dt: 60 No GPIO found [ 33.218326] CAM_INFO: CAM-ACTUATOR: cam_actuator_parse_dt: 60 No GPIO found [ 33.225632] CAM_INFO: CAM-ACTUATOR: cam_actuator_parse_dt: 60 No GPIO found [ 33.234693] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor0: Linked as a consumer to regulator.48 [ 33.244592] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor1: Linked as a consumer to regulator.48 [ 33.254487] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor4: Linked as a consumer to regulator.48 [ 33.264325] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor5: Linked as a consumer to regulator.48 [ 33.274246] qcom,camera ac50000.qcom,cci:qcom,cam-sensor2: Linked as a consumer to regulator.48 [ 33.284772] qcom,camera ac50000.qcom,cci:qcom,cam-sensor6: Linked as a consumer to regulator.48 [ 33.302237] CAM_WARN: CAM-ICP: cam_a5_get_dt_properties: 46 QoS need not be set [ 33.310002] cam-a5 ac00000.qcom,a5: Linked as a consumer to regulator.77 [ 33.318286] cam-ipe ac9a000.qcom,ipe0: Linked as a consumer to regulator.75 [ 33.326802] cam-bps ac7a000.qcom,bps: Linked as a consumer to regulator.72 [ 33.337894] cam-jpeg-enc ac53000.qcom,jpegenc: Linked as a consumer to regulator.77 [ 33.347096] cam-jpeg-dma ac57000.qcom,jpegdma: Linked as a consumer to regulator.77 [ 33.356787] CAM_INFO: CAM-JPEG: cam_jpeg_dev_probe: 164 Camera JPEG probe complete [ 33.365791] cam_fd_hw ac5f000.qcom,fd: Linked as a consumer to regulator.77 [ 33.382476] GACT probability NOT on [ 33.386125] Mirror/redirect action on [ 33.389959] netem: version 1.3 [ 33.393119] u32 classifier [ 33.395914] Actions configured [ 33.402234] xt_time: kernel timezone is -0000 [ 33.406799] gre: GRE over IPv4 demultiplexor driver [ 33.411833] IPv4 over IPsec tunneling driver [ 33.418054] Initializing XFRM netlink socket [ 33.422522] IPsec XFRM device driver [ 33.427884] NET: Registered protocol family 10 [ 33.435868] Segment Routing with IPv6 [ 33.440006] mip6: Mobile IPv6 [ 33.444578] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 33.452853] NET: Registered protocol family 17 [ 33.457464] NET: Registered protocol family 15 [ 33.462415] can: controller area network core (rev 20170425 abi 9) [ 33.469161] NET: Registered protocol family 29 [ 33.473761] can: raw protocol (rev 20170425) [ 33.478188] can: broadcast manager protocol (rev 20170425 t) [ 33.484033] can: netlink gateway (rev 20170425) max_hops=1 [ 33.490037] l2tp_core: L2TP core driver, V2.0 [ 33.494552] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 33.499510] l2tp_ip: L2TP IP encapsulation support (L2TPv3) [ 33.505492] l2tp_netlink: L2TP netlink interface [ 33.510330] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3) [ 33.516509] l2tp_debugfs: L2TP debugfs support [ 33.521094] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3) [ 33.527963] 8021q: 802.1Q VLAN Support v1.8 [ 33.532868] sctp: Hash tables configured (bind 32/46) [ 33.538773] Key type dns_resolver registered [ 33.546706] minidump-id not found for npu [ 33.551082] subsys-pil-tz 9800000.qcom,npu: for npu segments only will be dumped. [ 33.558990] subsys-pil-tz 9800000.qcom,npu: for md_npu segments only will be dumped. [ 33.570990] platform 3d6a000.qcom,gmu: Linked as a consumer to regulator.69 [ 33.578363] platform 3d6a000.qcom,gmu: Linked as a consumer to regulator.70 [ 33.587333] platform 3d6a000.qcom,gmu:gmu_user: Linked as a consumer to 3da0000.kgsl-smmu [ 33.595923] iommu: Adding device 3d6a000.qcom,gmu:gmu_user to group 37 [ 33.603666] NPU_WARN: npu_bridge_mbox_work: 1216 NPU fw is not loaded [ 33.611123] platform 3d6a000.qcom,gmu:gmu_kernel: Linked as a consumer to 3da0000.kgsl-smmu [ 33.619829] iommu: Adding device 3d6a000.qcom,gmu:gmu_kernel to group 38 [ 33.628767] register_client_adhoc:find path.src 26 dest 512 [ 33.629629] register_client_adhoc:Client handle 64 grp3d [ 33.635486] register_client_adhoc:find path.src 26 dest 10036 [ 33.641786] register_client_adhoc:Client handle 65 cnoc [ 33.647711] query_client_usecase_all: query_start [ 33.653127] query_client_usecase_all: query_start [ 33.658618] kgsl-3d 3d00000.qcom,kgsl-3d0: Linked as a consumer to regulator.69 [ 33.671251] kgsl-3d 3d00000.qcom,kgsl-3d0: Linked as a consumer to regulator.70 [ 33.681032] platform 3da0000.qcom,kgsl-iommu:gfx3d_user: Linked as a consumer to 3da0000.kgsl-smmu [ 33.690392] iommu: Adding device 3da0000.qcom,kgsl-iommu:gfx3d_user to group 39 [ 33.698878] platform 3da0000.qcom,kgsl-iommu:gfx3d_secure: Linked as a consumer to 3da0000.kgsl-smmu [ 33.708438] iommu: Adding device 3da0000.qcom,kgsl-iommu:gfx3d_secure to group 40 [ 33.779423] tmc_etr_bam_init: setting SPS_BAM_SMMU_EN flag with (6048000.tmc) [ 33.787655] sps:BAM 0x0000000006064000 is registered. [ 33.789545] coresight-stm 6002000.stm: STM32 initialized [ 33.800676] core_ctl: Creating CPU group 0 [ 33.804973] core_ctl: Init CPU0 state [ 33.808786] core_ctl: Init CPU1 state [ 33.812577] core_ctl: Init CPU2 state [ 33.816366] core_ctl: Init CPU3 state [ 33.820977] core_ctl: Creating CPU group 4 [ 33.825209] core_ctl: Init CPU4 state [ 33.829014] core_ctl: Init CPU5 state [ 33.832814] core_ctl: Init CPU6 state [ 33.837302] core_ctl: Creating CPU group 7 [ 33.841533] core_ctl: Init CPU7 state [ 33.846938] registered taskstats version 1 [ 33.851221] Loading compiled-in X.509 certificates [ 33.858670] cryptomgr_probe (426) used greatest stack depth: 13400 bytes left [ 33.859107] Loaded X.509 cert 'Build time autogenerated kernel key: d844d1515d289b0baf8e348933082d730a8d1de0' [ 33.879379] Key type ._fscrypt registered [ 33.883536] Key type .fscrypt registered [ 33.887600] Key type fscrypt-provisioning registered [ 33.930120] i2c_geni 980000.i2c: i2c error :-107 [ 33.935011] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x00 [ 33.945055] i2c_geni 980000.i2c: i2c error :-107 [ 33.950036] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 34.119579] spss_utils [spss_parse_dt]: iar_buf_addr [0x8bef0000]. [ 34.126342] spss_utils [spss_probe]: Initialization completed ok, firmware_name [spss2p]. [ 34.144351] fastrpc soc:qcom,msm-adsprpc-mem: for adsp_rh segments only will be dumped. [ 34.152877] adsprpc: init_secure_vmid_list: secure VMID = 22 [ 34.158768] adsprpc: init_secure_vmid_list: secure VMID = 37 [ 34.165172] adsprpc: fastrpc_probe: service location enabled for avs/audio (audio_pdr_adsprpc) [ 34.174117] adsprpc: fastrpc_probe: service location enabled for tms/servreg (sensors_pdr_adsprpc) [ 34.184056] fastrpc soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb1: Linked as a consumer to 15000000.apps-smmu [ 34.195614] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb1 to group 41 [ 34.205554] fastrpc soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb2: Linked as a consumer to 15000000.apps-smmu [ 34.217152] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb2 to group 42 [ 34.226496] Error: swapper/0: fastrpc_cb_probe: failed to create debugfs global file [ 34.235115] fastrpc soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb3: Linked as a consumer to 15000000.apps-smmu [ 34.246635] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb3 to group 43 [ 34.255967] Error: swapper/0: fastrpc_cb_probe: failed to create debugfs global file [ 34.264715] fastrpc soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb4: Linked as a consumer to 15000000.apps-smmu [ 34.276106] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb4 to group 44 [ 34.285405] Error: swapper/0: fastrpc_cb_probe: failed to create debugfs global file [ 34.293969] fastrpc soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb5: Linked as a consumer to 15000000.apps-smmu [ 34.305415] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb5 to group 45 [ 34.314762] Error: swapper/0: fastrpc_cb_probe: failed to create debugfs global file [ 34.323341] fastrpc soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb6: Linked as a consumer to 15000000.apps-smmu [ 34.334832] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb6 to group 46 [ 34.344142] Error: swapper/0: fastrpc_cb_probe: failed to create debugfs global file [ 34.352799] fastrpc soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb7: Linked as a consumer to 15000000.apps-smmu [ 34.364197] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb7 to group 47 [ 34.373576] Error: swapper/0: fastrpc_cb_probe: failed to create debugfs global file [ 34.382123] fastrpc soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb8: Linked as a consumer to 15000000.apps-smmu [ 34.393529] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb8 to group 48 [ 34.402930] Error: swapper/0: fastrpc_cb_probe: failed to create debugfs global file [ 34.412035] fastrpc soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb9: Linked as a consumer to 15000000.apps-smmu [ 34.423795] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb9 to group 49 [ 34.433128] Error: swapper/0: fastrpc_cb_probe: failed to create debugfs global file [ 34.441740] fastrpc soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb10: Linked as a consumer to 15000000.apps-smmu [ 34.453338] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb10 to group 50 [ 34.462736] Error: swapper/0: fastrpc_cb_probe: failed to create debugfs global file [ 34.471300] fastrpc soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb11: Linked as a consumer to 15000000.apps-smmu [ 34.482855] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb11 to group 51 [ 34.492290] Error: swapper/0: fastrpc_cb_probe: failed to create debugfs global file [ 34.500867] fastrpc soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb12: Linked as a consumer to 15000000.apps-smmu [ 34.512379] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb12 to group 52 [ 34.521770] Error: swapper/0: fastrpc_cb_probe: failed to create debugfs global file [ 34.530369] fastrpc soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb13: Linked as a consumer to 15000000.apps-smmu [ 34.542205] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb13 to group 53 [ 34.551617] Error: swapper/0: fastrpc_cb_probe: failed to create debugfs global file [ 34.560178] fastrpc soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb14: Linked as a consumer to 15000000.apps-smmu [ 34.571763] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb14 to group 54 [ 34.581181] Error: swapper/0: fastrpc_cb_probe: failed to create debugfs global file [ 34.589810] fastrpc soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb15: Linked as a consumer to 15000000.apps-smmu [ 34.601293] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb15 to group 55 [ 34.610728] Error: swapper/0: fastrpc_cb_probe: failed to create debugfs global file [ 34.620114] adsprpc: fastrpc_device_init: SSR notifier registered for adsp [ 34.627199] adsprpc: fastrpc_device_init: SSR notifier registered for modem [ 34.634410] adsprpc: fastrpc_device_init: SSR notifier registered for slpi [ 34.641488] adsprpc: fastrpc_device_init: SSR notifier registered for cdsp [ 34.649726] ngd_msm_ctrl 3ac0000.slim: Linked as a consumer to 15000000.apps-smmu [ 34.658423] iommu: Adding device 3ac0000.slim to group 56 [ 34.670677] input: gpio-keys as /devices/platform/soc/soc:gpio_keys/input/input2 [ 34.681637] [NVT-ts] nvt_driver_init 1962: start [ 34.686469] [NVT-ts] nvt_driver_init 1970: finished [ 34.708177] rmnet_ipa3 started initialization [ 34.716156] RNDIS_IPA module is loaded. [ 34.720791] [drm:dp_display_init_aux_switch][msm-dp-err][1 ]failed to register notifier (-22) [ 34.730900] msm notifier probed successfully [ 34.736743] [drm:dp_display_init_aux_switch][msm-dp-err][435 ]failed to register notifier (-22) [ 34.752720] CAM_ERR: CAM-CCI: cam_cci_assign_fops: 528 Invalid dev node:0000000000000000 offset: 0 [ 34.762068] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 34.772168] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 34.779595] cam_cc_sleep_clk_src: CXO configuration failed [ 34.786475] msm_bus_late_init: Remove handoff bw requests [ 34.792575] qcom_rpmh DRV:apps_rsc TCS Busy, retrying RPMH message send: addr=0x50074 [ 34.801594] regulator_proxy_consumer_remove_all: removing regulator proxy consumer requests [ 34.811774] ALSA device list: [ 34.814867] No soundcards found. [ 34.837071] Freeing unused kernel memory: 9344K [ 34.841933] Run /init as init process [ 34.850992] init: init first stage started! [ 34.855579] init: Unable to open /lib/modules, skipping module loading. [ 34.863584] init: [libfs_mgr]dt_fstab: Skip disabled entry for partition vendor [ 34.871175] init: [libfs_mgr]ReadFstabFromDt(): failed to read fstab from dt [ 34.878847] init: [libfs_mgr]dt_fstab: Skip disabled entry for partition vendor [ 34.888156] init: Using Android DT directory /proc/device-tree/firmware/android/ [ 35.130150] init: [libfs_mgr]superblock s_max_mnt_count:65535,/dev/block/by-name/metadata [ 35.138720] init: [libfs_mgr]check_fs(): mount(/dev/block/by-name/metadata,/metadata,ext4)=-1: No such file or directory [ 35.150040] init: [libfs_mgr]Running /system/bin/e2fsck on /dev/block/sda11 [ 35.159080] logwrapper: Cannot log to file /dev/fscklogs/log [ 35.172182] e2fsck: e2fsck 1.45.4 (23-Sep-2019) [ 35.187785] e2fsck: Pass 1: Checking inodes, blocks, and sizes [ 35.194743] e2fsck: Pass 2: Checking directory structure [ 35.203269] e2fsck: Pass 3: Checking directory connectivity [ 35.209045] e2fsck: Pass 4: Checking reference counts [ 35.214268] e2fsck: Pass 5: Checking group summary information [ 35.216735] e2fsck (458) used greatest stack depth: 11552 bytes left [ 35.220300] e2fsck: /dev/block/by-name/metadata: 37/4096 files (0.0% non-contiguous), 1201/4096 blocks [ 35.228922] EXT4-fs (sda11): mounted filesystem with ordered data mode. Opts: discard [ 35.280236] device-mapper: verity: sha256 using implementation "sha256-ce" [ 35.315522] EXT4-fs (dm-5): mounting with "discard" option, but the device does not support discard [ 35.324839] EXT4-fs (dm-5): mounted filesystem without journal. Opts: barrier=1,discard [ 35.353997] device-mapper: verity: sha256 using implementation "sha256-ce" [ 35.385937] EXT4-fs (dm-6): mounting with "discard" option, but the device does not support discard [ 35.395261] EXT4-fs (dm-6): mounted filesystem without journal. Opts: barrier=1,discard [ 35.407505] device-mapper: verity: sha256 using implementation "sha256-ce" [ 35.432217] EXT4-fs (dm-7): mounting with "discard" option, but the device does not support discard [ 35.441536] EXT4-fs (dm-7): mounted filesystem without journal. Opts: barrier=1,discard [ 35.453444] device-mapper: verity: sha1 using implementation "sha1-ce" [ 35.486456] EXT4-fs (dm-8): mounting with "discard" option, but the device does not support discard [ 35.495777] EXT4-fs (dm-8): mounted filesystem without journal. Opts: barrier=1,discard [ 35.507575] device-mapper: verity: sha1 using implementation "sha1-ce" [ 35.527400] EXT4-fs (dm-9): mounting with "discard" option, but the device does not support discard [ 35.536715] EXT4-fs (dm-9): mounted filesystem without journal. Opts: barrier=1,discard [ 35.591815] init: 34 output lines suppressed due to ratelimiting [ 35.977436] i2c_geni 980000.i2c: i2c error :-107 [ 35.982628] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x00 [ 35.992764] i2c_geni 980000.i2c: i2c error :-107 [ 35.997632] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 36.004415] init: [libfs_mgr]dt_fstab: Skip disabled entry for partition vendor [ 36.036111] init: Opening SELinux policy [ 36.052330] init: /system/etc/selinux/plat_sepolicy_and_mapping.sha256 and /odm/etc/selinux/precompiled_sepolicy.plat_sepolicy_and_mapping.sha256 differ [ 36.066374] init: Compiling SELinux policy [ 37.557249] secilc (481) used greatest stack depth: 10584 bytes left [ 37.557287] init: /system/bin/secilc: linker: Warning: failed to find generated linker configuration from "/linkerconfig/ld.config.txt" [ 37.576370] init: /system/bin/secilc: WARNING: linker: Warning: failed to find generated linker configuration from "/linkerconfig/ld.config.txt" [ 37.594464] init: Loading SELinux policy [ 37.969462] SELinux: policy capability network_peer_controls=1 [ 37.975650] SELinux: policy capability open_perms=1 [ 37.980769] SELinux: policy capability extended_socket_class=1 [ 37.986929] SELinux: policy capability always_check_network=0 [ 37.992982] SELinux: policy capability cgroup_seclabel=0 [ 37.998549] SELinux: policy capability nnp_nosuid_transition=1 [ 38.025363] i2c_geni 980000.i2c: i2c error :-107 [ 38.030247] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x00 [ 38.040355] i2c_geni 980000.i2c: i2c error :-107 [ 38.045209] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 38.328435] audit: type=1403 audit(11189.983:2): auid=4294967295 ses=4294967295 lsm=selinux res=1 [ 38.337695] audit: type=1404 audit(11189.987:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 enabled=1 old-enabled=1 lsm=selinux res=1 [ 38.349605] selinux: SELinux: Loaded file_contexts [ 38.356399] selinux: [ 38.389373] init: init second stage started! [ 38.469771] init: Using Android DT directory /proc/device-tree/firmware/android/ [ 38.478827] init: Init cannot set 'ro.boot.btmac' to '\x18s+\xa3\x05t\xc8\xf5': Value is not a UTF8 encoded string [ 38.496654] init: Overriding previous property 'persist.sys.usb.config':'adb' with new value 'none' [ 38.511842] init: Do not have permissions to set 'persist.backup.ntpServer' to '0.pool.ntp.org' in property file '/vendor/build.prop': SELinux permission check failed [ 38.527222] init: Overriding previous property 'dalvik.vm.heapsize':'36m' with new value '512m' [ 38.536608] init: Do not have permissions to set 'persist.vendor.bt.a2dp_offload_cap' to 'sbc-aptx-aptxtws-aptxhd-aac-ldac' in property file '/vendor/build.prop': SELinux permission check failed [ 38.554997] init: Do not have permissions to set 'vendor.mm.enable.qcom_parser' to '16777215' in property file '/vendor/build.prop': SELinux permission check failed [ 38.570386] init: Do not have permissions to set 'persist.demo.hdmirotationlock' to 'false' in property file '/vendor/build.prop': SELinux permission check failed [ 38.588471] init: Couldn't load property file '/vendor_dlkm/etc/build.prop': open() failed: No such file or directory: No such file or directory [ 38.724382] audit: type=1107 audit(11190.379:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=u:r:init:s0 msg='avc: denied { read } for property=persist.debug.trace pid=0 uid=0 gid=0 scontext=u:r:vendor_init:s0 tcontext=u:object_r:persist_debug_prop:s0 tclass=file permissive=0' [ 39.128353] linkerconfig (484) used greatest stack depth: 10368 bytes left [ 39.195774] ueventd: ueventd started! [ 39.202878] selinux: SELinux: Loaded file_contexts [ 39.207844] selinux: [ 39.210505] ueventd: Parsing file /system/etc/ueventd.rc... [ 39.217406] ueventd: Added '/vendor/etc/ueventd.rc' to import list [ 39.223788] ueventd: Added '/odm/etc/ueventd.rc' to import list [ 39.230120] ueventd: Parsing file /vendor/etc/ueventd.rc... [ 39.235917] ueventd: Unable to read config file '/vendor/etc/ueventd.rc': open() failed: No such file or directory [ 39.246618] ueventd: Parsing file /odm/etc/ueventd.rc... [ 39.252135] ueventd: Unable to read config file '/odm/etc/ueventd.rc': open() failed: No such file or directory [ 39.523611] boringssl_self_ (487) used greatest stack depth: 10272 bytes left [ 39.609824] is_dc_online: 3 callbacks suppressed [ 39.609827] HL6111R: is_dc_online: DC psy unavailable [ 39.619866] HL6111R: is_dc_online: DC psy unavailable [ 39.625123] HL6111R: is_dc_online: DC psy unavailable [ 39.630347] HL6111R: is_dc_online: DC psy unavailable [ 39.635920] HL6111R: is_dc_online: DC psy unavailable [ 39.641156] HL6111R: is_dc_online: DC psy unavailable [ 39.646402] HL6111R: is_dc_online: DC psy unavailable [ 39.651626] HL6111R: is_dc_online: DC psy unavailable [ 39.656848] HL6111R: is_dc_online: DC psy unavailable [ 39.662070] HL6111R: is_dc_online: DC psy unavailable [ 39.701256] audit: type=1400 audit(11191.359:5): avc: denied { mounton } for pid=1 comm="init" path="/sys/kernel/tracing" dev="tracefs" ino=1 scontext=u:r:init:s0 tcontext=u:object_r:debugfs_tracing_debug:s0 tclass=dir permissive=0 [ 39.829178] msm_11ad soc:qcom,wil6210: GPIO not found, dc GPIO not used [ 39.837460] msm_11ad soc:qcom,wil6210: GPIO not found, enable GPIO not used [ 39.846095] msm_11ad soc:qcom,wil6210: GPIO not found, sleep clock not used [ 39.855216] msm_11ad soc:qcom,wil6210: soc:qcom,wil6210 supply vdd not found, using dummy regulator [ 39.864958] msm_11ad soc:qcom,wil6210: Linked as a consumer to regulator.0 [ 39.872346] msm_11ad soc:qcom,wil6210: Linked as a consumer to regulator.8 [ 39.879704] msm_11ad soc:qcom,wil6210: Linked as a consumer to regulator.26 [ 39.887763] msm_pcie_enumerate: PCIe: RC1: has already been enumerated. [ 39.894640] msm_11ad soc:qcom,wil6210: Wigig device not found [ 39.900893] msm_11ad soc:qcom,wil6210: Dropping the link to regulator.26 [ 39.907936] msm_11ad soc:qcom,wil6210: Dropping the link to regulator.0 [ 39.915057] msm_11ad soc:qcom,wil6210: Dropping the link to regulator.8 [ 39.985622] q6_pdr_dlkm: loading out-of-tree module taints kernel. [ 40.006088] apr_dlkm: no symbol version for snd_event_notify [ 40.018444] [drm:dp_display_init_aux_switch][msm-dp-err][62 ]failed to register notifier (-22) [ 40.030812] [drm:dp_display_init_aux_switch][msm-dp-err][54 ]failed to register notifier (-22) [ 40.073556] i2c_geni 980000.i2c: i2c error :-107 [ 40.088526] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x00 [ 40.156479] i2c_geni 980000.i2c: i2c error :-107 [ 40.168581] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 40.171031] [ 40.179822] ********************************************************** [ 40.186614] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 40.193373] ** ** [ 40.200165] ** trace_printk() being used. Allocating extra memory. ** [ 40.206896] ** ** [ 40.213624] ** This means that this is a DEBUG kernel and it is ** [ 40.220379] ** unsafe for production use. ** [ 40.227107] ** ** [ 40.233832] ** If you see this message and you are not debugging ** [ 40.240562] ** the kernel, report this immediately to your vendor! ** [ 40.247290] ** ** [ 40.254016] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 40.261032] ********************************************************** [ 40.305693] [drm:dp_display_init_aux_switch][msm-dp-err][77 ]failed to register notifier (-22) [ 40.375608] [drm:dp_display_init_aux_switch][msm-dp-err][503 ]failed to register notifier (-22) [ 40.388523] [drm:dp_display_init_aux_switch][msm-dp-err][492 ]failed to register notifier (-22) [ 40.400560] [drm:dp_display_init_aux_switch][msm-dp-err][54 ]failed to register notifier (-22) [ 40.411115] [drm:dp_display_init_aux_switch][msm-dp-err][54 ]failed to register notifier (-22) [ 40.427475] [drm:dp_display_init_aux_switch][msm-dp-err][492 ]failed to register notifier (-22) [ 40.442651] [drm:dp_display_init_aux_switch][msm-dp-err][54 ]failed to register notifier (-22) [ 40.453450] [drm:dp_display_init_aux_switch][msm-dp-err][54 ]failed to register notifier (-22) [ 40.464127] [drm:dp_display_init_aux_switch][msm-dp-err][54 ]failed to register notifier (-22) [ 40.474868] [drm:dp_display_init_aux_switch][msm-dp-err][54 ]failed to register notifier (-22) [ 40.485541] [drm:dp_display_init_aux_switch][msm-dp-err][54 ]failed to register notifier (-22) [ 40.496319] [drm:dp_display_init_aux_switch][msm-dp-err][54 ]failed to register notifier (-22) [ 40.507135] [drm:dp_display_init_aux_switch][msm-dp-err][54 ]failed to register notifier (-22) [ 40.519116] [drm:dp_display_init_aux_switch][msm-dp-err][54 ]failed to register notifier (-22) [ 40.567421] [drm:dp_display_init_aux_switch][msm-dp-err][46 ]failed to register notifier (-22) [ 40.579495] [drm:dp_display_init_aux_switch][msm-dp-err][46 ]failed to register notifier (-22) [ 40.579771] kona-pinctrl f000000.pinctrl: invalid function func2 in map table [ 40.595843] kona-pinctrl f000000.pinctrl: invalid function func2 in map table [ 40.603605] kona-pinctrl f000000.pinctrl: invalid function func2 in map table [ 40.610974] kona-pinctrl f000000.pinctrl: invalid function func2 in map table [ 40.618650] [drm:dp_display_init_aux_switch][msm-dp-err][46 ]failed to register notifier (-22) [ 40.630646] [drm:dp_display_init_aux_switch][msm-dp-err][46 ]failed to register notifier (-22) [ 40.699306] [drm:dp_display_init_aux_switch][msm-dp-err][54 ]failed to register notifier (-22) [ 40.711521] [drm:dp_display_init_aux_switch][msm-dp-err][54 ]failed to register notifier (-22) [ 40.949662] Trying to create more than 6 SchedTune boosting groups [ 40.956680] Trying to create more than 6 SchedTune boosting groups [ 41.005343] Registered swp emulation handler [ 41.070365] logd.auditd: start [ 41.073635] logd.klogd: 41065370920 [ 41.087755] binder: 516:516 ioctl 40046210 7fe38175a4 returned -22 [ 41.116725] binder: 517:517 ioctl 40046210 7fe599d5d4 returned -22 [ 41.164548] binder: 515:515 ioctl 40046210 7fd2f209e4 returned -22 [ 41.364994] init: wait for '/dev/block/platform/soc/1d84000.ufshc' took 0ms [ 41.712176] init: wait for '/dev/qseecom' took 0ms [ 41.783289] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: barrier=1 [ 41.796847] FAT-fs (sde51): bogus number of reserved sectors [ 41.802851] FAT-fs (sde51): Can't find a valid FAT filesystem [ 41.834824] type=1400 audit(11193.491:6): avc: denied { read write } for comm="fsck_msdos" name="sde51" dev="tmpfs" ino=1714 scontext=u:r:fsck:s0 tcontext=u:object_r:block_device:s0 tclass=blk_file permissive=0 [ 41.849554] fsck_msdos: ** /dev/block/bootdevice/by-name/spunvm [ 41.854408] type=1400 audit(11193.491:7): avc: denied { read } for comm="fsck_msdos" name="sde51" dev="tmpfs" ino=1714 scontext=u:r:fsck:s0 tcontext=u:object_r:block_device:s0 tclass=blk_file permissive=0 [ 41.860324] fsck_msdos: Can't open `/dev/block/bootdevice/by-name/spunvm' [ 41.866998] binder: 562:562 ioctl 40046210 7fcef22f84 returned -22 [ 41.867257] binder: 562:562 ioctl 40046210 7fcef22f24 returned -22 [ 41.879039] type=1400 audit(11193.491:8): avc: denied { kill } for comm="fsck_msdos" capability=5 scontext=u:r:fsck:s0 tcontext=u:r:fsck:s0 tclass=capability permissive=0 [ 41.886653] fsck_msdos: fsck_msdos terminated by exit(8)\x0a [ 41.926583] FAT-fs (sde51): bogus number of reserved sectors [ 41.932489] FAT-fs (sde51): Can't find a valid FAT filesystem [ 41.952531] EXT4-fs (sde9): mounted filesystem with ordered data mode. Opts: barrier=1 [ 42.030343] binder: 584:584 ioctl 40046210 7ff6393da4 returned -22 [ 42.036896] ProcessState: Binder ioctl to enable oneway spam detection failed: Invalid argument [ 42.037989] vdc: Waited 0ms for vold [ 42.094714] subsys-pil-tz soc:qcom,ipa_fws: Falling back to syfs fallback for: ipa_fws.mdt [ 42.105627] init: wait for '/mnt/vendor/spunvm' took 0ms [ 42.181372] SW_INIT_DONE - 2nd phase loading [spss] completed ok [ 42.185803] binder: 587:587 ioctl 40046210 7ffb63f014 returned -22 [ 42.188861] PBL_DONE - 1st phase loading [spss] completed ok [ 42.195447] binder: 587:587 ioctl 40046210 7ffb63ef54 returned -22 [ 42.202049] i2c_geni 980000.i2c: i2c error :-107 [ 42.209532] [drm:dp_display_init_aux_switch][msm-dp-err][492 ]failed to register notifier (-22) [ 42.211565] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x00 [ 42.233708] i2c_geni 980000.i2c: i2c error :-107 [ 42.238641] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 42.297567] subsys-pil-tz soc:qcom,ipa_fws: ipa_fws: loading from 0x0000000086810000 to 0x0000000086819000 [ 42.312154] subsys-pil-tz soc:qcom,ipa_fws: Falling back to syfs fallback for: ipa_fws.b02 [ 42.312402] subsys-pil-tz soc:qcom,ipa_fws: Falling back to syfs fallback for: ipa_fws.b03 [ 42.325974] subsys-pil-tz soc:qcom,ipa_fws: Falling back to syfs fallback for: ipa_fws.b04 [ 42.343307] binder: 588:588 ioctl 40046210 7fd9a2a7f4 returned -22 [ 42.352964] wait_for_keymaster: Waiting for Keymaster device [ 42.358237] subsys-pil-tz soc:qcom,ipa_fws: ipa_fws: Brought out of reset [ 42.358837] binder: 588:588 ioctl 40046210 7fd9a29d54 returned -22 [ 42.359188] binder: 598:598 ioctl 40046210 7fcf05f3f4 returned -22 [ 42.359205] ProcessState: Binder ioctl to enable oneway spam detection failed: Invalid argument [ 42.366844] IPA FW loaded successfully [ 42.390413] gsi soc:qcom,msm_gsi: gsi_register_device:1203 GSI irq is wake enabled 34 [ 42.425781] rmnet_ipa3 started initialization [ 42.432378] IPA driver initialization was successful. [ 42.432525] IPA SSR support = True [ 42.437770] subsys-pil-tz soc:qcom,ipa_uc: Falling back to syfs fallback for: ipa_uc.mdt [ 42.441114] IPA SG support = True [ 42.441119] IPA Napi Enable = True [ 42.441123] using default for wan-rx-desc-size = 256 [ 42.453357] ipa-wan ipa3_wwan_probe:2530 rmnet_ipa completed initialization [ 42.467955] subsys-pil-tz soc:qcom,ipa_uc: ipa_uc: loading from 0x0000000086800000 to 0x0000000086810000 [ 42.480757] subsys-pil-tz soc:qcom,ipa_uc: Falling back to syfs fallback for: ipa_uc.b02 [ 42.499455] subsys-pil-tz soc:qcom,ipa_uc: ipa_uc: Brought out of reset [ 42.500003] ipa ipa3_uc_wdi_event_log_info_handler:351 WDI protocol missing 0x21 [ 42.514195] ipa ipa3_uc_ntn_event_log_info_handler:34 NTN stats ofst=0x500e0 [ 43.360802] ServiceManager: Waited one second for android.system.keystore2.IKeystoreService/default (is service started? are binder threads started and available?) [ 43.377623] wait_for_keymaster: Keymaster device ready [ 43.388715] binder: undelivered transaction 224, process died. [ 43.417043] binder: 626:626 ioctl 40046210 7fc34a1c14 returned -22 [ 43.423546] ProcessState: Binder ioctl to enable oneway spam detection failed: Invalid argument [ 43.424546] vdc: Waited 0ms for vold [ 43.433658] type=1400 audit(11195.091:9): avc: denied { kill } for comm="vdc" capability=5 scontext=u:r:vdc:s0 tcontext=u:r:vdc:s0 tclass=capability permissive=0 [ 43.435897] init: [libfs_mgr]Invalid f2fs superblock on '/dev/block/bootdevice/by-name/userdata' [ 43.457813] init: [libfs_mgr]mount_with_alternatives(): skipping mount due to invalid magic, mountpoint=/data blk_dev=/dev/block/sda15 rec[6].fs_type=f2fs [ 43.473074] init: Calling: /system/bin/vdc cryptfs mountFstab /dev/block/bootdevice/by-name/userdata /data [ 43.506350] binder: 627:627 ioctl 40046210 7fed8b3c54 returned -22 [ 43.512841] ProcessState: Binder ioctl to enable oneway spam detection failed: Invalid argument [ 43.513572] vdc: Waited 0ms for vold [ 43.566633] fsck.f2fs: Info: Fix the reported corruption. [ 43.572343] fsck.f2fs: \x09Info: No support kernel version! [ 43.577872] type=1400 audit(11195.235:10): avc: denied { kill } for comm="fsck.f2fs" capability=5 scontext=u:r:fsck:s0 tcontext=u:r:fsck:s0 tclass=capability permissive=0 [ 43.577877] fsck.f2fs: Info: Segments per section = 1 [ 43.598833] fsck.f2fs: Info: Sections per zone = 1 [ 43.603816] fsck.f2fs: Info: sector size = 4096 [ 43.608517] fsck.f2fs: Info: total sectors = 28958163 (113117 MB) [ 43.614820] fsck.f2fs: Info: MKFS version [ 43.618983] fsck.f2fs: "4.15.0-175-generic #184-Ubuntu SMP Thu Mar 24 17:48:36 UTC 2022" [ 43.627510] fsck.f2fs: Info: FSCK version [ 43.631674] fsck.f2fs: from "4.19.157+" [ 43.645012] F2FS-fs (dm-10): Reduce reserved blocks for root = 22993 [ 43.834400] F2FS-fs (dm-10): Mounted with checkpoint version = 117ea213 [ 43.846505] type=1400 audit(11195.503:11): avc: denied { kill } for comm="vdc" capability=5 scontext=u:r:vdc:s0 tcontext=u:r:vdc:s0 tclass=capability permissive=0 [ 43.863675] init: Userdata mounted using /vendor/etc/fstab.qcom result : 7 [ 43.870999] init: Keyring created with id 848002012 in process 1 [ 43.877990] init: Command 'mount_all /vendor/etc/fstab.qcom --late' action=late-fs (/vendor/etc/init/hw/init.target.rc:69) took 488ms and succeeded [ 43.893617] init: processing action (late-fs) from (/vendor/etc/init/keymasterd.rc:5) [ 43.902214] init: starting service 'vendor.keymasterd'... [ 43.916970] init: processing action (post-fs-data) from (/system/etc/init/hw/init.rc:633) [ 43.925718] init: starting service 'exec 10 (/system/bin/vdc checkpoint prepareCheckpoint)'... [ 43.959876] binder: 634:634 ioctl 40046210 7fe5074f24 returned -22 [ 43.966390] ProcessState: Binder ioctl to enable oneway spam detection failed: Invalid argument [ 43.967344] vdc: Waited 0ms for vold [ 44.002031] binder: 636:636 ioctl 40046210 7fff3dd0f4 returned -22 [ 44.008603] ProcessState: Binder ioctl to enable oneway spam detection failed: Invalid argument [ 44.009305] vdc: Waited 0ms for vold [ 44.066827] fscrypt: AES-256-CTS-CBC using implementation "cts(cbc-aes-ce)" [ 44.127050] binder: 645:645 ioctl 40046210 7fdbadcbd4 returned -22 [ 44.133692] ProcessState: Binder ioctl to enable oneway spam detection failed: Invalid argument [ 44.134385] vdc: Waited 0ms for vold [ 44.198023] apexd: This device does not support updatable APEX. Exiting [ 44.204969] apexd: Marking APEXd as activated [ 44.265081] i2c_geni 980000.i2c: i2c error :-107 [ 44.269883] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x00 [ 44.279936] i2c_geni 980000.i2c: i2c error :-107 [ 44.284763] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 44.365514] binder: 651:651 ioctl 40046210 7ff94c5ae4 returned -22 [ 44.372087] ProcessState: Binder ioctl to enable oneway spam detection failed: Invalid argument [ 44.372988] vdc: Waited 0ms for vold [ 44.623204] apexd: This device does not support updatable APEX. Exiting [ 44.630265] apexd: Marking APEXd as ready [ 44.726021] cnss: File system is ready, fs_ready is 1, count is 1 [ 44.726107] cnss: Posting event: COLD_BOOT_CAL_START(5), state: 0x0 flags: 0x0 [ 44.726123] cnss: PM stay awake, state: 0x0, count: 1 [ 44.726855] cnss: PM relax, state: 0x0, count: 0 [ 44.726913] cnss: PM stay awake, state: 0x0, count: 1 [ 44.726993] cnss: Processing driver event: COLD_BOOT_CAL_START(5), state: 0x0 [ 44.727002] cnss: Regulator vdd-wlan-io is being enabled [ 44.727017] cnss: Regulator wlan-ant-switch is being enabled [ 44.727713] cnss: Regulator vdd-wlan-aon is being enabled [ 44.727910] cnss: Regulator vdd-wlan-dig is being enabled [ 44.728773] cnss: Regulator vdd-wlan-rfa1 is being enabled [ 44.728983] cnss: Regulator vdd-wlan-rfa2 is being enabled [ 44.729249] cnss: BT_EN_GPIO State: Off. Delay WLAN_GPIO enable [ 44.833403] cnss: Assert WLAN_EN GPIO successfully [ 44.833419] cnss: Resuming PCI link [ 44.833673] msm_pcie_enable: PCIe: Assert the reset of endpoint of RC0. [ 44.848003] msm_pcie_enable: PCIe: RC0: PCIE20_PARF_INT_ALL_MASK: 0x7f80d202 [ 44.857993] pcie_phy_init: PCIe RC0 PHY is ready! [ 44.873521] msm_pcie_enable: PCIe: Release the reset of endpoint of RC0. [ 44.900363] msm_pcie_link_train: PCIe RC0 link initialized [ 44.922189] logd: logd reinit [ 44.927182] logd: FrameworkListener: read() failed (Connection reset by peer) [ 44.932330] cnss_pci 0000:01:00.0: enabling device (0000 -> 0002) [ 44.941310] cnss: Read register offset 0x1f8031c, val = 0x6 [ 44.941326] cnss: Write val 0x2 to register offset 0x1f8031c [ 44.941333] cnss: Setting MHI state: INIT(0) [ 44.960108] cnss: Setting MHI state: POWER_ON(2) [ 44.963662] cnss_pci 0000:01:00.0: Falling back to syfs fallback for: qca6390/amss20.bin [ 44.979830] ueventd: firmware: loading 'qca6390/amss20.bin' for '/devices/platform/soc/1c00000.qcom,pcie/pci0000:00/0000:00:00.0/0000:01:00.0/firmware/qca6390!amss20.bin' [ 45.017190] ueventd: loading /devices/platform/soc/1c00000.qcom,pcie/pci0000:00/0000:00:00.0/0000:01:00.0/firmware/qca6390!amss20.bin took 37ms [ 45.294748] update_verifier: Started with arg 1: nonencrypted [ 45.301181] binder: 684:684 ioctl 40046210 7ff916a444 returned -22 [ 45.307638] hw-ProcessState: Binder ioctl to enable oneway spam detection failed: Invalid argument [ 45.311883] update_verifier: Booting slot 0: isSlotMarkedSuccessful=1 [ 45.318665] update_verifier: Leaving update_verifier. [ 45.373580] binder: 685:685 ioctl 40046210 7fe33e3e34 returned -22 [ 45.383276] subsys-pil-tz 17300000.qcom,lpass: Falling back to syfs fallback for: adsp.mdt [ 45.383476] subsys-pil-tz 8300000.qcom,turing: Falling back to syfs fallback for: cdsp.mdt [ 45.399130] ueventd: firmware: loading 'adsp.mdt' for '/devices/platform/soc/17300000.qcom,lpass/firmware/adsp.mdt' [ 45.411181] ueventd: firmware: loading 'cdsp.mdt' for '/devices/platform/soc/8300000.qcom,turing/firmware/cdsp.mdt' [ 45.413639] ueventd: firmware: could not find firmware for dsi_prop [ 45.423938] cnss: MHI status cb is called with reason MISSION_MODE(6) [ 45.428901] ueventd: firmware: attempted /etc/firmware/dsi_prop, open failed: No such file or directory [ 45.429268] cnss: Notify MHI to use already allocated images [ 45.429942] ueventd: loading /devices/platform/soc/17300000.qcom,lpass/firmware/adsp.mdt took 31ms [ 45.433228] ueventd: loading /devices/platform/soc/8300000.qcom,turing/firmware/cdsp.mdt took 22ms [ 45.434586] subsys-pil-tz 8300000.qcom,turing: cdsp: loading from 0x0000000087800000 to 0x0000000088c00000 [ 45.438662] ueventd: firmware: attempted /odm/firmware/dsi_prop, open failed: No such file or directory [ 45.438673] ueventd: firmware: attempted /vendor/firmware/dsi_prop, open failed: No such file or directory [ 45.448718] [drm:dp_display_init_aux_switch][msm-dp-err][46 ]failed to register notifier (-22) [ 45.453680] subsys-pil-tz 8300000.qcom,turing: Falling back to syfs fallback for: cdsp.b02 [ 45.455681] subsys-pil-tz 8300000.qcom,turing: Falling back to syfs fallback for: cdsp.b03 [ 45.456891] subsys-pil-tz 8300000.qcom,turing: Falling back to syfs fallback for: cdsp.b04 [ 45.458732] cnss: PM relax, state: 0x8, count: 0 [ 45.458971] subsys-pil-tz 8300000.qcom,turing: Falling back to syfs fallback for: cdsp.b05 [ 45.459058] OF: graph: no port node found in /soc/qcom,dsi-display-primary [ 45.459135] [drm] [msm-dsi-warn]: [hx82101+hx8692 video mode dsi truly panel] fallback to default te-pin-select [ 45.460561] subsys-pil-tz 8300000.qcom,turing: Falling back to syfs fallback for: cdsp.b06 [ 45.461407] subsys-pil-tz 8300000.qcom,turing: Falling back to syfs fallback for: cdsp.b08 [ 45.461577] subsys-pil-tz 17300000.qcom,lpass: adsp: loading from 0x000000008a100000 to 0x000000008be00000 [ 45.461702] subsys-pil-tz 8300000.qcom,turing: Falling back to syfs fallback for: cdsp.b09 [ 45.462090] subsys-pil-tz 8300000.qcom,turing: Falling back to syfs fallback for: cdsp.b11 [ 45.467671] msm_drm ae00000.qcom,mdss_mdp: Linked as a consumer to regulator.31 [ 45.470868] register_client_adhoc:find path.src 1 dest 590 [ 45.471122] subsys-pil-tz 17300000.qcom,lpass: Falling back to syfs fallback for: adsp.b02 [ 45.471992] subsys-pil-tz 17300000.qcom,lpass: Falling back to syfs fallback for: adsp.b03 [ 45.472104] register_client_adhoc:Client handle 16 mdss_reg [ 45.472224] register_client_adhoc:find path.src 22 dest 512 [ 45.472580] [drm:dp_display_init_aux_switch][msm-dp-err][46 ]failed to register notifier (-22) [ 45.473309] subsys-pil-tz 17300000.qcom,lpass: Falling back to syfs fallback for: adsp.b04 [ 45.473517] register_client_adhoc:find path.src 23 dest 512 [ 45.474334] subsys-pil-tz 17300000.qcom,lpass: Falling back to syfs fallback for: adsp.b05 [ 45.474687] register_client_adhoc:Client handle 66 mdss_sde [ 45.475163] [drm:sde_dbg_init:4676] evtlog_status: enable:11, panic:1, dump:2 [ 45.475199] subsys-pil-tz 17300000.qcom,lpass: Falling back to syfs fallback for: adsp.b06 [ 45.475298] msm_drm ae00000.qcom,mdss_mdp: bound soc:qcom,wb-display@0 (ops sde_wb_comp_ops) [ 45.475856] subsys-pil-tz 17300000.qcom,lpass: Falling back to syfs fallback for: adsp.b07 [ 45.476435] subsys-pil-tz 17300000.qcom,lpass: Falling back to syfs fallback for: adsp.b08 [ 45.477161] subsys-pil-tz 17300000.qcom,lpass: Falling back to syfs fallback for: adsp.b09 [ 45.477642] msm-dsi-display soc:qcom,dsi-display-primary: Linked as a consumer to regulator.25 [ 45.477790] subsys-pil-tz 17300000.qcom,lpass: Falling back to syfs fallback for: adsp.b10 [ 45.478262] [drm:dsi_display_bind] [msm-dsi-info]: Successfully bind display panel 'qcom,mdss_dsi_panel_hx82101_hx8692_truly_v2_video' [ 45.478805] msm_drm ae00000.qcom,mdss_mdp: bound soc:qcom,dsi-display-primary (ops dsi_display_comp_ops) [ 45.478886] msm_drm ae00000.qcom,mdss_mdp: bound af20000.qcom,sde_rscc (ops sde_rsc_comp_ops) [ 45.478967] [drm] mapped mdp address space @ffffff8024300000 [ 45.481894] subsys-pil-tz 17300000.qcom,lpass: Falling back to syfs fallback for: adsp.b11 [ 45.482170] qcom_rpmh DRV:apps_rsc TCS Busy, retrying RPMH message send: addr=0x30080 [ 45.482593] [drm:_sde_kms_hw_init_blocks:3613] sde hardware revision:0x60000000 [ 45.483887] subsys-pil-tz 17300000.qcom,lpass: Falling back to syfs fallback for: adsp.b12 [ 45.484440] subsys-pil-tz 17300000.qcom,lpass: Falling back to syfs fallback for: adsp.b13 [ 45.485848] msmdrm_smmu ae00000.qcom,mdss_mdp:qcom,smmu_sde_unsec_cb: Linked as a consumer to 15000000.apps-smmu [ 45.485927] subsys-pil-tz 17300000.qcom,lpass: Falling back to syfs fallback for: adsp.b14 [ 45.488007] subsys-pil-tz 17300000.qcom,lpass: Falling back to syfs fallback for: adsp.b15 [ 45.488354] iommu: Adding device ae00000.qcom,mdss_mdp:qcom,smmu_sde_unsec_cb to group 57 [ 45.489071] [drm] probing device qcom,smmu_sde_unsec [ 45.489085] [drm] Created domain mdp_ns, secure=0 [ 45.491210] msmdrm_smmu ae00000.qcom,mdss_mdp:qcom,smmu_sde_sec_cb: Linked as a consumer to 15000000.apps-smmu [ 45.493173] iommu: Adding device ae00000.qcom,mdss_mdp:qcom,smmu_sde_sec_cb to group 58 [ 45.493925] [drm] probing device qcom,smmu_sde_sec [ 45.493952] [drm] Created domain mdp_s, secure=1 [ 45.495433] subsys-pil-tz 17300000.qcom,lpass: Falling back to syfs fallback for: adsp.b16 [ 45.495501] subsys-pil-tz 17300000.qcom,lpass: Falling back to syfs fallback for: adsp.b17 [ 45.497260] subsys-pil-tz 17300000.qcom,lpass: Falling back to syfs fallback for: adsp.b18 [ 45.523131] [drm:dsi_panel_get_mode] [msm-dsi-info]: default topology: lm: 1 comp_enc:0 intf: 1 [ 45.623548] subsys-pil-tz 8300000.qcom,turing: cdsp: Brought out of reset [ 45.632064] subsys-pil-tz 8300000.qcom,turing: cdsp: Power/Clock ready interrupt received [ 45.642301] [drm:dp_display_init_aux_switch][msm-dp-err][693 ]failed to register notifier (-22) [ 45.952919] subsys-pil-tz 8300000.qcom,turing: Subsystem error monitoring/handling services are up [ 45.988223] qcom_smd_qrtr_probe:Entered [ 45.989733] adsprpc: fastrpc_restart_notifier_cb: cdsp subsystem is up [ 45.995716] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 45.996171] qcom_smd_qrtr_probe:SMD QRTR driver probed [ 46.004551] subsys-pil-tz 9800000.qcom,npu: Falling back to syfs fallback for: npu.mdt [ 46.011203] msm_cvp: info: Opening cvp instance: ffffffc929184480 [ 46.016320] [drm] No driver support for vblank timestamp query. [ 46.022608] msm_cvp_v4l2 ab00000.qcom,cvp: Linked as a consumer to regulator.83 [ 46.042834] qcom_rpmh DRV:apps_rsc TCS Busy, retrying RPMH message send: addr=0x30080 [ 46.044106] msm_cvp_v4l2 ab00000.qcom,cvp: Linked as a consumer to regulator.82 [ 46.044964] binder: 686:686 ioctl 40046210 7fd9f146e4 returned -22 [ 46.049114] binder: 686:686 ioctl 40046210 7fd9f148f4 returned -22 [ 46.058825] subsys-pil-tz 17300000.qcom,lpass: adsp: Brought out of reset [ 46.081699] subsys-pil-tz 9800000.qcom,npu: npu: loading from 0x0000000086900000 to 0x0000000086e00000 [ 46.083780] subsys-pil-tz 17300000.qcom,lpass: Subsystem error monitoring/handling services are up [ 46.086826] adsprpc: fastrpc_rpmsg_probe: opened rpmsg channel for cdsp [ 46.095989] [drm:dp_display_init_aux_switch][msm-dp-err][693 ]failed to register notifier (-22) [ 46.100743] subsys-pil-tz 17300000.qcom,lpass: adsp: Power/Clock ready interrupt received [ 46.110776] subsys-pil-tz 9800000.qcom,npu: Falling back to syfs fallback for: npu.b02 [ 46.111331] subsys-pil-tz 9800000.qcom,npu: Falling back to syfs fallback for: npu.b03 [ 46.112066] subsys-pil-tz 9800000.qcom,npu: Falling back to syfs fallback for: npu.b04 [ 46.112068] subsys-pil-tz 9800000.qcom,npu: Falling back to syfs fallback for: npu.b06 [ 46.112332] subsys-pil-tz 9800000.qcom,npu: Falling back to syfs fallback for: npu.b05 [ 46.112462] adsprpc: fastrpc_restart_notifier_cb: adsp subsystem is up [ 46.113483] [drm] Initialized msm_drm 1.3.0 20130625 for ae00000.qcom,mdss_mdp on minor 0 [ 46.113708] [drm] cont_splash feature not enabled [ 46.115077] subsys-restart: __subsystem_get(): Changing subsys fw_name to cvpss [ 46.115360] subsys-pil-tz abb0000.qcom,cvpss: Falling back to syfs fallback for: cvpss.mdt [ 46.116788] qcom_rpmh DRV:apps_rsc TCS Busy, retrying RPMH message send: addr=0x30030 [ 46.119485] cnss: DRV subsystem is connected [ 46.122235] [drm:dp_display_init_aux_switch][msm-dp-err][693 ]failed to register notifier (-22) [ 46.122585] adsprpc: fastrpc_rpmsg_probe: opened rpmsg channel for adsp [ 46.136393] qcom_smd_qrtr_probe:Entered [ 46.141222] qcom_rpmh DRV:apps_rsc TCS Busy, retrying RPMH message send: addr=0x30040 [ 46.170010] subsys-pil-tz abb0000.qcom,cvpss: cvpss: loading from 0x0000000087300000 to 0x0000000087800000 [ 46.180673] [drm:dp_display_init_aux_switch][msm-dp-err][757 ]failed to register notifier (-22) [ 46.194762] subsys-pil-tz 9800000.qcom,npu: npu: Brought out of reset [ 46.198007] subsys-pil-tz abb0000.qcom,cvpss: Falling back to syfs fallback for: cvpss.b02 [ 46.198049] subsys-pil-tz abb0000.qcom,cvpss: Falling back to syfs fallback for: cvpss.b03 [ 46.198058] subsys-pil-tz abb0000.qcom,cvpss: Falling back to syfs fallback for: cvpss.b04 [ 46.198440] subsys-pil-tz abb0000.qcom,cvpss: Falling back to syfs fallback for: cvpss.b05 [ 46.198513] subsys-pil-tz abb0000.qcom,cvpss: Falling back to syfs fallback for: cvpss.b06 [ 46.198796] subsys-pil-tz abb0000.qcom,cvpss: Falling back to syfs fallback for: cvpss.b07 [ 46.199262] subsys-pil-tz abb0000.qcom,cvpss: Falling back to syfs fallback for: cvpss.b08 [ 46.199280] subsys-pil-tz abb0000.qcom,cvpss: Falling back to syfs fallback for: cvpss.b09 [ 46.201540] subsys-pil-tz abb0000.qcom,cvpss: Falling back to syfs fallback for: cvpss.b10 [ 46.201701] subsys-pil-tz abb0000.qcom,cvpss: Falling back to syfs fallback for: cvpss.b19 [ 46.218294] NPU_WARN: host_session_msg_hdlr: 1904 handle npu session msg when FW is disabled [ 46.218354] NPU_INFO: npu_get_fw_caps: 236 fw caps 0:2007 [ 46.218360] NPU_INFO: npu_get_fw_caps: 236 fw caps 1:80000005 [ 46.218364] NPU_INFO: npu_get_fw_caps: 236 fw caps 2:0 [ 46.218368] NPU_INFO: npu_get_fw_caps: 236 fw caps 3:0 [ 46.218372] NPU_INFO: npu_get_fw_caps: 236 fw caps 4:0 [ 46.218376] NPU_INFO: npu_get_fw_caps: 236 fw caps 5:0 [ 46.218379] NPU_INFO: npu_get_fw_caps: 236 fw caps 6:0 [ 46.218383] NPU_INFO: npu_get_fw_caps: 236 fw caps 7:0 [ 46.223656] [drm:dp_display_init_aux_switch][msm-dp-err][757 ]failed to register notifier (-22) [ 46.282534] subsys-pil-tz abb0000.qcom,cvpss: cvpss: Brought out of reset [ 46.285328] qcom_smd_qrtr_probe:SMD QRTR driver probed [ 46.328336] i2c_geni 980000.i2c: i2c error :-107 [ 46.328357] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x00 [ 46.337355] i2c_geni 980000.i2c: i2c error :-107 [ 46.337366] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 46.471273] apr_tal_rpmsg qcom,glink:adsp.apr_audio_svc.-1.-1: apr_tal_rpmsg_probe: Channel[apr_audio_svc] state[Up] [ 46.503915] [drm:dp_display_init_aux_switch][msm-dp-err][7 ]failed to register notifier (-22) [ 46.517883] qcom_smd_qrtr_probe:Entered [ 46.522751] qcom_smd_qrtr_probe:SMD QRTR driver probed [ 46.540560] msm_cvp: info: Closed cvp instance: ffffffc929184480 session_id = 0 [ 46.549718] [drm:dp_display_init_aux_switch][msm-dp-err][7 ]failed to register notifier (-22) [ 47.267122] subsys-restart: __subsystem_get(): Changing subsys fw_name to slpi [ 47.275993] subsys-pil-tz 5c00000.qcom,ssc: Falling back to syfs fallback for: slpi.mdt [ 47.307264] subsys-pil-tz 5c00000.qcom,ssc: slpi: loading from 0x0000000088c00000 to 0x000000008a100000 [ 47.325719] subsys-pil-tz 5c00000.qcom,ssc: Falling back to syfs fallback for: slpi.b03 [ 47.326011] subsys-pil-tz 5c00000.qcom,ssc: Falling back to syfs fallback for: slpi.b02 [ 47.327809] subsys-pil-tz 5c00000.qcom,ssc: Falling back to syfs fallback for: slpi.b04 [ 47.329970] subsys-pil-tz 5c00000.qcom,ssc: Falling back to syfs fallback for: slpi.b05 [ 47.334924] subsys-pil-tz 5c00000.qcom,ssc: Falling back to syfs fallback for: slpi.b06 [ 47.345127] subsys-pil-tz 5c00000.qcom,ssc: Falling back to syfs fallback for: slpi.b07 [ 47.351178] subsys-pil-tz 5c00000.qcom,ssc: Falling back to syfs fallback for: slpi.b08 [ 47.351436] subsys-pil-tz 5c00000.qcom,ssc: Falling back to syfs fallback for: slpi.b10 [ 47.351768] subsys-pil-tz 5c00000.qcom,ssc: Falling back to syfs fallback for: slpi.b09 [ 47.353378] subsys-pil-tz 5c00000.qcom,ssc: Falling back to syfs fallback for: slpi.b12 [ 47.353701] subsys-pil-tz 5c00000.qcom,ssc: Falling back to syfs fallback for: slpi.b11 [ 47.353898] subsys-pil-tz 5c00000.qcom,ssc: Falling back to syfs fallback for: slpi.b13 [ 47.353995] subsys-pil-tz 5c00000.qcom,ssc: Falling back to syfs fallback for: slpi.b15 [ 47.354250] subsys-pil-tz 5c00000.qcom,ssc: Falling back to syfs fallback for: slpi.b16 [ 47.354287] subsys-pil-tz 5c00000.qcom,ssc: Falling back to syfs fallback for: slpi.b14 [ 47.355242] subsys-pil-tz 5c00000.qcom,ssc: Falling back to syfs fallback for: slpi.b17 [ 47.356705] subsys-pil-tz 5c00000.qcom,ssc: Falling back to syfs fallback for: slpi.b20 [ 47.356880] subsys-pil-tz 5c00000.qcom,ssc: Falling back to syfs fallback for: slpi.b18 [ 47.356961] subsys-pil-tz 5c00000.qcom,ssc: Falling back to syfs fallback for: slpi.b19 [ 47.528062] binder: 829:829 ioctl 40046210 7fcb8966b4 returned -22 [ 47.572172] subsys-pil-tz 5c00000.qcom,ssc: slpi: Brought out of reset [ 47.591259] binder: 834:834 ioctl 40046210 7ff0a64454 returned -22 [ 47.598682] binder: 834:834 ioctl 40046210 7ff0a64434 returned -22 [ 47.630956] subsys-pil-tz 5c00000.qcom,ssc: Subsystem error monitoring/handling services are up [ 47.640430] subsys-pil-tz 5c00000.qcom,ssc: slpi: Power/Clock ready interrupt received [ 47.648668] qcom_rpmh DRV:apps_rsc TCS Busy, retrying RPMH message send: addr=0x30030 [ 47.656904] qcom_rpmh DRV:apps_rsc TCS Busy, retrying RPMH message send: addr=0x30040 [ 47.660319] adsprpc: fastrpc_restart_notifier_cb: slpi subsystem is up [ 47.669261] adsprpc: fastrpc_rpmsg_probe: opened rpmsg channel for slpi [ 47.686097] [drm:dp_display_init_aux_switch][msm-dp-err][54 ]failed to register notifier (-22) [ 47.693140] qcom_smd_qrtr_probe:Entered [ 47.704568] qcom_smd_qrtr_probe:SMD QRTR driver probed [ 47.720543] [drm:dp_display_init_aux_switch][msm-dp-err][7 ]failed to register notifier (-22) [ 47.804558] binder: 883:883 ioctl 40046210 7fd417db34 returned -22 [ 47.896195] binder: 940:940 ioctl 40046210 7fffe4c324 returned -22 [ 48.228877] cam-a5 ac00000.qcom,a5: Falling back to syfs fallback for: CAMERA_ICP.elf [ 48.350517] CAM_INFO: CAM-HFI: cam_hfi_init: 883 Init IO1 : [0x10c00000 0xcf300000] IO2 [0xe0200000 0x1ed00000] [ 48.368206] i2c_geni 980000.i2c: i2c error :-107 [ 48.373535] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x00 [ 48.386590] CAM_INFO: CAM-ICP: cam_icp_mgr_process_dbg_buf: 2585 FW_DBG:CICP_FW_E : HFI :QC_IMAGE_VERSION_STRING=CICP.FW.3.0-00012,OEM_IMAGE_VERSION_STRING=CRM,BUILD_TIME: Dec 1 2020 11:05:55,CACHE_ENABLED at icphostinterface.c:636 QC_IMAGE_VERSION_STRING=CICP.FW.3.0-00012 OEM_IMAGE_VERSION_STRING=CRM [ 48.386605] CAM_INFO: CAM-ICP: cam_icp_mgr_hw_open: 3892 FW download done successfully [ 48.389819] i2c_geni 980000.i2c: i2c error :-107 [ 48.414517] CAM_INFO: CAM-ICP: cam_icp_mgr_process_dbg_buf: 2585 FW_DBG:CICP_FW_E : HFI :ELF variant: CACHE-ENABLED:T480:API_V2:USE_CDM_1_1: , API version: 0x2000058 at icphostinterface.c:637 QC_IMAGE_VERSION_STRING=CICP.FW.3.0-00012 OEM_IMAGE_VERSION_STRING=CRM [ 48.423257] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 48.443101] init: starting service 'pasr-hal-1-0'... [ 48.482271] binder: 1002:1002 ioctl 40046210 7fe098aad4 returned -22 [ 48.490673] init: starting service 'qspmhal'... [ 48.510138] QSEECOM: qseecom_load_app: App (soter64) does'nt exist, loading apps for first time [ 48.523334] init: starting service 'secureelement-hal_1_2'... [ 48.531182] QSEECOM: qseecom_load_app: App with id 4 (soter64) now loaded [ 48.569401] init: starting service 'vendor.vppservice'... [ 48.595410] init: Command 'class_start hal' action=boot (/system/etc/init/hw/init.rc:1113) took 1280ms and succeeded [ 48.606326] init: Service 'vendor.light-hal-2-0' (pid 862) exited with status 0 [ 48.614729] init: Sending signal 9 to service 'vendor.light-hal-2-0' (pid 862) process group... [ 48.627306] libprocessgroup: Successfully killed process cgroup uid 1000 pid 862 in 1ms [ 48.641340] init: Control message: Could not find 'android.hardware.health@2.1::IHealth/default' for ctl.interface_start from pid: 517 (/system/bin/hwservicemanager) [ 48.658612] init: starting service 'qcom-c_core-sh'... [ 48.849422] sysmon-qmi: ssctl_new_server: Connection established between QMI handle and slpi's SSCTL service [ 48.856569] coresight-remote-etm soc:ssc_etm0: Connection established between QMI handle and 8 service [ 48.873125] msm_vidc: high: 00000001: ....d: Opening video instance: ffffffc90ef70000, 1 [ 48.896510] diag: In diag_send_feature_mask_update, control channel is not open, p: 3, ffffffa50e18de78 [ 48.897452] msm_vidc_v4l2 aa00000.qcom,vidc: Linked as a consumer to regulator.81 [ 48.912212] diag: In diag_send_feature_mask_update, control channel is not open, p: 5, ffffffa50e18e318 [ 48.912723] sysmon-qmi: ssctl_new_server: Connection established between QMI handle and cdsp's SSCTL service [ 48.912751] coresight-remote-etm soc:turing_etm0: Connection established between QMI handle and 13 service [ 48.912875] sysmon-qmi: ssctl_new_server: Connection established between QMI handle and adsp's SSCTL service [ 48.912898] coresight-remote-etm soc:audio_etm0: Connection established between QMI handle and 5 service [ 48.912921] sysmon-qmi: ssctl_new_server: Connection established between QMI handle and slpi's SSCTL service [ 48.912944] coresight-remote-etm soc:npu_etm0: Connection established between QMI handle and 14 service [ 48.912966] cnss: WLFW server arriving: node 7 port 1 [ 48.912976] cnss: Posting event: SERVER_ARRIVE(0), state: 0x8 flags: 0x0 [ 48.912991] cnss: PM stay awake, state: 0x8, count: 1 [ 48.913073] cnss: PM relax, state: 0x8, count: 0 [ 48.914244] cnss: PM stay awake, state: 0x8, count: 1 [ 48.914257] cnss: Processing driver event: SERVER_ARRIVE(0), state: 0x8 [ 48.914358] cnss: QMI WLFW service connected, state: 0x9 [ 48.914368] cnss: Sending indication register message, state: 0x9 [ 48.919625] msm_vidc_v4l2 aa00000.qcom,vidc: Linked as a consumer to regulator.80 [ 48.923691] cnss: Sending host capability message, state: 0x9 [ 48.923717] cnss: Number of clients is 2 [ 48.923726] cnss: Assign MSI to user: WAKE, num_vectors: 1, user_base_data: 813, base_vector: 13 [ 48.923732] cnss: WAKE MSI base data is 813 [ 48.923738] cnss: Calibration done is 0 [ 48.923746] cnss: Sending iova starting 0xa0000000 with size 0x10010000 [ 48.927094] diag: In diag_send_feature_mask_update, control channel is not open, p: 6, ffffffa50e18e568 [ 48.933302] servloc: service_locator_new_server: Connection established with the Service locator [ 48.933861] servloc: init_service_locator: Service locator initialized [ 48.942309] cnss: PM relax, state: 0x9, count: 0 [ 48.958946] diag: In diag_send_peripheral_buffering_mode, buffering flag not set for 5 [ 48.969823] subsys-restart: __subsystem_get(): Changing subsys fw_name to venus [ 48.973881] service-notifier: service_notifier_new_server: Connection established between QMI handle and 74 service [ 48.974707] audio_notifer_reg_service: service PDR_ADSP is in use [ 48.980743] diag: In diag_send_peripheral_buffering_mode, buffering flag not set for 1 [ 48.989328] apr_adsp_up: Q6 is Up [ 48.992951] diag: In diag_send_peripheral_buffering_mode, buffering flag not set for 3 [ 49.011683] subsys-pil-tz aab0000.qcom,venus: Falling back to syfs fallback for: venus.mdt [ 49.014642] adsprpc: fastrpc_get_service_location_notify: PDR notifier for adsp registered for msm/adsp/audio_pd (audio_pdr_adsprpc) [ 49.014647] adsprpc: fastrpc_get_service_location_notify: audio_pdr_adsprpc (msm/adsp/audio_pd) PDR service for adsp is up [ 49.018903] diag: In diag_send_peripheral_buffering_mode, buffering flag not set for 6 [ 49.022095] binder: 1050:1050 ioctl 40046210 7fcb811b04 returned -22 [ 49.036967] msm-audio-ion soc:qcom,msm-audio-apr:qcom,msm-audio-ion: Linked as a consumer to 15000000.apps-smmu [ 49.095409] rmt_storage:ERR:main: Mmap Failed for rmts (-1)...pausing execution! [ 49.104779] subsys-pil-tz aab0000.qcom,venus: venus: loading from 0x0000000086e00000 to 0x0000000087300000 [ 49.120537] iommu: Adding device soc:qcom,msm-audio-apr:qcom,msm-audio-ion to group 59 [ 49.134294] binder: 1054:1054 ioctl 40046210 7fd0d3f0c4 returned -22 [ 49.142930] type=1400 audit(11200.315:12): avc: denied { setattr } for comm="init" name="rawdump" dev="tmpfs" ino=1777 scontext=u:r:vendor_init:s0 tcontext=u:object_r:block_device:s0 tclass=lnk_file permissive=0 [ 49.154693] subsys-pil-tz aab0000.qcom,venus: Falling back to syfs fallback for: venus.b02 [ 49.155430] subsys-pil-tz aab0000.qcom,venus: Falling back to syfs fallback for: venus.b04 [ 49.155462] subsys-pil-tz aab0000.qcom,venus: Falling back to syfs fallback for: venus.b05 [ 49.155768] subsys-pil-tz aab0000.qcom,venus: Falling back to syfs fallback for: venus.b06 [ 49.155801] subsys-pil-tz aab0000.qcom,venus: Falling back to syfs fallback for: venus.b03 [ 49.155851] subsys-pil-tz aab0000.qcom,venus: Falling back to syfs fallback for: venus.b07 [ 49.155858] subsys-pil-tz aab0000.qcom,venus: Falling back to syfs fallback for: venus.b08 [ 49.156395] subsys-pil-tz aab0000.qcom,venus: Falling back to syfs fallback for: venus.b09 [ 49.156410] subsys-pil-tz aab0000.qcom,venus: Falling back to syfs fallback for: venus.b10 [ 49.156755] subsys-pil-tz aab0000.qcom,venus: Falling back to syfs fallback for: venus.b19 [ 49.164987] type=1400 audit(11200.327:13): avc: denied { setattr } for comm="init" name="rawdump" dev="tmpfs" ino=1777 scontext=u:r:vendor_init:s0 tcontext=u:object_r:block_device:s0 tclass=lnk_file permissive=0 [ 49.165160] sps:BAM 0x0000000003a84000 (va:0xffffff801c740000) enabled: ver:0x19, number of pipes:25 [ 49.165238] sps:BAM 0x0000000003a84000 is registered. [ 49.183778] [drm:dp_display_init_aux_switch][msm-dp-err][100 ]failed to register notifier (-22) [ 49.217111] Mass Storage Function, version: 2009/09/11 [ 49.217134] LUN: removable file: (no medium) [ 49.225746] [drm:dp_display_init_aux_switch][msm-dp-err][100 ]failed to register notifier (-22) [ 49.246907] file system registered [ 49.267082] f_cdev_alloc: port_name:at_usb0 (ffffffc90d5d0080) portno:(0) [ 49.270663] f_cdev_alloc: port_name:at_usb1 (ffffffc90d5d4880) portno:(1) [ 49.272236] binder: 1048:1048 ioctl 40046210 7fdd3c8374 returned -22 [ 49.272619] binder: 1048:1048 ioctl 40046210 7fdd3c8394 returned -22 [ 49.273336] f_cdev_alloc: port_name:at_usb2 (ffffffc910488080) portno:(2) [ 49.300130] [drm:dp_display_init_aux_switch][msm-dp-err][100 ]failed to register notifier (-22) [ 49.347472] binder: 1065:1065 ioctl 40046210 7fc637cf34 returned -22 [ 49.356618] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: msm_init_aux_dev: Max WSA devices is 0 for this target? [ 49.366033] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: CODEC DAI wsa_macro_vifeedback not registered [ 49.382305] binder: 1065:1065 ioctl 40046210 7fc637e964 returned -22 [ 49.396426] qcom-lpi-pinctrl soc:qcom,msm-audio-apr:qcom,q6core-audio:lpi_pinctrl@33c0000: snd_event_notify: No snd dev entry found [ 49.416608] subsys-pil-tz aab0000.qcom,venus: venus: Brought out of reset [ 49.468479] msm_vidc: high: 00000001: h264d: Closed video instance: ffffffc90ef70000 [ 49.470167] msm_vidc: high: 00000001: ....d: Opening video instance: ffffffc90ef70000, 1 [ 49.502712] platform soc:qcom,msm-audio-apr:qcom,voice-mhi-audio: assigned reserved memory node mailbox_region [ 49.507954] msm_vidc: high: 00000001: h264d: Closed video instance: ffffffc90ef70000 [ 49.509111] msm_vidc: high: 00000001: ....d: Opening video instance: ffffffc90ef70000, 1 [ 49.515396] msm_vidc: high: 00000001: h265d: Closed video instance: ffffffc90ef70000 [ 49.516596] [drm:dp_display_init_aux_switch][msm-dp-err][452 ]failed to register notifier (-22) [ 49.516738] msm_vidc: high: 00000001: ....d: Opening video instance: ffffffc90ef70000, 1 [ 49.533494] msm_vidc: high: 00000001: h265d: Closed video instance: ffffffc90ef70000 [ 49.534827] msm_vidc: high: 00000001: ....d: Opening video instance: ffffffc90ef70000, 1 [ 49.537892] bolero-clk-rsc-mngr bolero-clk-rsc-mngr: DMA mask not set [ 49.543780] msm_vidc: high: 00000001: vp8d: Closed video instance: ffffffc90ef70000 [ 49.545474] msm_vidc: high: 00000001: ....d: Opening video instance: ffffffc90ef70000, 1 [ 49.557188] tx_macro tx-macro: DMA mask not set [ 49.557348] tx_macro tx-macro: tx_macro_probe: va-macro not registered yet, defer [ 49.558485] msm_vidc: high: 00000001: vp9d: Closed video instance: ffffffc90ef70000 [ 49.572255] msm_vidc: high: 00000001: ....d: Opening video instance: ffffffc90ef70000, 1 [ 49.578546] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: msm_init_aux_dev: Max WSA devices is 0 for this target? [ 49.585587] rx_macro rx-macro: DMA mask not set [ 49.585807] rx_macro rx-macro: rx_macro_probe: va-macro not registered yet, defer [ 49.588213] type=1107 audit(11200.763:14): uid=0 auid=4294967295 ses=4294967295 subj=u:r:init:s0 msg='avc: denied { set } for property=ctl.start$console pid=1127 uid=0 gid=0 scontext=u:r:vendor_qti_init_shell:s0 tcontext=u:object_r:ctl_start_prop:s0 tclass=property_service permissive=0' [ 49.589141] msm_vidc: high: 00000001: vp9d: Closed video instance: ffffffc90ef70000 [ 49.594448] msm_vidc: high: 00000001: ....d: Opening video instance: ffffffc90ef70000, 1 [ 49.599059] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: CODEC DAI wsa_macro_vifeedback not registered [ 49.603513] msm_vidc: high: 00000001: mpg2d: Closed video instance: ffffffc90ef70000 [ 49.613584] msm_vidc: high: 00000001: ....d: Opening video instance: ffffffc90ef70000, 1 [ 49.617481] wsa_macro wsa-macro: DMA mask not set [ 49.617674] wsa_macro wsa-macro: wsa_macro_probe: va-macro not registered yet, defer [ 49.621985] msm_vidc: high: 00000001: mpg2d: Closed video instance: ffffffc90ef70000 [ 49.628092] msm_vidc: high: 00000001: ....e: Opening video instance: ffffffc90ef70000, 0 [ 49.633736] [drm:dp_display_init_aux_switch][msm-dp-err][452 ]failed to register notifier (-22) [ 49.647318] va_macro va-macro: DMA mask not set [ 49.647525] msm_cdc_pinctrl_get_gpiodata: device node is null [ 49.659388] va_macro va-macro: Linked as a consumer to regulator.7 [ 49.659935] va_macro va-macro: bolero_register_macro: register macro successful:3 [ 49.665664] wcd938x_codec wcd938x-codec: DMA mask not set [ 49.665985] wcd938x_codec wcd938x-codec: msm_cdc_dt_parse_vreg_info: cdc-vdd-rxtx: vol=[1800000 1800000]uV, curr=[30000]uA, ond 0 lpm 0 [ 49.666031] wcd938x_codec wcd938x-codec: msm_cdc_dt_parse_vreg_info: cdc-vddio: vol=[1800000 1800000]uV, curr=[30000]uA, ond 0 lpm 0 [ 49.666076] wcd938x_codec wcd938x-codec: msm_cdc_dt_parse_vreg_info: cdc-vdd-buck: vol=[1800000 1800000]uV, curr=[650000]uA, ond 0 lpm 0 [ 49.666123] wcd938x_codec wcd938x-codec: msm_cdc_dt_parse_vreg_info: cdc-vdd-mic-bias: vol=[3296000 3296000]uV, curr=[30000]uA, ond 0 lpm 0 [ 49.667161] wcd938x_codec wcd938x-codec: Linked as a consumer to regulator.7 [ 49.670992] wcd938x_codec wcd938x-codec: Linked as a consumer to regulator.48 [ 49.674249] msm_vidc: high: 00000001: h264e: Closed video instance: ffffffc90ef70000 [ 49.688447] msm_vidc: high: 00000001: ....e: Opening video instance: ffffffc90f9bc000, 0 [ 49.695334] tx_macro tx-macro: bolero_register_macro: register macro successful:0 [ 49.702663] rx_macro rx-macro: bolero_register_macro: register macro successful:1 [ 49.706051] msm_vidc: high: 00000001: h265e: Closed video instance: ffffffc90f9bc000 [ 49.708581] msm_vidc: high: 00000001: ....e: Opening video instance: ffffffc90f9bc000, 0 [ 49.716151] msm_vidc: high: 00000001: h265e: Closed video instance: ffffffc90f9bc000 [ 49.718910] msm_vidc: high: 00000001: ....e: Opening video instance: ffffffc90f9bc000, 0 [ 49.721973] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: msm_init_aux_dev: Max WSA devices is 0 for this target? [ 49.723951] kgsl kgsl-3d0: Falling back to syfs fallback for: a650_sqe.fw [ 49.725945] msm_vidc: high: 00000001: h265e: Closed video instance: ffffffc90f9bc000 [ 49.729419] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: CODEC DAI wsa_macro_vifeedback not registered [ 49.729638] msm_vidc: high: 00000001: ....e: Opening video instance: ffffffc93dc70000, 0 [ 49.743922] msm_vidc: err : 00000001: ....e: msm_vidc_comm_update_ctrl: failed: control name Ltr Count, min 0, max 0, step 0, default_value 0 [ 49.750389] wsa_macro wsa-macro: bolero_register_macro: register macro successful:2 [ 49.751223] msm_vidc: high: 00000001: vp8e: Closed video instance: ffffffc93dc70000 [ 49.755911] [drm:dp_display_init_aux_switch][msm-dp-err][100 ]failed to register notifier (-22) [ 49.785233] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: msm_init_aux_dev: Max WSA devices is 0 for this target? [ 49.791134] kgsl kgsl-3d0: Falling back to syfs fallback for: a650_gmu.bin [ 49.851813] swr-wcd tx_swr_ctrl: DMA mask not set [ 49.999683] binder: 1139:1139 ioctl 40046210 7ff9344c64 returned -22 [ 50.115770] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no source widget found for AUDIO_REF_EC_UL30 MUX [ 50.126611] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route AUDIO_REF_EC_UL30 MUX -> direct -> MM_UL30 [ 50.150501] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no source widget found for AUX_PCM_TX [ 50.159928] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route AUX_PCM_TX -> AUX_PCM_UL_TX -> VoLTE Stub Tx Mixer [ 50.179200] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no source widget found for AUX_PCM_RX [ 50.188674] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route AUX_PCM_RX -> direct -> BE_OUT [ 50.215966] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for MM_DL23 --> MultiMedia23 --> QUIN_TDM_RX_1 Audio Mixer [ 50.215992] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route MM_DL23 -> MultiMedia23 -> QUIN_TDM_RX_1 Audio Mixer [ 50.228611] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for MM_DL24 --> MultiMedia24 --> QUIN_TDM_RX_1 Audio Mixer [ 50.228633] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route MM_DL24 -> MultiMedia24 -> QUIN_TDM_RX_1 Audio Mixer [ 50.241268] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for MM_DL25 --> MultiMedia25 --> QUIN_TDM_RX_1 Audio Mixer [ 50.241289] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route MM_DL25 -> MultiMedia25 -> QUIN_TDM_RX_1 Audio Mixer [ 50.323890] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no source widget found for AUX_PCM_TX [ 50.333120] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route AUX_PCM_TX -> AUX_PCM_UL_TX -> SLIMBUS_0_RX Port Mixer [ 50.346173] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no source widget found for SEC_AUX_PCM_TX [ 50.355771] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route SEC_AUX_PCM_TX -> SEC_AUX_PCM_UL_TX -> SLIMBUS_0_RX Port Mixer [ 50.357606] binder: 1157:1157 ioctl 40046210 7fc826c9f4 returned -22 [ 50.369046] type=1400 audit(11201.539:15): avc: denied { write } for comm="init.qcom.usb.s" name="uvc.0" dev="configfs" ino=45403 scontext=u:r:vendor_qti_init_shell:s0 tcontext=u:object_r:configfs:s0 tclass=dir permissive=0 [ 50.369531] type=1400 audit(11201.543:16): avc: denied { write } for comm="init.qcom.usb.s" name="uvc.0" dev="configfs" ino=45403 scontext=u:r:vendor_qti_init_shell:s0 tcontext=u:object_r:configfs:s0 tclass=dir permissive=0 [ 50.369559] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no source widget found for TERT_AUX_PCM_TX [ 50.379242] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route TERT_AUX_PCM_TX -> TERT_AUXPCM_UL_TX -> SLIMBUS_0_RX Port Mixer [ 50.393090] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no source widget found for QUAT_AUX_PCM_TX [ 50.402844] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route QUAT_AUX_PCM_TX -> QUAT_AUXPCM_UL_TX -> SLIMBUS_0_RX Port Mixer [ 50.406850] type=1400 audit(11201.583:17): avc: denied { write } for comm="mkdir" name="header" dev="configfs" ino=45405 scontext=u:r:vendor_qti_init_shell:s0 tcontext=u:object_r:configfs:s0 tclass=dir permissive=0 [ 50.416801] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no source widget found for QUIN_AUX_PCM_TX [ 50.426654] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route QUIN_AUX_PCM_TX -> QUIN_AUXPCM_UL_TX -> SLIMBUS_0_RX Port Mixer [ 50.439032] type=1400 audit(11201.615:18): avc: denied { write } for comm="ln" name="fs" dev="configfs" ino=45414 scontext=u:r:vendor_qti_init_shell:s0 tcontext=u:object_r:configfs:s0 tclass=dir permissive=0 [ 50.440880] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no source widget found for SEN_AUX_PCM_TX [ 50.450605] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route SEN_AUX_PCM_TX -> SEN_AUXPCM_UL_TX -> SLIMBUS_0_RX Port Mixer [ 50.463835] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor0: Linked as a consumer to regulator.55 [ 50.469069] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor0: Linked as a consumer to regulator.57 [ 50.472098] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor0: Linked as a consumer to regulator.77 [ 50.472115] CAM_ERR: CAM-UTIL: cam_soc_util_regulator_enable: 1459 cam_clk set voltage failed [ 50.472126] CAM_ERR: CAM-SENSOR: cam_sensor_core_power_up: 1928 Reg enable failed [ 50.472132] CAM_ERR: CAM-SENSOR: cam_sensor_core_power_up: 2062 failed [ 50.473272] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor0: Dropping the link to regulator.57 [ 50.473607] CAM_ERR: CAM-SENSOR: cam_sensor_core_power_up: 2131 seq_val:100 > num_vreg: 4 [ 50.474659] i2c_geni 980000.i2c: i2c error :-107 [ 50.477706] type=1400 audit(11201.651:19): avc: denied { write } for comm="ln" name="ss" dev="configfs" ino=45415 scontext=u:r:vendor_qti_init_shell:s0 tcontext=u:object_r:configfs:s0 tclass=dir permissive=0 [ 50.479544] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x00 [ 50.481698] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor0: Dropping the link to regulator.55 [ 50.490060] i2c_geni 980000.i2c: i2c error :-107 [ 50.495265] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 50.502446] CAM_ERR: CAM-CCI: cam_cci_irq: 238 Base:ffffff80195fd000, M0_Q1 NACK ERROR: 0x10000000 [ 50.506094] CAM_ERR: CAM-CCI: cam_cci_read: 1306 ERROR with Slave 0xc0: [ 50.506127] CAM_ERR: CAM-CCI: cam_cci_read_bytes: 1561 failed to read rc:-22 [ 50.506143] CAM_ERR: CAM-SENSOR: cam_cci_i2c_read: 35 rc = -22 [ 50.506156] CAM_WARN: CAM-SENSOR: cam_sensor_match_id: 769 read id: 0x0 expected id 0x9281: [ 50.506167] ------------[ cut here ]------------ [ 50.506174] cam_cc_mclk0_clk already disabled [ 50.506198] WARNING: CPU: 6 PID: 848 at drivers/clk/clk.c:1144 clk_core_disable+0x230/0x270 [ 50.506201] Modules linked in: machine_dlkm(O) wcd938x_slave_dlkm(O) wcd938x_dlkm(O) wcd9xxx_dlkm(O) mbhc_dlkm(O) tx_macro_dlkm(O) rx_macro_dlkm(O) va_macro_dlkm(O) wsa_macro_dlkm(O) swr_ctrl_dlkm(O) bolero_cdc_dlkm(O) wsa881x_dlkm(O) wcd_core_dlkm(O) stub_dlkm(O) hdmi_dlkm(O) swr_dlkm(O) pinctrl_lpi_dlkm(O) pinctrl_wcd_dlkm(O) usf_dlkm(O) native_dlkm(O) platform_dlkm(O) q6_dlkm(O) adsp_loader_dlkm(O) apr_dlkm(O) snd_event_dlkm(O) q6_notifier_dlkm(O) q6_pdr_dlkm(O) msm_11ad_proxy [ 50.506242] CPU: 6 PID: 848 Comm: android.hardwar Tainted: G S W O 4.19.157+ #1 [ 50.506246] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 50.506251] pstate: 60400085 (nZCv daIf +PAN -UAO) [ 50.506255] pc : clk_core_disable+0x230/0x270 [ 50.506260] lr : clk_core_disable+0x230/0x270 [ 50.506263] sp : ffffff8012ee3970 [ 50.506266] x29: ffffff8012ee3970 x28: ffffffc90bd3da80 [ 50.506272] x27: 0000000000000000 x26: 0000000000000068 [ 50.506277] x25: ffffffa50a9272a8 x24: ffffffa50bf510fa [ 50.506282] x23: ffffffa50bf51082 x22: ffffffc944fb8a80 [ 50.506287] x21: 0000000000000000 x20: ffffffc94c564c80 [ 50.506292] x19: ffffffc94c564c80 x18: 0000000000000034 [ 50.506297] x17: ffffffa50d8f4000 x16: 00000000fffb4d24 [ 50.506302] x15: 00000000000b4d24 x14: 00000000000000c2 [ 50.506306] x13: 0000000000000000 x12: 00000000000000e0 [ 50.506311] x11: 0000000000000000 x10: 0000000000000001 [ 50.506316] x9 : 450514ed24766500 x8 : 450514ed24766500 [ 50.506321] x7 : ffffffa509d82700 x6 : 0000000000000000 [ 50.506325] x5 : 0000000000000080 x4 : 0000000000000001 [ 50.506329] x3 : 0000000000000000 x2 : 0000000000000007 [ 50.506333] x1 : 0000000000000007 x0 : 0000000000000021 [ 50.506338] Call trace: [ 50.506343] clk_core_disable+0x230/0x270 [ 50.506348] clk_disable+0x34/0x98 [ 50.506355] cam_soc_util_clk_disable+0x4c/0x68 [ 50.506360] cam_sensor_util_power_down+0x258/0x4b8 [ 50.506364] cam_sensor_power_down+0x34/0x130 [ 50.506368] cam_sensor_driver_cmd+0x35c/0x12e0 [ 50.506372] cam_sensor_subdev_ioctl+0x3c/0x80 [ 50.506378] subdev_do_ioctl_lock+0x764/0xbc8 [ 50.506382] video_usercopy+0x38c/0x850 [ 50.506386] subdev_ioctl+0x38/0x48 [ 50.506392] v4l2_ioctl+0x6c/0x80 [ 50.506398] do_vfs_ioctl+0x748/0x1210 [ 50.506402] __arm64_sys_ioctl+0x78/0xa0 [ 50.506407] el0_svc_common+0xa4/0x190 [ 50.506411] el0_svc_handler+0x6c/0x88 [ 50.506415] el0_svc+0x8/0xc [ 50.506420] irq event stamp: 293260 [ 50.506425] hardirqs last enabled at (293259): [] console_unlock+0x4bc/0x568 [ 50.506430] hardirqs last disabled at (293260): [] clk_enable_lock+0x20/0xc8 [ 50.506433] softirqs last enabled at (292644): [] __do_softirq+0x50c/0x554 [ 50.506437] softirqs last disabled at (292629): [] irq_exit+0xfc/0x120 [ 50.506440] ---[ end trace 1d70a345b84a8704 ]--- [ 50.506455] ------------[ cut here ]------------ [ 50.506469] cam_cc_mclk0_clk already unprepared [ 50.506485] WARNING: CPU: 6 PID: 848 at drivers/clk/clk.c:981 clk_core_unprepare+0x384/0x400 [ 50.506489] Modules linked in: machine_dlkm(O) wcd938x_slave_dlkm(O) wcd938x_dlkm(O) wcd9xxx_dlkm(O) mbhc_dlkm(O) tx_macro_dlkm(O) rx_macro_dlkm(O) va_macro_dlkm(O) wsa_macro_dlkm(O) swr_ctrl_dlkm(O) bolero_cdc_dlkm(O) wsa881x_dlkm(O) wcd_core_dlkm(O) stub_dlkm(O) hdmi_dlkm(O) swr_dlkm(O) pinctrl_lpi_dlkm(O) pinctrl_wcd_dlkm(O) usf_dlkm(O) native_dlkm(O) platform_dlkm(O) q6_dlkm(O) adsp_loader_dlkm(O) apr_dlkm(O) snd_event_dlkm(O) q6_notifier_dlkm(O) q6_pdr_dlkm(O) msm_11ad_proxy [ 50.506517] CPU: 6 PID: 848 Comm: android.hardwar Tainted: G S W O 4.19.157+ #1 [ 50.506521] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 50.506526] pstate: 60400005 (nZCv daif +PAN -UAO) [ 50.506532] pc : clk_core_unprepare+0x384/0x400 [ 50.506538] lr : clk_core_unprepare+0x384/0x400 [ 50.506542] sp : ffffff8012ee3960 [ 50.506546] x29: ffffff8012ee3960 x28: ffffffc90bd3da80 [ 50.506554] x27: 0000000000000000 x26: 0000000000000068 [ 50.506561] x25: ffffffa50a9272a8 x24: ffffffa50bf510fa [ 50.506569] x23: ffffffa50bf51082 x22: ffffffc944fb8a80 [ 50.506577] x21: ffffffa50e178000 x20: ffffffa50e178000 [ 50.506584] x19: ffffffc94c564c80 x18: 0000000000000034 [ 50.506592] x17: ffffffa50d8f4000 x16: 00000000fffb4094 [ 50.506600] x15: 00000000000b4094 x14: 00000000000000c2 [ 50.506607] x13: 0000000000000004 x12: 0000000039b76e8b [ 50.506615] x11: 0000000000000015 x10: 000000000682aaab [ 50.506623] x9 : 450514ed24766500 x8 : 450514ed24766500 [ 50.506630] x7 : ffffffa509d82700 x6 : 0000000000000000 [ 50.506638] x5 : 0000000000000080 x4 : 0000000000000001 [ 50.506646] x3 : ffffff8012ee3588 x2 : 0000000000000007 [ 50.506653] x1 : ffffffa509d82874 x0 : 0000000000000023 [ 50.506661] Call trace: [ 50.506666] clk_core_unprepare+0x384/0x400 [ 50.506672] clk_unprepare+0x88/0x108 [ 50.506677] cam_soc_util_clk_disable+0x54/0x68 [ 50.506683] cam_sensor_util_power_down+0x258/0x4b8 [ 50.506688] cam_sensor_power_down+0x34/0x130 [ 50.506693] cam_sensor_driver_cmd+0x35c/0x12e0 [ 50.506699] cam_sensor_subdev_ioctl+0x3c/0x80 [ 50.506705] subdev_do_ioctl_lock+0x764/0xbc8 [ 50.506709] video_usercopy+0x38c/0x850 [ 50.506715] subdev_ioctl+0x38/0x48 [ 50.506720] v4l2_ioctl+0x6c/0x80 [ 50.506727] do_vfs_ioctl+0x748/0x1210 [ 50.506732] __arm64_sys_ioctl+0x78/0xa0 [ 50.506738] el0_svc_common+0xa4/0x190 [ 50.506743] el0_svc_handler+0x6c/0x88 [ 50.506748] el0_svc+0x8/0xc [ 50.506752] irq event stamp: 293274 [ 50.506758] hardirqs last enabled at (293273): [] console_unlock+0x4bc/0x568 [ 50.506763] hardirqs last disabled at (293274): [] do_debug_exception+0x84/0x150 [ 50.506768] softirqs last enabled at (292644): [] __do_softirq+0x50c/0x554 [ 50.506773] softirqs last disabled at (292629): [] irq_exit+0xfc/0x120 [ 50.506778] ---[ end trace 1d70a345b84a8705 ]--- [ 50.506934] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor0: Dropping the link to regulator.77 [ 50.510763] CAM_ERR: CAM-UTIL: cam_soc_util_regulator_disable: 1415 Invalid NULL parameter [ 50.510806] CAM_ERR: CAM-SENSOR: cam_sensor_util_power_down: 2290 Reg: cam_vio disable failed [ 50.510847] CAM_ERR: CAM-UTIL: cam_soc_util_regulator_disable: 1415 Invalid NULL parameter [ 50.510869] CAM_ERR: CAM-SENSOR: cam_sensor_util_power_down: 2290 Reg: cam_vana disable failed [ 50.513911] type=1400 audit(11201.687:20): avc: denied { write } for comm="mkdir" name="uncompressed" dev="configfs" ino=45418 scontext=u:r:vendor_qti_init_shell:s0 tcontext=u:object_r:configfs:s0 tclass=dir permissive=0 [ 50.514483] ------------[ cut here ]------------ [ 50.515892] unbalanced disables for titan_top_gdsc [ 50.515915] WARNING: CPU: 4 PID: 848 at drivers/regulator/core.c:2401 _regulator_disable+0x1a0/0x1b0 [ 50.515918] Modules linked in: machine_dlkm(O) wcd938x_slave_dlkm(O) wcd938x_dlkm(O) wcd9xxx_dlkm(O) mbhc_dlkm(O) tx_macro_dlkm(O) rx_macro_dlkm(O) va_macro_dlkm(O) wsa_macro_dlkm(O) swr_ctrl_dlkm(O) bolero_cdc_dlkm(O) wsa881x_dlkm(O) wcd_core_dlkm(O) stub_dlkm(O) hdmi_dlkm(O) swr_dlkm(O) pinctrl_lpi_dlkm(O) pinctrl_wcd_dlkm(O) usf_dlkm(O) native_dlkm(O) platform_dlkm(O) q6_dlkm(O) adsp_loader_dlkm(O) apr_dlkm(O) snd_event_dlkm(O) q6_notifier_dlkm(O) q6_pdr_dlkm(O) msm_11ad_proxy [ 50.515950] CPU: 4 PID: 848 Comm: android.hardwar Tainted: G S W O 4.19.157+ #1 [ 50.515954] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 50.515957] pstate: 60400005 (nZCv daif +PAN -UAO) [ 50.515961] pc : _regulator_disable+0x1a0/0x1b0 [ 50.515965] lr : _regulator_disable+0x19c/0x1b0 [ 50.515968] sp : ffffff8012ee33d0 [ 50.515971] x29: ffffff8012ee33d0 x28: 0000000000000000 [ 50.515977] x27: 0000007fc45213c0 x26: ffffffc944c9c000 [ 50.515982] x25: ffffffa50a9272a8 x24: ffffffc914d13c40 [ 50.515988] x23: ffffffc944c9ed18 x22: ffffffc944ca5bf0 [ 50.515994] x21: ffffffc94c4549a8 x20: 00000000fffffffb [ 50.515999] x19: ffffffc94c454880 x18: 0000000000000038 [ 50.516005] x17: ffffffa50d8f4000 x16: 00000000fffb30ec [ 50.516011] x15: 00000000000b30ec x14: 00000000000000c2 [ 50.516016] x13: 0000000000000004 x12: 0000000039ba3134 [ 50.516022] x11: 0000000000000015 x10: 000000000682aaab [ 50.516027] x9 : 450514ed24766500 x8 : 450514ed24766500 [ 50.516033] x7 : ffffffa509d82700 x6 : 0000000000000000 [ 50.516038] x5 : 0000000000000080 x4 : 0000000000000001 [ 50.516043] x3 : ffffff8012ee2ff8 x2 : 0000000000000007 [ 50.516049] x1 : ffffffa509d82874 x0 : 0000000000000026 [ 50.516054] Call trace: [ 50.516058] _regulator_disable+0x1a0/0x1b0 [ 50.516062] regulator_disable+0x3c/0x88 [ 50.516067] cam_soc_util_disable_platform_resource+0xb0/0x100 [ 50.516072] cam_cpas_soc_disable_resources+0x30/0x78 [ 50.516075] cam_cpas_hw_stop+0x2a0/0x4e0 [ 50.516079] cam_cpas_stop+0x58/0x110 [ 50.516084] cam_cci_soc_release+0x110/0x1a0 [ 50.516087] cam_cci_core_cfg+0x14c/0x15e8 [ 50.516091] cam_cci_subdev_ioctl+0x50/0xc0 [ 50.516094] cam_sensor_cci_i2c_util+0x60/0xd0 [ 50.516098] camera_io_release+0x38/0x88 [ 50.516102] cam_sensor_power_down+0x64/0x130 [ 50.516105] cam_sensor_driver_cmd+0x35c/0x12e0 [ 50.516109] cam_sensor_subdev_ioctl+0x3c/0x80 [ 50.516115] subdev_do_ioctl_lock+0x764/0xbc8 [ 50.516119] video_usercopy+0x38c/0x850 [ 50.516122] subdev_ioctl+0x38/0x48 [ 50.516127] v4l2_ioctl+0x6c/0x80 [ 50.516133] do_vfs_ioctl+0x748/0x1210 [ 50.516137] __arm64_sys_ioctl+0x78/0xa0 [ 50.516142] el0_svc_common+0xa4/0x190 [ 50.516146] el0_svc_handler+0x6c/0x88 [ 50.516149] el0_svc+0x8/0xc [ 50.516153] irq event stamp: 293556 [ 50.516158] hardirqs last enabled at (293555): [] console_unlock+0x4bc/0x568 [ 50.516161] hardirqs last disabled at (293556): [] do_debug_exception+0x84/0x150 [ 50.516165] softirqs last enabled at (292644): [] __do_softirq+0x50c/0x554 [ 50.516169] softirqs last disabled at (292629): [] irq_exit+0xfc/0x120 [ 50.516172] ---[ end trace 1d70a345b84a8706 ]--- [ 50.542009] type=1400 audit(11201.719:21): avc: denied { write } for comm="mkdir" name="uncompressed" dev="configfs" ino=45418 scontext=u:r:vendor_qti_init_shell:s0 tcontext=u:object_r:configfs:s0 tclass=dir permissive=0 [ 50.546742] qcom,camera ac50000.qcom,cci:qcom,cam-sensor3: Linked as a consumer to regulator.86 [ 50.550570] qcom,camera ac50000.qcom,cci:qcom,cam-sensor3: Linked as a consumer to regulator.57 [ 50.551128] qcom,camera ac50000.qcom,cci:qcom,cam-sensor3: Linked as a consumer to regulator.77 [ 50.579165] CAM_ERR: CAM-CCI: cam_cci_irq: 264 Base:ffffff80197f5000, M1_Q1 NACK ERROR: 0x40000000 [ 50.579371] CAM_ERR: CAM-CCI: cam_cci_read: 1306 ERROR with Slave 0xc0: [ 50.579388] CAM_ERR: CAM-CCI: cam_cci_read_bytes: 1561 failed to read rc:-22 [ 50.579400] CAM_ERR: CAM-SENSOR: cam_cci_i2c_read: 35 rc = -22 [ 50.579405] CAM_WARN: CAM-SENSOR: cam_sensor_match_id: 769 read id: 0x0 expected id 0x9281: [ 50.579559] qcom,camera ac50000.qcom,cci:qcom,cam-sensor3: Dropping the link to regulator.77 [ 50.583825] qcom,camera ac50000.qcom,cci:qcom,cam-sensor3: Dropping the link to regulator.57 [ 50.584061] qcom,camera ac50000.qcom,cci:qcom,cam-sensor3: Dropping the link to regulator.86 [ 50.610340] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor0: Linked as a consumer to regulator.55 [ 50.615577] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor0: Linked as a consumer to regulator.57 [ 50.618400] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor0: Linked as a consumer to regulator.77 [ 50.618415] CAM_ERR: CAM-UTIL: cam_soc_util_regulator_enable: 1459 cam_clk set voltage failed [ 50.618422] CAM_ERR: CAM-SENSOR: cam_sensor_core_power_up: 1928 Reg enable failed [ 50.618428] CAM_ERR: CAM-SENSOR: cam_sensor_core_power_up: 2062 failed [ 50.618574] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor0: Dropping the link to regulator.57 [ 50.620354] CAM_ERR: CAM-SENSOR: cam_sensor_core_power_up: 2131 seq_val:100 > num_vreg: 4 [ 50.622733] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor0: Dropping the link to regulator.55 [ 50.627162] CAM_ERR: CAM-CCI: cam_cci_irq: 238 Base:ffffff80195fd000, M0_Q1 NACK ERROR: 0x10000000 [ 50.627337] CAM_ERR: CAM-CCI: cam_cci_read: 1306 ERROR with Slave 0x34: [ 50.627350] CAM_ERR: CAM-CCI: cam_cci_read_bytes: 1561 failed to read rc:-22 [ 50.627360] CAM_ERR: CAM-SENSOR: cam_cci_i2c_read: 35 rc = -22 [ 50.627369] CAM_WARN: CAM-SENSOR: cam_sensor_match_id: 769 read id: 0x0 expected id 0x563: [ 50.629426] ------------[ cut here ]------------ [ 50.629431] cam_cc_mclk0_clk already disabled [ 50.629454] WARNING: CPU: 4 PID: 848 at drivers/clk/clk.c:1144 clk_core_disable+0x230/0x270 [ 50.629457] Modules linked in: machine_dlkm(O) wcd938x_slave_dlkm(O) wcd938x_dlkm(O) wcd9xxx_dlkm(O) mbhc_dlkm(O) tx_macro_dlkm(O) rx_macro_dlkm(O) va_macro_dlkm(O) wsa_macro_dlkm(O) swr_ctrl_dlkm(O) bolero_cdc_dlkm(O) wsa881x_dlkm(O) wcd_core_dlkm(O) stub_dlkm(O) hdmi_dlkm(O) swr_dlkm(O) pinctrl_lpi_dlkm(O) pinctrl_wcd_dlkm(O) usf_dlkm(O) native_dlkm(O) platform_dlkm(O) q6_dlkm(O) adsp_loader_dlkm(O) apr_dlkm(O) snd_event_dlkm(O) q6_notifier_dlkm(O) q6_pdr_dlkm(O) msm_11ad_proxy [ 50.629490] CPU: 4 PID: 848 Comm: android.hardwar Tainted: G S W O 4.19.157+ #1 [ 50.629492] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 50.629494] pstate: 60400085 (nZCv daIf +PAN -UAO) [ 50.629497] pc : clk_core_disable+0x230/0x270 [ 50.629500] lr : clk_core_disable+0x230/0x270 [ 50.629502] sp : ffffff8012ee3970 [ 50.629504] x29: ffffff8012ee3970 x28: ffffffc90bd39e80 [ 50.629506] x27: 0000000000000001 x26: 0000000000000068 [ 50.629509] x25: ffffffa50a9272a8 x24: ffffffa50bf510fa [ 50.629512] x23: ffffffa50bf51082 x22: ffffffc944fb8a80 [ 50.629514] x21: 0000000000000000 x20: ffffffc94c564c80 [ 50.629517] x19: ffffffc94c564c80 x18: 0000000000000034 [ 50.629519] x17: ffffffa50d8f4000 x16: 00000000fffb1618 [ 50.629522] x15: 00000000000b1618 x14: 00000000000000c2 [ 50.629525] x13: 0000000000000000 x12: 00000000000000e0 [ 50.629527] x11: 0000000000000000 x10: 0000000000000001 [ 50.629530] x9 : 450514ed24766500 x8 : 450514ed24766500 [ 50.629533] x7 : ffffffa509d82700 x6 : 0000000000000000 [ 50.629535] x5 : 0000000000000080 x4 : 0000000000000001 [ 50.629538] x3 : 0000000000000000 x2 : 0000000000000007 [ 50.629540] x1 : 0000000000000007 x0 : 0000000000000021 [ 50.629544] Call trace: [ 50.629547] clk_core_disable+0x230/0x270 [ 50.629549] clk_disable+0x34/0x98 [ 50.629554] cam_soc_util_clk_disable+0x4c/0x68 [ 50.629557] cam_sensor_util_power_down+0x258/0x4b8 [ 50.629559] cam_sensor_power_down+0x34/0x130 [ 50.629562] cam_sensor_driver_cmd+0x35c/0x12e0 [ 50.629565] cam_sensor_subdev_ioctl+0x3c/0x80 [ 50.629569] subdev_do_ioctl_lock+0x764/0xbc8 [ 50.629572] video_usercopy+0x38c/0x850 [ 50.629574] subdev_ioctl+0x38/0x48 [ 50.629579] v4l2_ioctl+0x6c/0x80 [ 50.629583] do_vfs_ioctl+0x748/0x1210 [ 50.629586] __arm64_sys_ioctl+0x78/0xa0 [ 50.629590] el0_svc_common+0xa4/0x190 [ 50.629592] el0_svc_handler+0x6c/0x88 [ 50.629595] el0_svc+0x8/0xc [ 50.629597] irq event stamp: 301712 [ 50.629602] hardirqs last enabled at (301711): [] _raw_spin_unlock_irq+0x34/0x68 [ 50.629604] hardirqs last disabled at (301712): [] clk_enable_lock+0x20/0xc8 [ 50.629607] softirqs last enabled at (300104): [] __do_softirq+0x50c/0x554 [ 50.629610] softirqs last disabled at (300079): [] irq_exit+0xfc/0x120 [ 50.629611] ---[ end trace 1d70a345b84a8707 ]--- [ 50.629617] ------------[ cut here ]------------ [ 50.629624] cam_cc_mclk0_clk already unprepared [ 50.629638] WARNING: CPU: 4 PID: 848 at drivers/clk/clk.c:981 clk_core_unprepare+0x384/0x400 [ 50.629642] Modules linked in: machine_dlkm(O) wcd938x_slave_dlkm(O) wcd938x_dlkm(O) wcd9xxx_dlkm(O) mbhc_dlkm(O) tx_macro_dlkm(O) rx_macro_dlkm(O) va_macro_dlkm(O) wsa_macro_dlkm(O) swr_ctrl_dlkm(O) bolero_cdc_dlkm(O) wsa881x_dlkm(O) wcd_core_dlkm(O) stub_dlkm(O) hdmi_dlkm(O) swr_dlkm(O) pinctrl_lpi_dlkm(O) pinctrl_wcd_dlkm(O) usf_dlkm(O) native_dlkm(O) platform_dlkm(O) q6_dlkm(O) adsp_loader_dlkm(O) apr_dlkm(O) snd_event_dlkm(O) q6_notifier_dlkm(O) q6_pdr_dlkm(O) msm_11ad_proxy [ 50.629660] CPU: 4 PID: 848 Comm: android.hardwar Tainted: G S W O 4.19.157+ #1 [ 50.629663] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 50.629666] pstate: 60400005 (nZCv daif +PAN -UAO) [ 50.629670] pc : clk_core_unprepare+0x384/0x400 [ 50.629674] lr : clk_core_unprepare+0x384/0x400 [ 50.629676] sp : ffffff8012ee3960 [ 50.629679] x29: ffffff8012ee3960 x28: ffffffc90bd39e80 [ 50.629684] x27: 0000000000000001 x26: 0000000000000068 [ 50.629690] x25: ffffffa50a9272a8 x24: ffffffa50bf510fa [ 50.629695] x23: ffffffa50bf51082 x22: ffffffc944fb8a80 [ 50.629700] x21: ffffffa50e178000 x20: ffffffa50e178000 [ 50.629705] x19: ffffffc94c564c80 x18: 0000000000000034 [ 50.629710] x17: ffffffa50d8f4000 x16: 00000000fffb0984 [ 50.629715] x15: 00000000000b0984 x14: 00000000000000c2 [ 50.629720] x13: 0000000000000004 x12: 0000000039db8336 [ 50.629725] x11: 0000000000000015 x10: 000000000682aaab [ 50.629730] x9 : 450514ed24766500 x8 : 450514ed24766500 [ 50.629735] x7 : ffffffa509d82700 x6 : 0000000000000000 [ 50.629740] x5 : 0000000000000080 x4 : 0000000000000001 [ 50.629745] x3 : ffffff8012ee3588 x2 : 0000000000000007 [ 50.629750] x1 : ffffffa509d82874 x0 : 0000000000000023 [ 50.629755] Call trace: [ 50.629759] clk_core_unprepare+0x384/0x400 [ 50.629762] clk_unprepare+0x88/0x108 [ 50.629766] cam_soc_util_clk_disable+0x54/0x68 [ 50.629769] cam_sensor_util_power_down+0x258/0x4b8 [ 50.629773] cam_sensor_power_down+0x34/0x130 [ 50.629776] cam_sensor_driver_cmd+0x35c/0x12e0 [ 50.629780] cam_sensor_subdev_ioctl+0x3c/0x80 [ 50.629784] subdev_do_ioctl_lock+0x764/0xbc8 [ 50.629787] video_usercopy+0x38c/0x850 [ 50.629790] subdev_ioctl+0x38/0x48 [ 50.629795] v4l2_ioctl+0x6c/0x80 [ 50.629799] do_vfs_ioctl+0x748/0x1210 [ 50.629802] __arm64_sys_ioctl+0x78/0xa0 [ 50.629806] el0_svc_common+0xa4/0x190 [ 50.629809] el0_svc_handler+0x6c/0x88 [ 50.629813] el0_svc+0x8/0xc [ 50.629816] irq event stamp: 301726 [ 50.629821] hardirqs last enabled at (301725): [] console_unlock+0x4bc/0x568 [ 50.629824] hardirqs last disabled at (301726): [] do_debug_exception+0x84/0x150 [ 50.629827] softirqs last enabled at (300104): [] __do_softirq+0x50c/0x554 [ 50.629831] softirqs last disabled at (300079): [] irq_exit+0xfc/0x120 [ 50.629834] ---[ end trace 1d70a345b84a8708 ]--- [ 50.629954] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor0: Dropping the link to regulator.77 [ 50.631219] CAM_ERR: CAM-UTIL: cam_soc_util_regulator_disable: 1415 Invalid NULL parameter [ 50.631228] CAM_ERR: CAM-SENSOR: cam_sensor_util_power_down: 2290 Reg: cam_vio disable failed [ 50.631238] CAM_ERR: CAM-UTIL: cam_soc_util_regulator_disable: 1415 Invalid NULL parameter [ 50.631247] CAM_ERR: CAM-SENSOR: cam_sensor_util_power_down: 2290 Reg: cam_vana disable failed [ 50.632100] ------------[ cut here ]------------ [ 50.632105] unbalanced disables for titan_top_gdsc [ 50.632120] WARNING: CPU: 7 PID: 848 at drivers/regulator/core.c:2401 _regulator_disable+0x1a0/0x1b0 [ 50.632123] Modules linked in: machine_dlkm(O) wcd938x_slave_dlkm(O) wcd938x_dlkm(O) wcd9xxx_dlkm(O) mbhc_dlkm(O) tx_macro_dlkm(O) rx_macro_dlkm(O) va_macro_dlkm(O) wsa_macro_dlkm(O) swr_ctrl_dlkm(O) bolero_cdc_dlkm(O) wsa881x_dlkm(O) wcd_core_dlkm(O) stub_dlkm(O) hdmi_dlkm(O) swr_dlkm(O) pinctrl_lpi_dlkm(O) pinctrl_wcd_dlkm(O) usf_dlkm(O) native_dlkm(O) platform_dlkm(O) q6_dlkm(O) adsp_loader_dlkm(O) apr_dlkm(O) snd_event_dlkm(O) q6_notifier_dlkm(O) q6_pdr_dlkm(O) msm_11ad_proxy [ 50.632141] CPU: 7 PID: 848 Comm: android.hardwar Tainted: G S W O 4.19.157+ #1 [ 50.632144] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 50.632147] pstate: 60400005 (nZCv daif +PAN -UAO) [ 50.632150] pc : _regulator_disable+0x1a0/0x1b0 [ 50.632153] lr : _regulator_disable+0x19c/0x1b0 [ 50.632155] sp : ffffff8012ee33d0 [ 50.632158] x29: ffffff8012ee33d0 x28: 0000000000000000 [ 50.632162] x27: 0000007fc45213c0 x26: ffffffc944c9c000 [ 50.632167] x25: ffffffa50a9272a8 x24: ffffffc914d13c40 [ 50.632171] x23: ffffffc944c9ed18 x22: ffffffc944ca5bf0 [ 50.632176] x21: ffffffc94c4549a8 x20: 00000000fffffffb [ 50.632180] x19: ffffffc94c454880 x18: 0000000000000038 [ 50.632185] x17: ffffffa50d8f4000 x16: 00000000fffafabc [ 50.632189] x15: 00000000000afabc x14: 00000000000000c2 [ 50.632193] x13: 0000000000000004 x12: 0000000039dc3d28 [ 50.632198] x11: 0000000000000015 x10: 000000000682aaab [ 50.632202] x9 : 450514ed24766500 x8 : 450514ed24766500 [ 50.632207] x7 : ffffffa509d82700 x6 : 0000000000000000 [ 50.632211] x5 : 0000000000000080 x4 : 0000000000000001 [ 50.632215] x3 : ffffff8012ee2ff8 x2 : ffffffa509c97b48 [ 50.632220] x1 : ffffffa509d82874 x0 : 0000000000000026 [ 50.632224] Call trace: [ 50.632227] _regulator_disable+0x1a0/0x1b0 [ 50.632230] regulator_disable+0x3c/0x88 [ 50.632234] cam_soc_util_disable_platform_resource+0xb0/0x100 [ 50.632238] cam_cpas_soc_disable_resources+0x30/0x78 [ 50.632241] cam_cpas_hw_stop+0x2a0/0x4e0 [ 50.632244] cam_cpas_stop+0x58/0x110 [ 50.632248] cam_cci_soc_release+0x110/0x1a0 [ 50.632250] cam_cci_core_cfg+0x14c/0x15e8 [ 50.632253] cam_cci_subdev_ioctl+0x50/0xc0 [ 50.632256] cam_sensor_cci_i2c_util+0x60/0xd0 [ 50.632259] camera_io_release+0x38/0x88 [ 50.632262] cam_sensor_power_down+0x64/0x130 [ 50.632265] cam_sensor_driver_cmd+0x35c/0x12e0 [ 50.632268] cam_sensor_subdev_ioctl+0x3c/0x80 [ 50.632272] subdev_do_ioctl_lock+0x764/0xbc8 [ 50.632275] video_usercopy+0x38c/0x850 [ 50.632278] subdev_ioctl+0x38/0x48 [ 50.632281] v4l2_ioctl+0x6c/0x80 [ 50.632285] do_vfs_ioctl+0x748/0x1210 [ 50.632288] __arm64_sys_ioctl+0x78/0xa0 [ 50.632292] el0_svc_common+0xa4/0x190 [ 50.632295] el0_svc_handler+0x6c/0x88 [ 50.632298] el0_svc+0x8/0xc [ 50.632300] irq event stamp: 301990 [ 50.632304] hardirqs last enabled at (301989): [] console_unlock+0x4bc/0x568 [ 50.632307] hardirqs last disabled at (301990): [] do_debug_exception+0x84/0x150 [ 50.632309] softirqs last enabled at (300104): [] __do_softirq+0x50c/0x554 [ 50.632313] softirqs last disabled at (300079): [] irq_exit+0xfc/0x120 [ 50.632315] ---[ end trace 1d70a345b84a8709 ]--- [ 50.660741] qcom,camera ac50000.qcom,cci:qcom,cam-sensor6: Linked as a consumer to regulator.56 [ 50.663827] qcom,camera ac50000.qcom,cci:qcom,cam-sensor6: Linked as a consumer to regulator.54 [ 50.667396] qcom,camera ac50000.qcom,cci:qcom,cam-sensor6: Linked as a consumer to regulator.57 [ 50.667982] qcom,camera ac50000.qcom,cci:qcom,cam-sensor6: Linked as a consumer to regulator.77 [ 50.694099] CAM_ERR: CAM-CCI: cam_cci_irq: 238 Base:ffffff80197f5000, M0_Q1 NACK ERROR: 0x10000000 [ 50.695677] CAM_ERR: CAM-CCI: cam_cci_read: 1306 ERROR with Slave 0xc0: [ 50.695695] CAM_ERR: CAM-CCI: cam_cci_read_bytes: 1561 failed to read rc:-22 [ 50.695707] CAM_ERR: CAM-SENSOR: cam_cci_i2c_read: 35 rc = -22 [ 50.695715] CAM_WARN: CAM-SENSOR: cam_sensor_match_id: 769 read id: 0x0 expected id 0x9281: [ 50.695894] qcom,camera ac50000.qcom,cci:qcom,cam-sensor6: Dropping the link to regulator.77 [ 50.700167] qcom,camera ac50000.qcom,cci:qcom,cam-sensor6: Dropping the link to regulator.57 [ 50.700381] qcom,camera ac50000.qcom,cci:qcom,cam-sensor6: Dropping the link to regulator.54 [ 50.700534] qcom,camera ac50000.qcom,cci:qcom,cam-sensor6: Dropping the link to regulator.56 [ 50.728925] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor1: Linked as a consumer to regulator.56 [ 50.731727] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor1: Linked as a consumer to regulator.53 [ 50.735166] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor1: Linked as a consumer to regulator.57 [ 50.736703] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor1: Linked as a consumer to regulator.77 [ 50.755801] msm-dcc 1023000.dcc_v2: DCC is not ready Disabling DCC... [ 50.762596] CAM_ERR: CAM-CCI: cam_cci_irq: 264 Base:ffffff80195fd000, M1_Q1 NACK ERROR: 0x40000000 [ 50.763199] CAM_ERR: CAM-CCI: cam_cci_read: 1306 ERROR with Slave 0xc0: [ 50.763212] CAM_ERR: CAM-CCI: cam_cci_read_bytes: 1561 failed to read rc:-22 [ 50.763219] CAM_ERR: CAM-SENSOR: cam_cci_i2c_read: 35 rc = -22 [ 50.763224] CAM_WARN: CAM-SENSOR: cam_sensor_match_id: 769 read id: 0x0 expected id 0x9281: [ 50.763379] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor1: Dropping the link to regulator.77 [ 50.767654] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor1: Dropping the link to regulator.57 [ 50.767823] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor1: Dropping the link to regulator.53 [ 50.767976] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor1: Dropping the link to regulator.56 [ 50.799066] qcom,camera ac50000.qcom,cci:qcom,cam-sensor3: Linked as a consumer to regulator.86 [ 50.802778] qcom,camera ac50000.qcom,cci:qcom,cam-sensor3: Linked as a consumer to regulator.57 [ 50.803528] qcom,camera ac50000.qcom,cci:qcom,cam-sensor3: Linked as a consumer to regulator.77 [ 50.827519] CAM_ERR: CAM-CCI: cam_cci_irq: 264 Base:ffffff80197f5000, M1_Q1 NACK ERROR: 0x40000000 [ 50.827700] CAM_ERR: CAM-CCI: cam_cci_read: 1306 ERROR with Slave 0x20: [ 50.827709] CAM_ERR: CAM-CCI: cam_cci_read_bytes: 1561 failed to read rc:-22 [ 50.827716] CAM_ERR: CAM-SENSOR: cam_cci_i2c_read: 35 rc = -22 [ 50.827722] CAM_WARN: CAM-SENSOR: cam_sensor_match_id: 769 read id: 0x0 expected id 0x9281: [ 50.827899] qcom,camera ac50000.qcom,cci:qcom,cam-sensor3: Dropping the link to regulator.77 [ 50.833748] qcom,camera ac50000.qcom,cci:qcom,cam-sensor3: Dropping the link to regulator.57 [ 50.834023] qcom,camera ac50000.qcom,cci:qcom,cam-sensor3: Dropping the link to regulator.86 [ 50.865779] qcom,camera ac50000.qcom,cci:qcom,cam-sensor2: Linked as a consumer to regulator.56 [ 50.868809] qcom,camera ac50000.qcom,cci:qcom,cam-sensor2: Linked as a consumer to regulator.54 [ 50.871918] qcom,camera ac50000.qcom,cci:qcom,cam-sensor2: Linked as a consumer to regulator.57 [ 50.872700] qcom,camera ac50000.qcom,cci:qcom,cam-sensor2: Linked as a consumer to regulator.77 [ 50.897347] CAM_ERR: CAM-CCI: cam_cci_irq: 238 Base:ffffff80197f5000, M0_Q1 NACK ERROR: 0x10000000 [ 50.897557] CAM_ERR: CAM-CCI: cam_cci_read: 1306 ERROR with Slave 0x20: [ 50.897571] CAM_ERR: CAM-CCI: cam_cci_read_bytes: 1561 failed to read rc:-22 [ 50.897581] CAM_ERR: CAM-SENSOR: cam_cci_i2c_read: 35 rc = -22 [ 50.897591] CAM_WARN: CAM-SENSOR: cam_sensor_match_id: 769 read id: 0x0 expected id 0x9281: [ 50.897782] qcom,camera ac50000.qcom,cci:qcom,cam-sensor2: Dropping the link to regulator.77 [ 50.902120] qcom,camera ac50000.qcom,cci:qcom,cam-sensor2: Dropping the link to regulator.57 [ 50.902326] qcom,camera ac50000.qcom,cci:qcom,cam-sensor2: Dropping the link to regulator.54 [ 50.902518] qcom,camera ac50000.qcom,cci:qcom,cam-sensor2: Dropping the link to regulator.56 [ 50.930709] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor4: Linked as a consumer to regulator.55 [ 50.931667] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor4: Linked as a consumer to regulator.57 [ 50.933488] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor4: Linked as a consumer to regulator.77 [ 50.933502] CAM_ERR: CAM-UTIL: cam_soc_util_regulator_enable: 1459 cam_clk set voltage failed [ 50.933509] CAM_ERR: CAM-SENSOR: cam_sensor_core_power_up: 1928 Reg enable failed [ 50.933515] CAM_ERR: CAM-SENSOR: cam_sensor_core_power_up: 2062 failed [ 50.933662] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor4: Dropping the link to regulator.57 [ 50.933699] CAM_ERR: CAM-SENSOR: cam_sensor_core_power_up: 2131 seq_val:100 > num_vreg: 4 [ 50.933852] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor4: Dropping the link to regulator.55 [ 50.933879] CAM_ERR: CAM-SENSOR: cam_sensor_core_power_up: 2131 seq_val:100 > num_vreg: 4 [ 50.938032] CAM_ERR: CAM-CCI: cam_cci_irq: 238 Base:ffffff80195fd000, M0_Q1 NACK ERROR: 0x10000000 [ 50.938267] CAM_ERR: CAM-CCI: cam_cci_read: 1306 ERROR with Slave 0x34: [ 50.938289] CAM_ERR: CAM-CCI: cam_cci_read_bytes: 1561 failed to read rc:-22 [ 50.938299] CAM_ERR: CAM-SENSOR: cam_cci_i2c_read: 35 rc = -22 [ 50.938306] CAM_WARN: CAM-SENSOR: cam_sensor_match_id: 769 read id: 0x0 expected id 0x586: [ 50.941363] ------------[ cut here ]------------ [ 50.941369] cam_cc_mclk0_clk already disabled [ 50.941393] WARNING: CPU: 4 PID: 848 at drivers/clk/clk.c:1144 clk_core_disable+0x230/0x270 [ 50.941398] Modules linked in: machine_dlkm(O) wcd938x_slave_dlkm(O) wcd938x_dlkm(O) wcd9xxx_dlkm(O) mbhc_dlkm(O) tx_macro_dlkm(O) rx_macro_dlkm(O) va_macro_dlkm(O) wsa_macro_dlkm(O) swr_ctrl_dlkm(O) bolero_cdc_dlkm(O) wsa881x_dlkm(O) wcd_core_dlkm(O) stub_dlkm(O) hdmi_dlkm(O) swr_dlkm(O) pinctrl_lpi_dlkm(O) pinctrl_wcd_dlkm(O) usf_dlkm(O) native_dlkm(O) platform_dlkm(O) q6_dlkm(O) adsp_loader_dlkm(O) apr_dlkm(O) snd_event_dlkm(O) q6_notifier_dlkm(O) q6_pdr_dlkm(O) msm_11ad_proxy [ 50.941446] CPU: 4 PID: 848 Comm: android.hardwar Tainted: G S W O 4.19.157+ #1 [ 50.941449] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 50.941452] pstate: 60400085 (nZCv daIf +PAN -UAO) [ 50.941456] pc : clk_core_disable+0x230/0x270 [ 50.941459] lr : clk_core_disable+0x230/0x270 [ 50.941462] sp : ffffff8012ee3970 [ 50.941464] x29: ffffff8012ee3970 x28: ffffffc90bd3e480 [ 50.941468] x27: 0000000000000001 x26: 0000000000000068 [ 50.941472] x25: ffffffa50a9272a8 x24: ffffffa50bf510fa [ 50.941475] x23: ffffffa50bf51082 x22: ffffffc944fc6100 [ 50.941479] x21: 0000000000000000 x20: ffffffc94c564c80 [ 50.941482] x19: ffffffc94c564c80 x18: 0000000000000034 [ 50.941486] x17: ffffffa50d8f4000 x16: 00000000fffacb34 [ 50.941489] x15: 00000000000acb34 x14: 00000000000000c2 [ 50.941493] x13: 0000000000000000 x12: 00000000000000e0 [ 50.941496] x11: 0000000000000000 x10: 0000000000000001 [ 50.941500] x9 : 450514ed24766500 x8 : 450514ed24766500 [ 50.941503] x7 : ffffffa509d82700 x6 : 0000000000000000 [ 50.941507] x5 : 0000000000000080 x4 : 0000000000000001 [ 50.941510] x3 : 0000000000000000 x2 : 0000000000000007 [ 50.941514] x1 : 0000000000000007 x0 : 0000000000000021 [ 50.941517] Call trace: [ 50.941521] clk_core_disable+0x230/0x270 [ 50.941525] clk_disable+0x34/0x98 [ 50.941530] cam_soc_util_clk_disable+0x4c/0x68 [ 50.941535] cam_sensor_util_power_down+0x258/0x4b8 [ 50.941538] cam_sensor_power_down+0x34/0x130 [ 50.941541] cam_sensor_driver_cmd+0x35c/0x12e0 [ 50.941545] cam_sensor_subdev_ioctl+0x3c/0x80 [ 50.941550] subdev_do_ioctl_lock+0x764/0xbc8 [ 50.941553] video_usercopy+0x38c/0x850 [ 50.941557] subdev_ioctl+0x38/0x48 [ 50.941561] v4l2_ioctl+0x6c/0x80 [ 50.941566] do_vfs_ioctl+0x748/0x1210 [ 50.941570] __arm64_sys_ioctl+0x78/0xa0 [ 50.941574] el0_svc_common+0xa4/0x190 [ 50.941578] el0_svc_handler+0x6c/0x88 [ 50.941581] el0_svc+0x8/0xc [ 50.941584] irq event stamp: 323556 [ 50.941590] hardirqs last enabled at (323555): [] _raw_spin_unlock_irq+0x34/0x68 [ 50.941596] hardirqs last disabled at (323556): [] clk_enable_lock+0x20/0xc8 [ 50.941600] softirqs last enabled at (322320): [] __do_softirq+0x50c/0x554 [ 50.941606] softirqs last disabled at (322291): [] irq_exit+0xfc/0x120 [ 50.941609] ---[ end trace 1d70a345b84a870a ]--- [ 50.941619] ------------[ cut here ]------------ [ 50.941632] cam_cc_mclk0_clk already unprepared [ 50.941662] WARNING: CPU: 4 PID: 848 at drivers/clk/clk.c:981 clk_core_unprepare+0x384/0x400 [ 50.941670] Modules linked in: machine_dlkm(O) wcd938x_slave_dlkm(O) wcd938x_dlkm(O) wcd9xxx_dlkm(O) mbhc_dlkm(O) tx_macro_dlkm(O) rx_macro_dlkm(O) va_macro_dlkm(O) wsa_macro_dlkm(O) swr_ctrl_dlkm(O) bolero_cdc_dlkm(O) wsa881x_dlkm(O) wcd_core_dlkm(O) stub_dlkm(O) hdmi_dlkm(O) swr_dlkm(O) pinctrl_lpi_dlkm(O) pinctrl_wcd_dlkm(O) usf_dlkm(O) native_dlkm(O) platform_dlkm(O) q6_dlkm(O) adsp_loader_dlkm(O) apr_dlkm(O) snd_event_dlkm(O) q6_notifier_dlkm(O) q6_pdr_dlkm(O) msm_11ad_proxy [ 50.941718] CPU: 4 PID: 848 Comm: android.hardwar Tainted: G S W O 4.19.157+ #1 [ 50.941726] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 50.941735] pstate: 60400005 (nZCv daif +PAN -UAO) [ 50.941745] pc : clk_core_unprepare+0x384/0x400 [ 50.941755] lr : clk_core_unprepare+0x384/0x400 [ 50.941763] sp : ffffff8012ee3960 [ 50.941771] x29: ffffff8012ee3960 x28: ffffffc90bd3e480 [ 50.941785] x27: 0000000000000001 x26: 0000000000000068 [ 50.941798] x25: ffffffa50a9272a8 x24: ffffffa50bf510fa [ 50.941805] x23: ffffffa50bf51082 x22: ffffffc944fc6100 [ 50.941812] x21: ffffffa50e178000 x20: ffffffa50e178000 [ 50.941819] x19: ffffffc94c564c80 x18: 0000000000000034 [ 50.941827] x17: ffffffa50d8f4000 x16: 00000000fffabea0 [ 50.941834] x15: 00000000000abea0 x14: 00000000000000c2 [ 50.941841] x13: 0000000000000004 x12: 000000003a36ec12 [ 50.941848] x11: 0000000000000015 x10: 000000000682aaab [ 50.941855] x9 : 450514ed24766500 x8 : 450514ed24766500 [ 50.941862] x7 : ffffffa509d82700 x6 : 0000000000000000 [ 50.941869] x5 : 0000000000000080 x4 : 0000000000000001 [ 50.941876] x3 : ffffff8012ee3588 x2 : 0000000000000007 [ 50.941883] x1 : ffffffa509d82874 x0 : 0000000000000023 [ 50.941891] Call trace: [ 50.941896] clk_core_unprepare+0x384/0x400 [ 50.941901] clk_unprepare+0x88/0x108 [ 50.941906] cam_soc_util_clk_disable+0x54/0x68 [ 50.941911] cam_sensor_util_power_down+0x258/0x4b8 [ 50.941917] cam_sensor_power_down+0x34/0x130 [ 50.941922] cam_sensor_driver_cmd+0x35c/0x12e0 [ 50.941927] cam_sensor_subdev_ioctl+0x3c/0x80 [ 50.941933] subdev_do_ioctl_lock+0x764/0xbc8 [ 50.941937] video_usercopy+0x38c/0x850 [ 50.941943] subdev_ioctl+0x38/0x48 [ 50.941949] v4l2_ioctl+0x6c/0x80 [ 50.941955] do_vfs_ioctl+0x748/0x1210 [ 50.941960] __arm64_sys_ioctl+0x78/0xa0 [ 50.941965] el0_svc_common+0xa4/0x190 [ 50.941970] el0_svc_handler+0x6c/0x88 [ 50.941979] el0_svc+0x8/0xc [ 50.941983] irq event stamp: 323570 [ 50.941989] hardirqs last enabled at (323569): [] console_unlock+0x4bc/0x568 [ 50.941994] hardirqs last disabled at (323570): [] do_debug_exception+0x84/0x150 [ 50.941999] softirqs last enabled at (322320): [] __do_softirq+0x50c/0x554 [ 50.942004] softirqs last disabled at (322291): [] irq_exit+0xfc/0x120 [ 50.942008] ---[ end trace 1d70a345b84a870b ]--- [ 50.942162] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor4: Dropping the link to regulator.77 [ 50.942206] CAM_ERR: CAM-UTIL: cam_soc_util_regulator_disable: 1415 Invalid NULL parameter [ 50.942212] CAM_ERR: CAM-SENSOR: cam_sensor_util_power_down: 2290 Reg: cam_vio disable failed [ 50.942219] CAM_ERR: CAM-UTIL: cam_soc_util_regulator_disable: 1415 Invalid NULL parameter [ 50.942224] CAM_ERR: CAM-SENSOR: cam_sensor_util_power_down: 2290 Reg: cam_vana disable failed [ 50.942764] ------------[ cut here ]------------ [ 50.942776] unbalanced disables for titan_top_gdsc [ 50.942805] WARNING: CPU: 4 PID: 848 at drivers/regulator/core.c:2401 _regulator_disable+0x1a0/0x1b0 [ 50.942813] Modules linked in: machine_dlkm(O) wcd938x_slave_dlkm(O) wcd938x_dlkm(O) wcd9xxx_dlkm(O) mbhc_dlkm(O) tx_macro_dlkm(O) rx_macro_dlkm(O) va_macro_dlkm(O) wsa_macro_dlkm(O) swr_ctrl_dlkm(O) bolero_cdc_dlkm(O) wsa881x_dlkm(O) wcd_core_dlkm(O) stub_dlkm(O) hdmi_dlkm(O) swr_dlkm(O) pinctrl_lpi_dlkm(O) pinctrl_wcd_dlkm(O) usf_dlkm(O) native_dlkm(O) platform_dlkm(O) q6_dlkm(O) adsp_loader_dlkm(O) apr_dlkm(O) snd_event_dlkm(O) q6_notifier_dlkm(O) q6_pdr_dlkm(O) msm_11ad_proxy [ 50.942860] CPU: 4 PID: 848 Comm: android.hardwar Tainted: G S W O 4.19.157+ #1 [ 50.942868] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 50.942877] pstate: 60400005 (nZCv daif +PAN -UAO) [ 50.942885] pc : _regulator_disable+0x1a0/0x1b0 [ 50.942894] lr : _regulator_disable+0x19c/0x1b0 [ 50.942901] sp : ffffff8012ee33d0 [ 50.942909] x29: ffffff8012ee33d0 x28: 0000000000000000 [ 50.942922] x27: 0000007fc45213c0 x26: ffffffc944c9c000 [ 50.942936] x25: ffffffa50a9272a8 x24: ffffffc914d14b40 [ 50.942949] x23: ffffffc944c9ed18 x22: ffffffc944ca5bf0 [ 50.942962] x21: ffffffc94c4549a8 x20: 00000000fffffffb [ 50.942975] x19: ffffffc94c454880 x18: 0000000000000038 [ 50.942988] x17: ffffffa50d8f4000 x16: 00000000fffaafd8 [ 50.943002] x15: 00000000000aafd8 x14: 00000000000000c2 [ 50.943015] x13: 0000000000000004 x12: 000000003a3741d6 [ 50.943028] x11: 0000000000000015 x10: 000000000682aaab [ 50.943041] x9 : 450514ed24766500 x8 : 450514ed24766500 [ 50.943054] x7 : ffffffa509d82700 x6 : 0000000000000000 [ 50.943068] x5 : 0000000000000080 x4 : 0000000000000001 [ 50.943081] x3 : ffffff8012ee2ff8 x2 : 0000000000000007 [ 50.943094] x1 : ffffffa509d82874 x0 : 0000000000000026 [ 50.943107] Call trace: [ 50.943116] _regulator_disable+0x1a0/0x1b0 [ 50.943124] regulator_disable+0x3c/0x88 [ 50.943134] cam_soc_util_disable_platform_resource+0xb0/0x100 [ 50.943143] cam_cpas_soc_disable_resources+0x30/0x78 [ 50.943152] cam_cpas_hw_stop+0x2a0/0x4e0 [ 50.943160] cam_cpas_stop+0x58/0x110 [ 50.943169] cam_cci_soc_release+0x110/0x1a0 [ 50.943177] cam_cci_core_cfg+0x14c/0x15e8 [ 50.943185] cam_cci_subdev_ioctl+0x50/0xc0 [ 50.943194] cam_sensor_cci_i2c_util+0x60/0xd0 [ 50.943203] camera_io_release+0x38/0x88 [ 50.943211] cam_sensor_power_down+0x64/0x130 [ 50.943220] cam_sensor_driver_cmd+0x35c/0x12e0 [ 50.943230] cam_sensor_subdev_ioctl+0x3c/0x80 [ 50.943240] subdev_do_ioctl_lock+0x764/0xbc8 [ 50.943248] video_usercopy+0x38c/0x850 [ 50.943258] subdev_ioctl+0x38/0x48 [ 50.943268] v4l2_ioctl+0x6c/0x80 [ 50.943278] do_vfs_ioctl+0x748/0x1210 [ 50.943288] __arm64_sys_ioctl+0x78/0xa0 [ 50.943297] el0_svc_common+0xa4/0x190 [ 50.943307] el0_svc_handler+0x6c/0x88 [ 50.943316] el0_svc+0x8/0xc [ 50.943324] irq event stamp: 323830 [ 50.943333] hardirqs last enabled at (323829): [] console_unlock+0x4bc/0x568 [ 50.943342] hardirqs last disabled at (323830): [] do_debug_exception+0x84/0x150 [ 50.943351] softirqs last enabled at (322320): [] __do_softirq+0x50c/0x554 [ 50.943360] softirqs last disabled at (322291): [] irq_exit+0xfc/0x120 [ 50.943368] ---[ end trace 1d70a345b84a870c ]--- [ 50.975735] qcom,camera ac50000.qcom,cci:qcom,cam-sensor2: Linked as a consumer to regulator.57 [ 50.977189] qcom,camera ac50000.qcom,cci:qcom,cam-sensor2: Linked as a consumer to regulator.56 [ 50.978686] qcom,camera ac50000.qcom,cci:qcom,cam-sensor2: Linked as a consumer to regulator.54 [ 51.005947] qcom,camera ac50000.qcom,cci:qcom,cam-sensor2: Linked as a consumer to regulator.77 [ 51.012793] msm-dcc 1023000.dcc_v2: DCC list passed 3 [ 51.018293] msm-dcc 1023000.dcc_v2: All values written to enable. [ 51.018531] msm-dcc 1023000.dcc_v2: DCC list passed 4 [ 51.022478] CAM_ERR: CAM-CCI: cam_cci_irq: 238 Base:ffffff80197f5000, M0_Q1 NACK ERROR: 0x10000000 [ 51.023983] CAM_ERR: CAM-CCI: cam_cci_read: 1306 ERROR with Slave 0x6c: [ 51.024008] CAM_ERR: CAM-CCI: cam_cci_read_bytes: 1561 failed to read rc:-22 [ 51.024026] CAM_ERR: CAM-SENSOR: cam_cci_i2c_read: 35 rc = -22 [ 51.024043] CAM_WARN: CAM-SENSOR: cam_sensor_match_id: 769 read id: 0x0 expected id 0x885a: [ 51.024295] msm-dcc 1023000.dcc_v2: All values written to enable. [ 51.024646] msm-dcc 1023000.dcc_v2: DCC list passed 6 [ 51.027540] qcom,camera ac50000.qcom,cci:qcom,cam-sensor2: Dropping the link to regulator.77 [ 51.030693] msm-dcc 1023000.dcc_v2: All values written to enable. [ 51.036971] qcom,camera ac50000.qcom,cci:qcom,cam-sensor2: Dropping the link to regulator.54 [ 51.037522] qcom,camera ac50000.qcom,cci:qcom,cam-sensor2: Dropping the link to regulator.56 [ 51.038000] qcom,camera ac50000.qcom,cci:qcom,cam-sensor2: Dropping the link to regulator.57 [ 51.073516] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor4: Linked as a consumer to regulator.55 [ 51.079823] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor4: Linked as a consumer to regulator.57 [ 51.081431] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor4: Linked as a consumer to regulator.77 [ 51.081467] CAM_ERR: CAM-UTIL: cam_soc_util_regulator_enable: 1459 cam_clk set voltage failed [ 51.081490] CAM_ERR: CAM-SENSOR: cam_sensor_core_power_up: 1928 Reg enable failed [ 51.081509] CAM_ERR: CAM-SENSOR: cam_sensor_core_power_up: 2062 failed [ 51.081969] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor4: Dropping the link to regulator.57 [ 51.082074] CAM_ERR: CAM-SENSOR: cam_sensor_core_power_up: 2131 seq_val:100 > num_vreg: 4 [ 51.085016] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor4: Dropping the link to regulator.55 [ 51.093596] CAM_ERR: CAM-CCI: cam_cci_irq: 238 Base:ffffff80195fd000, M0_Q1 NACK ERROR: 0x10000000 [ 51.093820] CAM_ERR: CAM-CCI: cam_cci_read: 1306 ERROR with Slave 0xc0: [ 51.093846] CAM_ERR: CAM-CCI: cam_cci_read_bytes: 1561 failed to read rc:-22 [ 51.093864] CAM_ERR: CAM-SENSOR: cam_cci_i2c_read: 35 rc = -22 [ 51.093883] CAM_WARN: CAM-SENSOR: cam_sensor_match_id: 769 read id: 0x0 expected id 0x9281: [ 51.093903] ------------[ cut here ]------------ [ 51.093912] cam_cc_mclk0_clk already disabled [ 51.093964] WARNING: CPU: 0 PID: 848 at drivers/clk/clk.c:1144 clk_core_disable+0x230/0x270 [ 51.093972] Modules linked in: machine_dlkm(O) wcd938x_slave_dlkm(O) wcd938x_dlkm(O) wcd9xxx_dlkm(O) mbhc_dlkm(O) tx_macro_dlkm(O) rx_macro_dlkm(O) va_macro_dlkm(O) wsa_macro_dlkm(O) swr_ctrl_dlkm(O) bolero_cdc_dlkm(O) wsa881x_dlkm(O) wcd_core_dlkm(O) stub_dlkm(O) hdmi_dlkm(O) swr_dlkm(O) pinctrl_lpi_dlkm(O) pinctrl_wcd_dlkm(O) usf_dlkm(O) native_dlkm(O) platform_dlkm(O) q6_dlkm(O) adsp_loader_dlkm(O) apr_dlkm(O) snd_event_dlkm(O) q6_notifier_dlkm(O) q6_pdr_dlkm(O) msm_11ad_proxy [ 51.094049] CPU: 0 PID: 848 Comm: android.hardwar Tainted: G S W O 4.19.157+ #1 [ 51.094057] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 51.094067] pstate: 60400085 (nZCv daIf +PAN -UAO) [ 51.094075] pc : clk_core_disable+0x230/0x270 [ 51.094084] lr : clk_core_disable+0x230/0x270 [ 51.094091] sp : ffffff8012ee3970 [ 51.094098] x29: ffffff8012ee3970 x28: ffffffc90bd38080 [ 51.094108] x27: 0000000000000000 x26: 0000000000000068 [ 51.094118] x25: ffffffa50a9272a8 x24: ffffffa50bf510fa [ 51.094128] x23: ffffffa50bf51082 x22: ffffffc944fc6100 [ 51.094138] x21: 0000000000000000 x20: ffffffc94c564c80 [ 51.094148] x19: ffffffc94c564c80 x18: 0000000000000034 [ 51.094158] x17: ffffffa50d8f4000 x16: 00000000fffa91e8 [ 51.094168] x15: 00000000000a91e8 x14: 00000000000000c2 [ 51.094178] x13: 0000000000000000 x12: 00000000000000e0 [ 51.094189] x11: 0000000000000000 x10: 0000000000000001 [ 51.094199] x9 : 450514ed24766500 x8 : 450514ed24766500 [ 51.094209] x7 : ffffffa509d82700 x6 : 0000000000000000 [ 51.094218] x5 : 0000000000000080 x4 : 0000000000000001 [ 51.094228] x3 : 0000000000000000 x2 : 0000000000000007 [ 51.094238] x1 : 0000000000000007 x0 : 0000000000000021 [ 51.094249] Call trace: [ 51.094258] clk_core_disable+0x230/0x270 [ 51.094267] clk_disable+0x34/0x98 [ 51.094279] cam_soc_util_clk_disable+0x4c/0x68 [ 51.094290] cam_sensor_util_power_down+0x258/0x4b8 [ 51.094299] cam_sensor_power_down+0x34/0x130 [ 51.094309] cam_sensor_driver_cmd+0x35c/0x12e0 [ 51.094317] cam_sensor_subdev_ioctl+0x3c/0x80 [ 51.094329] subdev_do_ioctl_lock+0x764/0xbc8 [ 51.094337] video_usercopy+0x38c/0x850 [ 51.094345] subdev_ioctl+0x38/0x48 [ 51.094355] v4l2_ioctl+0x6c/0x80 [ 51.094366] do_vfs_ioctl+0x748/0x1210 [ 51.094375] __arm64_sys_ioctl+0x78/0xa0 [ 51.094385] el0_svc_common+0xa4/0x190 [ 51.094393] el0_svc_handler+0x6c/0x88 [ 51.094403] el0_svc+0x8/0xc [ 51.094412] irq event stamp: 332284 [ 51.094423] hardirqs last enabled at (332283): [] console_unlock+0x4bc/0x568 [ 51.094433] hardirqs last disabled at (332284): [] clk_enable_lock+0x20/0xc8 [ 51.094442] softirqs last enabled at (332096): [] __do_softirq+0x50c/0x554 [ 51.094453] softirqs last disabled at (332085): [] irq_exit+0xfc/0x120 [ 51.094461] ---[ end trace 1d70a345b84a870d ]--- [ 51.094547] ------------[ cut here ]------------ [ 51.094566] cam_cc_mclk0_clk already unprepared [ 51.094609] WARNING: CPU: 0 PID: 848 at drivers/clk/clk.c:981 clk_core_unprepare+0x384/0x400 [ 51.094621] Modules linked in: machine_dlkm(O) wcd938x_slave_dlkm(O) wcd938x_dlkm(O) wcd9xxx_dlkm(O) mbhc_dlkm(O) tx_macro_dlkm(O) rx_macro_dlkm(O) va_macro_dlkm(O) wsa_macro_dlkm(O) swr_ctrl_dlkm(O) bolero_cdc_dlkm(O) wsa881x_dlkm(O) wcd_core_dlkm(O) stub_dlkm(O) hdmi_dlkm(O) swr_dlkm(O) pinctrl_lpi_dlkm(O) pinctrl_wcd_dlkm(O) usf_dlkm(O) native_dlkm(O) platform_dlkm(O) q6_dlkm(O) adsp_loader_dlkm(O) apr_dlkm(O) snd_event_dlkm(O) q6_notifier_dlkm(O) q6_pdr_dlkm(O) msm_11ad_proxy [ 51.094690] CPU: 0 PID: 848 Comm: android.hardwar Tainted: G S W O 4.19.157+ #1 [ 51.094702] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 51.094715] pstate: 60400005 (nZCv daif +PAN -UAO) [ 51.094729] pc : clk_core_unprepare+0x384/0x400 [ 51.094742] lr : clk_core_unprepare+0x384/0x400 [ 51.094755] sp : ffffff8012ee3960 [ 51.094767] x29: ffffff8012ee3960 x28: ffffffc90bd38080 [ 51.094789] x27: 0000000000000000 x26: 0000000000000068 [ 51.094812] x25: ffffffa50a9272a8 x24: ffffffa50bf510fa [ 51.094834] x23: ffffffa50bf51082 x22: ffffffc944fc6100 [ 51.094857] x21: ffffffa50e178000 x20: ffffffa50e178000 [ 51.094879] x19: ffffffc94c564c80 x18: 0000000000000034 [ 51.094900] x17: ffffffa50d8f4000 x16: 00000000fffa8558 [ 51.094921] x15: 00000000000a8558 x14: 00000000000000c2 [ 51.094941] x13: 0000000000000004 x12: 000000003a63ba5d [ 51.094961] x11: 0000000000000015 x10: 000000000682aaab [ 51.094982] x9 : 450514ed24766500 x8 : 450514ed24766500 [ 51.095005] x7 : ffffffa509d82700 x6 : 0000000000000000 [ 51.095026] x5 : 0000000000000080 x4 : 0000000000000001 [ 51.095046] x3 : ffffff8012ee3588 x2 : 0000000000000007 [ 51.095067] x1 : ffffffa509d82874 x0 : 0000000000000023 [ 51.095088] Call trace: [ 51.095103] clk_core_unprepare+0x384/0x400 [ 51.095116] clk_unprepare+0x88/0x108 [ 51.095129] cam_soc_util_clk_disable+0x54/0x68 [ 51.095142] cam_sensor_util_power_down+0x258/0x4b8 [ 51.095156] cam_sensor_power_down+0x34/0x130 [ 51.095170] cam_sensor_driver_cmd+0x35c/0x12e0 [ 51.095184] cam_sensor_subdev_ioctl+0x3c/0x80 [ 51.095199] subdev_do_ioctl_lock+0x764/0xbc8 [ 51.095211] video_usercopy+0x38c/0x850 [ 51.095224] subdev_ioctl+0x38/0x48 [ 51.095237] v4l2_ioctl+0x6c/0x80 [ 51.095251] do_vfs_ioctl+0x748/0x1210 [ 51.095264] __arm64_sys_ioctl+0x78/0xa0 [ 51.095277] el0_svc_common+0xa4/0x190 [ 51.095290] el0_svc_handler+0x6c/0x88 [ 51.095303] el0_svc+0x8/0xc [ 51.095315] irq event stamp: 332300 [ 51.095328] hardirqs last enabled at (332299): [] console_unlock+0x4bc/0x568 [ 51.095342] hardirqs last disabled at (332300): [] do_debug_exception+0x84/0x150 [ 51.095355] softirqs last enabled at (332096): [] __do_softirq+0x50c/0x554 [ 51.095369] softirqs last disabled at (332085): [] irq_exit+0xfc/0x120 [ 51.095381] ---[ end trace 1d70a345b84a870e ]--- [ 51.095957] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor4: Dropping the link to regulator.77 [ 51.100495] CAM_ERR: CAM-UTIL: cam_soc_util_regulator_disable: 1415 Invalid NULL parameter [ 51.100519] CAM_ERR: CAM-SENSOR: cam_sensor_util_power_down: 2290 Reg: cam_vio disable failed [ 51.100538] CAM_ERR: CAM-UTIL: cam_soc_util_regulator_disable: 1415 Invalid NULL parameter [ 51.100554] CAM_ERR: CAM-SENSOR: cam_sensor_util_power_down: 2290 Reg: cam_vana disable failed [ 51.101381] ------------[ cut here ]------------ [ 51.101400] unbalanced disables for titan_top_gdsc [ 51.101452] WARNING: CPU: 0 PID: 848 at drivers/regulator/core.c:2401 _regulator_disable+0x1a0/0x1b0 [ 51.101464] Modules linked in: machine_dlkm(O) wcd938x_slave_dlkm(O) wcd938x_dlkm(O) wcd9xxx_dlkm(O) mbhc_dlkm(O) tx_macro_dlkm(O) rx_macro_dlkm(O) va_macro_dlkm(O) wsa_macro_dlkm(O) swr_ctrl_dlkm(O) bolero_cdc_dlkm(O) wsa881x_dlkm(O) wcd_core_dlkm(O) stub_dlkm(O) hdmi_dlkm(O) swr_dlkm(O) pinctrl_lpi_dlkm(O) pinctrl_wcd_dlkm(O) usf_dlkm(O) native_dlkm(O) platform_dlkm(O) q6_dlkm(O) adsp_loader_dlkm(O) apr_dlkm(O) snd_event_dlkm(O) q6_notifier_dlkm(O) q6_pdr_dlkm(O) msm_11ad_proxy [ 51.101540] CPU: 0 PID: 848 Comm: android.hardwar Tainted: G S W O 4.19.157+ #1 [ 51.101553] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 51.101567] pstate: 60400005 (nZCv daif +PAN -UAO) [ 51.101580] pc : _regulator_disable+0x1a0/0x1b0 [ 51.101593] lr : _regulator_disable+0x19c/0x1b0 [ 51.101604] sp : ffffff8012ee33d0 [ 51.101616] x29: ffffff8012ee33d0 x28: 0000000000000000 [ 51.101637] x27: 0000007fc45213c0 x26: ffffffc944c9c000 [ 51.101657] x25: ffffffa50a9272a8 x24: ffffffc914d14b40 [ 51.101678] x23: ffffffc944c9ed18 x22: ffffffc944ca5bf0 [ 51.101698] x21: ffffffc94c4549a8 x20: 00000000fffffffb [ 51.101719] x19: ffffffc94c454880 x18: 0000000000000038 [ 51.101739] x17: ffffffa50d8f4000 x16: 00000000fffa7690 [ 51.101759] x15: 00000000000a7690 x14: 00000000000000c2 [ 51.101779] x13: 0000000000000004 x12: 000000003a65bafd [ 51.101800] x11: 0000000000000015 x10: 000000000682aaab [ 51.101820] x9 : 450514ed24766500 x8 : 450514ed24766500 [ 51.101840] x7 : ffffffa509d82700 x6 : 0000000000000000 [ 51.101861] x5 : 0000000000000080 x4 : 0000000000000001 [ 51.101881] x3 : ffffff8012ee2ff8 x2 : 0000000000000007 [ 51.101902] x1 : ffffffa509d82874 x0 : 0000000000000026 [ 51.101924] Call trace: [ 51.101937] _regulator_disable+0x1a0/0x1b0 [ 51.101950] regulator_disable+0x3c/0x88 [ 51.101966] cam_soc_util_disable_platform_resource+0xb0/0x100 [ 51.101981] cam_cpas_soc_disable_resources+0x30/0x78 [ 51.101994] cam_cpas_hw_stop+0x2a0/0x4e0 [ 51.102006] cam_cpas_stop+0x58/0x110 [ 51.102021] cam_cci_soc_release+0x110/0x1a0 [ 51.102034] cam_cci_core_cfg+0x14c/0x15e8 [ 51.102046] cam_cci_subdev_ioctl+0x50/0xc0 [ 51.102059] cam_sensor_cci_i2c_util+0x60/0xd0 [ 51.102071] camera_io_release+0x38/0x88 [ 51.102085] cam_sensor_power_down+0x64/0x130 [ 51.102098] cam_sensor_driver_cmd+0x35c/0x12e0 [ 51.102111] cam_sensor_subdev_ioctl+0x3c/0x80 [ 51.102127] subdev_do_ioctl_lock+0x764/0xbc8 [ 51.102140] video_usercopy+0x38c/0x850 [ 51.102153] subdev_ioctl+0x38/0x48 [ 51.102167] v4l2_ioctl+0x6c/0x80 [ 51.102183] do_vfs_ioctl+0x748/0x1210 [ 51.102196] __arm64_sys_ioctl+0x78/0xa0 [ 51.102212] el0_svc_common+0xa4/0x190 [ 51.102225] el0_svc_handler+0x6c/0x88 [ 51.102239] el0_svc+0x8/0xc [ 51.102251] irq event stamp: 332606 [ 51.102266] hardirqs last enabled at (332605): [] console_unlock+0x4bc/0x568 [ 51.102279] hardirqs last disabled at (332606): [] do_debug_exception+0x84/0x150 [ 51.102293] softirqs last enabled at (332430): [] __do_softirq+0x50c/0x554 [ 51.102307] softirqs last disabled at (332415): [] irq_exit+0xfc/0x120 [ 51.102319] ---[ end trace 1d70a345b84a870f ]--- [ 51.135239] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor0: Linked as a consumer to regulator.55 [ 51.141094] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor0: Linked as a consumer to regulator.57 [ 51.144991] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor0: Linked as a consumer to regulator.77 [ 51.145022] CAM_ERR: CAM-UTIL: cam_soc_util_regulator_enable: 1459 cam_clk set voltage failed [ 51.145040] CAM_ERR: CAM-SENSOR: cam_sensor_core_power_up: 1928 Reg enable failed [ 51.145058] CAM_ERR: CAM-SENSOR: cam_sensor_core_power_up: 2062 failed [ 51.145528] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor0: Dropping the link to regulator.57 [ 51.147725] CAM_ERR: CAM-SENSOR: cam_sensor_core_power_up: 2131 seq_val:100 > num_vreg: 4 [ 51.150359] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor0: Dropping the link to regulator.55 [ 51.157290] CAM_ERR: CAM-CCI: cam_cci_irq: 238 Base:ffffff80195fd000, M0_Q1 NACK ERROR: 0x10000000 [ 51.157496] CAM_ERR: CAM-CCI: cam_cci_read: 1306 ERROR with Slave 0x34: [ 51.157522] CAM_ERR: CAM-CCI: cam_cci_read_bytes: 1561 failed to read rc:-22 [ 51.157539] CAM_ERR: CAM-SENSOR: cam_cci_i2c_read: 35 rc = -22 [ 51.157558] CAM_WARN: CAM-SENSOR: cam_sensor_match_id: 769 read id: 0x0 expected id 0x519: [ 51.159688] ------------[ cut here ]------------ [ 51.159697] cam_cc_mclk0_clk already disabled [ 51.159743] WARNING: CPU: 0 PID: 848 at drivers/clk/clk.c:1144 clk_core_disable+0x230/0x270 [ 51.159751] Modules linked in: machine_dlkm(O) wcd938x_slave_dlkm(O) wcd938x_dlkm(O) wcd9xxx_dlkm(O) mbhc_dlkm(O) tx_macro_dlkm(O) rx_macro_dlkm(O) va_macro_dlkm(O) wsa_macro_dlkm(O) swr_ctrl_dlkm(O) bolero_cdc_dlkm(O) wsa881x_dlkm(O) wcd_core_dlkm(O) stub_dlkm(O) hdmi_dlkm(O) swr_dlkm(O) pinctrl_lpi_dlkm(O) pinctrl_wcd_dlkm(O) usf_dlkm(O) native_dlkm(O) platform_dlkm(O) q6_dlkm(O) adsp_loader_dlkm(O) apr_dlkm(O) snd_event_dlkm(O) q6_notifier_dlkm(O) q6_pdr_dlkm(O) msm_11ad_proxy [ 51.159828] CPU: 0 PID: 848 Comm: android.hardwar Tainted: G S W O 4.19.157+ #1 [ 51.159835] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 51.159844] pstate: 60400085 (nZCv daIf +PAN -UAO) [ 51.159853] pc : clk_core_disable+0x230/0x270 [ 51.159861] lr : clk_core_disable+0x230/0x270 [ 51.159868] sp : ffffff8012ee3970 [ 51.159875] x29: ffffff8012ee3970 x28: ffffffc90bd3d080 [ 51.159885] x27: 0000000000000001 x26: 0000000000000068 [ 51.159895] x25: ffffffa50a9272a8 x24: ffffffa50bf510fa [ 51.159906] x23: ffffffa50bf51082 x22: ffffffc944fb8a80 [ 51.159916] x21: 0000000000000000 x20: ffffffc94c564c80 [ 51.159926] x19: ffffffc94c564c80 x18: 0000000000000034 [ 51.159936] x17: ffffffa50d8f4000 x16: 00000000fffa6234 [ 51.159946] x15: 00000000000a6234 x14: 00000000000000c2 [ 51.159956] x13: 0000000000000000 x12: 00000000000000e0 [ 51.159966] x11: 0000000000000000 x10: 0000000000000001 [ 51.159976] x9 : 450514ed24766500 x8 : 450514ed24766500 [ 51.159986] x7 : ffffffa509d82700 x6 : 0000000000000000 [ 51.159996] x5 : 0000000000000080 x4 : 0000000000000001 [ 51.160006] x3 : 0000000000000000 x2 : 0000000000000007 [ 51.160016] x1 : 0000000000000007 x0 : 0000000000000021 [ 51.160027] Call trace: [ 51.160037] clk_core_disable+0x230/0x270 [ 51.160047] clk_disable+0x34/0x98 [ 51.160059] cam_soc_util_clk_disable+0x4c/0x68 [ 51.160071] cam_sensor_util_power_down+0x258/0x4b8 [ 51.160081] cam_sensor_power_down+0x34/0x130 [ 51.160089] cam_sensor_driver_cmd+0x35c/0x12e0 [ 51.160098] cam_sensor_subdev_ioctl+0x3c/0x80 [ 51.160110] subdev_do_ioctl_lock+0x764/0xbc8 [ 51.160119] video_usercopy+0x38c/0x850 [ 51.160127] subdev_ioctl+0x38/0x48 [ 51.160138] v4l2_ioctl+0x6c/0x80 [ 51.160150] do_vfs_ioctl+0x748/0x1210 [ 51.160158] __arm64_sys_ioctl+0x78/0xa0 [ 51.160171] el0_svc_common+0xa4/0x190 [ 51.160179] el0_svc_handler+0x6c/0x88 [ 51.160190] el0_svc+0x8/0xc [ 51.160197] irq event stamp: 336500 [ 51.160209] hardirqs last enabled at (336499): [] _raw_spin_unlock_irq+0x34/0x68 [ 51.160218] hardirqs last disabled at (336500): [] clk_enable_lock+0x20/0xc8 [ 51.160227] softirqs last enabled at (336316): [] __do_softirq+0x50c/0x554 [ 51.160238] softirqs last disabled at (336307): [] irq_exit+0xfc/0x120 [ 51.160245] ---[ end trace 1d70a345b84a8710 ]--- [ 51.160414] ------------[ cut here ]------------ [ 51.160432] cam_cc_mclk0_clk already unprepared [ 51.160475] WARNING: CPU: 0 PID: 848 at drivers/clk/clk.c:981 clk_core_unprepare+0x384/0x400 [ 51.160487] Modules linked in: machine_dlkm(O) wcd938x_slave_dlkm(O) wcd938x_dlkm(O) wcd9xxx_dlkm(O) mbhc_dlkm(O) tx_macro_dlkm(O) rx_macro_dlkm(O) va_macro_dlkm(O) wsa_macro_dlkm(O) swr_ctrl_dlkm(O) bolero_cdc_dlkm(O) wsa881x_dlkm(O) wcd_core_dlkm(O) stub_dlkm(O) hdmi_dlkm(O) swr_dlkm(O) pinctrl_lpi_dlkm(O) pinctrl_wcd_dlkm(O) usf_dlkm(O) native_dlkm(O) platform_dlkm(O) q6_dlkm(O) adsp_loader_dlkm(O) apr_dlkm(O) snd_event_dlkm(O) q6_notifier_dlkm(O) q6_pdr_dlkm(O) msm_11ad_proxy [ 51.160555] CPU: 0 PID: 848 Comm: android.hardwar Tainted: G S W O 4.19.157+ #1 [ 51.160567] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 51.160579] pstate: 60400005 (nZCv daif +PAN -UAO) [ 51.160594] pc : clk_core_unprepare+0x384/0x400 [ 51.160607] lr : clk_core_unprepare+0x384/0x400 [ 51.160619] sp : ffffff8012ee3960 [ 51.160630] x29: ffffff8012ee3960 x28: ffffffc90bd3d080 [ 51.160651] x27: 0000000000000001 x26: 0000000000000068 [ 51.160672] x25: ffffffa50a9272a8 x24: ffffffa50bf510fa [ 51.160694] x23: ffffffa50bf51082 x22: ffffffc944fb8a80 [ 51.160715] x21: ffffffa50e178000 x20: ffffffa50e178000 [ 51.160735] x19: ffffffc94c564c80 x18: 0000000000000034 [ 51.160756] x17: ffffffa50d8f4000 x16: 00000000fffa55a0 [ 51.160777] x15: 00000000000a55a0 x14: 00000000000000c2 [ 51.160798] x13: 0000000000000004 x12: 000000003a77064d [ 51.160819] x11: 0000000000000015 x10: 000000000682aaab [ 51.160839] x9 : 450514ed24766500 x8 : 450514ed24766500 [ 51.160859] x7 : ffffffa509d82700 x6 : 0000000000000000 [ 51.160880] x5 : 0000000000000080 x4 : 0000000000000001 [ 51.160900] x3 : ffffff8012ee3588 x2 : ffffffa509c97b48 [ 51.160921] x1 : ffffffa509d82874 x0 : 0000000000000023 [ 51.160941] Call trace: [ 51.160955] clk_core_unprepare+0x384/0x400 [ 51.160969] clk_unprepare+0x88/0x108 [ 51.160983] cam_soc_util_clk_disable+0x54/0x68 [ 51.160997] cam_sensor_util_power_down+0x258/0x4b8 [ 51.161010] cam_sensor_power_down+0x34/0x130 [ 51.161023] cam_sensor_driver_cmd+0x35c/0x12e0 [ 51.161036] cam_sensor_subdev_ioctl+0x3c/0x80 [ 51.161049] subdev_do_ioctl_lock+0x764/0xbc8 [ 51.161062] video_usercopy+0x38c/0x850 [ 51.161075] subdev_ioctl+0x38/0x48 [ 51.161088] v4l2_ioctl+0x6c/0x80 [ 51.161102] do_vfs_ioctl+0x748/0x1210 [ 51.161115] __arm64_sys_ioctl+0x78/0xa0 [ 51.161128] el0_svc_common+0xa4/0x190 [ 51.161141] el0_svc_handler+0x6c/0x88 [ 51.161155] el0_svc+0x8/0xc [ 51.161167] irq event stamp: 336526 [ 51.161184] hardirqs last enabled at (336525): [] console_unlock+0x4bc/0x568 [ 51.161198] hardirqs last disabled at (336526): [] do_debug_exception+0x84/0x150 [ 51.161212] softirqs last enabled at (336512): [] __do_softirq+0x50c/0x554 [ 51.161228] softirqs last disabled at (336503): [] irq_exit+0xfc/0x120 [ 51.161241] ---[ end trace 1d70a345b84a8711 ]--- [ 51.161711] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor0: Dropping the link to regulator.77 [ 51.163926] CAM_ERR: CAM-UTIL: cam_soc_util_regulator_disable: 1415 Invalid NULL parameter [ 51.163945] CAM_ERR: CAM-SENSOR: cam_sensor_util_power_down: 2290 Reg: cam_vio disable failed [ 51.163963] CAM_ERR: CAM-UTIL: cam_soc_util_regulator_disable: 1415 Invalid NULL parameter [ 51.163980] CAM_ERR: CAM-SENSOR: cam_sensor_util_power_down: 2290 Reg: cam_vana disable failed [ 51.164977] ------------[ cut here ]------------ [ 51.164997] unbalanced disables for titan_top_gdsc [ 51.165047] WARNING: CPU: 0 PID: 848 at drivers/regulator/core.c:2401 _regulator_disable+0x1a0/0x1b0 [ 51.165060] Modules linked in: machine_dlkm(O) wcd938x_slave_dlkm(O) wcd938x_dlkm(O) wcd9xxx_dlkm(O) mbhc_dlkm(O) tx_macro_dlkm(O) rx_macro_dlkm(O) va_macro_dlkm(O) wsa_macro_dlkm(O) swr_ctrl_dlkm(O) bolero_cdc_dlkm(O) wsa881x_dlkm(O) wcd_core_dlkm(O) stub_dlkm(O) hdmi_dlkm(O) swr_dlkm(O) pinctrl_lpi_dlkm(O) pinctrl_wcd_dlkm(O) usf_dlkm(O) native_dlkm(O) platform_dlkm(O) q6_dlkm(O) adsp_loader_dlkm(O) apr_dlkm(O) snd_event_dlkm(O) q6_notifier_dlkm(O) q6_pdr_dlkm(O) msm_11ad_proxy [ 51.165129] CPU: 0 PID: 848 Comm: android.hardwar Tainted: G S W O 4.19.157+ #1 [ 51.165141] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 51.165154] pstate: 60400005 (nZCv daif +PAN -UAO) [ 51.165166] pc : _regulator_disable+0x1a0/0x1b0 [ 51.165179] lr : _regulator_disable+0x19c/0x1b0 [ 51.165190] sp : ffffff8012ee33d0 [ 51.165202] x29: ffffff8012ee33d0 x28: 0000000000000000 [ 51.165223] x27: 0000007fc45213c0 x26: ffffffc944c9c000 [ 51.165243] x25: ffffffa50a9272a8 x24: ffffffc914d13c40 [ 51.165264] x23: ffffffc944c9ed18 x22: ffffffc944ca5bf0 [ 51.165284] x21: ffffffc94c4549a8 x20: 00000000fffffffb [ 51.165304] x19: ffffffc94c454880 x18: 0000000000000038 [ 51.165325] x17: ffffffa50d8f4000 x16: 00000000fffa46d8 [ 51.165346] x15: 00000000000a46d8 x14: 00000000000000c2 [ 51.165366] x13: 0000000000000004 x12: 000000003a785cc4 [ 51.165387] x11: 0000000000000015 x10: 000000000682aaab [ 51.165407] x9 : 450514ed24766500 x8 : 450514ed24766500 [ 51.165428] x7 : ffffffa509d82700 x6 : 0000000000000000 [ 51.165448] x5 : 0000000000000080 x4 : 0000000000000001 [ 51.165468] x3 : ffffff8012ee2ff8 x2 : 0000000000000007 [ 51.165488] x1 : ffffffa509d82874 x0 : 0000000000000026 [ 51.165509] Call trace: [ 51.165522] _regulator_disable+0x1a0/0x1b0 [ 51.165535] regulator_disable+0x3c/0x88 [ 51.165548] cam_soc_util_disable_platform_resource+0xb0/0x100 [ 51.165564] cam_cpas_soc_disable_resources+0x30/0x78 [ 51.165576] cam_cpas_hw_stop+0x2a0/0x4e0 [ 51.165589] cam_cpas_stop+0x58/0x110 [ 51.165602] cam_cci_soc_release+0x110/0x1a0 [ 51.165615] cam_cci_core_cfg+0x14c/0x15e8 [ 51.165628] cam_cci_subdev_ioctl+0x50/0xc0 [ 51.165641] cam_sensor_cci_i2c_util+0x60/0xd0 [ 51.165654] camera_io_release+0x38/0x88 [ 51.165667] cam_sensor_power_down+0x64/0x130 [ 51.165680] cam_sensor_driver_cmd+0x35c/0x12e0 [ 51.165693] cam_sensor_subdev_ioctl+0x3c/0x80 [ 51.165707] subdev_do_ioctl_lock+0x764/0xbc8 [ 51.165719] video_usercopy+0x38c/0x850 [ 51.165732] subdev_ioctl+0x38/0x48 [ 51.165746] v4l2_ioctl+0x6c/0x80 [ 51.165761] do_vfs_ioctl+0x748/0x1210 [ 51.165773] __arm64_sys_ioctl+0x78/0xa0 [ 51.165786] el0_svc_common+0xa4/0x190 [ 51.165799] el0_svc_handler+0x6c/0x88 [ 51.165812] el0_svc+0x8/0xc [ 51.165824] irq event stamp: 336804 [ 51.165837] hardirqs last enabled at (336803): [] console_unlock+0x4bc/0x568 [ 51.165850] hardirqs last disabled at (336804): [] do_debug_exception+0x84/0x150 [ 51.165864] softirqs last enabled at (336724): [] __do_softirq+0x50c/0x554 [ 51.165878] softirqs last disabled at (336709): [] irq_exit+0xfc/0x120 [ 51.165889] ---[ end trace 1d70a345b84a8712 ]--- [ 51.199524] qcom,camera ac50000.qcom,cci:qcom,cam-sensor3: Linked as a consumer to regulator.57 [ 51.201371] qcom,camera ac50000.qcom,cci:qcom,cam-sensor3: Linked as a consumer to regulator.86 [ 51.229595] qcom,camera ac50000.qcom,cci:qcom,cam-sensor3: Linked as a consumer to regulator.77 [ 51.245594] CAM_ERR: CAM-CCI: cam_cci_irq: 264 Base:ffffff80197f5000, M1_Q1 NACK ERROR: 0x40000000 [ 51.245720] CAM_ERR: CAM-CCI: cam_cci_read: 1306 ERROR with Slave 0x20: [ 51.245746] CAM_ERR: CAM-CCI: cam_cci_read_bytes: 1561 failed to read rc:-22 [ 51.245765] CAM_ERR: CAM-SENSOR: cam_cci_i2c_read: 35 rc = -22 [ 51.245784] CAM_WARN: CAM-SENSOR: cam_sensor_match_id: 769 read id: 0x0 expected id 0x885a: [ 51.246315] qcom,camera ac50000.qcom,cci:qcom,cam-sensor3: Dropping the link to regulator.77 [ 51.253041] qcom,camera ac50000.qcom,cci:qcom,cam-sensor3: Dropping the link to regulator.86 [ 51.253725] qcom,camera ac50000.qcom,cci:qcom,cam-sensor3: Dropping the link to regulator.57 [ 51.290652] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor5: Linked as a consumer to regulator.56 [ 51.293597] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor5: Linked as a consumer to regulator.53 [ 51.297475] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor5: Linked as a consumer to regulator.57 [ 51.299055] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor5: Linked as a consumer to regulator.77 [ 51.325474] CAM_ERR: CAM-CCI: cam_cci_irq: 264 Base:ffffff80195fd000, M1_Q1 NACK ERROR: 0x40000000 [ 51.325794] CAM_ERR: CAM-CCI: cam_cci_read: 1306 ERROR with Slave 0xc0: [ 51.325822] CAM_ERR: CAM-CCI: cam_cci_read_bytes: 1561 failed to read rc:-22 [ 51.325840] CAM_ERR: CAM-SENSOR: cam_cci_i2c_read: 35 rc = -22 [ 51.325858] CAM_WARN: CAM-SENSOR: cam_sensor_match_id: 769 read id: 0x0 expected id 0x9281: [ 51.327235] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor5: Dropping the link to regulator.77 [ 51.332595] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor5: Dropping the link to regulator.57 [ 51.333199] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor5: Dropping the link to regulator.53 [ 51.333911] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor5: Dropping the link to regulator.56 [ 51.374514] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor0: Linked as a consumer to regulator.55 [ 51.377862] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor0: Linked as a consumer to regulator.57 [ 51.379323] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor0: Linked as a consumer to regulator.77 [ 51.379356] CAM_ERR: CAM-UTIL: cam_soc_util_regulator_enable: 1459 cam_clk set voltage failed [ 51.379374] CAM_ERR: CAM-SENSOR: cam_sensor_core_power_up: 1928 Reg enable failed [ 51.379391] CAM_ERR: CAM-SENSOR: cam_sensor_core_power_up: 2062 failed [ 51.379800] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor0: Dropping the link to regulator.57 [ 51.379903] CAM_ERR: CAM-SENSOR: cam_sensor_core_power_up: 2131 seq_val:100 > num_vreg: 4 [ 51.381463] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor0: Dropping the link to regulator.55 [ 51.389427] CAM_ERR: CAM-CCI: cam_cci_irq: 238 Base:ffffff80195fd000, M0_Q1 NACK ERROR: 0x10000000 [ 51.389568] CAM_ERR: CAM-CCI: cam_cci_read: 1306 ERROR with Slave 0x20: [ 51.389595] CAM_ERR: CAM-CCI: cam_cci_read_bytes: 1561 failed to read rc:-22 [ 51.389615] CAM_ERR: CAM-SENSOR: cam_cci_i2c_read: 35 rc = -22 [ 51.389634] CAM_WARN: CAM-SENSOR: cam_sensor_match_id: 769 read id: 0x0 expected id 0x362: [ 51.389654] ------------[ cut here ]------------ [ 51.389662] cam_cc_mclk0_clk already disabled [ 51.389712] WARNING: CPU: 0 PID: 848 at drivers/clk/clk.c:1144 clk_core_disable+0x230/0x270 [ 51.389720] Modules linked in: machine_dlkm(O) wcd938x_slave_dlkm(O) wcd938x_dlkm(O) wcd9xxx_dlkm(O) mbhc_dlkm(O) tx_macro_dlkm(O) rx_macro_dlkm(O) va_macro_dlkm(O) wsa_macro_dlkm(O) swr_ctrl_dlkm(O) bolero_cdc_dlkm(O) wsa881x_dlkm(O) wcd_core_dlkm(O) stub_dlkm(O) hdmi_dlkm(O) swr_dlkm(O) pinctrl_lpi_dlkm(O) pinctrl_wcd_dlkm(O) usf_dlkm(O) native_dlkm(O) platform_dlkm(O) q6_dlkm(O) adsp_loader_dlkm(O) apr_dlkm(O) snd_event_dlkm(O) q6_notifier_dlkm(O) q6_pdr_dlkm(O) msm_11ad_proxy [ 51.389801] CPU: 0 PID: 848 Comm: android.hardwar Tainted: G S W O 4.19.157+ #1 [ 51.389810] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 51.389819] pstate: 60400085 (nZCv daIf +PAN -UAO) [ 51.389828] pc : clk_core_disable+0x230/0x270 [ 51.389837] lr : clk_core_disable+0x230/0x270 [ 51.389845] sp : ffffff8012ee3970 [ 51.389852] x29: ffffff8012ee3970 x28: ffffffc90bd3c680 [ 51.389863] x27: 0000000000000000 x26: 0000000000000068 [ 51.389873] x25: ffffffa50a9272a8 x24: ffffffa50bf510fa [ 51.389885] x23: ffffffa50bf51082 x22: ffffffc944fb8a80 [ 51.389895] x21: 0000000000000000 x20: ffffffc94c564c80 [ 51.389906] x19: ffffffc94c564c80 x18: 0000000000000034 [ 51.389917] x17: ffffffa50d8f4000 x16: 00000000fffa25fc [ 51.389927] x15: 00000000000a25fc x14: 00000000000000c2 [ 51.389939] x13: 0000000000000000 x12: 00000000000000e0 [ 51.389950] x11: 0000000000000000 x10: 0000000000000001 [ 51.389961] x9 : 450514ed24766500 x8 : 450514ed24766500 [ 51.389972] x7 : ffffffa509d82700 x6 : 0000000000000000 [ 51.389982] x5 : 0000000000000080 x4 : 0000000000000001 [ 51.389992] x3 : 0000000000000000 x2 : 0000000000000007 [ 51.390002] x1 : 0000000000000007 x0 : 0000000000000021 [ 51.390014] Call trace: [ 51.390023] clk_core_disable+0x230/0x270 [ 51.390034] clk_disable+0x34/0x98 [ 51.390046] cam_soc_util_clk_disable+0x4c/0x68 [ 51.390057] cam_sensor_util_power_down+0x258/0x4b8 [ 51.390068] cam_sensor_power_down+0x34/0x130 [ 51.390077] cam_sensor_driver_cmd+0x35c/0x12e0 [ 51.390087] cam_sensor_subdev_ioctl+0x3c/0x80 [ 51.390099] subdev_do_ioctl_lock+0x764/0xbc8 [ 51.390110] video_usercopy+0x38c/0x850 [ 51.390118] subdev_ioctl+0x38/0x48 [ 51.390129] v4l2_ioctl+0x6c/0x80 [ 51.390142] do_vfs_ioctl+0x748/0x1210 [ 51.390150] __arm64_sys_ioctl+0x78/0xa0 [ 51.390162] el0_svc_common+0xa4/0x190 [ 51.390171] el0_svc_handler+0x6c/0x88 [ 51.390181] el0_svc+0x8/0xc [ 51.390189] irq event stamp: 349638 [ 51.390201] hardirqs last enabled at (349637): [] console_unlock+0x4bc/0x568 [ 51.390211] hardirqs last disabled at (349638): [] clk_enable_lock+0x20/0xc8 [ 51.390220] softirqs last enabled at (348880): [] __do_softirq+0x50c/0x554 [ 51.390230] softirqs last disabled at (348871): [] irq_exit+0xfc/0x120 [ 51.390250] ---[ end trace 1d70a345b84a8713 ]--- [ 51.390391] ------------[ cut here ]------------ [ 51.390411] cam_cc_mclk0_clk already unprepared [ 51.390459] WARNING: CPU: 0 PID: 848 at drivers/clk/clk.c:981 clk_core_unprepare+0x384/0x400 [ 51.390472] Modules linked in: machine_dlkm(O) wcd938x_slave_dlkm(O) wcd938x_dlkm(O) wcd9xxx_dlkm(O) mbhc_dlkm(O) tx_macro_dlkm(O) rx_macro_dlkm(O) va_macro_dlkm(O) wsa_macro_dlkm(O) swr_ctrl_dlkm(O) bolero_cdc_dlkm(O) wsa881x_dlkm(O) wcd_core_dlkm(O) stub_dlkm(O) hdmi_dlkm(O) swr_dlkm(O) pinctrl_lpi_dlkm(O) pinctrl_wcd_dlkm(O) usf_dlkm(O) native_dlkm(O) platform_dlkm(O) q6_dlkm(O) adsp_loader_dlkm(O) apr_dlkm(O) snd_event_dlkm(O) q6_notifier_dlkm(O) q6_pdr_dlkm(O) msm_11ad_proxy [ 51.390612] CPU: 0 PID: 848 Comm: android.hardwar Tainted: G S W O 4.19.157+ #1 [ 51.390625] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 51.390639] pstate: 60400005 (nZCv daif +PAN -UAO) [ 51.390654] pc : clk_core_unprepare+0x384/0x400 [ 51.390668] lr : clk_core_unprepare+0x384/0x400 [ 51.390681] sp : ffffff8012ee3960 [ 51.390693] x29: ffffff8012ee3960 x28: ffffffc90bd3c680 [ 51.390716] x27: 0000000000000000 x26: 0000000000000068 [ 51.390738] x25: ffffffa50a9272a8 x24: ffffffa50bf510fa [ 51.390760] x23: ffffffa50bf51082 x22: ffffffc944fb8a80 [ 51.390782] x21: ffffffa50e178000 x20: ffffffa50e178000 [ 51.390806] x19: ffffffc94c564c80 x18: 0000000000000034 [ 51.390828] x17: ffffffa50d8f4000 x16: 00000000fffa196c [ 51.390850] x15: 00000000000a196c x14: 00000000000000c2 [ 51.390873] x13: 0000000000000004 x12: 000000003aba66c1 [ 51.390896] x11: 0000000000000015 x10: 000000000682aaab [ 51.390918] x9 : 450514ed24766500 x8 : 450514ed24766500 [ 51.390941] x7 : ffffffa509d82700 x6 : 0000000000000000 [ 51.390962] x5 : 0000000000000080 x4 : 0000000000000001 [ 51.390983] x3 : ffffff8012ee3588 x2 : 0000000000000007 [ 51.391004] x1 : ffffffa509d82874 x0 : 0000000000000023 [ 51.391025] Call trace: [ 51.391040] clk_core_unprepare+0x384/0x400 [ 51.391053] clk_unprepare+0x88/0x108 [ 51.391067] cam_soc_util_clk_disable+0x54/0x68 [ 51.391081] cam_sensor_util_power_down+0x258/0x4b8 [ 51.391096] cam_sensor_power_down+0x34/0x130 [ 51.391110] cam_sensor_driver_cmd+0x35c/0x12e0 [ 51.391124] cam_sensor_subdev_ioctl+0x3c/0x80 [ 51.391138] subdev_do_ioctl_lock+0x764/0xbc8 [ 51.391151] video_usercopy+0x38c/0x850 [ 51.391165] subdev_ioctl+0x38/0x48 [ 51.391178] v4l2_ioctl+0x6c/0x80 [ 51.391193] do_vfs_ioctl+0x748/0x1210 [ 51.391207] __arm64_sys_ioctl+0x78/0xa0 [ 51.391221] el0_svc_common+0xa4/0x190 [ 51.391235] el0_svc_handler+0x6c/0x88 [ 51.391251] el0_svc+0x8/0xc [ 51.391263] irq event stamp: 349654 [ 51.391277] hardirqs last enabled at (349653): [] console_unlock+0x4bc/0x568 [ 51.391291] hardirqs last disabled at (349654): [] do_debug_exception+0x84/0x150 [ 51.391305] softirqs last enabled at (348880): [] __do_softirq+0x50c/0x554 [ 51.391319] softirqs last disabled at (348871): [] irq_exit+0xfc/0x120 [ 51.391331] ---[ end trace 1d70a345b84a8714 ]--- [ 51.391725] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor0: Dropping the link to regulator.77 [ 51.396112] CAM_ERR: CAM-UTIL: cam_soc_util_regulator_disable: 1415 Invalid NULL parameter [ 51.396136] CAM_ERR: CAM-SENSOR: cam_sensor_util_power_down: 2290 Reg: cam_vio disable failed [ 51.396154] CAM_ERR: CAM-UTIL: cam_soc_util_regulator_disable: 1415 Invalid NULL parameter [ 51.396171] CAM_ERR: CAM-SENSOR: cam_sensor_util_power_down: 2290 Reg: cam_vana disable failed [ 51.398276] ------------[ cut here ]------------ [ 51.398297] unbalanced disables for titan_top_gdsc [ 51.398357] WARNING: CPU: 0 PID: 848 at drivers/regulator/core.c:2401 _regulator_disable+0x1a0/0x1b0 [ 51.398371] Modules linked in: machine_dlkm(O) wcd938x_slave_dlkm(O) wcd938x_dlkm(O) wcd9xxx_dlkm(O) mbhc_dlkm(O) tx_macro_dlkm(O) rx_macro_dlkm(O) va_macro_dlkm(O) wsa_macro_dlkm(O) swr_ctrl_dlkm(O) bolero_cdc_dlkm(O) wsa881x_dlkm(O) wcd_core_dlkm(O) stub_dlkm(O) hdmi_dlkm(O) swr_dlkm(O) pinctrl_lpi_dlkm(O) pinctrl_wcd_dlkm(O) usf_dlkm(O) native_dlkm(O) platform_dlkm(O) q6_dlkm(O) adsp_loader_dlkm(O) apr_dlkm(O) snd_event_dlkm(O) q6_notifier_dlkm(O) q6_pdr_dlkm(O) msm_11ad_proxy [ 51.398451] CPU: 0 PID: 848 Comm: android.hardwar Tainted: G S W O 4.19.157+ #1 [ 51.398465] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 51.398478] pstate: 60400005 (nZCv daif +PAN -UAO) [ 51.398491] pc : _regulator_disable+0x1a0/0x1b0 [ 51.398504] lr : _regulator_disable+0x19c/0x1b0 [ 51.398517] sp : ffffff8012ee33d0 [ 51.398529] x29: ffffff8012ee33d0 x28: 0000000000000000 [ 51.398551] x27: 0000007fc45213c0 x26: ffffffc944c9c000 [ 51.398573] x25: ffffffa50a9272a8 x24: ffffffc914d13c40 [ 51.398595] x23: ffffffc944c9ed18 x22: ffffffc944ca5bf0 [ 51.398616] x21: ffffffc94c4549a8 x20: 00000000fffffffb [ 51.398637] x19: ffffffc94c454880 x18: 0000000000000038 [ 51.398659] x17: ffffffa50d8f4000 x16: 00000000fffa0aa4 [ 51.398680] x15: 00000000000a0aa4 x14: 00000000000000c2 [ 51.398702] x13: 0000000000000004 x12: 000000003abcb64a [ 51.398723] x11: 0000000000000015 x10: 000000000682aaab [ 51.398744] x9 : 450514ed24766500 x8 : 450514ed24766500 [ 51.398766] x7 : ffffffa509d82700 x6 : 0000000000000000 [ 51.398787] x5 : 0000000000000080 x4 : 0000000000000001 [ 51.398809] x3 : ffffff8012ee2ff8 x2 : 0000000000000007 [ 51.398830] x1 : ffffffa509d82874 x0 : 0000000000000026 [ 51.398852] Call trace: [ 51.398865] _regulator_disable+0x1a0/0x1b0 [ 51.398879] regulator_disable+0x3c/0x88 [ 51.398897] cam_soc_util_disable_platform_resource+0xb0/0x100 [ 51.398911] cam_cpas_soc_disable_resources+0x30/0x78 [ 51.398925] cam_cpas_hw_stop+0x2a0/0x4e0 [ 51.398937] cam_cpas_stop+0x58/0x110 [ 51.398954] cam_cci_soc_release+0x110/0x1a0 [ 51.398967] cam_cci_core_cfg+0x14c/0x15e8 [ 51.398980] cam_cci_subdev_ioctl+0x50/0xc0 [ 51.398993] cam_sensor_cci_i2c_util+0x60/0xd0 [ 51.399005] camera_io_release+0x38/0x88 [ 51.399020] cam_sensor_power_down+0x64/0x130 [ 51.399033] cam_sensor_driver_cmd+0x35c/0x12e0 [ 51.399048] cam_sensor_subdev_ioctl+0x3c/0x80 [ 51.399066] subdev_do_ioctl_lock+0x764/0xbc8 [ 51.399079] video_usercopy+0x38c/0x850 [ 51.399093] subdev_ioctl+0x38/0x48 [ 51.399107] v4l2_ioctl+0x6c/0x80 [ 51.399124] do_vfs_ioctl+0x748/0x1210 [ 51.399137] __arm64_sys_ioctl+0x78/0xa0 [ 51.399153] el0_svc_common+0xa4/0x190 [ 51.399167] el0_svc_handler+0x6c/0x88 [ 51.399182] el0_svc+0x8/0xc [ 51.399195] irq event stamp: 349956 [ 51.399212] hardirqs last enabled at (349955): [] console_unlock+0x4bc/0x568 [ 51.399226] hardirqs last disabled at (349956): [] do_debug_exception+0x84/0x150 [ 51.399239] softirqs last enabled at (349816): [] __do_softirq+0x50c/0x554 [ 51.399256] softirqs last disabled at (349799): [] irq_exit+0xfc/0x120 [ 51.399269] ---[ end trace 1d70a345b84a8715 ]--- [ 51.434314] qcom,camera ac50000.qcom,cci:qcom,cam-sensor2: Linked as a consumer to regulator.57 [ 51.435853] qcom,camera ac50000.qcom,cci:qcom,cam-sensor2: Linked as a consumer to regulator.56 [ 51.437474] qcom,camera ac50000.qcom,cci:qcom,cam-sensor2: Linked as a consumer to regulator.54 [ 51.463040] wlan: Loading driver v5.2.022.10G +TIMER_MANAGER +MEMORY_DEBUG +PANIC_ON_BUG; 2022-08-26T19:44:13Z; cld:; cmn:; [ 51.465481] qcom,camera ac50000.qcom,cci:qcom,cam-sensor2: Linked as a consumer to regulator.77 [ 51.495094] CAM_ERR: CAM-CCI: cam_cci_irq: 238 Base:ffffff80197f5000, M0_Q1 NACK ERROR: 0x10000000 [ 51.495180] CAM_ERR: CAM-CCI: cam_cci_read: 1306 ERROR with Slave 0x20: [ 51.495206] CAM_ERR: CAM-CCI: cam_cci_read_bytes: 1561 failed to read rc:-22 [ 51.495224] CAM_ERR: CAM-SENSOR: cam_cci_i2c_read: 35 rc = -22 [ 51.495242] CAM_WARN: CAM-SENSOR: cam_sensor_match_id: 769 read id: 0x0 expected id 0x885a: [ 51.495680] qcom,camera ac50000.qcom,cci:qcom,cam-sensor2: Dropping the link to regulator.77 [ 51.503548] qcom,camera ac50000.qcom,cci:qcom,cam-sensor2: Dropping the link to regulator.54 [ 51.504104] qcom,camera ac50000.qcom,cci:qcom,cam-sensor2: Dropping the link to regulator.56 [ 51.505419] qcom,camera ac50000.qcom,cci:qcom,cam-sensor2: Dropping the link to regulator.57 [ 51.512024] binder: 1243:1243 ioctl 40046210 ffa918d8 returned -22 [ 51.515140] msm-dai-fe soc:qcom,msm-dai-fe: ASoC: no sink widget found for AUXPCM_DL_HL [ 51.517361] ipa ipa3_uc_reg_rdyCB:2973 bad parm. inout=0000000000000000 [ 51.522256] wlan_hdd_state wlan major(475) initialized [ 51.523476] msm-dai-fe soc:qcom,msm-dai-fe: ASoC: Failed to add route AUXPCM_HOSTLESS Playback -> direct -> AUXPCM_DL_HL [ 51.523857] msm-dai-fe soc:qcom,msm-dai-fe: ASoC: no source widget found for AUXPCM_UL_HL [ 51.530812] cnss: Start to wait for calibration to complete [ 51.541940] msm-dai-fe soc:qcom,msm-dai-fe: ASoC: Failed to add route AUXPCM_UL_HL -> direct -> AUXPCM_HOSTLESS Capture [ 51.543519] qcom,camera ac50000.qcom,cci:qcom,cam-sensor3: Linked as a consumer to regulator.57 [ 51.557704] msm-auxpcm-dev soc:qcom,msm-pri-auxpcm: ASoC: no source widget found for AUX_PCM_RX [ 51.565094] qcom,camera ac50000.qcom,cci:qcom,cam-sensor3: Linked as a consumer to regulator.86 [ 51.571148] msm-auxpcm-dev soc:qcom,msm-pri-auxpcm: ASoC: Failed to add route AUX_PCM_RX -> direct -> AUX PCM Playback [ 51.571601] msm-auxpcm-dev soc:qcom,msm-pri-auxpcm: ASoC: no sink widget found for AUX_PCM_TX [ 51.591590] msm-auxpcm-dev soc:qcom,msm-pri-auxpcm: ASoC: Failed to add route AUX PCM Capture -> direct -> AUX_PCM_TX [ 51.603577] msm-auxpcm-dev soc:qcom,msm-sec-auxpcm: ASoC: no source widget found for SEC_AUX_PCM_RX [ 51.604118] qcom,camera ac50000.qcom,cci:qcom,cam-sensor3: Linked as a consumer to regulator.77 [ 51.613893] msm-auxpcm-dev soc:qcom,msm-sec-auxpcm: ASoC: Failed to add route SEC_AUX_PCM_RX -> direct -> Sec AUX PCM Playback [ 51.620138] binder: 1252:1252 ioctl 40046210 7ffb9cfe94 returned -22 [ 51.626785] msm-auxpcm-dev soc:qcom,msm-sec-auxpcm: ASoC: no sink widget found for SEC_AUX_PCM_TX [ 51.630909] CAM_ERR: CAM-CCI: cam_cci_irq: 264 Base:ffffff80197f5000, M1_Q1 NACK ERROR: 0x40000000 [ 51.636092] msm-auxpcm-dev soc:qcom,msm-sec-auxpcm: ASoC: Failed to add route Sec AUX PCM Capture -> direct -> SEC_AUX_PCM_TX [ 51.636585] CAM_ERR: CAM-CCI: cam_cci_read: 1306 ERROR with Slave 0x20: [ 51.648071] CAM_ERR: CAM-CCI: cam_cci_read_bytes: 1561 failed to read rc:-22 [ 51.648090] CAM_ERR: CAM-SENSOR: cam_cci_i2c_read: 35 rc = -22 [ 51.648109] CAM_WARN: CAM-SENSOR: cam_sensor_match_id: 769 read id: 0x0 expected id 0x3841: [ 51.648912] qcom,camera ac50000.qcom,cci:qcom,cam-sensor3: Dropping the link to regulator.77 [ 51.648980] msm-auxpcm-dev soc:qcom,msm-tert-auxpcm: ASoC: no source widget found for TERT_AUX_PCM_RX [ 51.652932] qcom,camera ac50000.qcom,cci:qcom,cam-sensor3: Dropping the link to regulator.86 [ 51.658769] msm-auxpcm-dev soc:qcom,msm-tert-auxpcm: ASoC: Failed to add route TERT_AUX_PCM_RX -> direct -> Tert AUX PCM Playback [ 51.659135] qcom,camera ac50000.qcom,cci:qcom,cam-sensor3: Dropping the link to regulator.57 [ 51.671916] msm-auxpcm-dev soc:qcom,msm-tert-auxpcm: ASoC: no sink widget found for TERT_AUX_PCM_TX [ 51.681684] msm-auxpcm-dev soc:qcom,msm-tert-auxpcm: ASoC: Failed to add route Tert AUX PCM Capture -> direct -> TERT_AUX_PCM_TX [ 51.694915] msm-auxpcm-dev soc:qcom,msm-quat-auxpcm: ASoC: no source widget found for QUAT_AUX_PCM_RX [ 51.704983] msm-auxpcm-dev soc:qcom,msm-quat-auxpcm: ASoC: Failed to add route QUAT_AUX_PCM_RX -> direct -> Quat AUX PCM Playback [ 51.714861] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor4: Linked as a consumer to regulator.55 [ 51.717912] msm-auxpcm-dev soc:qcom,msm-quat-auxpcm: ASoC: no sink widget found for QUAT_AUX_PCM_TX [ 51.723711] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor4: Linked as a consumer to regulator.57 [ 51.727404] msm-auxpcm-dev soc:qcom,msm-quat-auxpcm: ASoC: Failed to add route Quat AUX PCM Capture -> direct -> QUAT_AUX_PCM_TX [ 51.729633] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor4: Linked as a consumer to regulator.77 [ 51.739455] CAM_ERR: CAM-UTIL: cam_soc_util_regulator_enable: 1459 cam_clk set voltage failed [ 51.739474] CAM_ERR: CAM-SENSOR: cam_sensor_core_power_up: 1928 Reg enable failed [ 51.739493] CAM_ERR: CAM-SENSOR: cam_sensor_core_power_up: 2062 failed [ 51.739940] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor4: Dropping the link to regulator.57 [ 51.740045] CAM_ERR: CAM-SENSOR: cam_sensor_core_power_up: 2131 seq_val:100 > num_vreg: 4 [ 51.740370] msm-auxpcm-dev soc:qcom,msm-quin-auxpcm: ASoC: no source widget found for QUIN_AUX_PCM_RX [ 51.743037] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor4: Dropping the link to regulator.55 [ 51.750972] msm-auxpcm-dev soc:qcom,msm-quin-auxpcm: ASoC: Failed to add route QUIN_AUX_PCM_RX -> direct -> Quin AUX PCM Playback [ 51.755147] binder: 1273:1273 ioctl 40046210 7fc87fc754 returned -22 [ 51.761808] CAM_ERR: CAM-CCI: cam_cci_irq: 238 Base:ffffff80195fd000, M0_Q1 NACK ERROR: 0x10000000 [ 51.761940] CAM_ERR: CAM-CCI: cam_cci_read: 1306 ERROR with Slave 0xc0: [ 51.761963] CAM_ERR: CAM-CCI: cam_cci_read_bytes: 1561 failed to read rc:-22 [ 51.761987] CAM_ERR: CAM-SENSOR: cam_cci_i2c_read: 35 rc = -22 [ 51.762003] CAM_WARN: CAM-SENSOR: cam_sensor_match_id: 769 read id: 0x0 expected id 0x6710: [ 51.762019] ------------[ cut here ]------------ [ 51.762027] cam_cc_mclk0_clk already disabled [ 51.762072] WARNING: CPU: 3 PID: 848 at drivers/clk/clk.c:1144 clk_core_disable+0x230/0x270 [ 51.762078] Modules linked in: wlan(O+) machine_dlkm(O) wcd938x_slave_dlkm(O) wcd938x_dlkm(O) wcd9xxx_dlkm(O) mbhc_dlkm(O) tx_macro_dlkm(O) rx_macro_dlkm(O) va_macro_dlkm(O) wsa_macro_dlkm(O) swr_ctrl_dlkm(O) bolero_cdc_dlkm(O) wsa881x_dlkm(O) wcd_core_dlkm(O) stub_dlkm(O) hdmi_dlkm(O) swr_dlkm(O) pinctrl_lpi_dlkm(O) pinctrl_wcd_dlkm(O) usf_dlkm(O) native_dlkm(O) platform_dlkm(O) q6_dlkm(O) adsp_loader_dlkm(O) apr_dlkm(O) snd_event_dlkm(O) q6_notifier_dlkm(O) q6_pdr_dlkm(O) msm_11ad_proxy [ 51.762153] CPU: 3 PID: 848 Comm: android.hardwar Tainted: G S W O 4.19.157+ #1 [ 51.762159] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 51.762165] pstate: 60400085 (nZCv daIf +PAN -UAO) [ 51.762171] pc : clk_core_disable+0x230/0x270 [ 51.762177] lr : clk_core_disable+0x230/0x270 [ 51.762181] sp : ffffff8012ee3970 [ 51.762185] x29: ffffff8012ee3970 x28: ffffffc90bd3a880 [ 51.762193] x27: 0000000000000000 x26: 0000000000000068 [ 51.762201] x25: ffffffa50a9272a8 x24: ffffffa50bf510fa [ 51.762208] x23: ffffffa50bf51082 x22: ffffffc944fc6100 [ 51.762216] x21: 0000000000000000 x20: ffffffc94c564c80 [ 51.762224] x19: ffffffc94c564c80 x18: 0000000000000034 [ 51.762231] x17: ffffffa50d8f4000 x16: 00000000fff9d8a4 [ 51.762239] x15: 000000000009d8a4 x14: ffffffc977e30008 [ 51.762247] x13: 0000000000000000 x12: 00000000000000e0 [ 51.762254] x11: 0000000000000000 x10: 0000000000000001 [ 51.762262] x9 : 450514ed24766500 x8 : 450514ed24766500 [ 51.762270] x7 : ffffffa509d82134 x6 : 0000000000000000 [ 51.762277] x5 : 0000000000000080 x4 : 0000000000000001 [ 51.762284] x3 : 0000000000000000 x2 : 0000000000000007 [ 51.762292] x1 : 0000000000000007 x0 : 0000000000000021 [ 51.762301] Call trace: [ 51.762308] clk_core_disable+0x230/0x270 [ 51.762315] clk_disable+0x34/0x98 [ 51.762324] cam_soc_util_clk_disable+0x4c/0x68 [ 51.762332] cam_sensor_util_power_down+0x258/0x4b8 [ 51.762340] cam_sensor_power_down+0x34/0x130 [ 51.762346] cam_sensor_driver_cmd+0x35c/0x12e0 [ 51.762352] cam_sensor_subdev_ioctl+0x3c/0x80 [ 51.762362] subdev_do_ioctl_lock+0x764/0xbc8 [ 51.762368] video_usercopy+0x38c/0x850 [ 51.762374] subdev_ioctl+0x38/0x48 [ 51.762381] v4l2_ioctl+0x6c/0x80 [ 51.762391] do_vfs_ioctl+0x748/0x1210 [ 51.762397] __arm64_sys_ioctl+0x78/0xa0 [ 51.762405] el0_svc_common+0xa4/0x190 [ 51.762411] el0_svc_handler+0x6c/0x88 [ 51.762418] el0_svc+0x8/0xc [ 51.762423] irq event stamp: 363220 [ 51.762432] hardirqs last enabled at (363219): [] console_trylock_spinning+0x114/0x188 [ 51.762439] hardirqs last disabled at (363220): [] clk_enable_lock+0x20/0xc8 [ 51.762446] softirqs last enabled at (362962): [] __do_softirq+0x50c/0x554 [ 51.762454] softirqs last disabled at (362951): [] irq_exit+0xfc/0x120 [ 51.762459] ---[ end trace 1d70a345b84a8716 ]--- [ 51.762470] ------------[ cut here ]------------ [ 51.762517] cam_cc_mclk0_clk already unprepared [ 51.762558] WARNING: CPU: 3 PID: 848 at drivers/clk/clk.c:981 clk_core_unprepare+0x384/0x400 [ 51.762568] Modules linked in: wlan(O+) machine_dlkm(O) wcd938x_slave_dlkm(O) wcd938x_dlkm(O) wcd9xxx_dlkm(O) mbhc_dlkm(O) tx_macro_dlkm(O) rx_macro_dlkm(O) va_macro_dlkm(O) wsa_macro_dlkm(O) swr_ctrl_dlkm(O) bolero_cdc_dlkm(O) wsa881x_dlkm(O) wcd_core_dlkm(O) stub_dlkm(O) hdmi_dlkm(O) swr_dlkm(O) pinctrl_lpi_dlkm(O) pinctrl_wcd_dlkm(O) usf_dlkm(O) native_dlkm(O) platform_dlkm(O) q6_dlkm(O) adsp_loader_dlkm(O) apr_dlkm(O) snd_event_dlkm(O) q6_notifier_dlkm(O) q6_pdr_dlkm(O) msm_11ad_proxy [ 51.762634] CPU: 3 PID: 848 Comm: android.hardwar Tainted: G S W O 4.19.157+ #1 [ 51.762644] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 51.762654] pstate: 60400005 (nZCv daif +PAN -UAO) [ 51.762664] pc : clk_core_unprepare+0x384/0x400 [ 51.762675] lr : clk_core_unprepare+0x384/0x400 [ 51.762684] sp : ffffff8012ee3960 [ 51.762695] x29: ffffff8012ee3960 x28: ffffffc90bd3a880 [ 51.762714] x27: 0000000000000000 x26: 0000000000000068 [ 51.762732] x25: ffffffa50a9272a8 x24: ffffffa50bf510fa [ 51.762751] x23: ffffffa50bf51082 x22: ffffffc944fc6100 [ 51.762769] x21: ffffffa50e178000 x20: ffffffa50e178000 [ 51.762787] x19: ffffffc94c564c80 x18: 0000000000000034 [ 51.762805] x17: ffffffa50d8f4000 x16: 00000000fff9cbfc [ 51.762824] x15: 000000000009cbfc x14: ffffffc977e30008 [ 51.762841] x13: 0000000000000004 x12: 000000003b276a85 [ 51.762859] x11: 0000000000000015 x10: 000000000682aaab [ 51.762878] x9 : 450514ed24766500 x8 : 450514ed24766500 [ 51.762897] x7 : ffffffa509d82134 x6 : 0000000000000000 [ 51.762915] x5 : 0000000000000080 x4 : 0000000000000001 [ 51.762933] x3 : ffffff8012ee3588 x2 : 0000000000000007 [ 51.762951] x1 : ffffffa509d82874 x0 : 0000000000000023 [ 51.762970] Call trace: [ 51.762981] clk_core_unprepare+0x384/0x400 [ 51.762992] clk_unprepare+0x88/0x108 [ 51.763003] cam_soc_util_clk_disable+0x54/0x68 [ 51.763013] cam_sensor_util_power_down+0x258/0x4b8 [ 51.763024] cam_sensor_power_down+0x34/0x130 [ 51.763034] cam_sensor_driver_cmd+0x35c/0x12e0 [ 51.763045] cam_sensor_subdev_ioctl+0x3c/0x80 [ 51.763056] subdev_do_ioctl_lock+0x764/0xbc8 [ 51.763067] video_usercopy+0x38c/0x850 [ 51.763079] subdev_ioctl+0x38/0x48 [ 51.763090] v4l2_ioctl+0x6c/0x80 [ 51.763101] do_vfs_ioctl+0x748/0x1210 [ 51.763112] __arm64_sys_ioctl+0x78/0xa0 [ 51.763122] el0_svc_common+0xa4/0x190 [ 51.763136] el0_svc_handler+0x6c/0x88 [ 51.763151] el0_svc+0x8/0xc [ 51.763163] irq event stamp: 363234 [ 51.763179] hardirqs last enabled at (363233): [] console_trylock_spinning+0x114/0x188 [ 51.763194] hardirqs last disabled at (363234): [] do_debug_exception+0x84/0x150 [ 51.763208] softirqs last enabled at (362962): [] __do_softirq+0x50c/0x554 [ 51.763223] softirqs last disabled at (362951): [] irq_exit+0xfc/0x120 [ 51.763235] ---[ end trace 1d70a345b84a8717 ]--- [ 51.763617] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor4: Dropping the link to regulator.77 [ 51.763896] msm-auxpcm-dev soc:qcom,msm-quin-auxpcm: ASoC: no sink widget found for QUIN_AUX_PCM_TX [ 51.767947] CAM_ERR: CAM-UTIL: cam_soc_util_regulator_disable: 1415 Invalid NULL parameter [ 51.773714] msm-auxpcm-dev soc:qcom,msm-quin-auxpcm: ASoC: Failed to add route Quin AUX PCM Capture -> direct -> QUIN_AUX_PCM_TX [ 51.776968] CAM_ERR: CAM-SENSOR: cam_sensor_util_power_down: 2290 Reg: cam_vio disable failed [ 51.786649] CAM_ERR: CAM-UTIL: cam_soc_util_regulator_disable: 1415 Invalid NULL parameter [ 51.786721] CAM_ERR: CAM-SENSOR: cam_sensor_util_power_down: 2290 Reg: cam_vana disable failed [ 51.786849] msm-auxpcm-dev soc:qcom,msm-sen-auxpcm: ASoC: no source widget found for SEN_AUX_PCM_RX [ 51.787674] ------------[ cut here ]------------ [ 51.796590] unbalanced disables for titan_top_gdsc [ 51.796650] WARNING: CPU: 0 PID: 848 at drivers/regulator/core.c:2401 _regulator_disable+0x1a0/0x1b0 [ 51.796662] Modules linked in: wlan(O+) machine_dlkm(O) wcd938x_slave_dlkm(O) wcd938x_dlkm(O) wcd9xxx_dlkm(O) mbhc_dlkm(O) tx_macro_dlkm(O) rx_macro_dlkm(O) va_macro_dlkm(O) wsa_macro_dlkm(O) swr_ctrl_dlkm(O) bolero_cdc_dlkm(O) wsa881x_dlkm(O) wcd_core_dlkm(O) stub_dlkm(O) hdmi_dlkm(O) swr_dlkm(O) pinctrl_lpi_dlkm(O) pinctrl_wcd_dlkm(O) usf_dlkm(O) native_dlkm(O) platform_dlkm(O) q6_dlkm(O) adsp_loader_dlkm(O) apr_dlkm(O) snd_event_dlkm(O) q6_notifier_dlkm(O) q6_pdr_dlkm(O) msm_11ad_proxy [ 51.796749] CPU: 0 PID: 848 Comm: android.hardwar Tainted: G S W O 4.19.157+ #1 [ 51.796762] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 51.796777] pstate: 60400005 (nZCv daif +PAN -UAO) [ 51.796790] pc : _regulator_disable+0x1a0/0x1b0 [ 51.796802] lr : _regulator_disable+0x19c/0x1b0 [ 51.796814] sp : ffffff8012ee33d0 [ 51.796826] x29: ffffff8012ee33d0 x28: 0000000000000000 [ 51.796838] msm-auxpcm-dev soc:qcom,msm-sen-auxpcm: ASoC: Failed to add route SEN_AUX_PCM_RX -> direct -> Sen AUX PCM Playback [ 51.796844] x27: 0000007fc45213c0 x26: ffffffc944c9c000 [ 51.808561] x25: ffffffa50a9272a8 x24: ffffffc914d14b40 [ 51.808583] x23: ffffffc944c9ed18 x22: ffffffc944ca5bf0 [ 51.808604] x21: ffffffc94c4549a8 x20: 00000000fffffffb [ 51.808625] x19: ffffffc94c454880 x18: 0000000000000038 [ 51.808646] x17: ffffffa50d8f4000 x16: 00000000fff9bb14 [ 51.808668] x15: 000000000009bb14 x14: 00000000000000c2 [ 51.808691] x13: 0000000000000004 x12: 000000003b316669 [ 51.808716] x11: 0000000000000015 x10: 000000000682aaab [ 51.808739] x9 : 450514ed24766500 x8 : 450514ed24766500 [ 51.808759] x7 : ffffffa509d82700 x6 : 0000000000000000 [ 51.808780] x5 : 0000000000000080 x4 : 0000000000000001 [ 51.808801] x3 : ffffff8012ee2ff8 x2 : 0000000000000007 [ 51.808821] x1 : ffffffa509d82874 x0 : 0000000000000026 [ 51.808844] Call trace: [ 51.808859] _regulator_disable+0x1a0/0x1b0 [ 51.808874] regulator_disable+0x3c/0x88 [ 51.808892] cam_soc_util_disable_platform_resource+0xb0/0x100 [ 51.808907] cam_cpas_soc_disable_resources+0x30/0x78 [ 51.808920] cam_cpas_hw_stop+0x2a0/0x4e0 [ 51.808934] cam_cpas_stop+0x58/0x110 [ 51.808950] cam_cci_soc_release+0x110/0x1a0 [ 51.808964] cam_cci_core_cfg+0x14c/0x15e8 [ 51.808977] cam_cci_subdev_ioctl+0x50/0xc0 [ 51.808990] cam_sensor_cci_i2c_util+0x60/0xd0 [ 51.809003] camera_io_release+0x38/0x88 [ 51.809018] cam_sensor_power_down+0x64/0x130 [ 51.809032] cam_sensor_driver_cmd+0x35c/0x12e0 [ 51.809046] cam_sensor_subdev_ioctl+0x3c/0x80 [ 51.809065] subdev_do_ioctl_lock+0x764/0xbc8 [ 51.809079] video_usercopy+0x38c/0x850 [ 51.809092] subdev_ioctl+0x38/0x48 [ 51.809108] v4l2_ioctl+0x6c/0x80 [ 51.809125] do_vfs_ioctl+0x748/0x1210 [ 51.809138] __arm64_sys_ioctl+0x78/0xa0 [ 51.809154] el0_svc_common+0xa4/0x190 [ 51.809167] el0_svc_handler+0x6c/0x88 [ 51.809182] el0_svc+0x8/0xc [ 51.809196] irq event stamp: 363594 [ 51.809213] hardirqs last enabled at (363593): [] console_unlock+0x4bc/0x568 [ 51.809227] hardirqs last disabled at (363594): [] do_debug_exception+0x84/0x150 [ 51.809241] softirqs last enabled at (363582): [] __do_softirq+0x50c/0x554 [ 51.809257] softirqs last disabled at (363563): [] irq_exit+0xfc/0x120 [ 51.809270] ---[ end trace 1d70a345b84a8718 ]--- [ 51.809366] msm-auxpcm-dev soc:qcom,msm-sen-auxpcm: ASoC: no sink widget found for SEN_AUX_PCM_TX [ 51.811007] binder: 1157:1157 ioctl 40046210 7fc826c0f4 returned -22 [ 51.818708] msm-auxpcm-dev soc:qcom,msm-sen-auxpcm: ASoC: Failed to add route Sen AUX PCM Capture -> direct -> SEN_AUX_PCM_TX [ 51.831323] msm-dai-q6-hdmi soc:qcom,msm-dai-q6-dp: DAI driver id is not set [ 51.853609] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor0: Linked as a consumer to regulator.55 [ 51.861496] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor0: Linked as a consumer to regulator.57 [ 51.862886] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor0: Linked as a consumer to regulator.77 [ 51.862918] CAM_ERR: CAM-UTIL: cam_soc_util_regulator_enable: 1459 cam_clk set voltage failed [ 51.862938] CAM_ERR: CAM-SENSOR: cam_sensor_core_power_up: 1928 Reg enable failed [ 51.862955] CAM_ERR: CAM-SENSOR: cam_sensor_core_power_up: 2062 failed [ 51.863408] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor0: Dropping the link to regulator.57 [ 51.863509] CAM_ERR: CAM-SENSOR: cam_sensor_core_power_up: 2131 seq_val:100 > num_vreg: 4 [ 51.866049] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor0: Dropping the link to regulator.55 [ 51.896606] CAM_ERR: CAM-CCI: cam_cci_irq: 238 Base:ffffff80195fd000, M0_Q1 NACK ERROR: 0x10000000 [ 51.896740] CAM_ERR: CAM-CCI: cam_cci_read: 1306 ERROR with Slave 0xc0: [ 51.896766] CAM_ERR: CAM-CCI: cam_cci_read_bytes: 1561 failed to read rc:-22 [ 51.896785] CAM_ERR: CAM-SENSOR: cam_cci_i2c_read: 35 rc = -22 [ 51.896802] CAM_WARN: CAM-SENSOR: cam_sensor_match_id: 769 read id: 0x0 expected id 0x6710: [ 51.896822] ------------[ cut here ]------------ [ 51.896830] cam_cc_mclk0_clk already disabled [ 51.896877] WARNING: CPU: 1 PID: 848 at drivers/clk/clk.c:1144 clk_core_disable+0x230/0x270 [ 51.896884] Modules linked in: wlan(O+) machine_dlkm(O) wcd938x_slave_dlkm(O) wcd938x_dlkm(O) wcd9xxx_dlkm(O) mbhc_dlkm(O) tx_macro_dlkm(O) rx_macro_dlkm(O) va_macro_dlkm(O) wsa_macro_dlkm(O) swr_ctrl_dlkm(O) bolero_cdc_dlkm(O) wsa881x_dlkm(O) wcd_core_dlkm(O) stub_dlkm(O) hdmi_dlkm(O) swr_dlkm(O) pinctrl_lpi_dlkm(O) pinctrl_wcd_dlkm(O) usf_dlkm(O) native_dlkm(O) platform_dlkm(O) q6_dlkm(O) adsp_loader_dlkm(O) apr_dlkm(O) snd_event_dlkm(O) q6_notifier_dlkm(O) q6_pdr_dlkm(O) msm_11ad_proxy [ 51.896963] CPU: 1 PID: 848 Comm: android.hardwar Tainted: G S W O 4.19.157+ #1 [ 51.896971] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 51.896980] pstate: 60400085 (nZCv daIf +PAN -UAO) [ 51.896989] pc : clk_core_disable+0x230/0x270 [ 51.896998] lr : clk_core_disable+0x230/0x270 [ 51.897005] sp : ffffff8012ee3970 [ 51.897012] x29: ffffff8012ee3970 x28: ffffffc90bd3c680 [ 51.897023] x27: 0000000000000000 x26: 0000000000000068 [ 51.897033] x25: ffffffa50a9272a8 x24: ffffffa50bf510fa [ 51.897043] x23: ffffffa50bf51082 x22: ffffffc944fb8a80 [ 51.897053] x21: 0000000000000000 x20: ffffffc94c564c80 [ 51.897064] x19: ffffffc94c564c80 x18: 0000000000000034 [ 51.897074] x17: ffffffa50d8f4000 x16: 00000000fff9a3bc [ 51.897084] x15: 000000000009a3bc x14: 00000000000000c2 [ 51.897094] x13: 0000000000000000 x12: 00000000000000e0 [ 51.897105] x11: 0000000000000000 x10: 0000000000000001 [ 51.897115] x9 : 450514ed24766500 x8 : 450514ed24766500 [ 51.897125] x7 : ffffffa509d82700 x6 : 0000000000000000 [ 51.897135] x5 : 0000000000000080 x4 : 0000000000000001 [ 51.897145] x3 : 0000000000000000 x2 : 0000000000000007 [ 51.897155] x1 : 0000000000000007 x0 : 0000000000000021 [ 51.897166] Call trace: [ 51.897176] clk_core_disable+0x230/0x270 [ 51.897186] clk_disable+0x34/0x98 [ 51.897197] cam_soc_util_clk_disable+0x4c/0x68 [ 51.897207] cam_sensor_util_power_down+0x258/0x4b8 [ 51.897218] cam_sensor_power_down+0x34/0x130 [ 51.897226] cam_sensor_driver_cmd+0x35c/0x12e0 [ 51.897235] cam_sensor_subdev_ioctl+0x3c/0x80 [ 51.897247] subdev_do_ioctl_lock+0x764/0xbc8 [ 51.897256] video_usercopy+0x38c/0x850 [ 51.897265] subdev_ioctl+0x38/0x48 [ 51.897275] v4l2_ioctl+0x6c/0x80 [ 51.897286] do_vfs_ioctl+0x748/0x1210 [ 51.897295] __arm64_sys_ioctl+0x78/0xa0 [ 51.897306] el0_svc_common+0xa4/0x190 [ 51.897315] el0_svc_handler+0x6c/0x88 [ 51.897324] el0_svc+0x8/0xc [ 51.897332] irq event stamp: 367566 [ 51.897343] hardirqs last enabled at (367565): [] console_unlock+0x4bc/0x568 [ 51.897352] hardirqs last disabled at (367566): [] clk_enable_lock+0x20/0xc8 [ 51.897361] softirqs last enabled at (366546): [] __do_softirq+0x50c/0x554 [ 51.897372] softirqs last disabled at (366529): [] irq_exit+0xfc/0x120 [ 51.897379] ---[ end trace 1d70a345b84a8719 ]--- [ 51.897394] ------------[ cut here ]------------ [ 51.897410] cam_cc_mclk0_clk already unprepared [ 51.897453] WARNING: CPU: 1 PID: 848 at drivers/clk/clk.c:981 clk_core_unprepare+0x384/0x400 [ 51.897464] Modules linked in: wlan(O+) machine_dlkm(O) wcd938x_slave_dlkm(O) wcd938x_dlkm(O) wcd9xxx_dlkm(O) mbhc_dlkm(O) tx_macro_dlkm(O) rx_macro_dlkm(O) va_macro_dlkm(O) wsa_macro_dlkm(O) swr_ctrl_dlkm(O) bolero_cdc_dlkm(O) wsa881x_dlkm(O) wcd_core_dlkm(O) stub_dlkm(O) hdmi_dlkm(O) swr_dlkm(O) pinctrl_lpi_dlkm(O) pinctrl_wcd_dlkm(O) usf_dlkm(O) native_dlkm(O) platform_dlkm(O) q6_dlkm(O) adsp_loader_dlkm(O) apr_dlkm(O) snd_event_dlkm(O) q6_notifier_dlkm(O) q6_pdr_dlkm(O) msm_11ad_proxy [ 51.897535] CPU: 1 PID: 848 Comm: android.hardwar Tainted: G S W O 4.19.157+ #1 [ 51.897547] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 51.897560] pstate: 60400005 (nZCv daif +PAN -UAO) [ 51.897573] pc : clk_core_unprepare+0x384/0x400 [ 51.897587] lr : clk_core_unprepare+0x384/0x400 [ 51.897598] sp : ffffff8012ee3960 [ 51.897610] x29: ffffff8012ee3960 x28: ffffffc90bd3c680 [ 51.897631] x27: 0000000000000000 x26: 0000000000000068 [ 51.897652] x25: ffffffa50a9272a8 x24: ffffffa50bf510fa [ 51.897674] x23: ffffffa50bf51082 x22: ffffffc944fb8a80 [ 51.897695] x21: ffffffa50e178000 x20: ffffffa50e178000 [ 51.897715] x19: ffffffc94c564c80 x18: 0000000000000034 [ 51.897736] x17: ffffffa50d8f4000 x16: 00000000fff99720 [ 51.897757] x15: 0000000000099720 x14: 00000000000000c2 [ 51.897778] x13: 0000000000000004 x12: 000000003b4eefb1 [ 51.897798] x11: 0000000000000015 x10: 000000000682aaab [ 51.897820] x9 : 450514ed24766500 x8 : 450514ed24766500 [ 51.897841] x7 : ffffffa509d82700 x6 : 0000000000000000 [ 51.897862] x5 : 0000000000000080 x4 : 0000000000000001 [ 51.897882] x3 : ffffff8012ee3588 x2 : 0000000000000007 [ 51.897903] x1 : ffffffa509d82874 x0 : 0000000000000023 [ 51.897924] Call trace: [ 51.897937] clk_core_unprepare+0x384/0x400 [ 51.897951] clk_unprepare+0x88/0x108 [ 51.897965] cam_soc_util_clk_disable+0x54/0x68 [ 51.897978] cam_sensor_util_power_down+0x258/0x4b8 [ 51.897991] cam_sensor_power_down+0x34/0x130 [ 51.898005] cam_sensor_driver_cmd+0x35c/0x12e0 [ 51.898018] cam_sensor_subdev_ioctl+0x3c/0x80 [ 51.898032] subdev_do_ioctl_lock+0x764/0xbc8 [ 51.898045] video_usercopy+0x38c/0x850 [ 51.898058] subdev_ioctl+0x38/0x48 [ 51.898071] v4l2_ioctl+0x6c/0x80 [ 51.898084] do_vfs_ioctl+0x748/0x1210 [ 51.898098] __arm64_sys_ioctl+0x78/0xa0 [ 51.898111] el0_svc_common+0xa4/0x190 [ 51.898124] el0_svc_handler+0x6c/0x88 [ 51.898138] el0_svc+0x8/0xc [ 51.898150] irq event stamp: 367580 [ 51.898163] hardirqs last enabled at (367579): [] console_unlock+0x4bc/0x568 [ 51.898177] hardirqs last disabled at (367580): [] do_debug_exception+0x84/0x150 [ 51.898190] softirqs last enabled at (366546): [] __do_softirq+0x50c/0x554 [ 51.898204] softirqs last disabled at (366529): [] irq_exit+0xfc/0x120 [ 51.898215] ---[ end trace 1d70a345b84a871a ]--- [ 51.898616] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor0: Dropping the link to regulator.77 [ 51.902744] CAM_ERR: CAM-UTIL: cam_soc_util_regulator_disable: 1415 Invalid NULL parameter [ 51.902765] CAM_ERR: CAM-SENSOR: cam_sensor_util_power_down: 2290 Reg: cam_vio disable failed [ 51.902783] CAM_ERR: CAM-UTIL: cam_soc_util_regulator_disable: 1415 Invalid NULL parameter [ 51.902799] CAM_ERR: CAM-SENSOR: cam_sensor_util_power_down: 2290 Reg: cam_vana disable failed [ 51.903765] ------------[ cut here ]------------ [ 51.903784] unbalanced disables for titan_top_gdsc [ 51.903841] WARNING: CPU: 1 PID: 848 at drivers/regulator/core.c:2401 _regulator_disable+0x1a0/0x1b0 [ 51.903855] Modules linked in: wlan(O+) machine_dlkm(O) wcd938x_slave_dlkm(O) wcd938x_dlkm(O) wcd9xxx_dlkm(O) mbhc_dlkm(O) tx_macro_dlkm(O) rx_macro_dlkm(O) va_macro_dlkm(O) wsa_macro_dlkm(O) swr_ctrl_dlkm(O) bolero_cdc_dlkm(O) wsa881x_dlkm(O) wcd_core_dlkm(O) stub_dlkm(O) hdmi_dlkm(O) swr_dlkm(O) pinctrl_lpi_dlkm(O) pinctrl_wcd_dlkm(O) usf_dlkm(O) native_dlkm(O) platform_dlkm(O) q6_dlkm(O) adsp_loader_dlkm(O) apr_dlkm(O) snd_event_dlkm(O) q6_notifier_dlkm(O) q6_pdr_dlkm(O) msm_11ad_proxy [ 51.903946] CPU: 1 PID: 848 Comm: android.hardwar Tainted: G S W O 4.19.157+ #1 [ 51.903958] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 51.903973] pstate: 60400005 (nZCv daif +PAN -UAO) [ 51.903986] pc : _regulator_disable+0x1a0/0x1b0 [ 51.903999] lr : _regulator_disable+0x19c/0x1b0 [ 51.904013] sp : ffffff8012ee33d0 [ 51.904025] x29: ffffff8012ee33d0 x28: 0000000000000000 [ 51.904049] x27: 0000007fc45213c0 x26: ffffffc944c9c000 [ 51.904070] x25: ffffffa50a9272a8 x24: ffffffc914d13c40 [ 51.904092] x23: ffffffc944c9ed18 x22: ffffffc944ca5bf0 [ 51.904114] x21: ffffffc94c4549a8 x20: 00000000fffffffb [ 51.904135] x19: ffffffc94c454880 x18: 0000000000000038 [ 51.904156] x17: ffffffa50d8f4000 x16: 00000000fff9884c [ 51.904177] x15: 000000000009884c x14: 00000000000000c2 [ 51.904199] x13: 0000000000000004 x12: 000000003b50cdcd [ 51.904220] x11: 0000000000000015 x10: 000000000682aaab [ 51.904242] x9 : 450514ed24766500 x8 : 450514ed24766500 [ 51.904266] x7 : ffffffa509d82700 x6 : 0000000000000000 [ 51.904287] x5 : 0000000000000080 x4 : 0000000000000001 [ 51.904310] x3 : ffffff8012ee2ff8 x2 : 0000000000000007 [ 51.904331] x1 : ffffffa509d82874 x0 : 0000000000000026 [ 51.904353] Call trace: [ 51.904367] _regulator_disable+0x1a0/0x1b0 [ 51.904383] regulator_disable+0x3c/0x88 [ 51.904401] cam_soc_util_disable_platform_resource+0xb0/0x100 [ 51.904416] cam_cpas_soc_disable_resources+0x30/0x78 [ 51.904430] cam_cpas_hw_stop+0x2a0/0x4e0 [ 51.904443] cam_cpas_stop+0x58/0x110 [ 51.904458] cam_cci_soc_release+0x110/0x1a0 [ 51.904470] cam_cci_core_cfg+0x14c/0x15e8 [ 51.904484] cam_cci_subdev_ioctl+0x50/0xc0 [ 51.904497] cam_sensor_cci_i2c_util+0x60/0xd0 [ 51.904509] camera_io_release+0x38/0x88 [ 51.904524] cam_sensor_power_down+0x64/0x130 [ 51.904537] cam_sensor_driver_cmd+0x35c/0x12e0 [ 51.904551] cam_sensor_subdev_ioctl+0x3c/0x80 [ 51.904568] subdev_do_ioctl_lock+0x764/0xbc8 [ 51.904581] video_usercopy+0x38c/0x850 [ 51.904595] subdev_ioctl+0x38/0x48 [ 51.904609] v4l2_ioctl+0x6c/0x80 [ 51.904626] do_vfs_ioctl+0x748/0x1210 [ 51.904640] __arm64_sys_ioctl+0x78/0xa0 [ 51.904655] el0_svc_common+0xa4/0x190 [ 51.904669] el0_svc_handler+0x6c/0x88 [ 51.904683] el0_svc+0x8/0xc [ 51.904696] irq event stamp: 367854 [ 51.904713] hardirqs last enabled at (367853): [] console_unlock+0x4bc/0x568 [ 51.904727] hardirqs last disabled at (367854): [] do_debug_exception+0x84/0x150 [ 51.904741] softirqs last enabled at (366546): [] __do_softirq+0x50c/0x554 [ 51.904756] softirqs last disabled at (366529): [] irq_exit+0xfc/0x120 [ 51.904768] ---[ end trace 1d70a345b84a871b ]--- [ 51.924821] binder: 1293:1293 ioctl 40046210 7ff7a0c604 returned -22 [ 51.936515] binder: 1296:1296 ioctl 40046210 7fcdf859d4 returned -22 [ 51.943191] qcom,camera ac50000.qcom,cci:qcom,cam-sensor2: Linked as a consumer to regulator.56 [ 51.947687] qcom,camera ac50000.qcom,cci:qcom,cam-sensor2: Linked as a consumer to regulator.57 [ 51.948955] binder: 1299:1299 ioctl 40046210 7ff0d2fad4 returned -22 [ 51.949539] qcom,camera ac50000.qcom,cci:qcom,cam-sensor2: Linked as a consumer to regulator.54 [ 51.970931] qcom,camera ac50000.qcom,cci:qcom,cam-sensor2: Linked as a consumer to regulator.77 [ 51.989040] CAM_ERR: CAM-CCI: cam_cci_irq: 238 Base:ffffff80197f5000, M0_Q1 NACK ERROR: 0x10000000 [ 51.989167] CAM_ERR: CAM-CCI: cam_cci_read: 1306 ERROR with Slave 0x20: [ 51.989198] CAM_ERR: CAM-CCI: cam_cci_read_bytes: 1561 failed to read rc:-22 [ 51.989218] CAM_ERR: CAM-SENSOR: cam_cci_i2c_read: 35 rc = -22 [ 51.989238] CAM_WARN: CAM-SENSOR: cam_sensor_match_id: 769 read id: 0x0 expected id 0x3841: [ 51.989776] qcom,camera ac50000.qcom,cci:qcom,cam-sensor2: Dropping the link to regulator.77 [ 51.994700] qcom,camera ac50000.qcom,cci:qcom,cam-sensor2: Dropping the link to regulator.54 [ 51.995213] qcom,camera ac50000.qcom,cci:qcom,cam-sensor2: Dropping the link to regulator.57 [ 51.995765] qcom,camera ac50000.qcom,cci:qcom,cam-sensor2: Dropping the link to regulator.56 [ 52.057539] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor1: Linked as a consumer to regulator.56 [ 52.078213] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor1: Linked as a consumer to regulator.53 [ 52.083565] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor1: Linked as a consumer to regulator.57 [ 52.085675] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor1: Linked as a consumer to regulator.77 [ 52.091362] swr-wcd rx_swr_ctrl: DMA mask not set [ 52.120930] binder: 1315:1315 ioctl 40046210 7ffc98eb64 returned -22 [ 52.120968] CAM_ERR: CAM-CCI: cam_cci_irq: 264 Base:ffffff80195fd000, M1_Q1 NACK ERROR: 0x40000000 [ 52.120972] swr-wcd wsa_swr_ctrl: DMA mask not set [ 52.121227] CAM_ERR: CAM-CCI: cam_cci_read: 1306 ERROR with Slave 0xc0: [ 52.121253] CAM_ERR: CAM-CCI: cam_cci_read_bytes: 1561 failed to read rc:-22 [ 52.121270] CAM_ERR: CAM-SENSOR: cam_cci_i2c_read: 35 rc = -22 [ 52.121288] CAM_WARN: CAM-SENSOR: cam_sensor_match_id: 769 read id: 0x0 expected id 0x6710: [ 52.122369] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor1: Dropping the link to regulator.77 [ 52.128135] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor1: Dropping the link to regulator.57 [ 52.136930] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor1: Dropping the link to regulator.53 [ 52.137463] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor1: Dropping the link to regulator.56 [ 52.190759] binder: 1323:1323 ioctl 40046210 7ff482e164 returned -22 [ 52.192198] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor5: Linked as a consumer to regulator.56 [ 52.195735] binder: 1323:1323 ioctl 40046210 7ff482e0e4 returned -22 [ 52.197492] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor5: Linked as a consumer to regulator.53 [ 52.209280] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor5: Linked as a consumer to regulator.57 [ 52.217445] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor5: Linked as a consumer to regulator.77 [ 52.220026] binder: 1326:1326 ioctl 40046210 7fd99714f4 returned -22 [ 52.228922] swr-wcd rx_swr_ctrl: swrm_get_logical_dev_num: device 0xd01170224 is not ready [ 52.239228] swr-wcd wsa_swr_ctrl: swrm_get_logical_dev_num: device 0x1020170211 is not ready [ 52.251797] CAM_ERR: CAM-CCI: cam_cci_irq: 264 Base:ffffff80195fd000, M1_Q1 NACK ERROR: 0x40000000 [ 52.251929] CAM_ERR: CAM-CCI: cam_cci_read: 1306 ERROR with Slave 0xc0: [ 52.251954] CAM_ERR: CAM-CCI: cam_cci_read_bytes: 1561 failed to read rc:-22 [ 52.251972] CAM_ERR: CAM-SENSOR: cam_cci_i2c_read: 35 rc = -22 [ 52.251990] CAM_WARN: CAM-SENSOR: cam_sensor_match_id: 769 read id: 0x0 expected id 0x6710: [ 52.252649] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor5: Dropping the link to regulator.77 [ 52.260711] swr_get_logical_dev_num: Error -22 to get logical addr for device d01170224 [ 52.262376] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor5: Dropping the link to regulator.57 [ 52.269104] swr_get_logical_dev_num: Error -22 to get logical addr for device 1020170211 [ 52.281112] swr-wcd rx_swr_ctrl: swrm_get_logical_dev_num: device 0xd01170224 is not ready [ 52.300567] swr_get_logical_dev_num: Error -22 to get logical addr for device d01170224 [ 52.310914] wsa881x: probe of wsa881x.1020170211 failed with error -22 [ 52.311130] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor5: Dropping the link to regulator.53 [ 52.311650] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor5: Dropping the link to regulator.56 [ 52.321251] swr-wcd wsa_swr_ctrl: swrm_get_logical_dev_num: device 0x1020170212 is not ready [ 52.336557] swr_get_logical_dev_num: Error -22 to get logical addr for device 1020170212 [ 52.345482] swr-wcd rx_swr_ctrl: swrm_get_logical_dev_num: device 0xd01170224 is not ready [ 52.355914] binder: 1307:1307 ioctl 40046210 7fd2fd88f4 returned -22 [ 52.360396] swr_get_logical_dev_num: Error -22 to get logical addr for device d01170224 [ 52.368515] qcom,camera ac50000.qcom,cci:qcom,cam-sensor3: Linked as a consumer to regulator.57 [ 52.368736] binder: 1321:1321 ioctl 40046210 7fdac10b64 returned -22 [ 52.377919] wsa881x: probe of wsa881x.1020170212 failed with error -22 [ 52.381181] qcom,camera ac50000.qcom,cci:qcom,cam-sensor3: Linked as a consumer to regulator.86 [ 52.386949] binder: 1317:1317 ioctl 40046210 ffba9698 returned -22 [ 52.388443] swr-wcd rx_swr_ctrl: swrm_get_logical_dev_num: device 0xd01170224 is not ready [ 52.390073] binder: 1317:1317 ioctl 40046210 ffba9680 returned -22 [ 52.401703] qcom,camera ac50000.qcom,cci:qcom,cam-sensor3: Linked as a consumer to regulator.77 [ 52.402937] swr-wcd wsa_swr_ctrl: swrm_get_logical_dev_num: device 0x1021170213 is not ready [ 52.411961] swr_get_logical_dev_num: Error -22 to get logical addr for device d01170224 [ 52.424397] swr_get_logical_dev_num: Error -22 to get logical addr for device 1021170213 [ 52.440656] swr-wcd rx_swr_ctrl: swrm_get_logical_dev_num: device 0xd01170224 is not ready [ 52.457982] wsa881x: probe of wsa881x.1021170213 failed with error -22 [ 52.463675] swr_get_logical_dev_num: Error -22 to get logical addr for device d01170224 [ 52.476466] swr-wcd wsa_swr_ctrl: swrm_get_logical_dev_num: device 0x1021170214 is not ready [ 52.492479] wcd938x_codec wcd938x-codec: wcd938x_bind: Slave bind failed, ret = -517 [ 52.501394] swr_get_logical_dev_num: Error -22 to get logical addr for device 1021170214 [ 52.519774] CAM_ERR: CAM-CCI: cam_cci_irq: 264 Base:ffffff80197f5000, M1_Q1 NACK ERROR: 0x40000000 [ 52.519887] CAM_ERR: CAM-CCI: cam_cci_read: 1306 ERROR with Slave 0x7a: [ 52.519913] CAM_ERR: CAM-CCI: cam_cci_read_bytes: 1561 failed to read rc:-22 [ 52.519931] CAM_ERR: CAM-SENSOR: cam_cci_i2c_read: 35 rc = -22 [ 52.519949] CAM_WARN: CAM-SENSOR: cam_sensor_match_id: 769 read id: 0x0 expected id 0x30: [ 52.521801] i2c_geni 980000.i2c: i2c error :-107 [ 52.522481] qcom,camera ac50000.qcom,cci:qcom,cam-sensor3: Dropping the link to regulator.77 [ 52.532452] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x00 [ 52.536713] wsa881x: probe of wsa881x.1021170214 failed with error -22 [ 52.540437] qcom,camera ac50000.qcom,cci:qcom,cam-sensor3: Dropping the link to regulator.86 [ 52.551529] lan743x 0001:01:00.0 eth0: using MSIX interrupts, number of vectors = 6 [ 52.555746] i2c_geni 980000.i2c: i2c error :-107 [ 52.560669] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 52.574953] qcom,camera ac50000.qcom,cci:qcom,cam-sensor3: Dropping the link to regulator.57 [ 52.577484] mv2112_config_aneg: autoneg 1 [ 52.577516] mv2112_restart_aneg [ 52.601807] lan743x 0001:01:00.0 eth0: successfully registered ptp clock [ 52.622454] qcom,camera ac50000.qcom,cci:qcom,cam-sensor2: Linked as a consumer to regulator.56 [ 52.625620] qcom,camera ac50000.qcom,cci:qcom,cam-sensor2: Linked as a consumer to regulator.54 [ 52.629745] qcom,camera ac50000.qcom,cci:qcom,cam-sensor2: Linked as a consumer to regulator.57 [ 52.631586] qcom,camera ac50000.qcom,cci:qcom,cam-sensor2: Linked as a consumer to regulator.77 [ 52.658422] CAM_ERR: CAM-CCI: cam_cci_irq: 238 Base:ffffff80197f5000, M0_Q1 NACK ERROR: 0x10000000 [ 52.658553] CAM_ERR: CAM-CCI: cam_cci_read: 1306 ERROR with Slave 0x34: [ 52.658580] CAM_ERR: CAM-CCI: cam_cci_read_bytes: 1561 failed to read rc:-22 [ 52.658598] CAM_ERR: CAM-SENSOR: cam_cci_i2c_read: 35 rc = -22 [ 52.658615] CAM_WARN: CAM-SENSOR: cam_sensor_match_id: 769 read id: 0x0 expected id 0x476: [ 52.659068] qcom,camera ac50000.qcom,cci:qcom,cam-sensor2: Dropping the link to regulator.77 [ 52.663110] qcom,camera ac50000.qcom,cci:qcom,cam-sensor2: Dropping the link to regulator.57 [ 52.663644] qcom,camera ac50000.qcom,cci:qcom,cam-sensor2: Dropping the link to regulator.54 [ 52.664149] qcom,camera ac50000.qcom,cci:qcom,cam-sensor2: Dropping the link to regulator.56 [ 52.684592] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 52.700130] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor5: Linked as a consumer to regulator.56 [ 52.707122] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor5: Linked as a consumer to regulator.57 [ 52.713659] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor5: Linked as a consumer to regulator.53 [ 52.735258] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor5: Linked as a consumer to regulator.77 [ 52.752521] CAM_ERR: CAM-CCI: cam_cci_irq: 264 Base:ffffff80195fd000, M1_Q1 NACK ERROR: 0x40000000 [ 52.752641] CAM_ERR: CAM-CCI: cam_cci_read: 1306 ERROR with Slave 0x20: [ 52.752666] CAM_ERR: CAM-CCI: cam_cci_read_bytes: 1561 failed to read rc:-22 [ 52.752683] CAM_ERR: CAM-SENSOR: cam_cci_i2c_read: 35 rc = -22 [ 52.752701] CAM_WARN: CAM-SENSOR: cam_sensor_match_id: 769 read id: 0x0 expected id 0x30d5: [ 52.753111] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor5: Dropping the link to regulator.77 [ 52.758115] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor5: Dropping the link to regulator.53 [ 52.758664] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor5: Dropping the link to regulator.57 [ 52.759272] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor5: Dropping the link to regulator.56 [ 52.793292] bolero-codec soc:qcom,msm-audio-apr:qcom,q6core-audio:bolero-cdc: ASoC: unknown pin WSA AIF VI [ 52.814559] qcom,camera ac50000.qcom,cci:qcom,cam-sensor6: Linked as a consumer to regulator.56 [ 52.816033] mv2112_read_status [ 52.817114] mv2112_update_link: 3.0x901(1G): 0x880 [ 52.817361] mv2112_update_link: 3.0x8109(100M): 0x0 [ 52.817381] mv2112_update_link: link 0x0 [ 52.823410] qcom,camera ac50000.qcom,cci:qcom,cam-sensor6: Linked as a consumer to regulator.54 [ 52.827517] qcom,camera ac50000.qcom,cci:qcom,cam-sensor6: Linked as a consumer to regulator.57 [ 52.831251] qcom,camera ac50000.qcom,cci:qcom,cam-sensor6: Linked as a consumer to regulator.77 [ 52.856350] ip (1386) used greatest stack depth: 9848 bytes left [ 52.870259] CAM_ERR: CAM-CCI: cam_cci_irq: 238 Base:ffffff80197f5000, M0_Q1 NACK ERROR: 0x10000000 [ 52.870825] CAM_ERR: CAM-CCI: cam_cci_read: 1306 ERROR with Slave 0x34: [ 52.870855] CAM_ERR: CAM-CCI: cam_cci_read_bytes: 1561 failed to read rc:-22 [ 52.870876] CAM_ERR: CAM-SENSOR: cam_cci_i2c_read: 35 rc = -22 [ 52.870896] CAM_WARN: CAM-SENSOR: cam_sensor_match_id: 769 read id: 0x0 expected id 0x481: [ 52.873132] qcom,camera ac50000.qcom,cci:qcom,cam-sensor6: Dropping the link to regulator.77 [ 52.875185] qcom,camera ac50000.qcom,cci:qcom,cam-sensor6: Dropping the link to regulator.57 [ 52.875784] qcom,camera ac50000.qcom,cci:qcom,cam-sensor6: Dropping the link to regulator.54 [ 52.876448] qcom,camera ac50000.qcom,cci:qcom,cam-sensor6: Dropping the link to regulator.56 [ 52.997628] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: no source widget found for MIC BIAS1 [ 53.009120] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: Failed to add route MIC BIAS1 -> direct -> AMIC1 [ 53.023257] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: no sink widget found for MIC BIAS1 [ 53.034624] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: Failed to add route Analog Mic1 -> direct -> MIC BIAS1 [ 53.049714] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: no source widget found for MIC BIAS2 [ 53.061156] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: Failed to add route MIC BIAS2 -> direct -> AMIC2 [ 53.074647] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: no sink widget found for MIC BIAS2 [ 53.085989] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: Failed to add route Analog Mic2 -> direct -> MIC BIAS2 [ 53.100594] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: no source widget found for MIC BIAS3 [ 53.112085] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: Failed to add route MIC BIAS3 -> direct -> AMIC3 [ 53.126067] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: no sink widget found for MIC BIAS3 [ 53.137335] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: Failed to add route Analog Mic3 -> direct -> MIC BIAS3 [ 53.152038] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: no source widget found for MIC BIAS3 [ 53.161978] binder: 1288:1288 ioctl 40046210 7fd1e3a1e4 returned -22 [ 53.163566] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: Failed to add route MIC BIAS3 -> direct -> AMIC4 [ 53.173607] binder: 1288:1288 ioctl 40046210 7fd1e3a204 returned -22 [ 53.177995] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: no sink widget found for MIC BIAS3 [ 53.189887] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: Failed to add route Analog Mic4 -> direct -> MIC BIAS3 [ 53.205323] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: no source widget found for MIC BIAS4 [ 53.217247] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: Failed to add route MIC BIAS4 -> direct -> AMIC5 [ 53.232047] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: no sink widget found for MIC BIAS4 [ 53.243585] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: Failed to add route Analog Mic5 -> direct -> MIC BIAS4 [ 53.258694] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: no source widget found for MIC BIAS3 [ 53.270200] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: Failed to add route MIC BIAS3 -> direct -> TX DMIC0 [ 53.284766] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: no sink widget found for MIC BIAS3 [ 53.296077] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: Failed to add route Digital Mic0 -> direct -> MIC BIAS3 [ 53.310916] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: no source widget found for MIC BIAS3 [ 53.322512] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: Failed to add route MIC BIAS3 -> direct -> TX DMIC1 [ 53.337414] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: no sink widget found for MIC BIAS3 [ 53.349236] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: Failed to add route Digital Mic1 -> direct -> MIC BIAS3 [ 53.364192] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: no source widget found for MIC BIAS1 [ 53.375757] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: Failed to add route MIC BIAS1 -> direct -> TX DMIC2 [ 53.390385] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: no sink widget found for MIC BIAS1 [ 53.401800] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: Failed to add route Digital Mic2 -> direct -> MIC BIAS1 [ 53.416636] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: no source widget found for MIC BIAS1 [ 53.428088] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: Failed to add route MIC BIAS1 -> direct -> TX DMIC3 [ 53.442265] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: no sink widget found for MIC BIAS1 [ 53.453829] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: Failed to add route Digital Mic3 -> direct -> MIC BIAS1 [ 53.464751] init: starting service 'qfp-daemon'... [ 53.468921] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: no source widget found for MIC BIAS4 [ 53.481013] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: Failed to add route MIC BIAS4 -> direct -> TX DMIC4 [ 53.486064] binder: 1482:1482 ioctl 40046210 7fd32526e4 returned -22 [ 53.495400] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: no sink widget found for MIC BIAS4 [ 53.506690] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: Failed to add route Digital Mic4 -> direct -> MIC BIAS4 [ 53.507004] binder: 1482:1482 ioctl 40046210 7fd3252514 returned -22 [ 53.518409] init: starting service 'qvrd_vndr'... [ 53.519368] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 53.521273] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: no source widget found for MIC BIAS4 [ 53.528688] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 53.533229] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: Failed to add route MIC BIAS4 -> direct -> TX DMIC5 [ 53.547576] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: no sink widget found for MIC BIAS4 [ 53.549235] init: starting service 'sxrd'... [ 53.558845] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: Failed to add route Digital Mic5 -> direct -> MIC BIAS4 [ 53.570195] cnss-daemon: NL group_id 10, cnss_nl.family_id 28 [ 53.570281] cnss-daemon: wlfw_start: Starting [ 53.573759] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: no sink widget found for IN1_HPHL [ 53.585444] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: Failed to add route HPHL_OUT -> direct -> IN1_HPHL [ 53.588241] init: starting service 'vendor.tlocd'... [ 53.599880] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: no sink widget found for IN2_HPHR [ 53.611169] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: Failed to add route HPHR_OUT -> direct -> IN2_HPHR [ 53.614613] init: starting service 'vendor-sensor-sh'... [ 53.625854] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: no sink widget found for IN3_AUX [ 53.636970] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: Failed to add route AUX_OUT -> direct -> IN3_AUX [ 53.650955] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: no source widget found for ADC1_OUTPUT [ 53.662733] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: Failed to add route ADC1_OUTPUT -> direct -> TX SWR_ADC0 [ 53.677263] binder: 1499:1499 ioctl 40046210 7fc9454df4 returned -22 [ 53.677894] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: no source widget found for ADC2_OUTPUT [ 53.686646] init: Command 'class_start late_start' action=nonencrypted (/system/etc/init/hw/init.rc:1119) took 622ms and succeeded [ 53.689737] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: Failed to add route ADC2_OUTPUT -> direct -> TX SWR_ADC1 [ 53.690460] init: Service 'vendor.light-hal-2-0' (pid 1435) exited with status 0 [ 53.704814] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: no source widget found for ADC3_OUTPUT [ 53.714209] cnss-daemon: no interop issues ap currently [ 53.716708] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: Failed to add route ADC3_OUTPUT -> direct -> TX SWR_ADC2 [ 53.727486] cnss-daemon: ro.baseband : [apq] [ 53.727536] cnss-daemon: Hardware supports external modem [ 53.729750] cnss-daemon: wlfw_service_request: Start the pthread: 0x0K [ 53.731730] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: no source widget found for ADC4_OUTPUT [ 53.731774] init: Sending signal 9 to service 'vendor.light-hal-2-0' (pid 1435) process group... [ 53.739985] cnss-daemon: pm_release_vote: pm_handle is NULL [ 53.740025] cnss-daemon: pm_release_vote: pm_handle is NULL [ 53.740302] cnss-daemon: wlfw_build_cal_table: not read /data/vendor/wifi/wlfw_cal_00.bin [ 53.743845] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: Failed to add route ADC4_OUTPUT -> direct -> TX SWR_ADC3 [ 53.758971] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: no source widget found for DMIC1_OUTPUT [ 53.771068] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: Failed to add route DMIC1_OUTPUT -> direct -> TX SWR_DMIC0 [ 53.772994] cnss-daemon: wlfw_build_cal_table: not read /data/vendor/wifi/wlfw_cal_02.bin [ 53.779823] cnss: Received QMI WLFW request memory indication [ 53.784511] cnss: FW requests for memory, size: 0x5e0000, type: 1 [ 53.784537] cnss: FW requests for memory, size: 0xd8000, type: 4 [ 53.784564] cnss: Posting event: REQUEST_MEM(2), state: 0x9 flags: 0x0 [ 53.784610] cnss: PM stay awake, state: 0x9, count: 1 [ 53.786779] cnss: Processing driver event: REQUEST_MEM(2), state: 0x9 [ 53.787329] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: no source widget found for DMIC2_OUTPUT [ 53.791389] binder: 1420:1420 ioctl 40046210 7fc8f41024 returned -22 [ 53.799175] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: Failed to add route DMIC2_OUTPUT -> direct -> TX SWR_DMIC1 [ 53.814707] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: no source widget found for DMIC3_OUTPUT [ 53.826596] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: Failed to add route DMIC3_OUTPUT -> direct -> TX SWR_DMIC2 [ 53.842568] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: no source widget found for DMIC4_OUTPUT [ 53.854461] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: Failed to add route DMIC4_OUTPUT -> direct -> TX SWR_DMIC3 [ 53.870333] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: no source widget found for DMIC5_OUTPUT [ 53.882178] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: Failed to add route DMIC5_OUTPUT -> direct -> TX SWR_DMIC4 [ 53.891639] qbt:qbt_open: entry minor_no=0 fd_available=1 [ 53.897431] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: no source widget found for DMIC6_OUTPUT [ 53.899079] binder: 1496:1496 ioctl 40046210 7fd9fe08d4 returned -22 [ 53.901684] IPv6: ADDRCONF(NETDEV_UP): vlan0: link is not ready [ 53.907672] ip (1580) used greatest stack depth: 9816 bytes left [ 53.909088] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: Failed to add route DMIC6_OUTPUT -> direct -> TX SWR_DMIC5 [ 53.922092] qbt:qbt_open: exit : 0 fd_available=0 [ 53.922398] qbt:qbt_open: entry minor_no=1 fd_available=0 [ 53.922404] qbt:qbt_open: exit : 0 fd_available=0 [ 53.922547] qbt:qbt_ioctl: cmd received 102 [ 53.924892] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: no source widget found for DMIC7_OUTPUT [ 53.925592] qbt:qbt_ioctl: qbt_ioctl: QBT_ENABLE_IPC [ 53.934412] binder: 1496:1496 ioctl 40046210 7fd9fe04d4 returned -22 [ 53.937150] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: Failed to add route DMIC7_OUTPUT -> direct -> TX SWR_DMIC6 [ 53.952257] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: no source widget found for DMIC8_OUTPUT [ 53.953658] ip (1583) used greatest stack depth: 9768 bytes left [ 53.965414] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: Failed to add route DMIC8_OUTPUT -> direct -> TX SWR_DMIC7 [ 53.965884] qbt:qbt_ioctl: cmd received 107 [ 53.979835] qbt:qbt_ioctl: Acquiring wakelock [ 53.983240] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: no sink widget found for SpkrLeft IN [ 53.994673] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: Failed to add route WSA_SPK1 OUT -> direct -> SpkrLeft IN [ 54.009936] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: no sink widget found for SpkrRight IN [ 54.021643] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: Failed to add route WSA_SPK2 OUT -> direct -> SpkrRight IN [ 54.037315] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: no sink widget found for VA MIC BIAS3 [ 54.049336] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: Failed to add route Digital Mic0 -> direct -> VA MIC BIAS3 [ 54.058972] read descriptors [ 54.065048] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: no sink widget found for VA MIC BIAS3 [ 54.068425] read strings [ 54.077153] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: Failed to add route Digital Mic1 -> direct -> VA MIC BIAS3 [ 54.092211] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: no sink widget found for VA MIC BIAS4 [ 54.103931] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: Failed to add route Digital Mic4 -> direct -> VA MIC BIAS4 [ 54.119290] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: no sink widget found for VA MIC BIAS4 [ 54.130905] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: Failed to add route Digital Mic5 -> direct -> VA MIC BIAS4 [ 54.145636] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: no source widget found for VA MIC BIAS3 [ 54.157523] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: Failed to add route VA MIC BIAS3 -> direct -> VA DMIC0 [ 54.171922] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: no source widget found for VA MIC BIAS3 [ 54.183725] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: Failed to add route VA MIC BIAS3 -> direct -> VA DMIC1 [ 54.198099] android_work: did not send uevent (0 0 0000000000000000) [ 54.198923] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: no source widget found for VA MIC BIAS4 [ 54.210784] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: Failed to add route VA MIC BIAS4 -> direct -> VA DMIC4 [ 54.225697] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: no source widget found for VA MIC BIAS4 [ 54.237370] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: Failed to add route VA MIC BIAS4 -> direct -> VA DMIC5 [ 54.253410] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: no source widget found for ADC1_OUTPUT [ 54.265105] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: Failed to add route ADC1_OUTPUT -> direct -> VA SWR_ADC0 [ 54.279864] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: no source widget found for ADC2_OUTPUT [ 54.290974] capability: warning: `msm_irqbalance' uses 32-bit capabilities (legacy support in use) [ 54.291738] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: Failed to add route ADC2_OUTPUT -> direct -> VA SWR_ADC1 [ 54.292065] msm-dwc3 a600000.ssusb: Could not get usb psy [ 54.306401] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: no source widget found for ADC3_OUTPUT [ 54.321946] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: Failed to add route ADC3_OUTPUT -> direct -> VA SWR_ADC2 [ 54.336892] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: no source widget found for ADC4_OUTPUT [ 54.348975] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: Failed to add route ADC4_OUTPUT -> direct -> VA SWR_ADC3 [ 54.363673] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: no source widget found for DMIC1_OUTPUT [ 54.375509] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: Failed to add route DMIC1_OUTPUT -> direct -> VA SWR_MIC0 [ 54.385574] msm-dwc3 a600000.ssusb: Could not get usb psy [ 54.390401] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: no source widget found for DMIC2_OUTPUT [ 54.405618] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: Failed to add route DMIC2_OUTPUT -> direct -> VA SWR_MIC1 [ 54.420830] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: no source widget found for DMIC3_OUTPUT [ 54.433133] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: Failed to add route DMIC3_OUTPUT -> direct -> VA SWR_MIC2 [ 54.439889] android_work: sent uevent USB_STATE=CONNECTED [ 54.448667] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: no source widget found for DMIC4_OUTPUT [ 54.460663] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: Failed to add route DMIC4_OUTPUT -> direct -> VA SWR_MIC3 [ 54.475040] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: no source widget found for DMIC5_OUTPUT [ 54.475990] configfs-gadget gadget: high-speed config #1: b [ 54.487073] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: Failed to add route DMIC5_OUTPUT -> direct -> VA SWR_MIC4 [ 54.491371] msm-dwc3 a600000.ssusb: Could not get usb psy [ 54.501808] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: no source widget found for DMIC6_OUTPUT [ 54.501826] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: Failed to add route DMIC6_OUTPUT -> direct -> VA SWR_MIC5 [ 54.502273] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: no source widget found for DMIC7_OUTPUT [ 54.514123] android_work: sent uevent USB_STATE=CONFIGURED [ 54.519209] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: Failed to add route DMIC7_OUTPUT -> direct -> VA SWR_MIC6 [ 54.540592] ipa_mpm ipa_mpm_vote_unvote_pcie_clk:1530 MHI not initialized yet [ 54.545332] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: no source widget found for DMIC8_OUTPUT [ 54.572379] ipa_mpm ipa_mpm_start_stop_remote_mhip_chan:1644 MHI not initialized yet, probe in progress [ 54.574973] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: Failed to add route DMIC8_OUTPUT -> direct -> VA SWR_MIC7 [ 54.576438] i2c_geni 980000.i2c: i2c error :-107 [ 54.576461] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x00 [ 54.576665] i2c_geni 980000.i2c: i2c error :-107 [ 54.576675] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 54.600141] ipa_mpm ipa_mpm_start_stop_mhip_chan:1736 MHIP probe 1 not initialized [ 54.602854] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: ASoC: no DMI vendor name! [ 54.611590] ipa ipa3_cfg_ep_ctrl:4812 pipe setting delay is not supported [ 54.624244] ipa_usb_notify_cb: Set net_ready_trigger [ 54.627591] ipa_mpm ipa_mpm_vote_unvote_pcie_clk:1530 MHI not initialized yet [ 54.660836] ipa_mpm ipa_mpm_start_stop_remote_mhip_chan:1644 MHI not initialized yet, probe in progress [ 54.672637] ipa_usb_notify_cb: Set net_ready_trigger [ 54.695506] IPv6: ADDRCONF(NETDEV_UP): vlan1: link is not ready [ 54.801867] ip (1638) used greatest stack depth: 9760 bytes left [ 54.909219] MAIN_MGR: hvdcp_opti Version: 3:0:0 [ 54.930383] MAIN_MGR: set keepcaps failed! [ 54.931672] CHG_POLICY_PATH: Failed to get IIO path for MAIN_PSY [ 54.933610] type=1400 audit(11206.107:83): avc: denied { read } for comm="hvdcp_opti" name="devices" dev="sysfs" ino=52698 scontext=u:r:vendor_hvdcp:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=0 [ 55.167706] diag: In diag_ioctl_set_buffering_mode, invalid peripheral = -22 [ 55.169888] kona-asoc-snd soc:qcom,msm-audio-apr:qcom,q6core-audio:sound: msm_asoc_machine_probe: Sound card kona-mtp-snd-card registered [ 55.215665] [drm:dp_display_init_aux_switch][msm-dp-err][100 ]failed to register notifier (-22) [ 55.259681] swr-wcd rx_swr_ctrl: swrm_get_logical_dev_num: device 0xd01170224 is not ready [ 55.269961] swr_get_logical_dev_num: Error -22 to get logical addr for device d01170224 [ 55.279239] swr-wcd rx_swr_ctrl: swrm_get_logical_dev_num: device 0xd01170224 is not ready [ 55.288600] swr_get_logical_dev_num: Error -22 to get logical addr for device d01170224 [ 55.292035] healthd: No battery devices found [ 55.292089] type=1400 audit(11206.467:84): avc: denied { read } for comm="android.hardwar" name="type" dev="sysfs" ino=74124 scontext=u:r:hal_health_default:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=0 [ 55.299250] swr-wcd rx_swr_ctrl: swrm_get_logical_dev_num: device 0xd01170224 is not ready [ 55.308926] swr_get_logical_dev_num: Error -22 to get logical addr for device d01170224 [ 55.316070] healthd: battery none chg= [ 55.317920] swr-wcd wsa_swr_ctrl: swrm_runtime_suspend: clk stop mode not supported or SSR entry [ 55.323698] binder: 1321:1321 ioctl 40046210 7fdac10a94 returned -22 [ 55.328772] swr-wcd rx_swr_ctrl: swrm_get_logical_dev_num: device 0xd01170224 is not ready [ 55.338917] swr_get_logical_dev_num: Error -22 to get logical addr for device d01170224 [ 55.350874] IPv6: ADDRCONF(NETDEV_UP): vlan2: link is not ready [ 55.354687] swr-wcd rx_swr_ctrl: swrm_get_logical_dev_num: device 0xd01170224 is not ready [ 55.363928] swr_get_logical_dev_num: Error -22 to get logical addr for device d01170224 [ 55.372912] wcd938x_codec wcd938x-codec: wcd938x_bind: Slave bind failed, ret = -517 [ 55.414274] QSEECOM: qseecom_load_app: App (featenabler) does'nt exist, loading apps for first time [ 55.430364] cnss: Sending respond memory message, state: 0x9 [ 55.430396] cnss: Memory for FW, va: 0xffffff802652d000, pa: 0x00000000a1000000, size: 0x5e0000, type: 1 [ 55.430405] cnss: Memory for FW, va: 0xffffff80220fd000, pa: 0x00000000a1600000, size: 0xd8000, type: 4 [ 55.437102] cnss: PM relax, state: 0x9, count: 0 [ 55.439849] QSEECOM: qseecom_load_app: App with id 5 (featenabler) now loaded [ 55.446585] cnss: Received QMI WLFW FW memory ready indication [ 55.446600] cnss: Posting event: FW_MEM_READY(3), state: 0x9 flags: 0x0 [ 55.446614] cnss: PM stay awake, state: 0x9, count: 1 [ 55.447836] cnss: PM relax, state: 0x9, count: 0 [ 55.447849] cnss: PM stay awake, state: 0x9, count: 1 [ 55.447866] cnss: Processing driver event: FW_MEM_READY(3), state: 0x9 [ 55.447876] cnss: Sending target capability message, state: 0xb [ 55.462070] cnss: Voltage for CPR: 948mV [ 55.462089] cnss: Got voltage 800mV from i: 0, j: 0 [ 55.462133] cnss: Got voltage 1012mV from i: 4, j: 1 [ 55.462171] cnss: Update TCS CMD data address 0x000000000b2e5844 with voltage 950mV [ 55.462181] cnss: Device frequency is 24000000 HZ [ 55.462191] cnss: Target capability: chip_id: 0x0, chip_family: 0xb, board_id: 0xff, soc_id: 0xffffffff, fw_version: 0x101a0521, fw_build_timestamp: 2021-12-20 07:54, fw_build_id: QC_IMAGE_VERSION_STRING=WLAN.HST.1.0.1.r1-01313-QCAHSTSWPL_SILICONZ-1, otp_version: 0x0 [ 55.462209] cnss: Sending BDF download message, state: 0xb, type: 4 [ 55.462231] cnss: FW name added with prefix: qca6390/regdb.bin [ 55.462640] cnss2 b0000000.qcom,cnss-qca6390: Falling back to syfs fallback for: qca6390/regdb.bin [ 55.486760] ueventd: firmware: loading 'qca6390/regdb.bin' for '/devices/platform/soc/b0000000.qcom,cnss-qca6390/firmware/qca6390!regdb.bin' [ 55.488801] ueventd: firmware: could not find firmware for qca6390/regdb.bin [ 55.488916] subsys-pil-tz soc:qcom,kgsl-hyp: Falling back to syfs fallback for: a650_zap.mdt [ 55.496601] ueventd: firmware: attempted /etc/firmware/qca6390/regdb.bin, open failed: No such file or directory [ 55.507164] ueventd: firmware: attempted /odm/firmware/qca6390/regdb.bin, open failed: No such file or directory [ 55.521135] ueventd: firmware: loading 'a650_zap.mdt' for '/devices/platform/soc/soc:qcom,kgsl-hyp/firmware/a650_zap.mdt' [ 55.522694] ueventd: firmware: attempted /vendor/firmware/qca6390/regdb.bin, open failed: No such file or directory [ 55.533647] ueventd: firmware: attempted /firmware/image/qca6390/regdb.bin, open failed: No such file or directory [ 55.538085] ueventd: loading /devices/platform/soc/soc:qcom,kgsl-hyp/firmware/a650_zap.mdt took 17ms [ 55.549340] ueventd: firmware: attempted /vendor/firmware_mnt/image/qca6390/regdb.bin, open failed: No such file or directory [ 55.562720] ueventd: loading /devices/platform/soc/b0000000.qcom,cnss-qca6390/firmware/qca6390!regdb.bin took 80ms [ 55.566474] subsys-pil-tz soc:qcom,kgsl-hyp: a650_zap: loading from 0x00000000fcf00000 to 0x00000000fcf01000 [ 55.574445] cnss: Failed to load BDF: qca6390/regdb.bin [ 55.579766] subsys-pil-tz soc:qcom,kgsl-hyp: Falling back to syfs fallback for: a650_zap.b02 [ 55.580732] cnss: Sending BDF download message, state: 0xb, type: 1 [ 55.580786] cnss: FW name added with prefix: qca6390/bdwlan.elf [ 55.581160] cnss2 b0000000.qcom,cnss-qca6390: Falling back to syfs fallback for: qca6390/bdwlan.elf [ 55.607374] subsys-pil-tz soc:qcom,kgsl-hyp: a650_zap: Brought out of reset [ 55.609401] QSEECOM: qseecom_load_app: App (fingerpr) does'nt exist, loading apps for first time [ 55.624710] cnss: Downloading BDF: qca6390/bdwlan.elf, size: 57908 [ 55.659955] cnss: FW name added with prefix: qca6390/m3.bin [ 55.660110] cnss_pci 0000:01:00.0: Falling back to syfs fallback for: qca6390/m3.bin [ 55.661657] binder: 1139:1164 ioctl 40046210 6fe3405144 returned -22 [ 55.687760] cnss: Sending M3 information message, state: 0xb [ 55.687794] cnss: M3 memory, va: 0xffffff8022268000, pa: 0x00000000a1800000, size: 0x411bc [ 55.693133] cnss: PM relax, state: 0xb, count: 0 [ 55.693577] cnss: Received QMI WLFW FW initialization done indication [ 55.693589] cnss: Posting event: FW_READY(4), state: 0xb flags: 0x0 [ 55.693605] cnss: PM stay awake, state: 0xb, count: 1 [ 55.694593] cnss: PM relax, state: 0xb, count: 0 [ 55.694620] cnss: PM stay awake, state: 0xb, count: 1 [ 55.694632] cnss: Processing driver event: FW_READY(4), state: 0xb [ 55.694643] cnss: PCIE Gen speed not setup [ 55.694652] cnss: Sending antenna switch sync request, state: 0xf [ 55.697282] cnss: Antenna switch request failed, result: 1, err: 94 [ 55.709095] cnss: Sending mode message, mode: CALIBRATION(7), state: 0xf [ 55.730538] QSEECOM: qseecom_load_app: App with id 6 (fingerpr) now loaded [ 55.877155] cnss: Received QMI WLFW pin connect result indication [ 55.877159] cnss: Removing vote for Regulator vdd-wlan-rfa2 [ 55.877170] cnss: Pin connect Result: pwr_pin: 0x1 phy_io_pin: 0x0 rf_io_pin: 0x0 [ 55.877268] cnss: Removing vote for Regulator vdd-wlan-rfa1 [ 55.877315] cnss: Removing vote for Regulator vdd-wlan-dig [ 55.877366] qcom_rpmh DRV:apps_rsc TCS Busy, retrying RPMH message send: addr=0x43200 [ 55.877444] cnss: Removing vote for Regulator vdd-wlan-aon [ 55.877481] cnss: Removing vote for Regulator vdd-wlan-io [ 55.877501] cnss: PM relax, state: 0xf, count: 0 [ 55.923983] QSEECOM: __qseecom_unload_app: App (6) is unloaded [ 55.926258] qbt:qbt_release: entry minor_no=0 fd_available=0 [ 55.926268] qbt:qbt_release: Releasing wakelock [ 55.926279] qbt:qbt_release: exit : fd_available=1 [ 55.926300] qbt:qbt_release: entry minor_no=1 fd_available=1 [ 55.926307] qbt:qbt_release: exit : fd_available=1 [ 56.291434] IPv6: ADDRCONF(NETDEV_UP): vlan4: link is not ready [ 56.299229] ip (1706) used greatest stack depth: 9592 bytes left [ 56.457192] healthd: battery none chg= [ 56.585313] i2c_geni 980000.i2c: i2c error :-107 [ 56.595481] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x00 [ 56.620525] i2c_geni 980000.i2c: i2c error :-107 [ 56.632407] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 56.838531] msm_qti_pp_get_rms_value_control, back not active to query rms be_idx:3 [ 56.886306] core_get_license_status: cmdrsp_license_result.result = 0x15 for module 0x131ff [ 56.888690] msm_ext_disp_update_audio_ops: Display not found (EXT_DISPLAY_TYPE_DP) ctld (0) stream (0) [ 56.899000] msm_ext_disp_update_audio_ops: Display not found (EXT_DISPLAY_TYPE_HDMI) ctld (0) stream (0) [ 56.909232] msm_ext_disp_update_audio_ops: Display not found (EXT_DISPLAY_TYPE_DP) ctld (0) stream (0) [ 56.919353] msm_ext_disp_update_audio_ops: Display not found (EXT_DISPLAY_TYPE_DP) ctld (0) stream (0) [ 56.931359] msm_ext_disp_update_audio_ops: Display not found (EXT_DISPLAY_TYPE_DP) ctld (0) stream (0) [ 56.942783] msm-ext-disp-audio-codec-rx soc:qcom,msm-ext-disp:qcom,msm-ext-disp-audio-codec-rx: msm_ext_disp_audio_type_get: get_audio_edid_blk() or get_intf_id is NULL [ 56.959797] msm_ext_disp_update_audio_ops: Display not found (EXT_DISPLAY_TYPE_DP) ctld (0) stream (0) [ 56.969640] msm-ext-disp-audio-codec-rx soc:qcom,msm-ext-disp:qcom,msm-ext-disp-audio-codec-rx: msm_ext_disp_audio_type_get: get_audio_edid_blk() or get_intf_id is NULL [ 56.986224] msm_ext_disp_update_audio_ops: Display not found (EXT_DISPLAY_TYPE_DP) ctld (0) stream (0) [ 56.996000] msm-ext-disp-audio-codec-rx soc:qcom,msm-ext-disp:qcom,msm-ext-disp-audio-codec-rx: msm_ext_disp_audio_type_get: get_audio_edid_blk() or get_intf_id is NULL [ 57.015617] msm-ext-disp-audio-codec-rx soc:qcom,msm-ext-disp:qcom,msm-ext-disp-audio-codec-rx: msm_ext_disp_audio_device_get: invalid dai id: 4 [ 57.147436] IPv6: ADDRCONF(NETDEV_UP): vlan8: link is not ready [ 57.183265] msm_pcm_volume_ctl_get substream not found [ 57.299849] msm_qti_pp_get_rms_value_control, back not active to query rms be_idx:3 [ 57.342069] core_get_license_status: cmdrsp_license_result.result = 0x15 for module 0x131ff [ 57.343292] msm_ext_disp_update_audio_ops: Display not found (EXT_DISPLAY_TYPE_DP) ctld (0) stream (0) [ 57.360435] msm_ext_disp_update_audio_ops: Display not found (EXT_DISPLAY_TYPE_HDMI) ctld (0) stream (0) [ 57.380430] msm_ext_disp_update_audio_ops: Display not found (EXT_DISPLAY_TYPE_DP) ctld (0) stream (0) [ 57.400496] msm_ext_disp_update_audio_ops: Display not found (EXT_DISPLAY_TYPE_DP) ctld (0) stream (0) [ 57.410750] msm_ext_disp_update_audio_ops: Display not found (EXT_DISPLAY_TYPE_DP) ctld (0) stream (0) [ 57.420500] msm-ext-disp-audio-codec-rx soc:qcom,msm-ext-disp:qcom,msm-ext-disp-audio-codec-rx: msm_ext_disp_audio_type_get: get_audio_edid_blk() or get_intf_id is NULL [ 57.438445] msm_ext_disp_update_audio_ops: Display not found (EXT_DISPLAY_TYPE_DP) ctld (0) stream (0) [ 57.448608] msm-ext-disp-audio-codec-rx soc:qcom,msm-ext-disp:qcom,msm-ext-disp-audio-codec-rx: msm_ext_disp_audio_type_get: get_audio_edid_blk() or get_intf_id is NULL [ 57.465259] msm_ext_disp_update_audio_ops: Display not found (EXT_DISPLAY_TYPE_DP) ctld (0) stream (0) [ 57.475375] msm-ext-disp-audio-codec-rx soc:qcom,msm-ext-disp:qcom,msm-ext-disp-audio-codec-rx: msm_ext_disp_audio_type_get: get_audio_edid_blk() or get_intf_id is NULL [ 57.493506] msm-ext-disp-audio-codec-rx soc:qcom,msm-ext-disp:qcom,msm-ext-disp-audio-codec-rx: msm_ext_disp_audio_device_get: invalid dai id: 4 [ 57.558817] mv2112_read_status: autoneg not complete [ 57.558827] mv2112_disable_aneg [ 57.559409] mv2112_setup_forced [ 57.560107] lan743x 0001:01:00.0 eth0: Link is Down [ 57.610053] msm_pcm_volume_ctl_get substream not found [ 57.946426] [MAX975X:max96755x_drm_notifier_callback] *ERROR* receives EARLY_BLANK:UNBLANK [ 57.955961] [drm:dsi_display_set_mode] [msm-dsi-info]: mdp_transfer_time_us=0 us [ 57.956009] [drm:dsi_display_set_mode] [msm-dsi-info]: hactive= 2380,vactive= 1020,fps=60 [ 57.959094] [drm:dsi_ctrl_isr_configure] [msm-dsi-info]: dsi-ctrl-0: IRQ 463 registered [ 58.044506] [MAX975X:max96755x_drm_notifier_callback] *ERROR* receives BLANK:UNBLANK [ 58.061192] i2c_geni 980000.i2c: i2c error :-107 [ 58.066582] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 58.078109] i2c_geni 980000.i2c: i2c error :-107 [ 58.083016] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 58.219092] IPv6: ADDRCONF(NETDEV_UP): vlan11: link is not ready [ 58.272400] type=1400 audit(1661508196.379:85): avc: denied { read } for comm="ip" name="rt_tables" dev="dm-10" ino=350 scontext=u:r:ethernet:s0 tcontext=u:object_r:net_data_file:s0 tclass=file permissive=0 [ 58.285887] type=1400 audit(1661508196.383:86): avc: denied { write } for comm="sh" name="ip_forward" dev="proc" ino=31629 scontext=u:r:ethernet:s0 tcontext=u:object_r:proc_net:s0 tclass=file permissive=0 [ 58.286430] type=1400 audit(1661508196.383:87): avc: denied { write } for comm="sh" name="ip_default_ttl" dev="proc" ino=53792 scontext=u:r:ethernet:s0 tcontext=u:object_r:proc_net:s0 tclass=file permissive=0 [ 58.288549] type=1400 audit(1661508196.387:88): avc: denied { write } for comm="sh" name="tcp_keepalive_probes" dev="proc" ino=53793 scontext=u:r:ethernet:s0 tcontext=u:object_r:proc_net:s0 tclass=file permissive=0 [ 58.297458] type=1400 audit(1661508196.387:89): avc: denied { write } for comm="sh" name="tcp_keepalive_intvl" dev="proc" ino=53794 scontext=u:r:ethernet:s0 tcontext=u:object_r:proc_net:s0 tclass=file permissive=0 [ 58.297827] type=1400 audit(1661508196.387:90): avc: denied { write } for comm="sh" name="tcp_keepalive_time" dev="proc" ino=53795 scontext=u:r:ethernet:s0 tcontext=u:object_r:proc_net:s0 tclass=file permissive=0 [ 58.298161] type=1400 audit(1661508196.387:91): avc: denied { write } for comm="sh" name="tcp_rmem" dev="proc" ino=53796 scontext=u:r:ethernet:s0 tcontext=u:object_r:proc_net:s0 tclass=file permissive=0 [ 58.298705] type=1400 audit(1661508196.387:92): avc: denied { write } for comm="sh" name="tcp_wmem" dev="proc" ino=53797 scontext=u:r:ethernet:s0 tcontext=u:object_r:proc_net:s0 tclass=file permissive=0 [ 58.542840] init: starting service 'qvrd_vndr'... [ 58.543842] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 58.544736] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 58.571567] mv2112_read_status [ 58.571822] mv2112_update_link: 3.0x901(1G): 0x80 [ 58.572068] mv2112_update_link: 3.0x8109(100M): 0x0 [ 58.572088] mv2112_update_link: link 0x0 [ 58.572107] mv2112_read_status: autoneg is disabled [ 58.578875] init: starting service 'sxrd'... [ 58.595210] init: Service 'qvrd_vndr' (pid 1826) exited with status 1 [ 58.595247] init: Sending signal 9 to service 'qvrd_vndr' (pid 1826) process group... [ 58.595507] libprocessgroup: Successfully killed process cgroup uid 1000 pid 1826 in 0ms [ 58.602596] init: Service 'sxrd' (pid 1829) exited with status 1 [ 58.602622] init: Sending signal 9 to service 'sxrd' (pid 1829) process group... [ 58.602816] libprocessgroup: Successfully killed process cgroup uid 1000 pid 1829 in 0ms [ 59.188621] cnss-daemon: wlfw_qmi_ind_cb: Receive Ind : 0x2a [ 59.229190] acc_open [ 59.229228] acc_release [ 59.544022] cnss: Received QMI WLFW pin connect result indication [ 59.544035] cnss: Pin connect Result: pwr_pin: 0x0 phy_io_pin: 0x0 rf_io_pin: 0x2b [ 59.544770] cnss: Received QMI WLFW calibration done indication [ 59.544790] cnss: Posting event: COLD_BOOT_CAL_DONE(6), state: 0xf flags: 0x0 [ 59.544802] cnss: PM stay awake, state: 0xf, count: 1 [ 59.545123] cnss: PM relax, state: 0xf, count: 0 [ 59.545202] cnss: PM stay awake, state: 0xf, count: 1 [ 59.545217] cnss: Processing driver event: COLD_BOOT_CAL_DONE(6), state: 0xf [ 59.545225] cnss: Calibration completed successfully [ 59.545232] cnss: Sending mode message, mode: OFF(4), state: 0xf [ 59.545602] cnss-daemon: wlfw_qmi_ind_cb: Receive Ind : 0x21 [ 59.550605] cnss: Received QMI WLFW FW ready indication [ 59.550665] cnss: Posting event: COLD_BOOT_CAL_DONE(6), state: 0xf flags: 0x0 [ 59.551163] cnss: Skip driver remove [ 59.551190] cnss: WLFW server exiting [ 59.551215] cnss: Posting event: SERVER_EXIT(1), state: 0x2000f flags: 0x0 [ 59.551333] cnss: Read register offset 0x1f8031c, val = 0x2 [ 59.551348] cnss: Write val 0x3 to register offset 0x1f8031c [ 59.553803] cnss: Setting MHI state: POWER_OFF(4) [ 59.553942] cnss-daemon: wlfw_qmi_err_cb: Server disconnect, err -2 client 0x2K [ 59.592464] mv2112_read_status [ 59.592705] mv2112_update_link: 3.0x901(1G): 0x80 [ 59.592936] mv2112_update_link: 3.0x8109(100M): 0x0 [ 59.592952] mv2112_update_link: link 0x0 [ 59.592969] mv2112_read_status: autoneg is disabled [ 59.612492] cnss: Suspending PCI link [ 59.613212] msm_pcie_disable: PCIe: Assert the reset of endpoint of RC0. [ 59.614089] cnss: Setting MHI state: DEINIT(1) [ 59.614214] cnss: De-assert WLAN_EN GPIO successfully [ 59.614222] cnss: Regulator vdd-wlan-rfa2 is being disabled [ 59.614262] cnss: Regulator vdd-wlan-rfa1 is being disabled [ 59.614290] cnss: Regulator vdd-wlan-dig is being disabled [ 59.614316] cnss: Regulator vdd-wlan-aon is being disabled [ 59.614342] cnss: Regulator wlan-ant-switch is being disabled [ 59.614367] cnss: Regulator vdd-wlan-io is being disabled [ 59.628588] Wifi Turning On from UI [ 59.670183] cnss: Processing driver event: COLD_BOOT_CAL_DONE(6), state: 0x20001 [ 59.670205] cnss: Processing driver event: SERVER_EXIT(1), state: 0x20001 [ 59.670214] cnss: QMI WLFW service disconnected, state: 0x20000 [ 59.675243] cnss: Posting event: REGISTER_DRIVER(7)-sync, state: 0x20000 flags: 0x5 [ 59.676147] cnss: Processing driver event: REGISTER_DRIVER-sync(7), state: 0x0 [ 59.676162] cnss: Regulator vdd-wlan-io is being enabled [ 59.676173] cnss: Regulator wlan-ant-switch is being enabled [ 59.679993] cnss: Regulator vdd-wlan-aon is being enabled [ 59.684334] cnss: Regulator vdd-wlan-dig is being enabled [ 59.686446] cnss: Regulator vdd-wlan-rfa1 is being enabled [ 59.686858] cnss: Regulator vdd-wlan-rfa2 is being enabled [ 59.687201] cnss: BT_EN_GPIO State: Off. Delay WLAN_GPIO enable [ 59.772176] cnss-daemon: DMS thread joined succesfully [ 59.772447] cnss-daemon: wlfw_stop: Stop done: 0 [ 59.772506] cnss-daemon: wlfw_start: Starting [ 59.773437] cnss-daemon: wlfw_service_request: Start the pthread: 0x0K [ 59.788501] cnss-daemon: ro.baseband : [apq] [ 59.788614] cnss-daemon: Hardware supports external modem [ 59.789475] cnss: Assert WLAN_EN GPIO successfully [ 59.789505] cnss: Resuming PCI link [ 59.789669] msm_pcie_enable: PCIe: Assert the reset of endpoint of RC0. [ 59.798729] msm_pcie_enable: PCIe: RC0: PCIE20_PARF_INT_ALL_MASK: 0x7f80d202 [ 59.800765] pcie_phy_init: PCIe RC0 PHY is ready! [ 59.810897] msm_pcie_enable: PCIe: Release the reset of endpoint of RC0. [ 59.829238] msm_pcie_link_train: PCIe RC0 link initialized [ 59.844373] cnss_pci 0000:01:00.0: enabling device (0000 -> 0002) [ 59.845016] cnss: Config PCIe remap window register to 0x4000003f [ 59.845168] cnss: Read register offset 0x1f8031c, val = 0x6 [ 59.845188] cnss: Write val 0x2 to register offset 0x1f8031c [ 59.845199] cnss: Setting MHI state: INIT(0) [ 59.845849] cnss: Setting MHI state: POWER_ON(2) [ 59.846653] cnss_pci 0000:01:00.0: Falling back to syfs fallback for: qca6390/amss20.bin [ 60.091721] binder: 1928:1928 ioctl 40046210 7fc826c6b4 returned -22 [ 60.093975] logd: Skipping entries from slow reader, pid 1262, fd 14, from LogBuffer::Prune() [ 60.094119] logd: Skipping entries from slow reader, pid 1262, fd 14, from LogBuffer::Prune() [ 60.106670] i2c_geni 980000.i2c: i2c error :-107 [ 60.120855] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 60.134629] i2c_geni 980000.i2c: i2c error :-107 [ 60.140711] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 60.267610] binder: 1954:1954 ioctl 40046210 7fc826c6b4 returned -22 [ 60.283866] cnss: MHI status cb is called with reason MISSION_MODE(6) [ 60.286483] cnss: Completed event: REGISTER_DRIVER(7), state: 0x10, ret: 0/0 [ 60.286527] cnss: PM relax, state: 0x10, count: 0 [ 60.312706] [drm:dp_display_init_aux_switch][msm-dp-err][117 ]failed to register notifier (-22) [ 60.378290] swr-wcd rx_swr_ctrl: swrm_get_logical_dev_num: device 0xd01170224 is not ready [ 60.387152] swr_get_logical_dev_num: Error -22 to get logical addr for device d01170224 [ 60.396145] swr-wcd rx_swr_ctrl: swrm_get_logical_dev_num: device 0xd01170224 is not ready [ 60.405107] swr_get_logical_dev_num: Error -22 to get logical addr for device d01170224 [ 60.415690] swr-wcd rx_swr_ctrl: swrm_get_logical_dev_num: device 0xd01170224 is not ready [ 60.424631] swr_get_logical_dev_num: Error -22 to get logical addr for device d01170224 [ 60.434296] swr-wcd rx_swr_ctrl: swrm_get_logical_dev_num: device 0xd01170224 is not ready [ 60.443472] swr_get_logical_dev_num: Error -22 to get logical addr for device d01170224 [ 60.452451] swr-wcd rx_swr_ctrl: swrm_get_logical_dev_num: device 0xd01170224 is not ready [ 60.461906] swr_get_logical_dev_num: Error -22 to get logical addr for device d01170224 [ 60.470722] wcd938x_codec wcd938x-codec: wcd938x_bind: Slave bind failed, ret = -517 [ 60.475172] binder: 1997:1997 ioctl 40046210 ffa3bca8 returned -22 [ 60.493578] cnss: WLFW server arriving: node 7 port 1 [ 60.493631] cnss: Posting event: SERVER_ARRIVE(0), state: 0x10 flags: 0x0 [ 60.493665] cnss: PM stay awake, state: 0x10, count: 1 [ 60.493811] cnss: PM relax, state: 0x10, count: 0 [ 60.493832] cnss: PM stay awake, state: 0x10, count: 1 [ 60.493873] cnss: Processing driver event: SERVER_ARRIVE(0), state: 0x10 [ 60.493908] cnss: QMI WLFW service connected, state: 0x11 [ 60.493942] cnss: Sending indication register message, state: 0x11 [ 60.497567] [drm:dp_display_init_aux_switch][msm-dp-err][117 ]failed to register notifier (-22) [ 60.502772] cnss: Sending host capability message, state: 0x11 [ 60.508473] cnss: Number of clients is 2 [ 60.508504] cnss: Assign MSI to user: WAKE, num_vectors: 1, user_base_data: 813, base_vector: 13 [ 60.508531] cnss: WAKE MSI base data is 813 [ 60.508554] cnss: Calibration done is 1 [ 60.508579] cnss: Sending iova starting 0xa0000000 with size 0x10010000 [ 60.525040] cnss-daemon: pm_release_vote: pm_handle is NULL [ 60.527869] cnss: PM relax, state: 0x11, count: 0 [ 60.541425] swr-wcd rx_swr_ctrl: swrm_get_logical_dev_num: device 0xd01170224 is not ready [ 60.549014] cnss: Received QMI WLFW request memory indication [ 60.549947] cnss: FW requests for memory, size: 0x5e0000, type: 1 [ 60.549956] cnss: FW requests for memory, size: 0xd8000, type: 4 [ 60.549966] cnss: Posting event: REQUEST_MEM(2), state: 0x11 flags: 0x0 [ 60.549981] cnss: PM stay awake, state: 0x11, count: 1 [ 60.550000] cnss: PM relax, state: 0x11, count: 0 [ 60.550214] cnss: PM stay awake, state: 0x11, count: 1 [ 60.550229] cnss: Processing driver event: REQUEST_MEM(2), state: 0x11 [ 60.550239] cnss: Sending respond memory message, state: 0x11 [ 60.550266] cnss: Memory for FW, va: 0xffffff802652d000, pa: 0x00000000a1000000, size: 0x5e0000, type: 1 [ 60.550275] cnss: Memory for FW, va: 0xffffff80220fd000, pa: 0x00000000a1600000, size: 0xd8000, type: 4 [ 60.550382] swr_get_logical_dev_num: Error -22 to get logical addr for device d01170224 [ 60.560899] cnss: PM relax, state: 0x11, count: 0 [ 60.563429] cnss: Received QMI WLFW FW memory ready indication [ 60.563463] cnss: Posting event: FW_MEM_READY(3), state: 0x11 flags: 0x0 [ 60.563508] cnss: PM stay awake, state: 0x11, count: 1 [ 60.563564] cnss: PM relax, state: 0x11, count: 0 [ 60.563651] cnss: PM stay awake, state: 0x11, count: 1 [ 60.563688] cnss: Processing driver event: FW_MEM_READY(3), state: 0x11 [ 60.563719] cnss: Sending target capability message, state: 0x13 [ 60.564539] swr-wcd rx_swr_ctrl: swrm_get_logical_dev_num: device 0xd01170224 is not ready [ 60.573440] swr_get_logical_dev_num: Error -22 to get logical addr for device d01170224 [ 60.575441] cnss: Voltage for CPR: 948mV [ 60.582714] cnss: Update TCS CMD data address 0x000000000b2e5844 with voltage 950mV [ 60.582728] cnss: Device frequency is 24000000 HZ [ 60.582742] cnss: Target capability: chip_id: 0x0, chip_family: 0xb, board_id: 0xff, soc_id: 0xffffffff, fw_version: 0x101a0521, fw_build_timestamp: 2021-12-20 07:54, fw_build_id: QC_IMAGE_VERSION_STRING=WLAN.HST.1.0.1.r1-01313-QCAHSTSWPL_SILICONZ-1, otp_version: 0x0 [ 60.582768] cnss: Sending BDF download message, state: 0x13, type: 4 [ 60.582797] cnss: FW name added with prefix: qca6390/regdb.bin [ 60.582985] cnss2 b0000000.qcom,cnss-qca6390: Falling back to syfs fallback for: qca6390/regdb.bin [ 60.583188] swr-wcd rx_swr_ctrl: swrm_get_logical_dev_num: device 0xd01170224 is not ready [ 60.592794] swr_get_logical_dev_num: Error -22 to get logical addr for device d01170224 [ 60.592892] ueventd: firmware: loading 'qca6390/regdb.bin' for '/devices/platform/soc/b0000000.qcom,cnss-qca6390/firmware/qca6390!regdb.bin' [ 60.602658] swr-wcd rx_swr_ctrl: swrm_get_logical_dev_num: device 0xd01170224 is not ready [ 60.611959] swr_get_logical_dev_num: Error -22 to get logical addr for device d01170224 [ 60.614101] ueventd: firmware: could not find firmware for qca6390/regdb.bin [ 60.615166] binder: 2006:2006 ioctl 40046210 7fc826c6b4 returned -22 [ 60.616532] mv2112_read_status [ 60.616794] mv2112_update_link: 3.0x901(1G): 0x80 [ 60.617027] mv2112_update_link: 3.0x8109(100M): 0x0 [ 60.617042] mv2112_update_link: link 0x0 [ 60.617057] mv2112_read_status: autoneg is disabled [ 60.621742] swr-wcd rx_swr_ctrl: swrm_get_logical_dev_num: device 0xd01170224 is not ready [ 60.627616] ueventd: firmware: attempted /etc/firmware/qca6390/regdb.bin, open failed: No such file or directory [ 60.627631] ueventd: firmware: attempted /odm/firmware/qca6390/regdb.bin, open failed: No such file or directory [ 60.627649] ueventd: firmware: attempted /vendor/firmware/qca6390/regdb.bin, open failed: No such file or directory [ 60.627666] ueventd: firmware: attempted /firmware/image/qca6390/regdb.bin, open failed: No such file or directory [ 60.627699] ueventd: firmware: attempted /vendor/firmware_mnt/image/qca6390/regdb.bin, open failed: No such file or directory [ 60.629421] ueventd: loading /devices/platform/soc/b0000000.qcom,cnss-qca6390/firmware/qca6390!regdb.bin took 36ms [ 60.637054] swr_get_logical_dev_num: Error -22 to get logical addr for device d01170224 [ 60.647536] cnss: Failed to load BDF: qca6390/regdb.bin [ 60.647554] cnss: Sending BDF download message, state: 0x13, type: 1 [ 60.647568] cnss: FW name added with prefix: qca6390/bdwlan.elf [ 60.647663] cnss2 b0000000.qcom,cnss-qca6390: Falling back to syfs fallback for: qca6390/bdwlan.elf [ 60.655710] binder: 2028:2028 ioctl 40046210 7fc826c6b4 returned -22 [ 60.659235] wcd938x_codec wcd938x-codec: wcd938x_bind: Slave bind failed, ret = -517 [ 60.708603] ueventd: firmware: loading 'qca6390/bdwlan.elf' for '/devices/platform/soc/b0000000.qcom,cnss-qca6390/firmware/qca6390!bdwlan.elf' [ 60.730011] ueventd: loading /devices/platform/soc/b0000000.qcom,cnss-qca6390/firmware/qca6390!bdwlan.elf took 22ms [ 60.730532] cnss: Downloading BDF: qca6390/bdwlan.elf, size: 57908 [ 60.798774] cnss: Sending M3 information message, state: 0x13 [ 60.798842] cnss: M3 memory, va: 0xffffff8022268000, pa: 0x00000000a1800000, size: 0x411bc [ 60.809380] cnss: PM relax, state: 0x13, count: 0 [ 60.811247] cnss: Received QMI WLFW FW initialization done indication [ 60.811265] cnss: Posting event: FW_READY(4), state: 0x13 flags: 0x0 [ 60.811283] cnss: PM stay awake, state: 0x13, count: 1 [ 60.811306] cnss: PM relax, state: 0x13, count: 0 [ 60.811607] cnss: PM stay awake, state: 0x13, count: 1 [ 60.811622] cnss: Processing driver event: FW_READY(4), state: 0x13 [ 60.811634] cnss: PCIE Gen speed not setup [ 60.876775] msm_vidc: high: 00000001: ....e: Opening video instance: ffffffc8dde84000, 0 [ 60.905559] binder: 2064:2064 ioctl 40046210 7fc826c6b4 returned -22 [ 60.947892] msm_vidc: high: 00000001: h265e: Closed video instance: ffffffc8dde84000 [ 60.995061] binder: 1326:1326 ioctl 40046210 7fd9970ab4 returned -22 [ 61.129952] (NULL device *): Falling back to syfs fallback for: wlan/qca_cld/qca6390/WCNSS_qcom_cfg.ini [ 61.161389] msm_vidc: high: 00000001: ....d: Opening video instance: ffffffc8d9c30000, 1 [ 61.189215] msm_vidc: high: 00000001: h264d: Closed video instance: ffffffc8d9c30000 [ 61.196057] binder: 2106:2106 ioctl 40046210 7fc826c6b4 returned -22 [ 61.286598] [kworke][0x54883875][18:03:19.398522] wlan: [274:I:HDD] hdd_pm_qos_add_request: 9360: Set cpu_mask 0f for affine_cores [ 61.286639] [kworke][0x54883bd8][18:03:19.398567] wlan: [274:I:HDD] hdd_pm_qos_add_request: 9362: Set cpu_mask 0f for affine_cores [ 61.292801] cnss: Sending ini sync request, state: 0x17, fw_log_mode: 1 [ 61.306940] logd: Skipping entries from slow reader, pid 1262, fd 14, from LogBuffer::Prune() [ 61.307139] logd: Skipping entries from slow reader, pid 1262, fd 14, from LogBuffer::Prune() [ 61.307332] logd: Skipping entries from slow reader, pid 1262, fd 14, from LogBuffer::Prune() [ 61.315230] binder: 2064:2150 ioctl 40046210 79e26f8344 returned -22 [ 61.319599] [kworke][0x5491e33a][18:03:19.431520] wlan: [274:I:HIF] Initializing Runtime PM wakelock &sc->prevent_linkdown_lock [ 61.319883] [kworke][0x5491f257][18:03:19.431721] wlan: [274:I:HIF] hif_pci_enable_bus: con_mode = 0x0, WLAN_SOC_device_id = 0x1101 [ 61.319928] [kworke][0x5491fca6][18:03:19.431858] wlan: [274:I:HIF] hif_pci_enable_bus: hif_enable_pci done [ 61.331018] binder: 2140:2140 ioctl 40046210 7fc826c6b4 returned -22 [ 61.347618] msm_vidc: high: 00000001: ....d: Opening video instance: ffffffc8e2330000, 1 [ 61.364021] INFO: trying to register non-static key. [ 61.369133] the code is fine but needs lockdep annotation. [ 61.371513] binder: 1257:1257 ioctl 40046210 7febd80614 returned -22 [ 61.374780] CPU: 2 PID: 2173 Comm: VideoDecMsgThre Tainted: G S W O 4.19.157+ #1 [ 61.374783] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 61.374787] Call trace: [ 61.374799] dump_backtrace+0x0/0x258 [ 61.374803] show_stack+0x20/0x30 [ 61.374810] dump_stack+0xd8/0x12c [ 61.374816] register_lock_class+0x4d0/0x5c8 [ 61.374822] __lock_acquire+0xbc/0x1e58 [ 61.374827] lock_acquire+0x1cc/0x218 [ 61.374835] _raw_spin_lock_irqsave+0x54/0x98 [ 61.374842] __ion_system_secure_heap_resize+0x768/0x8c0 [ 61.374847] ion_system_secure_heap_prefetch+0x28/0x38 [ 61.374853] ion_walk_heaps+0x88/0xb8 [ 61.374857] ion_ioctl+0x1b0/0x2a8 [ 61.374865] __arm64_compat_sys_ioctl+0xf4/0x240 [ 61.374872] el0_svc_common+0xa4/0x190 [ 61.374877] el0_svc_compat_handler+0x28/0x38 [ 61.374883] el0_svc_compat+0x8/0x34 [ 61.375487] INFO: trying to register non-static key. [ 61.376850] [kworke][0x54a2a931][18:03:19.488772] wlan: [274:I:HIF] *********** QCA6390 *************\x0a [ 61.380585] the code is fine but needs lockdep annotation. [ 61.380589] CPU: 4 PID: 8 Comm: kworker/u16:0 Tainted: G S W O 4.19.157+ #1 [ 61.380590] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 61.380599] Workqueue: events_unbound ion_system_secure_heap_prefetch_work [ 61.380601] Call trace: [ 61.380605] dump_backtrace+0x0/0x258 [ 61.380607] show_stack+0x20/0x30 [ 61.380610] dump_stack+0xd8/0x12c [ 61.380613] register_lock_class+0x4d0/0x5c8 [ 61.380615] __lock_acquire+0xbc/0x1e58 [ 61.380617] lock_acquire+0x1cc/0x218 [ 61.380619] _raw_spin_lock_irqsave+0x54/0x98 [ 61.380621] ion_system_secure_heap_prefetch_work+0x48/0x2c0 [ 61.380624] process_one_work+0x38c/0x660 [ 61.380626] worker_thread+0x268/0x4b8 [ 61.380628] kthread+0x140/0x150 [ 61.380630] ret_from_fork+0x10/0x1c [ 61.389554] [kworke][0x54a661ed][18:03:19.501476] wlan: [274:I:HIF] hif_pci_enable_bus: hif_type = 0x12, target_type = 0x17 [ 61.389587] [kworke][0x54a66536][18:03:19.501519] wlan: [274:I:HIF] hif_register_tbl_attach: HIF_TYPE_QCA6390 [ 61.389616] [kworke][0x54a6674d][18:03:19.501547] wlan: [274:I:HIF] hif_target_register_tbl_attach: TARGET_TYPE_QCA6390 [ 61.389646] [kworke][0x54a66996][18:03:19.501577] wlan: [274:I:HIF] hif_pci_enable_bus:Skip tgt_wake up for srng devices\x0a [ 61.390953] [kworke][0x54a6cb63][18:03:19.502881] wlan: [274:E:TXRX] hif_print_hal_shadow_register_cfg: num_config 28 [ 61.403274] [kworke][0x54aa671e][18:03:19.515198] wlan: [274:I:TXRX] hif_print_hal_shadow_register_cfg: i 0, val a3b034 [ 61.403307] [kworke][0x54aa6a08][18:03:19.515237] wlan: [274:I:TXRX] hif_print_hal_shadow_register_cfg: i 1, val a3b03c [ 61.403317] INFO: trying to register non-static key. [ 61.403322] the code is fine but needs lockdep annotation. [ 61.403327] CPU: 5 PID: 2097 Comm: HwBinder:1335_3 Tainted: G S W O 4.19.157+ #1 [ 61.407228] INFO: trying to register non-static key. [ 61.407230] the code is fine but needs lockdep annotation. [ 61.408969] [kworke][0x54ac1286][18:03:19.520897] wlan: [274:I:TXRX] hif_print_hal_shadow_register_cfg: i 2, val a3b044 [ 61.414064] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 61.414065] Call trace: [ 61.414073] dump_backtrace+0x0/0x258 [ 61.414075] show_stack+0x20/0x30 [ 61.414080] dump_stack+0xd8/0x12c [ 61.414083] register_lock_class+0x4d0/0x5c8 [ 61.414085] __lock_acquire+0xbc/0x1e58 [ 61.414087] lock_acquire+0x1cc/0x218 [ 61.414091] _raw_spin_lock_irqsave+0x54/0x98 [ 61.414096] __ion_system_secure_heap_resize+0x768/0x8c0 [ 61.414098] ion_system_secure_heap_drain+0x28/0x38 [ 61.414099] ion_walk_heaps+0x88/0xb8 [ 61.414101] ion_ioctl+0x1b0/0x2a8 [ 61.414105] __arm64_compat_sys_ioctl+0xf4/0x240 [ 61.414107] el0_svc_common+0xa4/0x190 [ 61.414110] el0_svc_compat_handler+0x28/0x38 [ 61.414112] el0_svc_compat+0x8/0x34 [ 61.414116] CPU: 4 PID: 8 Comm: kworker/u16:0 Tainted: G S W O 4.19.157+ #1 [ 61.414117] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 61.414123] Workqueue: events_unbound ion_system_secure_heap_prefetch_work [ 61.414125] Call trace: [ 61.414128] dump_backtrace+0x0/0x258 [ 61.414130] show_stack+0x20/0x30 [ 61.414132] dump_stack+0xd8/0x12c [ 61.414134] register_lock_class+0x4d0/0x5c8 [ 61.414136] __lock_acquire+0xbc/0x1e58 [ 61.414138] lock_acquire+0x1cc/0x218 [ 61.414140] _raw_spin_lock_irqsave+0x54/0x98 [ 61.414142] ion_system_secure_heap_prefetch_work+0x94/0x2c0 [ 61.414145] process_one_work+0x38c/0x660 [ 61.414147] worker_thread+0x268/0x4b8 [ 61.414150] kthread+0x140/0x150 [ 61.414152] ret_from_fork+0x10/0x1c [ 61.415177] binder: undelivered TRANSACTION_COMPLETE [ 61.422859] [kworke][0x54b023b2][18:03:19.534780] wlan: [274:I:TXRX] hif_print_hal_shadow_register_cfg: i 3, val a3b04c [ 61.425296] [kworke][0x54b0db08][18:03:19.537223] wlan: [274:I:TXRX] hif_print_hal_shadow_register_cfg: i 4, val a3b054 [ 61.425330] [kworke][0x54b0ddab][18:03:19.537258] wlan: [274:I:TXRX] hif_print_hal_shadow_register_cfg: i 5, val a3b028 [ 61.425362] [kworke][0x54b0e021][18:03:19.537291] wlan: [274:I:TXRX] hif_print_hal_shadow_register_cfg: i 6, val a3b020 [ 61.425392] [kworke][0x54b0e283][18:03:19.537323] wlan: [274:I:TXRX] hif_print_hal_shadow_register_cfg: i 7, val a3b06c [ 61.425423] [kworke][0x54b0e4c8][18:03:19.537353] wlan: [274:I:TXRX] hif_print_hal_shadow_register_cfg: i 8, val a46000 [ 61.425452] [kworke][0x54b0e6f9][18:03:19.537382] wlan: [274:I:TXRX] hif_print_hal_shadow_register_cfg: i 9, val a46008 [ 61.425480] [kworke][0x54b0e920][18:03:19.537411] wlan: [274:I:TXRX] hif_print_hal_shadow_register_cfg: i 10, val a46010 [ 61.425508] [kworke][0x54b0eb48][18:03:19.537439] wlan: [274:I:TXRX] hif_print_hal_shadow_register_cfg: i 11, val a46018 [ 61.425542] [kworke][0x54b0ed80][18:03:19.537469] wlan: [274:I:TXRX] hif_print_hal_shadow_register_cfg: i 12, val a46034 [ 61.425570] [kworke][0x54b0efe7][18:03:19.537502] wlan: [274:I:TXRX] hif_print_hal_shadow_register_cfg: i 13, val a370b0 [ 61.425597] [kworke][0x54b0f1f4][18:03:19.537528] wlan: [274:I:TXRX] hif_print_hal_shadow_register_cfg: i 14, val a37018 [ 61.425624] [kworke][0x54b0f3fe][18:03:19.537555] wlan: [274:I:TXRX] hif_print_hal_shadow_register_cfg: i 15, val a370c4 [ 61.425731] [kworke][0x54b0f5fa][18:03:19.537582] wlan: [274:I:TXRX] hif_print_hal_shadow_register_cfg: i 16, val a370cc [ 61.425761] [kworke][0x54b0fe29][18:03:19.537691] wlan: [274:I:TXRX] hif_print_hal_shadow_register_cfg: i 17, val a370d4 [ 61.425790] [kworke][0x54b1005c][18:03:19.537720] wlan: [274:I:TXRX] hif_print_hal_shadow_register_cfg: i 18, val a370dc [ 61.425819] [kworke][0x54b10286][18:03:19.537750] wlan: [274:I:TXRX] hif_print_hal_shadow_register_cfg: i 19, val a00400 [ 61.425847] [kworke][0x54b104b1][18:03:19.537778] wlan: [274:I:TXRX] hif_print_hal_shadow_register_cfg: i 20, val a03400 [ 61.425879] [kworke][0x54b106fc][18:03:19.537809] wlan: [274:I:TXRX] hif_print_hal_shadow_register_cfg: i 21, val a0340c [ 61.425916] [kworke][0x54b1098e][18:03:19.537844] wlan: [274:I:TXRX] hif_print_hal_shadow_register_cfg: i 22, val a05400 [ 61.425947] [kworke][0x54b10c2b][18:03:19.537878] wlan: [274:I:TXRX] hif_print_hal_shadow_register_cfg: i 23, val a0540c [ 61.425975] [kworke][0x54b10e3d][18:03:19.537906] wlan: [274:I:TXRX] hif_print_hal_shadow_register_cfg: i 24, val a06400 [ 61.426002] [kworke][0x54b1104f][18:03:19.537933] wlan: [274:I:TXRX] hif_print_hal_shadow_register_cfg: i 25, val a08400 [ 61.426027] [kworke][0x54b11246][18:03:19.537959] wlan: [274:I:TXRX] hif_print_hal_shadow_register_cfg: i 26, val a0b400 [ 61.426056] [kworke][0x54b1142f][18:03:19.537985] wlan: [274:I:TXRX] hif_print_hal_shadow_register_cfg: i 27, val a0b40c [ 61.426087] cnss: Mode: 0, config: ffffff801a20b7b8, host_version: 5.2.022.10G [ 61.426120] cnss: Sending WLAN config message, state: 0x17 [ 61.438575] INFO: trying to register non-static key. [ 61.439452] binder: undelivered transaction 11383, process died. [ 61.441405] cnss: Sending mode message, mode: MISSION(0), state: 0x17 [ 61.443677] the code is fine but needs lockdep annotation. [ 61.443681] CPU: 4 PID: 8 Comm: kworker/u16:0 Tainted: G S W O 4.19.157+ #1 [ 61.443682] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 61.443694] Workqueue: events_unbound ion_system_secure_heap_prefetch_work [ 61.443696] Call trace: [ 61.443700] dump_backtrace+0x0/0x258 [ 61.443702] show_stack+0x20/0x30 [ 61.443705] dump_stack+0xd8/0x12c [ 61.443708] register_lock_class+0x4d0/0x5c8 [ 61.443710] __lock_acquire+0xbc/0x1e58 [ 61.443711] lock_acquire+0x1cc/0x218 [ 61.443714] _raw_spin_lock_irqsave+0x54/0x98 [ 61.443716] ion_system_secure_heap_prefetch_work+0x94/0x2c0 [ 61.443719] process_one_work+0x38c/0x660 [ 61.443721] worker_thread+0x268/0x4b8 [ 61.443722] kthread+0x140/0x150 [ 61.443725] ret_from_fork+0x10/0x1c [ 61.458454] INFO: trying to register non-static key. [ 61.463555] the code is fine but needs lockdep annotation. [ 61.465863] cnss: Received QMI WLFW pin connect result indication [ 61.466560] cnss: Assign MSI to user: CE, num_vectors: 10, user_base_data: 803, base_vector: 3 [ 61.469192] CPU: 4 PID: 8 Comm: kworker/u16:0 Tainted: G S W O 4.19.157+ #1 [ 61.469194] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 61.469205] Workqueue: events_unbound ion_system_secure_heap_prefetch_work [ 61.469207] Call trace: [ 61.469213] dump_backtrace+0x0/0x258 [ 61.469215] show_stack+0x20/0x30 [ 61.469218] dump_stack+0xd8/0x12c [ 61.469222] register_lock_class+0x4d0/0x5c8 [ 61.469224] __lock_acquire+0xbc/0x1e58 [ 61.469226] lock_acquire+0x1cc/0x218 [ 61.469229] _raw_spin_lock_irqsave+0x54/0x98 [ 61.469232] ion_system_secure_heap_prefetch_work+0x94/0x2c0 [ 61.469235] process_one_work+0x38c/0x660 [ 61.469238] worker_thread+0x268/0x4b8 [ 61.469240] kthread+0x140/0x150 [ 61.469242] ret_from_fork+0x10/0x1c [ 61.471385] cnss: Pin connect Result: pwr_pin: 0x1 phy_io_pin: 0x0 rf_io_pin: 0x0 [ 61.474621] msm_vidc: high: 00000001: h264d: Closed video instance: ffffffc8e2330000 [ 61.490334] [kworke][0x54c3e97f][18:03:19.602268] wlan: [274:I:HIF] ce_srng_dest_ring_setup: ce_id 1 [ 61.490347] cnss: Assign MSI to user: CE, num_vectors: 10, user_base_data: 803, base_vector: 3 [ 61.490407] INFO: trying to register non-static key. [ 61.490519] [kworke][0x54c3f7be][18:03:19.602457] wlan: [274:I:HIF] ce_srng_status_ring_setup: ce_id 1 [ 61.495512] the code is fine but needs lockdep annotation. [ 61.495516] CPU: 4 PID: 8 Comm: kworker/u16:0 Tainted: G S W O 4.19.157+ #1 [ 61.495517] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 61.495528] Workqueue: events_unbound ion_system_secure_heap_prefetch_work [ 61.495530] Call trace: [ 61.495534] dump_backtrace+0x0/0x258 [ 61.495536] show_stack+0x20/0x30 [ 61.495539] dump_stack+0xd8/0x12c [ 61.495542] register_lock_class+0x4d0/0x5c8 [ 61.495543] __lock_acquire+0xbc/0x1e58 [ 61.495545] lock_acquire+0x1cc/0x218 [ 61.495548] _raw_spin_lock_irqsave+0x54/0x98 [ 61.495550] ion_system_secure_heap_prefetch_work+0x94/0x2c0 [ 61.495553] process_one_work+0x38c/0x660 [ 61.495556] worker_thread+0x268/0x4b8 [ 61.495558] kthread+0x140/0x150 [ 61.495561] ret_from_fork+0x10/0x1c [ 61.502739] cnss: Assign MSI to user: CE, num_vectors: 10, user_base_data: 803, base_vector: 3 [ 61.502940] [kworke][0x54c79b50][18:03:19.614878] wlan: [274:I:HIF] ce_srng_dest_ring_setup: ce_id 2 [ 61.502948] cnss: Assign MSI to user: CE, num_vectors: 10, user_base_data: 803, base_vector: 3 [ 61.503101] [kworke][0x54c7a762][18:03:19.615039] wlan: [274:I:HIF] ce_srng_status_ring_setup: ce_id 2 [ 61.503108] cnss: Assign MSI to user: CE, num_vectors: 10, user_base_data: 803, base_vector: 3 [ 61.508489] cnss: Assign MSI to user: CE, num_vectors: 10, user_base_data: 803, base_vector: 3 [ 61.524879] INFO: trying to register non-static key. [ 61.529986] the code is fine but needs lockdep annotation. [ 61.535643] CPU: 4 PID: 8 Comm: kworker/u16:0 Tainted: G S W O 4.19.157+ #1 [ 61.535644] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 61.535656] Workqueue: events_unbound ion_system_secure_heap_prefetch_work [ 61.535658] Call trace: [ 61.535663] dump_backtrace+0x0/0x258 [ 61.535665] show_stack+0x20/0x30 [ 61.535668] dump_stack+0xd8/0x12c [ 61.535671] register_lock_class+0x4d0/0x5c8 [ 61.535673] __lock_acquire+0xbc/0x1e58 [ 61.535675] lock_acquire+0x1cc/0x218 [ 61.535678] _raw_spin_lock_irqsave+0x54/0x98 [ 61.535680] ion_system_secure_heap_prefetch_work+0x94/0x2c0 [ 61.535683] process_one_work+0x38c/0x660 [ 61.535686] worker_thread+0x268/0x4b8 [ 61.535688] kthread+0x140/0x150 [ 61.535690] ret_from_fork+0x10/0x1c [ 61.540888] [kworke][0x54d2b907][18:03:19.652821] wlan: [274:I:HIF] ce_srng_dest_ring_setup: ce_id 5 [ 61.540902] cnss: Assign MSI to user: CE, num_vectors: 10, user_base_data: 803, base_vector: 3 [ 61.543829] [kworke][0x54d2c8b7][18:03:19.653030] wlan: [274:I:HIF] ce_srng_status_ring_setup: ce_id 5 [ 61.543841] cnss: Assign MSI to user: CE, num_vectors: 10, user_base_data: 803, base_vector: 3 [ 61.544075] [kworke][0x54d3a862][18:03:19.656013] wlan: [274:I:HIF] hif_configure_irq: E [ 61.544084] cnss: Assign MSI to user: WAKE, num_vectors: 1, user_base_data: 813, base_vector: 13 [ 61.544096] cnss: Get IRQ number 425 for vector index 13 [ 61.545242] cnss: Assign MSI to user: CE, num_vectors: 10, user_base_data: 803, base_vector: 3 [ 61.545254] cnss: Get IRQ number 415 for vector index 3 [ 61.545416] cnss: Get IRQ number 416 for vector index 4 [ 61.546953] binder: 1928:1928 ioctl 40046210 7fc826bd24 returned -22 [ 61.556430] cnss: Get IRQ number 417 for vector index 5 [ 61.557083] cnss: Get IRQ number 418 for vector index 6 [ 61.557302] cnss: Get IRQ number 420 for vector index 8 [ 61.557520] cnss: Get IRQ number 421 for vector index 9 [ 61.557663] cnss: Get IRQ number 423 for vector index 11 [ 61.559487] [kworke][0x54d82c25][18:03:19.671423] wlan: [274:E:mlme] mlme_init_reg_cfg: 2374: null pdev [ 61.568159] INFO: trying to register non-static key. [ 61.572141] [kworke][0x54dbe15a][18:03:19.684079] wlan: [274:E:WMI] WMI handle is NULL [ 61.574232] the code is fine but needs lockdep annotation. [ 61.574238] CPU: 4 PID: 8 Comm: kworker/u16:0 Tainted: G S W O 4.19.157+ #1 [ 61.574240] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 61.574253] Workqueue: events_unbound ion_system_secure_heap_prefetch_work [ 61.574257] Call trace: [ 61.574263] dump_backtrace+0x0/0x258 [ 61.574266] show_stack+0x20/0x30 [ 61.574271] dump_stack+0xd8/0x12c [ 61.574276] register_lock_class+0x4d0/0x5c8 [ 61.574279] __lock_acquire+0xbc/0x1e58 [ 61.574282] lock_acquire+0x1cc/0x218 [ 61.574287] _raw_spin_lock_irqsave+0x54/0x98 [ 61.574291] ion_system_secure_heap_prefetch_work+0x94/0x2c0 [ 61.574296] process_one_work+0x38c/0x660 [ 61.574300] worker_thread+0x268/0x4b8 [ 61.574303] kthread+0x140/0x150 [ 61.574307] ret_from_fork+0x10/0x1c [ 61.591495] [kworke][0x54e18c94][18:03:19.703429] wlan: [274:I:HIF] Initializing Runtime PM wakelock &p2p_soc_obj->roc_runtime_lock [ 61.591533] cnss: Platform cap_flag is 0x4 [ 61.591550] [kworke][0x54e19107][18:03:19.703488] wlan: [274:E:QDF] cds_get_context: 1486: Module ID 66 context is Null [ 61.615172] INFO: trying to register non-static key. [ 61.620280] the code is fine but needs lockdep annotation. [ 61.625915] CPU: 4 PID: 8 Comm: kworker/u16:0 Tainted: G S W O 4.19.157+ #1 [ 61.625917] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 61.625928] Workqueue: events_unbound ion_system_secure_heap_prefetch_work [ 61.625931] Call trace: [ 61.625935] dump_backtrace+0x0/0x258 [ 61.625937] show_stack+0x20/0x30 [ 61.625941] dump_stack+0xd8/0x12c [ 61.625944] register_lock_class+0x4d0/0x5c8 [ 61.625946] __lock_acquire+0xbc/0x1e58 [ 61.625947] lock_acquire+0x1cc/0x218 [ 61.625951] _raw_spin_lock_irqsave+0x54/0x98 [ 61.625953] ion_system_secure_heap_prefetch_work+0x94/0x2c0 [ 61.625956] process_one_work+0x38c/0x660 [ 61.625958] worker_thread+0x268/0x4b8 [ 61.625960] kthread+0x140/0x150 [ 61.625963] ret_from_fork+0x10/0x1c [ 61.640532] mv2112_read_status [ 61.640780] mv2112_update_link: 3.0x901(1G): 0x80 [ 61.641023] mv2112_update_link: 3.0x8109(100M): 0x0 [ 61.641042] mv2112_update_link: link 0x0 [ 61.641063] mv2112_read_status: autoneg is disabled [ 61.667992] INFO: trying to register non-static key. [ 61.673094] the code is fine but needs lockdep annotation. [ 61.678738] CPU: 4 PID: 8 Comm: kworker/u16:0 Tainted: G S W O 4.19.157+ #1 [ 61.678740] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 61.678751] Workqueue: events_unbound ion_system_secure_heap_prefetch_work [ 61.678753] Call trace: [ 61.678758] dump_backtrace+0x0/0x258 [ 61.678761] show_stack+0x20/0x30 [ 61.678764] dump_stack+0xd8/0x12c [ 61.678768] register_lock_class+0x4d0/0x5c8 [ 61.678770] __lock_acquire+0xbc/0x1e58 [ 61.678771] lock_acquire+0x1cc/0x218 [ 61.678775] _raw_spin_lock_irqsave+0x54/0x98 [ 61.678778] ion_system_secure_heap_prefetch_work+0x94/0x2c0 [ 61.678781] process_one_work+0x38c/0x660 [ 61.678784] worker_thread+0x268/0x4b8 [ 61.678786] kthread+0x140/0x150 [ 61.678788] ret_from_fork+0x10/0x1c [ 61.691919] INFO: trying to register non-static key. [ 61.697024] the code is fine but needs lockdep annotation. [ 61.697203] binder: 2193:2193 ioctl 40046210 7fc826c6b4 returned -22 [ 61.702677] CPU: 4 PID: 8 Comm: kworker/u16:0 Tainted: G S W O 4.19.157+ #1 [ 61.702679] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 61.702690] Workqueue: events_unbound ion_system_secure_heap_prefetch_work [ 61.702692] Call trace: [ 61.702697] dump_backtrace+0x0/0x258 [ 61.702698] show_stack+0x20/0x30 [ 61.702702] dump_stack+0xd8/0x12c [ 61.702704] register_lock_class+0x4d0/0x5c8 [ 61.702706] __lock_acquire+0xbc/0x1e58 [ 61.702708] lock_acquire+0x1cc/0x218 [ 61.702711] _raw_spin_lock_irqsave+0x54/0x98 [ 61.702713] ion_system_secure_heap_prefetch_work+0x94/0x2c0 [ 61.702716] process_one_work+0x38c/0x660 [ 61.702718] worker_thread+0x268/0x4b8 [ 61.702720] kthread+0x140/0x150 [ 61.702722] ret_from_fork+0x10/0x1c [ 61.731071] INFO: trying to register non-static key. [ 61.736178] the code is fine but needs lockdep annotation. [ 61.740999] perfetto: enabled ftrace [ 61.741835] CPU: 4 PID: 8 Comm: kworker/u16:0 Tainted: G S W O 4.19.157+ #1 [ 61.741836] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 61.741847] Workqueue: events_unbound ion_system_secure_heap_prefetch_work [ 61.741850] Call trace: [ 61.741856] dump_backtrace+0x0/0x258 [ 61.741857] show_stack+0x20/0x30 [ 61.741861] dump_stack+0xd8/0x12c [ 61.741864] register_lock_class+0x4d0/0x5c8 [ 61.741866] __lock_acquire+0xbc/0x1e58 [ 61.741868] lock_acquire+0x1cc/0x218 [ 61.741872] _raw_spin_lock_irqsave+0x54/0x98 [ 61.741874] ion_system_secure_heap_prefetch_work+0x94/0x2c0 [ 61.741877] process_one_work+0x38c/0x660 [ 61.741880] worker_thread+0x268/0x4b8 [ 61.741882] kthread+0x140/0x150 [ 61.741885] ret_from_fork+0x10/0x1c [ 61.778316] INFO: trying to register non-static key. [ 61.783418] the code is fine but needs lockdep annotation. [ 61.789070] CPU: 4 PID: 8 Comm: kworker/u16:0 Tainted: G S W O 4.19.157+ #1 [ 61.789071] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 61.789083] Workqueue: events_unbound ion_system_secure_heap_prefetch_work [ 61.789085] Call trace: [ 61.789090] dump_backtrace+0x0/0x258 [ 61.789092] show_stack+0x20/0x30 [ 61.789096] dump_stack+0xd8/0x12c [ 61.789099] register_lock_class+0x4d0/0x5c8 [ 61.789101] __lock_acquire+0xbc/0x1e58 [ 61.789103] lock_acquire+0x1cc/0x218 [ 61.789106] _raw_spin_lock_irqsave+0x54/0x98 [ 61.789109] ion_system_secure_heap_prefetch_work+0x94/0x2c0 [ 61.789112] process_one_work+0x38c/0x660 [ 61.789114] worker_thread+0x268/0x4b8 [ 61.789117] kthread+0x140/0x150 [ 61.789119] ret_from_fork+0x10/0x1c [ 61.817522] [kworke][0x5523c3d0][18:03:19.929447] wlan: [274:E:QDF] cds_get_context: 1486: Module ID 66 context is Null [ 61.818363] msm_vidc: high: 00000001: ....d: Opening video instance: ffffffc8d9f3c000, 1 [ 61.833106] INFO: trying to register non-static key. [ 61.838206] the code is fine but needs lockdep annotation. [ 61.843837] CPU: 4 PID: 8 Comm: kworker/u16:0 Tainted: G S W O 4.19.157+ #1 [ 61.843839] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 61.843850] Workqueue: events_unbound ion_system_secure_heap_prefetch_work [ 61.843853] Call trace: [ 61.843858] dump_backtrace+0x0/0x258 [ 61.843861] show_stack+0x20/0x30 [ 61.843865] dump_stack+0xd8/0x12c [ 61.843868] register_lock_class+0x4d0/0x5c8 [ 61.843870] __lock_acquire+0xbc/0x1e58 [ 61.843873] lock_acquire+0x1cc/0x218 [ 61.843876] _raw_spin_lock_irqsave+0x54/0x98 [ 61.843879] ion_system_secure_heap_prefetch_work+0x94/0x2c0 [ 61.843882] process_one_work+0x38c/0x660 [ 61.843885] worker_thread+0x268/0x4b8 [ 61.843888] kthread+0x140/0x150 [ 61.843891] ret_from_fork+0x10/0x1c [ 61.880481] [kworke][0x55363540][18:03:19.992400] wlan: [274:I:HIF] Initializing Runtime PM wakelock &psoc_wakelock->wmi_cmd_rsp_runtime_lock [ 61.894245] INFO: trying to register non-static key. [ 61.896690] [kworke][0x553af538][18:03:20.008613] wlan: [274:F:WMA] WMA --> wmi_unified_attach - success [ 61.899353] the code is fine but needs lockdep annotation. [ 61.899358] CPU: 4 PID: 8 Comm: kworker/u16:0 Tainted: G S W O 4.19.157+ #1 [ 61.899363] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 61.913434] [kworke][0x553fdd6b][18:03:20.025361] wlan: [274:I:HIF] Initializing Runtime PM wakelock &vdev->vdev_set_key_runtime_wakelock [ 61.914762] Workqueue: events_unbound ion_system_secure_heap_prefetch_work [ 61.914765] Call trace: [ 61.914772] dump_backtrace+0x0/0x258 [ 61.914775] show_stack+0x20/0x30 [ 61.914781] dump_stack+0xd8/0x12c [ 61.914785] register_lock_class+0x4d0/0x5c8 [ 61.914788] __lock_acquire+0xbc/0x1e58 [ 61.914791] lock_acquire+0x1cc/0x218 [ 61.914795] _raw_spin_lock_irqsave+0x54/0x98 [ 61.914798] ion_system_secure_heap_prefetch_work+0x94/0x2c0 [ 61.914803] process_one_work+0x38c/0x660 [ 61.914806] worker_thread+0x268/0x4b8 [ 61.914809] kthread+0x140/0x150 [ 61.914814] ret_from_fork+0x10/0x1c [ 61.916889] [kworke][0x5540e06c][18:03:20.028815] wlan: [274:I:HIF] Initializing Runtime PM wakelock &vdev->vdev_set_key_runtime_wakelock [ 61.919111] [kworke][0x5541871c][18:03:20.031037] wlan: [274:I:HIF] Initializing Runtime PM wakelock &vdev->vdev_set_key_runtime_wakelock [ 61.920688] [kworke][0x5541fd55][18:03:20.032615] wlan: [274:I:HIF] Initializing Runtime PM wakelock &vdev->vdev_set_key_runtime_wakelock [ 61.922397] [kworke][0x55427d75][18:03:20.034322] wlan: [274:I:HIF] Initializing Runtime PM wakelock &vdev->vdev_set_key_runtime_wakelock [ 61.924193] [kworke][0x55430419][18:03:20.036118] wlan: [274:I:HIF] Initializing Runtime PM wakelock &vdev->vdev_set_key_runtime_wakelock [ 61.927419] msm_vidc: high: 00000001: h265d: Closed video instance: ffffffc8d9f3c000 [ 61.928208] [kworke][0x55443181][18:03:20.040136] wlan: [274:I:HIF] Initializing Runtime PM wakelock &wma_handle->wmi_cmd_rsp_runtime_lock [ 61.928437] [kworke][0x554435e9][18:03:20.040194] wlan: [274:I:HIF] Initializing Runtime PM wakelock &wma_handle->sap_prevent_runtime_pm_lock [ 61.930677] binder: 2206:2206 ioctl 40046210 7fc826c6b4 returned -22 [ 61.950988] binder: 2233:2233 ioctl 40046210 7fc826c6b4 returned -22 [ 61.975707] INFO: trying to register non-static key. [ 61.980807] the code is fine but needs lockdep annotation. [ 61.986444] CPU: 4 PID: 8 Comm: kworker/u16:0 Tainted: G S W O 4.19.157+ #1 [ 61.986446] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 61.986456] Workqueue: events_unbound ion_system_secure_heap_prefetch_work [ 61.986458] Call trace: [ 61.986463] dump_backtrace+0x0/0x258 [ 61.986465] show_stack+0x20/0x30 [ 61.986469] dump_stack+0xd8/0x12c [ 61.986472] register_lock_class+0x4d0/0x5c8 [ 61.986474] __lock_acquire+0xbc/0x1e58 [ 61.986476] lock_acquire+0x1cc/0x218 [ 61.986479] _raw_spin_lock_irqsave+0x54/0x98 [ 61.986481] ion_system_secure_heap_prefetch_work+0x94/0x2c0 [ 61.986484] process_one_work+0x38c/0x660 [ 61.986487] worker_thread+0x268/0x4b8 [ 61.986489] kthread+0x140/0x150 [ 61.986492] ret_from_fork+0x10/0x1c [ 62.007487] INFO: trying to register non-static key. [ 62.012595] the code is fine but needs lockdep annotation. [ 62.016381] binder: 2248:2248 ioctl 40046210 7fc826c6b4 returned -22 [ 62.018243] CPU: 4 PID: 8 Comm: kworker/u16:0 Tainted: G S W O 4.19.157+ #1 [ 62.018244] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 62.018256] Workqueue: events_unbound ion_system_secure_heap_prefetch_work [ 62.018260] Call trace: [ 62.018265] dump_backtrace+0x0/0x258 [ 62.018267] show_stack+0x20/0x30 [ 62.018272] dump_stack+0xd8/0x12c [ 62.018275] register_lock_class+0x4d0/0x5c8 [ 62.018277] __lock_acquire+0xbc/0x1e58 [ 62.018278] lock_acquire+0x1cc/0x218 [ 62.018282] _raw_spin_lock_irqsave+0x54/0x98 [ 62.018284] ion_system_secure_heap_prefetch_work+0x94/0x2c0 [ 62.018288] process_one_work+0x38c/0x660 [ 62.018290] worker_thread+0x268/0x4b8 [ 62.018292] kthread+0x140/0x150 [ 62.018295] ret_from_fork+0x10/0x1c [ 62.030658] msm_vidc: high: 00000001: ....d: Opening video instance: ffffffc8ce534000, 1 [ 62.048798] INFO: trying to register non-static key. [ 62.051495] msm_vidc: high: 00000001: h265d: Closed video instance: ffffffc8ce534000 [ 62.053904] the code is fine but needs lockdep annotation. [ 62.053909] CPU: 4 PID: 8 Comm: kworker/u16:0 Tainted: G S W O 4.19.157+ #1 [ 62.053910] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 62.053921] Workqueue: events_unbound ion_system_secure_heap_prefetch_work [ 62.053923] Call trace: [ 62.053928] dump_backtrace+0x0/0x258 [ 62.053929] show_stack+0x20/0x30 [ 62.053932] dump_stack+0xd8/0x12c [ 62.053935] register_lock_class+0x4d0/0x5c8 [ 62.053937] __lock_acquire+0xbc/0x1e58 [ 62.053938] lock_acquire+0x1cc/0x218 [ 62.053941] _raw_spin_lock_irqsave+0x54/0x98 [ 62.053943] ion_system_secure_heap_prefetch_work+0x94/0x2c0 [ 62.053946] process_one_work+0x38c/0x660 [ 62.053948] worker_thread+0x268/0x4b8 [ 62.053950] kthread+0x140/0x150 [ 62.053952] ret_from_fork+0x10/0x1c [ 62.055407] [kworke][0x55696ea9][18:03:20.167320] wlan: [274:E:QDF] htc_wait_target: 684: Target Ready! TX resource : 1 size:2176, MaxMsgsPerHTCBundle = 1 [ 62.074552] [kworke][0x556f10cc][18:03:20.186474] wlan: [274:E:QDF] htc_setup_target_buffer_assignments: 576: SVS Index : 1 TX : 0x100 : alloc:1 [ 62.088664] cnss: Assign MSI to user: DP, num_vectors: 18, user_base_data: 814, base_vector: 14 [ 62.093095] [kworke][0x55747fa1][18:03:20.205018] wlan: [274:I:HIF] +hif_update_pipe_callback pipeid 5\x0a [ 62.093161] [kworke][0x557482cc][18:03:20.205060] wlan: [274:I:HIF] -hif_update_pipe_callback\x0a [ 62.093207] cnss: Assign MSI to user: DP, num_vectors: 18, user_base_data: 814, base_vector: 14 [ 62.099852] INFO: trying to register non-static key. [ 62.102805] [kworke][0x55775848][18:03:20.214733] wlan: [274:E:DP] dp_srng_get_str_from_hal_ring_type: 7726: Invalid ring type [ 62.104960] the code is fine but needs lockdep annotation. [ 62.104964] CPU: 6 PID: 8 Comm: kworker/u16:0 Tainted: G S W O 4.19.157+ #1 [ 62.104965] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 62.104976] Workqueue: events_unbound ion_system_secure_heap_prefetch_work [ 62.104978] Call trace: [ 62.104983] dump_backtrace+0x0/0x258 [ 62.104985] show_stack+0x20/0x30 [ 62.104988] dump_stack+0xd8/0x12c [ 62.104991] register_lock_class+0x4d0/0x5c8 [ 62.104993] __lock_acquire+0xbc/0x1e58 [ 62.104995] lock_acquire+0x1cc/0x218 [ 62.104998] _raw_spin_lock_irqsave+0x54/0x98 [ 62.105000] ion_system_secure_heap_prefetch_work+0x94/0x2c0 [ 62.105003] process_one_work+0x38c/0x660 [ 62.105006] worker_thread+0x268/0x4b8 [ 62.105008] kthread+0x140/0x150 [ 62.105010] ret_from_fork+0x10/0x1c [ 62.122813] cnss: Assign MSI to user: DP, num_vectors: 18, user_base_data: 814, base_vector: 14 [ 62.123822] cnss: Assign MSI to user: DP, num_vectors: 18, user_base_data: 814, base_vector: 14 [ 62.124540] cnss: Assign MSI to user: DP, num_vectors: 18, user_base_data: 814, base_vector: 14 [ 62.124779] cnss: Assign MSI to user: DP, num_vectors: 18, user_base_data: 814, base_vector: 14 [ 62.125089] cnss: Assign MSI to user: DP, num_vectors: 18, user_base_data: 814, base_vector: 14 [ 62.125321] cnss: Assign MSI to user: DP, num_vectors: 18, user_base_data: 814, base_vector: 14 [ 62.125541] cnss: Assign MSI to user: DP, num_vectors: 18, user_base_data: 814, base_vector: 14 [ 62.125764] cnss: Assign MSI to user: DP, num_vectors: 18, user_base_data: 814, base_vector: 14 [ 62.125954] [kworke][0x557e2073][18:03:20.237882] wlan: [274:I:DP] dp_tx_soc_attach Tx Desc Alloc num_pool = 4, descs = 4096 [ 62.126794] [kworke][0x557e5f7e][18:03:20.238723] wlan: [274:I:DP] dp_tx_soc_attach MSDU Ext Desc Alloc 4, descs = 4096 [ 62.128025] [kworke][0x557ebbd3][18:03:20.239954] wlan: [274:I:DP] dp_tx_soc_attach HAL Tx init Success [ 62.128246] cnss: Assign MSI to user: DP, num_vectors: 18, user_base_data: 814, base_vector: 14 [ 62.129139] cnss: Assign MSI to user: DP, num_vectors: 18, user_base_data: 814, base_vector: 14 [ 62.129330] [kworke][0x557f1db5][18:03:20.241259] wlan: [274:I:DP] dp_soc_cmn_setup: 3274: num_reo_dest_rings 4 [ 62.129389] cnss: Assign MSI to user: DP, num_vectors: 18, user_base_data: 814, base_vector: 14 [ 62.129694] cnss: Assign MSI to user: DP, num_vectors: 18, user_base_data: 814, base_vector: 14 [ 62.130054] cnss: Assign MSI to user: DP, num_vectors: 18, user_base_data: 814, base_vector: 14 [ 62.130344] cnss: Assign MSI to user: DP, num_vectors: 18, user_base_data: 814, base_vector: 14 [ 62.130555] cnss: Assign MSI to user: DP, num_vectors: 18, user_base_data: 814, base_vector: 14 [ 62.130727] cnss: Assign MSI to user: DP, num_vectors: 18, user_base_data: 814, base_vector: 14 [ 62.131044] cnss: Assign MSI to user: DP, num_vectors: 18, user_base_data: 814, base_vector: 14 [ 62.131270] cnss: Assign MSI to user: DP, num_vectors: 18, user_base_data: 814, base_vector: 14 [ 62.131753] cnss: Assign MSI to user: DP, num_vectors: 18, user_base_data: 814, base_vector: 14 [ 62.132395] cnss: Assign MSI to user: DP, num_vectors: 18, user_base_data: 814, base_vector: 14 [ 62.132877] cnss: Assign MSI to user: DP, num_vectors: 18, user_base_data: 814, base_vector: 14 [ 62.133398] [kworke][0x55804ef7][18:03:20.245328] wlan: [274:I:HAL] hal_reo_set_err_dst_remap_6390: 1024: HWIO_REO_R0_ERROR_DESTINATION_MAPPING_IX_0 0x28005b6d [ 62.133457] cnss: Assign MSI to user: DP, num_vectors: 18, user_base_data: 814, base_vector: 14 [ 62.133697] cnss: Assign MSI to user: DP, num_vectors: 18, user_base_data: 814, base_vector: 14 [ 62.133989] cnss: Assign MSI to user: DP, num_vectors: 18, user_base_data: 814, base_vector: 14 [ 62.134215] cnss: Assign MSI to user: DP, num_vectors: 18, user_base_data: 814, base_vector: 14 [ 62.134451] cnss: Assign MSI to user: DP, num_vectors: 18, user_base_data: 814, base_vector: 14 [ 62.134836] cnss: Assign MSI to user: DP, num_vectors: 18, user_base_data: 814, base_vector: 14 [ 62.138610] INFO: trying to register non-static key. [ 62.143718] the code is fine but needs lockdep annotation. [ 62.149351] CPU: 6 PID: 8 Comm: kworker/u16:0 Tainted: G S W O 4.19.157+ #1 [ 62.149352] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 62.149364] Workqueue: events_unbound ion_system_secure_heap_prefetch_work [ 62.149366] Call trace: [ 62.149371] dump_backtrace+0x0/0x258 [ 62.149373] show_stack+0x20/0x30 [ 62.149377] dump_stack+0xd8/0x12c [ 62.149380] register_lock_class+0x4d0/0x5c8 [ 62.149382] __lock_acquire+0xbc/0x1e58 [ 62.149383] lock_acquire+0x1cc/0x218 [ 62.149386] _raw_spin_lock_irqsave+0x54/0x98 [ 62.149388] ion_system_secure_heap_prefetch_work+0x94/0x2c0 [ 62.149391] process_one_work+0x38c/0x660 [ 62.149394] worker_thread+0x268/0x4b8 [ 62.149396] kthread+0x140/0x150 [ 62.149398] ret_from_fork+0x10/0x1c [ 62.154704] i2c_geni 980000.i2c: i2c error :-107 [ 62.175861] INFO: trying to register non-static key. [ 62.180892] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 62.180964] the code is fine but needs lockdep annotation. [ 62.180968] CPU: 6 PID: 8 Comm: kworker/u16:0 Tainted: G S W O 4.19.157+ #1 [ 62.180972] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 62.180981] Workqueue: events_unbound ion_system_secure_heap_prefetch_work [ 62.193614] i2c_geni 980000.i2c: i2c error :-107 [ 62.196192] Call trace: [ 62.196197] dump_backtrace+0x0/0x258 [ 62.196198] show_stack+0x20/0x30 [ 62.196201] dump_stack+0xd8/0x12c [ 62.196207] register_lock_class+0x4d0/0x5c8 [ 62.200955] __lock_acquire+0xbc/0x1e58 [ 62.200957] lock_acquire+0x1cc/0x218 [ 62.200960] _raw_spin_lock_irqsave+0x54/0x98 [ 62.200963] ion_system_secure_heap_prefetch_work+0x94/0x2c0 [ 62.200966] process_one_work+0x38c/0x660 [ 62.200968] worker_thread+0x268/0x4b8 [ 62.200970] kthread+0x140/0x150 [ 62.200972] ret_from_fork+0x10/0x1c [ 62.201700] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 62.233026] msm_vidc: high: 00000001: ....d: Opening video instance: ffffffc95f750000, 1 [ 62.236974] INFO: trying to register non-static key. [ 62.242073] the code is fine but needs lockdep annotation. [ 62.247708] CPU: 7 PID: 8 Comm: kworker/u16:0 Tainted: G S W O 4.19.157+ #1 [ 62.247709] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 62.247720] Workqueue: events_unbound ion_system_secure_heap_prefetch_work [ 62.247721] Call trace: [ 62.247726] dump_backtrace+0x0/0x258 [ 62.247727] show_stack+0x20/0x30 [ 62.247730] dump_stack+0xd8/0x12c [ 62.247732] register_lock_class+0x4d0/0x5c8 [ 62.247733] __lock_acquire+0xbc/0x1e58 [ 62.247735] lock_acquire+0x1cc/0x218 [ 62.247737] _raw_spin_lock_irqsave+0x54/0x98 [ 62.247738] ion_system_secure_heap_prefetch_work+0x94/0x2c0 [ 62.247741] process_one_work+0x38c/0x660 [ 62.247742] worker_thread+0x268/0x4b8 [ 62.247744] kthread+0x140/0x150 [ 62.247745] ret_from_fork+0x10/0x1c [ 62.258480] INFO: trying to register non-static key. [ 62.263580] the code is fine but needs lockdep annotation. [ 62.265175] msm_vidc: high: 00000001: mpg2d: Closed video instance: ffffffc95f750000 [ 62.269216] CPU: 7 PID: 8 Comm: kworker/u16:0 Tainted: G S W O 4.19.157+ #1 [ 62.269217] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 62.269227] Workqueue: events_unbound ion_system_secure_heap_prefetch_work [ 62.269228] Call trace: [ 62.269232] dump_backtrace+0x0/0x258 [ 62.269234] show_stack+0x20/0x30 [ 62.269236] dump_stack+0xd8/0x12c [ 62.269239] register_lock_class+0x4d0/0x5c8 [ 62.269241] __lock_acquire+0xbc/0x1e58 [ 62.269243] lock_acquire+0x1cc/0x218 [ 62.269245] _raw_spin_lock_irqsave+0x54/0x98 [ 62.269248] ion_system_secure_heap_prefetch_work+0x94/0x2c0 [ 62.269250] process_one_work+0x38c/0x660 [ 62.269252] worker_thread+0x268/0x4b8 [ 62.269254] kthread+0x140/0x150 [ 62.269256] ret_from_fork+0x10/0x1c [ 62.278847] INFO: trying to register non-static key. [ 62.283949] the code is fine but needs lockdep annotation. [ 62.289596] CPU: 7 PID: 8 Comm: kworker/u16:0 Tainted: G S W O 4.19.157+ #1 [ 62.289597] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 62.289608] Workqueue: events_unbound ion_system_secure_heap_prefetch_work [ 62.289609] Call trace: [ 62.289613] dump_backtrace+0x0/0x258 [ 62.289615] show_stack+0x20/0x30 [ 62.289618] dump_stack+0xd8/0x12c [ 62.289620] register_lock_class+0x4d0/0x5c8 [ 62.289621] __lock_acquire+0xbc/0x1e58 [ 62.289622] lock_acquire+0x1cc/0x218 [ 62.289625] _raw_spin_lock_irqsave+0x54/0x98 [ 62.289627] ion_system_secure_heap_prefetch_work+0x94/0x2c0 [ 62.289629] process_one_work+0x38c/0x660 [ 62.289630] worker_thread+0x268/0x4b8 [ 62.289632] kthread+0x140/0x150 [ 62.289634] ret_from_fork+0x10/0x1c [ 62.296174] binder: 2299:2299 ioctl 40046210 7fc826c6b4 returned -22 [ 62.299261] INFO: trying to register non-static key. [ 62.304367] the code is fine but needs lockdep annotation. [ 62.309997] CPU: 7 PID: 8 Comm: kworker/u16:0 Tainted: G S W O 4.19.157+ #1 [ 62.309998] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 62.310008] Workqueue: events_unbound ion_system_secure_heap_prefetch_work [ 62.310010] Call trace: [ 62.310014] dump_backtrace+0x0/0x258 [ 62.310016] show_stack+0x20/0x30 [ 62.310019] dump_stack+0xd8/0x12c [ 62.310021] register_lock_class+0x4d0/0x5c8 [ 62.310022] __lock_acquire+0xbc/0x1e58 [ 62.310024] lock_acquire+0x1cc/0x218 [ 62.310026] _raw_spin_lock_irqsave+0x54/0x98 [ 62.310028] ion_system_secure_heap_prefetch_work+0x94/0x2c0 [ 62.310030] process_one_work+0x38c/0x660 [ 62.310032] worker_thread+0x268/0x4b8 [ 62.310033] kthread+0x140/0x150 [ 62.310035] ret_from_fork+0x10/0x1c [ 62.319399] INFO: trying to register non-static key. [ 62.324503] the code is fine but needs lockdep annotation. [ 62.330139] CPU: 7 PID: 8 Comm: kworker/u16:0 Tainted: G S W O 4.19.157+ #1 [ 62.330140] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 62.330150] Workqueue: events_unbound ion_system_secure_heap_prefetch_work [ 62.330152] Call trace: [ 62.330156] dump_backtrace+0x0/0x258 [ 62.330157] show_stack+0x20/0x30 [ 62.330160] dump_stack+0xd8/0x12c [ 62.330162] register_lock_class+0x4d0/0x5c8 [ 62.330164] __lock_acquire+0xbc/0x1e58 [ 62.330165] lock_acquire+0x1cc/0x218 [ 62.330167] _raw_spin_lock_irqsave+0x54/0x98 [ 62.330169] ion_system_secure_heap_prefetch_work+0x94/0x2c0 [ 62.330172] process_one_work+0x38c/0x660 [ 62.330174] worker_thread+0x268/0x4b8 [ 62.330176] kthread+0x140/0x150 [ 62.330178] ret_from_fork+0x10/0x1c [ 62.339285] INFO: trying to register non-static key. [ 62.344384] the code is fine but needs lockdep annotation. [ 62.350017] CPU: 7 PID: 8 Comm: kworker/u16:0 Tainted: G S W O 4.19.157+ #1 [ 62.350018] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 62.350028] Workqueue: events_unbound ion_system_secure_heap_prefetch_work [ 62.350030] Call trace: [ 62.350034] dump_backtrace+0x0/0x258 [ 62.350035] show_stack+0x20/0x30 [ 62.350038] dump_stack+0xd8/0x12c [ 62.350040] register_lock_class+0x4d0/0x5c8 [ 62.350041] __lock_acquire+0xbc/0x1e58 [ 62.350042] lock_acquire+0x1cc/0x218 [ 62.350045] _raw_spin_lock_irqsave+0x54/0x98 [ 62.350046] ion_system_secure_heap_prefetch_work+0x94/0x2c0 [ 62.350049] process_one_work+0x38c/0x660 [ 62.350050] worker_thread+0x268/0x4b8 [ 62.350052] kthread+0x140/0x150 [ 62.350053] ret_from_fork+0x10/0x1c [ 62.352356] binder: 2233:2233 ioctl 40046210 7fc826b664 returned -22 [ 62.358657] binder: 2328:2328 ioctl 40046210 7fc826c6b4 returned -22 [ 62.359308] INFO: trying to register non-static key. [ 62.364407] the code is fine but needs lockdep annotation. [ 62.370045] CPU: 7 PID: 8 Comm: kworker/u16:0 Tainted: G S W O 4.19.157+ #1 [ 62.370046] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 62.370055] Workqueue: events_unbound ion_system_secure_heap_prefetch_work [ 62.370057] Call trace: [ 62.370061] dump_backtrace+0x0/0x258 [ 62.370062] show_stack+0x20/0x30 [ 62.370065] dump_stack+0xd8/0x12c [ 62.370068] register_lock_class+0x4d0/0x5c8 [ 62.370069] __lock_acquire+0xbc/0x1e58 [ 62.370070] lock_acquire+0x1cc/0x218 [ 62.370072] _raw_spin_lock_irqsave+0x54/0x98 [ 62.370074] ion_system_secure_heap_prefetch_work+0x94/0x2c0 [ 62.370076] process_one_work+0x38c/0x660 [ 62.370077] worker_thread+0x268/0x4b8 [ 62.370079] kthread+0x140/0x150 [ 62.370080] ret_from_fork+0x10/0x1c [ 62.371542] msm_vidc: high: 00000001: ....d: Opening video instance: ffffffc8d6274000, 1 [ 62.379516] INFO: trying to register non-static key. [ 62.384617] the code is fine but needs lockdep annotation. [ 62.390252] CPU: 7 PID: 8 Comm: kworker/u16:0 Tainted: G S W O 4.19.157+ #1 [ 62.390253] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 62.390264] Workqueue: events_unbound ion_system_secure_heap_prefetch_work [ 62.390265] Call trace: [ 62.390269] dump_backtrace+0x0/0x258 [ 62.390271] show_stack+0x20/0x30 [ 62.390273] dump_stack+0xd8/0x12c [ 62.390276] register_lock_class+0x4d0/0x5c8 [ 62.390277] __lock_acquire+0xbc/0x1e58 [ 62.390278] lock_acquire+0x1cc/0x218 [ 62.390281] _raw_spin_lock_irqsave+0x54/0x98 [ 62.390282] ion_system_secure_heap_prefetch_work+0x94/0x2c0 [ 62.390285] process_one_work+0x38c/0x660 [ 62.390286] worker_thread+0x268/0x4b8 [ 62.390288] kthread+0x140/0x150 [ 62.390290] ret_from_fork+0x10/0x1c [ 62.392615] INFO: trying to register non-static key. [ 62.397721] the code is fine but needs lockdep annotation. [ 62.399916] INFO: trying to register non-static key. [ 62.403360] CPU: 6 PID: 2358 Comm: VideoDecMsgThre Tainted: G S W O 4.19.157+ #1 [ 62.408451] the code is fine but needs lockdep annotation. [ 62.408452] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 62.408453] Call trace: [ 62.414088] dump_backtrace+0x0/0x258 [ 62.414089] show_stack+0x20/0x30 [ 62.414094] dump_stack+0xd8/0x12c [ 62.414097] register_lock_class+0x4d0/0x5c8 [ 62.414099] __lock_acquire+0xbc/0x1e58 [ 62.414100] lock_acquire+0x1cc/0x218 [ 62.414104] _raw_spin_lock_irqsave+0x54/0x98 [ 62.414109] __ion_system_secure_heap_resize+0x768/0x8c0 [ 62.414110] ion_system_secure_heap_prefetch+0x28/0x38 [ 62.414112] ion_walk_heaps+0x88/0xb8 [ 62.414113] ion_ioctl+0x1b0/0x2a8 [ 62.414116] __arm64_compat_sys_ioctl+0xf4/0x240 [ 62.414119] el0_svc_common+0xa4/0x190 [ 62.414120] el0_svc_compat_handler+0x28/0x38 [ 62.414122] el0_svc_compat+0x8/0x34 [ 62.414124] CPU: 7 PID: 8 Comm: kworker/u16:0 Tainted: G S W O 4.19.157+ #1 [ 62.414125] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 62.414130] Workqueue: events_unbound ion_system_secure_heap_prefetch_work [ 62.414131] Call trace: [ 62.414133] dump_backtrace+0x0/0x258 [ 62.414134] show_stack+0x20/0x30 [ 62.414136] dump_stack+0xd8/0x12c [ 62.414137] register_lock_class+0x4d0/0x5c8 [ 62.414138] __lock_acquire+0xbc/0x1e58 [ 62.414140] lock_acquire+0x1cc/0x218 [ 62.414141] _raw_spin_lock_irqsave+0x54/0x98 [ 62.414142] ion_system_secure_heap_prefetch_work+0x94/0x2c0 [ 62.414145] process_one_work+0x38c/0x660 [ 62.414146] worker_thread+0x268/0x4b8 [ 62.414148] kthread+0x140/0x150 [ 62.414149] ret_from_fork+0x10/0x1c [ 62.417669] logd: Skipping entries from slow reader, pid 1262, fd 14, from LogBuffer::Prune() [ 62.424940] INFO: trying to register non-static key. [ 62.430039] the code is fine but needs lockdep annotation. [ 62.435673] CPU: 7 PID: 8 Comm: kworker/u16:0 Tainted: G S W O 4.19.157+ #1 [ 62.435674] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 62.435684] Workqueue: events_unbound ion_system_secure_heap_prefetch_work [ 62.435685] Call trace: [ 62.435689] dump_backtrace+0x0/0x258 [ 62.435690] show_stack+0x20/0x30 [ 62.435693] dump_stack+0xd8/0x12c [ 62.435696] register_lock_class+0x4d0/0x5c8 [ 62.435697] __lock_acquire+0xbc/0x1e58 [ 62.435698] lock_acquire+0x1cc/0x218 [ 62.435700] _raw_spin_lock_irqsave+0x54/0x98 [ 62.435702] ion_system_secure_heap_prefetch_work+0x94/0x2c0 [ 62.435704] process_one_work+0x38c/0x660 [ 62.435705] worker_thread+0x268/0x4b8 [ 62.435707] kthread+0x140/0x150 [ 62.435709] ret_from_fork+0x10/0x1c [ 62.447233] INFO: trying to register non-static key. [ 62.452340] the code is fine but needs lockdep annotation. [ 62.457972] CPU: 7 PID: 8 Comm: kworker/u16:0 Tainted: G S W O 4.19.157+ #1 [ 62.457973] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 62.457983] Workqueue: events_unbound ion_system_secure_heap_prefetch_work [ 62.457984] Call trace: [ 62.457988] dump_backtrace+0x0/0x258 [ 62.457990] show_stack+0x20/0x30 [ 62.457993] dump_stack+0xd8/0x12c [ 62.457995] register_lock_class+0x4d0/0x5c8 [ 62.457996] __lock_acquire+0xbc/0x1e58 [ 62.457997] lock_acquire+0x1cc/0x218 [ 62.458000] _raw_spin_lock_irqsave+0x54/0x98 [ 62.458001] ion_system_secure_heap_prefetch_work+0x94/0x2c0 [ 62.458003] process_one_work+0x38c/0x660 [ 62.458005] worker_thread+0x268/0x4b8 [ 62.458006] kthread+0x140/0x150 [ 62.458008] ret_from_fork+0x10/0x1c [ 62.468743] INFO: trying to register non-static key. [ 62.473856] the code is fine but needs lockdep annotation. [ 62.479506] CPU: 4 PID: 1381 Comm: HwBinder:1335_1 Tainted: G S W O 4.19.157+ #1 [ 62.479508] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 62.479509] Call trace: [ 62.479520] dump_backtrace+0x0/0x258 [ 62.479522] show_stack+0x20/0x30 [ 62.479528] dump_stack+0xd8/0x12c [ 62.479533] register_lock_class+0x4d0/0x5c8 [ 62.479535] __lock_acquire+0xbc/0x1e58 [ 62.479536] lock_acquire+0x1cc/0x218 [ 62.479542] _raw_spin_lock_irqsave+0x54/0x98 [ 62.479546] __ion_system_secure_heap_resize+0x768/0x8c0 [ 62.479548] ion_system_secure_heap_drain+0x28/0x38 [ 62.479550] ion_walk_heaps+0x88/0xb8 [ 62.479551] ion_ioctl+0x1b0/0x2a8 [ 62.479555] __arm64_compat_sys_ioctl+0xf4/0x240 [ 62.479557] el0_svc_common+0xa4/0x190 [ 62.479559] el0_svc_compat_handler+0x28/0x38 [ 62.479561] el0_svc_compat+0x8/0x34 [ 62.484794] INFO: trying to register non-static key. [ 62.489901] the code is fine but needs lockdep annotation. [ 62.495536] CPU: 7 PID: 8 Comm: kworker/u16:0 Tainted: G S W O 4.19.157+ #1 [ 62.495537] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 62.495548] Workqueue: events_unbound ion_system_secure_heap_prefetch_work [ 62.495549] Call trace: [ 62.495553] dump_backtrace+0x0/0x258 [ 62.495555] show_stack+0x20/0x30 [ 62.495558] dump_stack+0xd8/0x12c [ 62.495560] register_lock_class+0x4d0/0x5c8 [ 62.495561] __lock_acquire+0xbc/0x1e58 [ 62.495563] lock_acquire+0x1cc/0x218 [ 62.495565] _raw_spin_lock_irqsave+0x54/0x98 [ 62.495566] ion_system_secure_heap_prefetch_work+0x94/0x2c0 [ 62.495569] process_one_work+0x38c/0x660 [ 62.495570] worker_thread+0x268/0x4b8 [ 62.495572] kthread+0x140/0x150 [ 62.495574] ret_from_fork+0x10/0x1c [ 62.512881] msm_vidc: high: 00000001: mpg2d: Closed video instance: ffffffc8d6274000 [ 62.534547] INFO: trying to register non-static key. [ 62.539651] the code is fine but needs lockdep annotation. [ 62.545287] CPU: 7 PID: 8 Comm: kworker/u16:0 Tainted: G S W O 4.19.157+ #1 [ 62.545288] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 62.545298] Workqueue: events_unbound ion_system_secure_heap_prefetch_work [ 62.545300] Call trace: [ 62.545304] dump_backtrace+0x0/0x258 [ 62.545306] show_stack+0x20/0x30 [ 62.545309] dump_stack+0xd8/0x12c [ 62.545312] register_lock_class+0x4d0/0x5c8 [ 62.545313] __lock_acquire+0xbc/0x1e58 [ 62.545315] lock_acquire+0x1cc/0x218 [ 62.545317] _raw_spin_lock_irqsave+0x54/0x98 [ 62.545319] ion_system_secure_heap_prefetch_work+0x94/0x2c0 [ 62.545322] process_one_work+0x38c/0x660 [ 62.545323] worker_thread+0x268/0x4b8 [ 62.545325] kthread+0x140/0x150 [ 62.545327] ret_from_fork+0x10/0x1c [ 62.560900] INFO: trying to register non-static key. [ 62.566000] the code is fine but needs lockdep annotation. [ 62.569286] binder: 2368:2368 ioctl 40046210 7fc826c6b4 returned -22 [ 62.571638] CPU: 7 PID: 8 Comm: kworker/u16:0 Tainted: G S W O 4.19.157+ #1 [ 62.571639] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 62.571651] Workqueue: events_unbound ion_system_secure_heap_prefetch_work [ 62.571653] Call trace: [ 62.571657] dump_backtrace+0x0/0x258 [ 62.571659] show_stack+0x20/0x30 [ 62.571662] dump_stack+0xd8/0x12c [ 62.571664] register_lock_class+0x4d0/0x5c8 [ 62.571666] __lock_acquire+0xbc/0x1e58 [ 62.571667] lock_acquire+0x1cc/0x218 [ 62.571669] _raw_spin_lock_irqsave+0x54/0x98 [ 62.571671] ion_system_secure_heap_prefetch_work+0x94/0x2c0 [ 62.571673] process_one_work+0x38c/0x660 [ 62.571675] worker_thread+0x268/0x4b8 [ 62.571677] kthread+0x140/0x150 [ 62.571679] ret_from_fork+0x10/0x1c [ 62.599888] INFO: trying to register non-static key. [ 62.604995] the code is fine but needs lockdep annotation. [ 62.610647] CPU: 6 PID: 8 Comm: kworker/u16:0 Tainted: G S W O 4.19.157+ #1 [ 62.610648] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 62.610657] Workqueue: events_unbound ion_system_secure_heap_prefetch_work [ 62.610659] Call trace: [ 62.610664] dump_backtrace+0x0/0x258 [ 62.610665] show_stack+0x20/0x30 [ 62.610669] dump_stack+0xd8/0x12c [ 62.610671] register_lock_class+0x4d0/0x5c8 [ 62.610673] __lock_acquire+0xbc/0x1e58 [ 62.610674] lock_acquire+0x1cc/0x218 [ 62.610677] _raw_spin_lock_irqsave+0x54/0x98 [ 62.610678] ion_system_secure_heap_prefetch_work+0x94/0x2c0 [ 62.610681] process_one_work+0x38c/0x660 [ 62.610682] worker_thread+0x268/0x4b8 [ 62.610684] kthread+0x140/0x150 [ 62.610686] ret_from_fork+0x10/0x1c [ 62.613781] INFO: trying to register non-static key. [ 62.618885] the code is fine but needs lockdep annotation. [ 62.624515] CPU: 6 PID: 8 Comm: kworker/u16:0 Tainted: G S W O 4.19.157+ #1 [ 62.624516] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 62.624528] Workqueue: events_unbound ion_system_secure_heap_prefetch_work [ 62.624529] Call trace: [ 62.624534] dump_backtrace+0x0/0x258 [ 62.624535] show_stack+0x20/0x30 [ 62.624540] dump_stack+0xd8/0x12c [ 62.624543] register_lock_class+0x4d0/0x5c8 [ 62.624545] __lock_acquire+0xbc/0x1e58 [ 62.624547] lock_acquire+0x1cc/0x218 [ 62.624550] _raw_spin_lock_irqsave+0x54/0x98 [ 62.624552] ion_system_secure_heap_prefetch_work+0x94/0x2c0 [ 62.624555] process_one_work+0x38c/0x660 [ 62.624557] worker_thread+0x268/0x4b8 [ 62.624559] kthread+0x140/0x150 [ 62.624561] ret_from_fork+0x10/0x1c [ 62.627348] INFO: trying to register non-static key. [ 62.632450] the code is fine but needs lockdep annotation. [ 62.638090] CPU: 6 PID: 8 Comm: kworker/u16:0 Tainted: G S W O 4.19.157+ #1 [ 62.638093] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 62.638115] Workqueue: events_unbound ion_system_secure_heap_prefetch_work [ 62.638119] Call trace: [ 62.638128] dump_backtrace+0x0/0x258 [ 62.638130] show_stack+0x20/0x30 [ 62.638134] dump_stack+0xd8/0x12c [ 62.638137] register_lock_class+0x4d0/0x5c8 [ 62.638139] __lock_acquire+0xbc/0x1e58 [ 62.638141] lock_acquire+0x1cc/0x218 [ 62.638145] _raw_spin_lock_irqsave+0x54/0x98 [ 62.638147] ion_system_secure_heap_prefetch_work+0x94/0x2c0 [ 62.638150] process_one_work+0x38c/0x660 [ 62.638153] worker_thread+0x268/0x4b8 [ 62.638155] kthread+0x140/0x150 [ 62.638158] ret_from_fork+0x10/0x1c [ 62.640763] INFO: trying to register non-static key. [ 62.645872] the code is fine but needs lockdep annotation. [ 62.651503] CPU: 6 PID: 8 Comm: kworker/u16:0 Tainted: G S W O 4.19.157+ #1 [ 62.651505] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 62.651516] Workqueue: events_unbound ion_system_secure_heap_prefetch_work [ 62.651518] Call trace: [ 62.651523] dump_backtrace+0x0/0x258 [ 62.651525] show_stack+0x20/0x30 [ 62.651528] dump_stack+0xd8/0x12c [ 62.651531] register_lock_class+0x4d0/0x5c8 [ 62.651533] __lock_acquire+0xbc/0x1e58 [ 62.651534] lock_acquire+0x1cc/0x218 [ 62.651537] _raw_spin_lock_irqsave+0x54/0x98 [ 62.651539] ion_system_secure_heap_prefetch_work+0x94/0x2c0 [ 62.651542] process_one_work+0x38c/0x660 [ 62.651545] worker_thread+0x268/0x4b8 [ 62.651547] kthread+0x140/0x150 [ 62.651549] ret_from_fork+0x10/0x1c [ 62.654020] INFO: trying to register non-static key. [ 62.659128] the code is fine but needs lockdep annotation. [ 62.664472] mv2112_read_status [ 62.664788] CPU: 6 PID: 8 Comm: kworker/u16:0 Tainted: G S W O 4.19.157+ #1 [ 62.664791] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 62.664804] Workqueue: events_unbound ion_system_secure_heap_prefetch_work [ 62.664807] Call trace: [ 62.664813] dump_backtrace+0x0/0x258 [ 62.664817] show_stack+0x20/0x30 [ 62.664822] dump_stack+0xd8/0x12c [ 62.664827] register_lock_class+0x4d0/0x5c8 [ 62.664830] __lock_acquire+0xbc/0x1e58 [ 62.664833] lock_acquire+0x1cc/0x218 [ 62.664838] _raw_spin_lock_irqsave+0x54/0x98 [ 62.664841] ion_system_secure_heap_prefetch_work+0x94/0x2c0 [ 62.664846] process_one_work+0x38c/0x660 [ 62.664851] worker_thread+0x268/0x4b8 [ 62.664854] kthread+0x140/0x150 [ 62.664858] ret_from_fork+0x10/0x1c [ 62.665034] mv2112_update_link: 3.0x901(1G): 0x80 [ 62.665282] mv2112_update_link: 3.0x8109(100M): 0x0 [ 62.665301] mv2112_update_link: link 0x0 [ 62.665319] mv2112_read_status: autoneg is disabled [ 62.669870] INFO: trying to register non-static key. [ 62.674973] the code is fine but needs lockdep annotation. [ 62.680607] CPU: 6 PID: 8 Comm: kworker/u16:0 Tainted: G S W O 4.19.157+ #1 [ 62.680609] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 62.680620] Workqueue: events_unbound ion_system_secure_heap_prefetch_work [ 62.680622] Call trace: [ 62.680626] dump_backtrace+0x0/0x258 [ 62.680628] show_stack+0x20/0x30 [ 62.680631] dump_stack+0xd8/0x12c [ 62.680634] register_lock_class+0x4d0/0x5c8 [ 62.680636] __lock_acquire+0xbc/0x1e58 [ 62.680637] lock_acquire+0x1cc/0x218 [ 62.680640] _raw_spin_lock_irqsave+0x54/0x98 [ 62.680641] ion_system_secure_heap_prefetch_work+0x94/0x2c0 [ 62.680644] process_one_work+0x38c/0x660 [ 62.680646] worker_thread+0x268/0x4b8 [ 62.680648] kthread+0x140/0x150 [ 62.680650] ret_from_fork+0x10/0x1c [ 62.685655] INFO: trying to register non-static key. [ 62.690767] the code is fine but needs lockdep annotation. [ 62.696421] CPU: 6 PID: 8 Comm: kworker/u16:0 Tainted: G S W O 4.19.157+ #1 [ 62.696422] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 62.696434] Workqueue: events_unbound ion_system_secure_heap_prefetch_work [ 62.696437] Call trace: [ 62.696442] dump_backtrace+0x0/0x258 [ 62.696443] show_stack+0x20/0x30 [ 62.696447] dump_stack+0xd8/0x12c [ 62.696450] register_lock_class+0x4d0/0x5c8 [ 62.696452] __lock_acquire+0xbc/0x1e58 [ 62.696453] lock_acquire+0x1cc/0x218 [ 62.696456] _raw_spin_lock_irqsave+0x54/0x98 [ 62.696458] ion_system_secure_heap_prefetch_work+0x94/0x2c0 [ 62.696462] process_one_work+0x38c/0x660 [ 62.696464] worker_thread+0x268/0x4b8 [ 62.696466] kthread+0x140/0x150 [ 62.696468] ret_from_fork+0x10/0x1c [ 62.700945] msm_vidc: high: 00000001: ....d: Opening video instance: ffffffc8d4854000, 1 [ 62.702521] binder: 2396:2396 ioctl 40046210 7fc826c6b4 returned -22 [ 62.702857] INFO: trying to register non-static key. [ 62.707958] the code is fine but needs lockdep annotation. [ 62.713595] CPU: 6 PID: 8 Comm: kworker/u16:0 Tainted: G S W O 4.19.157+ #1 [ 62.713597] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 62.713608] Workqueue: events_unbound ion_system_secure_heap_prefetch_work [ 62.713611] Call trace: [ 62.713615] dump_backtrace+0x0/0x258 [ 62.713617] show_stack+0x20/0x30 [ 62.713620] dump_stack+0xd8/0x12c [ 62.713623] register_lock_class+0x4d0/0x5c8 [ 62.713624] __lock_acquire+0xbc/0x1e58 [ 62.713626] lock_acquire+0x1cc/0x218 [ 62.713628] _raw_spin_lock_irqsave+0x54/0x98 [ 62.713630] ion_system_secure_heap_prefetch_work+0x94/0x2c0 [ 62.713633] process_one_work+0x38c/0x660 [ 62.713635] worker_thread+0x268/0x4b8 [ 62.713636] kthread+0x140/0x150 [ 62.713639] ret_from_fork+0x10/0x1c [ 62.723119] INFO: trying to register non-static key. [ 62.725035] msm_vidc: high: 00000001: vp8d: Closed video instance: ffffffc8d4854000 [ 62.728227] the code is fine but needs lockdep annotation. [ 62.728233] CPU: 6 PID: 8 Comm: kworker/u16:0 Tainted: G S W O 4.19.157+ #1 [ 62.733872] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 62.733883] Workqueue: events_unbound ion_system_secure_heap_prefetch_work [ 62.733884] Call trace: [ 62.733889] dump_backtrace+0x0/0x258 [ 62.733890] show_stack+0x20/0x30 [ 62.733894] dump_stack+0xd8/0x12c [ 62.733897] register_lock_class+0x4d0/0x5c8 [ 62.733898] __lock_acquire+0xbc/0x1e58 [ 62.733900] lock_acquire+0x1cc/0x218 [ 62.733903] _raw_spin_lock_irqsave+0x54/0x98 [ 62.733905] ion_system_secure_heap_prefetch_work+0x94/0x2c0 [ 62.733907] process_one_work+0x38c/0x660 [ 62.733909] worker_thread+0x268/0x4b8 [ 62.733910] kthread+0x140/0x150 [ 62.733912] ret_from_fork+0x10/0x1c [ 62.738823] INFO: trying to register non-static key. [ 62.743929] the code is fine but needs lockdep annotation. [ 62.749572] CPU: 6 PID: 8 Comm: kworker/u16:0 Tainted: G S W O 4.19.157+ #1 [ 62.749574] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 62.749586] Workqueue: events_unbound ion_system_secure_heap_prefetch_work [ 62.749588] Call trace: [ 62.749593] dump_backtrace+0x0/0x258 [ 62.749595] show_stack+0x20/0x30 [ 62.749600] dump_stack+0xd8/0x12c [ 62.749604] register_lock_class+0x4d0/0x5c8 [ 62.749606] __lock_acquire+0xbc/0x1e58 [ 62.749608] lock_acquire+0x1cc/0x218 [ 62.749612] _raw_spin_lock_irqsave+0x54/0x98 [ 62.749616] ion_system_secure_heap_prefetch_work+0x94/0x2c0 [ 62.749620] process_one_work+0x38c/0x660 [ 62.749623] worker_thread+0x268/0x4b8 [ 62.749626] kthread+0x140/0x150 [ 62.749630] ret_from_fork+0x10/0x1c [ 62.754424] INFO: trying to register non-static key. [ 62.759529] the code is fine but needs lockdep annotation. [ 62.765161] CPU: 6 PID: 8 Comm: kworker/u16:0 Tainted: G S W O 4.19.157+ #1 [ 62.765162] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 62.765172] Workqueue: events_unbound ion_system_secure_heap_prefetch_work [ 62.765174] Call trace: [ 62.765178] dump_backtrace+0x0/0x258 [ 62.765180] show_stack+0x20/0x30 [ 62.765183] dump_stack+0xd8/0x12c [ 62.765186] register_lock_class+0x4d0/0x5c8 [ 62.765188] __lock_acquire+0xbc/0x1e58 [ 62.765189] lock_acquire+0x1cc/0x218 [ 62.765192] _raw_spin_lock_irqsave+0x54/0x98 [ 62.765194] ion_system_secure_heap_prefetch_work+0x94/0x2c0 [ 62.765197] process_one_work+0x38c/0x660 [ 62.765198] worker_thread+0x268/0x4b8 [ 62.765201] kthread+0x140/0x150 [ 62.765203] ret_from_fork+0x10/0x1c [ 62.768056] INFO: trying to register non-static key. [ 62.773164] the code is fine but needs lockdep annotation. [ 62.778811] CPU: 6 PID: 8 Comm: kworker/u16:0 Tainted: G S W O 4.19.157+ #1 [ 62.778813] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 62.778822] Workqueue: events_unbound ion_system_secure_heap_prefetch_work [ 62.778824] Call trace: [ 62.778829] dump_backtrace+0x0/0x258 [ 62.778830] show_stack+0x20/0x30 [ 62.778834] dump_stack+0xd8/0x12c [ 62.778836] register_lock_class+0x4d0/0x5c8 [ 62.778838] __lock_acquire+0xbc/0x1e58 [ 62.778840] lock_acquire+0x1cc/0x218 [ 62.778842] _raw_spin_lock_irqsave+0x54/0x98 [ 62.778844] ion_system_secure_heap_prefetch_work+0x94/0x2c0 [ 62.778847] process_one_work+0x38c/0x660 [ 62.778849] worker_thread+0x268/0x4b8 [ 62.778851] kthread+0x140/0x150 [ 62.778854] ret_from_fork+0x10/0x1c [ 62.784161] INFO: trying to register non-static key. [ 62.789266] the code is fine but needs lockdep annotation. [ 62.794927] CPU: 6 PID: 8 Comm: kworker/u16:0 Tainted: G S W O 4.19.157+ #1 [ 62.794929] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 62.794941] Workqueue: events_unbound ion_system_secure_heap_prefetch_work [ 62.794943] Call trace: [ 62.794948] dump_backtrace+0x0/0x258 [ 62.794950] show_stack+0x20/0x30 [ 62.794953] dump_stack+0xd8/0x12c [ 62.794956] register_lock_class+0x4d0/0x5c8 [ 62.794958] __lock_acquire+0xbc/0x1e58 [ 62.794960] lock_acquire+0x1cc/0x218 [ 62.794964] _raw_spin_lock_irqsave+0x54/0x98 [ 62.794966] ion_system_secure_heap_prefetch_work+0x94/0x2c0 [ 62.794969] process_one_work+0x38c/0x660 [ 62.794971] worker_thread+0x268/0x4b8 [ 62.794974] kthread+0x140/0x150 [ 62.794976] ret_from_fork+0x10/0x1c [ 62.798652] binder: 2438:2438 ioctl 40046210 7fc826c6b4 returned -22 [ 62.802796] INFO: trying to register non-static key. [ 62.807904] the code is fine but needs lockdep annotation. [ 62.813560] CPU: 6 PID: 8 Comm: kworker/u16:0 Tainted: G S W O 4.19.157+ #1 [ 62.813562] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 62.813573] Workqueue: events_unbound ion_system_secure_heap_prefetch_work [ 62.813575] Call trace: [ 62.813580] dump_backtrace+0x0/0x258 [ 62.813581] show_stack+0x20/0x30 [ 62.813585] dump_stack+0xd8/0x12c [ 62.813588] register_lock_class+0x4d0/0x5c8 [ 62.813589] __lock_acquire+0xbc/0x1e58 [ 62.813591] lock_acquire+0x1cc/0x218 [ 62.813594] _raw_spin_lock_irqsave+0x54/0x98 [ 62.813596] ion_system_secure_heap_prefetch_work+0x94/0x2c0 [ 62.813599] process_one_work+0x38c/0x660 [ 62.813601] worker_thread+0x268/0x4b8 [ 62.813603] kthread+0x140/0x150 [ 62.813605] ret_from_fork+0x10/0x1c [ 62.816259] INFO: trying to register non-static key. [ 62.821361] the code is fine but needs lockdep annotation. [ 62.827015] CPU: 6 PID: 8 Comm: kworker/u16:0 Tainted: G S W O 4.19.157+ #1 [ 62.827017] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 62.827027] Workqueue: events_unbound ion_system_secure_heap_prefetch_work [ 62.827029] Call trace: [ 62.827033] dump_backtrace+0x0/0x258 [ 62.827035] show_stack+0x20/0x30 [ 62.827038] dump_stack+0xd8/0x12c [ 62.827041] register_lock_class+0x4d0/0x5c8 [ 62.827043] __lock_acquire+0xbc/0x1e58 [ 62.827044] lock_acquire+0x1cc/0x218 [ 62.827047] _raw_spin_lock_irqsave+0x54/0x98 [ 62.827049] ion_system_secure_heap_prefetch_work+0x94/0x2c0 [ 62.827052] process_one_work+0x38c/0x660 [ 62.827054] worker_thread+0x268/0x4b8 [ 62.827056] kthread+0x140/0x150 [ 62.827058] ret_from_fork+0x10/0x1c [ 62.833484] binder: 2328:2328 ioctl 40046210 7fc826a694 returned -22 [ 62.841664] INFO: trying to register non-static key. [ 62.846774] the code is fine but needs lockdep annotation. [ 62.852405] CPU: 6 PID: 8 Comm: kworker/u16:0 Tainted: G S W O 4.19.157+ #1 [ 62.852407] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 62.852417] Workqueue: events_unbound ion_system_secure_heap_prefetch_work [ 62.852419] Call trace: [ 62.852423] dump_backtrace+0x0/0x258 [ 62.852425] show_stack+0x20/0x30 [ 62.852429] dump_stack+0xd8/0x12c [ 62.852431] register_lock_class+0x4d0/0x5c8 [ 62.852433] __lock_acquire+0xbc/0x1e58 [ 62.852434] lock_acquire+0x1cc/0x218 [ 62.852437] _raw_spin_lock_irqsave+0x54/0x98 [ 62.852439] ion_system_secure_heap_prefetch_work+0x94/0x2c0 [ 62.852442] process_one_work+0x38c/0x660 [ 62.852444] worker_thread+0x268/0x4b8 [ 62.852446] kthread+0x140/0x150 [ 62.852448] ret_from_fork+0x10/0x1c [ 62.862818] INFO: trying to register non-static key. [ 62.864858] bt_ioctl: BT_CMD_PWR_CTRL pwr_cntrl:0 [ 62.867928] the code is fine but needs lockdep annotation. [ 62.867932] CPU: 6 PID: 8 Comm: kworker/u16:0 Tainted: G S W O 4.19.157+ #1 [ 62.867934] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 62.873370] bt_ioctl: BT state already:0 no change done\x0a [ 62.878436] Workqueue: events_unbound ion_system_secure_heap_prefetch_work [ 62.878438] Call trace: [ 62.878442] dump_backtrace+0x0/0x258 [ 62.878443] show_stack+0x20/0x30 [ 62.878447] dump_stack+0xd8/0x12c [ 62.878449] register_lock_class+0x4d0/0x5c8 [ 62.878451] __lock_acquire+0xbc/0x1e58 [ 62.878452] lock_acquire+0x1cc/0x218 [ 62.878455] _raw_spin_lock_irqsave+0x54/0x98 [ 62.878457] ion_system_secure_heap_prefetch_work+0x94/0x2c0 [ 62.878460] process_one_work+0x38c/0x660 [ 62.878462] worker_thread+0x268/0x4b8 [ 62.878463] kthread+0x140/0x150 [ 62.878465] ret_from_fork+0x10/0x1c [ 62.886576] bt_ioctl: BT_CMD_PWR_CTRL pwr_cntrl:1 [ 62.894943] msm_vidc: high: 00000001: ....d: Opening video instance: ffffffc8cdca8000, 1 [ 62.895601] bt_power vendor:bt_qca6390: Linked as a consumer to regulator.9 [ 62.895711] bt_vreg_enable: vreg_en successful for : qca,bt-vdd-aon [ 62.903088] bt_power vendor:bt_qca6390: Linked as a consumer to regulator.51 [ 62.903102] bt_vreg_enable: vreg_en successful for : qca,bt-vdd-dig [ 62.910132] bt_power vendor:bt_qca6390: Linked as a consumer to regulator.8 [ 62.910148] bt_vreg_enable: vreg_en successful for : qca,bt-vdd-rfa1 [ 62.914664] INFO: trying to register non-static key. [ 62.918315] bt_power vendor:bt_qca6390: Linked as a consumer to regulator.36 [ 62.921786] the code is fine but needs lockdep annotation. [ 62.921790] CPU: 6 PID: 8 Comm: kworker/u16:0 Tainted: G S W O 4.19.157+ #1 [ 62.921791] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 62.921801] Workqueue: events_unbound ion_system_secure_heap_prefetch_work [ 62.921803] Call trace: [ 62.921807] dump_backtrace+0x0/0x258 [ 62.921809] show_stack+0x20/0x30 [ 62.921811] dump_stack+0xd8/0x12c [ 62.921814] register_lock_class+0x4d0/0x5c8 [ 62.921815] __lock_acquire+0xbc/0x1e58 [ 62.921816] lock_acquire+0x1cc/0x218 [ 62.921819] _raw_spin_lock_irqsave+0x54/0x98 [ 62.921820] ion_system_secure_heap_prefetch_work+0x94/0x2c0 [ 62.921825] process_one_work+0x38c/0x660 [ 62.921827] worker_thread+0x268/0x4b8 [ 62.921828] kthread+0x140/0x150 [ 62.921830] ret_from_fork+0x10/0x1c [ 62.922132] logd: Skipping entries from slow reader, pid 1262, fd 14, from LogBuffer::Prune() [ 62.930500] [kworke][0x5669d567][18:03:21.042428] wlan: [274:I:DP] Peer pool init [ 62.930801] bt_vreg_enable: vreg_en successful for : qca,bt-vdd-rfa2 [ 62.930850] [kworke][0x5669efcc][18:03:21.042780] wlan: [274:W:DP] dp_rx_pdev_mon_attach: pdev attach id=0 [ 62.933888] logd: Skipping entries from slow reader, pid 1262, fd 14, from LogBuffer::Prune() [ 62.934911] msm_vidc: high: 00000001: vp9d: Closed video instance: ffffffc8cdca8000 [ 62.939379] bt_power vendor:bt_qca6390: Linked as a consumer to regulator.27 [ 62.943778] bt_vreg_enable: vreg_en successful for : qca,bt-vdd-asd [ 62.948516] INFO: trying to register non-static key. [ 62.955337] the code is fine but needs lockdep annotation. [ 62.960978] CPU: 6 PID: 8 Comm: kworker/u16:0 Tainted: G S W O 4.19.157+ #1 [ 62.960979] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 62.960991] Workqueue: events_unbound ion_system_secure_heap_prefetch_work [ 62.960994] Call trace: [ 62.960999] dump_backtrace+0x0/0x258 [ 62.961001] show_stack+0x20/0x30 [ 62.961005] dump_stack+0xd8/0x12c [ 62.961008] register_lock_class+0x4d0/0x5c8 [ 62.961010] __lock_acquire+0xbc/0x1e58 [ 62.961012] lock_acquire+0x1cc/0x218 [ 62.961015] _raw_spin_lock_irqsave+0x54/0x98 [ 62.961017] ion_system_secure_heap_prefetch_work+0x94/0x2c0 [ 62.961021] process_one_work+0x38c/0x660 [ 62.961023] worker_thread+0x268/0x4b8 [ 62.961025] kthread+0x140/0x150 [ 62.961028] ret_from_fork+0x10/0x1c [ 62.973423] INFO: trying to register non-static key. [ 62.978527] the code is fine but needs lockdep annotation. [ 62.984167] CPU: 6 PID: 8 Comm: kworker/u16:0 Tainted: G S W O 4.19.157+ #1 [ 62.984169] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 62.984180] Workqueue: events_unbound ion_system_secure_heap_prefetch_work [ 62.984181] Call trace: [ 62.984186] dump_backtrace+0x0/0x258 [ 62.984187] show_stack+0x20/0x30 [ 62.984191] dump_stack+0xd8/0x12c [ 62.984194] register_lock_class+0x4d0/0x5c8 [ 62.984195] __lock_acquire+0xbc/0x1e58 [ 62.984197] lock_acquire+0x1cc/0x218 [ 62.984199] _raw_spin_lock_irqsave+0x54/0x98 [ 62.984201] ion_system_secure_heap_prefetch_work+0x94/0x2c0 [ 62.984204] process_one_work+0x38c/0x660 [ 62.984206] worker_thread+0x268/0x4b8 [ 62.984207] kthread+0x140/0x150 [ 62.984210] ret_from_fork+0x10/0x1c [ 62.995205] INFO: trying to register non-static key. [ 63.000311] the code is fine but needs lockdep annotation. [ 63.005948] CPU: 6 PID: 8 Comm: kworker/u16:0 Tainted: G S W O 4.19.157+ #1 [ 63.005950] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 63.005961] Workqueue: events_unbound ion_system_secure_heap_prefetch_work [ 63.005963] Call trace: [ 63.005967] dump_backtrace+0x0/0x258 [ 63.005969] show_stack+0x20/0x30 [ 63.005972] dump_stack+0xd8/0x12c [ 63.005975] register_lock_class+0x4d0/0x5c8 [ 63.005977] __lock_acquire+0xbc/0x1e58 [ 63.005979] lock_acquire+0x1cc/0x218 [ 63.005982] _raw_spin_lock_irqsave+0x54/0x98 [ 63.005984] ion_system_secure_heap_prefetch_work+0x94/0x2c0 [ 63.005987] process_one_work+0x38c/0x660 [ 63.005989] worker_thread+0x268/0x4b8 [ 63.005991] kthread+0x140/0x150 [ 63.005994] ret_from_fork+0x10/0x1c [ 63.008725] binder: 2368:2469 ioctl 40046210 7a3ea761f4 returned -22 [ 63.009018] bt_configure_gpios: BTON:Turn Bt Off bt-reset-gpio(1121) value(0) [ 63.009033] bt_configure_gpios: BTON:Turn Bt Off [ 63.009052] bt_configure_gpios: bt-sw-ctrl-gpio(1224) value(1) [ 63.009059] bt_enable_bt_reset_gpios_safely: bt_enable_bt_reset_gpios_safely: BTON:Turn Bt On [ 63.009067] bt_enable_bt_reset_gpios_safely: bt_enable_bt_reset_gpios_safely: wl-reset-gpio(1120) value(1) [ 63.009075] bt_enable_bt_reset_gpios_safely: bt_enable_bt_reset_gpios_safely: BTON: Asserting BT_EN [ 63.014011] msm_vidc: high: 00000001: ....d: Opening video instance: ffffffc8e4164000, 1 [ 63.021227] INFO: trying to register non-static key. [ 63.026335] the code is fine but needs lockdep annotation. [ 63.031971] CPU: 6 PID: 8 Comm: kworker/u16:0 Tainted: G S W O 4.19.157+ #1 [ 63.031972] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 63.031984] Workqueue: events_unbound ion_system_secure_heap_prefetch_work [ 63.031986] Call trace: [ 63.031991] dump_backtrace+0x0/0x258 [ 63.031993] show_stack+0x20/0x30 [ 63.031996] dump_stack+0xd8/0x12c [ 63.031999] register_lock_class+0x4d0/0x5c8 [ 63.032001] __lock_acquire+0xbc/0x1e58 [ 63.032006] lock_acquire+0x1cc/0x218 [ 63.032009] _raw_spin_lock_irqsave+0x54/0x98 [ 63.032011] ion_system_secure_heap_prefetch_work+0x94/0x2c0 [ 63.032014] process_one_work+0x38c/0x660 [ 63.032016] worker_thread+0x268/0x4b8 [ 63.032018] kthread+0x140/0x150 [ 63.032020] ret_from_fork+0x10/0x1c [ 63.043265] INFO: trying to register non-static key. [ 63.048369] the code is fine but needs lockdep annotation. [ 63.054007] CPU: 6 PID: 8 Comm: kworker/u16:0 Tainted: G S W O 4.19.157+ #1 [ 63.054009] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 63.054021] Workqueue: events_unbound ion_system_secure_heap_prefetch_work [ 63.054024] Call trace: [ 63.054030] dump_backtrace+0x0/0x258 [ 63.054032] show_stack+0x20/0x30 [ 63.054036] dump_stack+0xd8/0x12c [ 63.054040] register_lock_class+0x4d0/0x5c8 [ 63.054042] __lock_acquire+0xbc/0x1e58 [ 63.054044] lock_acquire+0x1cc/0x218 [ 63.054048] _raw_spin_lock_irqsave+0x54/0x98 [ 63.054050] ion_system_secure_heap_prefetch_work+0x94/0x2c0 [ 63.054054] process_one_work+0x38c/0x660 [ 63.054057] worker_thread+0x268/0x4b8 [ 63.054059] kthread+0x140/0x150 [ 63.054062] ret_from_fork+0x10/0x1c [ 63.056986] msm_vidc: high: 00000001: vp9d: Closed video instance: ffffffc8e4164000 [ 63.058422] cnss: Assign MSI to user: DP, num_vectors: 18, user_base_data: 814, base_vector: 14 [ 63.058468] cnss: Get IRQ number 426 for vector index 14 [ 63.059065] cnss: Assign MSI to user: DP, num_vectors: 18, user_base_data: 814, base_vector: 14 [ 63.059099] cnss: Get IRQ number 427 for vector index 15 [ 63.059141] cnss: Assign MSI to user: DP, num_vectors: 18, user_base_data: 814, base_vector: 14 [ 63.059171] cnss: Get IRQ number 428 for vector index 16 [ 63.059214] cnss: Assign MSI to user: DP, num_vectors: 18, user_base_data: 814, base_vector: 14 [ 63.059243] cnss: Get IRQ number 429 for vector index 17 [ 63.059280] cnss: Assign MSI to user: DP, num_vectors: 18, user_base_data: 814, base_vector: 14 [ 63.059318] cnss: Assign MSI to user: DP, num_vectors: 18, user_base_data: 814, base_vector: 14 [ 63.059346] cnss: Get IRQ number 431 for vector index 19 [ 63.059382] cnss: Assign MSI to user: DP, num_vectors: 18, user_base_data: 814, base_vector: 14 [ 63.059409] cnss: Get IRQ number 432 for vector index 20 [ 63.064040] INFO: trying to register non-static key. [ 63.069144] the code is fine but needs lockdep annotation. [ 63.074780] CPU: 6 PID: 8 Comm: kworker/u16:0 Tainted: G S W O 4.19.157+ #1 [ 63.074781] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 63.074790] Workqueue: events_unbound ion_system_secure_heap_prefetch_work [ 63.074792] Call trace: [ 63.074797] dump_backtrace+0x0/0x258 [ 63.074798] show_stack+0x20/0x30 [ 63.074802] dump_stack+0xd8/0x12c [ 63.074804] register_lock_class+0x4d0/0x5c8 [ 63.074806] __lock_acquire+0xbc/0x1e58 [ 63.074808] lock_acquire+0x1cc/0x218 [ 63.074811] _raw_spin_lock_irqsave+0x54/0x98 [ 63.074813] ion_system_secure_heap_prefetch_work+0x94/0x2c0 [ 63.074815] process_one_work+0x38c/0x660 [ 63.074818] worker_thread+0x268/0x4b8 [ 63.074820] kthread+0x140/0x150 [ 63.074822] ret_from_fork+0x10/0x1c [ 63.075108] bt_configure_gpios: BTON:Turn Bt On bt-reset-gpio(1121) value(1)\x0a [ 63.075118] bt_configure_gpios: BTON:Turn Bt On [ 63.075125] bt_configure_gpios: bt-sw-ctrl-gpio(1224) value(1) [ 63.075130] bt_configure_gpios: bt_gpio= 1121 on: 1 is successful [ 63.087975] INFO: trying to register non-static key. [ 63.093081] the code is fine but needs lockdep annotation. [ 63.098712] CPU: 5 PID: 8 Comm: kworker/u16:0 Tainted: G S W O 4.19.157+ #1 [ 63.098714] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 63.098725] Workqueue: events_unbound ion_system_secure_heap_prefetch_work [ 63.098727] Call trace: [ 63.098731] dump_backtrace+0x0/0x258 [ 63.098733] show_stack+0x20/0x30 [ 63.098737] dump_stack+0xd8/0x12c [ 63.098740] register_lock_class+0x4d0/0x5c8 [ 63.098741] __lock_acquire+0xbc/0x1e58 [ 63.098743] lock_acquire+0x1cc/0x218 [ 63.098746] _raw_spin_lock_irqsave+0x54/0x98 [ 63.098748] ion_system_secure_heap_prefetch_work+0x94/0x2c0 [ 63.098751] process_one_work+0x38c/0x660 [ 63.098753] worker_thread+0x268/0x4b8 [ 63.098755] kthread+0x140/0x150 [ 63.098757] ret_from_fork+0x10/0x1c [ 63.098879] [kworke][0x569b29db][18:03:21.210807] wlan: [274:E:HIF] hif_pci_ce_irq_set_affinity_hint: 3708: Unable to set cpu mask for offline CPU 0 [ 63.101059] msm_vidc: high: 00000001: ....e: Opening video instance: ffffffc956cc8000, 0 [ 63.108900] INFO: trying to register non-static key. [ 63.108902] the code is fine but needs lockdep annotation. [ 63.108906] CPU: 5 PID: 8 Comm: kworker/u16:0 Tainted: G S W O 4.19.157+ #1 [ 63.108907] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 63.108918] Workqueue: events_unbound ion_system_secure_heap_prefetch_work [ 63.108919] Call trace: [ 63.108924] dump_backtrace+0x0/0x258 [ 63.108925] show_stack+0x20/0x30 [ 63.108928] dump_stack+0xd8/0x12c [ 63.108931] register_lock_class+0x4d0/0x5c8 [ 63.108932] __lock_acquire+0xbc/0x1e58 [ 63.108933] lock_acquire+0x1cc/0x218 [ 63.108936] _raw_spin_lock_irqsave+0x54/0x98 [ 63.108938] ion_system_secure_heap_prefetch_work+0x94/0x2c0 [ 63.108941] process_one_work+0x38c/0x660 [ 63.108942] worker_thread+0x268/0x4b8 [ 63.108944] kthread+0x140/0x150 [ 63.108946] ret_from_fork+0x10/0x1c [ 63.118657] INFO: trying to register non-static key. [ 63.128496] the code is fine but needs lockdep annotation. [ 63.129407] [kworke][0x56a41c19][18:03:21.241342] wlan: [1636:I:WMA] wma_rx_service_ready_event: Firmware build version : 101a0521 [ 63.134133] CPU: 5 PID: 8 Comm: kworker/u16:0 Tainted: G S W O 4.19.157+ #1 [ 63.134134] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 63.134143] Workqueue: events_unbound ion_system_secure_heap_prefetch_work [ 63.134145] Call trace: [ 63.134149] dump_backtrace+0x0/0x258 [ 63.134150] show_stack+0x20/0x30 [ 63.134153] dump_stack+0xd8/0x12c [ 63.134156] register_lock_class+0x4d0/0x5c8 [ 63.134157] __lock_acquire+0xbc/0x1e58 [ 63.134159] lock_acquire+0x1cc/0x218 [ 63.134162] _raw_spin_lock_irqsave+0x54/0x98 [ 63.134164] ion_system_secure_heap_prefetch_work+0x94/0x2c0 [ 63.134167] process_one_work+0x38c/0x660 [ 63.134169] worker_thread+0x268/0x4b8 [ 63.134171] kthread+0x140/0x150 [ 63.134173] ret_from_fork+0x10/0x1c [ 63.134936] bt_ioctl: unified Current SOC Version : 400a0200 [ 63.142860] [kworke][0x56a80cf6][18:03:21.254794] wlan: [1636:I:WMA] wma_rx_service_ready_event: Board id: 0, Board version: 8 0 0 0 6 [ 63.145222] INFO: trying to register non-static key. [ 63.150327] the code is fine but needs lockdep annotation. [ 63.155959] CPU: 5 PID: 8 Comm: kworker/u16:0 Tainted: G S W O 4.19.157+ #1 [ 63.155961] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 63.155972] Workqueue: events_unbound ion_system_secure_heap_prefetch_work [ 63.155974] Call trace: [ 63.155978] dump_backtrace+0x0/0x258 [ 63.155980] show_stack+0x20/0x30 [ 63.155984] dump_stack+0xd8/0x12c [ 63.155987] register_lock_class+0x4d0/0x5c8 [ 63.155988] __lock_acquire+0xbc/0x1e58 [ 63.155990] lock_acquire+0x1cc/0x218 [ 63.155993] _raw_spin_lock_irqsave+0x54/0x98 [ 63.155995] ion_system_secure_heap_prefetch_work+0x94/0x2c0 [ 63.155998] process_one_work+0x38c/0x660 [ 63.156001] worker_thread+0x268/0x4b8 [ 63.156003] kthread+0x140/0x150 [ 63.156005] ret_from_fork+0x10/0x1c [ 63.158746] [kworke][0x56acb491][18:03:21.270682] wlan: [1636:I:WMA] wma_is_dbs_mandatory: 5417: MAC0 does not support both bands 2 DBS is mandatory [ 63.158857] [kworke][0x56acbd1c][18:03:21.270795] wlan: [1636:E:QDF] copy_fw_abi_version_tlv: 6979: copy_fw_abi_version_tlv: INIT_CMD version: 1, 0, 0x5f414351, 0x4c4d, 0x0, 0x0 [ 63.171355] INFO: trying to register non-static key. [ 63.180494] the code is fine but needs lockdep annotation. [ 63.186133] CPU: 5 PID: 8 Comm: kworker/u16:0 Tainted: G S W O 4.19.157+ #1 [ 63.186135] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 63.186146] Workqueue: events_unbound ion_system_secure_heap_prefetch_work [ 63.186148] Call trace: [ 63.186153] dump_backtrace+0x0/0x258 [ 63.186155] show_stack+0x20/0x30 [ 63.186159] dump_stack+0xd8/0x12c [ 63.186161] register_lock_class+0x4d0/0x5c8 [ 63.186163] __lock_acquire+0xbc/0x1e58 [ 63.186165] lock_acquire+0x1cc/0x218 [ 63.186168] _raw_spin_lock_irqsave+0x54/0x98 [ 63.186170] ion_system_secure_heap_prefetch_work+0x94/0x2c0 [ 63.186174] process_one_work+0x38c/0x660 [ 63.186176] worker_thread+0x268/0x4b8 [ 63.186179] kthread+0x140/0x150 [ 63.186181] ret_from_fork+0x10/0x1c [ 63.196811] msm_vidc: high: 00000001: h264e: Closed video instance: ffffffc956cc8000 [ 63.196995] INFO: trying to register non-static key. [ 63.202104] the code is fine but needs lockdep annotation. [ 63.207741] CPU: 5 PID: 8 Comm: kworker/u16:0 Tainted: G S W O 4.19.157+ #1 [ 63.207743] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 63.207755] Workqueue: events_unbound ion_system_secure_heap_prefetch_work [ 63.207757] Call trace: [ 63.207762] dump_backtrace+0x0/0x258 [ 63.207764] show_stack+0x20/0x30 [ 63.207768] dump_stack+0xd8/0x12c [ 63.207772] register_lock_class+0x4d0/0x5c8 [ 63.207774] __lock_acquire+0xbc/0x1e58 [ 63.207776] lock_acquire+0x1cc/0x218 [ 63.207780] _raw_spin_lock_irqsave+0x54/0x98 [ 63.207783] ion_system_secure_heap_prefetch_work+0x94/0x2c0 [ 63.207787] process_one_work+0x38c/0x660 [ 63.207789] worker_thread+0x268/0x4b8 [ 63.207791] kthread+0x140/0x150 [ 63.207794] ret_from_fork+0x10/0x1c [ 63.218224] INFO: trying to register non-static key. [ 63.223325] the code is fine but needs lockdep annotation. [ 63.228966] CPU: 5 PID: 8 Comm: kworker/u16:0 Tainted: G S W O 4.19.157+ #1 [ 63.228967] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 63.228977] Workqueue: events_unbound ion_system_secure_heap_prefetch_work [ 63.228979] Call trace: [ 63.228984] dump_backtrace+0x0/0x258 [ 63.228986] show_stack+0x20/0x30 [ 63.228989] dump_stack+0xd8/0x12c [ 63.228992] register_lock_class+0x4d0/0x5c8 [ 63.228994] __lock_acquire+0xbc/0x1e58 [ 63.228996] lock_acquire+0x1cc/0x218 [ 63.228999] _raw_spin_lock_irqsave+0x54/0x98 [ 63.229001] ion_system_secure_heap_prefetch_work+0x94/0x2c0 [ 63.229004] process_one_work+0x38c/0x660 [ 63.229006] worker_thread+0x268/0x4b8 [ 63.229008] kthread+0x140/0x150 [ 63.229011] ret_from_fork+0x10/0x1c [ 63.229088] INFO: trying to register non-static key. [ 63.234184] the code is fine but needs lockdep annotation. [ 63.239816] CPU: 5 PID: 8 Comm: kworker/u16:0 Tainted: G S W O 4.19.157+ #1 [ 63.239817] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 63.239823] Workqueue: events_unbound ion_system_secure_heap_prefetch_work [ 63.239826] Call trace: [ 63.239829] dump_backtrace+0x0/0x258 [ 63.239831] show_stack+0x20/0x30 [ 63.239834] dump_stack+0xd8/0x12c [ 63.239836] register_lock_class+0x4d0/0x5c8 [ 63.239838] __lock_acquire+0xbc/0x1e58 [ 63.239840] lock_acquire+0x1cc/0x218 [ 63.239843] _raw_spin_lock_irqsave+0x54/0x98 [ 63.239846] ion_system_secure_heap_prefetch_work+0x48/0x2c0 [ 63.239848] process_one_work+0x38c/0x660 [ 63.239851] worker_thread+0x33c/0x4b8 [ 63.239853] kthread+0x140/0x150 [ 63.239855] ret_from_fork+0x10/0x1c [ 63.357547] binder: 2508:2508 ioctl 40046210 7fc826c6b4 returned -22 [ 63.396531] [kworke][0x56f2593a][18:03:21.508397] wlan: [1628:E:QDF] ready_extract_init_status_tlv: 8884: ready_extract_init_status_tlv:0 [ 63.410463] [kworke][0x56f67356][18:03:21.522399] wlan: [1628:E:QDF] cds_get_context: 1486: Module ID 65 context is Null [ 63.414233] msm_vidc: high: 00000001: ....e: Opening video instance: ffffffc956c84000, 0 [ 63.421884] [kworke][0x56f9cbbc][18:03:21.533818] wlan: [1628:F:DP] cdp_ipa_set_uc_tx_partition_base invalid instance [ 63.434154] [kworke][0x56fd6447][18:03:21.546091] wlan: [1628:I:WMA] wma_he_update_tgt_services: 996: 11ax is enabled [ 63.445625] [kworke][0x5700c01d][18:03:21.557556] wlan: [1628:I:HIF] Initializing Runtime PM wakelock &mgmt_txrx_pdev_ctx->wakelock_tx_runtime_cmp [ 63.447813] [kworke][0x570164b3][18:03:21.559750] wlan: [1628:I:dfs] WLAN_DEBUG_DFS_ALWAYS : wlan_dfs_pdev_obj_create_notification: 421: dfs_offload 1 [ 63.447852] [kworke][0x570167a7][18:03:21.559789] wlan: [1628:I:SPECTRAL] null_get_capability: 1715: SPECTRAL : get_capability not registered\x0a [ 63.447862] [kworke][0x57016870][18:03:21.559800] wlan: [1628:I:SPECTRAL] target_if_pdev_spectral_init: 2249: HAL_CAP_PHYDIAG : Capable [ 63.447872] [kworke][0x57016935][18:03:21.559810] wlan: [1628:I:SPECTRAL] null_get_capability: 1715: SPECTRAL : get_capability not registered\x0a [ 63.447882] [kworke][0x570169ee][18:03:21.559820] wlan: [1628:I:SPECTRAL] target_if_pdev_spectral_init: 2253: HAL_CAP_RADAR : Capable [ 63.447891] [kworke][0x57016aa3][18:03:21.559829] wlan: [1628:I:SPECTRAL] null_get_capability: 1715: SPECTRAL : get_capability not registered\x0a [ 63.447900] [kworke][0x57016b53][18:03:21.559839] wlan: [1628:I:SPECTRAL] target_if_pdev_spectral_init: 2258: HAL_CAP_SPECTRAL_SCAN : Capable [ 63.447914] [kworke][0x57016c5c][18:03:21.559852] wlan: [1628:I:SPECTRAL] null_get_tsf64: 1703: SPECTRAL : get_tsf64 not registered\x0a [ 63.447945] [kworke][0x57016ea5][18:03:21.559883] wlan: [1628:I:GREEN_AP] wlan_green_ap_pdev_obj_create_notification: 106: Green AP creation successful, green ap ctx: ffffffc8da2de8e8, pdev: ffffffc96304d0e8 [ 63.448012] [kworke][0x570173b4][18:03:21.559950] wlan: [1628:I:IPA] wlan_ipa_wdi_init: 540: ipa_over_gsi: 1, is_smmu_enabled: 1 [ 63.451753] [kworke][0x57028c34][18:03:21.563690] wlan: [1628:I:REGULATORY] reg_set_band: 483: set band bitmap: 3 [ 63.452022] [kworke][0x5702a071][18:03:21.563960] wlan: [1628:I:HIF] Initializing Runtime PM wakelock &ctx->dfs [ 63.452039] [kworke][0x5702a1bf][18:03:21.563977] wlan: [1628:I:HIF] Initializing Runtime PM wakelock &ctx->connect [ 63.452056] [kworke][0x5702a2ee][18:03:21.563993] wlan: [1628:I:HIF] Initializing Runtime PM wakelock &ctx->user [ 63.452074] [kworke][0x5702a45d][18:03:21.564012] wlan: [1628:I:HIF] Initializing Runtime PM wakelock &scan_priv->runtime_pm_lock [ 63.452106] [kworke][0x5702a6c3][18:03:21.564044] wlan: [1628:I:GREEN_AP] target_if_green_ap_register_egap_event_handler: 131: Set the Enhance Green AP event handler [ 63.452121] [kworke][0x5702a7df][18:03:21.564059] wlan: [1628:E:QDF] dp_peer_map_attach_wifi3: 10048: dp_peer_map_attach_wifi3 max_peers 55, max_ast_index: 144\x0a [ 63.460703] msm_vidc: high: 00000001: h265e: Closed video instance: ffffffc956c84000 [ 63.468630] [kworke][0x57077da7][18:03:21.580564] wlan: [1628:I:DP] \x0a<=== cfg max peer id 55 ====> [ 63.468666] [kworke][0x570780a5][18:03:21.580603] wlan: [1628:I:DP] \x0a<=== cfg max ast idx 144 ====> [ 63.468686] [kworke][0x57078231][18:03:21.580623] wlan: [1628:I:DP] ast hash_elems: 512, max_ast_idx: 144 [ 63.470985] [kworke][0x57082cd4][18:03:21.582902] wlan: [274:I:WMA] wma_wait_for_ready_event: 6926: FW ready event received [ 63.495593] [kworke][0x570f6404][18:03:21.607528] wlan: [274:E:WMI] send_action_oui_cmd_tlv: 220: Invalid action id [ 63.507227] [kworke][0x5712cc0f][18:03:21.619157] wlan: [274:E:action_oui] ucfg_action_oui_send: 160: Failed to send: 7 [ 63.518860] [kworke][0x5716350a][18:03:21.630795] wlan: [274:E:WMI] send_action_oui_cmd_tlv: 220: Invalid action id [ 63.529968] [kworke][0x571975d3][18:03:21.641899] wlan: [274:E:action_oui] ucfg_action_oui_send: 160: Failed to send: 9 [ 63.531382] msm_vidc: high: 00000001: ....e: Opening video instance: ffffffc8d66cc000, 0 [ 63.542574] [kworke][0x571d2778][18:03:21.654508] wlan: [274:E:HDD] hdd_action_oui_send: 13281: Failed to send one or all action_ouis [ 63.560554] init: starting service 'qvrd_vndr'... [ 63.562308] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 63.563063] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 63.565179] msm_vidc: high: 00000001: h265e: Closed video instance: ffffffc8d66cc000 [ 63.578676] cnss: dma-coherent is enabled [ 63.578686] cnss: IOMMU map: iova b0000000, len 4096 [ 63.578695] cnss: IOMMU map: iova_addr b0000040 [ 63.578703] cnss: dma-coherent is enabled [ 63.578709] cnss: IOMMU map: iova b0001000, len 4096 [ 63.578716] cnss: IOMMU map: iova_addr b0001018 [ 63.582365] [kworke][0x5728d01a][18:03:21.694302] wlan: [274:E:TXRX] dp_rxdma_ring_config: 5022: DBS enabled max_mac_rings 2 [ 63.594410] [kworke][0x572c5715][18:03:21.706343] wlan: [274:E:TXRX] dp_rxdma_ring_config: 5033: pdev_id 0 max_mac_rings 2 [ 63.605829] init: starting service 'sxrd'... [ 63.607263] [kworke][0x57301a4f][18:03:21.719187] wlan: [274:E:TXRX] dp_rxdma_ring_config: 5050: mac_id 0 [ 63.618464] [kworke][0x573362c4][18:03:21.730392] wlan: [274:E:TXRX] dp_rxdma_ring_config: 5050: mac_id 1 [ 63.629430] [kworke][0x573699dd][18:03:21.741366] wlan: [274:I:POLICY_MGR] policy_mgr_update_5g_scc_prefer: 398: overwrite pm_second_connection_pcl_dbs_2x2_table, index 2 mode 3 system prefer 0 new pcl 6 [ 63.629440] [kworke][0x57369ad9][18:03:21.741379] wlan: [274:I:POLICY_MGR] policy_mgr_update_5g_scc_prefer: 404: overwrite pm_second_connection_pcl_dbs_2x2_table, index 3 mode 3 system prefer 0 new pcl 6 [ 63.630192] [kworke][0x5736d338][18:03:21.742130] wlan: [274:E:REGULATORY] reg_freq_width_to_chan_op_class: 512: no op class for frequency 5745 [ 63.632754] init: Control message: Could not find 'vendor.qti.hardware.iop@2.0::IIop/default' for ctl.interface_start from pid: 517 (/system/bin/hwservicemanager) [ 63.644047] [kworke][0x573ae254][18:03:21.755985] wlan: [274:I:HIF] hif_pm_runtime_start: Enabling RUNTIME PM, Delay: 500 ms [ 63.675064] cnss_utils: WLAN MAC address is not set, type 0 [ 63.676682] init: Service 'qvrd_vndr' (pid 2553) exited with status 1 [ 63.681006] cnss_pci 0000:01:00.0: Falling back to syfs fallback for: wlan/qca_cld/qca6390/wlan_mac.bin [ 63.681300] init: Sending signal 9 to service 'qvrd_vndr' (pid 2553) process group... [ 63.681588] libprocessgroup: Successfully killed process cgroup uid 1000 pid 2553 in 0ms [ 63.688579] mv2112_read_status [ 63.688823] mv2112_update_link: 3.0x901(1G): 0x80 [ 63.689056] mv2112_update_link: 3.0x8109(100M): 0x0 [ 63.689073] mv2112_update_link: link 0x0 [ 63.689090] mv2112_read_status: autoneg is disabled [ 63.695277] init: Service 'sxrd' (pid 2558) exited with status 1 [ 63.695365] init: Sending signal 9 to service 'sxrd' (pid 2558) process group... [ 63.698824] [kworke][0x574aee68][18:03:21.810759] wlan: [274:I:HDD] hdd_initialize_mac_address: 12589: using default MAC address [ 63.720845] logd: Skipping entries from slow reader, pid 1262, fd 14, from LogBuffer::Prune() [ 63.721534] logd: Skipping entries from slow reader, pid 1262, fd 14, from LogBuffer::Prune() [ 63.744133] [kworke][0x575830d3][18:03:21.856020] wlan: [274:E:QDF] qdf_mutex_create: already initialized lock [ 63.755154] [kworke][0x575b6e93][18:03:21.867083] wlan: [274:E:HDD] hdd_open_adapter: 6512: Interface p2p0 wow debug_fs init failed [ 63.774558] msm_vidc: high: 00000001: ....e: Opening video instance: ffffffc8d4acc000, 0 [ 63.776077] msm_vidc: err : 00000001: ....e: msm_vidc_comm_update_ctrl: failed: control name Ltr Count, min 0, max 0, step 0, default_value 0 [ 63.793295] [kworke][0x57669b8f][18:03:21.905228] wlan: [274:E:QDF] qdf_mutex_create: already initialized lock [ 63.803674] [kworke][0x5769a646][18:03:21.915611] wlan: [274:E:HDD] hdd_open_adapter: 6512: Interface wifi-aware0 wow debug_fs init failed [ 63.808182] msm_vidc: high: 00000001: vp8e: Closed video instance: ffffffc8d4acc000 [ 63.822770] ------------[ cut here ]------------ [ 63.822779] IRQs not enabled as expected [ 63.822795] WARNING: CPU: 6 PID: 274 at kernel/softirq.c:161 __local_bh_enable_ip+0x140/0x158 [ 63.822798] Modules linked in: wlan(O) machine_dlkm(O) wcd938x_slave_dlkm(O) wcd938x_dlkm(O) wcd9xxx_dlkm(O) mbhc_dlkm(O) tx_macro_dlkm(O) rx_macro_dlkm(O) va_macro_dlkm(O) wsa_macro_dlkm(O) swr_ctrl_dlkm(O) bolero_cdc_dlkm(O) wsa881x_dlkm(O) wcd_core_dlkm(O) stub_dlkm(O) hdmi_dlkm(O) swr_dlkm(O) pinctrl_lpi_dlkm(O) pinctrl_wcd_dlkm(O) usf_dlkm(O) native_dlkm(O) platform_dlkm(O) q6_dlkm(O) adsp_loader_dlkm(O) apr_dlkm(O) snd_event_dlkm(O) q6_notifier_dlkm(O) q6_pdr_dlkm(O) msm_11ad_proxy [ 63.822828] CPU: 6 PID: 274 Comm: kworker/u16:3 Tainted: G S W O 4.19.157+ #1 [ 63.822831] Hardware name: Qualcomm Technologies, Inc. kona MTP-RmPM8150b (DT) [ 63.822839] Workqueue: cnss_driver_event cnss_driver_event_work [ 63.822843] pstate: 60c00085 (nZCv daIf +PAN +UAO) [ 63.822852] pc : __local_bh_enable_ip+0x140/0x158 [ 63.822856] lr : __local_bh_enable_ip+0x140/0x158 [ 63.822861] sp : ffffff801a20bb60 [ 63.822864] x29: ffffff801a20bb60 x28: dead000000000100 [ 63.822871] x27: ffffffa50bf82fbc x26: ffffffc947a78670 [ 63.822877] x25: ffffffc8e335c380 x24: 000000000000003f [ 63.822884] x23: ffffff801b60310c x22: 000000004000003f [ 63.822888] x21: ffffffc949375d40 x20: ffffffa50a6f72e0 [ 63.822894] x19: 0000000000000201 x18: 000000000000002c [ 63.822903] x17: ffffffa50d8f4000 x16: 00000000fff6c3e0 [ 63.822907] x15: 000000000006c3e0 x14: 00000000000000c2 [ 63.822913] x13: 0000000000000000 x12: 00000000000000e0 [ 63.822918] x11: 0000000000000000 x10: 0000000000000000 [ 63.822925] x9 : 450514ed24766500 x8 : 450514ed24766500 [ 63.822929] x7 : ffffffa509d82700 x6 : 0000000000000000 [ 63.822934] x5 : 0000000000000080 x4 : 0000000000000001 [ 63.822938] x3 : 0000000000000000 x2 : 0000000000000004 [ 63.822945] x1 : 0000000000000004 x0 : 000000000000001c [ 63.822952] Call trace: [ 63.822956] __local_bh_enable_ip+0x140/0x158 [ 63.822963] _raw_spin_unlock_bh+0x3c/0x48 [ 63.822969] cnss_pci_reg_write+0xf0/0x1a8 [ 63.822975] cnss_pci_time_sync_work_hdlr+0x24c/0x6a8 [ 63.822979] cnss_pci_call_driver_probe+0x138/0x2d0 [ 63.822984] cnss_bus_call_driver_probe+0x28/0x80 [ 63.822989] cnss_driver_event_work+0x2e8/0xcb8 [ 63.822994] process_one_work+0x38c/0x660 [ 63.823000] worker_thread+0x268/0x4b8 [ 63.823005] kthread+0x140/0x150 [ 63.823010] ret_from_fork+0x10/0x1c [ 63.823014] irq event stamp: 559405 [ 63.823018] hardirqs last enabled at (559403): [] el1_irq+0x108/0x198 [ 63.823024] hardirqs last disabled at (559404): [] _raw_spin_lock_irqsave+0x28/0x98 [ 63.823031] softirqs last enabled at (559392): [] mhi_device_get_sync_atomic+0x68/0x2d8 [ 63.823037] softirqs last disabled at (559405): [] cnss_pci_reg_write+0x58/0x1a8 [ 63.823040] ---[ end trace 1d70a345b84a871c ]--- [ 63.823250] cnss: Host time = 76401900 us, device time = 4010790 us, offset = 72391110 us [ 63.823295] cnss: Updated time sync regs [0x984] = 0x45099c6, [0x988] = 0x0 [ 63.823332] cnss: Removing vote for Regulator vdd-wlan-rfa2 [ 63.823349] cnss: Removing vote for Regulator vdd-wlan-rfa1 [ 63.823361] cnss: Removing vote for Regulator vdd-wlan-dig [ 63.823372] cnss: Removing vote for Regulator vdd-wlan-aon [ 63.823384] cnss: Removing vote for Regulator vdd-wlan-io [ 63.823439] cnss: PM relax, state: 0x107, count: 0 [ 63.841972] Wifi Turning On from UI [ 63.851505] [wifi@1][0x5777a97a][18:03:21.963441] wlan: [972:I:DP] dp_vdev_attach_wifi3: wlan_cfg_ap_bridge_enabled 0 [ 63.851581] [wifi@1][0x5777af53][18:03:21.963518] wlan: [972:I:DP] 00000000: 2d 4d 88 dd 84 75 6c b2 56 b6 70 4a c5 fb ba 68 [ 63.851591] [wifi@1][0x5777b017][18:03:21.963529] wlan: [972:I:DP] 00000010: aa 76 1f 90 [ 63.851634] [wifi@1][0x5777b355][18:03:21.963572] wlan: [972:I:DP] 00000000: c3 28 b9 98 85 b6 32 95 18 99 81 00 0d e3 5d 84 [ 63.851643] [wifi@1][0x5777b412][18:03:21.963582] wlan: [972:I:DP] 00000010: 36 95 81 52 be 74 0e 25 f6 7f e4 cd ab c8 4f 94 [ 63.851652] [wifi@1][0x5777b4c1][18:03:21.963591] wlan: [972:I:DP] 00000020: 87 61 46 27 b0 69 40 68 39 e7 9c 31 [ 63.868822] binder: 1954:2170 ioctl 40046210 79db0c21f4 returned -22 [ 63.879362] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 63.897762] [lowi-s][0x57853607][18:03:22.009689] wlan: [1535:I:wifipos] wifi_pos_get_ch_info: 461: num channels: 26 [ 63.912443] [wifi@1][0x57898290][18:03:22.024363] wlan: [2575:E:wifipos] wifi_pos_process_app_reg_req: 608: Received App Req Req pid(616563660), len(16) [ 63.933575] [wifi@1][0x578fb44e][18:03:22.045506] wlan: [2575:I:wifipos] wifi_pos_get_ch_info: 461: num channels: 26 [ 63.935278] [wifi@1][0x57903481][18:03:22.047214] wlan: [2575:I:wifipos] wifi_pos_get_ch_info: 461: num channels: 26 [ 64.233495] i2c_geni 980000.i2c: i2c error :-107 [ 64.240558] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 64.251555] i2c_geni 980000.i2c: i2c error :-107 [ 64.256506] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 64.299418] bt_ioctl: BT_CMD_PWR_CTRL pwr_cntrl:2 [ 64.304395] bt_vreg_unvote: vreg_unvote successful for : qca,bt-vdd-rfa2 [ 64.311724] bt_vreg_unvote: vreg_unvote successful for : qca,bt-vdd-rfa1 [ 64.318729] bt_vreg_unvote: vreg_unvote successful for : qca,bt-vdd-dig [ 64.325630] bt_vreg_unvote: vreg_unvote successful for : qca,bt-vdd-aon [ 64.613233] [schedu][0x5856d327][18:03:22.725169] wlan: [2204:I:HIF] Deinitializing Runtime PM wakelock &vdev->vdev_set_key_runtime_wakelock [ 64.617036] [schedu][0x5857f016][18:03:22.728969] wlan: [2204:I:HIF] Initializing Runtime PM wakelock &vdev->vdev_set_key_runtime_wakelock [ 64.638840] [wifi@1][0x585e53ad][18:03:22.750776] wlan: [972:I:DP] dp_vdev_attach_wifi3: wlan_cfg_ap_bridge_enabled 0 [ 64.673851] [wifi@1][0x586894aa][18:03:22.785778] wlan: [2575:E:wifipos] wifi_pos_process_app_reg_req: 608: Received App Req Req pid(616563660), len(16) [ 64.674092] binder: undelivered transaction 21847, process died. [ 64.691453] [wifi@1][0x586dbce4][18:03:22.803381] wlan: [2575:I:wifipos] wifi_pos_get_ch_info: 461: num channels: 26 [ 64.693372] [wifi@1][0x586e4cf7][18:03:22.805302] wlan: [2575:I:wifipos] wifi_pos_get_ch_info: 461: num channels: 26 [ 64.712418] mv2112_read_status [ 64.712724] mv2112_update_link: 3.0x901(1G): 0x80 [ 64.713028] mv2112_update_link: 3.0x8109(100M): 0x0 [ 64.713045] mv2112_update_link: link 0x0 [ 64.713062] mv2112_read_status: autoneg is disabled [ 64.862050] [wifi@1][0x589fb867][18:03:22.973986] wlan: [972:I:DP] dp_vdev_attach_wifi3: wlan_cfg_ap_bridge_enabled 1 [ 64.862562] [wifi@1][0x589fdefb][18:03:22.974500] wlan: [972:E:PMO] pmo_register_wow_wakeup_events: 88: Skipping wake event configuration for vdev_opmode 16 [ 64.877946] [wifi@1][0x58a460a5][18:03:22.989883] wlan: [972:E:SME] sme_get_nss_chain_shift: 4045: Device mode 16 invalid [ 64.889387] [wifi@1][0x58a7b9fe][18:03:23.001316] wlan: [972:E:SME] sme_get_nss_chain_shift: 4045: Device mode 16 invalid [ 64.905291] IPv6: ADDRCONF(NETDEV_UP): wifi-aware0: link is not ready [ 64.936781] qbt:qbt_open: entry minor_no=0 fd_available=1 [ 64.936790] qbt:qbt_open: exit : 0 fd_available=0 [ 64.946105] qbt:qbt_open: entry minor_no=1 fd_available=0 [ 64.946113] qbt:qbt_open: exit : 0 fd_available=0 [ 64.946262] qbt:qbt_ioctl: cmd received 107 [ 64.948045] qbt:qbt_ioctl: Acquiring wakelock [ 64.976107] Boot completed [ 65.098495] [schedu][0x58e4fd03][18:03:23.210422] wlan: [2204:I:HIF] Deinitializing Runtime PM wakelock &vdev->vdev_set_key_runtime_wakelock [ 65.102277] [schedu][0x58e6184b][18:03:23.214200] wlan: [2204:I:HIF] Initializing Runtime PM wakelock &vdev->vdev_set_key_runtime_wakelock [ 65.112607] QSEECOM: qseecom_load_app: App (fingerpr) does'nt exist, loading apps for first time [ 65.237519] QSEECOM: qseecom_load_app: App with id 7 (fingerpr) now loaded [ 65.303781] [schedu][0x59212221][18:03:23.415716] wlan: [2204:I:OSIF] scan start scan id 40961 [ 65.322979] binder: 2681:2681 ioctl 40046210 7fc826c6b4 returned -22 [ 65.351221] logd: Skipping entries from slow reader, pid 1262, fd 14, from LogBuffer::Prune() [ 65.628818] QSEECOM: __qseecom_unload_app: App (7) is unloaded [ 65.631409] qbt:qbt_release: entry minor_no=0 fd_available=0 [ 65.631429] qbt:qbt_release: Releasing wakelock [ 65.631454] qbt:qbt_release: exit : fd_available=1 [ 65.631510] qbt:qbt_release: entry minor_no=1 fd_available=1 [ 65.631527] qbt:qbt_release: exit : fd_available=1 [ 65.698347] qbt:qbt_open: entry minor_no=0 fd_available=1 [ 65.698358] qbt:qbt_open: exit : 0 fd_available=0 [ 65.698444] qbt:qbt_open: entry minor_no=1 fd_available=0 [ 65.698451] qbt:qbt_open: exit : 0 fd_available=0 [ 65.698499] qbt:qbt_ioctl: cmd received 107 [ 65.698507] qbt:qbt_ioctl: Acquiring wakelock [ 65.718122] logd: Skipping entries from slow reader, pid 1262, fd 14, from LogBuffer::Prune() [ 65.736480] mv2112_read_status [ 65.736722] mv2112_update_link: 3.0x901(1G): 0x80 [ 65.736952] mv2112_update_link: 3.0x8109(100M): 0x0 [ 65.736969] mv2112_update_link: link 0x0 [ 65.736986] mv2112_read_status: autoneg is disabled [ 65.789684] QSEECOM: qseecom_load_app: App (fingerpr) does'nt exist, loading apps for first time [ 65.917336] QSEECOM: qseecom_load_app: App with id 8 (fingerpr) now loaded [ 66.143278] QSEECOM: __qseecom_unload_app: App (8) is unloaded [ 66.147957] qbt:qbt_release: entry minor_no=0 fd_available=0 [ 66.147966] qbt:qbt_release: Releasing wakelock [ 66.147976] qbt:qbt_release: exit : fd_available=1 [ 66.148000] qbt:qbt_release: entry minor_no=1 fd_available=1 [ 66.148008] qbt:qbt_release: exit : fd_available=1 [ 66.180604] qbt:qbt_open: entry minor_no=0 fd_available=1 [ 66.180614] qbt:qbt_open: exit : 0 fd_available=0 [ 66.180690] qbt:qbt_open: entry minor_no=1 fd_available=0 [ 66.180697] qbt:qbt_open: exit : 0 fd_available=0 [ 66.180744] qbt:qbt_ioctl: cmd received 107 [ 66.180751] qbt:qbt_ioctl: Acquiring wakelock [ 66.229481] sdcardfs version 2.0 [ 66.229500] sdcardfs: dev_name -> /data/media [ 66.229507] sdcardfs: options -> fsuid=1023,fsgid=1023,multiuser,derive_gid,default_normal,unshared_obb,mask=6,userid=0,gid=1015 [ 66.229514] sdcardfs: mnt -> ffffffc8cda5d460 [ 66.230509] sdcardfs: mounted on top of /data/media type f2fs [ 66.233619] Remount options were mask=23,gid=9997 for vfsmnt ffffffc95d386960. [ 66.233670] sdcardfs : options - debug:1 [ 66.233677] sdcardfs : options - gid:9997 [ 66.233684] sdcardfs : options - mask:23 [ 66.235299] Remount options were mask=7,gid=9997 for vfsmnt ffffffc95d380e60. [ 66.235339] sdcardfs : options - debug:1 [ 66.235346] sdcardfs : options - gid:9997 [ 66.235353] sdcardfs : options - mask:7 [ 66.237468] Remount options were mask=7,gid=9997 for vfsmnt ffffffc8d8f665e0. [ 66.237503] sdcardfs : options - debug:1 [ 66.237511] sdcardfs : options - gid:9997 [ 66.237517] sdcardfs : options - mask:7 [ 66.239595] QSEECOM: qseecom_load_app: App (fingerpr) does'nt exist, loading apps for first time [ 66.285246] perfetto: disabled ftrace [ 66.290953] i2c_geni 980000.i2c: i2c error :-107 [ 66.302942] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 66.318328] i2c_geni 980000.i2c: i2c error :-107 [ 66.324081] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 66.324133] binder: 2766:2766 ioctl 40046210 7fc826c6b4 returned -22 [ 66.342652] binder: 2709:2709 ioctl 40046210 7fc826c6b4 returned -22 [ 66.428381] QSEECOM: qseecom_load_app: App with id 9 (fingerpr) now loaded [ 66.493957] binder: undelivered TRANSACTION_COMPLETE [ 66.493974] binder: undelivered transaction 28763, process died. [ 66.538710] display_panel_avdd: disabling [ 66.551321] vdd_tof: disabling [ 66.634825] binder: 2819:2819 ioctl 40046210 7fc826c6b4 returned -22 [ 66.672604] binder: 2820:2820 ioctl 40046210 7fdd9880e4 returned -22 [ 66.705231] bimc-bwmon: Zone thres larger than hw limit: hi:72090 med:19661 lo:0 [ 66.728218] [schedu][0x5ac26b31][18:03:24.840053] wlan: [2204:I:OSIF] vdev 0, scan id 40961 type COMPLETED(1) reason COMPLETED(1) scan found 49 bss [ 66.761951] mv2112_read_status [ 66.766751] mv2112_update_link: 3.0x901(1G): 0x80 [ 66.766993] mv2112_update_link: 3.0x8109(100M): 0x0 [ 66.767011] mv2112_update_link: link 0x0 [ 66.767029] mv2112_read_status: autoneg is disabled [ 66.786849] logd: Skipping entries from slow reader, pid 1262, fd 14, from LogBuffer::Prune() [ 66.865911] QSEECOM: __qseecom_unload_app: App (9) is unloaded [ 66.873881] qbt:qbt_release: entry minor_no=0 fd_available=0 [ 66.873904] qbt:qbt_release: Releasing wakelock [ 66.873930] qbt:qbt_release: exit : fd_available=1 [ 66.873987] qbt:qbt_release: entry minor_no=1 fd_available=1 [ 66.874003] qbt:qbt_release: exit : fd_available=1 [ 66.945344] devfreq-qcom-fw 18590000.qcom,devfreq-l3:qcom,cdsp-cdsp-l3-lat: Successfully started CDSP L3 governor [ 67.007617] binder: 2856:2856 ioctl 40046210 7fc826c6b4 returned -22 [ 67.276709] binder: 2878:2878 ioctl 40046210 7fc826c6b4 returned -22 [ 67.346311] [schedu][0x5b7787b3][18:03:25.458243] wlan: [2204:I:HIF] Deinitializing Runtime PM wakelock &vdev->vdev_set_key_runtime_wakelock [ 67.347876] [schedu][0x5b77fd4a][18:03:25.459811] wlan: [2204:I:HIF] Initializing Runtime PM wakelock &vdev->vdev_set_key_runtime_wakelock [ 67.358824] binder: 2438:2879 ioctl 40046210 79dd251254 returned -22 [ 67.363173] [wifi@1][0x5b7c7877][18:03:25.475107] wlan: [972:I:DP] dp_vdev_attach_wifi3: wlan_cfg_ap_bridge_enabled 0 [ 67.418378] binder: 2856:2856 ioctl 40046210 7fc826b5a4 returned -22 [ 67.459167] [wifi@1][0x5b989813][18:03:25.571102] wlan: [2575:E:wifipos] wifi_pos_process_app_reg_req: 608: Received App Req Req pid(616563660), len(16) [ 67.525639] binder: 2911:2911 ioctl 40046210 7fc826c6b4 returned -22 [ 67.530902] [wifi@1][0x5bad9c11][18:03:25.642835] wlan: [2575:I:wifipos] wifi_pos_get_ch_info: 461: num channels: 26 [ 67.534390] [wifi@1][0x5baea1b9][18:03:25.646324] wlan: [2575:I:wifipos] wifi_pos_get_ch_info: 461: num channels: 26 [ 67.639735] [wpa_su][0x5bcd7dd8][18:03:25.751659] wlan: [2584:I:SME] vdev-0: Connecting to TP-LINK_5G_9319 b6:2a:7d:83:93:1c rssi: -27 freq: 5180 akm 9 cipher: uc 6 mc 6, CC: [ 67.639892] [wpa_su][0x5bcd8aaf][18:03:25.751830] wlan: [2584:E:QDF] qdf_mem_malloc_debug: 1206: Cannot malloc 0 bytes @ csr_get_cfg_max_tx_power:14199 [ 67.675342] [schedu][0x5bd7ed1d][18:03:25.787276] wlan: [2204:I:WMI] send_vdev_start_cmd_tlv: 1062: send_vdev_start_cmd_tlv: vdev_id 0 freq 5180 chanmode 18 ch_info: 0x12 is_dfs 0 beacon interval 100 dtim 0 center_chan 5210 center_freq2 0 reg_info_1: 0x170000 reg_info_2: 0x1700, req->max_txpow: 0x17 Tx SS 1, Rx SS 1, ldpc_rx: 0, cac 0, regd 4, HE ops: 0req->dis_hw_ack: 0 [ 67.686955] [soft_i][0x5bdb5411][18:03:25.798888] wlan: [0:I:TXRX] HTT_T2H_MSG_TYPE_PEER_MAP msg for peer id 8 vdev id 0 n [ 67.686989] [soft_i][0x5bdb5702][18:03:25.798928] wlan: [0:E:DP] dp_peer_find_add_id: peer ffffffc947a50000 ID 8 vid 0 mac b6:2a:7d:83:93:1c [ 67.700061] [soft_i][0x5bdf2b65][18:03:25.811999] wlan: [0:I:DP] dp_peer_find_add_id: ref_cnt: 2 [ 67.700073] [soft_i][0x5bdf2c69][18:03:25.812013] wlan: [0:E:DP] dp_peer_map_ast: peer ffffffc947a50000 ID 85 vid 0 mac b6:2a:7d:83:93:1c [ 67.784451] mv2112_read_status [ 67.784695] mv2112_update_link: 3.0x901(1G): 0x80 [ 67.784927] mv2112_update_link: 3.0x8109(100M): 0x0 [ 67.784944] mv2112_update_link: link 0x0 [ 67.784961] mv2112_read_status: autoneg is disabled [ 67.810011] binder: 2979:2979 ioctl 40046210 7fc826c6b4 returned -22 [ 67.834129] [schedu][0x5c067247][18:03:25.946064] wlan: [2204:I:PE] Auth TX: seq 1 seq num 2049 status 0 WEP 0 to b6:2a:7d:83:93:1c [ 67.835892] [schedu][0x5c06f6a7][18:03:25.947829] wlan: [2204:I:PE] Auth TX: success [ 67.839958] [schedu][0x5c08275c][18:03:25.951892] wlan: [2204:I:PE] Auth RX: vdev 0 sys role 3 lim_state 5 from b6:2a:7d:83:93:1c rssi -25 auth_alg 0 seq 2825 [ 67.840555] [schedu][0x5c08546a][18:03:25.952493] wlan: [2204:I:PE] Assoc req TX: vdev 0 to b6:2a:7d:83:93:1c seq num 2050 [ 67.844152] [schedu][0x5c096180][18:03:25.956082] wlan: [2204:I:PE] Assoc req TX: success [ 67.845293] [schedu][0x5c09b75d][18:03:25.957226] wlan: [2204:I:PE] Assoc rsp RX: subtype 0 vdev 0 sys role 3 lim state 10 rssi -25 from b6:2a:7d:83:93:1c [ 67.877552] [soft_i][0x5c132916][18:03:25.989462] wlan: [0:I:DP] dp_addba_requestprocess_wifi3 restore BA win 64 based on addba req [ 67.901296] [schedu][0x5c1a1eef][18:03:26.013220] wlan: [2204:E:QDF] qdf_mem_malloc_debug: 1206: Cannot malloc 0 bytes @ csr_get_cfg_max_tx_power:14199 [ 67.924119] [schedu][0x5c207db3][18:03:26.034965] wlan: [2204:E:QDF] qdf_mem_malloc_debug: 1206: Cannot malloc 0 bytes @ csr_get_cfg_max_tx_power:14199 [ 67.930219] zram0: detected capacity change from 0 to 4294967296 [ 67.951450] [soft_i][0x5c28ce4f][18:03:26.063347] wlan: [0:E:DP] dp_tx_initialize_threshold: tx flow control threshold is set, pool size is 4096 [ 67.971293] [schedu][0x5c2ea0c2][18:03:26.083219] wlan: [2204:I:HDD] wlan0(vdevid-0): 5a:0c:b5:4a:19:a0 connected to b6:2a:7d:83:93:1c [ 68.033739] [dp_rx_][0x5c40ece3][18:03:26.145673] wlan: [2495:I:QDF] EAPOL-1 RX: SA:b6:2a:7d:83:93:1c DA:5a:0c:b5:4a:19:a0 [ 68.062655] logd: Skipping entries from slow reader, pid 1262, fd 14, from LogBuffer::Prune() [ 68.149086] binder: 3021:3021 ioctl 40046210 7fc826c6b4 returned -22 [ 68.208513] [soft_i][0x5c7420cd][18:03:26.320445] wlan: [0:I:QDF] EAPOL-2 TX: SA:5a:0c:b5:4a:19:a0 DA:b6:2a:7d:83:93:1c msdu_id:0 status: succ [ 68.290411] binder: 3052:3052 ioctl 40046210 7fc826c6b4 returned -22 [ 68.310096] [dp_rx_][0x5c91e37e][18:03:26.422027] wlan: [2495:I:QDF] EAPOL-3 RX: SA:b6:2a:7d:83:93:1c DA:5a:0c:b5:4a:19:a0 [ 68.315281] [soft_i][0x5c93687f][18:03:26.427214] wlan: [0:I:QDF] EAPOL-4 TX: SA:5a:0c:b5:4a:19:a0 DA:b6:2a:7d:83:93:1c msdu_id:0 status: succ [ 68.335665] [schedu][0x5c99618c][18:03:26.447601] wlan: [2204:E:QDF] qdf_mem_malloc_debug: 1206: Cannot malloc 0 bytes @ csr_get_cfg_max_tx_power:14199 [ 68.360981] i2c_geni 980000.i2c: i2c error :-107 [ 68.365797] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 68.390824] Adding 4194300k swap on /dev/block/zram0. Priority:32758 extents:1 across:4194300k SS [ 68.396033] i2c_geni 980000.i2c: i2c error :-107 [ 68.401417] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 68.418966] [schedu][0x5cb1c91a][18:03:26.530902] wlan: [2204:I:WMI] LFR3:OKC enabled [ 68.420039] [schedu][0x5cb219a8][18:03:26.531976] wlan: [2204:I:WMI] LFR3:PMKSA caching enabled [ 68.470966] logd: Skipping entries from slow reader, pid 1262, fd 14, from LogBuffer::Prune() [ 68.583933] binder: 3103:3103 ioctl 40046210 7fc826c6b4 returned -22 [ 68.589925] afe_find_cal_topo_id_by_port: port id: 0x9000, dev_acdb_id: 0 [ 68.589968] afe_find_cal_topo_id_by_port: top_id:112fc acdb_id:15 afe_port:0x9000 [ 68.589987] afe_get_cal_topology_id: port_id = 0x9000 acdb_id = 15 topology_id = 0x112fc cal_type_index=8 ret=0 [ 68.591040] afe_send_port_topology_id: AFE set topology id 0x112fc enable for port 0x9000 ret 0 [ 68.591069] send_afe_cal_type: cal_index is 0 [ 68.591089] send_afe_cal_type: dev_acdb_id[55] is 0 [ 68.591109] send_afe_cal_type: Sending cal_index cal 0 [ 68.591127] send_afe_cal_type: No cal sent for cal_index 0, port_id = 0x9000! ret -22 [ 68.594808] init: starting service 'qvrd_vndr'... [ 68.600519] afe_send_hw_delay: port_id 0x9000 rate 48000 delay_usec 474 status 0 [ 68.606728] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 68.608138] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 68.611561] binder: 3091:3091 ioctl 40046210 7fc826c6b4 returned -22 [ 68.656391] [wifi@1][0x5cf7526d][18:03:26.768253] wlan: [972:E:HDD] hdd_enable_ns_offload: 484: Failed to cache ns request; status:4 [ 68.665237] init: starting service 'sxrd'... [ 68.754480] init: Service 'qvrd_vndr' (pid 3136) exited with status 1 [ 68.754511] init: Sending signal 9 to service 'qvrd_vndr' (pid 3136) process group... [ 68.754802] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3136 in 0ms [ 68.808523] mv2112_read_status [ 68.808767] mv2112_update_link: 3.0x901(1G): 0x80 [ 68.809426] mv2112_update_link: 3.0x8109(100M): 0x0 [ 68.809444] mv2112_update_link: link 0x0 [ 68.809461] mv2112_read_status: autoneg is disabled [ 68.814024] init: Service 'sxrd' (pid 3142) exited with status 1 [ 68.814122] init: Sending signal 9 to service 'sxrd' (pid 3142) process group... [ 68.815905] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3142 in 1ms [ 68.889435] [soft_i][0x5d3b9dd5][18:03:27.001366] wlan: [0:I:QDF] DHCP-R TX: SA:5a:0c:b5:4a:19:a0 DA:ff:ff:ff:ff:ff:ff msdu_id:0 status: succ [ 68.892125] [dp_rx_][0x5d3c67a6][18:03:27.004056] wlan: [2495:I:QDF] DHCP-R RX: SA:5a:0c:b5:4a:19:a0 DA:ff:ff:ff:ff:ff:ff [ 68.895379] [dp_rx_][0x5d3d5bc1][18:03:27.007311] wlan: [2495:I:QDF] DHCP-A RX: SA:f4:2a:7d:83:93:19 DA:ff:ff:ff:ff:ff:ff [ 68.943590] logd: Skipping entries from slow reader, pid 1262, fd 14, from LogBuffer::Prune() [ 68.954426] binder: 3052:3158 ioctl 40046210 79e477d934 returned -22 [ 69.453472] binder: 3188:3188 ioctl 40046210 7fc826c6b4 returned -22 [ 69.600112] binder: 3223:3223 ioctl 40046210 7fc826c6b4 returned -22 [ 69.647760] [wifi@1][0x5e19c7da][18:03:27.759685] wlan: [972:E:QDF] qdf_mem_malloc_debug: 1206: Cannot malloc 0 bytes @ csr_get_cfg_max_tx_power:14199 [ 69.668256] [wifi@1][0x5e1fc9de][18:03:27.780192] wlan: [972:E:QDF] qdf_mem_malloc_debug: 1206: Cannot malloc 0 bytes @ csr_get_cfg_max_tx_power:14199 [ 69.669188] [schedu][0x5e200f38][18:03:27.781118] wlan: [2204:I:WMI] LFR3:OKC enabled [ 69.702518] [schedu][0x5e29d2c8][18:03:27.814445] wlan: [2204:I:WMI] LFR3:PMKSA caching enabled [ 69.703956] [schedu][0x5e2a3f3b][18:03:27.815891] wlan: [2204:I:WMI] LFR3:OKC enabled [ 69.703972] [schedu][0x5e2a4089][18:03:27.815908] wlan: [2204:I:WMI] LFR3:PMKSA caching enabled [ 69.750727] binder: 3188:3261 ioctl 40046210 79e49e8944 returned -22 [ 69.805262] logd: Skipping entries from slow reader, pid 1262, fd 14, from LogBuffer::Prune() [ 69.830346] binder: 3258:3258 ioctl 40046210 7fc826c6b4 returned -22 [ 69.832472] mv2112_read_status [ 69.833229] mv2112_update_link: 3.0x901(1G): 0x80 [ 69.833461] mv2112_update_link: 3.0x8109(100M): 0x0 [ 69.833478] mv2112_update_link: link 0x0 [ 69.833495] mv2112_read_status: autoneg is disabled [ 69.931847] binder: 2106:2106 ioctl 40046210 7fc826c044 returned -22 [ 70.084499] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based firewall rule not found. Use the iptables CT target to attach helpers instead. [ 70.199171] binder: 3311:3311 ioctl 40046210 7fc826c6b4 returned -22 [ 70.411449] i2c_geni 980000.i2c: i2c error :-107 [ 70.421473] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 70.440409] i2c_geni 980000.i2c: i2c error :-107 [ 70.450636] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 70.649861] binder: 3348:3348 ioctl 40046210 7fc826c6b4 returned -22 [ 70.651600] logd: Skipping entries from slow reader, pid 1262, fd 14, from LogBuffer::Prune() [ 70.856470] mv2112_read_status [ 70.856719] mv2112_update_link: 3.0x901(1G): 0x80 [ 70.856952] mv2112_update_link: 3.0x8109(100M): 0x0 [ 70.856969] mv2112_update_link: link 0x0 [ 70.856985] mv2112_read_status: autoneg is disabled [ 70.868360] logd: Skipping entries from slow reader, pid 1262, fd 14, from LogBuffer::Prune() [ 71.120604] binder: 2911:3395 ioctl 40046210 7a3ec9b604 returned -22 [ 71.138791] binder: 3386:3386 ioctl 40046210 7fc826c6b4 returned -22 [ 71.230724] binder: 3393:3393 ioctl 40046210 7fc826c6b4 returned -22 [ 71.279652] binder: 3420:3420 ioctl 40046210 7fc826c6b4 returned -22 [ 71.543741] binder: 3453:3453 ioctl 40046210 7fc826c6b4 returned -22 [ 71.880621] mv2112_read_status [ 71.881264] mv2112_update_link: 3.0x901(1G): 0x80 [ 71.881532] mv2112_update_link: 3.0x8109(100M): 0x0 [ 71.881560] mv2112_update_link: link 0x0 [ 71.881588] mv2112_read_status: autoneg is disabled [ 71.959640] binder: 3476:3476 ioctl 40046210 7fc826c6b4 returned -22 [ 72.274693] binder: 3497:3497 ioctl 40046210 7fc826c6b4 returned -22 [ 72.278500] binder: 3498:3498 ioctl 40046210 7fc826c6b4 returned -22 [ 72.489753] i2c_geni 980000.i2c: i2c error :-107 [ 72.495646] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 72.509274] i2c_geni 980000.i2c: i2c error :-107 [ 72.514073] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 72.657173] binder: 3536:3536 ioctl 40046210 7fc826c6b4 returned -22 [ 72.904510] mv2112_read_status [ 72.904912] mv2112_update_link: 3.0x901(1G): 0x80 [ 72.905148] mv2112_update_link: 3.0x8109(100M): 0x0 [ 72.905166] mv2112_update_link: link 0x0 [ 72.905182] mv2112_read_status: autoneg is disabled [ 72.941586] binder: 3562:3562 ioctl 40046210 7fc826c6b4 returned -22 [ 73.236721] binder: 3583:3583 ioctl 40046210 7fc826c6b4 returned -22 [ 73.602919] type=1400 audit(1661508211.711:105): avc: denied { read } for comm="ip" name="rt_tables" dev="dm-10" ino=350 scontext=u:r:ethernet:s0 tcontext=u:object_r:net_data_file:s0 tclass=file permissive=0 [ 73.614409] type=1400 audit(1661508211.715:106): avc: denied { write } for comm="sh" name="ip_forward" dev="proc" ino=31629 scontext=u:r:ethernet:s0 tcontext=u:object_r:proc_net:s0 tclass=file permissive=0 [ 73.615241] type=1400 audit(1661508211.719:107): avc: denied { write } for comm="sh" name="ip_default_ttl" dev="proc" ino=53792 scontext=u:r:ethernet:s0 tcontext=u:object_r:proc_net:s0 tclass=file permissive=0 [ 73.615411] type=1400 audit(1661508211.723:108): avc: denied { write } for comm="sh" name="tcp_keepalive_probes" dev="proc" ino=53793 scontext=u:r:ethernet:s0 tcontext=u:object_r:proc_net:s0 tclass=file permissive=0 [ 73.615575] type=1400 audit(1661508211.723:109): avc: denied { write } for comm="sh" name="tcp_keepalive_intvl" dev="proc" ino=53794 scontext=u:r:ethernet:s0 tcontext=u:object_r:proc_net:s0 tclass=file permissive=0 [ 73.615740] type=1400 audit(1661508211.723:110): avc: denied { write } for comm="sh" name="tcp_keepalive_time" dev="proc" ino=53795 scontext=u:r:ethernet:s0 tcontext=u:object_r:proc_net:s0 tclass=file permissive=0 [ 73.617039] type=1400 audit(1661508211.723:111): avc: denied { write } for comm="sh" name="tcp_rmem" dev="proc" ino=53796 scontext=u:r:ethernet:s0 tcontext=u:object_r:proc_net:s0 tclass=file permissive=0 [ 73.617579] type=1400 audit(1661508211.727:112): avc: denied { write } for comm="sh" name="tcp_wmem" dev="proc" ino=53797 scontext=u:r:ethernet:s0 tcontext=u:object_r:proc_net:s0 tclass=file permissive=0 [ 73.619429] audit: audit_lost=1 audit_rate_limit=5 audit_backlog_limit=64 [ 73.619477] audit: rate limit exceeded [ 73.632798] afe_close: port_id = 0x9000 [ 73.639217] init: Service 'ethernet' (pid 2824) exited with status 1 oneshot service took 7.029000 seconds in background [ 73.639302] init: Sending signal 9 to service 'ethernet' (pid 2824) process group... [ 73.640032] libprocessgroup: Successfully killed process cgroup uid 0 pid 2824 in 0ms [ 73.652103] init: starting service 'qvrd_vndr'... [ 73.655370] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 73.658355] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 73.706854] init: starting service 'sxrd'... [ 73.723066] binder: 3609:3609 ioctl 40046210 7fc826c6b4 returned -22 [ 73.744457] init: Service 'qvrd_vndr' (pid 3610) exited with status 1 [ 73.744493] init: Sending signal 9 to service 'qvrd_vndr' (pid 3610) process group... [ 73.744743] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3610 in 0ms [ 73.928457] mv2112_read_status [ 73.928706] mv2112_update_link: 3.0x901(1G): 0x80 [ 73.928940] mv2112_update_link: 3.0x8109(100M): 0x0 [ 73.928957] mv2112_update_link: link 0x0 [ 73.928974] mv2112_read_status: autoneg is disabled [ 74.141771] binder: 3633:3633 ioctl 40046210 7fc826c6b4 returned -22 [ 74.497541] binder: 3651:3651 ioctl 40046210 7fc826c6b4 returned -22 [ 74.537896] i2c_geni 980000.i2c: i2c error :-107 [ 74.543048] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 74.553448] i2c_geni 980000.i2c: i2c error :-107 [ 74.558469] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 74.927330] binder: 3670:3670 ioctl 40046210 7fc826c6b4 returned -22 [ 74.952659] mv2112_read_status [ 74.952907] mv2112_update_link: 3.0x901(1G): 0x80 [ 74.953141] mv2112_update_link: 3.0x8109(100M): 0x0 [ 74.953158] mv2112_update_link: link 0x0 [ 74.953175] mv2112_read_status: autoneg is disabled [ 75.809468] logd: Skipping entries from slow reader, pid 1262, fd 14, from LogBuffer::Prune() [ 75.976425] mv2112_read_status [ 75.976678] mv2112_update_link: 3.0x901(1G): 0x80 [ 75.976912] mv2112_update_link: 3.0x8109(100M): 0x0 [ 75.976930] mv2112_update_link: link 0x0 [ 75.976947] mv2112_read_status: autoneg is disabled [ 76.585975] i2c_geni 980000.i2c: i2c error :-107 [ 76.590901] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 76.601176] i2c_geni 980000.i2c: i2c error :-107 [ 76.606038] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 77.000483] mv2112_read_status [ 77.001050] mv2112_update_link: 3.0x901(1G): 0x80 [ 77.001285] mv2112_update_link: 3.0x8109(100M): 0x0 [ 77.001302] mv2112_update_link: link 0x0 [ 77.001318] mv2112_read_status: autoneg is disabled [ 78.024544] mv2112_read_status [ 78.024793] mv2112_update_link: 3.0x901(1G): 0x80 [ 78.025026] mv2112_update_link: 3.0x8109(100M): 0x0 [ 78.025043] mv2112_update_link: link 0x0 [ 78.025060] mv2112_read_status: autoneg is disabled [ 78.633805] i2c_geni 980000.i2c: i2c error :-107 [ 78.639152] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 78.649909] i2c_geni 980000.i2c: i2c error :-107 [ 78.654856] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 78.677301] init: starting service 'qvrd_vndr'... [ 78.680475] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 78.682919] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 78.725737] init: starting service 'sxrd'... [ 78.791599] init: Service 'qvrd_vndr' (pid 3688) exited with status 1 [ 78.791697] init: Sending signal 9 to service 'qvrd_vndr' (pid 3688) process group... [ 78.793051] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3688 in 1ms [ 78.805077] init: Service 'sxrd' (pid 3689) exited with status 1 [ 78.805153] init: Sending signal 9 to service 'sxrd' (pid 3689) process group... [ 78.805763] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3689 in 0ms [ 79.048468] mv2112_read_status [ 79.049018] mv2112_update_link: 3.0x901(1G): 0x80 [ 79.049252] mv2112_update_link: 3.0x8109(100M): 0x0 [ 79.049269] mv2112_update_link: link 0x0 [ 79.049286] mv2112_read_status: autoneg is disabled [ 80.072432] mv2112_read_status [ 80.072682] mv2112_update_link: 3.0x901(1G): 0x80 [ 80.072917] mv2112_update_link: 3.0x8109(100M): 0x0 [ 80.072934] mv2112_update_link: link 0x0 [ 80.072951] mv2112_read_status: autoneg is disabled [ 80.232707] binder: 3695:3695 ioctl 40046210 ffa3bca8 returned -22 [ 80.397219] binder: 3021:3021 ioctl 40046210 7fc826bd64 returned -22 [ 80.665723] binder: 3715:3715 ioctl 40046210 7fc826c6b4 returned -22 [ 80.682041] i2c_geni 980000.i2c: i2c error :-107 [ 80.687267] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 80.698957] i2c_geni 980000.i2c: i2c error :-107 [ 80.704061] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 81.096781] mv2112_read_status [ 81.097116] mv2112_update_link: 3.0x901(1G): 0x80 [ 81.097420] mv2112_update_link: 3.0x8109(100M): 0x0 [ 81.097463] mv2112_update_link: link 0x0 [ 81.097506] mv2112_read_status: autoneg is disabled [ 81.138921] binder: 3736:3736 ioctl 40046210 7fc826c6b4 returned -22 [ 82.120486] mv2112_read_status [ 82.120740] mv2112_update_link: 3.0x901(1G): 0x80 [ 82.120974] mv2112_update_link: 3.0x8109(100M): 0x0 [ 82.120990] mv2112_update_link: link 0x0 [ 82.121008] mv2112_read_status: autoneg is disabled [ 82.729869] i2c_geni 980000.i2c: i2c error :-107 [ 82.735373] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 82.746050] i2c_geni 980000.i2c: i2c error :-107 [ 82.751385] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 83.144430] mv2112_read_status [ 83.144683] mv2112_update_link: 3.0x901(1G): 0x80 [ 83.144917] mv2112_update_link: 3.0x8109(100M): 0x0 [ 83.144934] mv2112_update_link: link 0x0 [ 83.144951] mv2112_read_status: autoneg is disabled [ 83.711842] init: starting service 'qvrd_vndr'... [ 83.715269] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 83.717982] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 83.765684] init: starting service 'sxrd'... [ 83.826543] init: Service 'qvrd_vndr' (pid 3754) exited with status 1 [ 83.826608] init: Sending signal 9 to service 'qvrd_vndr' (pid 3754) process group... [ 83.827122] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3754 in 0ms [ 83.840028] init: Service 'sxrd' (pid 3755) exited with status 1 [ 83.840105] init: Sending signal 9 to service 'sxrd' (pid 3755) process group... [ 83.840857] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3755 in 0ms [ 83.986173] qcom_rpmh DRV:apps_rsc TCS Busy, retrying RPMH message send: addr=0x40d00 [ 84.133154] [soft_i][0x6ead8c98][18:03:42.245084] wlan: [0:I:DP] dp_addba_requestprocess_wifi3 restore BA win 64 based on addba req [ 84.168505] mv2112_read_status [ 84.168755] mv2112_update_link: 3.0x901(1G): 0x80 [ 84.168989] mv2112_update_link: 3.0x8109(100M): 0x0 [ 84.169006] mv2112_update_link: link 0x0 [ 84.169024] mv2112_read_status: autoneg is disabled [ 84.777859] i2c_geni 980000.i2c: i2c error :-107 [ 84.782782] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 84.792967] i2c_geni 980000.i2c: i2c error :-107 [ 84.797956] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 85.192426] mv2112_read_status [ 85.192678] mv2112_update_link: 3.0x901(1G): 0x80 [ 85.192911] mv2112_update_link: 3.0x8109(100M): 0x0 [ 85.192928] mv2112_update_link: link 0x0 [ 85.192945] mv2112_read_status: autoneg is disabled [ 86.216895] mv2112_read_status [ 86.217143] mv2112_update_link: 3.0x901(1G): 0x80 [ 86.217376] mv2112_update_link: 3.0x8109(100M): 0x0 [ 86.217393] mv2112_update_link: link 0x0 [ 86.217410] mv2112_read_status: autoneg is disabled [ 86.827383] i2c_geni 980000.i2c: i2c error :-107 [ 86.832554] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 86.843611] i2c_geni 980000.i2c: i2c error :-107 [ 86.848549] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 86.925310] binder: 3759:3759 ioctl 40046210 7fc826c6b4 returned -22 [ 87.240481] mv2112_read_status [ 87.240732] mv2112_update_link: 3.0x901(1G): 0x80 [ 87.240967] mv2112_update_link: 3.0x8109(100M): 0x0 [ 87.240984] mv2112_update_link: link 0x0 [ 87.241001] mv2112_read_status: autoneg is disabled [ 88.264452] mv2112_read_status [ 88.264711] mv2112_update_link: 3.0x901(1G): 0x80 [ 88.265188] mv2112_update_link: 3.0x8109(100M): 0x0 [ 88.265206] mv2112_update_link: link 0x0 [ 88.265223] mv2112_read_status: autoneg is disabled [ 88.751489] init: starting service 'qvrd_vndr'... [ 88.754959] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 88.758682] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 88.804096] init: starting service 'sxrd'... [ 88.873687] i2c_geni 980000.i2c: i2c error :-107 [ 88.878945] init: Service 'sxrd' (pid 3780) exited with status 1 [ 88.879040] init: Sending signal 9 to service 'sxrd' (pid 3780) process group... [ 88.879439] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 88.879880] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3780 in 0ms [ 88.890373] i2c_geni 980000.i2c: i2c error :-107 [ 88.893288] init: Service 'qvrd_vndr' (pid 3779) exited with status 1 [ 88.895225] init: Sending signal 9 to service 'qvrd_vndr' (pid 3779) process group... [ 88.895248] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 88.895839] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3779 in 0ms [ 89.288443] mv2112_read_status [ 89.288772] mv2112_update_link: 3.0x901(1G): 0x80 [ 89.289006] mv2112_update_link: 3.0x8109(100M): 0x0 [ 89.289024] mv2112_update_link: link 0x0 [ 89.289041] mv2112_read_status: autoneg is disabled [ 90.312488] mv2112_read_status [ 90.312733] mv2112_update_link: 3.0x901(1G): 0x80 [ 90.312966] mv2112_update_link: 3.0x8109(100M): 0x0 [ 90.312983] mv2112_update_link: link 0x0 [ 90.313000] mv2112_read_status: autoneg is disabled [ 90.921612] i2c_geni 980000.i2c: i2c error :-107 [ 90.926949] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 90.938684] i2c_geni 980000.i2c: i2c error :-107 [ 90.943610] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 91.336433] mv2112_read_status [ 91.336912] mv2112_update_link: 3.0x901(1G): 0x80 [ 91.337143] mv2112_update_link: 3.0x8109(100M): 0x0 [ 91.337161] mv2112_update_link: link 0x0 [ 91.337177] mv2112_read_status: autoneg is disabled [ 92.360439] mv2112_read_status [ 92.360690] mv2112_update_link: 3.0x901(1G): 0x80 [ 92.360924] mv2112_update_link: 3.0x8109(100M): 0x0 [ 92.360942] mv2112_update_link: link 0x0 [ 92.360959] mv2112_read_status: autoneg is disabled [ 92.845055] binder: 3784:3784 ioctl 40046210 7fc826c6b4 returned -22 [ 92.972521] i2c_geni 980000.i2c: i2c error :-107 [ 92.978810] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 92.991461] i2c_geni 980000.i2c: i2c error :-107 [ 92.997570] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 93.384430] mv2112_read_status [ 93.384679] mv2112_update_link: 3.0x901(1G): 0x80 [ 93.384913] mv2112_update_link: 3.0x8109(100M): 0x0 [ 93.384931] mv2112_update_link: link 0x0 [ 93.384948] mv2112_read_status: autoneg is disabled [ 93.792988] init: starting service 'qvrd_vndr'... [ 93.796590] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 93.799333] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 93.845006] init: starting service 'sxrd'... [ 93.917531] init: Service 'qvrd_vndr' (pid 3802) exited with status 1 [ 93.917632] init: Sending signal 9 to service 'qvrd_vndr' (pid 3802) process group... [ 93.918323] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3802 in 0ms [ 93.938124] init: Service 'sxrd' (pid 3803) exited with status 1 [ 93.938390] init: Sending signal 9 to service 'sxrd' (pid 3803) process group... [ 93.938956] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3803 in 0ms [ 94.408443] mv2112_read_status [ 94.408694] mv2112_update_link: 3.0x901(1G): 0x80 [ 94.408928] mv2112_update_link: 3.0x8109(100M): 0x0 [ 94.408946] mv2112_update_link: link 0x0 [ 94.408962] mv2112_read_status: autoneg is disabled [ 95.017730] i2c_geni 980000.i2c: i2c error :-107 [ 95.022644] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 95.032742] i2c_geni 980000.i2c: i2c error :-107 [ 95.037602] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 95.432420] mv2112_read_status [ 95.432663] mv2112_update_link: 3.0x901(1G): 0x80 [ 95.432899] mv2112_update_link: 3.0x8109(100M): 0x0 [ 95.432916] mv2112_update_link: link 0x0 [ 95.432933] mv2112_read_status: autoneg is disabled [ 96.456424] mv2112_read_status [ 96.456677] mv2112_update_link: 3.0x901(1G): 0x80 [ 96.456911] mv2112_update_link: 3.0x8109(100M): 0x0 [ 96.456928] mv2112_update_link: link 0x0 [ 96.456945] mv2112_read_status: autoneg is disabled [ 97.065804] i2c_geni 980000.i2c: i2c error :-107 [ 97.070778] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 97.081035] i2c_geni 980000.i2c: i2c error :-107 [ 97.086094] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 97.480410] mv2112_read_status [ 97.480934] mv2112_update_link: 3.0x901(1G): 0x80 [ 97.481165] mv2112_update_link: 3.0x8109(100M): 0x0 [ 97.481182] mv2112_update_link: link 0x0 [ 97.481198] mv2112_read_status: autoneg is disabled [ 98.476256] [schedu][0x7f17a0a2][18:03:56.588177] wlan: [2204:I:WMA] [18:03:56.566000] [NEIGH_RPT_REQ] VDEV[0] [ 98.476376] [schedu][0x7f17aa5f][18:03:56.588307] wlan: [2204:I:WMA] [18:03:56.571000] [NEIGH_RPT_RSP] VDEV[0] NO Ch update [ 98.504493] mv2112_read_status [ 98.504742] mv2112_update_link: 3.0x901(1G): 0x80 [ 98.504976] mv2112_update_link: 3.0x8109(100M): 0x0 [ 98.504994] mv2112_update_link: link 0x0 [ 98.505011] mv2112_read_status: autoneg is disabled [ 98.835768] init: starting service 'qvrd_vndr'... [ 98.843732] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 98.850578] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 98.925317] init: starting service 'sxrd'... [ 98.987580] init: Service 'qvrd_vndr' (pid 3811) exited with status 1 [ 98.987689] init: Sending signal 9 to service 'qvrd_vndr' (pid 3811) process group... [ 98.988618] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3811 in 0ms [ 99.015176] init: Service 'sxrd' (pid 3812) exited with status 1 [ 99.015258] init: Sending signal 9 to service 'sxrd' (pid 3812) process group... [ 99.015937] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3812 in 0ms [ 99.019941] binder: 3810:3810 ioctl 40046210 7fc826c6b4 returned -22 [ 99.114556] i2c_geni 980000.i2c: i2c error :-107 [ 99.120637] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 99.142336] i2c_geni 980000.i2c: i2c error :-107 [ 99.147558] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 99.528647] mv2112_read_status [ 99.529255] mv2112_update_link: 3.0x901(1G): 0x80 [ 99.529558] mv2112_update_link: 3.0x8109(100M): 0x0 [ 99.529601] mv2112_update_link: link 0x0 [ 99.529644] mv2112_read_status: autoneg is disabled [ 100.552948] mv2112_read_status [ 100.553271] mv2112_update_link: 3.0x901(1G): 0x80 [ 100.553573] mv2112_update_link: 3.0x8109(100M): 0x0 [ 100.553617] mv2112_update_link: link 0x0 [ 100.553659] mv2112_read_status: autoneg is disabled [ 101.163431] i2c_geni 980000.i2c: i2c error :-107 [ 101.169345] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 101.179910] i2c_geni 980000.i2c: i2c error :-107 [ 101.185094] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 101.452780] boot log copy done [ 101.576629] mv2112_read_status [ 101.577241] mv2112_update_link: 3.0x901(1G): 0x80 [ 101.577546] mv2112_update_link: 3.0x8109(100M): 0x0 [ 101.577590] mv2112_update_link: link 0x0 [ 101.577632] mv2112_read_status: autoneg is disabled [ 102.600619] mv2112_read_status [ 102.600935] mv2112_update_link: 3.0x901(1G): 0x80 [ 102.601237] mv2112_update_link: 3.0x8109(100M): 0x0 [ 102.601280] mv2112_update_link: link 0x0 [ 102.601322] mv2112_read_status: autoneg is disabled [ 103.211268] i2c_geni 980000.i2c: i2c error :-107 [ 103.217194] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 103.228676] i2c_geni 980000.i2c: i2c error :-107 [ 103.233584] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 103.624475] mv2112_read_status [ 103.624730] mv2112_update_link: 3.0x901(1G): 0x80 [ 103.624964] mv2112_update_link: 3.0x8109(100M): 0x0 [ 103.624981] mv2112_update_link: link 0x0 [ 103.624998] mv2112_read_status: autoneg is disabled [ 103.907313] init: starting service 'qvrd_vndr'... [ 103.919960] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 103.928431] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 103.980644] init: starting service 'sxrd'... [ 104.025353] init: Service 'qvrd_vndr' (pid 3840) exited with status 1 [ 104.025455] init: Sending signal 9 to service 'qvrd_vndr' (pid 3840) process group... [ 104.026144] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3840 in 0ms [ 104.056713] init: Service 'sxrd' (pid 3841) exited with status 1 [ 104.056919] init: Sending signal 9 to service 'sxrd' (pid 3841) process group... [ 104.058641] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3841 in 1ms [ 104.648626] mv2112_read_status [ 104.648949] mv2112_update_link: 3.0x901(1G): 0x80 [ 104.649248] mv2112_update_link: 3.0x8109(100M): 0x0 [ 104.649292] mv2112_update_link: link 0x0 [ 104.649334] mv2112_read_status: autoneg is disabled [ 105.258755] i2c_geni 980000.i2c: i2c error :-107 [ 105.263904] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 105.274858] i2c_geni 980000.i2c: i2c error :-107 [ 105.279965] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 105.672615] mv2112_read_status [ 105.673348] mv2112_update_link: 3.0x901(1G): 0x80 [ 105.673648] mv2112_update_link: 3.0x8109(100M): 0x0 [ 105.673692] mv2112_update_link: link 0x0 [ 105.673735] mv2112_read_status: autoneg is disabled [ 106.696618] mv2112_read_status [ 106.697371] mv2112_update_link: 3.0x901(1G): 0x80 [ 106.697670] mv2112_update_link: 3.0x8109(100M): 0x0 [ 106.697713] mv2112_update_link: link 0x0 [ 106.697755] mv2112_read_status: autoneg is disabled [ 107.307227] i2c_geni 980000.i2c: i2c error :-107 [ 107.313182] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 107.324114] i2c_geni 980000.i2c: i2c error :-107 [ 107.329198] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 107.720666] mv2112_read_status [ 107.721410] mv2112_update_link: 3.0x901(1G): 0x80 [ 107.721712] mv2112_update_link: 3.0x8109(100M): 0x0 [ 107.721755] mv2112_update_link: link 0x0 [ 107.721798] mv2112_read_status: autoneg is disabled [ 108.744473] mv2112_read_status [ 108.744745] mv2112_update_link: 3.0x901(1G): 0x80 [ 108.745003] mv2112_update_link: 3.0x8109(100M): 0x0 [ 108.745025] mv2112_update_link: link 0x0 [ 108.745045] mv2112_read_status: autoneg is disabled [ 108.967156] init: starting service 'qvrd_vndr'... [ 108.974558] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 108.982351] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 109.037971] init: starting service 'sxrd'... [ 109.081723] init: Service 'qvrd_vndr' (pid 3845) exited with status 1 [ 109.081832] init: Sending signal 9 to service 'qvrd_vndr' (pid 3845) process group... [ 109.082558] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3845 in 0ms [ 109.111046] init: Service 'sxrd' (pid 3846) exited with status 1 [ 109.111179] init: Sending signal 9 to service 'sxrd' (pid 3846) process group... [ 109.112104] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3846 in 0ms [ 109.354663] i2c_geni 980000.i2c: i2c error :-107 [ 109.359652] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 109.370317] i2c_geni 980000.i2c: i2c error :-107 [ 109.375264] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 109.768626] mv2112_read_status [ 109.769375] mv2112_update_link: 3.0x901(1G): 0x80 [ 109.769680] mv2112_update_link: 3.0x8109(100M): 0x0 [ 109.769724] mv2112_update_link: link 0x0 [ 109.769766] mv2112_read_status: autoneg is disabled [ 110.792645] mv2112_read_status [ 110.793197] mv2112_update_link: 3.0x901(1G): 0x80 [ 110.793499] mv2112_update_link: 3.0x8109(100M): 0x0 [ 110.793542] mv2112_update_link: link 0x0 [ 110.793584] mv2112_read_status: autoneg is disabled [ 111.402913] i2c_geni 980000.i2c: i2c error :-107 [ 111.408017] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 111.418890] i2c_geni 980000.i2c: i2c error :-107 [ 111.424056] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 111.816768] mv2112_read_status [ 111.817080] mv2112_update_link: 3.0x901(1G): 0x80 [ 111.817378] mv2112_update_link: 3.0x8109(100M): 0x0 [ 111.817421] mv2112_update_link: link 0x0 [ 111.817464] mv2112_read_status: autoneg is disabled [ 112.840751] mv2112_read_status [ 112.841059] mv2112_update_link: 3.0x901(1G): 0x80 [ 112.841357] mv2112_update_link: 3.0x8109(100M): 0x0 [ 112.841400] mv2112_update_link: link 0x0 [ 112.841442] mv2112_read_status: autoneg is disabled [ 113.451525] i2c_geni 980000.i2c: i2c error :-107 [ 113.457006] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 113.470733] i2c_geni 980000.i2c: i2c error :-107 [ 113.475741] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 113.864633] mv2112_read_status [ 113.864967] mv2112_update_link: 3.0x901(1G): 0x80 [ 113.865271] mv2112_update_link: 3.0x8109(100M): 0x0 [ 113.865314] mv2112_update_link: link 0x0 [ 113.865357] mv2112_read_status: autoneg is disabled [ 114.024491] init: starting service 'qvrd_vndr'... [ 114.031941] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 114.039440] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 114.096348] init: starting service 'sxrd'... [ 114.142776] init: Service 'qvrd_vndr' (pid 3848) exited with status 1 [ 114.142881] init: Sending signal 9 to service 'qvrd_vndr' (pid 3848) process group... [ 114.143627] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3848 in 0ms [ 114.169668] init: Service 'sxrd' (pid 3849) exited with status 1 [ 114.169864] init: Sending signal 9 to service 'sxrd' (pid 3849) process group... [ 114.171315] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3849 in 1ms [ 114.888636] mv2112_read_status [ 114.889334] mv2112_update_link: 3.0x901(1G): 0x80 [ 114.889636] mv2112_update_link: 3.0x8109(100M): 0x0 [ 114.889680] mv2112_update_link: link 0x0 [ 114.889722] mv2112_read_status: autoneg is disabled [ 115.499094] i2c_geni 980000.i2c: i2c error :-107 [ 115.504858] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 115.515870] i2c_geni 980000.i2c: i2c error :-107 [ 115.521225] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 115.912723] mv2112_read_status [ 115.913049] mv2112_update_link: 3.0x901(1G): 0x80 [ 115.913348] mv2112_update_link: 3.0x8109(100M): 0x0 [ 115.913390] mv2112_update_link: link 0x0 [ 115.913433] mv2112_read_status: autoneg is disabled [ 116.936725] mv2112_read_status [ 116.937047] mv2112_update_link: 3.0x901(1G): 0x80 [ 116.937347] mv2112_update_link: 3.0x8109(100M): 0x0 [ 116.937390] mv2112_update_link: link 0x0 [ 116.937432] mv2112_read_status: autoneg is disabled [ 117.547314] i2c_geni 980000.i2c: i2c error :-107 [ 117.553124] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 117.564177] i2c_geni 980000.i2c: i2c error :-107 [ 117.569143] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 117.960603] mv2112_read_status [ 117.960931] mv2112_update_link: 3.0x901(1G): 0x80 [ 117.961233] mv2112_update_link: 3.0x8109(100M): 0x0 [ 117.961277] mv2112_update_link: link 0x0 [ 117.961320] mv2112_read_status: autoneg is disabled [ 118.984624] mv2112_read_status [ 118.984956] mv2112_update_link: 3.0x901(1G): 0x80 [ 118.985257] mv2112_update_link: 3.0x8109(100M): 0x0 [ 118.985301] mv2112_update_link: link 0x0 [ 118.985343] mv2112_read_status: autoneg is disabled [ 119.083216] init: starting service 'qvrd_vndr'... [ 119.092089] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 119.099658] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 119.157504] init: starting service 'sxrd'... [ 119.211808] init: Service 'qvrd_vndr' (pid 3851) exited with status 1 [ 119.211907] init: Sending signal 9 to service 'qvrd_vndr' (pid 3851) process group... [ 119.213006] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3851 in 0ms [ 119.232905] init: Service 'sxrd' (pid 3852) exited with status 1 [ 119.232982] init: Sending signal 9 to service 'sxrd' (pid 3852) process group... [ 119.233556] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3852 in 0ms [ 119.593790] i2c_geni 980000.i2c: i2c error :-107 [ 119.598687] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 119.609635] i2c_geni 980000.i2c: i2c error :-107 [ 119.614791] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 120.008442] mv2112_read_status [ 120.008696] mv2112_update_link: 3.0x901(1G): 0x80 [ 120.008930] mv2112_update_link: 3.0x8109(100M): 0x0 [ 120.008947] mv2112_update_link: link 0x0 [ 120.008964] mv2112_read_status: autoneg is disabled [ 121.032473] mv2112_read_status [ 121.032723] mv2112_update_link: 3.0x901(1G): 0x80 [ 121.032957] mv2112_update_link: 3.0x8109(100M): 0x0 [ 121.032974] mv2112_update_link: link 0x0 [ 121.032991] mv2112_read_status: autoneg is disabled [ 121.642042] i2c_geni 980000.i2c: i2c error :-107 [ 121.647119] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 121.657695] i2c_geni 980000.i2c: i2c error :-107 [ 121.662695] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 122.056464] mv2112_read_status [ 122.057002] mv2112_update_link: 3.0x901(1G): 0x80 [ 122.057236] mv2112_update_link: 3.0x8109(100M): 0x0 [ 122.057253] mv2112_update_link: link 0x0 [ 122.057269] mv2112_read_status: autoneg is disabled [ 123.080500] mv2112_read_status [ 123.080754] mv2112_update_link: 3.0x901(1G): 0x80 [ 123.080989] mv2112_update_link: 3.0x8109(100M): 0x0 [ 123.081007] mv2112_update_link: link 0x0 [ 123.081025] mv2112_read_status: autoneg is disabled [ 123.689759] i2c_geni 980000.i2c: i2c error :-107 [ 123.694673] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 123.714663] i2c_geni 980000.i2c: i2c error :-107 [ 123.719520] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 124.104471] mv2112_read_status [ 124.104723] mv2112_update_link: 3.0x901(1G): 0x80 [ 124.105189] mv2112_update_link: 3.0x8109(100M): 0x0 [ 124.105207] mv2112_update_link: link 0x0 [ 124.105224] mv2112_read_status: autoneg is disabled [ 124.142005] init: starting service 'qvrd_vndr'... [ 124.145401] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 124.148040] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 124.188684] init: starting service 'sxrd'... [ 124.251513] init: Service 'qvrd_vndr' (pid 3862) exited with status 1 [ 124.251602] init: Sending signal 9 to service 'qvrd_vndr' (pid 3862) process group... [ 124.252217] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3862 in 0ms [ 124.281582] init: Service 'sxrd' (pid 3863) exited with status 1 [ 124.281644] init: Sending signal 9 to service 'sxrd' (pid 3863) process group... [ 124.282146] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3863 in 0ms [ 125.128631] mv2112_read_status [ 125.128947] mv2112_update_link: 3.0x901(1G): 0x80 [ 125.129246] mv2112_update_link: 3.0x8109(100M): 0x0 [ 125.129289] mv2112_update_link: link 0x0 [ 125.129331] mv2112_read_status: autoneg is disabled [ 125.739316] i2c_geni 980000.i2c: i2c error :-107 [ 125.745022] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 125.756224] i2c_geni 980000.i2c: i2c error :-107 [ 125.761507] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 126.152600] mv2112_read_status [ 126.152910] mv2112_update_link: 3.0x901(1G): 0x80 [ 126.153211] mv2112_update_link: 3.0x8109(100M): 0x0 [ 126.153254] mv2112_update_link: link 0x0 [ 126.153296] mv2112_read_status: autoneg is disabled [ 127.176610] mv2112_read_status [ 127.176923] mv2112_update_link: 3.0x901(1G): 0x80 [ 127.177222] mv2112_update_link: 3.0x8109(100M): 0x0 [ 127.177266] mv2112_update_link: link 0x0 [ 127.177309] mv2112_read_status: autoneg is disabled [ 127.787197] i2c_geni 980000.i2c: i2c error :-107 [ 127.792647] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 127.804562] i2c_geni 980000.i2c: i2c error :-107 [ 127.809591] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 128.200602] mv2112_read_status [ 128.200912] mv2112_update_link: 3.0x901(1G): 0x80 [ 128.201212] mv2112_update_link: 3.0x8109(100M): 0x0 [ 128.201256] mv2112_update_link: link 0x0 [ 128.201298] mv2112_read_status: autoneg is disabled [ 128.754658] binder: 2681:3867 ioctl 40046210 7a43adc1f4 returned -22 [ 129.175738] init: starting service 'qvrd_vndr'... [ 129.186005] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 129.197557] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 129.227028] mv2112_read_status [ 129.227272] mv2112_update_link: 3.0x901(1G): 0x80 [ 129.227504] mv2112_update_link: 3.0x8109(100M): 0x0 [ 129.227521] mv2112_update_link: link 0x0 [ 129.227537] mv2112_read_status: autoneg is disabled [ 129.232046] init: starting service 'sxrd'... [ 129.278819] init: Service 'qvrd_vndr' (pid 3879) exited with status 1 [ 129.278893] init: Sending signal 9 to service 'qvrd_vndr' (pid 3879) process group... [ 129.279422] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3879 in 0ms [ 129.318319] init: Service 'sxrd' (pid 3880) exited with status 1 [ 129.318383] init: Sending signal 9 to service 'sxrd' (pid 3880) process group... [ 129.318850] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3880 in 0ms [ 129.834000] i2c_geni 980000.i2c: i2c error :-107 [ 129.838922] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 129.850636] i2c_geni 980000.i2c: i2c error :-107 [ 129.855577] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 130.249452] mv2112_read_status [ 130.249921] mv2112_update_link: 3.0x901(1G): 0x80 [ 130.250446] mv2112_update_link: 3.0x8109(100M): 0x0 [ 130.250480] mv2112_update_link: link 0x0 [ 130.250512] mv2112_read_status: autoneg is disabled [ 131.272650] mv2112_read_status [ 131.272948] mv2112_update_link: 3.0x901(1G): 0x80 [ 131.273228] mv2112_update_link: 3.0x8109(100M): 0x0 [ 131.273258] mv2112_update_link: link 0x0 [ 131.273290] mv2112_read_status: autoneg is disabled [ 131.882015] i2c_geni 980000.i2c: i2c error :-107 [ 131.887153] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 131.897990] i2c_geni 980000.i2c: i2c error :-107 [ 131.902990] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 132.296627] mv2112_read_status [ 132.297406] mv2112_update_link: 3.0x901(1G): 0x80 [ 132.297706] mv2112_update_link: 3.0x8109(100M): 0x0 [ 132.297750] mv2112_update_link: link 0x0 [ 132.297792] mv2112_read_status: autoneg is disabled [ 133.320699] mv2112_read_status [ 133.320998] mv2112_update_link: 3.0x901(1G): 0x80 [ 133.321276] mv2112_update_link: 3.0x8109(100M): 0x0 [ 133.321315] mv2112_update_link: link 0x0 [ 133.321352] mv2112_read_status: autoneg is disabled [ 133.934820] i2c_geni 980000.i2c: i2c error :-107 [ 133.939809] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 133.950885] i2c_geni 980000.i2c: i2c error :-107 [ 133.955749] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 134.215868] init: starting service 'qvrd_vndr'... [ 134.222025] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 134.227189] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 134.290079] init: starting service 'sxrd'... [ 134.336916] init: Service 'qvrd_vndr' (pid 3883) exited with status 1 [ 134.336979] init: Sending signal 9 to service 'qvrd_vndr' (pid 3883) process group... [ 134.337425] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3883 in 0ms [ 134.344490] mv2112_read_status [ 134.344744] mv2112_update_link: 3.0x901(1G): 0x80 [ 134.344979] mv2112_update_link: 3.0x8109(100M): 0x0 [ 134.344996] mv2112_update_link: link 0x0 [ 134.345013] mv2112_read_status: autoneg is disabled [ 134.370430] init: Service 'sxrd' (pid 3884) exited with status 1 [ 134.370503] init: Sending signal 9 to service 'sxrd' (pid 3884) process group... [ 134.371073] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3884 in 0ms [ 135.368656] mv2112_read_status [ 135.368996] mv2112_update_link: 3.0x901(1G): 0x80 [ 135.369295] mv2112_update_link: 3.0x8109(100M): 0x0 [ 135.369339] mv2112_update_link: link 0x0 [ 135.369381] mv2112_read_status: autoneg is disabled [ 135.978780] i2c_geni 980000.i2c: i2c error :-107 [ 135.984075] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 135.994971] i2c_geni 980000.i2c: i2c error :-107 [ 136.000001] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 136.392634] mv2112_read_status [ 136.393218] mv2112_update_link: 3.0x901(1G): 0x80 [ 136.393619] mv2112_update_link: 3.0x8109(100M): 0x0 [ 136.393663] mv2112_update_link: link 0x0 [ 136.393706] mv2112_read_status: autoneg is disabled [ 137.416601] mv2112_read_status [ 137.417352] mv2112_update_link: 3.0x901(1G): 0x80 [ 137.417653] mv2112_update_link: 3.0x8109(100M): 0x0 [ 137.417696] mv2112_update_link: link 0x0 [ 137.417738] mv2112_read_status: autoneg is disabled [ 138.027276] i2c_geni 980000.i2c: i2c error :-107 [ 138.033217] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 138.044952] i2c_geni 980000.i2c: i2c error :-107 [ 138.049878] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 138.440796] mv2112_read_status [ 138.441410] mv2112_update_link: 3.0x901(1G): 0x80 [ 138.441710] mv2112_update_link: 3.0x8109(100M): 0x0 [ 138.441766] mv2112_update_link: link 0x0 [ 138.441809] mv2112_read_status: autoneg is disabled [ 139.274907] init: starting service 'qvrd_vndr'... [ 139.283604] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 139.289845] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 139.343297] init: starting service 'sxrd'... [ 139.375838] init: Service 'qvrd_vndr' (pid 3886) exited with status 1 [ 139.375862] init: Sending signal 9 to service 'qvrd_vndr' (pid 3886) process group... [ 139.376047] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3886 in 0ms [ 139.421227] init: Service 'sxrd' (pid 3887) exited with status 1 [ 139.421248] init: Sending signal 9 to service 'sxrd' (pid 3887) process group... [ 139.421435] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3887 in 0ms [ 139.464989] mv2112_read_status [ 139.465335] mv2112_update_link: 3.0x901(1G): 0x80 [ 139.466017] mv2112_update_link: 3.0x8109(100M): 0x0 [ 139.466062] mv2112_update_link: link 0x0 [ 139.466110] mv2112_read_status: autoneg is disabled [ 140.075803] i2c_geni 980000.i2c: i2c error :-107 [ 140.080946] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 140.091742] i2c_geni 980000.i2c: i2c error :-107 [ 140.096943] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 140.489144] mv2112_read_status [ 140.489462] mv2112_update_link: 3.0x901(1G): 0x80 [ 140.490006] mv2112_update_link: 3.0x8109(100M): 0x0 [ 140.490061] mv2112_update_link: link 0x0 [ 140.490106] mv2112_read_status: autoneg is disabled [ 141.513151] mv2112_read_status [ 141.513493] mv2112_update_link: 3.0x901(1G): 0x80 [ 141.513802] mv2112_update_link: 3.0x8109(100M): 0x0 [ 141.513845] mv2112_update_link: link 0x0 [ 141.513887] mv2112_read_status: autoneg is disabled [ 142.124590] i2c_geni 980000.i2c: i2c error :-107 [ 142.129986] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 142.140842] i2c_geni 980000.i2c: i2c error :-107 [ 142.145826] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 142.536836] mv2112_read_status [ 142.537190] mv2112_update_link: 3.0x901(1G): 0x80 [ 142.537501] mv2112_update_link: 3.0x8109(100M): 0x0 [ 142.537544] mv2112_update_link: link 0x0 [ 142.537588] mv2112_read_status: autoneg is disabled [ 143.560831] mv2112_read_status [ 143.561148] mv2112_update_link: 3.0x901(1G): 0x80 [ 143.561457] mv2112_update_link: 3.0x8109(100M): 0x0 [ 143.561499] mv2112_update_link: link 0x0 [ 143.561542] mv2112_read_status: autoneg is disabled [ 144.171565] i2c_geni 980000.i2c: i2c error :-107 [ 144.176797] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 144.190096] i2c_geni 980000.i2c: i2c error :-107 [ 144.195330] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 144.330842] init: starting service 'qvrd_vndr'... [ 144.340651] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 144.348792] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 144.404173] init: starting service 'sxrd'... [ 144.424351] init: Service 'qvrd_vndr' (pid 3889) exited with status 1 [ 144.424378] init: Sending signal 9 to service 'qvrd_vndr' (pid 3889) process group... [ 144.424571] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3889 in 0ms [ 144.472321] init: Service 'sxrd' (pid 3890) exited with status 1 [ 144.472347] init: Sending signal 9 to service 'sxrd' (pid 3890) process group... [ 144.472579] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3890 in 0ms [ 144.584753] mv2112_read_status [ 144.585011] mv2112_update_link: 3.0x901(1G): 0x80 [ 144.585584] mv2112_update_link: 3.0x8109(100M): 0x0 [ 144.585602] mv2112_update_link: link 0x0 [ 144.585620] mv2112_read_status: autoneg is disabled [ 145.608857] mv2112_read_status [ 145.609586] mv2112_update_link: 3.0x901(1G): 0x80 [ 145.609925] mv2112_update_link: 3.0x8109(100M): 0x0 [ 145.609968] mv2112_update_link: link 0x0 [ 145.610011] mv2112_read_status: autoneg is disabled [ 146.220244] i2c_geni 980000.i2c: i2c error :-107 [ 146.226781] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 146.237893] i2c_geni 980000.i2c: i2c error :-107 [ 146.242813] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 146.633192] mv2112_read_status [ 146.633529] mv2112_update_link: 3.0x901(1G): 0x80 [ 146.633838] mv2112_update_link: 3.0x8109(100M): 0x0 [ 146.633881] mv2112_update_link: link 0x0 [ 146.633923] mv2112_read_status: autoneg is disabled [ 147.656505] mv2112_read_status [ 147.656756] mv2112_update_link: 3.0x901(1G): 0x80 [ 147.657290] mv2112_update_link: 3.0x8109(100M): 0x0 [ 147.657310] mv2112_update_link: link 0x0 [ 147.657328] mv2112_read_status: autoneg is disabled [ 148.266949] i2c_geni 980000.i2c: i2c error :-107 [ 148.273037] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 148.291164] i2c_geni 980000.i2c: i2c error :-107 [ 148.296082] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 148.681176] mv2112_read_status [ 148.681520] mv2112_update_link: 3.0x901(1G): 0x80 [ 148.682262] mv2112_update_link: 3.0x8109(100M): 0x0 [ 148.682307] mv2112_update_link: link 0x0 [ 148.682350] mv2112_read_status: autoneg is disabled [ 149.390818] init: starting service 'qvrd_vndr'... [ 149.399011] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 149.405856] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 149.460849] init: starting service 'sxrd'... [ 149.483260] init: Service 'qvrd_vndr' (pid 3892) exited with status 1 [ 149.483287] init: Sending signal 9 to service 'qvrd_vndr' (pid 3892) process group... [ 149.483489] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3892 in 0ms [ 149.539398] init: Service 'sxrd' (pid 3893) exited with status 1 [ 149.539442] init: Sending signal 9 to service 'sxrd' (pid 3893) process group... [ 149.539779] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3893 in 0ms [ 149.704855] mv2112_read_status [ 149.705214] mv2112_update_link: 3.0x901(1G): 0x80 [ 149.705523] mv2112_update_link: 3.0x8109(100M): 0x0 [ 149.705567] mv2112_update_link: link 0x0 [ 149.705609] mv2112_read_status: autoneg is disabled [ 150.316489] i2c_geni 980000.i2c: i2c error :-107 [ 150.321844] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 150.332771] i2c_geni 980000.i2c: i2c error :-107 [ 150.337666] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 150.729243] mv2112_read_status [ 150.729857] mv2112_update_link: 3.0x901(1G): 0x80 [ 150.730169] mv2112_update_link: 3.0x8109(100M): 0x0 [ 150.730213] mv2112_update_link: link 0x0 [ 150.730256] mv2112_read_status: autoneg is disabled [ 151.752707] mv2112_read_status [ 151.753060] mv2112_update_link: 3.0x901(1G): 0x80 [ 151.753370] mv2112_update_link: 3.0x8109(100M): 0x0 [ 151.753414] mv2112_update_link: link 0x0 [ 151.753458] mv2112_read_status: autoneg is disabled [ 152.366417] i2c_geni 980000.i2c: i2c error :-107 [ 152.371578] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 152.385639] i2c_geni 980000.i2c: i2c error :-107 [ 152.390770] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 152.776960] mv2112_read_status [ 152.777281] mv2112_update_link: 3.0x901(1G): 0x80 [ 152.777588] mv2112_update_link: 3.0x8109(100M): 0x0 [ 152.777631] mv2112_update_link: link 0x0 [ 152.777673] mv2112_read_status: autoneg is disabled [ 153.800933] mv2112_read_status [ 153.801253] mv2112_update_link: 3.0x901(1G): 0x80 [ 153.802065] mv2112_update_link: 3.0x8109(100M): 0x0 [ 153.802123] mv2112_update_link: link 0x0 [ 153.802167] mv2112_read_status: autoneg is disabled [ 154.412647] i2c_geni 980000.i2c: i2c error :-107 [ 154.417804] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 154.428867] i2c_geni 980000.i2c: i2c error :-107 [ 154.433863] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 154.445857] init: starting service 'qvrd_vndr'... [ 154.452245] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 154.458329] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 154.517300] init: starting service 'sxrd'... [ 154.542397] init: Service 'qvrd_vndr' (pid 3895) exited with status 1 [ 154.542426] init: Sending signal 9 to service 'qvrd_vndr' (pid 3895) process group... [ 154.542658] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3895 in 0ms [ 154.593500] init: Service 'sxrd' (pid 3896) exited with status 1 [ 154.593526] init: Sending signal 9 to service 'sxrd' (pid 3896) process group... [ 154.593722] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3896 in 0ms [ 154.824693] mv2112_read_status [ 154.825047] mv2112_update_link: 3.0x901(1G): 0x80 [ 154.825357] mv2112_update_link: 3.0x8109(100M): 0x0 [ 154.825401] mv2112_update_link: link 0x0 [ 154.825443] mv2112_read_status: autoneg is disabled [ 155.849192] mv2112_read_status [ 155.849509] mv2112_update_link: 3.0x901(1G): 0x80 [ 155.850248] mv2112_update_link: 3.0x8109(100M): 0x0 [ 155.850304] mv2112_update_link: link 0x0 [ 155.850351] mv2112_read_status: autoneg is disabled [ 156.460943] i2c_geni 980000.i2c: i2c error :-107 [ 156.466071] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 156.477691] i2c_geni 980000.i2c: i2c error :-107 [ 156.482739] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 156.873248] mv2112_read_status [ 156.873607] mv2112_update_link: 3.0x901(1G): 0x80 [ 156.873936] mv2112_update_link: 3.0x8109(100M): 0x0 [ 156.873979] mv2112_update_link: link 0x0 [ 156.874021] mv2112_read_status: autoneg is disabled [ 157.896659] mv2112_read_status [ 157.897023] mv2112_update_link: 3.0x901(1G): 0x80 [ 157.897334] mv2112_update_link: 3.0x8109(100M): 0x0 [ 157.897378] mv2112_update_link: link 0x0 [ 157.897421] mv2112_read_status: autoneg is disabled [ 158.508165] i2c_geni 980000.i2c: i2c error :-107 [ 158.513518] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 158.524561] i2c_geni 980000.i2c: i2c error :-107 [ 158.529513] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 158.920622] mv2112_read_status [ 158.920950] mv2112_update_link: 3.0x901(1G): 0x80 [ 158.921259] mv2112_update_link: 3.0x8109(100M): 0x0 [ 158.921302] mv2112_update_link: link 0x0 [ 158.921345] mv2112_read_status: autoneg is disabled [ 159.502196] init: starting service 'qvrd_vndr'... [ 159.506039] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 159.509205] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 159.555166] init: starting service 'sxrd'... [ 159.606737] init: Service 'qvrd_vndr' (pid 3898) exited with status 1 [ 159.606844] init: Sending signal 9 to service 'qvrd_vndr' (pid 3898) process group... [ 159.607638] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3898 in 0ms [ 159.616752] init: Service 'sxrd' (pid 3899) exited with status 1 [ 159.616842] init: Sending signal 9 to service 'sxrd' (pid 3899) process group... [ 159.617584] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3899 in 0ms [ 159.944512] mv2112_read_status [ 159.944785] mv2112_update_link: 3.0x901(1G): 0x80 [ 159.945029] mv2112_update_link: 3.0x8109(100M): 0x0 [ 159.945048] mv2112_update_link: link 0x0 [ 159.945067] mv2112_read_status: autoneg is disabled [ 159.974128] perf: interrupt took too long (2514 > 2500), lowering kernel.perf_event_max_sample_rate to 79500 [ 160.553771] i2c_geni 980000.i2c: i2c error :-107 [ 160.558871] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 160.569062] i2c_geni 980000.i2c: i2c error :-107 [ 160.574089] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 160.968664] mv2112_read_status [ 160.968953] mv2112_update_link: 3.0x901(1G): 0x80 [ 160.969212] mv2112_update_link: 3.0x8109(100M): 0x0 [ 160.969239] mv2112_update_link: link 0x0 [ 160.969266] mv2112_read_status: autoneg is disabled [ 161.992682] mv2112_read_status [ 161.992975] mv2112_update_link: 3.0x901(1G): 0x80 [ 161.993416] mv2112_update_link: 3.0x8109(100M): 0x0 [ 161.993445] mv2112_update_link: link 0x0 [ 161.993472] mv2112_read_status: autoneg is disabled [ 162.602052] i2c_geni 980000.i2c: i2c error :-107 [ 162.606998] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 162.619976] i2c_geni 980000.i2c: i2c error :-107 [ 162.625543] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 163.016516] mv2112_read_status [ 163.016778] mv2112_update_link: 3.0x901(1G): 0x80 [ 163.017072] mv2112_update_link: 3.0x8109(100M): 0x0 [ 163.017090] mv2112_update_link: link 0x0 [ 163.017108] mv2112_read_status: autoneg is disabled [ 164.040555] mv2112_read_status [ 164.040834] mv2112_update_link: 3.0x901(1G): 0x80 [ 164.041078] mv2112_update_link: 3.0x8109(100M): 0x0 [ 164.041102] mv2112_update_link: link 0x0 [ 164.041124] mv2112_read_status: autoneg is disabled [ 164.542934] init: starting service 'qvrd_vndr'... [ 164.547484] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 164.551592] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 164.597806] init: starting service 'sxrd'... [ 164.634061] init: Service 'qvrd_vndr' (pid 3901) exited with status 1 [ 164.634094] init: Sending signal 9 to service 'qvrd_vndr' (pid 3901) process group... [ 164.634335] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3901 in 0ms [ 164.650163] i2c_geni 980000.i2c: i2c error :-107 [ 164.655090] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 164.657550] init: Service 'sxrd' (pid 3902) exited with status 1 [ 164.666471] init: Sending signal 9 to service 'sxrd' (pid 3902) process group... [ 164.666682] i2c_geni 980000.i2c: i2c error :-107 [ 164.667148] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3902 in 0ms [ 164.671932] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 165.064829] mv2112_read_status [ 165.065180] mv2112_update_link: 3.0x901(1G): 0x80 [ 165.065501] mv2112_update_link: 3.0x8109(100M): 0x0 [ 165.065546] mv2112_update_link: link 0x0 [ 165.065590] mv2112_read_status: autoneg is disabled [ 166.089143] mv2112_read_status [ 166.089474] mv2112_update_link: 3.0x901(1G): 0x80 [ 166.089782] mv2112_update_link: 3.0x8109(100M): 0x0 [ 166.089826] mv2112_update_link: link 0x0 [ 166.089868] mv2112_read_status: autoneg is disabled [ 166.699806] i2c_geni 980000.i2c: i2c error :-107 [ 166.704948] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 166.715946] i2c_geni 980000.i2c: i2c error :-107 [ 166.720815] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 167.112656] mv2112_read_status [ 167.112997] mv2112_update_link: 3.0x901(1G): 0x80 [ 167.113306] mv2112_update_link: 3.0x8109(100M): 0x0 [ 167.113349] mv2112_update_link: link 0x0 [ 167.113392] mv2112_read_status: autoneg is disabled [ 168.137292] mv2112_read_status [ 168.137663] mv2112_update_link: 3.0x901(1G): 0x80 [ 168.138003] mv2112_update_link: 3.0x8109(100M): 0x0 [ 168.138047] mv2112_update_link: link 0x0 [ 168.138089] mv2112_read_status: autoneg is disabled [ 168.748226] i2c_geni 980000.i2c: i2c error :-107 [ 168.753595] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 168.764653] i2c_geni 980000.i2c: i2c error :-107 [ 168.769764] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 169.160632] mv2112_read_status [ 169.160917] mv2112_update_link: 3.0x901(1G): 0x80 [ 169.161188] mv2112_update_link: 3.0x8109(100M): 0x0 [ 169.161221] mv2112_update_link: link 0x0 [ 169.161254] mv2112_read_status: autoneg is disabled [ 169.587712] init: starting service 'qvrd_vndr'... [ 169.595845] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 169.606654] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 169.661779] init: starting service 'sxrd'... [ 169.695841] init: Service 'qvrd_vndr' (pid 3906) exited with status 1 [ 169.695875] init: Sending signal 9 to service 'qvrd_vndr' (pid 3906) process group... [ 169.696090] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3906 in 0ms [ 169.720911] init: Service 'sxrd' (pid 3907) exited with status 1 [ 169.721000] init: Sending signal 9 to service 'sxrd' (pid 3907) process group... [ 169.721743] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3907 in 0ms [ 170.184863] mv2112_read_status [ 170.185219] mv2112_update_link: 3.0x901(1G): 0x80 [ 170.185530] mv2112_update_link: 3.0x8109(100M): 0x0 [ 170.185574] mv2112_update_link: link 0x0 [ 170.185616] mv2112_read_status: autoneg is disabled [ 170.797120] i2c_geni 980000.i2c: i2c error :-107 [ 170.802235] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 170.815656] i2c_geni 980000.i2c: i2c error :-107 [ 170.821104] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 171.209162] mv2112_read_status [ 171.209480] mv2112_update_link: 3.0x901(1G): 0x80 [ 171.209788] mv2112_update_link: 3.0x8109(100M): 0x0 [ 171.209832] mv2112_update_link: link 0x0 [ 171.209873] mv2112_read_status: autoneg is disabled [ 172.232813] mv2112_read_status [ 172.233133] mv2112_update_link: 3.0x901(1G): 0x80 [ 172.233441] mv2112_update_link: 3.0x8109(100M): 0x0 [ 172.233484] mv2112_update_link: link 0x0 [ 172.233526] mv2112_read_status: autoneg is disabled [ 172.843499] i2c_geni 980000.i2c: i2c error :-107 [ 172.850676] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 172.863940] i2c_geni 980000.i2c: i2c error :-107 [ 172.869160] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 173.256845] mv2112_read_status [ 173.257207] mv2112_update_link: 3.0x901(1G): 0x80 [ 173.257528] mv2112_update_link: 3.0x8109(100M): 0x0 [ 173.257572] mv2112_update_link: link 0x0 [ 173.257614] mv2112_read_status: autoneg is disabled [ 174.280444] mv2112_read_status [ 174.280706] mv2112_update_link: 3.0x901(1G): 0x80 [ 174.280944] mv2112_update_link: 3.0x8109(100M): 0x0 [ 174.280962] mv2112_update_link: link 0x0 [ 174.280980] mv2112_read_status: autoneg is disabled [ 174.647635] init: starting service 'qvrd_vndr'... [ 174.656120] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 174.664768] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 174.720701] init: starting service 'sxrd'... [ 174.758899] init: Service 'qvrd_vndr' (pid 3909) exited with status 1 [ 174.758929] init: Sending signal 9 to service 'qvrd_vndr' (pid 3909) process group... [ 174.759144] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3909 in 0ms [ 174.796760] init: Service 'sxrd' (pid 3910) exited with status 1 [ 174.796857] init: Sending signal 9 to service 'sxrd' (pid 3910) process group... [ 174.797615] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3910 in 0ms [ 174.895472] i2c_geni 980000.i2c: i2c error :-107 [ 174.900521] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 174.911360] i2c_geni 980000.i2c: i2c error :-107 [ 174.916374] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 175.304809] mv2112_read_status [ 175.305154] mv2112_update_link: 3.0x901(1G): 0x80 [ 175.305475] mv2112_update_link: 3.0x8109(100M): 0x0 [ 175.305519] mv2112_update_link: link 0x0 [ 175.305563] mv2112_read_status: autoneg is disabled [ 176.329217] mv2112_read_status [ 176.329583] mv2112_update_link: 3.0x901(1G): 0x80 [ 176.329902] mv2112_update_link: 3.0x8109(100M): 0x0 [ 176.329945] mv2112_update_link: link 0x0 [ 176.329989] mv2112_read_status: autoneg is disabled [ 176.939989] i2c_geni 980000.i2c: i2c error :-107 [ 176.947274] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 176.958614] i2c_geni 980000.i2c: i2c error :-107 [ 176.964186] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 177.353171] mv2112_read_status [ 177.353488] mv2112_update_link: 3.0x901(1G): 0x80 [ 177.353796] mv2112_update_link: 3.0x8109(100M): 0x0 [ 177.353839] mv2112_update_link: link 0x0 [ 177.353882] mv2112_read_status: autoneg is disabled [ 178.376913] mv2112_read_status [ 178.377252] mv2112_update_link: 3.0x901(1G): 0x80 [ 178.377580] mv2112_update_link: 3.0x8109(100M): 0x0 [ 178.377624] mv2112_update_link: link 0x0 [ 178.377666] mv2112_read_status: autoneg is disabled [ 178.989020] i2c_geni 980000.i2c: i2c error :-107 [ 178.994433] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 179.005075] i2c_geni 980000.i2c: i2c error :-107 [ 179.010123] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 179.400660] mv2112_read_status [ 179.401004] mv2112_update_link: 3.0x901(1G): 0x80 [ 179.401770] mv2112_update_link: 3.0x8109(100M): 0x0 [ 179.401818] mv2112_update_link: link 0x0 [ 179.401853] mv2112_read_status: autoneg is disabled [ 179.707309] init: starting service 'qvrd_vndr'... [ 179.715532] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 179.723391] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 179.781579] init: starting service 'sxrd'... [ 179.803110] init: Service 'qvrd_vndr' (pid 3912) exited with status 1 [ 179.803145] init: Sending signal 9 to service 'qvrd_vndr' (pid 3912) process group... [ 179.803398] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3912 in 0ms [ 179.854687] init: Service 'sxrd' (pid 3913) exited with status 1 [ 179.854715] init: Sending signal 9 to service 'sxrd' (pid 3913) process group... [ 179.854919] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3913 in 0ms [ 180.424860] mv2112_read_status [ 180.425212] mv2112_update_link: 3.0x901(1G): 0x80 [ 180.425523] mv2112_update_link: 3.0x8109(100M): 0x0 [ 180.425566] mv2112_update_link: link 0x0 [ 180.425610] mv2112_read_status: autoneg is disabled [ 181.034789] i2c_geni 980000.i2c: i2c error :-107 [ 181.039744] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 181.050508] i2c_geni 980000.i2c: i2c error :-107 [ 181.055875] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 181.448977] mv2112_read_status [ 181.449307] mv2112_update_link: 3.0x901(1G): 0x80 [ 181.449615] mv2112_update_link: 3.0x8109(100M): 0x0 [ 181.449660] mv2112_update_link: link 0x0 [ 181.449702] mv2112_read_status: autoneg is disabled [ 182.472928] mv2112_read_status [ 182.473283] mv2112_update_link: 3.0x901(1G): 0x80 [ 182.473592] mv2112_update_link: 3.0x8109(100M): 0x0 [ 182.473636] mv2112_update_link: link 0x0 [ 182.473678] mv2112_read_status: autoneg is disabled [ 183.084014] i2c_geni 980000.i2c: i2c error :-107 [ 183.089016] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 183.099518] i2c_geni 980000.i2c: i2c error :-107 [ 183.104435] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 183.497144] mv2112_read_status [ 183.497458] mv2112_update_link: 3.0x901(1G): 0x80 [ 183.497765] mv2112_update_link: 3.0x8109(100M): 0x0 [ 183.497808] mv2112_update_link: link 0x0 [ 183.497850] mv2112_read_status: autoneg is disabled [ 184.520620] mv2112_read_status [ 184.521391] mv2112_update_link: 3.0x901(1G): 0x80 [ 184.521711] mv2112_update_link: 3.0x8109(100M): 0x0 [ 184.521754] mv2112_update_link: link 0x0 [ 184.521798] mv2112_read_status: autoneg is disabled [ 184.768244] init: starting service 'qvrd_vndr'... [ 184.776584] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 184.783833] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 184.840791] init: starting service 'sxrd'... [ 184.863626] init: Service 'qvrd_vndr' (pid 3915) exited with status 1 [ 184.863666] init: Sending signal 9 to service 'qvrd_vndr' (pid 3915) process group... [ 184.863916] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3915 in 0ms [ 184.914065] init: Service 'sxrd' (pid 3916) exited with status 1 [ 184.914091] init: Sending signal 9 to service 'sxrd' (pid 3916) process group... [ 184.914287] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3916 in 0ms [ 185.132701] i2c_geni 980000.i2c: i2c error :-107 [ 185.138311] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 185.149819] i2c_geni 980000.i2c: i2c error :-107 [ 185.154826] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 185.544809] mv2112_read_status [ 185.545159] mv2112_update_link: 3.0x901(1G): 0x80 [ 185.545858] mv2112_update_link: 3.0x8109(100M): 0x0 [ 185.545903] mv2112_update_link: link 0x0 [ 185.545946] mv2112_read_status: autoneg is disabled [ 186.569007] mv2112_read_status [ 186.569325] mv2112_update_link: 3.0x901(1G): 0x80 [ 186.569633] mv2112_update_link: 3.0x8109(100M): 0x0 [ 186.569676] mv2112_update_link: link 0x0 [ 186.569719] mv2112_read_status: autoneg is disabled [ 187.181208] i2c_geni 980000.i2c: i2c error :-107 [ 187.186879] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 187.198746] i2c_geni 980000.i2c: i2c error :-107 [ 187.203752] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 187.593175] mv2112_read_status [ 187.593495] mv2112_update_link: 3.0x901(1G): 0x80 [ 187.594199] mv2112_update_link: 3.0x8109(100M): 0x0 [ 187.594242] mv2112_update_link: link 0x0 [ 187.594284] mv2112_read_status: autoneg is disabled [ 188.616736] mv2112_read_status [ 188.617104] mv2112_update_link: 3.0x901(1G): 0x80 [ 188.617415] mv2112_update_link: 3.0x8109(100M): 0x0 [ 188.617460] mv2112_update_link: link 0x0 [ 188.617503] mv2112_read_status: autoneg is disabled [ 189.230460] i2c_geni 980000.i2c: i2c error :-107 [ 189.235570] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 189.246826] i2c_geni 980000.i2c: i2c error :-107 [ 189.251772] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 189.640707] mv2112_read_status [ 189.641589] mv2112_update_link: 3.0x901(1G): 0x80 [ 189.641900] mv2112_update_link: 3.0x8109(100M): 0x0 [ 189.641948] mv2112_update_link: link 0x0 [ 189.641993] mv2112_read_status: autoneg is disabled [ 189.827597] init: starting service 'qvrd_vndr'... [ 189.836670] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 189.843367] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 189.901433] init: starting service 'sxrd'... [ 189.922871] init: Service 'qvrd_vndr' (pid 3918) exited with status 1 [ 189.922897] init: Sending signal 9 to service 'qvrd_vndr' (pid 3918) process group... [ 189.923085] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3918 in 0ms [ 189.974146] init: Service 'sxrd' (pid 3919) exited with status 1 [ 189.974172] init: Sending signal 9 to service 'sxrd' (pid 3919) process group... [ 189.974382] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3919 in 0ms [ 190.664978] mv2112_read_status [ 190.665793] mv2112_update_link: 3.0x901(1G): 0x80 [ 190.666107] mv2112_update_link: 3.0x8109(100M): 0x0 [ 190.666152] mv2112_update_link: link 0x0 [ 190.666196] mv2112_read_status: autoneg is disabled [ 191.275095] i2c_geni 980000.i2c: i2c error :-107 [ 191.281096] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 191.293668] i2c_geni 980000.i2c: i2c error :-107 [ 191.298654] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 191.689150] mv2112_read_status [ 191.689503] mv2112_update_link: 3.0x901(1G): 0x80 [ 191.689810] mv2112_update_link: 3.0x8109(100M): 0x0 [ 191.689854] mv2112_update_link: link 0x0 [ 191.689897] mv2112_read_status: autoneg is disabled [ 192.712628] mv2112_read_status [ 192.712945] mv2112_update_link: 3.0x901(1G): 0x80 [ 192.713273] mv2112_update_link: 3.0x8109(100M): 0x0 [ 192.713316] mv2112_update_link: link 0x0 [ 192.713359] mv2112_read_status: autoneg is disabled [ 193.323463] i2c_geni 980000.i2c: i2c error :-107 [ 193.328989] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 193.340978] i2c_geni 980000.i2c: i2c error :-107 [ 193.346448] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 193.736663] mv2112_read_status [ 193.736986] mv2112_update_link: 3.0x901(1G): 0x80 [ 193.737294] mv2112_update_link: 3.0x8109(100M): 0x0 [ 193.737337] mv2112_update_link: link 0x0 [ 193.737379] mv2112_read_status: autoneg is disabled [ 194.760675] mv2112_read_status [ 194.761038] mv2112_update_link: 3.0x901(1G): 0x80 [ 194.761368] mv2112_update_link: 3.0x8109(100M): 0x0 [ 194.761413] mv2112_update_link: link 0x0 [ 194.761456] mv2112_read_status: autoneg is disabled [ 194.888032] init: starting service 'qvrd_vndr'... [ 194.900666] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 194.907044] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 194.961351] init: starting service 'sxrd'... [ 194.982658] init: Service 'qvrd_vndr' (pid 3921) exited with status 1 [ 194.982685] init: Sending signal 9 to service 'qvrd_vndr' (pid 3921) process group... [ 194.982923] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3921 in 0ms [ 195.034979] init: Service 'sxrd' (pid 3922) exited with status 1 [ 195.035007] init: Sending signal 9 to service 'sxrd' (pid 3922) process group... [ 195.035223] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3922 in 0ms [ 195.372030] i2c_geni 980000.i2c: i2c error :-107 [ 195.377376] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 195.389094] i2c_geni 980000.i2c: i2c error :-107 [ 195.394047] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 195.784636] mv2112_read_status [ 195.785043] mv2112_update_link: 3.0x901(1G): 0x80 [ 195.785365] mv2112_update_link: 3.0x8109(100M): 0x0 [ 195.785408] mv2112_update_link: link 0x0 [ 195.785451] mv2112_read_status: autoneg is disabled [ 196.809316] mv2112_read_status [ 196.809653] mv2112_update_link: 3.0x901(1G): 0x80 [ 196.809990] mv2112_update_link: 3.0x8109(100M): 0x0 [ 196.810034] mv2112_update_link: link 0x0 [ 196.810076] mv2112_read_status: autoneg is disabled [ 197.420041] i2c_geni 980000.i2c: i2c error :-107 [ 197.425395] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 197.437128] i2c_geni 980000.i2c: i2c error :-107 [ 197.442073] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 197.832669] mv2112_read_status [ 197.833023] mv2112_update_link: 3.0x901(1G): 0x80 [ 197.833352] mv2112_update_link: 3.0x8109(100M): 0x0 [ 197.833396] mv2112_update_link: link 0x0 [ 197.833438] mv2112_read_status: autoneg is disabled [ 198.856661] mv2112_read_status [ 198.856978] mv2112_update_link: 3.0x901(1G): 0x80 [ 198.857285] mv2112_update_link: 3.0x8109(100M): 0x0 [ 198.857328] mv2112_update_link: link 0x0 [ 198.857370] mv2112_read_status: autoneg is disabled [ 199.469264] i2c_geni 980000.i2c: i2c error :-107 [ 199.474362] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 199.486458] i2c_geni 980000.i2c: i2c error :-107 [ 199.491427] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 199.880659] mv2112_read_status [ 199.881020] mv2112_update_link: 3.0x901(1G): 0x80 [ 199.881331] mv2112_update_link: 3.0x8109(100M): 0x0 [ 199.881375] mv2112_update_link: link 0x0 [ 199.881418] mv2112_read_status: autoneg is disabled [ 199.947064] init: starting service 'qvrd_vndr'... [ 199.952195] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 199.956013] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 200.009701] init: starting service 'sxrd'... [ 200.046799] init: Service 'qvrd_vndr' (pid 3924) exited with status 1 [ 200.046840] init: Sending signal 9 to service 'qvrd_vndr' (pid 3924) process group... [ 200.047131] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3924 in 0ms [ 200.057507] init: Service 'sxrd' (pid 3925) exited with status 1 [ 200.057580] init: Sending signal 9 to service 'sxrd' (pid 3925) process group... [ 200.058274] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3925 in 0ms [ 200.904904] mv2112_read_status [ 200.905257] mv2112_update_link: 3.0x901(1G): 0x80 [ 200.905595] mv2112_update_link: 3.0x8109(100M): 0x0 [ 200.905639] mv2112_update_link: link 0x0 [ 200.905682] mv2112_read_status: autoneg is disabled [ 201.516497] i2c_geni 980000.i2c: i2c error :-107 [ 201.521834] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 201.533871] i2c_geni 980000.i2c: i2c error :-107 [ 201.538734] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 201.929190] mv2112_read_status [ 201.929513] mv2112_update_link: 3.0x901(1G): 0x80 [ 201.929821] mv2112_update_link: 3.0x8109(100M): 0x0 [ 201.929865] mv2112_update_link: link 0x0 [ 201.929907] mv2112_read_status: autoneg is disabled [ 202.952838] mv2112_read_status [ 202.953162] mv2112_update_link: 3.0x901(1G): 0x80 [ 202.953470] mv2112_update_link: 3.0x8109(100M): 0x0 [ 202.953513] mv2112_update_link: link 0x0 [ 202.953555] mv2112_read_status: autoneg is disabled [ 203.565539] i2c_geni 980000.i2c: i2c error :-107 [ 203.574361] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 203.588037] i2c_geni 980000.i2c: i2c error :-107 [ 203.595600] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 203.976684] mv2112_read_status [ 203.977058] mv2112_update_link: 3.0x901(1G): 0x80 [ 203.977367] mv2112_update_link: 3.0x8109(100M): 0x0 [ 203.977411] mv2112_update_link: link 0x0 [ 203.977453] mv2112_read_status: autoneg is disabled [ 204.995170] init: starting service 'qvrd_vndr'... [ 205.000553] mv2112_read_status [ 205.000854] mv2112_update_link: 3.0x901(1G): 0x80 [ 205.001137] mv2112_update_link: 3.0x8109(100M): 0x0 [ 205.001169] mv2112_update_link: link 0x0 [ 205.001200] mv2112_read_status: autoneg is disabled [ 205.008967] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 205.017605] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 205.073800] init: starting service 'sxrd'... [ 205.124770] init: Service 'qvrd_vndr' (pid 3927) exited with status 1 [ 205.124988] init: Sending signal 9 to service 'qvrd_vndr' (pid 3927) process group... [ 205.126863] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3927 in 1ms [ 205.140521] init: Service 'sxrd' (pid 3928) exited with status 1 [ 205.141430] init: Sending signal 9 to service 'sxrd' (pid 3928) process group... [ 205.142832] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3928 in 1ms [ 205.612846] i2c_geni 980000.i2c: i2c error :-107 [ 205.617972] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 205.629600] i2c_geni 980000.i2c: i2c error :-107 [ 205.634626] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 206.024416] mv2112_read_status [ 206.024664] mv2112_update_link: 3.0x901(1G): 0x80 [ 206.024899] mv2112_update_link: 3.0x8109(100M): 0x0 [ 206.024917] mv2112_update_link: link 0x0 [ 206.024934] mv2112_read_status: autoneg is disabled [ 207.048806] mv2112_read_status [ 207.049123] mv2112_update_link: 3.0x901(1G): 0x80 [ 207.049412] mv2112_update_link: 3.0x8109(100M): 0x0 [ 207.049444] mv2112_update_link: link 0x0 [ 207.049476] mv2112_read_status: autoneg is disabled [ 207.660117] i2c_geni 980000.i2c: i2c error :-107 [ 207.665455] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 207.676465] i2c_geni 980000.i2c: i2c error :-107 [ 207.681484] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 208.072599] mv2112_read_status [ 208.072867] mv2112_update_link: 3.0x901(1G): 0x80 [ 208.073124] mv2112_update_link: 3.0x8109(100M): 0x0 [ 208.073149] mv2112_update_link: link 0x0 [ 208.073172] mv2112_read_status: autoneg is disabled [ 209.096550] mv2112_read_status [ 209.096828] mv2112_update_link: 3.0x901(1G): 0x80 [ 209.097096] mv2112_update_link: 3.0x8109(100M): 0x0 [ 209.097129] mv2112_update_link: link 0x0 [ 209.097162] mv2112_read_status: autoneg is disabled [ 209.705863] i2c_geni 980000.i2c: i2c error :-107 [ 209.712061] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 209.723292] i2c_geni 980000.i2c: i2c error :-107 [ 209.728884] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 210.061902] init: starting service 'qvrd_vndr'... [ 210.069120] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 210.076799] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 210.120523] mv2112_read_status [ 210.121124] mv2112_update_link: 3.0x901(1G): 0x80 [ 210.121372] mv2112_update_link: 3.0x8109(100M): 0x0 [ 210.121392] mv2112_update_link: link 0x0 [ 210.121411] mv2112_read_status: autoneg is disabled [ 210.135435] init: starting service 'sxrd'... [ 210.161153] init: Service 'qvrd_vndr' (pid 3930) exited with status 1 [ 210.161181] init: Sending signal 9 to service 'qvrd_vndr' (pid 3930) process group... [ 210.161380] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3930 in 0ms [ 210.220043] init: Service 'sxrd' (pid 3931) exited with status 1 [ 210.220085] init: Sending signal 9 to service 'sxrd' (pid 3931) process group... [ 210.220632] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3931 in 0ms [ 211.144507] mv2112_read_status [ 211.144855] mv2112_update_link: 3.0x901(1G): 0x80 [ 211.145174] mv2112_update_link: 3.0x8109(100M): 0x0 [ 211.145218] mv2112_update_link: link 0x0 [ 211.145262] mv2112_read_status: autoneg is disabled [ 211.755664] i2c_geni 980000.i2c: i2c error :-107 [ 211.761544] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 211.772924] i2c_geni 980000.i2c: i2c error :-107 [ 211.778090] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 212.168826] mv2112_read_status [ 212.169162] mv2112_update_link: 3.0x901(1G): 0x80 [ 212.169467] mv2112_update_link: 3.0x8109(100M): 0x0 [ 212.169511] mv2112_update_link: link 0x0 [ 212.169553] mv2112_read_status: autoneg is disabled [ 213.193177] mv2112_read_status [ 213.193499] mv2112_update_link: 3.0x901(1G): 0x80 [ 213.193845] mv2112_update_link: 3.0x8109(100M): 0x0 [ 213.193889] mv2112_update_link: link 0x0 [ 213.193931] mv2112_read_status: autoneg is disabled [ 213.804618] i2c_geni 980000.i2c: i2c error :-107 [ 213.809982] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 213.820615] i2c_geni 980000.i2c: i2c error :-107 [ 213.825733] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 214.216623] mv2112_read_status [ 214.216943] mv2112_update_link: 3.0x901(1G): 0x80 [ 214.217251] mv2112_update_link: 3.0x8109(100M): 0x0 [ 214.217294] mv2112_update_link: link 0x0 [ 214.217338] mv2112_read_status: autoneg is disabled [ 215.122498] init: starting service 'qvrd_vndr'... [ 215.131747] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 215.139150] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 215.202014] init: starting service 'sxrd'... [ 215.238933] init: Service 'qvrd_vndr' (pid 3933) exited with status 1 [ 215.238964] init: Sending signal 9 to service 'qvrd_vndr' (pid 3933) process group... [ 215.239181] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3933 in 0ms [ 215.244366] mv2112_read_status [ 215.244619] mv2112_update_link: 3.0x901(1G): 0x80 [ 215.244859] mv2112_update_link: 3.0x8109(100M): 0x0 [ 215.244876] mv2112_update_link: link 0x0 [ 215.244893] mv2112_read_status: autoneg is disabled [ 215.274771] init: Service 'sxrd' (pid 3934) exited with status 1 [ 215.274860] init: Sending signal 9 to service 'sxrd' (pid 3934) process group... [ 215.275508] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3934 in 0ms [ 215.853086] i2c_geni 980000.i2c: i2c error :-107 [ 215.858390] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 215.869934] i2c_geni 980000.i2c: i2c error :-107 [ 215.874945] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 216.264821] mv2112_read_status [ 216.265178] mv2112_update_link: 3.0x901(1G): 0x80 [ 216.265489] mv2112_update_link: 3.0x8109(100M): 0x0 [ 216.265533] mv2112_update_link: link 0x0 [ 216.265576] mv2112_read_status: autoneg is disabled [ 217.288966] mv2112_read_status [ 217.289282] mv2112_update_link: 3.0x901(1G): 0x80 [ 217.289619] mv2112_update_link: 3.0x8109(100M): 0x0 [ 217.289662] mv2112_update_link: link 0x0 [ 217.289704] mv2112_read_status: autoneg is disabled [ 217.899616] i2c_geni 980000.i2c: i2c error :-107 [ 217.904916] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 217.919786] i2c_geni 980000.i2c: i2c error :-107 [ 217.924948] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 218.312625] mv2112_read_status [ 218.312962] mv2112_update_link: 3.0x901(1G): 0x80 [ 218.313269] mv2112_update_link: 3.0x8109(100M): 0x0 [ 218.313313] mv2112_update_link: link 0x0 [ 218.313356] mv2112_read_status: autoneg is disabled [ 219.336502] mv2112_read_status [ 219.336765] mv2112_update_link: 3.0x901(1G): 0x80 [ 219.337003] mv2112_update_link: 3.0x8109(100M): 0x0 [ 219.337154] mv2112_update_link: link 0x0 [ 219.337171] mv2112_read_status: autoneg is disabled [ 219.946792] i2c_geni 980000.i2c: i2c error :-107 [ 219.951782] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 219.963117] i2c_geni 980000.i2c: i2c error :-107 [ 219.968146] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 220.184031] init: starting service 'qvrd_vndr'... [ 220.187782] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 220.191537] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 220.235937] init: starting service 'sxrd'... [ 220.270685] init: Service 'qvrd_vndr' (pid 3936) exited with status 1 [ 220.270717] init: Sending signal 9 to service 'qvrd_vndr' (pid 3936) process group... [ 220.270939] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3936 in 0ms [ 220.298458] init: Service 'sxrd' (pid 3937) exited with status 1 [ 220.298548] init: Sending signal 9 to service 'sxrd' (pid 3937) process group... [ 220.299212] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3937 in 0ms [ 220.360683] mv2112_read_status [ 220.360940] mv2112_update_link: 3.0x901(1G): 0x80 [ 220.361178] mv2112_update_link: 3.0x8109(100M): 0x0 [ 220.361195] mv2112_update_link: link 0x0 [ 220.361214] mv2112_read_status: autoneg is disabled [ 221.384834] mv2112_read_status [ 221.385110] mv2112_update_link: 3.0x901(1G): 0x80 [ 221.386169] mv2112_update_link: 3.0x8109(100M): 0x0 [ 221.386191] mv2112_update_link: link 0x0 [ 221.386212] mv2112_read_status: autoneg is disabled [ 222.000611] i2c_geni 980000.i2c: i2c error :-107 [ 222.007146] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 222.018303] i2c_geni 980000.i2c: i2c error :-107 [ 222.023952] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 222.417132] mv2112_read_status [ 222.417413] mv2112_update_link: 3.0x901(1G): 0x80 [ 222.417665] mv2112_update_link: 3.0x8109(100M): 0x0 [ 222.417690] mv2112_update_link: link 0x0 [ 222.417715] mv2112_read_status: autoneg is disabled [ 223.432663] mv2112_read_status [ 223.432954] mv2112_update_link: 3.0x901(1G): 0x80 [ 223.433217] mv2112_update_link: 3.0x8109(100M): 0x0 [ 223.433239] mv2112_update_link: link 0x0 [ 223.433261] mv2112_read_status: autoneg is disabled [ 224.043503] i2c_geni 980000.i2c: i2c error :-107 [ 224.049850] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 224.060663] i2c_geni 980000.i2c: i2c error :-107 [ 224.065715] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 224.456632] mv2112_read_status [ 224.456917] mv2112_update_link: 3.0x901(1G): 0x80 [ 224.457180] mv2112_update_link: 3.0x8109(100M): 0x0 [ 224.457208] mv2112_update_link: link 0x0 [ 224.457233] mv2112_read_status: autoneg is disabled [ 225.227967] init: starting service 'qvrd_vndr'... [ 225.238027] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 225.246365] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 225.303470] init: starting service 'sxrd'... [ 225.324407] init: Service 'qvrd_vndr' (pid 3939) exited with status 1 [ 225.324437] init: Sending signal 9 to service 'qvrd_vndr' (pid 3939) process group... [ 225.324640] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3939 in 0ms [ 225.374296] init: Service 'sxrd' (pid 3940) exited with status 1 [ 225.374330] init: Sending signal 9 to service 'sxrd' (pid 3940) process group... [ 225.374626] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3940 in 0ms [ 225.480703] mv2112_read_status [ 225.481051] mv2112_update_link: 3.0x901(1G): 0x80 [ 225.481361] mv2112_update_link: 3.0x8109(100M): 0x0 [ 225.481404] mv2112_update_link: link 0x0 [ 225.481448] mv2112_read_status: autoneg is disabled [ 226.092019] i2c_geni 980000.i2c: i2c error :-107 [ 226.099079] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 226.113540] i2c_geni 980000.i2c: i2c error :-107 [ 226.119880] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 226.504697] mv2112_read_status [ 226.504957] mv2112_update_link: 3.0x901(1G): 0x80 [ 226.505213] mv2112_update_link: 3.0x8109(100M): 0x0 [ 226.505235] mv2112_update_link: link 0x0 [ 226.505382] mv2112_read_status: autoneg is disabled [ 226.526692] perf: interrupt took too long (3168 > 3142), lowering kernel.perf_event_max_sample_rate to 63000 [ 227.529035] mv2112_read_status [ 227.529360] mv2112_update_link: 3.0x901(1G): 0x80 [ 227.529670] mv2112_update_link: 3.0x8109(100M): 0x0 [ 227.529715] mv2112_update_link: link 0x0 [ 227.529757] mv2112_read_status: autoneg is disabled [ 228.138874] i2c_geni 980000.i2c: i2c error :-107 [ 228.144607] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 228.156010] i2c_geni 980000.i2c: i2c error :-107 [ 228.161662] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 228.552642] mv2112_read_status [ 228.552961] mv2112_update_link: 3.0x901(1G): 0x80 [ 228.553288] mv2112_update_link: 3.0x8109(100M): 0x0 [ 228.553332] mv2112_update_link: link 0x0 [ 228.553374] mv2112_read_status: autoneg is disabled [ 229.576483] mv2112_read_status [ 229.576735] mv2112_update_link: 3.0x901(1G): 0x80 [ 229.576983] mv2112_update_link: 3.0x8109(100M): 0x0 [ 229.577002] mv2112_update_link: link 0x0 [ 229.577020] mv2112_read_status: autoneg is disabled [ 230.187555] i2c_geni 980000.i2c: i2c error :-107 [ 230.193228] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 230.204469] i2c_geni 980000.i2c: i2c error :-107 [ 230.209529] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 230.289495] init: starting service 'qvrd_vndr'... [ 230.297504] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 230.304061] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 230.358972] init: starting service 'sxrd'... [ 230.384095] init: Service 'qvrd_vndr' (pid 3942) exited with status 1 [ 230.384122] init: Sending signal 9 to service 'qvrd_vndr' (pid 3942) process group... [ 230.384374] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3942 in 0ms [ 230.433670] init: Service 'sxrd' (pid 3943) exited with status 1 [ 230.434809] init: Sending signal 9 to service 'sxrd' (pid 3943) process group... [ 230.436235] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3943 in 1ms [ 230.600978] mv2112_read_status [ 230.601339] mv2112_update_link: 3.0x901(1G): 0x80 [ 230.601648] mv2112_update_link: 3.0x8109(100M): 0x0 [ 230.601692] mv2112_update_link: link 0x0 [ 230.601735] mv2112_read_status: autoneg is disabled [ 231.624635] mv2112_read_status [ 231.624999] mv2112_update_link: 3.0x901(1G): 0x80 [ 231.625307] mv2112_update_link: 3.0x8109(100M): 0x0 [ 231.625350] mv2112_update_link: link 0x0 [ 231.625392] mv2112_read_status: autoneg is disabled [ 232.236019] i2c_geni 980000.i2c: i2c error :-107 [ 232.242944] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 232.254508] i2c_geni 980000.i2c: i2c error :-107 [ 232.259498] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 232.648782] mv2112_read_status [ 232.649048] mv2112_update_link: 3.0x901(1G): 0x80 [ 232.649301] mv2112_update_link: 3.0x8109(100M): 0x0 [ 232.649320] mv2112_update_link: link 0x0 [ 232.649339] mv2112_read_status: autoneg is disabled [ 233.672827] mv2112_read_status [ 233.673168] mv2112_update_link: 3.0x901(1G): 0x80 [ 233.673477] mv2112_update_link: 3.0x8109(100M): 0x0 [ 233.673520] mv2112_update_link: link 0x0 [ 233.673563] mv2112_read_status: autoneg is disabled [ 234.284653] i2c_geni 980000.i2c: i2c error :-107 [ 234.290309] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 234.305530] i2c_geni 980000.i2c: i2c error :-107 [ 234.310486] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 234.697261] mv2112_read_status [ 234.697823] mv2112_update_link: 3.0x901(1G): 0x80 [ 234.698289] mv2112_update_link: 3.0x8109(100M): 0x0 [ 234.698332] mv2112_update_link: link 0x0 [ 234.698374] mv2112_read_status: autoneg is disabled [ 235.345839] init: starting service 'qvrd_vndr'... [ 235.353727] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 235.361644] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 235.418597] init: starting service 'sxrd'... [ 235.441921] init: Service 'qvrd_vndr' (pid 3945) exited with status 1 [ 235.441951] init: Sending signal 9 to service 'qvrd_vndr' (pid 3945) process group... [ 235.442158] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3945 in 0ms [ 235.497732] init: Service 'sxrd' (pid 3946) exited with status 1 [ 235.497777] init: Sending signal 9 to service 'sxrd' (pid 3946) process group... [ 235.498102] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3946 in 0ms [ 235.720933] mv2112_read_status [ 235.721309] mv2112_update_link: 3.0x901(1G): 0x80 [ 235.721617] mv2112_update_link: 3.0x8109(100M): 0x0 [ 235.721661] mv2112_update_link: link 0x0 [ 235.721704] mv2112_read_status: autoneg is disabled [ 236.331767] i2c_geni 980000.i2c: i2c error :-107 [ 236.341200] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 236.351755] i2c_geni 980000.i2c: i2c error :-107 [ 236.356968] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 236.744664] mv2112_read_status [ 236.745021] mv2112_update_link: 3.0x901(1G): 0x80 [ 236.745339] mv2112_update_link: 3.0x8109(100M): 0x0 [ 236.745383] mv2112_update_link: link 0x0 [ 236.745426] mv2112_read_status: autoneg is disabled [ 237.769156] mv2112_read_status [ 237.769492] mv2112_update_link: 3.0x901(1G): 0x80 [ 237.769813] mv2112_update_link: 3.0x8109(100M): 0x0 [ 237.769857] mv2112_update_link: link 0x0 [ 237.769899] mv2112_read_status: autoneg is disabled [ 238.380206] i2c_geni 980000.i2c: i2c error :-107 [ 238.385562] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 238.401032] i2c_geni 980000.i2c: i2c error :-107 [ 238.406255] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 238.792777] mv2112_read_status [ 238.793107] mv2112_update_link: 3.0x901(1G): 0x80 [ 238.793416] mv2112_update_link: 3.0x8109(100M): 0x0 [ 238.793459] mv2112_update_link: link 0x0 [ 238.793501] mv2112_read_status: autoneg is disabled [ 239.816608] mv2112_read_status [ 239.816902] mv2112_update_link: 3.0x901(1G): 0x80 [ 239.817161] mv2112_update_link: 3.0x8109(100M): 0x0 [ 239.817187] mv2112_update_link: link 0x0 [ 239.817212] mv2112_read_status: autoneg is disabled [ 240.404618] init: starting service 'qvrd_vndr'... [ 240.411893] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 240.418330] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 240.427061] i2c_geni 980000.i2c: i2c error :-107 [ 240.433524] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 240.444099] i2c_geni 980000.i2c: i2c error :-107 [ 240.449786] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 240.476512] init: starting service 'sxrd'... [ 240.515044] init: Service 'qvrd_vndr' (pid 3948) exited with status 1 [ 240.515074] init: Sending signal 9 to service 'qvrd_vndr' (pid 3948) process group... [ 240.515268] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3948 in 0ms [ 240.543626] init: Service 'sxrd' (pid 3949) exited with status 1 [ 240.543709] init: Sending signal 9 to service 'sxrd' (pid 3949) process group... [ 240.544657] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3949 in 0ms [ 240.840914] mv2112_read_status [ 240.841291] mv2112_update_link: 3.0x901(1G): 0x80 [ 240.841609] mv2112_update_link: 3.0x8109(100M): 0x0 [ 240.841653] mv2112_update_link: link 0x0 [ 240.841695] mv2112_read_status: autoneg is disabled [ 241.864629] mv2112_read_status [ 241.865429] mv2112_update_link: 3.0x901(1G): 0x80 [ 241.865741] mv2112_update_link: 3.0x8109(100M): 0x0 [ 241.865786] mv2112_update_link: link 0x0 [ 241.865828] mv2112_read_status: autoneg is disabled [ 242.476583] i2c_geni 980000.i2c: i2c error :-107 [ 242.481862] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 242.493854] i2c_geni 980000.i2c: i2c error :-107 [ 242.499950] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 242.888986] mv2112_read_status [ 242.889312] mv2112_update_link: 3.0x901(1G): 0x80 [ 242.890023] mv2112_update_link: 3.0x8109(100M): 0x0 [ 242.890068] mv2112_update_link: link 0x0 [ 242.890110] mv2112_read_status: autoneg is disabled [ 243.913159] mv2112_read_status [ 243.913765] mv2112_update_link: 3.0x901(1G): 0x80 [ 243.914077] mv2112_update_link: 3.0x8109(100M): 0x0 [ 243.914120] mv2112_update_link: link 0x0 [ 243.914163] mv2112_read_status: autoneg is disabled [ 244.524515] i2c_geni 980000.i2c: i2c error :-107 [ 244.530116] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 244.541969] i2c_geni 980000.i2c: i2c error :-107 [ 244.547093] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 244.936668] mv2112_read_status [ 244.936913] mv2112_update_link: 3.0x901(1G): 0x80 [ 244.937147] mv2112_update_link: 3.0x8109(100M): 0x0 [ 244.937163] mv2112_update_link: link 0x0 [ 244.937180] mv2112_read_status: autoneg is disabled [ 245.460160] init: starting service 'qvrd_vndr'... [ 245.463483] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 245.466137] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 245.501982] init: starting service 'sxrd'... [ 245.550320] init: Service 'qvrd_vndr' (pid 3951) exited with status 1 [ 245.550420] init: Sending signal 9 to service 'qvrd_vndr' (pid 3951) process group... [ 245.551132] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3951 in 0ms [ 245.555952] init: Service 'sxrd' (pid 3952) exited with status 1 [ 245.556026] init: Sending signal 9 to service 'sxrd' (pid 3952) process group... [ 245.556775] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3952 in 0ms [ 245.960495] mv2112_read_status [ 245.960759] mv2112_update_link: 3.0x901(1G): 0x80 [ 245.960999] mv2112_update_link: 3.0x8109(100M): 0x0 [ 245.961016] mv2112_update_link: link 0x0 [ 245.961033] mv2112_read_status: autoneg is disabled [ 246.569971] i2c_geni 980000.i2c: i2c error :-107 [ 246.575820] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 246.587317] i2c_geni 980000.i2c: i2c error :-107 [ 246.593206] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 246.984481] mv2112_read_status [ 246.984738] mv2112_update_link: 3.0x901(1G): 0x80 [ 246.984974] mv2112_update_link: 3.0x8109(100M): 0x0 [ 246.984992] mv2112_update_link: link 0x0 [ 246.985010] mv2112_read_status: autoneg is disabled [ 248.009086] mv2112_read_status [ 248.009444] mv2112_update_link: 3.0x901(1G): 0x80 [ 248.009754] mv2112_update_link: 3.0x8109(100M): 0x0 [ 248.009800] mv2112_update_link: link 0x0 [ 248.009843] mv2112_read_status: autoneg is disabled [ 248.619965] i2c_geni 980000.i2c: i2c error :-107 [ 248.625422] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 248.636442] i2c_geni 980000.i2c: i2c error :-107 [ 248.641586] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 249.033179] mv2112_read_status [ 249.033550] mv2112_update_link: 3.0x901(1G): 0x80 [ 249.033859] mv2112_update_link: 3.0x8109(100M): 0x0 [ 249.033902] mv2112_update_link: link 0x0 [ 249.033946] mv2112_read_status: autoneg is disabled [ 250.056488] mv2112_read_status [ 250.056757] mv2112_update_link: 3.0x901(1G): 0x80 [ 250.056998] mv2112_update_link: 3.0x8109(100M): 0x0 [ 250.057016] mv2112_update_link: link 0x0 [ 250.057034] mv2112_read_status: autoneg is disabled [ 250.497999] init: starting service 'qvrd_vndr'... [ 250.505571] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 250.512258] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 250.573390] init: starting service 'sxrd'... [ 250.601419] init: Service 'qvrd_vndr' (pid 3954) exited with status 1 [ 250.601449] init: Sending signal 9 to service 'qvrd_vndr' (pid 3954) process group... [ 250.601654] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3954 in 0ms [ 250.636618] init: Service 'sxrd' (pid 3955) exited with status 1 [ 250.636646] init: Sending signal 9 to service 'sxrd' (pid 3955) process group... [ 250.636860] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3955 in 0ms [ 250.667368] i2c_geni 980000.i2c: i2c error :-107 [ 250.672567] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 250.683996] i2c_geni 980000.i2c: i2c error :-107 [ 250.688934] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 251.080851] mv2112_read_status [ 251.081198] mv2112_update_link: 3.0x901(1G): 0x80 [ 251.081864] mv2112_update_link: 3.0x8109(100M): 0x0 [ 251.081911] mv2112_update_link: link 0x0 [ 251.081954] mv2112_read_status: autoneg is disabled [ 252.104648] mv2112_read_status [ 252.105496] mv2112_update_link: 3.0x901(1G): 0x80 [ 252.105808] mv2112_update_link: 3.0x8109(100M): 0x0 [ 252.105852] mv2112_update_link: link 0x0 [ 252.105895] mv2112_read_status: autoneg is disabled [ 252.718062] i2c_geni 980000.i2c: i2c error :-107 [ 252.725845] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 252.739470] i2c_geni 980000.i2c: i2c error :-107 [ 252.745725] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 253.128874] mv2112_read_status [ 253.129137] mv2112_update_link: 3.0x901(1G): 0x80 [ 253.129388] mv2112_update_link: 3.0x8109(100M): 0x0 [ 253.129410] mv2112_update_link: link 0x0 [ 253.129433] mv2112_read_status: autoneg is disabled [ 254.152783] mv2112_read_status [ 254.153100] mv2112_update_link: 3.0x901(1G): 0x80 [ 254.153408] mv2112_update_link: 3.0x8109(100M): 0x0 [ 254.153451] mv2112_update_link: link 0x0 [ 254.153493] mv2112_read_status: autoneg is disabled [ 254.761737] i2c_geni 980000.i2c: i2c error :-107 [ 254.766816] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 254.777510] i2c_geni 980000.i2c: i2c error :-107 [ 254.782644] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 255.176780] mv2112_read_status [ 255.177473] mv2112_update_link: 3.0x901(1G): 0x80 [ 255.177785] mv2112_update_link: 3.0x8109(100M): 0x0 [ 255.177829] mv2112_update_link: link 0x0 [ 255.177871] mv2112_read_status: autoneg is disabled [ 255.559935] init: starting service 'qvrd_vndr'... [ 255.568078] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 255.575667] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 255.635887] init: starting service 'sxrd'... [ 255.663097] init: Service 'qvrd_vndr' (pid 3957) exited with status 1 [ 255.663125] init: Sending signal 9 to service 'qvrd_vndr' (pid 3957) process group... [ 255.663322] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3957 in 0ms [ 255.697691] init: Service 'sxrd' (pid 3958) exited with status 1 [ 255.697723] init: Sending signal 9 to service 'sxrd' (pid 3958) process group... [ 255.697952] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3958 in 0ms [ 256.200830] mv2112_read_status [ 256.201368] mv2112_update_link: 3.0x901(1G): 0x80 [ 256.201834] mv2112_update_link: 3.0x8109(100M): 0x0 [ 256.201879] mv2112_update_link: link 0x0 [ 256.201922] mv2112_read_status: autoneg is disabled [ 256.818199] i2c_geni 980000.i2c: i2c error :-107 [ 256.825449] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 256.836632] i2c_geni 980000.i2c: i2c error :-107 [ 256.841542] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 257.224865] mv2112_read_status [ 257.225194] mv2112_update_link: 3.0x901(1G): 0x80 [ 257.225504] mv2112_update_link: 3.0x8109(100M): 0x0 [ 257.225771] mv2112_update_link: link 0x0 [ 257.225815] mv2112_read_status: autoneg is disabled [ 258.249301] mv2112_read_status [ 258.249651] mv2112_update_link: 3.0x901(1G): 0x80 [ 258.250464] mv2112_update_link: 3.0x8109(100M): 0x0 [ 258.250509] mv2112_update_link: link 0x0 [ 258.250553] mv2112_read_status: autoneg is disabled [ 258.859859] i2c_geni 980000.i2c: i2c error :-107 [ 258.865249] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 258.877662] i2c_geni 980000.i2c: i2c error :-107 [ 258.882702] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 259.272680] mv2112_read_status [ 259.273007] mv2112_update_link: 3.0x901(1G): 0x80 [ 259.273316] mv2112_update_link: 3.0x8109(100M): 0x0 [ 259.273358] mv2112_update_link: link 0x0 [ 259.273400] mv2112_read_status: autoneg is disabled [ 260.296621] mv2112_read_status [ 260.296970] mv2112_update_link: 3.0x901(1G): 0x80 [ 260.297277] mv2112_update_link: 3.0x8109(100M): 0x0 [ 260.297321] mv2112_update_link: link 0x0 [ 260.297364] mv2112_read_status: autoneg is disabled [ 260.621666] init: starting service 'qvrd_vndr'... [ 260.629355] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 260.635977] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 260.697444] init: starting service 'sxrd'... [ 260.722611] init: Service 'qvrd_vndr' (pid 3960) exited with status 1 [ 260.722640] init: Sending signal 9 to service 'qvrd_vndr' (pid 3960) process group... [ 260.722851] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3960 in 0ms [ 260.773787] init: Service 'sxrd' (pid 3961) exited with status 1 [ 260.773811] init: Sending signal 9 to service 'sxrd' (pid 3961) process group... [ 260.774011] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3961 in 0ms [ 260.909105] i2c_geni 980000.i2c: i2c error :-107 [ 260.914222] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 260.926080] i2c_geni 980000.i2c: i2c error :-107 [ 260.931007] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 261.320694] mv2112_read_status [ 261.321053] mv2112_update_link: 3.0x901(1G): 0x80 [ 261.321392] mv2112_update_link: 3.0x8109(100M): 0x0 [ 261.321435] mv2112_update_link: link 0x0 [ 261.321479] mv2112_read_status: autoneg is disabled [ 262.344821] mv2112_read_status [ 262.345189] mv2112_update_link: 3.0x901(1G): 0x80 [ 262.345993] mv2112_update_link: 3.0x8109(100M): 0x0 [ 262.346037] mv2112_update_link: link 0x0 [ 262.346079] mv2112_read_status: autoneg is disabled [ 262.955206] i2c_geni 980000.i2c: i2c error :-107 [ 262.962526] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 262.973456] i2c_geni 980000.i2c: i2c error :-107 [ 262.979138] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 263.369018] mv2112_read_status [ 263.369833] mv2112_update_link: 3.0x901(1G): 0x80 [ 263.370143] mv2112_update_link: 3.0x8109(100M): 0x0 [ 263.370187] mv2112_update_link: link 0x0 [ 263.370229] mv2112_read_status: autoneg is disabled [ 264.392716] mv2112_read_status [ 264.393012] mv2112_update_link: 3.0x901(1G): 0x80 [ 264.393278] mv2112_update_link: 3.0x8109(100M): 0x0 [ 264.393313] mv2112_update_link: link 0x0 [ 264.393347] mv2112_read_status: autoneg is disabled [ 265.003464] i2c_geni 980000.i2c: i2c error :-107 [ 265.008775] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 265.020966] i2c_geni 980000.i2c: i2c error :-107 [ 265.026080] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 265.416797] mv2112_read_status [ 265.417130] mv2112_update_link: 3.0x901(1G): 0x80 [ 265.417437] mv2112_update_link: 3.0x8109(100M): 0x0 [ 265.417480] mv2112_update_link: link 0x0 [ 265.417522] mv2112_read_status: autoneg is disabled [ 265.683330] init: starting service 'qvrd_vndr'... [ 265.690756] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 265.697820] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 265.757202] init: starting service 'sxrd'... [ 265.783037] init: Service 'qvrd_vndr' (pid 3963) exited with status 1 [ 265.783074] init: Sending signal 9 to service 'qvrd_vndr' (pid 3963) process group... [ 265.783302] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3963 in 0ms [ 265.833324] init: Service 'sxrd' (pid 3964) exited with status 1 [ 265.833350] init: Sending signal 9 to service 'sxrd' (pid 3964) process group... [ 265.833598] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3964 in 0ms [ 266.440946] mv2112_read_status [ 266.441306] mv2112_update_link: 3.0x901(1G): 0x80 [ 266.441616] mv2112_update_link: 3.0x8109(100M): 0x0 [ 266.441659] mv2112_update_link: link 0x0 [ 266.441703] mv2112_read_status: autoneg is disabled [ 267.051693] i2c_geni 980000.i2c: i2c error :-107 [ 267.056997] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 267.069193] i2c_geni 980000.i2c: i2c error :-107 [ 267.074173] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 267.464853] mv2112_read_status [ 267.465205] mv2112_update_link: 3.0x901(1G): 0x80 [ 267.465574] mv2112_update_link: 3.0x8109(100M): 0x0 [ 267.465618] mv2112_update_link: link 0x0 [ 267.465662] mv2112_read_status: autoneg is disabled [ 268.489129] mv2112_read_status [ 268.489448] mv2112_update_link: 3.0x901(1G): 0x80 [ 268.490019] mv2112_update_link: 3.0x8109(100M): 0x0 [ 268.490064] mv2112_update_link: link 0x0 [ 268.490113] mv2112_read_status: autoneg is disabled [ 269.100750] i2c_geni 980000.i2c: i2c error :-107 [ 269.105879] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 269.117337] i2c_geni 980000.i2c: i2c error :-107 [ 269.122376] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 269.512691] mv2112_read_status [ 269.513029] mv2112_update_link: 3.0x901(1G): 0x80 [ 269.513338] mv2112_update_link: 3.0x8109(100M): 0x0 [ 269.513381] mv2112_update_link: link 0x0 [ 269.513424] mv2112_read_status: autoneg is disabled [ 270.536675] mv2112_read_status [ 270.537031] mv2112_update_link: 3.0x901(1G): 0x80 [ 270.537351] mv2112_update_link: 3.0x8109(100M): 0x0 [ 270.537395] mv2112_update_link: link 0x0 [ 270.537437] mv2112_read_status: autoneg is disabled [ 270.743881] init: starting service 'qvrd_vndr'... [ 270.752082] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 270.758876] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 270.816178] init: starting service 'sxrd'... [ 270.855310] init: Service 'qvrd_vndr' (pid 3966) exited with status 1 [ 270.855342] init: Sending signal 9 to service 'qvrd_vndr' (pid 3966) process group... [ 270.855557] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3966 in 0ms [ 270.879575] init: Service 'sxrd' (pid 3967) exited with status 1 [ 270.879706] init: Sending signal 9 to service 'sxrd' (pid 3967) process group... [ 270.881089] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3967 in 1ms [ 271.148721] i2c_geni 980000.i2c: i2c error :-107 [ 271.155598] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 271.168569] i2c_geni 980000.i2c: i2c error :-107 [ 271.173517] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 271.561207] mv2112_read_status [ 271.561551] mv2112_update_link: 3.0x901(1G): 0x80 [ 271.561860] mv2112_update_link: 3.0x8109(100M): 0x0 [ 271.561904] mv2112_update_link: link 0x0 [ 271.561947] mv2112_read_status: autoneg is disabled [ 272.584852] mv2112_read_status [ 272.585212] mv2112_update_link: 3.0x901(1G): 0x80 [ 272.585523] mv2112_update_link: 3.0x8109(100M): 0x0 [ 272.585567] mv2112_update_link: link 0x0 [ 272.585610] mv2112_read_status: autoneg is disabled [ 273.195720] i2c_geni 980000.i2c: i2c error :-107 [ 273.201283] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 273.216703] i2c_geni 980000.i2c: i2c error :-107 [ 273.222507] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 273.609202] mv2112_read_status [ 273.609559] mv2112_update_link: 3.0x901(1G): 0x80 [ 273.609896] mv2112_update_link: 3.0x8109(100M): 0x0 [ 273.609940] mv2112_update_link: link 0x0 [ 273.609982] mv2112_read_status: autoneg is disabled [ 274.632659] mv2112_read_status [ 274.632996] mv2112_update_link: 3.0x901(1G): 0x80 [ 274.633315] mv2112_update_link: 3.0x8109(100M): 0x0 [ 274.633358] mv2112_update_link: link 0x0 [ 274.633400] mv2112_read_status: autoneg is disabled [ 275.243438] i2c_geni 980000.i2c: i2c error :-107 [ 275.249180] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 275.261186] i2c_geni 980000.i2c: i2c error :-107 [ 275.267118] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 275.657193] mv2112_read_status [ 275.657856] mv2112_update_link: 3.0x901(1G): 0x80 [ 275.658270] mv2112_update_link: 3.0x8109(100M): 0x0 [ 275.658314] mv2112_update_link: link 0x0 [ 275.658358] mv2112_read_status: autoneg is disabled [ 275.802448] init: starting service 'qvrd_vndr'... [ 275.810420] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 275.818325] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 275.877763] init: starting service 'sxrd'... [ 275.902253] init: Service 'qvrd_vndr' (pid 3971) exited with status 1 [ 275.902285] init: Sending signal 9 to service 'qvrd_vndr' (pid 3971) process group... [ 275.902478] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3971 in 0ms [ 275.952473] init: Service 'sxrd' (pid 3972) exited with status 1 [ 275.952498] init: Sending signal 9 to service 'sxrd' (pid 3972) process group... [ 275.952685] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3972 in 0ms [ 276.680646] mv2112_read_status [ 276.681005] mv2112_update_link: 3.0x901(1G): 0x80 [ 276.681316] mv2112_update_link: 3.0x8109(100M): 0x0 [ 276.681361] mv2112_update_link: link 0x0 [ 276.681404] mv2112_read_status: autoneg is disabled [ 277.292568] i2c_geni 980000.i2c: i2c error :-107 [ 277.297844] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 277.309664] i2c_geni 980000.i2c: i2c error :-107 [ 277.314593] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 277.704815] mv2112_read_status [ 277.705142] mv2112_update_link: 3.0x901(1G): 0x80 [ 277.705798] mv2112_update_link: 3.0x8109(100M): 0x0 [ 277.705841] mv2112_update_link: link 0x0 [ 277.705899] mv2112_read_status: autoneg is disabled [ 278.728984] mv2112_read_status [ 278.729306] mv2112_update_link: 3.0x901(1G): 0x80 [ 278.729614] mv2112_update_link: 3.0x8109(100M): 0x0 [ 278.729657] mv2112_update_link: link 0x0 [ 278.729699] mv2112_read_status: autoneg is disabled [ 279.338346] i2c_geni 980000.i2c: i2c error :-107 [ 279.343359] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 279.354055] i2c_geni 980000.i2c: i2c error :-107 [ 279.359864] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 279.752567] mv2112_read_status [ 279.752851] mv2112_update_link: 3.0x901(1G): 0x80 [ 279.753445] mv2112_update_link: 3.0x8109(100M): 0x0 [ 279.753467] mv2112_update_link: link 0x0 [ 279.753489] mv2112_read_status: autoneg is disabled [ 280.780624] mv2112_read_status [ 280.780923] mv2112_update_link: 3.0x901(1G): 0x80 [ 280.781186] mv2112_update_link: 3.0x8109(100M): 0x0 [ 280.781212] mv2112_update_link: link 0x0 [ 280.781236] mv2112_read_status: autoneg is disabled [ 280.862397] init: starting service 'qvrd_vndr'... [ 280.866650] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 280.870162] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 280.917008] init: starting service 'sxrd'... [ 280.966261] init: Service 'qvrd_vndr' (pid 3974) exited with status 1 [ 280.966364] init: Sending signal 9 to service 'qvrd_vndr' (pid 3974) process group... [ 280.967104] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3974 in 0ms [ 280.973224] init: Service 'sxrd' (pid 3975) exited with status 1 [ 280.973530] init: Sending signal 9 to service 'sxrd' (pid 3975) process group... [ 280.977171] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3975 in 3ms [ 281.386260] i2c_geni 980000.i2c: i2c error :-107 [ 281.391234] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 281.402226] i2c_geni 980000.i2c: i2c error :-107 [ 281.407999] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 281.801434] mv2112_read_status [ 281.801723] mv2112_update_link: 3.0x901(1G): 0x80 [ 281.801985] mv2112_update_link: 3.0x8109(100M): 0x0 [ 281.802012] mv2112_update_link: link 0x0 [ 281.802037] mv2112_read_status: autoneg is disabled [ 282.824680] mv2112_read_status [ 282.824947] mv2112_update_link: 3.0x901(1G): 0x80 [ 282.825193] mv2112_update_link: 3.0x8109(100M): 0x0 [ 282.825217] mv2112_update_link: link 0x0 [ 282.825239] mv2112_read_status: autoneg is disabled [ 283.434553] i2c_geni 980000.i2c: i2c error :-107 [ 283.448961] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 283.459212] i2c_geni 980000.i2c: i2c error :-107 [ 283.464089] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 283.848905] mv2112_read_status [ 283.849202] mv2112_update_link: 3.0x901(1G): 0x80 [ 283.849470] mv2112_update_link: 3.0x8109(100M): 0x0 [ 283.849498] mv2112_update_link: link 0x0 [ 283.849525] mv2112_read_status: autoneg is disabled [ 284.872510] mv2112_read_status [ 284.872811] mv2112_update_link: 3.0x901(1G): 0x80 [ 284.873516] mv2112_update_link: 3.0x8109(100M): 0x0 [ 284.873570] mv2112_update_link: link 0x0 [ 284.873620] mv2112_read_status: autoneg is disabled [ 285.482696] i2c_geni 980000.i2c: i2c error :-107 [ 285.488725] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 285.499055] i2c_geni 980000.i2c: i2c error :-107 [ 285.504033] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 285.896683] mv2112_read_status [ 285.897068] mv2112_update_link: 3.0x901(1G): 0x80 [ 285.897379] mv2112_update_link: 3.0x8109(100M): 0x0 [ 285.897422] mv2112_update_link: link 0x0 [ 285.897466] mv2112_read_status: autoneg is disabled [ 285.903999] init: starting service 'qvrd_vndr'... [ 285.911060] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 285.918418] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 285.978225] init: starting service 'sxrd'... [ 286.002059] init: Service 'qvrd_vndr' (pid 3977) exited with status 1 [ 286.002095] init: Sending signal 9 to service 'qvrd_vndr' (pid 3977) process group... [ 286.002319] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3977 in 0ms [ 286.054253] init: Service 'sxrd' (pid 3978) exited with status 1 [ 286.054279] init: Sending signal 9 to service 'sxrd' (pid 3978) process group... [ 286.054486] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3978 in 0ms [ 286.920663] mv2112_read_status [ 286.921018] mv2112_update_link: 3.0x901(1G): 0x80 [ 286.921330] mv2112_update_link: 3.0x8109(100M): 0x0 [ 286.921373] mv2112_update_link: link 0x0 [ 286.921416] mv2112_read_status: autoneg is disabled [ 287.443985] perf: interrupt took too long (3966 > 3960), lowering kernel.perf_event_max_sample_rate to 50250 [ 287.532147] i2c_geni 980000.i2c: i2c error :-107 [ 287.537477] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 287.549744] i2c_geni 980000.i2c: i2c error :-107 [ 287.554639] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 287.944777] mv2112_read_status [ 287.945097] mv2112_update_link: 3.0x901(1G): 0x80 [ 287.945405] mv2112_update_link: 3.0x8109(100M): 0x0 [ 287.945448] mv2112_update_link: link 0x0 [ 287.945491] mv2112_read_status: autoneg is disabled [ 288.969018] mv2112_read_status [ 288.969816] mv2112_update_link: 3.0x901(1G): 0x80 [ 288.970127] mv2112_update_link: 3.0x8109(100M): 0x0 [ 288.970171] mv2112_update_link: link 0x0 [ 288.970214] mv2112_read_status: autoneg is disabled [ 289.582112] i2c_geni 980000.i2c: i2c error :-107 [ 289.587242] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 289.598300] i2c_geni 980000.i2c: i2c error :-107 [ 289.603311] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 289.992633] mv2112_read_status [ 289.992961] mv2112_update_link: 3.0x901(1G): 0x80 [ 289.993270] mv2112_update_link: 3.0x8109(100M): 0x0 [ 289.993312] mv2112_update_link: link 0x0 [ 289.993354] mv2112_read_status: autoneg is disabled [ 290.964649] init: starting service 'qvrd_vndr'... [ 290.972142] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 290.979015] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 291.016447] mv2112_read_status [ 291.016721] mv2112_update_link: 3.0x901(1G): 0x80 [ 291.016972] mv2112_update_link: 3.0x8109(100M): 0x0 [ 291.016992] mv2112_update_link: link 0x0 [ 291.017012] mv2112_read_status: autoneg is disabled [ 291.037920] init: starting service 'sxrd'... [ 291.061623] init: Service 'qvrd_vndr' (pid 3980) exited with status 1 [ 291.061660] init: Sending signal 9 to service 'qvrd_vndr' (pid 3980) process group... [ 291.061914] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3980 in 0ms [ 291.117347] init: Service 'sxrd' (pid 3981) exited with status 1 [ 291.117387] init: Sending signal 9 to service 'sxrd' (pid 3981) process group... [ 291.117753] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3981 in 0ms [ 291.628123] i2c_geni 980000.i2c: i2c error :-107 [ 291.633286] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 291.644982] i2c_geni 980000.i2c: i2c error :-107 [ 291.649925] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 292.040881] mv2112_read_status [ 292.041231] mv2112_update_link: 3.0x901(1G): 0x80 [ 292.041542] mv2112_update_link: 3.0x8109(100M): 0x0 [ 292.041585] mv2112_update_link: link 0x0 [ 292.041628] mv2112_read_status: autoneg is disabled [ 293.064547] mv2112_read_status [ 293.064822] mv2112_update_link: 3.0x901(1G): 0x80 [ 293.065086] mv2112_update_link: 3.0x8109(100M): 0x0 [ 293.065120] mv2112_update_link: link 0x0 [ 293.065154] mv2112_read_status: autoneg is disabled [ 293.677578] i2c_geni 980000.i2c: i2c error :-107 [ 293.683555] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 293.697089] i2c_geni 980000.i2c: i2c error :-107 [ 293.702408] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 294.089012] mv2112_read_status [ 294.089331] mv2112_update_link: 3.0x901(1G): 0x80 [ 294.089639] mv2112_update_link: 3.0x8109(100M): 0x0 [ 294.089682] mv2112_update_link: link 0x0 [ 294.089724] mv2112_read_status: autoneg is disabled [ 295.113225] mv2112_read_status [ 295.113587] mv2112_update_link: 3.0x901(1G): 0x80 [ 295.113918] mv2112_update_link: 3.0x8109(100M): 0x0 [ 295.113962] mv2112_update_link: link 0x0 [ 295.114005] mv2112_read_status: autoneg is disabled [ 295.723881] i2c_geni 980000.i2c: i2c error :-107 [ 295.729454] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 295.741856] i2c_geni 980000.i2c: i2c error :-107 [ 295.747054] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 296.025248] init: starting service 'qvrd_vndr'... [ 296.033764] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 296.041039] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 296.099683] init: starting service 'sxrd'... [ 296.123827] init: Service 'qvrd_vndr' (pid 3983) exited with status 1 [ 296.123864] init: Sending signal 9 to service 'qvrd_vndr' (pid 3983) process group... [ 296.124099] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3983 in 0ms [ 296.136520] mv2112_read_status [ 296.136793] mv2112_update_link: 3.0x901(1G): 0x80 [ 296.137045] mv2112_update_link: 3.0x8109(100M): 0x0 [ 296.137069] mv2112_update_link: link 0x0 [ 296.137093] mv2112_read_status: autoneg is disabled [ 296.175105] init: Service 'sxrd' (pid 3984) exited with status 1 [ 296.175288] init: Sending signal 9 to service 'sxrd' (pid 3984) process group... [ 296.177086] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3984 in 1ms [ 297.160824] mv2112_read_status [ 297.161183] mv2112_update_link: 3.0x901(1G): 0x80 [ 297.161493] mv2112_update_link: 3.0x8109(100M): 0x0 [ 297.161537] mv2112_update_link: link 0x0 [ 297.161581] mv2112_read_status: autoneg is disabled [ 297.771500] i2c_geni 980000.i2c: i2c error :-107 [ 297.777044] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 297.788876] i2c_geni 980000.i2c: i2c error :-107 [ 297.793744] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 298.184580] mv2112_read_status [ 298.185175] mv2112_update_link: 3.0x901(1G): 0x80 [ 298.185436] mv2112_update_link: 3.0x8109(100M): 0x0 [ 298.185461] mv2112_update_link: link 0x0 [ 298.185487] mv2112_read_status: autoneg is disabled [ 299.209185] mv2112_read_status [ 299.209520] mv2112_update_link: 3.0x901(1G): 0x80 [ 299.209828] mv2112_update_link: 3.0x8109(100M): 0x0 [ 299.209871] mv2112_update_link: link 0x0 [ 299.209914] mv2112_read_status: autoneg is disabled [ 299.820479] i2c_geni 980000.i2c: i2c error :-107 [ 299.825858] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 299.838232] i2c_geni 980000.i2c: i2c error :-107 [ 299.843469] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 300.232461] mv2112_read_status [ 300.232719] mv2112_update_link: 3.0x901(1G): 0x80 [ 300.232970] mv2112_update_link: 3.0x8109(100M): 0x0 [ 300.232994] mv2112_update_link: link 0x0 [ 300.233017] mv2112_read_status: autoneg is disabled [ 301.085241] init: starting service 'qvrd_vndr'... [ 301.093051] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 301.099504] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 301.159009] init: starting service 'sxrd'... [ 301.182338] init: Service 'qvrd_vndr' (pid 3986) exited with status 1 [ 301.182366] init: Sending signal 9 to service 'qvrd_vndr' (pid 3986) process group... [ 301.182567] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3986 in 0ms [ 301.232547] init: Service 'sxrd' (pid 3987) exited with status 1 [ 301.232572] init: Sending signal 9 to service 'sxrd' (pid 3987) process group... [ 301.232760] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3987 in 0ms [ 301.256707] mv2112_read_status [ 301.257053] mv2112_update_link: 3.0x901(1G): 0x80 [ 301.257355] mv2112_update_link: 3.0x8109(100M): 0x0 [ 301.257398] mv2112_update_link: link 0x0 [ 301.257441] mv2112_read_status: autoneg is disabled [ 301.869222] i2c_geni 980000.i2c: i2c error :-107 [ 301.874542] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 301.885930] i2c_geni 980000.i2c: i2c error :-107 [ 301.890854] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 302.280612] mv2112_read_status [ 302.280930] mv2112_update_link: 3.0x901(1G): 0x80 [ 302.281238] mv2112_update_link: 3.0x8109(100M): 0x0 [ 302.281282] mv2112_update_link: link 0x0 [ 302.281324] mv2112_read_status: autoneg is disabled [ 303.305176] mv2112_read_status [ 303.305494] mv2112_update_link: 3.0x901(1G): 0x80 [ 303.305803] mv2112_update_link: 3.0x8109(100M): 0x0 [ 303.305846] mv2112_update_link: link 0x0 [ 303.305888] mv2112_read_status: autoneg is disabled [ 303.916124] i2c_geni 980000.i2c: i2c error :-107 [ 303.921314] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 303.937729] i2c_geni 980000.i2c: i2c error :-107 [ 303.942721] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 304.329166] mv2112_read_status [ 304.329500] mv2112_update_link: 3.0x901(1G): 0x80 [ 304.329819] mv2112_update_link: 3.0x8109(100M): 0x0 [ 304.329863] mv2112_update_link: link 0x0 [ 304.329905] mv2112_read_status: autoneg is disabled [ 305.353182] mv2112_read_status [ 305.353501] mv2112_update_link: 3.0x901(1G): 0x80 [ 305.353810] mv2112_update_link: 3.0x8109(100M): 0x0 [ 305.353853] mv2112_update_link: link 0x0 [ 305.353895] mv2112_read_status: autoneg is disabled [ 305.966034] i2c_geni 980000.i2c: i2c error :-107 [ 305.971242] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 305.986714] i2c_geni 980000.i2c: i2c error :-107 [ 305.991905] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 306.145894] init: starting service 'qvrd_vndr'... [ 306.153687] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 306.160228] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 306.217079] init: starting service 'sxrd'... [ 306.241578] init: Service 'qvrd_vndr' (pid 3989) exited with status 1 [ 306.241608] init: Sending signal 9 to service 'qvrd_vndr' (pid 3989) process group... [ 306.241800] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3989 in 0ms [ 306.275251] init: Service 'sxrd' (pid 3990) exited with status 1 [ 306.275275] init: Sending signal 9 to service 'sxrd' (pid 3990) process group... [ 306.275473] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3990 in 0ms [ 306.376892] mv2112_read_status [ 306.377733] mv2112_update_link: 3.0x901(1G): 0x80 [ 306.378137] mv2112_update_link: 3.0x8109(100M): 0x0 [ 306.378182] mv2112_update_link: link 0x0 [ 306.378225] mv2112_read_status: autoneg is disabled [ 307.400667] mv2112_read_status [ 307.401012] mv2112_update_link: 3.0x901(1G): 0x80 [ 307.401321] mv2112_update_link: 3.0x8109(100M): 0x0 [ 307.401365] mv2112_update_link: link 0x0 [ 307.401408] mv2112_read_status: autoneg is disabled [ 308.011607] i2c_geni 980000.i2c: i2c error :-107 [ 308.017696] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 308.029234] i2c_geni 980000.i2c: i2c error :-107 [ 308.034163] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 308.424628] mv2112_read_status [ 308.424957] mv2112_update_link: 3.0x901(1G): 0x80 [ 308.425266] mv2112_update_link: 3.0x8109(100M): 0x0 [ 308.425310] mv2112_update_link: link 0x0 [ 308.425352] mv2112_read_status: autoneg is disabled [ 309.449183] mv2112_read_status [ 309.449548] mv2112_update_link: 3.0x901(1G): 0x80 [ 309.450251] mv2112_update_link: 3.0x8109(100M): 0x0 [ 309.450301] mv2112_update_link: link 0x0 [ 309.450345] mv2112_read_status: autoneg is disabled [ 310.061313] i2c_geni 980000.i2c: i2c error :-107 [ 310.068155] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 310.089293] i2c_geni 980000.i2c: i2c error :-107 [ 310.094575] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 310.472647] mv2112_read_status [ 310.472996] mv2112_update_link: 3.0x901(1G): 0x80 [ 310.473308] mv2112_update_link: 3.0x8109(100M): 0x0 [ 310.473352] mv2112_update_link: link 0x0 [ 310.473394] mv2112_read_status: autoneg is disabled [ 311.203786] init: starting service 'qvrd_vndr'... [ 311.211462] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 311.218441] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 311.278343] init: starting service 'sxrd'... [ 311.316071] init: Service 'qvrd_vndr' (pid 3992) exited with status 1 [ 311.316103] init: Sending signal 9 to service 'qvrd_vndr' (pid 3992) process group... [ 311.316399] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3992 in 0ms [ 311.345626] init: Service 'sxrd' (pid 3993) exited with status 1 [ 311.345716] init: Sending signal 9 to service 'sxrd' (pid 3993) process group... [ 311.346387] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3993 in 0ms [ 311.496510] mv2112_read_status [ 311.496800] mv2112_update_link: 3.0x901(1G): 0x80 [ 311.497069] mv2112_update_link: 3.0x8109(100M): 0x0 [ 311.497097] mv2112_update_link: link 0x0 [ 311.497126] mv2112_read_status: autoneg is disabled [ 312.107547] i2c_geni 980000.i2c: i2c error :-107 [ 312.113385] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 312.124716] i2c_geni 980000.i2c: i2c error :-107 [ 312.129754] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 312.520615] mv2112_read_status [ 312.520949] mv2112_update_link: 3.0x901(1G): 0x80 [ 312.521260] mv2112_update_link: 3.0x8109(100M): 0x0 [ 312.521302] mv2112_update_link: link 0x0 [ 312.521345] mv2112_read_status: autoneg is disabled [ 313.544919] mv2112_read_status [ 313.545343] mv2112_update_link: 3.0x901(1G): 0x80 [ 313.545654] mv2112_update_link: 3.0x8109(100M): 0x0 [ 313.545699] mv2112_update_link: link 0x0 [ 313.545741] mv2112_read_status: autoneg is disabled [ 314.155425] i2c_geni 980000.i2c: i2c error :-107 [ 314.160827] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 314.171871] i2c_geni 980000.i2c: i2c error :-107 [ 314.176922] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 314.569355] mv2112_read_status [ 314.569984] mv2112_update_link: 3.0x901(1G): 0x80 [ 314.570398] mv2112_update_link: 3.0x8109(100M): 0x0 [ 314.570442] mv2112_update_link: link 0x0 [ 314.570485] mv2112_read_status: autoneg is disabled [ 315.593195] mv2112_read_status [ 315.593512] mv2112_update_link: 3.0x901(1G): 0x80 [ 315.594270] mv2112_update_link: 3.0x8109(100M): 0x0 [ 315.594314] mv2112_update_link: link 0x0 [ 315.594356] mv2112_read_status: autoneg is disabled [ 316.204482] i2c_geni 980000.i2c: i2c error :-107 [ 316.212234] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 316.226221] i2c_geni 980000.i2c: i2c error :-107 [ 316.231238] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 316.261610] init: starting service 'qvrd_vndr'... [ 316.266183] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 316.274600] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 316.335173] init: starting service 'sxrd'... [ 316.365581] init: Service 'qvrd_vndr' (pid 3995) exited with status 1 [ 316.365620] init: Sending signal 9 to service 'qvrd_vndr' (pid 3995) process group... [ 316.365866] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3995 in 0ms [ 316.413890] init: Service 'sxrd' (pid 3996) exited with status 1 [ 316.414301] init: Sending signal 9 to service 'sxrd' (pid 3996) process group... [ 316.415675] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3996 in 1ms [ 316.616719] mv2112_read_status [ 316.617133] mv2112_update_link: 3.0x901(1G): 0x80 [ 316.617443] mv2112_update_link: 3.0x8109(100M): 0x0 [ 316.617487] mv2112_update_link: link 0x0 [ 316.617529] mv2112_read_status: autoneg is disabled [ 317.640786] mv2112_read_status [ 317.641105] mv2112_update_link: 3.0x901(1G): 0x80 [ 317.641895] mv2112_update_link: 3.0x8109(100M): 0x0 [ 317.641939] mv2112_update_link: link 0x0 [ 317.641982] mv2112_read_status: autoneg is disabled [ 318.250739] i2c_geni 980000.i2c: i2c error :-107 [ 318.257018] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 318.268915] i2c_geni 980000.i2c: i2c error :-107 [ 318.273839] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 318.664878] mv2112_read_status [ 318.665220] mv2112_update_link: 3.0x901(1G): 0x80 [ 318.665529] mv2112_update_link: 3.0x8109(100M): 0x0 [ 318.665573] mv2112_update_link: link 0x0 [ 318.665798] mv2112_read_status: autoneg is disabled [ 319.689184] mv2112_read_status [ 319.689551] mv2112_update_link: 3.0x901(1G): 0x80 [ 319.689860] mv2112_update_link: 3.0x8109(100M): 0x0 [ 319.689903] mv2112_update_link: link 0x0 [ 319.689947] mv2112_read_status: autoneg is disabled [ 320.299835] i2c_geni 980000.i2c: i2c error :-107 [ 320.305123] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 320.315666] i2c_geni 980000.i2c: i2c error :-107 [ 320.320803] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 320.712712] mv2112_read_status [ 320.713049] mv2112_update_link: 3.0x901(1G): 0x80 [ 320.713358] mv2112_update_link: 3.0x8109(100M): 0x0 [ 320.713401] mv2112_update_link: link 0x0 [ 320.713444] mv2112_read_status: autoneg is disabled [ 321.320855] init: starting service 'qvrd_vndr'... [ 321.326627] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 321.332899] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 321.398604] init: starting service 'sxrd'... [ 321.436969] init: Service 'qvrd_vndr' (pid 3999) exited with status 1 [ 321.437003] init: Sending signal 9 to service 'qvrd_vndr' (pid 3999) process group... [ 321.437238] libprocessgroup: Successfully killed process cgroup uid 1000 pid 3999 in 0ms [ 321.478466] init: Service 'sxrd' (pid 4000) exited with status 1 [ 321.478608] init: Sending signal 9 to service 'sxrd' (pid 4000) process group... [ 321.479590] libprocessgroup: Successfully killed process cgroup uid 1000 pid 4000 in 0ms [ 321.737008] mv2112_read_status [ 321.737363] mv2112_update_link: 3.0x901(1G): 0x80 [ 321.737674] mv2112_update_link: 3.0x8109(100M): 0x0 [ 321.737717] mv2112_update_link: link 0x0 [ 321.737760] mv2112_read_status: autoneg is disabled [ 322.349053] i2c_geni 980000.i2c: i2c error :-107 [ 322.354299] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 322.365962] i2c_geni 980000.i2c: i2c error :-107 [ 322.371814] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 322.760947] mv2112_read_status [ 322.761347] mv2112_update_link: 3.0x901(1G): 0x80 [ 322.761655] mv2112_update_link: 3.0x8109(100M): 0x0 [ 322.761698] mv2112_update_link: link 0x0 [ 322.761741] mv2112_read_status: autoneg is disabled [ 323.784874] mv2112_read_status [ 323.785253] mv2112_update_link: 3.0x901(1G): 0x80 [ 323.785589] mv2112_update_link: 3.0x8109(100M): 0x0 [ 323.785633] mv2112_update_link: link 0x0 [ 323.785675] mv2112_read_status: autoneg is disabled [ 324.395039] i2c_geni 980000.i2c: i2c error :-107 [ 324.400154] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 324.413368] i2c_geni 980000.i2c: i2c error :-107 [ 324.418621] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 324.808666] mv2112_read_status [ 324.809291] mv2112_update_link: 3.0x901(1G): 0x80 [ 324.809599] mv2112_update_link: 3.0x8109(100M): 0x0 [ 324.809643] mv2112_update_link: link 0x0 [ 324.809686] mv2112_read_status: autoneg is disabled [ 325.832556] mv2112_read_status [ 325.832839] mv2112_update_link: 3.0x901(1G): 0x80 [ 325.833097] mv2112_update_link: 3.0x8109(100M): 0x0 [ 325.833187] mv2112_update_link: link 0x0 [ 325.833214] mv2112_read_status: autoneg is disabled [ 326.385211] init: starting service 'qvrd_vndr'... [ 326.393872] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 326.401475] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 326.442202] i2c_geni 980000.i2c: i2c error :-107 [ 326.447163] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 326.457678] i2c_geni 980000.i2c: i2c error :-107 [ 326.462068] init: starting service 'sxrd'... [ 326.462665] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 326.492411] init: Service 'qvrd_vndr' (pid 4004) exited with status 1 [ 326.492440] init: Sending signal 9 to service 'qvrd_vndr' (pid 4004) process group... [ 326.492687] libprocessgroup: Successfully killed process cgroup uid 1000 pid 4004 in 0ms [ 326.531067] init: Service 'sxrd' (pid 4005) exited with status 1 [ 326.531245] init: Sending signal 9 to service 'sxrd' (pid 4005) process group... [ 326.533264] libprocessgroup: Successfully killed process cgroup uid 1000 pid 4005 in 1ms [ 326.856862] mv2112_read_status [ 326.857222] mv2112_update_link: 3.0x901(1G): 0x80 [ 326.857913] mv2112_update_link: 3.0x8109(100M): 0x0 [ 326.857958] mv2112_update_link: link 0x0 [ 326.858001] mv2112_read_status: autoneg is disabled [ 327.880849] mv2112_read_status [ 327.881176] mv2112_update_link: 3.0x901(1G): 0x80 [ 327.881485] mv2112_update_link: 3.0x8109(100M): 0x0 [ 327.881528] mv2112_update_link: link 0x0 [ 327.881570] mv2112_read_status: autoneg is disabled [ 328.490120] i2c_geni 980000.i2c: i2c error :-107 [ 328.495206] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 328.507777] i2c_geni 980000.i2c: i2c error :-107 [ 328.512747] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 328.904842] mv2112_read_status [ 328.905190] mv2112_update_link: 3.0x901(1G): 0x80 [ 328.905500] mv2112_update_link: 3.0x8109(100M): 0x0 [ 328.905544] mv2112_update_link: link 0x0 [ 328.905587] mv2112_read_status: autoneg is disabled [ 329.929023] mv2112_read_status [ 329.929372] mv2112_update_link: 3.0x901(1G): 0x80 [ 329.929681] mv2112_update_link: 3.0x8109(100M): 0x0 [ 329.929724] mv2112_update_link: link 0x0 [ 329.929767] mv2112_read_status: autoneg is disabled [ 330.539925] i2c_geni 980000.i2c: i2c error :-107 [ 330.545213] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 330.559749] i2c_geni 980000.i2c: i2c error :-107 [ 330.564931] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 330.952968] mv2112_read_status [ 330.953328] mv2112_update_link: 3.0x901(1G): 0x80 [ 330.953634] mv2112_update_link: 3.0x8109(100M): 0x0 [ 330.953678] mv2112_update_link: link 0x0 [ 330.953722] mv2112_read_status: autoneg is disabled [ 331.450658] init: starting service 'qvrd_vndr'... [ 331.457046] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 331.462746] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 331.520104] init: starting service 'sxrd'... [ 331.555045] init: Service 'qvrd_vndr' (pid 4007) exited with status 1 [ 331.555075] init: Sending signal 9 to service 'qvrd_vndr' (pid 4007) process group... [ 331.555288] libprocessgroup: Successfully killed process cgroup uid 1000 pid 4007 in 0ms [ 331.598576] init: Service 'sxrd' (pid 4008) exited with status 1 [ 331.598670] init: Sending signal 9 to service 'sxrd' (pid 4008) process group... [ 331.599393] libprocessgroup: Successfully killed process cgroup uid 1000 pid 4008 in 0ms [ 331.977209] mv2112_read_status [ 331.977816] mv2112_update_link: 3.0x901(1G): 0x80 [ 331.978230] mv2112_update_link: 3.0x8109(100M): 0x0 [ 331.978275] mv2112_update_link: link 0x0 [ 331.978318] mv2112_read_status: autoneg is disabled [ 332.587691] i2c_geni 980000.i2c: i2c error :-107 [ 332.598181] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 332.609382] i2c_geni 980000.i2c: i2c error :-107 [ 332.614328] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 333.000694] mv2112_read_status [ 333.001028] mv2112_update_link: 3.0x901(1G): 0x80 [ 333.001346] mv2112_update_link: 3.0x8109(100M): 0x0 [ 333.001389] mv2112_update_link: link 0x0 [ 333.001431] mv2112_read_status: autoneg is disabled [ 334.024887] mv2112_read_status [ 334.025217] mv2112_update_link: 3.0x901(1G): 0x80 [ 334.025525] mv2112_update_link: 3.0x8109(100M): 0x0 [ 334.025568] mv2112_update_link: link 0x0 [ 334.025611] mv2112_read_status: autoneg is disabled [ 334.635729] i2c_geni 980000.i2c: i2c error :-107 [ 334.641081] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 334.656808] i2c_geni 980000.i2c: i2c error :-107 [ 334.662189] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 335.049096] mv2112_read_status [ 335.049437] mv2112_update_link: 3.0x901(1G): 0x80 [ 335.049767] mv2112_update_link: 3.0x8109(100M): 0x0 [ 335.049810] mv2112_update_link: link 0x0 [ 335.049854] mv2112_read_status: autoneg is disabled [ 336.072687] mv2112_read_status [ 336.072960] mv2112_update_link: 3.0x901(1G): 0x80 [ 336.073209] mv2112_update_link: 3.0x8109(100M): 0x0 [ 336.073234] mv2112_update_link: link 0x0 [ 336.073260] mv2112_read_status: autoneg is disabled [ 336.503941] init: starting service 'qvrd_vndr'... [ 336.510772] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 336.517962] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 336.579853] init: starting service 'sxrd'... [ 336.602434] init: Service 'qvrd_vndr' (pid 4010) exited with status 1 [ 336.602462] init: Sending signal 9 to service 'qvrd_vndr' (pid 4010) process group... [ 336.602664] libprocessgroup: Successfully killed process cgroup uid 1000 pid 4010 in 0ms [ 336.653538] init: Service 'sxrd' (pid 4011) exited with status 1 [ 336.653563] init: Sending signal 9 to service 'sxrd' (pid 4011) process group... [ 336.653764] libprocessgroup: Successfully killed process cgroup uid 1000 pid 4011 in 0ms [ 336.683593] i2c_geni 980000.i2c: i2c error :-107 [ 336.689144] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 336.700913] i2c_geni 980000.i2c: i2c error :-107 [ 336.706106] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 337.097198] mv2112_read_status [ 337.097553] mv2112_update_link: 3.0x901(1G): 0x80 [ 337.097862] mv2112_update_link: 3.0x8109(100M): 0x0 [ 337.097906] mv2112_update_link: link 0x0 [ 337.097948] mv2112_read_status: autoneg is disabled [ 338.121316] mv2112_read_status [ 338.122068] mv2112_update_link: 3.0x901(1G): 0x80 [ 338.122389] mv2112_update_link: 3.0x8109(100M): 0x0 [ 338.122432] mv2112_update_link: link 0x0 [ 338.122474] mv2112_read_status: autoneg is disabled [ 338.733073] i2c_geni 980000.i2c: i2c error :-107 [ 338.738158] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 338.749721] i2c_geni 980000.i2c: i2c error :-107 [ 338.754727] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 339.144501] mv2112_read_status [ 339.145030] mv2112_update_link: 3.0x901(1G): 0x80 [ 339.145405] mv2112_update_link: 3.0x8109(100M): 0x0 [ 339.145431] mv2112_update_link: link 0x0 [ 339.145456] mv2112_read_status: autoneg is disabled [ 340.168745] mv2112_read_status [ 340.169331] mv2112_update_link: 3.0x901(1G): 0x80 [ 340.169599] mv2112_update_link: 3.0x8109(100M): 0x0 [ 340.169625] mv2112_update_link: link 0x0 [ 340.169659] mv2112_read_status: autoneg is disabled [ 340.778349] i2c_geni 980000.i2c: i2c error :-107 [ 340.783968] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 340.795373] i2c_geni 980000.i2c: i2c error :-107 [ 340.800435] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 341.204471] mv2112_read_status [ 341.204773] mv2112_update_link: 3.0x901(1G): 0x80 [ 341.205042] mv2112_update_link: 3.0x8109(100M): 0x0 [ 341.205071] mv2112_update_link: link 0x0 [ 341.205100] mv2112_read_status: autoneg is disabled [ 341.563899] init: starting service 'qvrd_vndr'... [ 341.567783] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 341.571235] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 341.620997] init: starting service 'sxrd'... [ 341.651928] init: Service 'qvrd_vndr' (pid 4013) exited with status 1 [ 341.651960] init: Sending signal 9 to service 'qvrd_vndr' (pid 4013) process group... [ 341.652181] libprocessgroup: Successfully killed process cgroup uid 1000 pid 4013 in 0ms [ 341.695118] init: Service 'sxrd' (pid 4014) exited with status 1 [ 341.695213] init: Sending signal 9 to service 'sxrd' (pid 4014) process group... [ 341.695894] libprocessgroup: Successfully killed process cgroup uid 1000 pid 4014 in 0ms [ 342.223824] mv2112_read_status [ 342.224126] mv2112_update_link: 3.0x901(1G): 0x80 [ 342.225414] mv2112_update_link: 3.0x8109(100M): 0x0 [ 342.225445] mv2112_update_link: link 0x0 [ 342.225474] mv2112_read_status: autoneg is disabled [ 342.826102] i2c_geni 980000.i2c: i2c error :-107 [ 342.831449] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 342.845272] i2c_geni 980000.i2c: i2c error :-107 [ 342.850810] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 343.240551] mv2112_read_status [ 343.240827] mv2112_update_link: 3.0x901(1G): 0x80 [ 343.241071] mv2112_update_link: 3.0x8109(100M): 0x0 [ 343.241095] mv2112_update_link: link 0x0 [ 343.241117] mv2112_read_status: autoneg is disabled [ 344.265153] mv2112_read_status [ 344.265652] mv2112_update_link: 3.0x901(1G): 0x80 [ 344.265920] mv2112_update_link: 3.0x8109(100M): 0x0 [ 344.265948] mv2112_update_link: link 0x0 [ 344.265976] mv2112_read_status: autoneg is disabled [ 344.874670] i2c_geni 980000.i2c: i2c error :-107 [ 344.882661] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 344.894089] i2c_geni 980000.i2c: i2c error :-107 [ 344.899126] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 345.288849] mv2112_read_status [ 345.289140] mv2112_update_link: 3.0x901(1G): 0x80 [ 345.289400] mv2112_update_link: 3.0x8109(100M): 0x0 [ 345.289426] mv2112_update_link: link 0x0 [ 345.289452] mv2112_read_status: autoneg is disabled [ 346.120845] kworker/dying (124) used greatest stack depth: 9120 bytes left [ 346.313220] mv2112_read_status [ 346.313575] mv2112_update_link: 3.0x901(1G): 0x80 [ 346.314383] mv2112_update_link: 3.0x8109(100M): 0x0 [ 346.314428] mv2112_update_link: link 0x0 [ 346.314471] mv2112_read_status: autoneg is disabled [ 346.608559] init: starting service 'qvrd_vndr'... [ 346.616132] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 346.623797] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 346.680244] init: starting service 'sxrd'... [ 346.702748] init: Service 'qvrd_vndr' (pid 4016) exited with status 1 [ 346.702776] init: Sending signal 9 to service 'qvrd_vndr' (pid 4016) process group... [ 346.703014] libprocessgroup: Successfully killed process cgroup uid 1000 pid 4016 in 0ms [ 346.760065] init: Service 'sxrd' (pid 4017) exited with status 1 [ 346.760101] init: Sending signal 9 to service 'sxrd' (pid 4017) process group... [ 346.760444] libprocessgroup: Successfully killed process cgroup uid 1000 pid 4017 in 0ms [ 346.925339] i2c_geni 980000.i2c: i2c error :-107 [ 346.930539] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 346.943260] i2c_geni 980000.i2c: i2c error :-107 [ 346.949188] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 347.336646] mv2112_read_status [ 347.336991] mv2112_update_link: 3.0x901(1G): 0x80 [ 347.337301] mv2112_update_link: 3.0x8109(100M): 0x0 [ 347.337345] mv2112_update_link: link 0x0 [ 347.337387] mv2112_read_status: autoneg is disabled [ 348.360870] mv2112_read_status [ 348.361185] mv2112_update_link: 3.0x901(1G): 0x80 [ 348.361491] mv2112_update_link: 3.0x8109(100M): 0x0 [ 348.361534] mv2112_update_link: link 0x0 [ 348.361576] mv2112_read_status: autoneg is disabled [ 348.971590] i2c_geni 980000.i2c: i2c error :-107 [ 348.976876] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 348.988986] i2c_geni 980000.i2c: i2c error :-107 [ 348.993932] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 349.173309] spss_utils [spss_wait_for_event]: wait for event [1] timeout [300] sec expired [ 349.384813] mv2112_read_status [ 349.385157] mv2112_update_link: 3.0x901(1G): 0x80 [ 349.385477] mv2112_update_link: 3.0x8109(100M): 0x0 [ 349.385520] mv2112_update_link: link 0x0 [ 349.385563] mv2112_read_status: autoneg is disabled [ 350.409220] mv2112_read_status [ 350.409988] mv2112_update_link: 3.0x901(1G): 0x80 [ 350.410298] mv2112_update_link: 3.0x8109(100M): 0x0 [ 350.410342] mv2112_update_link: link 0x0 [ 350.410385] mv2112_read_status: autoneg is disabled [ 351.019940] i2c_geni 980000.i2c: i2c error :-107 [ 351.025248] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 351.038548] i2c_geni 980000.i2c: i2c error :-107 [ 351.043520] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 351.432702] mv2112_read_status [ 351.433072] mv2112_update_link: 3.0x901(1G): 0x80 [ 351.433421] mv2112_update_link: 3.0x8109(100M): 0x0 [ 351.433465] mv2112_update_link: link 0x0 [ 351.433508] mv2112_read_status: autoneg is disabled [ 351.667391] init: starting service 'qvrd_vndr'... [ 351.675360] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 351.686794] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 351.741407] init: starting service 'sxrd'... [ 351.763194] init: Service 'qvrd_vndr' (pid 4019) exited with status 1 [ 351.763220] init: Sending signal 9 to service 'qvrd_vndr' (pid 4019) process group... [ 351.763422] libprocessgroup: Successfully killed process cgroup uid 1000 pid 4019 in 0ms [ 351.800611] init: Service 'sxrd' (pid 4020) exited with status 1 [ 351.800649] init: Sending signal 9 to service 'sxrd' (pid 4020) process group... [ 351.800958] libprocessgroup: Successfully killed process cgroup uid 1000 pid 4020 in 0ms [ 352.456864] mv2112_read_status [ 352.457215] mv2112_update_link: 3.0x901(1G): 0x80 [ 352.457536] mv2112_update_link: 3.0x8109(100M): 0x0 [ 352.457580] mv2112_update_link: link 0x0 [ 352.457622] mv2112_read_status: autoneg is disabled [ 353.069152] i2c_geni 980000.i2c: i2c error :-107 [ 353.074263] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 353.086049] i2c_geni 980000.i2c: i2c error :-107 [ 353.091074] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 353.480611] mv2112_read_status [ 353.480914] mv2112_update_link: 3.0x901(1G): 0x80 [ 353.481198] mv2112_update_link: 3.0x8109(100M): 0x0 [ 353.481237] mv2112_update_link: link 0x0 [ 353.481275] mv2112_read_status: autoneg is disabled [ 354.504916] mv2112_read_status [ 354.505252] mv2112_update_link: 3.0x901(1G): 0x80 [ 354.505562] mv2112_update_link: 3.0x8109(100M): 0x0 [ 354.505605] mv2112_update_link: link 0x0 [ 354.505647] mv2112_read_status: autoneg is disabled [ 355.116445] i2c_geni 980000.i2c: i2c error :-107 [ 355.121545] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 355.134151] i2c_geni 980000.i2c: i2c error :-107 [ 355.139331] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 355.528966] mv2112_read_status [ 355.529294] mv2112_update_link: 3.0x901(1G): 0x80 [ 355.529603] mv2112_update_link: 3.0x8109(100M): 0x0 [ 355.529646] mv2112_update_link: link 0x0 [ 355.529689] mv2112_read_status: autoneg is disabled [ 356.552888] mv2112_read_status [ 356.553573] mv2112_update_link: 3.0x901(1G): 0x80 [ 356.553892] mv2112_update_link: 3.0x8109(100M): 0x0 [ 356.553936] mv2112_update_link: link 0x0 [ 356.553979] mv2112_read_status: autoneg is disabled [ 356.729082] init: starting service 'qvrd_vndr'... [ 356.737240] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 356.743959] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 356.799742] init: starting service 'sxrd'... [ 356.823080] init: Service 'qvrd_vndr' (pid 4022) exited with status 1 [ 356.823107] init: Sending signal 9 to service 'qvrd_vndr' (pid 4022) process group... [ 356.823309] libprocessgroup: Successfully killed process cgroup uid 1000 pid 4022 in 0ms [ 356.873532] init: Service 'sxrd' (pid 4023) exited with status 1 [ 356.873561] init: Sending signal 9 to service 'sxrd' (pid 4023) process group... [ 356.873776] libprocessgroup: Successfully killed process cgroup uid 1000 pid 4023 in 0ms [ 357.164156] i2c_geni 980000.i2c: i2c error :-107 [ 357.169285] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 357.180461] i2c_geni 980000.i2c: i2c error :-107 [ 357.185549] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 357.576806] mv2112_read_status [ 357.577153] mv2112_update_link: 3.0x901(1G): 0x80 [ 357.577463] mv2112_update_link: 3.0x8109(100M): 0x0 [ 357.577506] mv2112_update_link: link 0x0 [ 357.577549] mv2112_read_status: autoneg is disabled [ 358.600827] mv2112_read_status [ 358.601156] mv2112_update_link: 3.0x901(1G): 0x80 [ 358.601467] mv2112_update_link: 3.0x8109(100M): 0x0 [ 358.601510] mv2112_update_link: link 0x0 [ 358.601552] mv2112_read_status: autoneg is disabled [ 359.212502] i2c_geni 980000.i2c: i2c error :-107 [ 359.217808] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 359.229106] i2c_geni 980000.i2c: i2c error :-107 [ 359.234031] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 359.625213] mv2112_read_status [ 359.625913] mv2112_update_link: 3.0x901(1G): 0x80 [ 359.626224] mv2112_update_link: 3.0x8109(100M): 0x0 [ 359.626287] mv2112_update_link: link 0x0 [ 359.626330] mv2112_read_status: autoneg is disabled [ 360.649206] mv2112_read_status [ 360.649573] mv2112_update_link: 3.0x901(1G): 0x80 [ 360.649883] mv2112_update_link: 3.0x8109(100M): 0x0 [ 360.649927] mv2112_update_link: link 0x0 [ 360.649970] mv2112_read_status: autoneg is disabled [ 361.258134] i2c_geni 980000.i2c: i2c error :-107 [ 361.263765] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 361.274269] i2c_geni 980000.i2c: i2c error :-107 [ 361.279509] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 361.673228] mv2112_read_status [ 361.673603] mv2112_update_link: 3.0x901(1G): 0x80 [ 361.674432] mv2112_update_link: 3.0x8109(100M): 0x0 [ 361.674477] mv2112_update_link: link 0x0 [ 361.674520] mv2112_read_status: autoneg is disabled [ 361.786570] init: starting service 'qvrd_vndr'... [ 361.795669] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 361.803788] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 361.861946] init: starting service 'sxrd'... [ 361.882380] init: Service 'qvrd_vndr' (pid 4025) exited with status 1 [ 361.882407] init: Sending signal 9 to service 'qvrd_vndr' (pid 4025) process group... [ 361.882601] libprocessgroup: Successfully killed process cgroup uid 1000 pid 4025 in 0ms [ 361.916580] init: Service 'sxrd' (pid 4026) exited with status 1 [ 361.916608] init: Sending signal 9 to service 'sxrd' (pid 4026) process group... [ 361.916829] libprocessgroup: Successfully killed process cgroup uid 1000 pid 4026 in 0ms [ 362.696694] mv2112_read_status [ 362.697043] mv2112_update_link: 3.0x901(1G): 0x80 [ 362.697355] mv2112_update_link: 3.0x8109(100M): 0x0 [ 362.697398] mv2112_update_link: link 0x0 [ 362.697441] mv2112_read_status: autoneg is disabled [ 363.307756] i2c_geni 980000.i2c: i2c error :-107 [ 363.312784] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 363.323265] i2c_geni 980000.i2c: i2c error :-107 [ 363.328254] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 363.720637] mv2112_read_status [ 363.720958] mv2112_update_link: 3.0x901(1G): 0x80 [ 363.721266] mv2112_update_link: 3.0x8109(100M): 0x0 [ 363.721309] mv2112_update_link: link 0x0 [ 363.721352] mv2112_read_status: autoneg is disabled [ 364.744687] mv2112_read_status [ 364.745012] mv2112_update_link: 3.0x901(1G): 0x80 [ 364.745320] mv2112_update_link: 3.0x8109(100M): 0x0 [ 364.745364] mv2112_update_link: link 0x0 [ 364.745406] mv2112_read_status: autoneg is disabled [ 365.354423] i2c_geni 980000.i2c: i2c error :-107 [ 365.359467] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 365.370940] i2c_geni 980000.i2c: i2c error :-107 [ 365.375812] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 365.768666] mv2112_read_status [ 365.768918] mv2112_update_link: 3.0x901(1G): 0x80 [ 365.769152] mv2112_update_link: 3.0x8109(100M): 0x0 [ 365.769169] mv2112_update_link: link 0x0 [ 365.769186] mv2112_read_status: autoneg is disabled [ 366.640079] perf: interrupt took too long (4959 > 4957), lowering kernel.perf_event_max_sample_rate to 40250 [ 366.798989] mv2112_read_status [ 366.799245] mv2112_update_link: 3.0x901(1G): 0x80 [ 366.799481] mv2112_update_link: 3.0x8109(100M): 0x0 [ 366.799499] mv2112_update_link: link 0x0 [ 366.799516] mv2112_read_status: autoneg is disabled [ 366.846611] init: starting service 'qvrd_vndr'... [ 366.849901] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 366.852477] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 366.882084] init: starting service 'sxrd'... [ 366.929016] init: Service 'qvrd_vndr' (pid 4028) exited with status 1 [ 366.929047] init: Sending signal 9 to service 'qvrd_vndr' (pid 4028) process group... [ 366.929316] libprocessgroup: Successfully killed process cgroup uid 1000 pid 4028 in 0ms [ 366.933992] init: Service 'sxrd' (pid 4029) exited with status 1 [ 366.934016] init: Sending signal 9 to service 'sxrd' (pid 4029) process group... [ 366.934200] libprocessgroup: Successfully killed process cgroup uid 1000 pid 4029 in 0ms [ 367.402735] i2c_geni 980000.i2c: i2c error :-107 [ 367.409554] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 367.422146] i2c_geni 980000.i2c: i2c error :-107 [ 367.427592] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 367.816831] mv2112_read_status [ 367.817179] mv2112_update_link: 3.0x901(1G): 0x80 [ 367.817527] mv2112_update_link: 3.0x8109(100M): 0x0 [ 367.817571] mv2112_update_link: link 0x0 [ 367.817613] mv2112_read_status: autoneg is disabled [ 368.840926] mv2112_read_status [ 368.841290] mv2112_update_link: 3.0x901(1G): 0x80 [ 368.841600] mv2112_update_link: 3.0x8109(100M): 0x0 [ 368.841643] mv2112_update_link: link 0x0 [ 368.841687] mv2112_read_status: autoneg is disabled [ 369.453072] i2c_geni 980000.i2c: i2c error :-107 [ 369.458354] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 369.469377] i2c_geni 980000.i2c: i2c error :-107 [ 369.474319] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 369.864842] mv2112_read_status [ 369.865186] mv2112_update_link: 3.0x901(1G): 0x80 [ 369.865504] mv2112_update_link: 3.0x8109(100M): 0x0 [ 369.865548] mv2112_update_link: link 0x0 [ 369.865593] mv2112_read_status: autoneg is disabled [ 370.889279] mv2112_read_status [ 370.889609] mv2112_update_link: 3.0x901(1G): 0x80 [ 370.889936] mv2112_update_link: 3.0x8109(100M): 0x0 [ 370.889980] mv2112_update_link: link 0x0 [ 370.890022] mv2112_read_status: autoneg is disabled [ 371.498647] i2c_geni 980000.i2c: i2c error :-107 [ 371.505916] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 371.517011] i2c_geni 980000.i2c: i2c error :-107 [ 371.522041] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 371.878338] init: starting service 'qvrd_vndr'... [ 371.886549] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 371.894017] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 371.912493] mv2112_read_status [ 371.912773] mv2112_update_link: 3.0x901(1G): 0x80 [ 371.913027] mv2112_update_link: 3.0x8109(100M): 0x0 [ 371.913052] mv2112_update_link: link 0x0 [ 371.913076] mv2112_read_status: autoneg is disabled [ 371.960697] init: starting service 'sxrd'... [ 371.985223] init: Service 'qvrd_vndr' (pid 4033) exited with status 1 [ 371.985257] init: Sending signal 9 to service 'qvrd_vndr' (pid 4033) process group... [ 371.985492] libprocessgroup: Successfully killed process cgroup uid 1000 pid 4033 in 0ms [ 372.033397] init: Service 'sxrd' (pid 4034) exited with status 1 [ 372.033422] init: Sending signal 9 to service 'sxrd' (pid 4034) process group... [ 372.033625] libprocessgroup: Successfully killed process cgroup uid 1000 pid 4034 in 0ms [ 372.936877] mv2112_read_status [ 372.937241] mv2112_update_link: 3.0x901(1G): 0x80 [ 372.937551] mv2112_update_link: 3.0x8109(100M): 0x0 [ 372.937595] mv2112_update_link: link 0x0 [ 372.937638] mv2112_read_status: autoneg is disabled [ 373.547393] i2c_geni 980000.i2c: i2c error :-107 [ 373.552637] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 373.563609] i2c_geni 980000.i2c: i2c error :-107 [ 373.568839] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 373.960655] mv2112_read_status [ 373.960975] mv2112_update_link: 3.0x901(1G): 0x80 [ 373.961284] mv2112_update_link: 3.0x8109(100M): 0x0 [ 373.961327] mv2112_update_link: link 0x0 [ 373.961369] mv2112_read_status: autoneg is disabled [ 374.984854] mv2112_read_status [ 374.985220] mv2112_update_link: 3.0x901(1G): 0x80 [ 374.985533] mv2112_update_link: 3.0x8109(100M): 0x0 [ 374.985577] mv2112_update_link: link 0x0 [ 374.985620] mv2112_read_status: autoneg is disabled [ 375.595677] i2c_geni 980000.i2c: i2c error :-107 [ 375.600834] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 375.611491] i2c_geni 980000.i2c: i2c error :-107 [ 375.616491] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 376.009234] mv2112_read_status [ 376.009560] mv2112_update_link: 3.0x901(1G): 0x80 [ 376.009868] mv2112_update_link: 3.0x8109(100M): 0x0 [ 376.009911] mv2112_update_link: link 0x0 [ 376.009953] mv2112_read_status: autoneg is disabled [ 376.948047] init: starting service 'qvrd_vndr'... [ 376.963159] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 376.970082] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 377.024187] init: starting service 'sxrd'... [ 377.032868] mv2112_read_status [ 377.033187] mv2112_update_link: 3.0x901(1G): 0x80 [ 377.033548] mv2112_update_link: 3.0x8109(100M): 0x0 [ 377.033592] mv2112_update_link: link 0x0 [ 377.033635] mv2112_read_status: autoneg is disabled [ 377.043177] init: Service 'qvrd_vndr' (pid 4036) exited with status 1 [ 377.043211] init: Sending signal 9 to service 'qvrd_vndr' (pid 4036) process group... [ 377.043454] libprocessgroup: Successfully killed process cgroup uid 1000 pid 4036 in 0ms [ 377.084375] init: Service 'sxrd' (pid 4037) exited with status 1 [ 377.084408] init: Sending signal 9 to service 'sxrd' (pid 4037) process group... [ 377.084678] libprocessgroup: Successfully killed process cgroup uid 1000 pid 4037 in 0ms [ 377.644036] i2c_geni 980000.i2c: i2c error :-107 [ 377.654002] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 377.665200] i2c_geni 980000.i2c: i2c error :-107 [ 377.670154] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 378.056668] mv2112_read_status [ 378.057016] mv2112_update_link: 3.0x901(1G): 0x80 [ 378.057335] mv2112_update_link: 3.0x8109(100M): 0x0 [ 378.057378] mv2112_update_link: link 0x0 [ 378.057421] mv2112_read_status: autoneg is disabled [ 379.080817] mv2112_read_status [ 379.081144] mv2112_update_link: 3.0x901(1G): 0x80 [ 379.081450] mv2112_update_link: 3.0x8109(100M): 0x0 [ 379.081493] mv2112_update_link: link 0x0 [ 379.081535] mv2112_read_status: autoneg is disabled [ 379.692127] i2c_geni 980000.i2c: i2c error :-107 [ 379.697458] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 379.711253] i2c_geni 980000.i2c: i2c error :-107 [ 379.716722] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 380.104639] mv2112_read_status [ 380.105215] mv2112_update_link: 3.0x901(1G): 0x80 [ 380.105626] mv2112_update_link: 3.0x8109(100M): 0x0 [ 380.105670] mv2112_update_link: link 0x0 [ 380.105712] mv2112_read_status: autoneg is disabled [ 381.129145] mv2112_read_status [ 381.129490] mv2112_update_link: 3.0x901(1G): 0x80 [ 381.130151] mv2112_update_link: 3.0x8109(100M): 0x0 [ 381.130197] mv2112_update_link: link 0x0 [ 381.130241] mv2112_read_status: autoneg is disabled [ 381.740500] i2c_geni 980000.i2c: i2c error :-107 [ 381.745653] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 381.757929] i2c_geni 980000.i2c: i2c error :-107 [ 381.763963] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 382.010247] init: starting service 'qvrd_vndr'... [ 382.018978] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 382.027000] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 382.082013] init: starting service 'sxrd'... [ 382.103030] init: Service 'qvrd_vndr' (pid 4041) exited with status 1 [ 382.103056] init: Sending signal 9 to service 'qvrd_vndr' (pid 4041) process group... [ 382.103252] libprocessgroup: Successfully killed process cgroup uid 1000 pid 4041 in 0ms [ 382.142352] init: Service 'sxrd' (pid 4042) exited with status 1 [ 382.142397] init: Sending signal 9 to service 'sxrd' (pid 4042) process group... [ 382.142744] libprocessgroup: Successfully killed process cgroup uid 1000 pid 4042 in 0ms [ 382.152690] mv2112_read_status [ 382.153029] mv2112_update_link: 3.0x901(1G): 0x80 [ 382.153341] mv2112_update_link: 3.0x8109(100M): 0x0 [ 382.153385] mv2112_update_link: link 0x0 [ 382.153429] mv2112_read_status: autoneg is disabled [ 383.177152] mv2112_read_status [ 383.177473] mv2112_update_link: 3.0x901(1G): 0x80 [ 383.177781] mv2112_update_link: 3.0x8109(100M): 0x0 [ 383.177825] mv2112_update_link: link 0x0 [ 383.177866] mv2112_read_status: autoneg is disabled [ 383.787657] i2c_geni 980000.i2c: i2c error :-107 [ 383.792971] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 383.804200] i2c_geni 980000.i2c: i2c error :-107 [ 383.809135] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 384.200584] mv2112_read_status [ 384.200859] mv2112_update_link: 3.0x901(1G): 0x80 [ 384.201112] mv2112_update_link: 3.0x8109(100M): 0x0 [ 384.201137] mv2112_update_link: link 0x0 [ 384.201162] mv2112_read_status: autoneg is disabled [ 385.224898] mv2112_read_status [ 385.225248] mv2112_update_link: 3.0x901(1G): 0x80 [ 385.225991] mv2112_update_link: 3.0x8109(100M): 0x0 [ 385.226037] mv2112_update_link: link 0x0 [ 385.226080] mv2112_read_status: autoneg is disabled [ 385.835591] i2c_geni 980000.i2c: i2c error :-107 [ 385.840926] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 385.852076] i2c_geni 980000.i2c: i2c error :-107 [ 385.857059] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 386.252433] mv2112_read_status [ 386.252694] mv2112_update_link: 3.0x901(1G): 0x80 [ 386.252944] mv2112_update_link: 3.0x8109(100M): 0x0 [ 386.252963] mv2112_update_link: link 0x0 [ 386.252982] mv2112_read_status: autoneg is disabled [ 387.067203] init: starting service 'qvrd_vndr'... [ 387.078491] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 387.082843] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 387.138558] init: starting service 'sxrd'... [ 387.162131] init: Service 'qvrd_vndr' (pid 4044) exited with status 1 [ 387.162158] init: Sending signal 9 to service 'qvrd_vndr' (pid 4044) process group... [ 387.162369] libprocessgroup: Successfully killed process cgroup uid 1000 pid 4044 in 0ms [ 387.220099] init: Service 'sxrd' (pid 4045) exited with status 1 [ 387.220138] init: Sending signal 9 to service 'sxrd' (pid 4045) process group... [ 387.220580] libprocessgroup: Successfully killed process cgroup uid 1000 pid 4045 in 0ms [ 387.272685] mv2112_read_status [ 387.273032] mv2112_update_link: 3.0x901(1G): 0x80 [ 387.273342] mv2112_update_link: 3.0x8109(100M): 0x0 [ 387.273386] mv2112_update_link: link 0x0 [ 387.273429] mv2112_read_status: autoneg is disabled [ 387.883997] i2c_geni 980000.i2c: i2c error :-107 [ 387.890427] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 387.901890] i2c_geni 980000.i2c: i2c error :-107 [ 387.907615] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 388.296935] mv2112_read_status [ 388.297290] mv2112_update_link: 3.0x901(1G): 0x80 [ 388.298027] mv2112_update_link: 3.0x8109(100M): 0x0 [ 388.298071] mv2112_update_link: link 0x0 [ 388.298114] mv2112_read_status: autoneg is disabled [ 389.320775] mv2112_read_status [ 389.321109] mv2112_update_link: 3.0x901(1G): 0x80 [ 389.321760] mv2112_update_link: 3.0x8109(100M): 0x0 [ 389.321806] mv2112_update_link: link 0x0 [ 389.321849] mv2112_read_status: autoneg is disabled [ 389.933563] i2c_geni 980000.i2c: i2c error :-107 [ 389.938685] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 389.949829] i2c_geni 980000.i2c: i2c error :-107 [ 389.955136] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 390.344630] mv2112_read_status [ 390.344970] mv2112_update_link: 3.0x901(1G): 0x80 [ 390.345281] mv2112_update_link: 3.0x8109(100M): 0x0 [ 390.345325] mv2112_update_link: link 0x0 [ 390.345367] mv2112_read_status: autoneg is disabled [ 391.369088] mv2112_read_status [ 391.369439] mv2112_update_link: 3.0x901(1G): 0x80 [ 391.369749] mv2112_update_link: 3.0x8109(100M): 0x0 [ 391.369793] mv2112_update_link: link 0x0 [ 391.369836] mv2112_read_status: autoneg is disabled [ 391.980737] i2c_geni 980000.i2c: i2c error :-107 [ 391.986105] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 391.997615] i2c_geni 980000.i2c: i2c error :-107 [ 392.002837] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 392.124069] init: starting service 'qvrd_vndr'... [ 392.132788] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 392.139396] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 392.201195] init: starting service 'sxrd'... [ 392.223366] init: Service 'qvrd_vndr' (pid 4047) exited with status 1 [ 392.223403] init: Sending signal 9 to service 'qvrd_vndr' (pid 4047) process group... [ 392.223640] libprocessgroup: Successfully killed process cgroup uid 1000 pid 4047 in 0ms [ 392.274790] init: Service 'sxrd' (pid 4048) exited with status 1 [ 392.274816] init: Sending signal 9 to service 'sxrd' (pid 4048) process group... [ 392.275033] libprocessgroup: Successfully killed process cgroup uid 1000 pid 4048 in 0ms [ 392.392933] mv2112_read_status [ 392.393290] mv2112_update_link: 3.0x901(1G): 0x80 [ 392.393601] mv2112_update_link: 3.0x8109(100M): 0x0 [ 392.393644] mv2112_update_link: link 0x0 [ 392.393688] mv2112_read_status: autoneg is disabled [ 393.416570] mv2112_read_status [ 393.416858] mv2112_update_link: 3.0x901(1G): 0x80 [ 393.417119] mv2112_update_link: 3.0x8109(100M): 0x0 [ 393.417141] mv2112_update_link: link 0x0 [ 393.417164] mv2112_read_status: autoneg is disabled [ 394.029015] i2c_geni 980000.i2c: i2c error :-107 [ 394.034299] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 394.045279] i2c_geni 980000.i2c: i2c error :-107 [ 394.050188] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 394.440803] mv2112_read_status [ 394.441130] mv2112_update_link: 3.0x901(1G): 0x80 [ 394.441438] mv2112_update_link: 3.0x8109(100M): 0x0 [ 394.441481] mv2112_update_link: link 0x0 [ 394.441524] mv2112_read_status: autoneg is disabled [ 395.464798] mv2112_read_status [ 395.465116] mv2112_update_link: 3.0x901(1G): 0x80 [ 395.465422] mv2112_update_link: 3.0x8109(100M): 0x0 [ 395.465466] mv2112_update_link: link 0x0 [ 395.465508] mv2112_read_status: autoneg is disabled [ 396.075550] i2c_geni 980000.i2c: i2c error :-107 [ 396.080716] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 396.092668] i2c_geni 980000.i2c: i2c error :-107 [ 396.097719] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 396.489035] mv2112_read_status [ 396.489381] mv2112_update_link: 3.0x901(1G): 0x80 [ 396.490032] mv2112_update_link: 3.0x8109(100M): 0x0 [ 396.490093] mv2112_update_link: link 0x0 [ 396.490178] mv2112_read_status: autoneg is disabled [ 397.187508] init: starting service 'qvrd_vndr'... [ 397.199757] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 397.207543] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 397.262493] init: starting service 'sxrd'... [ 397.283130] init: Service 'qvrd_vndr' (pid 4050) exited with status 1 [ 397.283168] init: Sending signal 9 to service 'qvrd_vndr' (pid 4050) process group... [ 397.283402] libprocessgroup: Successfully killed process cgroup uid 1000 pid 4050 in 0ms [ 397.335271] init: Service 'sxrd' (pid 4051) exited with status 1 [ 397.335296] init: Sending signal 9 to service 'sxrd' (pid 4051) process group... [ 397.335530] libprocessgroup: Successfully killed process cgroup uid 1000 pid 4051 in 0ms [ 397.512659] mv2112_read_status [ 397.513012] mv2112_update_link: 3.0x901(1G): 0x80 [ 397.513333] mv2112_update_link: 3.0x8109(100M): 0x0 [ 397.513377] mv2112_update_link: link 0x0 [ 397.513420] mv2112_read_status: autoneg is disabled [ 398.124511] i2c_geni 980000.i2c: i2c error :-107 [ 398.129857] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 398.141088] i2c_geni 980000.i2c: i2c error :-107 [ 398.146165] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 398.537297] mv2112_read_status [ 398.537621] mv2112_update_link: 3.0x901(1G): 0x80 [ 398.537940] mv2112_update_link: 3.0x8109(100M): 0x0 [ 398.537983] mv2112_update_link: link 0x0 [ 398.538025] mv2112_read_status: autoneg is disabled [ 399.560940] mv2112_read_status [ 399.561227] mv2112_update_link: 3.0x901(1G): 0x80 [ 399.561838] mv2112_update_link: 3.0x8109(100M): 0x0 [ 399.561865] mv2112_update_link: link 0x0 [ 399.561892] mv2112_read_status: autoneg is disabled [ 400.170048] i2c_geni 980000.i2c: i2c error :-107 [ 400.175013] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 400.186332] i2c_geni 980000.i2c: i2c error :-107 [ 400.191456] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 400.584533] mv2112_read_status [ 400.585202] mv2112_update_link: 3.0x901(1G): 0x80 [ 400.585475] mv2112_update_link: 3.0x8109(100M): 0x0 [ 400.585501] mv2112_update_link: link 0x0 [ 400.585528] mv2112_read_status: autoneg is disabled [ 401.608714] mv2112_read_status [ 401.608997] mv2112_update_link: 3.0x901(1G): 0x80 [ 401.609249] mv2112_update_link: 3.0x8109(100M): 0x0 [ 401.609274] mv2112_update_link: link 0x0 [ 401.609298] mv2112_read_status: autoneg is disabled [ 402.220066] i2c_geni 980000.i2c: i2c error :-107 [ 402.225625] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 402.236464] i2c_geni 980000.i2c: i2c error :-107 [ 402.241521] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 402.248237] init: starting service 'qvrd_vndr'... [ 402.254667] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 402.257324] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 402.283429] init: starting service 'sxrd'... [ 402.340973] init: Service 'sxrd' (pid 4056) exited with status 1 [ 402.341025] init: Sending signal 9 to service 'sxrd' (pid 4056) process group... [ 402.341351] libprocessgroup: Successfully killed process cgroup uid 1000 pid 4056 in 0ms [ 402.345602] init: Service 'qvrd_vndr' (pid 4055) exited with status 1 [ 402.345634] init: Sending signal 9 to service 'qvrd_vndr' (pid 4055) process group... [ 402.345840] libprocessgroup: Successfully killed process cgroup uid 1000 pid 4055 in 0ms [ 402.635058] mv2112_read_status [ 402.635348] mv2112_update_link: 3.0x901(1G): 0x80 [ 402.635607] mv2112_update_link: 3.0x8109(100M): 0x0 [ 402.635633] mv2112_update_link: link 0x0 [ 402.635659] mv2112_read_status: autoneg is disabled [ 403.656580] mv2112_read_status [ 403.656860] mv2112_update_link: 3.0x901(1G): 0x80 [ 403.657271] mv2112_update_link: 3.0x8109(100M): 0x0 [ 403.657299] mv2112_update_link: link 0x0 [ 403.657323] mv2112_read_status: autoneg is disabled [ 404.267610] i2c_geni 980000.i2c: i2c error :-107 [ 404.274084] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 404.286571] i2c_geni 980000.i2c: i2c error :-107 [ 404.291667] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 404.680566] mv2112_read_status [ 404.680840] mv2112_update_link: 3.0x901(1G): 0x80 [ 404.681087] mv2112_update_link: 3.0x8109(100M): 0x0 [ 404.681110] mv2112_update_link: link 0x0 [ 404.681133] mv2112_read_status: autoneg is disabled [ 405.704677] mv2112_read_status [ 405.705036] mv2112_update_link: 3.0x901(1G): 0x80 [ 405.705346] mv2112_update_link: 3.0x8109(100M): 0x0 [ 405.705390] mv2112_update_link: link 0x0 [ 405.705433] mv2112_read_status: autoneg is disabled [ 406.316139] i2c_geni 980000.i2c: i2c error :-107 [ 406.321679] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 406.334637] i2c_geni 980000.i2c: i2c error :-107 [ 406.339596] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 406.728890] mv2112_read_status [ 406.729161] mv2112_update_link: 3.0x901(1G): 0x80 [ 406.729417] mv2112_update_link: 3.0x8109(100M): 0x0 [ 406.729442] mv2112_update_link: link 0x0 [ 406.729465] mv2112_read_status: autoneg is disabled [ 407.280101] init: starting service 'qvrd_vndr'... [ 407.288136] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 407.295373] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 407.356499] init: starting service 'sxrd'... [ 407.385256] init: Service 'qvrd_vndr' (pid 4058) exited with status 1 [ 407.385283] init: Sending signal 9 to service 'qvrd_vndr' (pid 4058) process group... [ 407.385483] libprocessgroup: Successfully killed process cgroup uid 1000 pid 4058 in 0ms [ 407.431877] init: Service 'sxrd' (pid 4059) exited with status 1 [ 407.431901] init: Sending signal 9 to service 'sxrd' (pid 4059) process group... [ 407.432096] libprocessgroup: Successfully killed process cgroup uid 1000 pid 4059 in 0ms [ 407.752683] mv2112_read_status [ 407.753032] mv2112_update_link: 3.0x901(1G): 0x80 [ 407.753342] mv2112_update_link: 3.0x8109(100M): 0x0 [ 407.753385] mv2112_update_link: link 0x0 [ 407.753430] mv2112_read_status: autoneg is disabled [ 408.362563] i2c_geni 980000.i2c: i2c error :-107 [ 408.368149] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 408.379889] i2c_geni 980000.i2c: i2c error :-107 [ 408.384799] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 408.777515] mv2112_read_status [ 408.778294] mv2112_update_link: 3.0x901(1G): 0x80 [ 408.778604] mv2112_update_link: 3.0x8109(100M): 0x0 [ 408.778648] mv2112_update_link: link 0x0 [ 408.778692] mv2112_read_status: autoneg is disabled [ 409.801021] mv2112_read_status [ 409.801660] mv2112_update_link: 3.0x901(1G): 0x80 [ 409.802143] mv2112_update_link: 3.0x8109(100M): 0x0 [ 409.802187] mv2112_update_link: link 0x0 [ 409.802229] mv2112_read_status: autoneg is disabled [ 410.412939] i2c_geni 980000.i2c: i2c error :-107 [ 410.419322] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 410.430937] i2c_geni 980000.i2c: i2c error :-107 [ 410.436035] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 410.824847] mv2112_read_status [ 410.825167] mv2112_update_link: 3.0x901(1G): 0x80 [ 410.825514] mv2112_update_link: 3.0x8109(100M): 0x0 [ 410.825557] mv2112_update_link: link 0x0 [ 410.825599] mv2112_read_status: autoneg is disabled [ 411.848641] mv2112_read_status [ 411.849161] mv2112_update_link: 3.0x901(1G): 0x80 [ 411.849611] mv2112_update_link: 3.0x8109(100M): 0x0 [ 411.849655] mv2112_update_link: link 0x0 [ 411.849698] mv2112_read_status: autoneg is disabled [ 412.342743] init: starting service 'qvrd_vndr'... [ 412.350516] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 412.357947] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 412.419048] init: starting service 'sxrd'... [ 412.442308] init: Service 'qvrd_vndr' (pid 4061) exited with status 1 [ 412.442338] init: Sending signal 9 to service 'qvrd_vndr' (pid 4061) process group... [ 412.442536] libprocessgroup: Successfully killed process cgroup uid 1000 pid 4061 in 0ms [ 412.457714] i2c_geni 980000.i2c: i2c error :-107 [ 412.463526] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 412.474856] i2c_geni 980000.i2c: i2c error :-107 [ 412.479804] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 412.481835] init: Service 'sxrd' (pid 4062) exited with status 1 [ 412.489441] init: Sending signal 9 to service 'sxrd' (pid 4062) process group... [ 412.489714] libprocessgroup: Successfully killed process cgroup uid 1000 pid 4062 in 0ms [ 412.872915] mv2112_read_status [ 412.873273] mv2112_update_link: 3.0x901(1G): 0x80 [ 412.873582] mv2112_update_link: 3.0x8109(100M): 0x0 [ 412.873626] mv2112_update_link: link 0x0 [ 412.873668] mv2112_read_status: autoneg is disabled [ 413.896647] mv2112_read_status [ 413.896968] mv2112_update_link: 3.0x901(1G): 0x80 [ 413.897276] mv2112_update_link: 3.0x8109(100M): 0x0 [ 413.897319] mv2112_update_link: link 0x0 [ 413.897361] mv2112_read_status: autoneg is disabled [ 414.507692] i2c_geni 980000.i2c: i2c error :-107 [ 414.512863] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 414.523835] i2c_geni 980000.i2c: i2c error :-107 [ 414.528800] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 414.920662] mv2112_read_status [ 414.921008] mv2112_update_link: 3.0x901(1G): 0x80 [ 414.921319] mv2112_update_link: 3.0x8109(100M): 0x0 [ 414.921362] mv2112_update_link: link 0x0 [ 414.921405] mv2112_read_status: autoneg is disabled [ 415.944767] mv2112_read_status [ 415.945089] mv2112_update_link: 3.0x901(1G): 0x80 [ 415.945838] mv2112_update_link: 3.0x8109(100M): 0x0 [ 415.945882] mv2112_update_link: link 0x0 [ 415.945934] mv2112_read_status: autoneg is disabled [ 416.555410] i2c_geni 980000.i2c: i2c error :-107 [ 416.560869] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 416.572111] i2c_geni 980000.i2c: i2c error :-107 [ 416.580009] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 416.968776] mv2112_read_status [ 416.969043] mv2112_update_link: 3.0x901(1G): 0x80 [ 416.969286] mv2112_update_link: 3.0x8109(100M): 0x0 [ 416.969304] mv2112_update_link: link 0x0 [ 416.969323] mv2112_read_status: autoneg is disabled [ 417.405520] init: starting service 'qvrd_vndr'... [ 417.415938] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 417.420576] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 417.474432] init: starting service 'sxrd'... [ 417.500907] init: Service 'qvrd_vndr' (pid 4064) exited with status 1 [ 417.500941] init: Sending signal 9 to service 'qvrd_vndr' (pid 4064) process group... [ 417.501162] libprocessgroup: Successfully killed process cgroup uid 1000 pid 4064 in 0ms [ 417.550054] init: Service 'sxrd' (pid 4065) exited with status 1 [ 417.550132] init: Sending signal 9 to service 'sxrd' (pid 4065) process group... [ 417.550928] libprocessgroup: Successfully killed process cgroup uid 1000 pid 4065 in 0ms [ 417.992915] mv2112_read_status [ 417.993285] mv2112_update_link: 3.0x901(1G): 0x80 [ 417.993595] mv2112_update_link: 3.0x8109(100M): 0x0 [ 417.993639] mv2112_update_link: link 0x0 [ 417.993683] mv2112_read_status: autoneg is disabled [ 418.604111] i2c_geni 980000.i2c: i2c error :-107 [ 418.609220] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 418.621091] i2c_geni 980000.i2c: i2c error :-107 [ 418.626040] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 419.016878] mv2112_read_status [ 419.017199] mv2112_update_link: 3.0x901(1G): 0x80 [ 419.017507] mv2112_update_link: 3.0x8109(100M): 0x0 [ 419.017551] mv2112_update_link: link 0x0 [ 419.017593] mv2112_read_status: autoneg is disabled [ 420.040502] mv2112_read_status [ 420.040766] mv2112_update_link: 3.0x901(1G): 0x80 [ 420.041022] mv2112_update_link: 3.0x8109(100M): 0x0 [ 420.041047] mv2112_update_link: link 0x0 [ 420.041070] mv2112_read_status: autoneg is disabled [ 420.652531] i2c_geni 980000.i2c: i2c error :-107 [ 420.658166] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 420.671860] i2c_geni 980000.i2c: i2c error :-107 [ 420.677066] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 421.066345] mv2112_read_status [ 421.066691] mv2112_update_link: 3.0x901(1G): 0x80 [ 421.067039] mv2112_update_link: 3.0x8109(100M): 0x0 [ 421.067082] mv2112_update_link: link 0x0 [ 421.067124] mv2112_read_status: autoneg is disabled [ 422.089172] mv2112_read_status [ 422.090003] mv2112_update_link: 3.0x901(1G): 0x80 [ 422.090318] mv2112_update_link: 3.0x8109(100M): 0x0 [ 422.090362] mv2112_update_link: link 0x0 [ 422.090405] mv2112_read_status: autoneg is disabled [ 422.462456] init: starting service 'qvrd_vndr'... [ 422.469959] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 422.481870] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 422.540170] init: starting service 'sxrd'... [ 422.562689] init: Service 'qvrd_vndr' (pid 4067) exited with status 1 [ 422.562722] init: Sending signal 9 to service 'qvrd_vndr' (pid 4067) process group... [ 422.562920] libprocessgroup: Successfully killed process cgroup uid 1000 pid 4067 in 0ms [ 422.599491] init: Service 'sxrd' (pid 4068) exited with status 1 [ 422.599536] init: Sending signal 9 to service 'sxrd' (pid 4068) process group... [ 422.599872] libprocessgroup: Successfully killed process cgroup uid 1000 pid 4068 in 0ms [ 422.699938] i2c_geni 980000.i2c: i2c error :-107 [ 422.705248] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 422.717362] i2c_geni 980000.i2c: i2c error :-107 [ 422.722561] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 423.112687] mv2112_read_status [ 423.113035] mv2112_update_link: 3.0x901(1G): 0x80 [ 423.113345] mv2112_update_link: 3.0x8109(100M): 0x0 [ 423.113389] mv2112_update_link: link 0x0 [ 423.113432] mv2112_read_status: autoneg is disabled [ 424.136665] mv2112_read_status [ 424.137006] mv2112_update_link: 3.0x901(1G): 0x80 [ 424.137326] mv2112_update_link: 3.0x8109(100M): 0x0 [ 424.137370] mv2112_update_link: link 0x0 [ 424.137414] mv2112_read_status: autoneg is disabled [ 424.749257] i2c_geni 980000.i2c: i2c error :-107 [ 424.754700] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 424.766360] i2c_geni 980000.i2c: i2c error :-107 [ 424.771265] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 425.160806] mv2112_read_status [ 425.161124] mv2112_update_link: 3.0x901(1G): 0x80 [ 425.161433] mv2112_update_link: 3.0x8109(100M): 0x0 [ 425.161476] mv2112_update_link: link 0x0 [ 425.161518] mv2112_read_status: autoneg is disabled [ 426.184615] mv2112_read_status [ 426.184943] mv2112_update_link: 3.0x901(1G): 0x80 [ 426.185250] mv2112_update_link: 3.0x8109(100M): 0x0 [ 426.185293] mv2112_update_link: link 0x0 [ 426.185334] mv2112_read_status: autoneg is disabled [ 426.796525] i2c_geni 980000.i2c: i2c error :-107 [ 426.802293] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 426.812505] i2c_geni 980000.i2c: i2c error :-107 [ 426.817365] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 427.209096] mv2112_read_status [ 427.209465] mv2112_update_link: 3.0x901(1G): 0x80 [ 427.209776] mv2112_update_link: 3.0x8109(100M): 0x0 [ 427.209821] mv2112_update_link: link 0x0 [ 427.209863] mv2112_read_status: autoneg is disabled [ 427.525900] init: starting service 'qvrd_vndr'... [ 427.531750] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 427.535456] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 427.585685] init: starting service 'sxrd'... [ 427.604899] init: Service 'qvrd_vndr' (pid 4070) exited with status 1 [ 427.604927] init: Sending signal 9 to service 'qvrd_vndr' (pid 4070) process group... [ 427.605171] libprocessgroup: Successfully killed process cgroup uid 1000 pid 4070 in 0ms [ 427.660374] init: Service 'sxrd' (pid 4071) exited with status 1 [ 427.660411] init: Sending signal 9 to service 'sxrd' (pid 4071) process group... [ 427.660734] libprocessgroup: Successfully killed process cgroup uid 1000 pid 4071 in 0ms [ 428.232687] mv2112_read_status [ 428.233040] mv2112_update_link: 3.0x901(1G): 0x80 [ 428.233351] mv2112_update_link: 3.0x8109(100M): 0x0 [ 428.233394] mv2112_update_link: link 0x0 [ 428.233438] mv2112_read_status: autoneg is disabled [ 428.845459] i2c_geni 980000.i2c: i2c error :-107 [ 428.850560] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 428.862323] i2c_geni 980000.i2c: i2c error :-107 [ 428.867270] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 429.256862] mv2112_read_status [ 429.257199] mv2112_update_link: 3.0x901(1G): 0x80 [ 429.257507] mv2112_update_link: 3.0x8109(100M): 0x0 [ 429.257551] mv2112_update_link: link 0x0 [ 429.257593] mv2112_read_status: autoneg is disabled [ 430.280852] mv2112_read_status [ 430.281183] mv2112_update_link: 3.0x901(1G): 0x80 [ 430.281469] mv2112_update_link: 3.0x8109(100M): 0x0 [ 430.281506] mv2112_update_link: link 0x0 [ 430.281543] mv2112_read_status: autoneg is disabled [ 430.892137] i2c_geni 980000.i2c: i2c error :-107 [ 430.897453] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 430.909349] i2c_geni 980000.i2c: i2c error :-107 [ 430.914297] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 431.304501] mv2112_read_status [ 431.304784] mv2112_update_link: 3.0x901(1G): 0x80 [ 431.305057] mv2112_update_link: 3.0x8109(100M): 0x0 [ 431.305085] mv2112_update_link: link 0x0 [ 431.305113] mv2112_read_status: autoneg is disabled [ 432.329012] mv2112_read_status [ 432.329370] mv2112_update_link: 3.0x901(1G): 0x80 [ 432.329689] mv2112_update_link: 3.0x8109(100M): 0x0 [ 432.329732] mv2112_update_link: link 0x0 [ 432.329775] mv2112_read_status: autoneg is disabled [ 432.572682] init: starting service 'qvrd_vndr'... [ 432.578979] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 432.582472] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 432.637930] init: starting service 'sxrd'... [ 432.663165] init: Service 'qvrd_vndr' (pid 4073) exited with status 1 [ 432.663193] init: Sending signal 9 to service 'qvrd_vndr' (pid 4073) process group... [ 432.663397] libprocessgroup: Successfully killed process cgroup uid 1000 pid 4073 in 0ms [ 432.732337] init: Service 'sxrd' (pid 4074) exited with status 1 [ 432.732363] init: Sending signal 9 to service 'sxrd' (pid 4074) process group... [ 432.732664] libprocessgroup: Successfully killed process cgroup uid 1000 pid 4074 in 0ms [ 432.939345] i2c_geni 980000.i2c: i2c error :-107 [ 432.944816] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 432.955969] i2c_geni 980000.i2c: i2c error :-107 [ 432.961565] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 433.352862] mv2112_read_status [ 433.353218] mv2112_update_link: 3.0x901(1G): 0x80 [ 433.353529] mv2112_update_link: 3.0x8109(100M): 0x0 [ 433.353573] mv2112_update_link: link 0x0 [ 433.353617] mv2112_read_status: autoneg is disabled [ 434.376722] mv2112_read_status [ 434.377079] mv2112_update_link: 3.0x901(1G): 0x80 [ 434.377425] mv2112_update_link: 3.0x8109(100M): 0x0 [ 434.377468] mv2112_update_link: link 0x0 [ 434.377510] mv2112_read_status: autoneg is disabled [ 434.987941] i2c_geni 980000.i2c: i2c error :-107 [ 434.993241] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 435.004495] i2c_geni 980000.i2c: i2c error :-107 [ 435.009590] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 435.400562] mv2112_read_status [ 435.400844] mv2112_update_link: 3.0x901(1G): 0x80 [ 435.401119] mv2112_update_link: 3.0x8109(100M): 0x0 [ 435.401147] mv2112_update_link: link 0x0 [ 435.401175] mv2112_read_status: autoneg is disabled [ 436.424823] mv2112_read_status [ 436.425188] mv2112_update_link: 3.0x901(1G): 0x80 [ 436.425499] mv2112_update_link: 3.0x8109(100M): 0x0 [ 436.425542] mv2112_update_link: link 0x0 [ 436.425585] mv2112_read_status: autoneg is disabled [ 437.035864] i2c_geni 980000.i2c: i2c error :-107 [ 437.041011] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 437.052522] i2c_geni 980000.i2c: i2c error :-107 [ 437.057403] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 437.449171] mv2112_read_status [ 437.449542] mv2112_update_link: 3.0x901(1G): 0x80 [ 437.449851] mv2112_update_link: 3.0x8109(100M): 0x0 [ 437.449895] mv2112_update_link: link 0x0 [ 437.449937] mv2112_read_status: autoneg is disabled [ 437.625059] init: starting service 'qvrd_vndr'... [ 437.633345] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 437.640254] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 437.699874] init: starting service 'sxrd'... [ 437.723298] init: Service 'qvrd_vndr' (pid 4076) exited with status 1 [ 437.723337] init: Sending signal 9 to service 'qvrd_vndr' (pid 4076) process group... [ 437.723590] libprocessgroup: Successfully killed process cgroup uid 1000 pid 4076 in 0ms [ 437.775631] init: Service 'sxrd' (pid 4077) exited with status 1 [ 437.775821] init: Sending signal 9 to service 'sxrd' (pid 4077) process group... [ 437.778006] libprocessgroup: Successfully killed process cgroup uid 1000 pid 4077 in 1ms [ 438.472877] mv2112_read_status [ 438.473287] mv2112_update_link: 3.0x901(1G): 0x80 [ 438.473597] mv2112_update_link: 3.0x8109(100M): 0x0 [ 438.473641] mv2112_update_link: link 0x0 [ 438.473684] mv2112_read_status: autoneg is disabled [ 439.083213] i2c_geni 980000.i2c: i2c error :-107 [ 439.089238] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 439.099915] i2c_geni 980000.i2c: i2c error :-107 [ 439.104794] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 439.496647] mv2112_read_status [ 439.496944] mv2112_update_link: 3.0x901(1G): 0x80 [ 439.497222] mv2112_update_link: 3.0x8109(100M): 0x0 [ 439.497260] mv2112_update_link: link 0x0 [ 439.497299] mv2112_read_status: autoneg is disabled [ 440.520645] mv2112_read_status [ 440.521002] mv2112_update_link: 3.0x901(1G): 0x80 [ 440.521312] mv2112_update_link: 3.0x8109(100M): 0x0 [ 440.521355] mv2112_update_link: link 0x0 [ 440.521399] mv2112_read_status: autoneg is disabled [ 441.132591] i2c_geni 980000.i2c: i2c error :-107 [ 441.137903] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 441.149280] i2c_geni 980000.i2c: i2c error :-107 [ 441.154601] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 441.544749] mv2112_read_status [ 441.545067] mv2112_update_link: 3.0x901(1G): 0x80 [ 441.545817] mv2112_update_link: 3.0x8109(100M): 0x0 [ 441.545862] mv2112_update_link: link 0x0 [ 441.545919] mv2112_read_status: autoneg is disabled [ 442.569047] mv2112_read_status [ 442.569406] mv2112_update_link: 3.0x901(1G): 0x80 [ 442.569717] mv2112_update_link: 3.0x8109(100M): 0x0 [ 442.569760] mv2112_update_link: link 0x0 [ 442.569804] mv2112_read_status: autoneg is disabled [ 442.684759] init: starting service 'qvrd_vndr'... [ 442.693490] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 442.705300] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 442.766616] init: starting service 'sxrd'... [ 442.798423] init: Service 'qvrd_vndr' (pid 4081) exited with status 1 [ 442.798452] init: Sending signal 9 to service 'qvrd_vndr' (pid 4081) process group... [ 442.798657] libprocessgroup: Successfully killed process cgroup uid 1000 pid 4081 in 0ms [ 442.836531] init: Service 'sxrd' (pid 4082) exited with status 1 [ 442.836566] init: Sending signal 9 to service 'sxrd' (pid 4082) process group... [ 442.836847] libprocessgroup: Successfully killed process cgroup uid 1000 pid 4082 in 0ms [ 443.179732] i2c_geni 980000.i2c: i2c error :-107 [ 443.185322] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 443.197302] i2c_geni 980000.i2c: i2c error :-107 [ 443.202328] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 443.593648] mv2112_read_status [ 443.594434] mv2112_update_link: 3.0x901(1G): 0x80 [ 443.594744] mv2112_update_link: 3.0x8109(100M): 0x0 [ 443.594788] mv2112_update_link: link 0x0 [ 443.594831] mv2112_read_status: autoneg is disabled [ 444.616599] mv2112_read_status [ 444.616852] mv2112_update_link: 3.0x901(1G): 0x80 [ 444.617094] mv2112_update_link: 3.0x8109(100M): 0x0 [ 444.617111] mv2112_update_link: link 0x0 [ 444.617128] mv2112_read_status: autoneg is disabled [ 445.228078] i2c_geni 980000.i2c: i2c error :-107 [ 445.233987] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 445.245579] i2c_geni 980000.i2c: i2c error :-107 [ 445.250585] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 445.640862] mv2112_read_status [ 445.641217] mv2112_update_link: 3.0x901(1G): 0x80 [ 445.641528] mv2112_update_link: 3.0x8109(100M): 0x0 [ 445.641571] mv2112_update_link: link 0x0 [ 445.641614] mv2112_read_status: autoneg is disabled [ 446.664677] mv2112_read_status [ 446.665006] mv2112_update_link: 3.0x901(1G): 0x80 [ 446.665324] mv2112_update_link: 3.0x8109(100M): 0x0 [ 446.665368] mv2112_update_link: link 0x0 [ 446.665409] mv2112_read_status: autoneg is disabled [ 447.273718] i2c_geni 980000.i2c: i2c error :-107 [ 447.278985] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 447.289554] i2c_geni 980000.i2c: i2c error :-107 [ 447.294518] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 447.689121] mv2112_read_status [ 447.689461] mv2112_update_link: 3.0x901(1G): 0x80 [ 447.689767] mv2112_update_link: 3.0x8109(100M): 0x0 [ 447.689811] mv2112_update_link: link 0x0 [ 447.689854] mv2112_read_status: autoneg is disabled [ 447.745570] init: starting service 'qvrd_vndr'... [ 447.749743] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 447.753378] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 447.805800] init: starting service 'sxrd'... [ 447.824350] init: Service 'qvrd_vndr' (pid 4084) exited with status 1 [ 447.824378] init: Sending signal 9 to service 'qvrd_vndr' (pid 4084) process group... [ 447.824572] libprocessgroup: Successfully killed process cgroup uid 1000 pid 4084 in 0ms [ 447.872799] init: Service 'sxrd' (pid 4085) exited with status 1 [ 447.872826] init: Sending signal 9 to service 'sxrd' (pid 4085) process group... [ 447.873020] libprocessgroup: Successfully killed process cgroup uid 1000 pid 4085 in 0ms [ 448.712795] mv2112_read_status [ 448.713148] mv2112_update_link: 3.0x901(1G): 0x80 [ 448.713486] mv2112_update_link: 3.0x8109(100M): 0x0 [ 448.713529] mv2112_update_link: link 0x0 [ 448.713572] mv2112_read_status: autoneg is disabled [ 449.324609] i2c_geni 980000.i2c: i2c error :-107 [ 449.329904] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 449.342099] i2c_geni 980000.i2c: i2c error :-107 [ 449.347029] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 449.736786] mv2112_read_status [ 449.737103] mv2112_update_link: 3.0x901(1G): 0x80 [ 449.737408] mv2112_update_link: 3.0x8109(100M): 0x0 [ 449.737451] mv2112_update_link: link 0x0 [ 449.737493] mv2112_read_status: autoneg is disabled [ 450.760608] mv2112_read_status [ 450.760933] mv2112_update_link: 3.0x901(1G): 0x80 [ 450.761239] mv2112_update_link: 3.0x8109(100M): 0x0 [ 450.761282] mv2112_update_link: link 0x0 [ 450.761324] mv2112_read_status: autoneg is disabled [ 451.371918] i2c_geni 980000.i2c: i2c error :-107 [ 451.377087] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 451.388918] i2c_geni 980000.i2c: i2c error :-107 [ 451.393975] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 451.784810] mv2112_read_status [ 451.785157] mv2112_update_link: 3.0x901(1G): 0x80 [ 451.785483] mv2112_update_link: 3.0x8109(100M): 0x0 [ 451.785527] mv2112_update_link: link 0x0 [ 451.785569] mv2112_read_status: autoneg is disabled [ 452.793439] init: starting service 'qvrd_vndr'... [ 452.801693] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 452.808861] mv2112_read_status [ 452.809131] mv2112_update_link: 3.0x901(1G): 0x80 [ 452.809386] mv2112_update_link: 3.0x8109(100M): 0x0 [ 452.809411] mv2112_update_link: link 0x0 [ 452.809437] mv2112_read_status: autoneg is disabled [ 452.810494] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 452.864208] init: starting service 'sxrd'... [ 452.892307] init: Service 'qvrd_vndr' (pid 4087) exited with status 1 [ 452.892340] init: Sending signal 9 to service 'qvrd_vndr' (pid 4087) process group... [ 452.892554] libprocessgroup: Successfully killed process cgroup uid 1000 pid 4087 in 0ms [ 452.939548] init: Service 'sxrd' (pid 4088) exited with status 1 [ 452.939741] init: Sending signal 9 to service 'sxrd' (pid 4088) process group... [ 452.941373] libprocessgroup: Successfully killed process cgroup uid 1000 pid 4088 in 1ms [ 453.418828] i2c_geni 980000.i2c: i2c error :-107 [ 453.423902] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 453.434795] i2c_geni 980000.i2c: i2c error :-107 [ 453.440250] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 453.832806] mv2112_read_status [ 453.833146] mv2112_update_link: 3.0x901(1G): 0x80 [ 453.833453] mv2112_update_link: 3.0x8109(100M): 0x0 [ 453.833497] mv2112_update_link: link 0x0 [ 453.833539] mv2112_read_status: autoneg is disabled [ 454.856837] mv2112_read_status [ 454.857186] mv2112_update_link: 3.0x901(1G): 0x80 [ 454.857525] mv2112_update_link: 3.0x8109(100M): 0x0 [ 454.857568] mv2112_update_link: link 0x0 [ 454.857612] mv2112_read_status: autoneg is disabled [ 455.466853] i2c_geni 980000.i2c: i2c error :-107 [ 455.473578] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 455.485266] i2c_geni 980000.i2c: i2c error :-107 [ 455.490168] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 455.880968] mv2112_read_status [ 455.881311] mv2112_update_link: 3.0x901(1G): 0x80 [ 455.881631] mv2112_update_link: 3.0x8109(100M): 0x0 [ 455.881674] mv2112_update_link: link 0x0 [ 455.881717] mv2112_read_status: autoneg is disabled [ 456.904549] mv2112_read_status [ 456.904854] mv2112_update_link: 3.0x901(1G): 0x80 [ 456.905137] mv2112_update_link: 3.0x8109(100M): 0x0 [ 456.905168] mv2112_update_link: link 0x0 [ 456.905199] mv2112_read_status: autoneg is disabled [ 457.524806] i2c_geni 980000.i2c: i2c error :-107 [ 457.530183] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 457.541708] i2c_geni 980000.i2c: i2c error :-107 [ 457.546883] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 457.852592] init: starting service 'qvrd_vndr'... [ 457.860995] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 457.867685] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 457.920441] init: starting service 'sxrd'... [ 457.928510] mv2112_read_status [ 457.928762] mv2112_update_link: 3.0x901(1G): 0x80 [ 457.929104] mv2112_update_link: 3.0x8109(100M): 0x0 [ 457.929148] mv2112_update_link: link 0x0 [ 457.929191] mv2112_read_status: autoneg is disabled [ 457.943723] init: Service 'qvrd_vndr' (pid 4090) exited with status 1 [ 457.943750] init: Sending signal 9 to service 'qvrd_vndr' (pid 4090) process group... [ 457.943948] libprocessgroup: Successfully killed process cgroup uid 1000 pid 4090 in 0ms [ 457.993474] init: Service 'sxrd' (pid 4091) exited with status 1 [ 457.993499] init: Sending signal 9 to service 'sxrd' (pid 4091) process group... [ 457.993722] libprocessgroup: Successfully killed process cgroup uid 1000 pid 4091 in 0ms [ 458.952466] mv2112_read_status [ 458.953336] mv2112_update_link: 3.0x901(1G): 0x80 [ 458.953572] mv2112_update_link: 3.0x8109(100M): 0x0 [ 458.953596] mv2112_update_link: link 0x0 [ 458.953614] mv2112_read_status: autoneg is disabled [ 459.564068] i2c_geni 980000.i2c: i2c error :-107 [ 459.569210] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 459.580055] i2c_geni 980000.i2c: i2c error :-107 [ 459.585426] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 459.977457] mv2112_read_status [ 459.977724] mv2112_update_link: 3.0x901(1G): 0x80 [ 459.977971] mv2112_update_link: 3.0x8109(100M): 0x0 [ 459.977990] mv2112_update_link: link 0x0 [ 459.978009] mv2112_read_status: autoneg is disabled [ 461.000557] mv2112_read_status [ 461.000832] mv2112_update_link: 3.0x901(1G): 0x80 [ 461.001080] mv2112_update_link: 3.0x8109(100M): 0x0 [ 461.001102] mv2112_update_link: link 0x0 [ 461.001125] mv2112_read_status: autoneg is disabled [ 461.611069] i2c_geni 980000.i2c: i2c error :-107 [ 461.617370] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 461.630014] i2c_geni 980000.i2c: i2c error :-107 [ 461.634889] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 462.025247] mv2112_read_status [ 462.025531] mv2112_update_link: 3.0x901(1G): 0x80 [ 462.025793] mv2112_update_link: 3.0x8109(100M): 0x0 [ 462.025815] mv2112_update_link: link 0x0 [ 462.025836] mv2112_read_status: autoneg is disabled [ 462.907470] init: starting service 'qvrd_vndr'... [ 462.912428] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 462.916799] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 462.965826] init: starting service 'sxrd'... [ 462.985819] init: Service 'qvrd_vndr' (pid 4093) exited with status 1 [ 462.985851] init: Sending signal 9 to service 'qvrd_vndr' (pid 4093) process group... [ 462.986075] libprocessgroup: Successfully killed process cgroup uid 1000 pid 4093 in 0ms [ 463.018144] init: Service 'sxrd' (pid 4094) exited with status 1 [ 463.018173] init: Sending signal 9 to service 'sxrd' (pid 4094) process group... [ 463.018405] libprocessgroup: Successfully killed process cgroup uid 1000 pid 4094 in 0ms [ 463.048725] mv2112_read_status [ 463.048984] mv2112_update_link: 3.0x901(1G): 0x80 [ 463.049224] mv2112_update_link: 3.0x8109(100M): 0x0 [ 463.049242] mv2112_update_link: link 0x0 [ 463.049261] mv2112_read_status: autoneg is disabled [ 463.662024] i2c_geni 980000.i2c: i2c error :-107 [ 463.667027] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 463.677615] i2c_geni 980000.i2c: i2c error :-107 [ 463.682514] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 464.072514] mv2112_read_status [ 464.072805] mv2112_update_link: 3.0x901(1G): 0x80 [ 464.073065] mv2112_update_link: 3.0x8109(100M): 0x0 [ 464.073091] mv2112_update_link: link 0x0 [ 464.073118] mv2112_read_status: autoneg is disabled [ 465.101484] mv2112_read_status [ 465.102148] mv2112_update_link: 3.0x901(1G): 0x80 [ 465.102540] mv2112_update_link: 3.0x8109(100M): 0x0 [ 465.102579] mv2112_update_link: link 0x0 [ 465.102618] mv2112_read_status: autoneg is disabled [ 465.706829] i2c_geni 980000.i2c: i2c error :-107 [ 465.712899] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 465.723978] i2c_geni 980000.i2c: i2c error :-107 [ 465.729175] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 466.120795] mv2112_read_status [ 466.121151] mv2112_update_link: 3.0x901(1G): 0x80 [ 466.121463] mv2112_update_link: 3.0x8109(100M): 0x0 [ 466.121507] mv2112_update_link: link 0x0 [ 466.121550] mv2112_read_status: autoneg is disabled [ 467.144660] mv2112_read_status [ 467.144991] mv2112_update_link: 3.0x901(1G): 0x80 [ 467.145299] mv2112_update_link: 3.0x8109(100M): 0x0 [ 467.145342] mv2112_update_link: link 0x0 [ 467.145384] mv2112_read_status: autoneg is disabled [ 467.755378] i2c_geni 980000.i2c: i2c error :-107 [ 467.760650] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 467.771800] i2c_geni 980000.i2c: i2c error :-107 [ 467.777235] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 467.952806] init: starting service 'qvrd_vndr'... [ 467.960909] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 467.967353] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 468.023990] init: starting service 'sxrd'... [ 468.059917] init: Service 'qvrd_vndr' (pid 4096) exited with status 1 [ 468.059947] init: Sending signal 9 to service 'qvrd_vndr' (pid 4096) process group... [ 468.060156] libprocessgroup: Successfully killed process cgroup uid 1000 pid 4096 in 0ms [ 468.102217] init: Service 'sxrd' (pid 4097) exited with status 1 [ 468.102300] init: Sending signal 9 to service 'sxrd' (pid 4097) process group... [ 468.103039] libprocessgroup: Successfully killed process cgroup uid 1000 pid 4097 in 0ms [ 468.169273] mv2112_read_status [ 468.169620] mv2112_update_link: 3.0x901(1G): 0x80 [ 468.169929] mv2112_update_link: 3.0x8109(100M): 0x0 [ 468.169973] mv2112_update_link: link 0x0 [ 468.170016] mv2112_read_status: autoneg is disabled [ 469.193206] mv2112_read_status [ 469.193548] mv2112_update_link: 3.0x901(1G): 0x80 [ 469.194341] mv2112_update_link: 3.0x8109(100M): 0x0 [ 469.194385] mv2112_update_link: link 0x0 [ 469.194428] mv2112_read_status: autoneg is disabled [ 469.807712] i2c_geni 980000.i2c: i2c error :-107 [ 469.813031] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 469.824121] i2c_geni 980000.i2c: i2c error :-107 [ 469.829173] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 470.216803] mv2112_read_status [ 470.217139] mv2112_update_link: 3.0x901(1G): 0x80 [ 470.217468] mv2112_update_link: 3.0x8109(100M): 0x0 [ 470.217511] mv2112_update_link: link 0x0 [ 470.217553] mv2112_read_status: autoneg is disabled [ 471.240805] mv2112_read_status [ 471.241134] mv2112_update_link: 3.0x901(1G): 0x80 [ 471.241441] mv2112_update_link: 3.0x8109(100M): 0x0 [ 471.241484] mv2112_update_link: link 0x0 [ 471.241526] mv2112_read_status: autoneg is disabled [ 471.852088] i2c_geni 980000.i2c: i2c error :-107 [ 471.857376] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 471.869076] i2c_geni 980000.i2c: i2c error :-107 [ 471.874028] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 472.265264] mv2112_read_status [ 472.265513] mv2112_update_link: 3.0x901(1G): 0x80 [ 472.266049] mv2112_update_link: 3.0x8109(100M): 0x0 [ 472.266067] mv2112_update_link: link 0x0 [ 472.266085] mv2112_read_status: autoneg is disabled [ 473.011597] init: starting service 'qvrd_vndr'... [ 473.019539] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 473.029944] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 473.084222] init: starting service 'sxrd'... [ 473.102906] init: Service 'qvrd_vndr' (pid 4099) exited with status 1 [ 473.102940] init: Sending signal 9 to service 'qvrd_vndr' (pid 4099) process group... [ 473.103156] libprocessgroup: Successfully killed process cgroup uid 1000 pid 4099 in 0ms [ 473.157282] init: Service 'sxrd' (pid 4100) exited with status 1 [ 473.157316] init: Sending signal 9 to service 'sxrd' (pid 4100) process group... [ 473.157641] libprocessgroup: Successfully killed process cgroup uid 1000 pid 4100 in 0ms [ 473.289193] mv2112_read_status [ 473.289550] mv2112_update_link: 3.0x901(1G): 0x80 [ 473.289860] mv2112_update_link: 3.0x8109(100M): 0x0 [ 473.289904] mv2112_update_link: link 0x0 [ 473.289947] mv2112_read_status: autoneg is disabled [ 473.902595] i2c_geni 980000.i2c: i2c error :-107 [ 473.907974] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 473.923883] i2c_geni 980000.i2c: i2c error :-107 [ 473.929040] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 474.313235] mv2112_read_status [ 474.313567] mv2112_update_link: 3.0x901(1G): 0x80 [ 474.313876] mv2112_update_link: 3.0x8109(100M): 0x0 [ 474.313919] mv2112_update_link: link 0x0 [ 474.313961] mv2112_read_status: autoneg is disabled [ 475.336573] mv2112_read_status [ 475.336888] mv2112_update_link: 3.0x901(1G): 0x80 [ 475.337174] mv2112_update_link: 3.0x8109(100M): 0x0 [ 475.337205] mv2112_update_link: link 0x0 [ 475.337236] mv2112_read_status: autoneg is disabled [ 475.949012] i2c_geni 980000.i2c: i2c error :-107 [ 475.954552] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 475.966280] i2c_geni 980000.i2c: i2c error :-107 [ 475.971214] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 476.360609] mv2112_read_status [ 476.360923] mv2112_update_link: 3.0x901(1G): 0x80 [ 476.361694] mv2112_update_link: 3.0x8109(100M): 0x0 [ 476.361738] mv2112_update_link: link 0x0 [ 476.361780] mv2112_read_status: autoneg is disabled [ 477.384647] mv2112_read_status [ 477.384966] mv2112_update_link: 3.0x901(1G): 0x80 [ 477.385274] mv2112_update_link: 3.0x8109(100M): 0x0 [ 477.385317] mv2112_update_link: link 0x0 [ 477.385359] mv2112_read_status: autoneg is disabled [ 477.995862] i2c_geni 980000.i2c: i2c error :-107 [ 478.001186] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 478.012965] i2c_geni 980000.i2c: i2c error :-107 [ 478.018243] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 478.072043] init: starting service 'qvrd_vndr'... [ 478.082030] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 478.089418] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 478.144011] init: starting service 'sxrd'... [ 478.163858] init: Service 'qvrd_vndr' (pid 4102) exited with status 1 [ 478.163886] init: Sending signal 9 to service 'qvrd_vndr' (pid 4102) process group... [ 478.164086] libprocessgroup: Successfully killed process cgroup uid 1000 pid 4102 in 0ms [ 478.213239] init: Service 'sxrd' (pid 4103) exited with status 1 [ 478.213426] init: Sending signal 9 to service 'sxrd' (pid 4103) process group... [ 478.215366] libprocessgroup: Successfully killed process cgroup uid 1000 pid 4103 in 1ms [ 478.409081] mv2112_read_status [ 478.409448] mv2112_update_link: 3.0x901(1G): 0x80 [ 478.409758] mv2112_update_link: 3.0x8109(100M): 0x0 [ 478.409802] mv2112_update_link: link 0x0 [ 478.409845] mv2112_read_status: autoneg is disabled [ 479.432973] mv2112_read_status [ 479.433297] mv2112_update_link: 3.0x901(1G): 0x80 [ 479.433605] mv2112_update_link: 3.0x8109(100M): 0x0 [ 479.433649] mv2112_update_link: link 0x0 [ 479.433691] mv2112_read_status: autoneg is disabled [ 480.045196] i2c_geni 980000.i2c: i2c error :-107 [ 480.051013] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 480.061246] i2c_geni 980000.i2c: i2c error :-107 [ 480.066177] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 480.456495] mv2112_read_status [ 480.456751] mv2112_update_link: 3.0x901(1G): 0x80 [ 480.456999] mv2112_update_link: 3.0x8109(100M): 0x0 [ 480.457021] mv2112_update_link: link 0x0 [ 480.457044] mv2112_read_status: autoneg is disabled [ 481.480797] mv2112_read_status [ 481.481152] mv2112_update_link: 3.0x901(1G): 0x80 [ 481.481824] mv2112_update_link: 3.0x8109(100M): 0x0 [ 481.481870] mv2112_update_link: link 0x0 [ 481.481914] mv2112_read_status: autoneg is disabled [ 482.092176] i2c_geni 980000.i2c: i2c error :-107 [ 482.097501] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 482.108510] i2c_geni 980000.i2c: i2c error :-107 [ 482.113461] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 482.504648] mv2112_read_status [ 482.504981] mv2112_update_link: 3.0x901(1G): 0x80 [ 482.505321] mv2112_update_link: 3.0x8109(100M): 0x0 [ 482.505364] mv2112_update_link: link 0x0 [ 482.505406] mv2112_read_status: autoneg is disabled [ 483.130246] init: starting service 'qvrd_vndr'... [ 483.138499] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 483.145671] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 483.203260] init: starting service 'sxrd'... [ 483.238245] init: Service 'qvrd_vndr' (pid 4105) exited with status 1 [ 483.238292] init: Sending signal 9 to service 'qvrd_vndr' (pid 4105) process group... [ 483.238540] libprocessgroup: Successfully killed process cgroup uid 1000 pid 4105 in 0ms [ 483.283258] init: Service 'sxrd' (pid 4106) exited with status 1 [ 483.283353] init: Sending signal 9 to service 'sxrd' (pid 4106) process group... [ 483.284090] libprocessgroup: Successfully killed process cgroup uid 1000 pid 4106 in 0ms [ 483.529308] mv2112_read_status [ 483.529666] mv2112_update_link: 3.0x901(1G): 0x80 [ 483.529977] mv2112_update_link: 3.0x8109(100M): 0x0 [ 483.530022] mv2112_update_link: link 0x0 [ 483.530065] mv2112_read_status: autoneg is disabled [ 484.141072] i2c_geni 980000.i2c: i2c error :-107 [ 484.146758] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 484.159340] i2c_geni 980000.i2c: i2c error :-107 [ 484.164813] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 484.553158] mv2112_read_status [ 484.553715] mv2112_update_link: 3.0x901(1G): 0x80 [ 484.554180] mv2112_update_link: 3.0x8109(100M): 0x0 [ 484.554231] mv2112_update_link: link 0x0 [ 484.554274] mv2112_read_status: autoneg is disabled [ 485.576624] mv2112_read_status [ 485.576952] mv2112_update_link: 3.0x901(1G): 0x80 [ 485.577260] mv2112_update_link: 3.0x8109(100M): 0x0 [ 485.577302] mv2112_update_link: link 0x0 [ 485.577344] mv2112_read_status: autoneg is disabled [ 486.188917] i2c_geni 980000.i2c: i2c error :-107 [ 486.194198] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 486.206486] i2c_geni 980000.i2c: i2c error :-107 [ 486.211722] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 486.600904] mv2112_read_status [ 486.601224] mv2112_update_link: 3.0x901(1G): 0x80 [ 486.601533] mv2112_update_link: 3.0x8109(100M): 0x0 [ 486.601575] mv2112_update_link: link 0x0 [ 486.601617] mv2112_read_status: autoneg is disabled [ 486.692643] perf: interrupt took too long (6270 > 6198), lowering kernel.perf_event_max_sample_rate to 31750 [ 487.624853] mv2112_read_status [ 487.625209] mv2112_update_link: 3.0x901(1G): 0x80 [ 487.625548] mv2112_update_link: 3.0x8109(100M): 0x0 [ 487.625592] mv2112_update_link: link 0x0 [ 487.625636] mv2112_read_status: autoneg is disabled [ 488.187267] init: starting service 'qvrd_vndr'... [ 488.190534] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 488.193303] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 488.229682] init: starting service 'sxrd'... [ 488.234002] i2c_geni 980000.i2c: i2c error :-107 [ 488.238933] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 488.250581] i2c_geni 980000.i2c: i2c error :-107 [ 488.255461] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 488.270043] init: Service 'qvrd_vndr' (pid 4108) exited with status 1 [ 488.270073] init: Sending signal 9 to service 'qvrd_vndr' (pid 4108) process group... [ 488.270293] libprocessgroup: Successfully killed process cgroup uid 1000 pid 4108 in 0ms [ 488.276119] init: Service 'sxrd' (pid 4109) exited with status 1 [ 488.276139] init: Sending signal 9 to service 'sxrd' (pid 4109) process group... [ 488.276360] libprocessgroup: Successfully killed process cgroup uid 1000 pid 4109 in 0ms [ 488.648517] mv2112_read_status [ 488.648781] mv2112_update_link: 3.0x901(1G): 0x80 [ 488.649016] mv2112_update_link: 3.0x8109(100M): 0x0 [ 488.649035] mv2112_update_link: link 0x0 [ 488.649052] mv2112_read_status: autoneg is disabled [ 489.673021] mv2112_read_status [ 489.673278] mv2112_update_link: 3.0x901(1G): 0x80 [ 489.673514] mv2112_update_link: 3.0x8109(100M): 0x0 [ 489.673531] mv2112_update_link: link 0x0 [ 489.673549] mv2112_read_status: autoneg is disabled [ 490.282792] i2c_geni 980000.i2c: i2c error :-107 [ 490.288197] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 490.299807] i2c_geni 980000.i2c: i2c error :-107 [ 490.306149] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 490.697177] mv2112_read_status [ 490.697548] mv2112_update_link: 3.0x901(1G): 0x80 [ 490.697859] mv2112_update_link: 3.0x8109(100M): 0x0 [ 490.697904] mv2112_update_link: link 0x0 [ 490.697947] mv2112_read_status: autoneg is disabled [ 491.720483] mv2112_read_status [ 491.720734] mv2112_update_link: 3.0x901(1G): 0x80 [ 491.720974] mv2112_update_link: 3.0x8109(100M): 0x0 [ 491.720991] mv2112_update_link: link 0x0 [ 491.721007] mv2112_read_status: autoneg is disabled [ 492.118579] type=1400 audit(1661508630.223:124): avc: denied { syslog_read } for comm="dmesg" scontext=u:r:shell:s0 tcontext=u:r:kernel:s0 tclass=system permissive=0 [ 492.332503] i2c_geni 980000.i2c: i2c error :-107 [ 492.338216] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 492.350263] i2c_geni 980000.i2c: i2c error :-107 [ 492.355410] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 492.744439] mv2112_read_status [ 492.744991] mv2112_update_link: 3.0x901(1G): 0x80 [ 492.745230] mv2112_update_link: 3.0x8109(100M): 0x0 [ 492.745247] mv2112_update_link: link 0x0 [ 492.745264] mv2112_read_status: autoneg is disabled [ 493.218198] init: starting service 'qvrd_vndr'... [ 493.225473] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 493.231552] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 493.294418] init: starting service 'sxrd'... [ 493.322711] init: Service 'qvrd_vndr' (pid 4113) exited with status 1 [ 493.322738] init: Sending signal 9 to service 'qvrd_vndr' (pid 4113) process group... [ 493.322953] libprocessgroup: Successfully killed process cgroup uid 1000 pid 4113 in 0ms [ 493.373151] init: Service 'sxrd' (pid 4114) exited with status 1 [ 493.373193] init: Sending signal 9 to service 'sxrd' (pid 4114) process group... [ 493.373542] libprocessgroup: Successfully killed process cgroup uid 1000 pid 4114 in 0ms [ 493.769559] mv2112_read_status [ 493.769903] mv2112_update_link: 3.0x901(1G): 0x80 [ 493.770231] mv2112_update_link: 3.0x8109(100M): 0x0 [ 493.770275] mv2112_update_link: link 0x0 [ 493.770317] mv2112_read_status: autoneg is disabled [ 494.380535] i2c_geni 980000.i2c: i2c error :-107 [ 494.385639] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 494.401558] i2c_geni 980000.i2c: i2c error :-107 [ 494.406455] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 494.589320] ipa_mpm ipa_mpm_start_stop_remote_mhip_chan:1644 MHI not initialized yet, probe in progress [ 494.600582] ipa_mpm ipa_mpm_vote_unvote_pcie_clk:1530 MHI not initialized yet [ 494.636868] ipa ipa3_cfg_ep_holb:5245 bad parm. [ 494.642449] ipa __ipa3_stop_gsi_channel:7709 Enable HOLB failed ep:17 [ 494.649230] ipa ipa3_cfg_ep_ctrl:4812 pipe setting delay is not supported [ 494.656249] ipa_mpm ipa_mpm_start_stop_remote_mhip_chan:1644 MHI not initialized yet, probe in progress [ 494.666228] ipa_mpm ipa_mpm_start_stop_mhip_chan:1736 MHIP probe 1 not initialized [ 494.674057] ipa_mpm ipa_mpm_mhip_xdci_pipe_disable:3082 Active tethe count is 0 [ 494.674062] ipa_mpm ipa_mpm_vote_unvote_pcie_clk:1530 MHI not initialized yet [ 494.792569] mv2112_read_status [ 494.792856] mv2112_update_link: 3.0x901(1G): 0x80 [ 494.793123] mv2112_update_link: 3.0x8109(100M): 0x0 [ 494.793157] mv2112_update_link: link 0x0 [ 494.793190] mv2112_read_status: autoneg is disabled [ 494.937334] read descriptors [ 494.938457] read strings [ 494.965342] msm-dwc3 a600000.ssusb: ep [gsi-epin1,29] already configured as msm endpoint [ 494.983142] msm-dwc3 a600000.ssusb: ep [gsi-epin2,31] already configured as msm endpoint [ 494.991600] msm-dwc3 a600000.ssusb: ep [gsi-epout1,30] already configured as msm endpoint [ 495.087378] android_work: sent uevent USB_STATE=DISCONNECTED [ 495.184228] msm-dwc3 a600000.ssusb: Could not get usb psy [ 495.816675] mv2112_read_status [ 495.816986] mv2112_update_link: 3.0x901(1G): 0x80 [ 495.817266] mv2112_update_link: 3.0x8109(100M): 0x0 [ 495.817296] mv2112_update_link: link 0x0 [ 495.817327] mv2112_read_status: autoneg is disabled [ 496.199504] msm-dwc3 a600000.ssusb: Could not get usb psy [ 496.207263] android_work: did not send uevent (0 0 0000000000000000) [ 496.271224] android_work: sent uevent USB_STATE=CONNECTED [ 496.427869] i2c_geni 980000.i2c: i2c error :-107 [ 496.434411] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 496.446986] i2c_geni 980000.i2c: i2c error :-107 [ 496.452007] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 496.587247] configfs-gadget gadget: high-speed config #1: b [ 496.592144] msm-dwc3 a600000.ssusb: Could not get usb psy [ 496.611350] android_work: sent uevent USB_STATE=CONFIGURED [ 496.630750] ipa_mpm ipa_mpm_vote_unvote_pcie_clk:1530 MHI not initialized yet [ 496.638415] ipa_mpm ipa_mpm_start_stop_remote_mhip_chan:1644 MHI not initialized yet, probe in progress [ 496.649479] ipa_mpm ipa_mpm_start_stop_mhip_chan:1736 MHIP probe 1 not initialized [ 496.657463] ipa ipa3_cfg_ep_ctrl:4812 pipe setting delay is not supported [ 496.673355] ipa_usb_notify_cb: Set net_ready_trigger [ 496.678359] ipa_mpm ipa_mpm_vote_unvote_pcie_clk:1530 MHI not initialized yet [ 496.691969] ipa_mpm ipa_mpm_start_stop_remote_mhip_chan:1644 MHI not initialized yet, probe in progress [ 496.701955] ipa_usb_notify_cb: Set net_ready_trigger [ 496.840601] mv2112_read_status [ 496.848908] mv2112_update_link: 3.0x901(1G): 0x80 [ 496.849182] mv2112_update_link: 3.0x8109(100M): 0x0 [ 496.849217] mv2112_update_link: link 0x0 [ 496.849252] mv2112_read_status: autoneg is disabled [ 497.864482] mv2112_read_status [ 497.864766] mv2112_update_link: 3.0x901(1G): 0x80 [ 497.865021] mv2112_update_link: 3.0x8109(100M): 0x0 [ 497.865042] mv2112_update_link: link 0x0 [ 497.865063] mv2112_read_status: autoneg is disabled [ 498.281413] init: starting service 'qvrd_vndr'... [ 498.292030] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 498.297675] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 498.355072] init: starting service 'sxrd'... [ 498.383340] init: Service 'qvrd_vndr' (pid 4131) exited with status 1 [ 498.383369] init: Sending signal 9 to service 'qvrd_vndr' (pid 4131) process group... [ 498.383567] libprocessgroup: Successfully killed process cgroup uid 1000 pid 4131 in 0ms [ 498.420052] init: Service 'sxrd' (pid 4132) exited with status 1 [ 498.420100] init: Sending signal 9 to service 'sxrd' (pid 4132) process group... [ 498.420747] libprocessgroup: Successfully killed process cgroup uid 1000 pid 4132 in 0ms [ 498.475372] i2c_geni 980000.i2c: i2c error :-107 [ 498.481394] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 498.492233] i2c_geni 980000.i2c: i2c error :-107 [ 498.497265] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 498.889088] mv2112_read_status [ 498.889432] mv2112_update_link: 3.0x901(1G): 0x80 [ 498.889740] mv2112_update_link: 3.0x8109(100M): 0x0 [ 498.889784] mv2112_update_link: link 0x0 [ 498.889828] mv2112_read_status: autoneg is disabled [ 499.913457] mv2112_read_status [ 499.914121] mv2112_update_link: 3.0x901(1G): 0x80 [ 499.914427] mv2112_update_link: 3.0x8109(100M): 0x0 [ 499.914473] mv2112_update_link: link 0x0 [ 499.914515] mv2112_read_status: autoneg is disabled [ 500.524137] i2c_geni 980000.i2c: i2c error :-107 [ 500.529245] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 500.541121] i2c_geni 980000.i2c: i2c error :-107 [ 500.546412] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 500.936724] mv2112_read_status [ 500.937043] mv2112_update_link: 3.0x901(1G): 0x80 [ 500.937380] mv2112_update_link: 3.0x8109(100M): 0x0 [ 500.937424] mv2112_update_link: link 0x0 [ 500.937466] mv2112_read_status: autoneg is disabled [ 501.961239] mv2112_read_status [ 501.961559] mv2112_update_link: 3.0x901(1G): 0x80 [ 501.961868] mv2112_update_link: 3.0x8109(100M): 0x0 [ 501.961912] mv2112_update_link: link 0x0 [ 501.961954] mv2112_read_status: autoneg is disabled [ 502.572064] i2c_geni 980000.i2c: i2c error :-107 [ 502.577383] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 502.588029] i2c_geni 980000.i2c: i2c error :-107 [ 502.592933] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 502.984994] mv2112_read_status [ 502.985352] mv2112_update_link: 3.0x901(1G): 0x80 [ 502.985661] mv2112_update_link: 3.0x8109(100M): 0x0 [ 502.985705] mv2112_update_link: link 0x0 [ 502.985748] mv2112_read_status: autoneg is disabled [ 503.341511] init: starting service 'qvrd_vndr'... [ 503.349466] init: Created socket '/dev/socket/qvrservice_vndr', mode 660, user 1000, group 1000 [ 503.356782] init: Created socket '/dev/socket/qvrservice_vndr_camera', mode 660, user 1000, group 1000 [ 503.413951] init: starting service 'sxrd'... [ 503.445312] init: Service 'qvrd_vndr' (pid 4134) exited with status 1 [ 503.445347] init: Sending signal 9 to service 'qvrd_vndr' (pid 4134) process group... [ 503.445620] libprocessgroup: Successfully killed process cgroup uid 1000 pid 4134 in 0ms [ 503.483186] init: Service 'sxrd' (pid 4135) exited with status 1 [ 503.483356] init: Sending signal 9 to service 'sxrd' (pid 4135) process group... [ 503.486017] libprocessgroup: Successfully killed process cgroup uid 1000 pid 4135 in 2ms [ 504.009643] mv2112_read_status [ 504.010621] mv2112_update_link: 3.0x901(1G): 0x80 [ 504.010934] mv2112_update_link: 3.0x8109(100M): 0x0 [ 504.010978] mv2112_update_link: link 0x0 [ 504.011021] mv2112_read_status: autoneg is disabled [ 504.618868] i2c_geni 980000.i2c: i2c error :-107 [ 504.623988] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x22 value:0x80 [ 504.634312] i2c_geni 980000.i2c: i2c error :-107 [ 504.642983] [MAX975X:mcu_keep_wakeup_work_func] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x09 [ 505.035487] mv2112_read_status [ 505.036150] mv2112_update_link: 3.0x901(1G): 0x80 [ 505.036688] mv2112_update_link: 3.0x8109(100M): 0x0 [ 505.036733] mv2112_update_link: link 0x0 [ 505.036776] mv2112_read_status: autoneg is disabled