Figure

[79467.421306] i2c_geni 980000.i2c: i2c error :-107

[79467.426255] [MAX975X:max96755g_read_byte] *ERROR* Failed to read dev:0x4c addr:0x0013

[79467.436220] i2c_geni 980000.i2c: i2c error :-107

[79467.441357] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0010 value:0x00

[79467.451757] i2c_geni 980000.i2c: i2c error :-107

[79467.456595] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0001 value:0x01

[79467.466578] i2c_geni 980000.i2c: i2c error :-107

[79467.471408] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x01ce value:0x4f

[79467.481724] i2c_geni 980000.i2c: i2c error :-107

[79467.486554] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0010 value:0x20

[79467.601409] i2c_geni 980000.i2c: i2c error :-107

[79467.606304] [MAX975X:max96755g_read_byte] *ERROR* Failed to read dev:0x4c addr:0x0013

[79467.614519] [MAX975X:max96755x_init] *ERROR* read:752 0x13:00

[79467.621223] [MAX975X:max96755x_init] *ERROR* read:755 0x13:02

[79467.627208] [MAX975X:max96755x_init] *ERROR* done

[79467.680733] mv2112_read_status

[79467.684194] mv2112_update_link: 3.0x901(1G): 0x80

[79467.689600] mv2112_update_link: 3.0x8109(100M): 0x8

[79467.702563] mv2112_update_link: link 0x0

[79467.706811] mv2112_read_status: autoneg is disabled

[79468.736744] mv2112_read_status

[79468.740508] mv2112_update_link: 3.0x901(1G): 0x80

[79468.745722] mv2112_update_link: 3.0x8109(100M): 0x8

[79468.751010] mv2112_update_link: link 0x0

[79468.755200] mv2112_read_status: autoneg is disabled

[79469.506142] [MAX975X:mcu_keep_wakeup_work_func] *ERROR*  ERR gpio detected

[79469.568558] [MAX975X:max96755x_init] *ERROR* begin

[79469.629021] i2c_geni 980000.i2c: i2c error :-107

[79469.633933] [MAX975X:max96755g_read_byte] *ERROR* Failed to read dev:0x4c addr:0x0013

[79469.657644] i2c_geni 980000.i2c: i2c error :-107

[79469.662529] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0010 value:0x00

[79469.672925] i2c_geni 980000.i2c: i2c error :-107

[79469.677779] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0001 value:0x01

[79469.687709] i2c_geni 980000.i2c: i2c error :-107

[79469.692542] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x01ce value:0x4f

[79469.702407] i2c_geni 980000.i2c: i2c error :-107

[79469.707220] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0010 value:0x20

[79469.760793] mv2112_read_status

[79469.764242] mv2112_update_link: 3.0x901(1G): 0x80

[79469.771196] mv2112_update_link: 3.0x8109(100M): 0x8

[79469.777823] mv2112_update_link: link 0x0

[79469.782119] mv2112_read_status: autoneg is disabled

[79469.820861] i2c_geni 980000.i2c: i2c error :-107

[79469.825767] [MAX975X:max96755g_read_byte] *ERROR* Failed to read dev:0x4c addr:0x0013

[79469.834611] [MAX975X:max96755x_init] *ERROR* read:752 0x13:00

[79469.842094] [MAX975X:max96755x_init] *ERROR* read:755 0x13:02

[79469.848054] [MAX975X:max96755x_init] *ERROR* done

[79470.784621] mv2112_read_status

[79470.788294] mv2112_update_link: 3.0x901(1G): 0x80

[79470.793482] mv2112_update_link: 3.0x8109(100M): 0x8

[79470.798725] mv2112_update_link: link 0x0

[79470.802833] mv2112_read_status: autoneg is disabled

[79471.714389] [MAX975X:mcu_keep_wakeup_work_func] *ERROR*  ERR gpio detected

[79471.776564] [MAX975X:max96755x_init] *ERROR* begin

[79471.808573] mv2112_read_status

[79471.811985] mv2112_update_link: 3.0x901(1G): 0x80

[79471.817419] mv2112_update_link: 3.0x8109(100M): 0x8

[79471.822744] mv2112_update_link: link 0x0

[79471.826963] mv2112_read_status: autoneg is disabled

[79471.837132] i2c_geni 980000.i2c: i2c error :-107

[79471.845829] [MAX975X:max96755g_read_byte] *ERROR* Failed to read dev:0x4c addr:0x0013

[79471.855568] i2c_geni 980000.i2c: i2c error :-107

[79471.860661] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0010 value:0x00

[79471.871307] i2c_geni 980000.i2c: i2c error :-107

[79471.876173] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0001 value:0x01

[79471.886651] i2c_geni 980000.i2c: i2c error :-107

[79471.891477] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x01ce value:0x4f

[79471.901411] i2c_geni 980000.i2c: i2c error :-107

[79471.906248] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0010 value:0x20

[79472.017333] i2c_geni 980000.i2c: i2c error :-107

[79472.022251] [MAX975X:max96755g_read_byte] *ERROR* Failed to read dev:0x4c addr:0x0013

[79472.030594] [MAX975X:max96755x_init] *ERROR* read:752 0x13:00

[79472.037593] [MAX975X:max96755x_init] *ERROR* read:755 0x13:02

[79472.043590] [MAX975X:max96755x_init] *ERROR* done

[79472.832763] mv2112_read_status

[79472.836214] mv2112_update_link: 3.0x901(1G): 0x80

[79472.841698] mv2112_update_link: 3.0x8109(100M): 0x8

[79472.846863] mv2112_update_link: link 0x0

[79472.851109] mv2112_read_status: autoneg is disabled

[79473.856755] mv2112_read_status

[79473.860212] mv2112_update_link: 3.0x901(1G): 0x80

[79473.865707] mv2112_update_link: 3.0x8109(100M): 0x8

[79473.870850] mv2112_update_link: link 0x0

[79473.875058] mv2112_read_status: autoneg is disabled

[79473.922689] [MAX975X:mcu_keep_wakeup_work_func] *ERROR*  ERR gpio detected

[79473.984591] [MAX975X:max96755x_init] *ERROR* begin

[79474.045204] i2c_geni 980000.i2c: i2c error :-107

[79474.050208] [MAX975X:max96755g_read_byte] *ERROR* Failed to read dev:0x4c addr:0x0013

[79474.063437] i2c_geni 980000.i2c: i2c error :-107

[79474.068811] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0010 value:0x00

[79474.080237] i2c_geni 980000.i2c: i2c error :-107

[79474.085865] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0001 value:0x01

[79474.097013] i2c_geni 980000.i2c: i2c error :-107

[79474.101881] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x01ce value:0x4f

[79474.111715] i2c_geni 980000.i2c: i2c error :-107

[79474.116589] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0010 value:0x20

[79474.229412] i2c_geni 980000.i2c: i2c error :-107

[79474.234445] [MAX975X:max96755g_read_byte] *ERROR* Failed to read dev:0x4c addr:0x0013

[79474.242907] [MAX975X:max96755x_init] *ERROR* read:752 0x13:00

[79474.250113] [MAX975X:max96755x_init] *ERROR* read:755 0x13:02

[79474.256315] [MAX975X:max96755x_init] *ERROR* done

[79474.880570] mv2112_read_status

[79474.884202] mv2112_update_link: 3.0x901(1G): 0x80

[79474.889522] mv2112_update_link: 3.0x8109(100M): 0x8

[79474.894914] mv2112_update_link: link 0x0

[79474.899330] mv2112_read_status: autoneg is disabled

[79475.904536] mv2112_read_status

[79475.907987] mv2112_update_link: 3.0x901(1G): 0x80

[79475.913273] mv2112_update_link: 3.0x8109(100M): 0x8

[79475.918416] mv2112_update_link: link 0x0

[79475.922550] mv2112_read_status: autoneg is disabled

[79476.130393] [MAX975X:mcu_keep_wakeup_work_func] *ERROR*  ERR gpio detected

[79476.192780] [MAX975X:max96755x_init] *ERROR* begin

[79476.253145] i2c_geni 980000.i2c: i2c error :-107

[79476.258099] [MAX975X:max96755g_read_byte] *ERROR* Failed to read dev:0x4c addr:0x0013

[79476.268201] i2c_geni 980000.i2c: i2c error :-107

[79476.273823] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0010 value:0x00

[79476.284229] i2c_geni 980000.i2c: i2c error :-107

[79476.289136] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0001 value:0x01

[79476.299257] i2c_geni 980000.i2c: i2c error :-107

[79476.304083] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x01ce value:0x4f

[79476.314110] i2c_geni 980000.i2c: i2c error :-107

[79476.318959] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0010 value:0x20

[79476.433274] i2c_geni 980000.i2c: i2c error :-107

[79476.438233] [MAX975X:max96755g_read_byte] *ERROR* Failed to read dev:0x4c addr:0x0013

[79476.446681] [MAX975X:max96755x_init] *ERROR* read:752 0x13:00

[79476.453640] [MAX975X:max96755x_init] *ERROR* read:755 0x13:02

[79476.459872] [MAX975X:max96755x_init] *ERROR* done

[79476.928735] mv2112_read_status

[79476.932186] mv2112_update_link: 3.0x901(1G): 0x80

[79476.937623] mv2112_update_link: 3.0x8109(100M): 0x8

[79476.942757] mv2112_update_link: link 0x0

[79476.947004] mv2112_read_status: autoneg is disabled

[79477.952765] mv2112_read_status

[79477.956215] mv2112_update_link: 3.0x901(1G): 0x80

[79477.961501] mv2112_update_link: 3.0x8109(100M): 0x8

[79477.966639] mv2112_update_link: link 0x0

[79477.970876] mv2112_read_status: autoneg is disabled

[79478.338446] [MAX975X:mcu_keep_wakeup_work_func] *ERROR*  ERR gpio detected

[79478.400769] [MAX975X:max96755x_init] *ERROR* begin

[79478.461555] i2c_geni 980000.i2c: i2c error :-107

[79478.466504] [MAX975X:max96755g_read_byte] *ERROR* Failed to read dev:0x4c addr:0x0013

[79478.476484] i2c_geni 980000.i2c: i2c error :-107

[79478.481340] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0010 value:0x00

[79478.491951] i2c_geni 980000.i2c: i2c error :-107

[79478.496834] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0001 value:0x01

[79478.506749] i2c_geni 980000.i2c: i2c error :-107

[79478.511568] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x01ce value:0x4f

[79478.522974] i2c_geni 980000.i2c: i2c error :-107

[79478.527819] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0010 value:0x20

[79478.641112] i2c_geni 980000.i2c: i2c error :-107

[79478.646067] [MAX975X:max96755g_read_byte] *ERROR* Failed to read dev:0x4c addr:0x0013

[79478.654314] [MAX975X:max96755x_init] *ERROR* read:752 0x13:00

[79478.660894] [MAX975X:max96755x_init] *ERROR* read:755 0x13:02

[79478.666863] [MAX975X:max96755x_init] *ERROR* done

[79478.976925] mv2112_read_status

[79478.980604] mv2112_update_link: 3.0x901(1G): 0x80

[79478.992874] mv2112_update_link: 3.0x8109(100M): 0x8

[79479.004556] mv2112_update_link: link 0x0

[79479.009345] mv2112_read_status: autoneg is disabled

[79480.032739] mv2112_read_status

[79480.036188] mv2112_update_link: 3.0x901(1G): 0x80

[79480.041672] mv2112_update_link: 3.0x8109(100M): 0x8

[79480.046815] mv2112_update_link: link 0x0

[79480.051060] mv2112_read_status: autoneg is disabled

[79480.546445] [MAX975X:mcu_keep_wakeup_work_func] *ERROR*  ERR gpio detected

[79480.608577] [MAX975X:max96755x_init] *ERROR* begin

[79480.669038] i2c_geni 980000.i2c: i2c error :-107

[79480.673965] [MAX975X:max96755g_read_byte] *ERROR* Failed to read dev:0x4c addr:0x0013

[79480.684322] i2c_geni 980000.i2c: i2c error :-107

[79480.690452] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0010 value:0x00

[79480.702003] i2c_geni 980000.i2c: i2c error :-107

[79480.706869] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0001 value:0x01

[79480.717315] i2c_geni 980000.i2c: i2c error :-107

[79480.722165] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x01ce value:0x4f

[79480.731989] i2c_geni 980000.i2c: i2c error :-107

[79480.736836] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0010 value:0x20

[79480.849831] i2c_geni 980000.i2c: i2c error :-107

[79480.854665] [MAX975X:max96755g_read_byte] *ERROR* Failed to read dev:0x4c addr:0x0013

[79480.862868] [MAX975X:max96755x_init] *ERROR* read:752 0x13:00

[79480.869860] [MAX975X:max96755x_init] *ERROR* read:755 0x13:02

[79480.875828] [MAX975X:max96755x_init] *ERROR* done

[79481.056742] mv2112_read_status

[79481.060191] mv2112_update_link: 3.0x901(1G): 0x80

[79481.065608] mv2112_update_link: 3.0x8109(100M): 0x8

[79481.070757] mv2112_update_link: link 0x0

[79481.074974] mv2112_read_status: autoneg is disabled

[79482.080762] mv2112_read_status

[79482.084216] mv2112_update_link: 3.0x901(1G): 0x80

[79482.089531] mv2112_update_link: 3.0x8109(100M): 0x8

[79482.094664] mv2112_update_link: link 0x0

[79482.098904] mv2112_read_status: autoneg is disabled

[79482.754492] [MAX975X:mcu_keep_wakeup_work_func] *ERROR*  ERR gpio detected

[79482.816782] [MAX975X:max96755x_init] *ERROR* begin

[79482.877379] i2c_geni 980000.i2c: i2c error :-107

[79482.882335] [MAX975X:max96755g_read_byte] *ERROR* Failed to read dev:0x4c addr:0x0013

[79482.901027] i2c_geni 980000.i2c: i2c error :-107

[79482.906571] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0010 value:0x00

[79482.917316] i2c_geni 980000.i2c: i2c error :-107

[79482.922150] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0001 value:0x01

[79482.932380] i2c_geni 980000.i2c: i2c error :-107

[79482.937210] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x01ce value:0x4f

[79482.947903] i2c_geni 980000.i2c: i2c error :-107

[79482.952726] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0010 value:0x20

[79483.065042] i2c_geni 980000.i2c: i2c error :-107

[79483.070062] [MAX975X:max96755g_read_byte] *ERROR* Failed to read dev:0x4c addr:0x0013

[79483.078283] [MAX975X:max96755x_init] *ERROR* read:752 0x13:00

[79483.084807] [MAX975X:max96755x_init] *ERROR* read:755 0x13:02

[79483.090790] [MAX975X:max96755x_init] *ERROR* done

[79483.104463] mv2112_read_status

[79483.107858] mv2112_update_link: 3.0x901(1G): 0x80

[79483.113706] mv2112_update_link: 3.0x8109(100M): 0x8

[79483.118911] mv2112_update_link: link 0x0

[79483.123051] mv2112_read_status: autoneg is disabled

[79484.128738] mv2112_read_status

[79484.132189] mv2112_update_link: 3.0x901(1G): 0x80

[79484.137662] mv2112_update_link: 3.0x8109(100M): 0x8

[79484.142807] mv2112_update_link: link 0x0

[79484.147247] mv2112_read_status: autoneg is disabled

[79484.962554] [MAX975X:mcu_keep_wakeup_work_func] *ERROR*  ERR gpio detected

[79485.024757] [MAX975X:max96755x_init] *ERROR* begin

[79485.085685] i2c_geni 980000.i2c: i2c error :-107

[79485.090640] [MAX975X:max96755g_read_byte] *ERROR* Failed to read dev:0x4c addr:0x0013

[79485.110732] i2c_geni 980000.i2c: i2c error :-107

[79485.120202] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0010 value:0x00

[79485.133445] i2c_geni 980000.i2c: i2c error :-107

[79485.138316] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0001 value:0x01

[79485.148157] i2c_geni 980000.i2c: i2c error :-107

[79485.152412] mv2112_read_status

[79485.152990] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x01ce value:0x4f

[79485.156277] mv2112_update_link: 3.0x901(1G): 0x80

[79485.166163] i2c_geni 980000.i2c: i2c error :-107

[79485.170507] mv2112_update_link: 3.0x8109(100M): 0x8

[79485.175127] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0010 value:0x20

[79485.180265] mv2112_update_link: link 0x0

[79485.193652] mv2112_read_status: autoneg is disabled

[79485.293028] i2c_geni 980000.i2c: i2c error :-107

[79485.297920] [MAX975X:max96755g_read_byte] *ERROR* Failed to read dev:0x4c addr:0x0013

[79485.306899] [MAX975X:max96755x_init] *ERROR* read:752 0x13:00

[79485.314130] [MAX975X:max96755x_init] *ERROR* read:755 0x13:02

[79485.320188] [MAX975X:max96755x_init] *ERROR* done

[79486.208745] mv2112_read_status

[79486.212197] mv2112_update_link: 3.0x901(1G): 0x80

[79486.217659] mv2112_update_link: 3.0x8109(100M): 0x8

[79486.222970] mv2112_update_link: link 0x0

[79486.227227] mv2112_read_status: autoneg is disabled

[79487.202521] [MAX975X:mcu_keep_wakeup_work_func] *ERROR*  ERR gpio detected

[79487.232409] mv2112_read_status

[79487.235907] mv2112_update_link: 3.0x901(1G): 0x80

[79487.241117] mv2112_update_link: 3.0x8109(100M): 0x8

[79487.246204] mv2112_update_link: link 0x0

[79487.250308] mv2112_read_status: autoneg is disabled

[79487.264429] [MAX975X:max96755x_init] *ERROR* begin

[79487.324946] i2c_geni 980000.i2c: i2c error :-107

[79487.329888] [MAX975X:max96755g_read_byte] *ERROR* Failed to read dev:0x4c addr:0x0013

[79487.339273] i2c_geni 980000.i2c: i2c error :-107

[79487.344511] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0010 value:0x00

[79487.355335] i2c_geni 980000.i2c: i2c error :-107

[79487.360280] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0001 value:0x01

[79487.370265] i2c_geni 980000.i2c: i2c error :-107

[79487.375121] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x01ce value:0x4f

[79487.385049] i2c_geni 980000.i2c: i2c error :-107

[79487.389886] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0010 value:0x20

[79487.500817] i2c_geni 980000.i2c: i2c error :-107

[79487.505649] [MAX975X:max96755g_read_byte] *ERROR* Failed to read dev:0x4c addr:0x0013

[79487.513859] [MAX975X:max96755x_init] *ERROR* read:752 0x13:00

[79487.520226] [MAX975X:max96755x_init] *ERROR* read:755 0x13:02

[79487.526595] [MAX975X:max96755x_init] *ERROR* done

[79488.256758] mv2112_read_status

[79488.260214] mv2112_update_link: 3.0x901(1G): 0x80

[79488.265681] mv2112_update_link: 3.0x8109(100M): 0x8

[79488.270825] mv2112_update_link: link 0x0

[79488.275065] mv2112_read_status: autoneg is disabled

[79489.280742] mv2112_read_status

[79489.284547] mv2112_update_link: 3.0x901(1G): 0x80

[79489.289757] mv2112_update_link: 3.0x8109(100M): 0x8

[79489.294973] mv2112_update_link: link 0x0

[79489.299125] mv2112_read_status: autoneg is disabled

[79489.410329] [MAX975X:mcu_keep_wakeup_work_func] *ERROR*  ERR gpio detected

[79489.472575] [MAX975X:max96755x_init] *ERROR* begin

[79489.533018] i2c_geni 980000.i2c: i2c error :-107

[79489.537949] [MAX975X:max96755g_read_byte] *ERROR* Failed to read dev:0x4c addr:0x0013

[79489.547518] i2c_geni 980000.i2c: i2c error :-107

[79489.552739] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0010 value:0x00

[79489.563410] i2c_geni 980000.i2c: i2c error :-107

[79489.568504] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0001 value:0x01

[79489.578403] i2c_geni 980000.i2c: i2c error :-107

[79489.583257] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x01ce value:0x4f

[79489.593113] i2c_geni 980000.i2c: i2c error :-107

[79489.597932] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0010 value:0x20

[79489.709246] i2c_geni 980000.i2c: i2c error :-107

[79489.714140] [MAX975X:max96755g_read_byte] *ERROR* Failed to read dev:0x4c addr:0x0013

[79489.722457] [MAX975X:max96755x_init] *ERROR* read:752 0x13:00

[79489.729131] [MAX975X:max96755x_init] *ERROR* read:755 0x13:02

[79489.735202] [MAX975X:max96755x_init] *ERROR* done

[79490.304743] mv2112_read_status

[79490.308200] mv2112_update_link: 3.0x901(1G): 0x80

[79490.313658] mv2112_update_link: 3.0x8109(100M): 0x8

[79490.332463] mv2112_update_link: link 0x0

[79490.336886] mv2112_read_status: autoneg is disabled

[79491.360520] mv2112_read_status

[79491.363975] mv2112_update_link: 3.0x901(1G): 0x80

[79491.370226] mv2112_update_link: 3.0x8109(100M): 0x8

[79491.376554] mv2112_update_link: link 0x0

[79491.380686] mv2112_read_status: autoneg is disabled

[79491.618046] [MAX975X:mcu_keep_wakeup_work_func] *ERROR*  ERR gpio detected

[79491.680537] [MAX975X:max96755x_init] *ERROR* begin

[79491.740977] i2c_geni 980000.i2c: i2c error :-107

[79491.745992] [MAX975X:max96755g_read_byte] *ERROR* Failed to read dev:0x4c addr:0x0013

[79491.756092] i2c_geni 980000.i2c: i2c error :-107

[79491.761101] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0010 value:0x00

[79491.771696] i2c_geni 980000.i2c: i2c error :-107

[79491.776608] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0001 value:0x01

[79491.786425] i2c_geni 980000.i2c: i2c error :-107

[79491.791265] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x01ce value:0x4f

[79491.801130] i2c_geni 980000.i2c: i2c error :-107

[79491.805949] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0010 value:0x20

[79491.917285] i2c_geni 980000.i2c: i2c error :-107

[79491.922202] [MAX975X:max96755g_read_byte] *ERROR* Failed to read dev:0x4c addr:0x0013

[79491.934293] [MAX975X:max96755x_init] *ERROR* read:752 0x13:00

[79491.941457] [MAX975X:max96755x_init] *ERROR* read:755 0x13:02

[79491.947517] [MAX975X:max96755x_init] *ERROR* done

[79492.384779] mv2112_read_status

[79492.388647] mv2112_update_link: 3.0x901(1G): 0x80

[79492.393936] mv2112_update_link: 3.0x8109(100M): 0x8

[79492.399385] mv2112_update_link: link 0x0

[79492.403516] mv2112_read_status: autoneg is disabled

[79493.440741] mv2112_read_status

[79493.444724] mv2112_update_link: 3.0x901(1G): 0x80

[79493.449941] mv2112_update_link: 3.0x8109(100M): 0x8

[79493.455168] mv2112_update_link: link 0x0

[79493.459323] mv2112_read_status: autoneg is disabled

[79493.826417] [MAX975X:mcu_keep_wakeup_work_func] *ERROR*  ERR gpio detected

[79493.888553] [MAX975X:max96755x_init] *ERROR* begin

[79493.948993] i2c_geni 980000.i2c: i2c error :-107

[79493.954005] [MAX975X:max96755g_read_byte] *ERROR* Failed to read dev:0x4c addr:0x0013

[79493.963890] i2c_geni 980000.i2c: i2c error :-107

[79493.969591] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0010 value:0x00

[79493.981047] i2c_geni 980000.i2c: i2c error :-107

[79493.986022] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0001 value:0x01

[79493.996613] i2c_geni 980000.i2c: i2c error :-107

[79494.001556] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x01ce value:0x4f

[79494.011404] i2c_geni 980000.i2c: i2c error :-107

[79494.016242] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0010 value:0x20

[79494.129002] i2c_geni 980000.i2c: i2c error :-107

[79494.133966] [MAX975X:max96755g_read_byte] *ERROR* Failed to read dev:0x4c addr:0x0013

[79494.142313] [MAX975X:max96755x_init] *ERROR* read:752 0x13:00

[79494.149097] [MAX975X:max96755x_init] *ERROR* read:755 0x13:02

[79494.155147] [MAX975X:max96755x_init] *ERROR* done

[79494.464535] mv2112_read_status

[79494.468160] mv2112_update_link: 3.0x901(1G): 0x80

[79494.473444] mv2112_update_link: 3.0x8109(100M): 0x8

[79494.478592] mv2112_update_link: link 0x0

[79494.482830] mv2112_read_status: autoneg is disabled

[79495.488738] mv2112_read_status

[79495.492187] mv2112_update_link: 3.0x901(1G): 0x80

[79495.497636] mv2112_update_link: 3.0x8109(100M): 0x8

[79495.502787] mv2112_update_link: link 0x0

[79495.507026] mv2112_read_status: autoneg is disabled

[79496.035067] [MAX975X:mcu_keep_wakeup_work_func] *ERROR*  ERR gpio detected

[79496.096530] [MAX975X:max96755x_init] *ERROR* begin

[79496.157597] i2c_geni 980000.i2c: i2c error :-107

[79496.162618] [MAX975X:max96755g_read_byte] *ERROR* Failed to read dev:0x4c addr:0x0013

[79496.173411] i2c_geni 980000.i2c: i2c error :-107

[79496.179442] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0010 value:0x00

[79496.189624] i2c_geni 980000.i2c: i2c error :-107

[79496.194451] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0001 value:0x01

[79496.204412] i2c_geni 980000.i2c: i2c error :-107

[79496.209289] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x01ce value:0x4f

[79496.219160] i2c_geni 980000.i2c: i2c error :-107

[79496.224234] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0010 value:0x20

[79496.337874] i2c_geni 980000.i2c: i2c error :-107

[79496.342711] [MAX975X:max96755g_read_byte] *ERROR* Failed to read dev:0x4c addr:0x0013

[79496.350923] [MAX975X:max96755x_init] *ERROR* read:752 0x13:00

[79496.357767] [MAX975X:max96755x_init] *ERROR* read:755 0x13:02

[79496.363733] [MAX975X:max96755x_init] *ERROR* done

[79496.512726] mv2112_read_status

[79496.516186] mv2112_update_link: 3.0x901(1G): 0x80

[79496.521635] mv2112_update_link: 3.0x8109(100M): 0x8

[79496.526780] mv2112_update_link: link 0x0

[79496.531030] mv2112_read_status: autoneg is disabled

[79497.536763] mv2112_read_status

[79497.540516] mv2112_update_link: 3.0x901(1G): 0x80

[79497.545735] mv2112_update_link: 3.0x8109(100M): 0x8

[79497.550964] mv2112_update_link: link 0x0

[79497.555118] mv2112_read_status: autoneg is disabled

[79498.241864] [MAX975X:mcu_keep_wakeup_work_func] *ERROR*  ERR gpio detected

[79498.304441] [MAX975X:max96755x_init] *ERROR* begin

[79498.365114] i2c_geni 980000.i2c: i2c error :-107

[79498.370092] [MAX975X:max96755g_read_byte] *ERROR* Failed to read dev:0x4c addr:0x0013

[79498.388905] i2c_geni 980000.i2c: i2c error :-107

[79498.393906] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0010 value:0x00

[79498.404878] i2c_geni 980000.i2c: i2c error :-107

[79498.409892] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0001 value:0x01

[79498.419934] i2c_geni 980000.i2c: i2c error :-107

[79498.424770] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x01ce value:0x4f

[79498.434596] i2c_geni 980000.i2c: i2c error :-107

[79498.439481] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0010 value:0x20

[79498.553045] i2c_geni 980000.i2c: i2c error :-107

[79498.557920] [MAX975X:max96755g_read_byte] *ERROR* Failed to read dev:0x4c addr:0x0013

[79498.560470] mv2112_read_status

[79498.566736] [MAX975X:max96755x_init] *ERROR* read:752 0x13:00

[79498.575620] mv2112_update_link: 3.0x901(1G): 0x80

[79498.576928] [MAX975X:max96755x_init] *ERROR* read:755 0x13:02

[79498.587048] [MAX975X:max96755x_init] *ERROR* done

[79498.587157] mv2112_update_link: 3.0x8109(100M): 0x8

[79498.597364] mv2112_update_link: link 0x0

[79498.601686] mv2112_read_status: autoneg is disabled

[79499.616548] mv2112_read_status

[79499.620972] mv2112_update_link: 3.0x901(1G): 0x80

[79499.626404] mv2112_update_link: 3.0x8109(100M): 0x8

[79499.631506] mv2112_update_link: link 0x0

[79499.635819] mv2112_read_status: autoneg is disabled

[79500.451288] [MAX975X:mcu_keep_wakeup_work_func] *ERROR*  ERR gpio detected

[79500.524532] [MAX975X:max96755x_init] *ERROR* begin

[79500.584848] i2c_geni 980000.i2c: i2c error :-107

[79500.590104] [MAX975X:max96755g_read_byte] *ERROR* Failed to read dev:0x4c addr:0x0013

[79500.599661] i2c_geni 980000.i2c: i2c error :-107

[79500.604850] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0010 value:0x00

[79500.615227] i2c_geni 980000.i2c: i2c error :-107

[79500.620297] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0001 value:0x01

[79500.631192] i2c_geni 980000.i2c: i2c error :-107

[79500.635995] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x01ce value:0x4f

[79500.645412] mv2112_read_status

[79500.645745] mv2112_update_link: 3.0x901(1G): 0x80

[79500.649136] i2c_geni 980000.i2c: i2c error :-107

[79500.654077] mv2112_update_link: 3.0x8109(100M): 0x8

[79500.658959] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0010 value:0x20

[79500.663943] mv2112_update_link: link 0x0

[79500.677451] mv2112_read_status: autoneg is disabled

[79500.776881] i2c_geni 980000.i2c: i2c error :-107

[79500.781751] [MAX975X:max96755g_read_byte] *ERROR* Failed to read dev:0x4c addr:0x0013

[79500.790069] [MAX975X:max96755x_init] *ERROR* read:752 0x13:00

[79500.802001] [MAX975X:max96755x_init] *ERROR* read:755 0x13:02

[79500.809305] [MAX975X:max96755x_init] *ERROR* done

[79501.698524] mv2112_read_status

[79501.702127] mv2112_update_link: 3.0x901(1G): 0x80

[79501.707478] mv2112_update_link: 3.0x8109(100M): 0x8

[79501.712575] mv2112_update_link: link 0x0

[79501.716955] mv2112_read_status: autoneg is disabled

[79502.690770] [MAX975X:mcu_keep_wakeup_work_func] *ERROR*  ERR gpio detected

[79502.720459] mv2112_read_status

[79502.723887] mv2112_update_link: 3.0x901(1G): 0x80

[79502.736243] mv2112_update_link: 3.0x8109(100M): 0x8

[79502.741378] mv2112_update_link: link 0x0

[79502.745468] mv2112_read_status: autoneg is disabled

[79502.752456] [MAX975X:max96755x_init] *ERROR* begin

[79502.812755] i2c_geni 980000.i2c: i2c error :-107

[79502.817715] [MAX975X:max96755g_read_byte] *ERROR* Failed to read dev:0x4c addr:0x0013

[79502.827373] i2c_geni 980000.i2c: i2c error :-107

[79502.832281] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0010 value:0x00

[79502.842650] i2c_geni 980000.i2c: i2c error :-107

[79502.847501] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0001 value:0x01

[79502.857969] i2c_geni 980000.i2c: i2c error :-107

[79502.862776] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x01ce value:0x4f

[79502.873351] i2c_geni 980000.i2c: i2c error :-107

[79502.878228] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0010 value:0x20

[79502.989057] i2c_geni 980000.i2c: i2c error :-107

[79502.994431] [MAX975X:max96755g_read_byte] *ERROR* Failed to read dev:0x4c addr:0x0013

[79503.002859] [MAX975X:max96755x_init] *ERROR* read:752 0x13:00

[79503.009446] [MAX975X:max96755x_init] *ERROR* read:755 0x13:02

[79503.015535] [MAX975X:max96755x_init] *ERROR* done

[79503.778784] mv2112_read_status

[79503.782277] mv2112_update_link: 3.0x901(1G): 0x80

[79503.789019] mv2112_update_link: 3.0x8109(100M): 0x8

[79503.796601] mv2112_update_link: link 0x0

[79503.801395] mv2112_read_status: autoneg is disabled

[79504.832773] mv2112_read_status

[79504.836670] mv2112_update_link: 3.0x901(1G): 0x80

[79504.841897] mv2112_update_link: 3.0x8109(100M): 0x8

[79504.847828] mv2112_update_link: link 0x0

[79504.852050] mv2112_read_status: autoneg is disabled

[79504.898620] [MAX975X:mcu_keep_wakeup_work_func] *ERROR*  ERR gpio detected

[79504.960619] [MAX975X:max96755x_init] *ERROR* begin

[79505.021110] i2c_geni 980000.i2c: i2c error :-107

[79505.026029] [MAX975X:max96755g_read_byte] *ERROR* Failed to read dev:0x4c addr:0x0013

[79505.036063] i2c_geni 980000.i2c: i2c error :-107

[79505.041355] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0010 value:0x00

[79505.051893] i2c_geni 980000.i2c: i2c error :-107

[79505.056767] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0001 value:0x01

[79505.066808] i2c_geni 980000.i2c: i2c error :-107

[79505.071641] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x01ce value:0x4f

[79505.081527] i2c_geni 980000.i2c: i2c error :-107

[79505.086347] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0010 value:0x20

[79505.196821] i2c_geni 980000.i2c: i2c error :-107

[79505.201723] [MAX975X:max96755g_read_byte] *ERROR* Failed to read dev:0x4c addr:0x0013

[79505.210061] [MAX975X:max96755x_init] *ERROR* read:752 0x13:00

[79505.216811] [MAX975X:max96755x_init] *ERROR* read:755 0x13:02

[79505.222887] [MAX975X:max96755x_init] *ERROR* done

[79505.856746] mv2112_read_status

[79505.860205] mv2112_update_link: 3.0x901(1G): 0x80

[79505.865490] mv2112_update_link: 3.0x8109(100M): 0x8

[79505.870636] mv2112_update_link: link 0x0

[79505.874855] mv2112_read_status: autoneg is disabled

[79506.499760] msm_vidc:   err : ffffffff: .....: DBLP Set: status 0

[79506.880542] mv2112_read_status

[79506.883995] mv2112_update_link: 3.0x901(1G): 0x80

[79506.889453] mv2112_update_link: 3.0x8109(100M): 0x8

[79506.894793] mv2112_update_link: link 0x0

[79506.899022] mv2112_read_status: autoneg is disabled

[79507.106249] [MAX975X:mcu_keep_wakeup_work_func] *ERROR*  ERR gpio detected

[79507.168769] [MAX975X:max96755x_init] *ERROR* begin

[79507.229327] i2c_geni 980000.i2c: i2c error :-107

[79507.234360] [MAX975X:max96755g_read_byte] *ERROR* Failed to read dev:0x4c addr:0x0013

[79507.244137] i2c_geni 980000.i2c: i2c error :-107

[79507.249191] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0010 value:0x00

[79507.260289] i2c_geni 980000.i2c: i2c error :-107

[79507.265184] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0001 value:0x01

[79507.275214] i2c_geni 980000.i2c: i2c error :-107

[79507.280059] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x01ce value:0x4f

[79507.289932] i2c_geni 980000.i2c: i2c error :-107

[79507.294777] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0010 value:0x20

[79507.409673] i2c_geni 980000.i2c: i2c error :-107

[79507.414853] [MAX975X:max96755g_read_byte] *ERROR* Failed to read dev:0x4c addr:0x0013

[79507.423180] [MAX975X:max96755x_init] *ERROR* read:752 0x13:00

[79507.440981] [MAX975X:max96755x_init] *ERROR* read:755 0x13:02

[79507.451474] [MAX975X:max96755x_init] *ERROR* done

[79507.904868] mv2112_read_status

[79507.908475] mv2112_update_link: 3.0x901(1G): 0x80

[79507.913662] mv2112_update_link: 3.0x8109(100M): 0x8

[79507.928425] mv2112_update_link: link 0x0

[79507.932609] mv2112_read_status: autoneg is disabled

[79508.960757] mv2112_read_status

[79508.964169] mv2112_update_link: 3.0x901(1G): 0x80

[79508.969606] mv2112_update_link: 3.0x8109(100M): 0x8

[79508.974706] mv2112_update_link: link 0x0

[79508.978877] mv2112_read_status: autoneg is disabled

[79509.314138] [MAX975X:mcu_keep_wakeup_work_func] *ERROR*  ERR gpio detected

[79509.376548] [MAX975X:max96755x_init] *ERROR* begin

[79509.437033] i2c_geni 980000.i2c: i2c error :-107

[79509.441940] [MAX975X:max96755g_read_byte] *ERROR* Failed to read dev:0x4c addr:0x0013

[79509.453255] i2c_geni 980000.i2c: i2c error :-107

[79509.459063] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0010 value:0x00

[79509.469362] i2c_geni 980000.i2c: i2c error :-107

[79509.474211] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0001 value:0x01

[79509.484129] i2c_geni 980000.i2c: i2c error :-107

[79509.488983] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x01ce value:0x4f

[79509.498828] i2c_geni 980000.i2c: i2c error :-107

[79509.503644] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0010 value:0x20

[79509.616802] i2c_geni 980000.i2c: i2c error :-107

[79509.621716] [MAX975X:max96755g_read_byte] *ERROR* Failed to read dev:0x4c addr:0x0013

[79509.630302] [MAX975X:max96755x_init] *ERROR* read:752 0x13:00

[79509.637199] [MAX975X:max96755x_init] *ERROR* read:755 0x13:02

[79509.643277] [MAX975X:max96755x_init] *ERROR* done

[79509.984537] mv2112_read_status

[79509.988254] mv2112_update_link: 3.0x901(1G): 0x80

[79509.994154] mv2112_update_link: 3.0x8109(100M): 0x8

[79509.999709] mv2112_update_link: link 0x0

[79510.003892] mv2112_read_status: autoneg is disabled

[79511.008768] mv2112_read_status

[79511.012633] mv2112_update_link: 3.0x901(1G): 0x80

[79511.017791] mv2112_update_link: 3.0x8109(100M): 0x8

[79511.023031] mv2112_update_link: link 0x0

[79511.027180] mv2112_read_status: autoneg is disabled

[79511.522578] [MAX975X:mcu_keep_wakeup_work_func] *ERROR*  ERR gpio detected

[79511.584779] [MAX975X:max96755x_init] *ERROR* begin

[79511.645140] i2c_geni 980000.i2c: i2c error :-107

[79511.650079] [MAX975X:max96755g_read_byte] *ERROR* Failed to read dev:0x4c addr:0x0013

[79511.668314] i2c_geni 980000.i2c: i2c error :-107

[79511.673281] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0010 value:0x00

[79511.687493] i2c_geni 980000.i2c: i2c error :-107

[79511.692440] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0001 value:0x01

[79511.702777] i2c_geni 980000.i2c: i2c error :-107

[79511.707626] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x01ce value:0x4f

[79511.717817] i2c_geni 980000.i2c: i2c error :-107

[79511.722796] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0010 value:0x20

[79511.836944] i2c_geni 980000.i2c: i2c error :-107

[79511.841876] [MAX975X:max96755g_read_byte] *ERROR* Failed to read dev:0x4c addr:0x0013

[79511.850233] [MAX975X:max96755x_init] *ERROR* read:752 0x13:00

[79511.856995] [MAX975X:max96755x_init] *ERROR* read:755 0x13:02

[79511.862996] [MAX975X:max96755x_init] *ERROR* done

[79512.032793] mv2112_read_status

[79512.036546] mv2112_update_link: 3.0x901(1G): 0x80

[79512.042133] mv2112_update_link: 3.0x8109(100M): 0x8

[79512.047339] mv2112_update_link: link 0x0

[79512.051954] mv2112_read_status: autoneg is disabled

[79513.056781] mv2112_read_status

[79513.060234] mv2112_update_link: 3.0x901(1G): 0x80

[79513.065672] mv2112_update_link: 3.0x8109(100M): 0x8

[79513.070817] mv2112_update_link: link 0x0

[79513.075074] mv2112_read_status: autoneg is disabled

[79513.730443] [MAX975X:mcu_keep_wakeup_work_func] *ERROR*  ERR gpio detected

[79513.792598] [MAX975X:max96755x_init] *ERROR* begin

[79513.853379] i2c_geni 980000.i2c: i2c error :-107

[79513.858328] [MAX975X:max96755g_read_byte] *ERROR* Failed to read dev:0x4c addr:0x0013

[79513.868435] i2c_geni 980000.i2c: i2c error :-107

[79513.873432] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0010 value:0x00

[79513.884037] i2c_geni 980000.i2c: i2c error :-107

[79513.888927] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0001 value:0x01

[79513.899184] i2c_geni 980000.i2c: i2c error :-107

[79513.904127] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x01ce value:0x4f

[79513.914237] i2c_geni 980000.i2c: i2c error :-107

[79513.919079] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0010 value:0x20

[79514.033009] i2c_geni 980000.i2c: i2c error :-107

[79514.038061] [MAX975X:max96755g_read_byte] *ERROR* Failed to read dev:0x4c addr:0x0013

[79514.046405] [MAX975X:max96755x_init] *ERROR* read:752 0x13:00

[79514.053106] [MAX975X:max96755x_init] *ERROR* read:755 0x13:02

[79514.059342] [MAX975X:max96755x_init] *ERROR* done

[79514.080491] mv2112_read_status

[79514.083899] mv2112_update_link: 3.0x901(1G): 0x80

[79514.090329] mv2112_update_link: 3.0x8109(100M): 0x8

[79514.095664] mv2112_update_link: link 0x0

[79514.100187] mv2112_read_status: autoneg is disabled

[79515.104937] mv2112_read_status

[79515.108774] mv2112_update_link: 3.0x901(1G): 0x80

[79515.113977] mv2112_update_link: 3.0x8109(100M): 0x8

[79515.119191] mv2112_update_link: link 0x0

[79515.123362] mv2112_read_status: autoneg is disabled

[79515.938239] [MAX975X:mcu_keep_wakeup_work_func] *ERROR*  ERR gpio detected

[79516.000557] [MAX975X:max96755x_init] *ERROR* begin

[79516.061273] i2c_geni 980000.i2c: i2c error :-107

[79516.066305] [MAX975X:max96755g_read_byte] *ERROR* Failed to read dev:0x4c addr:0x0013

[79516.076632] i2c_geni 980000.i2c: i2c error :-107

[79516.081616] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0010 value:0x00

[79516.092264] i2c_geni 980000.i2c: i2c error :-107

[79516.097167] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0001 value:0x01

[79516.107050] i2c_geni 980000.i2c: i2c error :-107

[79516.111877] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x01ce value:0x4f

[79516.121868] i2c_geni 980000.i2c: i2c error :-107

[79516.126693] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0010 value:0x20

[79516.136134] mv2112_read_status

[79516.139542] mv2112_update_link: 3.0x901(1G): 0x80

[79516.144659] mv2112_update_link: 3.0x8109(100M): 0x8

[79516.149725] mv2112_update_link: link 0x0

[79516.153867] mv2112_read_status: autoneg is disabled

[79516.241194] i2c_geni 980000.i2c: i2c error :-107

[79516.246115] [MAX975X:max96755g_read_byte] *ERROR* Failed to read dev:0x4c addr:0x0013

[79516.254343] [MAX975X:max96755x_init] *ERROR* read:752 0x13:00

[79516.261500] [MAX975X:max96755x_init] *ERROR* read:755 0x13:02

[79516.267545] [MAX975X:max96755x_init] *ERROR* done

[79517.184795] mv2112_read_status

[79517.188190] mv2112_update_link: 3.0x901(1G): 0x80

[79517.193423] mv2112_update_link: 3.0x8109(100M): 0x8

[79517.198592] mv2112_update_link: link 0x0

[79517.202774] mv2112_read_status: autoneg is disabled

[79518.146353] [MAX975X:mcu_keep_wakeup_work_func] *ERROR*  ERR gpio detected

[79518.208555] [MAX975X:max96755x_init] *ERROR* begin

[79518.208761] mv2112_read_status

[79518.217301] mv2112_update_link: 3.0x901(1G): 0x80

[79518.222502] mv2112_update_link: 3.0x8109(100M): 0x8

[79518.227764] mv2112_update_link: link 0x0

[79518.231932] mv2112_read_status: autoneg is disabled

[79518.269420] i2c_geni 980000.i2c: i2c error :-107

[79518.274374] [MAX975X:max96755g_read_byte] *ERROR* Failed to read dev:0x4c addr:0x0013

[79518.284204] i2c_geni 980000.i2c: i2c error :-107

[79518.289098] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0010 value:0x00

[79518.299646] i2c_geni 980000.i2c: i2c error :-107

[79518.304695] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0001 value:0x01

[79518.314812] i2c_geni 980000.i2c: i2c error :-107

[79518.319679] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x01ce value:0x4f

[79518.329881] i2c_geni 980000.i2c: i2c error :-107

[79518.334710] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0010 value:0x20

[79518.448949] i2c_geni 980000.i2c: i2c error :-107

[79518.453885] [MAX975X:max96755g_read_byte] *ERROR* Failed to read dev:0x4c addr:0x0013

[79518.462226] [MAX975X:max96755x_init] *ERROR* read:752 0x13:00

[79518.469222] [MAX975X:max96755x_init] *ERROR* read:755 0x13:02

[79518.475231] [MAX975X:max96755x_init] *ERROR* done

[79519.264826] mv2112_read_status

[79519.268572] mv2112_update_link: 3.0x901(1G): 0x80

[79519.273758] mv2112_update_link: 3.0x8109(100M): 0x8

[79519.279008] mv2112_update_link: link 0x0

[79519.283159] mv2112_read_status: autoneg is disabled

[79520.288752] mv2112_read_status

[79520.292545] mv2112_update_link: 3.0x901(1G): 0x80

[79520.297766] mv2112_update_link: 3.0x8109(100M): 0x8

[79520.302983] mv2112_update_link: link 0x0

[79520.307132] mv2112_read_status: autoneg is disabled

[79520.354474] [MAX975X:mcu_keep_wakeup_work_func] *ERROR*  ERR gpio detected

[79520.416593] [MAX975X:max96755x_init] *ERROR* begin

[79520.477908] i2c_geni 980000.i2c: i2c error :-107

[79520.482845] [MAX975X:max96755g_read_byte] *ERROR* Failed to read dev:0x4c addr:0x0013

[79520.496646] i2c_geni 980000.i2c: i2c error :-107

[79520.507412] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0010 value:0x00

[79520.524538] i2c_geni 980000.i2c: i2c error :-107

[79520.529453] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0001 value:0x01

[79520.539564] i2c_geni 980000.i2c: i2c error :-107

[79520.544516] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x01ce value:0x4f

[79520.554893] i2c_geni 980000.i2c: i2c error :-107

[79520.559796] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0010 value:0x20

[79520.672987] i2c_geni 980000.i2c: i2c error :-107

[79520.677840] [MAX975X:max96755g_read_byte] *ERROR* Failed to read dev:0x4c addr:0x0013

[79520.686130] [MAX975X:max96755x_init] *ERROR* read:752 0x13:00

[79520.693121] [MAX975X:max96755x_init] *ERROR* read:755 0x13:02

[79520.699159] [MAX975X:max96755x_init] *ERROR* done

[79521.312732] mv2112_read_status

[79521.316196] mv2112_update_link: 3.0x901(1G): 0x80

[79521.329042] mv2112_update_link: 3.0x8109(100M): 0x8

[79521.340439] mv2112_update_link: link 0x0

[79521.344635] mv2112_read_status: autoneg is disabled

[79522.368755] mv2112_read_status

[79522.372180] mv2112_update_link: 3.0x901(1G): 0x80

[79522.377634] mv2112_update_link: 3.0x8109(100M): 0x8

[79522.382780] mv2112_update_link: link 0x0

[79522.387022] mv2112_read_status: autoneg is disabled

[79522.562208] [MAX975X:mcu_keep_wakeup_work_func] *ERROR*  ERR gpio detected

[79522.624551] [MAX975X:max96755x_init] *ERROR* begin

[79522.684959] i2c_geni 980000.i2c: i2c error :-107

[79522.689882] [MAX975X:max96755g_read_byte] *ERROR* Failed to read dev:0x4c addr:0x0013

[79522.699970] i2c_geni 980000.i2c: i2c error :-107

[79522.705405] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0010 value:0x00

[79522.718275] i2c_geni 980000.i2c: i2c error :-107

[79522.723138] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0001 value:0x01

[79522.733569] i2c_geni 980000.i2c: i2c error :-107

[79522.738410] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x01ce value:0x4f

[79522.748293] i2c_geni 980000.i2c: i2c error :-107

[79522.753149] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0010 value:0x20

[79522.865291] i2c_geni 980000.i2c: i2c error :-107

[79522.870220] [MAX975X:max96755g_read_byte] *ERROR* Failed to read dev:0x4c addr:0x0013

[79522.878930] [MAX975X:max96755x_init] *ERROR* read:752 0x13:00

[79522.885593] [MAX975X:max96755x_init] *ERROR* read:755 0x13:02

[79522.891954] [MAX975X:max96755x_init] *ERROR* done

[79523.392736] mv2112_read_status

[79523.396183] mv2112_update_link: 3.0x901(1G): 0x80

[79523.401639] mv2112_update_link: 3.0x8109(100M): 0x8

[79523.406777] mv2112_update_link: link 0x0

[79523.410989] mv2112_read_status: autoneg is disabled

[79524.416580] mv2112_read_status

[79524.419998] mv2112_update_link: 3.0x901(1G): 0x80

[79524.425445] mv2112_update_link: 3.0x8109(100M): 0x8

[79524.430571] mv2112_update_link: link 0x0

[79524.434792] mv2112_read_status: autoneg is disabled

[79524.770844] [MAX975X:mcu_keep_wakeup_work_func] *ERROR*  ERR gpio detected

[79524.832581] [MAX975X:max96755x_init] *ERROR* begin

[79524.893111] i2c_geni 980000.i2c: i2c error :-107

[79524.898054] [MAX975X:max96755g_read_byte] *ERROR* Failed to read dev:0x4c addr:0x0013

[79524.916593] i2c_geni 980000.i2c: i2c error :-107

[79524.923362] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0010 value:0x00

[79524.934298] i2c_geni 980000.i2c: i2c error :-107

[79524.939142] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0001 value:0x01

[79524.949099] i2c_geni 980000.i2c: i2c error :-107

[79524.953918] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x01ce value:0x4f

[79524.963802] i2c_geni 980000.i2c: i2c error :-107

[79524.968668] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0010 value:0x20

[79525.080795] i2c_geni 980000.i2c: i2c error :-107

[79525.085672] [MAX975X:max96755g_read_byte] *ERROR* Failed to read dev:0x4c addr:0x0013

[79525.093889] [MAX975X:max96755x_init] *ERROR* read:752 0x13:00

[79525.100307] [MAX975X:max96755x_init] *ERROR* read:755 0x13:02

[79525.106561] [MAX975X:max96755x_init] *ERROR* done

[79525.440740] mv2112_read_status

[79525.444151] mv2112_update_link: 3.0x901(1G): 0x80

[79525.449515] mv2112_update_link: 3.0x8109(100M): 0x8

[79525.454693] mv2112_update_link: link 0x0

[79525.459004] mv2112_read_status: autoneg is disabled

[79526.464741] mv2112_read_status

[79526.468174] mv2112_update_link: 3.0x901(1G): 0x80

[79526.473528] mv2112_update_link: 3.0x8109(100M): 0x8

[79526.478619] mv2112_update_link: link 0x0

[79526.482760] mv2112_read_status: autoneg is disabled

[79526.978244] [MAX975X:mcu_keep_wakeup_work_func] *ERROR*  ERR gpio detected

[79527.040779] [MAX975X:max96755x_init] *ERROR* begin

[79527.101617] i2c_geni 980000.i2c: i2c error :-107

[79527.106545] [MAX975X:max96755g_read_byte] *ERROR* Failed to read dev:0x4c addr:0x0013

[79527.117178] i2c_geni 980000.i2c: i2c error :-107

[79527.123195] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0010 value:0x00

[79527.134100] i2c_geni 980000.i2c: i2c error :-107

[79527.138954] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0001 value:0x01

[79527.149139] i2c_geni 980000.i2c: i2c error :-107

[79527.153968] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x01ce value:0x4f

[79527.164138] i2c_geni 980000.i2c: i2c error :-107

[79527.168950] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0010 value:0x20

[79527.280800] i2c_geni 980000.i2c: i2c error :-107

[79527.285735] [MAX975X:max96755g_read_byte] *ERROR* Failed to read dev:0x4c addr:0x0013

[79527.293945] [MAX975X:max96755x_init] *ERROR* read:752 0x13:00

[79527.300410] [MAX975X:max96755x_init] *ERROR* read:755 0x13:02

[79527.306430] [MAX975X:max96755x_init] *ERROR* done

[79527.488542] mv2112_read_status

[79527.491992] mv2112_update_link: 3.0x901(1G): 0x80

[79527.497500] mv2112_update_link: 3.0x8109(100M): 0x8

[79527.502656] mv2112_update_link: link 0x0

[79527.506819] mv2112_read_status: autoneg is disabled

[79528.148380] logd: logdr: UID=0 GID=0 PID=26278 b tail=0 logMask=bf pid=0 start=0ns deadline=0ns

[79528.512460] mv2112_read_status

[79528.515893] mv2112_update_link: 3.0x901(1G): 0x80

[79528.521085] mv2112_update_link: 3.0x8109(100M): 0x8

[79528.533679] mv2112_update_link: link 0x0

[79528.537805] mv2112_read_status: autoneg is disabled

[79529.186314] [MAX975X:mcu_keep_wakeup_work_func] *ERROR*  ERR gpio detected

[79529.248795] [MAX975X:max96755x_init] *ERROR* begin

[79529.309191] i2c_geni 980000.i2c: i2c error :-107

[79529.314376] [MAX975X:max96755g_read_byte] *ERROR* Failed to read dev:0x4c addr:0x0013

[79529.326144] i2c_geni 980000.i2c: i2c error :-107

[79529.331177] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0010 value:0x00

[79529.342604] i2c_geni 980000.i2c: i2c error :-107

[79529.347508] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0001 value:0x01

[79529.357640] i2c_geni 980000.i2c: i2c error :-107

[79529.362772] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x01ce value:0x4f

[79529.372690] i2c_geni 980000.i2c: i2c error :-107

[79529.377561] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0010 value:0x20

[79529.489274] i2c_geni 980000.i2c: i2c error :-107

[79529.494140] [MAX975X:max96755g_read_byte] *ERROR* Failed to read dev:0x4c addr:0x0013

[79529.502730] [MAX975X:max96755x_init] *ERROR* read:752 0x13:00

[79529.509637] [MAX975X:max96755x_init] *ERROR* read:755 0x13:02

[79529.515703] [MAX975X:max96755x_init] *ERROR* done

[79529.568749] mv2112_read_status

[79529.572553] mv2112_update_link: 3.0x901(1G): 0x80

[79529.582523] mv2112_update_link: 3.0x8109(100M): 0x8

[79529.588497] mv2112_update_link: link 0x0

[79529.592664] mv2112_read_status: autoneg is disabled

[79530.624724] mv2112_read_status

[79530.628179] mv2112_update_link: 3.0x901(1G): 0x80

[79530.633658] mv2112_update_link: 3.0x8109(100M): 0x8

[79530.638785] mv2112_update_link: link 0x0

[79530.643175] mv2112_read_status: autoneg is disabled

[79531.394287] [MAX975X:mcu_keep_wakeup_work_func] *ERROR*  ERR gpio detected

[79531.456529] [MAX975X:max96755x_init] *ERROR* begin

[79531.517057] i2c_geni 980000.i2c: i2c error :-107

[79531.521983] [MAX975X:max96755g_read_byte] *ERROR* Failed to read dev:0x4c addr:0x0013

[79531.531431] i2c_geni 980000.i2c: i2c error :-107

[79531.540840] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0010 value:0x00

[79531.551303] i2c_geni 980000.i2c: i2c error :-107

[79531.556241] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0001 value:0x01

[79531.566266] i2c_geni 980000.i2c: i2c error :-107

[79531.571172] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x01ce value:0x4f

[79531.581182] i2c_geni 980000.i2c: i2c error :-107

[79531.586078] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0010 value:0x20

[79531.648744] mv2112_read_status

[79531.652195] mv2112_update_link: 3.0x901(1G): 0x80

[79531.657767] mv2112_update_link: 3.0x8109(100M): 0x8

[79531.676461] mv2112_update_link: link 0x0

[79531.680633] mv2112_read_status: autoneg is disabled

[79531.696725] i2c_geni 980000.i2c: i2c error :-107

[79531.701762] [MAX975X:max96755g_read_byte] *ERROR* Failed to read dev:0x4c addr:0x0013

[79531.710480] [MAX975X:max96755x_init] *ERROR* read:752 0x13:00

[79531.717336] [MAX975X:max96755x_init] *ERROR* read:755 0x13:02

[79531.723593] [MAX975X:max96755x_init] *ERROR* done

[79532.704755] mv2112_read_status

[79532.708618] mv2112_update_link: 3.0x901(1G): 0x80

[79532.714099] mv2112_update_link: 3.0x8109(100M): 0x8

[79532.719330] mv2112_update_link: link 0x0

[79532.723505] mv2112_read_status: autoneg is disabled

[79533.602493] [MAX975X:mcu_keep_wakeup_work_func] *ERROR*  ERR gpio detected

[79533.664781] [MAX975X:max96755x_init] *ERROR* begin

[79533.726140] i2c_geni 980000.i2c: i2c error :-107

[79533.731465] [MAX975X:max96755g_read_byte] *ERROR* Failed to read dev:0x4c addr:0x0013

[79533.731733] mv2112_read_status

[79533.741309] i2c_geni 980000.i2c: i2c error :-107

[79533.748263] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0010 value:0x00

[79533.750340] mv2112_update_link: 3.0x901(1G): 0x80

[79533.758939] i2c_geni 980000.i2c: i2c error :-107

[79533.763584] mv2112_update_link: 3.0x8109(100M): 0x8

[79533.767633] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0001 value:0x01

[79533.772435] mv2112_update_link: link 0x0

[79533.782363] i2c_geni 980000.i2c: i2c error :-107

[79533.785895] mv2112_read_status: autoneg is disabled

[79533.795943] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x01ce value:0x4f

[79533.806390] i2c_geni 980000.i2c: i2c error :-107

[79533.811264] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0010 value:0x20

[79533.925329] i2c_geni 980000.i2c: i2c error :-107

[79533.930357] [MAX975X:max96755g_read_byte] *ERROR* Failed to read dev:0x4c addr:0x0013

[79533.938729] [MAX975X:max96755x_init] *ERROR* read:752 0x13:00

[79533.945623] [MAX975X:max96755x_init] *ERROR* read:755 0x13:02

[79533.951771] [MAX975X:max96755x_init] *ERROR* done

[79534.784759] mv2112_read_status

[79534.788211] mv2112_update_link: 3.0x901(1G): 0x80

[79534.793751] mv2112_update_link: 3.0x8109(100M): 0x8

[79534.798980] mv2112_update_link: link 0x0

[79534.803273] mv2112_read_status: autoneg is disabled

[79535.806005] init: Received sys.powerctl='reboot,edl' from pid: 26281 (/system/bin/reboot)

[79535.808421] mv2112_read_status

[79535.814757] init: sys.powerctl: do_shutdown: 0 IsShuttingDown: 0

[79535.818461] mv2112_update_link: 3.0x901(1G): 0x80

[79535.824554] init: Got shutdown_command 'reboot,edl' Calling HandlePowerctlMessage()

[79535.829409] mv2112_update_link: 3.0x8109(100M): 0x8

[79535.841900] mv2112_update_link: link 0x0

[79535.842668] [MAX975X:mcu_keep_wakeup_work_func] *ERROR*  ERR gpio detected

[79535.844040] init: Clear action queue and start shutdown trigger

[79535.844181] init: Entering shutdown mode

[79535.846261] mv2112_read_status: autoneg is disabled

[79535.847081] init: processing action (shutdown_done) from (<Builtin Action>:0)

[79535.847135] init: Reboot start, reason: reboot,edl, reboot_target: edl

[79535.847172] init: Shutdown timeout: 6000 ms

[79535.847198] init: Create reboot monitor thread.

[79535.847630] init: shutdown_timeout_timespec.tv_sec: 79841

[79535.908676] [MAX975X:max96755x_init] *ERROR* begin

[79535.976275] i2c_geni 980000.i2c: i2c error :-107

[79535.981332] [MAX975X:max96755g_read_byte] *ERROR* Failed to read dev:0x4c addr:0x0013

[79535.989264] binder: 26284:26284 ioctl 40046210 7ffa076234 returned -22

[79535.990703] i2c_geni 980000.i2c: i2c error :-107

[79536.001170] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0010 value:0x00

[79536.014021] i2c_geni 980000.i2c: i2c error :-107

[79536.018839] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0001 value:0x01

[79536.019774] i2c_geni 980000.i2c: i2c error :-107

[79536.035384] logd: SocketClient: write error (Broken pipe)

[79536.035622] i2c_geni 980000.i2c: i2c error :-107

[79536.038834] [MAX975X:max96755g_write_8bit_byte] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x01

[79536.038853] [drm:dsi_display_set_backlight] *ERROR* [msm-dsi-error]: unable to set backlight

[79536.064352] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x01ce value:0x4f

[79536.074442] i2c_geni 980000.i2c: i2c error :-107

[79536.079220] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0010 value:0x20

[79536.096520] spcom:handle_poll: interrupted wait retval=0

[79536.193036] i2c_geni 980000.i2c: i2c error :-107

[79536.197842] [MAX975X:max96755g_read_byte] *ERROR* Failed to read dev:0x4c addr:0x0013

[79536.206027] [MAX975X:max96755x_init] *ERROR* read:752 0x13:00

[79536.212259] [MAX975X:max96755x_init] *ERROR* read:755 0x13:02

[79536.218216] [MAX975X:max96755x_init] *ERROR* done

[79536.223751] bt_ioctl: BT_CMD_PWR_CTRL pwr_cntrl:0

[79536.313622] msm_vidc:   err : 00000001: h264e: State not recognized

[79536.314402] QSEECOM: __qseecom_unload_app: App (5) is unloaded

[79536.321240] msm_vidc:   err : 00000001: h264e: Failed to move from state: 16 to 13

[79536.334156] msm_vidc:   err : 00000001: h264e: msm_comm_kill_session: no session to kill for inst ffffffcede9c0000

[79536.338450] bt_configure_gpios: BT-OFF:bt-reset-gpio(1121) value(0)

[79536.338450]

[79536.347121] msm_vidc:   err : 00000001: h264e: Failed to move inst: ffffffcede9c0000 to state 13

[79536.353769] bt_configure_gpios: BT-OFF:bt-sw-ctrl-gpio(1224) value(0)

[79536.363929] msm_vidc:   err : 00000001: h264e: Failed STOP Streaming inst = ffffffcede9c0000 on cap = 9

[79536.368492] bt_configure_gpios: bt_gpio= 1121 on: 0 is successful

[79536.368576] bt_vreg_disable: vreg_disable successful for : qca,bt-vdd-asd

[79536.378704] msm_vidc:   high: 00000001: h264e: Closed video instance: ffffffcede9c0000

[79536.384492] bt_vreg_disable: vreg_disable successful for : qca,bt-vdd-rfa2

[79536.408414] bt_vreg_disable: vreg_disable successful for : qca,bt-vdd-rfa1

[79536.412570] QSEECOM: __qseecom_unload_app: App (4) is unloaded

[79536.415564] bt_vreg_disable: vreg_disable successful for : qca,bt-vdd-dig

[79536.428745] bt_vreg_disable: vreg_disable successful for : qca,bt-vdd-aon

[79536.495154] smcinvoke: process_tzcb_req: sever is either invalid or defunct

[79536.502797] smcinvoke: process_tzcb_req: server invalid, res: -90

[79536.510691] smcinvoke: process_tzcb_req: sever is either invalid or defunct

[79536.517888] smcinvoke: process_tzcb_req: server invalid, res: -90

[79536.591080] [MAX975X:max96755x_drm_notifier_callback] *ERROR* receives EARLY_BLANK:POWERDOWN

[79536.600886] i2c_geni 980000.i2c: i2c error :-107

[79536.605837] [MAX975X:max96755g_write_8bit_byte] *ERROR* Failed to write dev:0x15 addr:0x20 value:0x01

[79536.606911] [MAX975X:mcu_keep_wakeup_work_func] *ERROR*  ERR gpio detected

[79536.615606] [drm:dsi_display_set_backlight] *ERROR* [msm-dsi-error]: unable to set backlight

[79536.640665] [MAX975X:max96755x_drm_notifier_callback] *ERROR* receives BLANK:POWERDOWN

[79536.681044] [MAX975X:max96755x_init] *ERROR* begin

[79536.744696] i2c_geni 980000.i2c: i2c error :-107

[79536.749604] [MAX975X:max96755g_read_byte] *ERROR* Failed to read dev:0x4c addr:0x0013

[79536.770217] i2c_geni 980000.i2c: i2c error :-107

[79536.775362] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0010 value:0x00

[79536.786723] i2c_geni 980000.i2c: i2c error :-107

[79536.791543] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0001 value:0x01

[79536.801216] i2c_geni 980000.i2c: i2c error :-107

[79536.805994] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x01ce value:0x4f

[79536.820599] i2c_geni 980000.i2c: i2c error :-107

[79536.825392] [MAX975X:max96755g_write_byte] *ERROR* Failed to write dev:0x4c addr:0x0010 value:0x20

[79536.900583] mv2112_read_status

[79536.904254] mv2112_update_link: 3.0x901(1G): 0x80

[79536.909684] mv2112_update_link: 3.0x8109(100M): 0x8

[79536.915015] mv2112_update_link: link 0x0

[79536.936233] mv2112_read_status: autoneg is disabled

[79536.939433] i2c_geni 980000.i2c: i2c error :-107

[79536.946182] [MAX975X:max96755g_read_byte] *ERROR* Failed to read dev:0x4c addr:0x0013

[79536.954414] [MAX975X:max96755x_init] *ERROR* read:752 0x13:00

[79536.962217] [MAX975X:max96755x_init] *ERROR* read:755 0x13:02

[79536.968149] [MAX975X:max96755x_init] *ERROR* done

[79537.827963] msm_vidc:   err : ffffffff: .....: DBLP Set: status 0

[79537.952459] mv2112_read_status

[79537.955903] mv2112_update_link: 3.0x901(1G): 0x80

[79537.962758] mv2112_update_link: 3.0x8109(100M): 0x8

[79537.968573] mv2112_update_link: link 0x0

[79537.972738] mv2112_read_status: autoneg is disabled

[79538.007304] cnss-daemon: terminate: 1Could not terminate loop in 2 seconds! Some bug???

[79538.007966] type=1400 audit(1667402497.163:8285): avc: denied { kill } for comm="swapper/1" capability=5 scontext=u:r:kernel:s0 tcontext=u:r:kernel:s0 tclass=capability permissive=0

[79538.048012] cnss-daemon: 13 output lines suppressed due to ratelimiting

[79538.153210] binder: 26307:26307 ioctl 40046210 7ff6271574 returned -22

[79538.160095] ProcessState: Binder ioctl to enable oneway spam detection failed: Invalid argument

[79538.174031] vdc: Waited 0ms for vold

[79538.182389] type=1400 audit(1667402497.339:8286): avc: denied { kill } for comm="vdc" capability=5 scontext=u:r:vdc:s0 tcontext=u:r:vdc:s0 tclass=capability permissive=0

[79538.252574] binder: 26309:26309 ioctl 40046210 7fe183de14 returned -22

[79538.259417] ProcessState: Binder ioctl to enable oneway spam detection failed: Invalid argument

[79538.273558] vdc: Waited 0ms for vold

[79538.277403] binder: 548:548 transaction failed 29189/-22, size 100-0 line 3071

[79538.475452] type=1400 audit(1667402497.631:8287): avc: denied { kill } for comm="vdc" capability=5 scontext=u:r:vdc:s0 tcontext=u:r:vdc:s0 tclass=capability permissive=0

[79538.512474] Binder:548_2: 11 output lines suppressed due to ratelimiting

Format: Log Type - Time(microsec) - Message - Optional Info

Log Type: B - Since Boot(Power On Reset),  D - Delta,  S - Statistic

S - QC_IMAGE_VERSION_STRING=BOOT.XF.3.2-00313-SM8250-1

S - IMAGE_VARIANT_STRING=Soc8250LAA

S - OEM_IMAGE_VERSION_STRING=b43c41882aaa

S - Boot Interface: UFS

S - Secure Boot: Off

S - Boot Config @ 0x00786070 = 0x00000001

S - JTAG ID @ 0x00786130 = 0x001560e1

S - OEM ID @ 0x00786138 = 0x00000000

S - Serial Number @ 0x00786134 = 0xdf4ff488

S - OEM Config Row 0 @ 0x007841e0 = 0x0000000000000000

S - OEM Config Row 1 @ 0x007841e8 = 0x0000000000000000

S - Feature Config Row 0 @ 0x007841f8 = 0x0040200000000400

S - Feature Config Row 1 @ 0x00784200 = 0xc000000000000000

S - Core 0 Frequency, 1516 MHz

S - PBL Patch Ver: 5

S - PBL freq: 600 MHZ

D -      6208 - pbl_apps_init_timestamp

D -     37077 - bootable_media_detect_timestamp

D -       913 - bl_elf_metadata_loading_timestamp

D -       711 - bl_hash_seg_auth_timestamp

D -      5951 - bl_elf_loadable_segment_loading_timestamp

D -      5426 - bl_elf_segs_hash_verify_timestamp

D -      7008 - bl_sec_hash_seg_auth_timestamp

D -       817 - bl_sec_segs_hash_verify_timestamp

D -        33 - pbl_populate_shared_data_and_exit_timestamp

S -     64144 - PBL, End

B -     77927 - SBL1, Start

B -    193156 - SBL1 BUILD @ 00:55:40 on Nov  2 2022

B -    197304 - usb: usb_shared_hs_phy_init: hs phy cfg size , 0xc

D -     10614 - sbl1_hw_init

D -        30 - boot_flash_init

B -    271389 - UFS INQUIRY ID: SKhynix HN8T05BZGKX015  A043

B -    273859 - UFS Boot LUN: 1

D -       885 - Auth Metadata

D -     78324 - sbl1_xblconfig_init

D -         0 - boot_config_data_table_default_init

D -        30 - boot_config_data_table_init

B -    297558 - CDT Version:3,Platform ID:8,Major ID:1,Minor ID:0,Subtype:0

D -     17355 - sbl1_hw_platform_pre_ddr

D -         0 - devcfg init

B -    326167 - PM: PM 0=0x4000028000000042:0x40

B -    326258 - PM: PM 2=0x4000018000000020:0x800

B -    330833 - PM: PM 5=0x400000000000000:0x0

B -    335469 - PM: POWER ON by CBLPWR, POWER OFF due to FAULT UVLO

B -    347456 - PM: PMA_2 PON:CBL WR:PS ON:WARM POFF:PS OFF:POFF FAULT1:UVLO

B -    353190 - PM: PMA_3 PON:CBL ON:PON POFF:PS OFF:POFF FAULT1:UVLO

B -    440816 - PM: SET_VAL:Skip

B -    441182 - PM: PSI: b0x00_v0x53

B -    447008 - PM: Device Init # SPMI Transn: 3916

B -    454541 - PM: OCP Occured: PMIC: 0; LDO: 6

B -    455334 - PM: Driver Init # SPMI Transn: 494

D -    140452 - pmic XBL init

D -     29585 - vsense_railway_cpr init

D -    178456 - sbl1_hw_pre_ddr_init

D -         0 - boot_dload_handle_forced_dload_timeout

D -      1464 - sbl1_load_ddr_training_data

D -      5093 - sbl1_ddr_set_params

B -    526094 - eCDT MRR - Data Starting Address: 0x09066D00

B -    527436 - DSF version = 156.8.14

B -    531737 - Manufacturer ID = 6, Device Type = 8

B -    535336 - Rank 0 size = 4096 MB, Rank 1 size = 4096 MB

D -     30988 - sbl1_ddr_init

D -         0 - boot_pre_ddi_entry

B -    548451 - do_ddr_training, Start

B -    578890 - DDR: Start of DDR Training Restore

B -    588314 - Frequency = 1805 MHz

B -    588314 - DDR: End of DDR Training Restore

D -     40168 - do_ddr_training, Delta

D -     47793 - sbl1_do_ddr_training

D -         0 - sbl1_hand_control_to_devprog_ddr

D -      1006 - boot_ddi_entry

B -    607651 - Pimem init cmd, entry

D -     10736 - Pimem init cmd, exit

D -     13908 - sbl1_post_ddr_init

D -         0 - sbl1_hw_init_secondary

B -    628086 - APDP Image Load, Start

D -       854 - Auth Metadata

D -       397 - Segments hash check

D -      9730 - APDP Image Loaded, Delta - (8204 Bytes)

D -         0 - boot_dload_dump_security_regions

B -    646264 - usb: UFS Serial - 117d7610

B -    650717 - usb: fedl, vbus_det_err

D -      8418 - boot_dload_check

D -         0 - boot_cache_set_memory_barrier

D -         0 - boot_smem_debug_init

D -       366 - boot_smem_init

D -        30 - boot_smem_alloc_for_minidump

B -    671884 - PM: SMEM Chgr Info Write Success

D -      4117 - boot_smem_store_pon_status

D -        31 - sbl1_hw_platform_smem

D -        91 - boot_ddr_share_data_to_aop

D -       549 - boot_clock_init_rpm

D -         0 - boot_vsense_copy_to_smem

D -         0 - boot_share_flash_data

D -         0 - boot_populate_ram_partition_table

D -        61 - boot_populate_ddr_details_shared_table

D -        31 - sbl1_tlmm_init

D -         0 - sbl1_efs_handle_cookies

D -         0 - boot_apt_test

B -    718580 - OEM_MISC Image Load, Start

D -       793 - Auth Metadata

D -       275 - Segments hash check

D -      9302 - OEM_MISC Image Loaded, Delta - (8136 Bytes)

B -    731268 - QTI_MISC Image Load, Start

D -      5368 - QTI_MISC Image Loaded, Delta - (0 Bytes)

B -    747921 - PM: PM Total Mem Allocated: 2320

D -      7381 - sbl1_pm_aop_pre_init_wrapper

B -    752496 - AOP Image Load, Start

D -       885 - Auth Metadata

D -      1921 - Segments hash check

D -     13359 - AOP Image Loaded, Delta - (198304 Bytes)

B -    769149 - QSEE Dev Config Image Load, Start

D -       793 - Auth Metadata

D -       580 - Segments hash check

D -     12505 - QSEE Dev Config Image Loaded, Delta - (45276 Bytes)

B -    790682 - QSEE Image Load, Start

D -      4362 - Auth Metadata

D -     20222 - Segments hash check

D -     66276 - QSEE Image Loaded, Delta - (3146293 Bytes)

D -         0 - sbl1_hw_play_vibr

B -    865834 - SEC Image Load, Start

D -      2928 - SEC Image Loaded, Delta - (0 Bytes)

B -    872239 - CPUCPFW Image Load, Start

D -      4758 - CPUCPFW Image Loaded, Delta - (0 Bytes)

B -    880840 - QHEE Image Load, Start

D -       823 - Auth Metadata

D -      2958 - Segments hash check

D -     12932 - QHEE Image Loaded, Delta - (444216 Bytes)

B -    897066 - OEM_HYP Image Load, Start

D -      5276 - OEM_HYP Image Loaded, Delta - (0 Bytes)

B -    906185 - STI Image Load, Start

D -      5094 - STI Image Loaded, Delta - (0 Bytes)

B -    915305 - APPSBL Image Load, Start

D -       915 - Auth Metadata

D -     12993 - Segments hash check

D -     23851 - APPSBL Image Loaded, Delta - (2506752 Bytes)

D -        30 - sbl1_appsbl_arch_determination

B -    948214 - SBL1, End

D -    874344 - SBL1, Delta

S - Flash Throughput, 242000 KB/s  (6441429 Bytes,  26515 us)

S - DDR Frequency, 1555 MHz

UEFI Start     [ 1167]

 - 0x09FC01000 [ 1171] Sec.efi

ASLR        : ON

DEP         : ON (RTB)

Timer Delta : +1 mS

RAM Entry 0 : Base 0x080000000  Size 0x03B800000

RAM Entry 1 : Base 0x180000000  Size 0x100000000

RAM Entry 2 : Base 0x0C0000000  Size 0x0C0000000

Total RAM   : 0x1FB800000

UEFI Ver    : 5.0.221102.BOOT.XF.3.2-00313-SM8250-1

Build Info  : 64b Nov  2 2022 00:56:29

Boot Device : UFS

PROD Mode   : TRUE

Retail      : FALSE

EFI_GetBoardId: Failed to load GPIO or TLMM Protocol! Status = Not Found

EFI_GetBoardId: Failed to load GPIO or TLMM Protocol! Status = Not Found

PM0: 30, PM2: 31, PM3: 33, PM5: 36,

UFS INQUIRY ID: SKhynix HN8T05BZGKX015  A043

UFS Boot LUN: 1

HW Wdog Setting from PCD : Disabled

DisplayUtils: no string from fastboot, set Panel override command as none

DisplayDxe: Resolution 640x480 (1 intf)

SPSSDxe:: SPSSDxe_PreLoadChecks SPSS loading in UEFI not supported for this chipID = 481

UsbPwrCtrlLibConfig_Init_NOPMIC use no pmic config

UsbConfigLibOpenProtocols: PMI version (0x0)

UsbConfigInit: UsbConfigInit, not start on port: 0, mode 0

UsbConfigInit: UsbConfigInit, not start on port: 1, mode 0

UsbConfigPortsQueryConnectionChange: VbusStatus: 1

UsbConfigPortsQueryConnectionChange: usbport->connectstate: ATT

ERROR:  Failed to get Battery Presence: Device Error

APC1 IDDQ WC 0 , L2:0, CPU[0]:175, CPU[1]:175, CPU[2]:175, CPU[3]:175

 APC1 Total 700

LoadSys  TIME 0ms

tsens  TIME 1ms

scm  TIME 2ms

Load CPU 0 Slp: 0x57, Int: 0x102

Load CPU 1 Slp: 0xE0, Int: 0xFFFFFF65

Load CPU 2 Slp: 0x97, Int: 0xFFFFFFC5

Load CPU 3 Slp: 0x107, Int: 0xFFFFFFB1

Load GPU 0 Slp: 0xA1, Int: 0x2D adc_min:0x187 adc_max:0x17E

Load NPU 0 Slp: 0x2D, Int: 0x24

LmhIsenseInit Pre CPU  TIME 0ms

GLD IDDQ WC 0

LmhIsenseSubSysEntry Post SubSysEntryCb  TIME 0ms

LmhIsenseSubSysEntry Post LmhIsenseSubSysInit  TIME 0ms

LmhIsenseInitSubSys Post SubSysEntry  TIME 0ms

LmhIsenseInitSubSys Post SubSysTrim  TIME 0ms

LmhIsenseInitSubSys Post SubSysExit  TIME 0ms

LmhIsenseInit Post CPU  TIME 0ms

GPU IDDQ 53

LmhIsenseSubSysEntry Post SubSysEntryCb  TIME 0ms

LmhIsenseSubSysEntry Post LmhIsenseSubSysInit  TIME 0ms

LmhIsenseInitSubSys Post SubSysEntry  TIME 0ms

LmhIsenseInitSubSys Post SubSysTrim  TIME 0ms

LmhIsenseInitSubSys Post SubSysExit  TIME 1ms

LmhIsenseInit Post GPU  TIME 2ms

Entering in func1 of NPU  TIME 2ms

NPU IDDQ 61

LmhIsenseSubSysEntry Post SubSysEntryCb  TIME 0ms

LmhIsenseSubSysEntry Post LmhIsenseSubSysInit  TIME 0ms

LmhIsenseInitSubSys Post SubSysEntry  TIME 0ms

LmhIsenseInitSubSys Post SubSysTrim  TIME 0ms

LmhIsenseInitSubSys Post SubSysExit  TIME 0ms

LmhIsenseInit Post NPU  TIME 2ms

isense  TIME 5ms

ISENSE TOTAL TIME 5ms

Disp init wait [ 1652]

-----------------------------

Platform Init  [ 1670] BDS

UEFI Ver   : 5.0.221102.BOOT.XF.3.2-00313-SM8250-1

Platform           : MTP

Chip Name          : QCS8250

Chip Ver           : 2.1

Chip Serial Number : 0xDF4FF488

Silver cluster Core 0 Freq: 1516 MHz

-----------------------------

QcomChargerApp:: QcomChargerApp_Entry Can not locate Charger Protocol = Not Found

Failed to launch default charger app, status: Device Error

UEFI Total : 528 ms

POST Time      [ 1695] OS Loader

Loader Build Info: Nov  2 2022 02:06:31

VB: Non-secure device: Security State: (0xF7F)

VB: RWDeviceState: Succeed using devinfo!

Total DDR Size: 0x00000001FB800000

KeyPress:258, BootReason:0

Fastboot=0, Recovery:0

GetVmData: No Vm data present! Status = (0x3)

VM Hyp calls not present

Booting from slot (_a)

Booting Into Mission Mode

Loading Image Start : 1716 ms

Loading Image Done : 1717 ms

Total Image Read size : 4096 Bytes

Invalid vendor_boot partition. Skipping

Load Image vbmeta_a total time: 1 ms

Load Image vbmeta_system_a total time: 0 ms

Load Image boot_a total time: 102 ms

Load Image dtbo_a total time: 26 ms

VB2: Authenticate complete! boot state is: orange

VB2: boot state: orange(1)

Failed to get the graphics output protocol.

Failed to get the graphics output protocol.

Failed to get width or height

Failed to get the graphics output protocol.

Failed to get the graphics output protocol.

Unable to show verified menu on screen: Out of Resources

Device is unlocked, Skipping boot verification

tsnv magic=0x564E5354

Memory Base Address: 0x80000000

Override DTB: GetBlkIOHandles failed loading user_dtbo!

Apply Overlay total time: 313 ms

Error getting off mode charging info: Device Error

VB: Non-secure device: Security State: (0xF7F)

VB: RWDeviceState: Succeed using devinfo!

TSNV: find node for id=21

TSNV: find node for id=11

Cmdline: console=ttyMSM0,115200n8 androidboot.hardware=qcom androidboot.console=ttyMSM0 androidboot.memcg=1 lpm_levels.sleep_disabled=1 video=vfb:640x400,bpp=32,memsize=3072000 msm_rtb.filter=0x237 service_locator.enable=1 androidboot.usbcontroller=a600000.dwc3 swiotlb=2048 loop.max_part=7 cgroup.memory=nokmem,nosocket reboot=panic_warm buildvariant=userdebug androidboot.verifiedbootstate=orange androidboot.keymaster=1 androidboot.vbmeta.device=PARTUUID=e5f65754-8a35-603c-79c1-cd1d561a12d6 androidboot.vbmeta.avb_version=1.0 androidboot.vbmeta.device_state=unlocked androidboot.vbmeta.hash_alg=sha256 androidboot.vbmeta.size=7552 androidboot.vbmeta.digest=e8751064a653bff6a1f538baf44b85f92cc1a1766c60bee3f15b44e477559c39 androidboot.vbmeta.invalidate_on_error=yes andro

RAM Partitions

Add Base: 0x0000000080000000 Available Length: 0x000000003B800000

Add Base: 0x0000000180000000 Available Length: 0x0000000100000000

Add Base: 0x00000000C0000000 Available Length: 0x00000000C0000000

ERROR: Could not get splash memory region node

TSNV: find node for id=22

Update Device Tree total time: 44 ms

Shutting Down UEFI Boot Services: 2402 ms

Start EBS        [ 2402]

App Log Flush : 74 ms

Exit EBS        [ 2495] UEFI End

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x51df805e]

[    0.000000] Linux version 4.19.157+ (scm@b43c41882aaa) (clang version 10.0.7 for Android NDK, GNU ld (binutils-2.27-bd24d23f) 2.27.0.20170315) #1 SMP PREEMPT Wed Nov 2 02:23:05 CST 2022

[    0.000000] Machine model: Qualcomm Technologies, Inc. kona MTP-RmPM8150b. VX1(MCE) EVT2

[    0.000000] efi: Getting EFI parameters from FDT:

[    0.000000] efi: UEFI not found.

[    0.000000] Memory limit set/overridden to 6072MB

[    0.000000] OF: reserved mem: OVERLAP DETECTED!

[    0.000000] disp_rdump_region@9c000000 (0x000000009c000000--0x000000009c800000) overlaps with cont_splash_region@9c000000 (0x000000009c000000--0x000000009e300000)

[    0.000000] Reserved memory: created CMA memory pool at 0x00000000fec00000, size 16 MiB

[    0.000000] OF: reserved mem: initialized node user_contig_region, compatible id shared-dma-pool

[    0.000000] Reserved memory: created CMA memory pool at 0x00000000fcc00000, size 32 MiB

[    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool

[    0.000000] Reserved memory: created CMA memory pool at 0x00000000fbc00000, size 16 MiB

[    0.000000] OF: reserved mem: initialized node qseecom_ta_region, compatible id shared-dma-pool

[    0.000000] Reserved memory: created CMA memory pool at 0x00000000f1800000, size 164 MiB

[    0.000000] OF: reserved mem: initialized node secure_display_region, compatible id shared-dma-pool

[    0.000000] Reserved memory: created CMA memory pool at 0x00000000f0400000, size 20 MiB

[    0.000000] OF: reserved mem: initialized node cnss_wlan_region, compatible id shared-dma-pool

[    0.000000] Reserved memory: created CMA memory pool at 0x00000000edc00000, size 40 MiB

[    0.000000] OF: reserved mem: initialized node mem_dump_region, compatible id shared-dma-pool

[    0.000000] Reserved memory: created CMA memory pool at 0x00000000ecc00000, size 16 MiB

[    0.000000] OF: reserved mem: initialized node sp_region, compatible id shared-dma-pool

[    0.000000] Reserved memory: created CMA memory pool at 0x00000000ec800000, size 4 MiB

[    0.000000] OF: reserved mem: initialized node cdsp_region, compatible id shared-dma-pool

[    0.000000] Reserved memory: created CMA memory pool at 0x00000000eb400000, size 20 MiB

[    0.000000] OF: reserved mem: initialized node qseecom_region, compatible id shared-dma-pool

[    0.000000] Reserved memory: created CMA memory pool at 0x00000000eac00000, size 8 MiB

[    0.000000] OF: reserved mem: initialized node sdsp_region, compatible id shared-dma-pool

[    0.000000] Reserved memory: created CMA memory pool at 0x00000000ea000000, size 12 MiB

[    0.000000] OF: reserved mem: initialized node adsp_region, compatible id shared-dma-pool

[    0.000000] Reserved memory: created DMA memory pool at 0x00000000ffc00000, size 0 MiB

[    0.000000] OF: reserved mem: initialized node mailbox_region, compatible id shared-dma-pool

[    0.000000] Removed memory: created DMA memory pool at 0x0000000080880000, size 0 MiB

[    0.000000] OF: reserved mem: initialized node res_xbl_uefi_log_region@80880000, compatible id removed-dma-pool

[    0.000000] Removed memory: created DMA memory pool at 0x0000000086700000, size 1 MiB

[    0.000000] OF: reserved mem: initialized node pil_wlan_fw_region@86700000, compatible id removed-dma-pool

[    0.000000] Removed memory: created DMA memory pool at 0x0000000086800000, size 0 MiB

[    0.000000] OF: reserved mem: initialized node pil_ipa_fw_region@86800000, compatible id removed-dma-pool

[    0.000000] Removed memory: created DMA memory pool at 0x0000000086810000, size 0 MiB

[    0.000000] OF: reserved mem: initialized node pil_ipa_gsi_region@86810000, compatible id removed-dma-pool

[    0.000000] Removed memory: created DMA memory pool at 0x000000008681a000, size 0 MiB

[    0.000000] OF: reserved mem: initialized node pil_gpu_region@8681a000, compatible id removed-dma-pool

[    0.000000] Removed memory: created DMA memory pool at 0x0000000086900000, size 5 MiB

[    0.000000] OF: reserved mem: initialized node pil_npu_region@86900000, compatible id removed-dma-pool

[    0.000000] Removed memory: created DMA memory pool at 0x0000000086e00000, size 5 MiB

[    0.000000] OF: reserved mem: initialized node pil_video_region@86e00000, compatible id removed-dma-pool

[    0.000000] Removed memory: created DMA memory pool at 0x0000000087300000, size 5 MiB

[    0.000000] OF: reserved mem: initialized node pil_cvp_region@87300000, compatible id removed-dma-pool

[    0.000000] Removed memory: created DMA memory pool at 0x0000000087800000, size 20 MiB

[    0.000000] OF: reserved mem: initialized node pil_cdsp_region@87800000, compatible id removed-dma-pool

[    0.000000] Removed memory: created DMA memory pool at 0x0000000088c00000, size 21 MiB

[    0.000000] OF: reserved mem: initialized node pil_slpi_region@88c00000, compatible id removed-dma-pool

[    0.000000] Removed memory: created DMA memory pool at 0x000000008a100000, size 29 MiB

[    0.000000] OF: reserved mem: initialized node pil_adsp_region@8a100000, compatible id removed-dma-pool

[    0.000000] Removed memory: created DMA memory pool at 0x000000008be00000, size 1 MiB

[    0.000000] OF: reserved mem: initialized node pil_spss_region@8be00000, compatible id removed-dma-pool

[    0.000000] Removed memory: created DMA memory pool at 0x000000008bf00000, size 70 MiB

[    0.000000] OF: reserved mem: initialized node cdsp_secure_heap@8bf00000, compatible id removed-dma-pool

[    0.000000] Removed memory: created DMA memory pool at 0x0000000090500000, size 1 MiB

[    0.000000] OF: reserved mem: initialized node ramoops@90500000, compatible id removed-dma-pool

[    0.000000] psci: probing for conduit method from DT.

[    0.000000] psci: PSCIv1.1 detected in firmware.

[    0.000000] psci: Using standard PSCI v0.2 function IDs

[    0.000000] psci: MIGRATE_INFO_TYPE not supported.

[    0.000000] psci: SMC Calling Convention v1.1

[    0.000000] random: fast init done

[    0.000000] percpu: Embedded 474 pages/cpu s1904032 r8192 d29280 u1941504

[    0.000000] Detected VIPT I-cache on CPU0

[    0.000000] CPU features: kernel page table isolation disabled by kernel configuration

[    0.000000] CPU features: detected: Speculative Store Bypassing Safe (SSBS)

[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 1465672

[    0.000000] Kernel command line: cgroup_disable=pressure rcupdate.rcu_expedited=1 rcu_nocbs=0-7 kpti=off console=ttyMSM0,115200n8 androidboot.hardware=qcom androidboot.console=ttyMSM0 androidboot.memcg=1 lpm_levels.sleep_disabled=1 video=vfb:640x400,bpp=32,memsize=3072000 msm_rtb.filter=0x237 service_locator.enable=1 androidboot.usbcontroller=a600000.dwc3 swiotlb=2048 loop.max_part=7 cgroup.memory=nokmem,nosocket reboot=panic_warm buildvariant=userdebug androidboot.verifiedbootstate=orange androidboot.keymaster=1 androidboot.vbmeta.device=PARTUUID=e5f65754-8a35-603c-79c1-cd1d561a12d6 androidboot.vbmeta.avb_version=1.0 androidboot.vbmeta.device_state=unlocked androidboot.vbmeta.hash_alg=sha256 androidboot.vbmeta.size=7552 androidboot.vbmeta.digest=e8751064a653bff6a1f538baf44b85f92cc1a1766c60bee3f15b44e477559c39 androidboot.vbmeta.invalidate_on_error=yes androidboot.veritymode=enforcing androidboot.bootdevice=1d84000.ufshc androidboot.fstab_suffix=default androidboot.boot_devices=soc/1d84

[    0.000000] cgroup: Disabling pressure control group feature

[    0.000000] log_buf_len individual max cpu contribution: 131072 bytes

[    0.000000] log_buf_len total cpu_extra contributions: 917504 bytes

[    0.000000] log_buf_len min size: 131072 bytes

[    0.000000] log_buf_len: 1048576 bytes

[    0.000000] early log buf free: 122876(93%)

[    0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)

[    0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)

[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off

[    0.000000] Memory: 5351748K/5960896K available (24060K kernel code, 3346K rwdata, 10944K rodata, 9216K init, 23501K bss, 252796K reserved, 356352K cma-reserved)

[    0.000000] random: random: get_random_u64 called from __kmem_cache_create+0x8c/0x6b0 with crng_init=1

[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1

[    0.000000] ftrace: allocating 54290 entries in 213 pages

[    0.000000] Running RCU self tests

[    0.000000] rcu: Preemptible hierarchical RCU implementation.

[    0.000000] rcu:     RCU dyntick-idle grace-period acceleration is enabled.

[    0.000000] rcu:     RCU lockdep checking is enabled.

[    0.000000]  All grace periods are expedited (rcu_expedited).

[    0.000000]  Tasks RCU enabled.

[    0.000000] kmemleak: Kernel memory leak detector disabled

[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0

[    0.000000] GICv3: Distributor has no Range Selector support

[    0.000000] GICv3: no VLPI support, no direct LPI support

[    0.000000] ITS: No ITS available, not enabling LPIs

[    0.000000] rcu:     Offload RCU callbacks from CPUs: 0-7.

[    0.000000] Successfully registered dummy reset controller for cpucc_clocks

[    0.000000] Successfully registered dummy clock controller for cpucc_clocks

[    0.000000] arch_timer: CPU0: Trapping CNTVCT access

[    0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt).

[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns

[    0.000005] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns

[    0.000054] clocksource: Switched to clocksource arch_sys_counter

[    0.002278] Console: colour dummy device 80x25

[    0.002309] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar

[    0.002329] ... MAX_LOCKDEP_SUBCLASSES:  8

[    0.002349] ... MAX_LOCK_DEPTH:          48

[    0.002369] ... MAX_LOCKDEP_KEYS:        8191

[    0.002389] ... CLASSHASH_SIZE:          4096

[    0.002409] ... MAX_LOCKDEP_ENTRIES:     32768

[    0.002429] ... MAX_LOCKDEP_CHAINS:      65536

[    0.002448] ... CHAINHASH_SIZE:          32768

[    0.002468]  memory used by lock dependency info: 7903 kB

[    0.002487]  per task-struct memory footprint: 3072 bytes

[    0.002551] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)

[    0.002580] pid_max: default: 32768 minimum: 301

[    0.003397] Security Framework initialized

[    0.003434] SELinux:  Initializing.

[    0.004229] AppArmor: AppArmor disabled by boot time parameter

[    0.004686] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)

[    0.004839] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)

[    0.019271] ASID allocator initialised with 65536 entries

[    0.020577] rcu: Hierarchical SRCU implementation.

[    0.055592] shmbridge is enabled

[    0.056519] EFI services will not be available.

[    0.062054] smp: Bringing up secondary CPUs ...

[    0.070727] Detected VIPT I-cache on CPU1

[    0.070836] arch_timer: CPU1: Trapping CNTVCT access

[    0.070851] CPU1: Booted secondary processor 0x0000000100 [0x51df805e]

[    0.080218] Detected VIPT I-cache on CPU2

[    0.080293] arch_timer: CPU2: Trapping CNTVCT access

[    0.080305] CPU2: Booted secondary processor 0x0000000200 [0x51df805e]

[    0.088855] Detected VIPT I-cache on CPU3

[    0.088915] arch_timer: CPU3: Trapping CNTVCT access

[    0.088926] CPU3: Booted secondary processor 0x0000000300 [0x51df805e]

[    0.097835] CPU features: enabling workaround for Mismatched cache type

[    0.097857] CPU features: enabling workaround for ARM erratum 1542418

[    0.097874] CPU features: detected: Hardware dirty bit management

[    0.097892] Detected PIPT I-cache on CPU4

[    0.097926] CPU features: Unsupported CPU feature variation detected.

[    0.098011] arch_timer: CPU4: Trapping CNTVCT access

[    0.098037] CPU4: Booted secondary processor 0x0000000400 [0x411fd0d0]

[    0.107639] Detected PIPT I-cache on CPU5

[    0.107749] arch_timer: CPU5: Trapping CNTVCT access

[    0.107776] CPU5: Booted secondary processor 0x0000000500 [0x411fd0d0]

[    0.108307] NOHZ: local_softirq_pending 02

[    0.117587] Detected PIPT I-cache on CPU6

[    0.117697] arch_timer: CPU6: Trapping CNTVCT access

[    0.117724] CPU6: Booted secondary processor 0x0000000600 [0x411fd0d0]

[    0.127257] Detected PIPT I-cache on CPU7

[    0.127315] arch_timer: CPU7: Trapping CNTVCT access

[    0.127326] CPU7: Booted secondary processor 0x0000000700 [0x411fd0d0]

[    0.128301] smp: Brought up 1 node, 8 CPUs

[    0.128375] SMP: Total of 8 processors activated.

[    0.128404] CPU features: detected: GIC system register CPU interface

[    0.128431] CPU features: detected: Privileged Access Never

[    0.128457] CPU features: detected: LSE atomic instructions

[    0.128483] CPU features: detected: User Access Override

[    0.128509] CPU features: detected: 32-bit EL0 Support

[    0.128535] CPU features: detected: RAS Extension Support

[    0.130274] CPU: All CPU(s) started at EL1

[    0.130521] alternatives: patching kernel code

[    0.334869] allocated 62914560 bytes of page_ext

[    0.349065] Node 0, zone   Normal: page owner found early allocated 15846 pages

[    3.042465] Registered cp15_barrier emulation handler

[    3.042534] Registered setend emulation handler

[    3.049312] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns

[    3.049583] futex hash table entries: 2048 (order: 6, 262144 bytes)

[    3.369643] pinctrl core: initialized pinctrl subsystem

[    3.373231]

[    3.373252] *************************************************************

[    3.373268] **     NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE    **

[    3.373283] **                                                         **

[    3.373298] **  IOMMU DebugFS SUPPORT HAS BEEN ENABLED IN THIS KERNEL  **

[    3.373312] **                                                         **

[    3.373326] ** This means that this kernel is built to expose internal **

[    3.373341] ** IOMMU data structures, which may compromise security on **

[    3.373356] ** your system.                                            **

[    3.373370] **                                                         **

[    3.373384] ** If you see this message and you are not debugging the   **

[    3.373399] ** kernel, report this immediately to your vendor!         **

[    3.373413] **                                                         **

[    3.373427] **     NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE    **

[    3.373441] *************************************************************

[    3.374185] DMI not present or invalid.

[    3.376625] NET: Registered protocol family 16

[    3.382563] schedtune: configured to support 6 boost groups

[    3.383926] audit: initializing netlink subsys (disabled)

[    3.385623] audit: type=2000 audit(3.383:1): state=initialized audit_enabled=0 res=1

[    3.392123] cpuidle: using governor menu

[    3.392379] cpuidle: using governor qcom

[    3.393369] NET: Registered protocol family 42

[    3.394357] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.

[    3.410372] DMA: preallocated 256 KiB pool for atomic allocations

[    3.415415] DMA: preallocated 256 KiB pool for atomic allocations

[    3.421218] exit: IPA_USB init success!

[    3.428834] console [pstore-1] enabled

[    3.428856] pstore: Registered ramoops as persistent store backend

[    3.428878] ramoops: attached 0x100000@0x90500000, ecc: 0/0

[    3.474159] platform 82400000.qseecom: assigned reserved memory node qseecom_region

[    3.524226] platform soc:qcom,ipa_fws: assigned reserved memory node pil_ipa_gsi_region@86810000

[    3.525126] platform soc:qcom,ipa_uc: assigned reserved memory node pil_ipa_fw_region@86800000

[    3.532873] platform 17300000.qcom,lpass: assigned reserved memory node pil_adsp_region@8a100000

[    3.534394] platform 8300000.qcom,turing: assigned reserved memory node pil_cdsp_region@87800000

[    3.535188] platform aab0000.qcom,venus: assigned reserved memory node pil_video_region@86e00000

[    3.537074] platform 188101c.qcom,spss: assigned reserved memory node pil_spss_region@8be00000

[    3.537887] platform abb0000.qcom,cvpss: assigned reserved memory node pil_cvp_region@87300000

[    3.538929] platform 9800000.qcom,npu: assigned reserved memory node pil_npu_region@86900000

[    3.541347] platform soc:qcom,msm-adsprpc-mem: assigned reserved memory node adsp_region

[    3.546008] platform soc:mem_dump: assigned reserved memory node mem_dump_region

[    3.548333] platform 5c00000.qcom,ssc: assigned reserved memory node pil_slpi_region@88c00000

[    3.576455] platform 88a7000.msm_tspp: assigned reserved memory node qseecom_region

[    3.793829] msm_watchdog 17c10000.qcom,wdt: wdog absent resource not present

[    3.795337] msm_watchdog 17c10000.qcom,wdt: MSM Watchdog Initialized

[    3.802601] Unable to find DT property: qcom,msm-imem-download_mode

[    3.803426] Unable to find DT property: qcom,msm-imem-emergency_download_mode

[    3.827707] msm-dcc 1023000.dcc_v2: DCC list passed 3

[    3.828035] msm-dcc 1023000.dcc_v2: All values written to enable.

[    3.828466] msm-dcc 1023000.dcc_v2: DCC list passed 6

[    3.828815] msm-dcc 1023000.dcc_v2: All values written to enable.

[    3.829246] msm-dcc 1023000.dcc_v2: DCC list passed 7

[    3.829559] msm-dcc 1023000.dcc_v2: All values written to enable.

[    3.829990] msm-dcc 1023000.dcc_v2: Failed to add DCC data in Minidump

[    3.835729] sps:sps is ready.

[    3.837955] spmi spmi-0: PMIC arbiter version v5 (0x50010000)

[    3.851515] pm8150a_s3_mmcx_sup_level: regulator get failed, ret=-517

[    3.854389] pm8150_s3_level: supplied by pm8150a_s3_level

[    3.857140] pm8150_s3_level_ao: supplied by pm8150a_s3_level_ao

[    3.865104] pm8150a_s3_mmcx_sup_level: supplied by pm8150_s3_mmcx_sup_level

[    3.880256] AMOLED: qpnp_amoled_parse_dt: Unknown peripheral type 0x0

[    3.880298] qcom,qpnp-amoled-regulator c440000.qcom,spmi:qcom,pm8150l@5:qcom,amoled: Failed to parse DT params rc=-22

[    3.880394] qcom,qpnp-amoled-regulator: probe of c440000.qcom,spmi:qcom,pm8150l@5:qcom,amoled failed with error -22

[    3.889890] spmi spmi-0: pmic_arb_wait_for_done: transaction failed (0x3)

[    3.948566] pm8150a_s4_level: supplied by pm8150a_s3_mmcx_sup_level

[    3.952231] pm8150a_s4_level_ao: supplied by pm8150a_s3_level_ao

[    4.117455] MSM Memory Dump base table set up

[    4.117513] MSM Memory Dump apps data table set up

[    4.278813] cryptd: max_cpu_qlen set to 1000

[    4.286656] vServices Framework 1.0

[    4.321796] gdsc af03000.qcom,gdsc: Linked as a consumer to regulator.31

[    4.322358] gdsc af03000.qcom,gdsc: Dropping the link to regulator.31

[    4.325390] gdsc 3d9106c.qcom,gdsc: Linked as a consumer to regulator.4

[    4.326556] gpu_cx_gdsc: supplied by pm8150_s3_level

[    4.331116] gdsc 3d9100c.qcom,gdsc: Linked as a consumer to regulator.30

[    4.332470] gpu_gx_gdsc: supplied by pm8150a_s1_level

[    4.337007] gdsc abf0d18.qcom,gdsc: Linked as a consumer to regulator.31

[    4.337296] gdsc abf0d18.qcom,gdsc: Dropping the link to regulator.31

[    4.339185] gdsc abf0bf8.qcom,gdsc: Linked as a consumer to regulator.31

[    4.339456] gdsc abf0bf8.qcom,gdsc: Dropping the link to regulator.31

[    4.341541] gdsc abf0d98.qcom,gdsc: Linked as a consumer to regulator.31

[    4.341818] gdsc abf0d98.qcom,gdsc: Dropping the link to regulator.31

[    4.343889] gdsc abf0c98.qcom,gdsc: Linked as a consumer to regulator.31

[    4.344335] gdsc abf0c98.qcom,gdsc: Dropping the link to regulator.31

[    4.350607] qmp-aop-clk soc:qcom,aopclk: Registered clocks with AOP

[    4.359176] gcc-kona 100000.qcom,gcc: Linked as a consumer to regulator.31

[    4.359667] gcc-kona 100000.qcom,gcc: Linked as a consumer to regulator.4

[    4.360302] gcc-kona 100000.qcom,gcc: Linked as a consumer to regulator.5

[    4.425001] gcc-kona 100000.qcom,gcc: Registered GCC clocks

[    4.429117] gpu_cc-kona 3d90000.qcom,gpucc: Linked as a consumer to regulator.4

[    4.429648] gpu_cc-kona 3d90000.qcom,gpucc: Linked as a consumer to regulator.1

[    4.439081] gpu_cc-kona 3d90000.qcom,gpucc: Registered GPU CC clocks

[    4.442261] npu_cc-kona 9980000.qcom,npucc: Linked as a consumer to regulator.4

[    4.479993] npu_cc-kona 9980000.qcom,npucc: Registered NPU_CC clocks

[    4.484233] video_cc-kona abf0000.qcom,videocc: Linked as a consumer to regulator.1

[    4.484812] video_cc-kona abf0000.qcom,videocc: Linked as a consumer to regulator.31

[    4.484840] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.

[    4.484862] video_cc-kona abf0000.qcom,videocc: Unable to register for bw voting

[    4.485219] video_cc-kona abf0000.qcom,videocc: Dropping the link to regulator.31

[    4.485542] video_cc-kona abf0000.qcom,videocc: Dropping the link to regulator.1

[    4.495978] Minidump: Enabled with max number of regions 200

[    4.497215] socinfo_init: New IDs added! ID => CPU mapping needs an update.

[    4.497702] KPI: Bootloader start count = 55793

[    4.497725] KPI: Bootloader end count = 82206

[    4.497747] KPI: Bootloader display count = 3550965279

[    4.497767] KPI: Bootloader load kernel count = 3370

[    4.497790] KPI: Kernel MPM timestamp = 367856

[    4.497810] KPI: Kernel MPM Clock frequency = 32768

[    4.497876] socinfo_print: v0.15, id=481, ver=2.1, raw_id=342, raw_ver=0, hw_plat=8, hw_plat_ver=65536

[    4.497876]  accessory_chip=0, hw_plat_subtype=0, pmic_model=65566, pmic_die_revision=196608 foundry_id=1 serial_number=3746559112 num_pmics=4 chip_family=0x5d raw_device_family=0x6 raw_device_number=0x8 nproduct_id=0x412 num_clusters=0x1 ncluster_array_offset=0xb0 num_defective_parts=0xc ndefective_parts_array_offset=0xb4 nmodem_supported=0x0

[    4.497900] msm_bus_fabric_rpmh_init_driver

[    4.499037] msm_bus: Probe started

[    4.507468] msm_bus_device 16e0000.ad-hoc-bus: Bus type is missing

[    4.507629] msm_bus_device 16e0000.ad-hoc-bus: Bus type is missing

[    4.508313] msm_bus_device 16e0000.ad-hoc-bus: Bus type is missing

[    4.542149] msm_bus: DT Parsing complete

[    4.574578] msm_bus_fab_init_noc_ops: Invalid Bus type

[    4.575407] msm_bus_fab_init_noc_ops: Invalid Bus type

[    4.579392] msm_bus_fab_init_noc_ops: Invalid Bus type

[    5.631906] Built 1 zonelists, mobility grouping on.  Total pages: 1421782

[    8.059726] mem-offline: Added memory blocks ranging from mem16 - mem19

[    8.076449] arm-smmu 3da0000.kgsl-smmu: Linked as a consumer to regulator.69

[    8.076716] arm-smmu 3da0000.kgsl-smmu:      non-coherent table walk

[    8.076743] arm-smmu 3da0000.kgsl-smmu:      (IDR0.CTTW overridden by FW configuration)

[    8.076791] arm-smmu 3da0000.kgsl-smmu:      stream matching with 6 register groups

[    8.093224] register_client_adhoc:find path.src 161 dest 627

[    8.096308] register_client_adhoc:Client handle 1 apps_smmu

[    8.096759] arm-smmu 15000000.apps-smmu:     non-coherent table walk

[    8.096794] arm-smmu 15000000.apps-smmu:     (IDR0.CTTW overridden by FW configuration)

[    8.096896] arm-smmu 15000000.apps-smmu:     stream matching with 87 register groups

[    8.102074] register_client_adhoc:find path.src 161 dest 627

[    8.104912] register_client_adhoc:Client handle 2 apps_smmu

[    8.107425] register_client_adhoc:find path.src 161 dest 627

[    8.110294] register_client_adhoc:Client handle 3 apps_smmu

[    8.113462] qsmmuv500-tbu 1518d000.mnoc_hf_0_tbu: Linked as a consumer to regulator.65

[    8.113960] register_client_adhoc:find path.src 22 dest 773

[    8.115451] register_client_adhoc:Client handle 4 mnoc_hf_0_tbu

[    8.118380] qsmmuv500-tbu 15191000.mnoc_hf_1_tbu: Linked as a consumer to regulator.66

[    8.118780] register_client_adhoc:find path.src 22 dest 773

[    8.120300] register_client_adhoc:Client handle 5 mnoc_hf_1_tbu

[    8.123074] register_client_adhoc:find path.src 154 dest 10070

[    8.124172] register_client_adhoc:Client handle 6 apps_smmu

[    8.126543] register_client_adhoc:find path.src 154 dest 10070

[    8.127509] register_client_adhoc:Client handle 7 apps_smmu

[    8.130307] register_client_adhoc:find path.src 161 dest 627

[    8.133232] register_client_adhoc:Client handle 8 apps_smmu

[    8.135613] register_client_adhoc:find path.src 161 dest 627

[    8.138438] register_client_adhoc:Client handle 9 apps_smmu

[    8.141899] qsmmuv500-tbu 151a5000.mnoc_sf_0_tbu: Linked as a consumer to regulator.67

[    8.142324] register_client_adhoc:find path.src 137 dest 772

[    8.143749] register_client_adhoc:Client handle 10 mnoc_sf_0_tbu

[    8.146500] qsmmuv500-tbu 151a9000.mnoc_sf_1_tbu: Linked as a consumer to regulator.68

[    8.147012] register_client_adhoc:find path.src 137 dest 772

[    8.148445] register_client_adhoc:Client handle 11 mnoc_sf_1_tbu

[    8.151259] Error: Driver 'arm-smmu' is already registered, aborting...

[    8.151933] vgaarb: loaded

[    8.156252] SCSI subsystem initialized

[    8.157766] usbcore: registered new interface driver usbfs

[    8.158184] usbcore: registered new interface driver hub

[    8.160297] usbcore: registered new device driver usb

[    8.162656] usb_phy_generic soc:usb_nop_phy: soc:usb_nop_phy supply vcc not found, using dummy regulator

[    8.163272] usb_phy_generic soc:usb_nop_phy: Linked as a consumer to regulator.0

[    8.168383] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8150@0:qcom,power-on@800: PMIC@SID0 Power-on reason: Triggered from SMPL (Sudden Momentary Power Loss) and 'cold' boot

[    8.168442] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8150@0:qcom,power-on@800: PMIC@SID0: Power-off reason: Triggered from UVLO (Under Voltage Lock Out)

[    8.169772] input: qpnp_pon as /devices/platform/soc/c440000.qcom,spmi/spmi-0/spmi0-00/c440000.qcom,spmi:qcom,pm8150@0:qcom,power-on@800/input/input0

[    8.172379] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8150l@4:qcom,power-on@800: PMIC@SID4 Power-on reason: Triggered from PON1 (Secondary PMIC) and 'cold' boot

[    8.172434] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8150l@4:qcom,power-on@800: PMIC@SID4: Power-off reason: Triggered from FAULT_FAULT_N

[    8.173931] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8009@a:qcom,power-on@800: Invalid PON_PERPH_SUBTYPE 0x07

[    8.174011] qcom,qpnp-power-on: probe of c440000.qcom,spmi:qcom,pm8009@a:qcom,power-on@800 failed with error -22

[    8.174317] spmi spmi-0: pmic_arb_wait_for_done: transaction failed (0x3)

[    8.174358] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pmxprairie@8:qcom,power-on@800: Register read failed, addr=0x0805, rc=-5

[    8.174427] qcom,qpnp-power-on: probe of c440000.qcom,spmi:qcom,pmxprairie@8:qcom,power-on@800 failed with error -5

[    8.175270] media: Linux media interface: v0.10

[    8.175561] videodev: Linux video capture interface: v2.00

[    8.176016] pps_core: LinuxPPS API ver. 1 registered

[    8.176037] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>

[    8.176234] PTP clock support registered