Figure

Handling Cmd: getvar:slot-count

Error getting the info of charger: Device Error

Handling Cmd: reboot

rebooting the device

Start EBS        [29174]

App Log Flush : 0 ms

Exit EBS        [29339] UEFI End

Format: Log Type - Time(microsec) - Message - Optional Info

Log Type: B - Since Boot(Power On Reset),  D - Delta,  S - Statistic

S - QC_IMAGE_VERSION_STRING=BOOT.XF.3.2-00364-SM8250-1

S - IMAGE_VARIANT_STRING=Soc8250LAA

S - OEM_IMAGE_VERSION_STRING=tangjz-dev

S - Boot Interface: UFS

S - Secure Boot: Off

S - Boot Config @ 0x00786070 = 0x00000001

S - JTAG ID @ 0x00786130 = 0x001560e1

S - OEM ID @ 0x00786138 = 0x00000000

S - Serial Number @ 0x00786134 = 0x15c529aa

S - OEM Config Row 0 @ 0x007841e0 = 0x0000000000000000

S - OEM Config Row 1 @ 0x007841e8 = 0x0000000000000000

S - Feature Config Row 0 @ 0x007841f8 = 0x0040200000000400

S - Feature Config Row 1 @ 0x00784200 = 0xc000000000000000

S - Core 0 Frequency, 1516 MHz

S - PBL Patch Ver: 5

S - PBL freq: 600 MHZ

D -      6210 - pbl_apps_init_timestamp

D -     37194 - bootable_media_detect_timestamp

D -       915 - bl_elf_metadata_loading_timestamp

D -       713 - bl_hash_seg_auth_timestamp

D -      6074 - bl_elf_loadable_segment_loading_timestamp

D -      5512 - bl_elf_segs_hash_verify_timestamp

D -      7018 - bl_sec_hash_seg_auth_timestamp

D -       818 - bl_sec_segs_hash_verify_timestamp

D -        32 - pbl_populate_shared_data_and_exit_timestamp

S -     64486 - PBL, End

B -     78354 - SBL1, Start

B -    193370 - SBL1 BUILD @ 06:34:07 on Oct 20 2022

B -    197518 - usb: usb_shared_hs_phy_init: hs phy cfg size , 0xc

D -     10614 - sbl1_hw_init

D -         0 - boot_flash_init

B -    300699 - UFS INQUIRY ID: SKhynix HN8T05BZGKX015  A043

B -    303139 - UFS Boot LUN: 1

D -       915 - Auth Metadata

D -    107330 - sbl1_xblconfig_init

D -         0 - boot_config_data_table_default_init

B -    322110 - Using default CDT

D -      4728 - boot_config_data_table_init

B -    329918 - CDT Version:3,Platform ID:8,Major ID:1,Minor ID:0,Subtype:0

D -     17355 - sbl1_hw_platform_pre_ddr

D -         0 - devcfg init

B -    358649 - PM: PM 0=0x8000028000000041:0x2000

B -    358710 - PM: PM 2=0x8000018000000020:0x800

B -    363468 - PM: PM 5=0x8000018000000040:0x0

B -    368074 - PM: HARD RESET by PS_HOLD

B -    374631 - PM: PMA_2 PON:CBL ON:PON POFF:PS OFF:POFF FAULT2:PBS

B -    382073 - PM: PMA_3 PON:CBL ON:PON POFF:PS OFF:POFF FAULT2:PBS

B -    468907 - PM: SET_VAL:Skip

B -    469334 - PM: PSI: b0x00_v0x53

B -    475525 - PM: Device Init # SPMI Transn: 3948

B -    483577 - PM: Driver Init # SPMI Transn: 493

B -    483608 - PM: CHG Init # SPMI Transn: 0

D -    137220 - pmic XBL init

D -     29493 - vsense_railway_cpr init

D -    174673 - sbl1_hw_pre_ddr_init

D -         0 - boot_dload_handle_forced_dload_timeout

D -      1464 - sbl1_load_ddr_training_data

D -      5124 - sbl1_ddr_set_params

B -    554917 - eCDT MRR - Data Starting Address: 0x09066D00

B -    557113 - DSF version = 156.8.18

B -    560559 - Manufacturer ID = 6, Device Type = 8

B -    564158 - Rank 0 size = 4096 MB, Rank 1 size = 4096 MB

D -     31202 - sbl1_ddr_init

D -        30 - boot_pre_ddi_entry

B -    577273 - do_ddr_training, Start

B -    608993 - DDR: Start of DDR Training Init

B -  16757798 - Frequency = 1805 MHz

B -  16757828 - DDR: End of DDR Training Init

D -  16194066 - do_ddr_training, Delta

D -       915 - sbl1_save_ddr_training_data

D -  16200960 - sbl1_do_ddr_training

D -         0 - sbl1_hand_control_to_devprog_ddr

D -      1037 - boot_ddi_entry

B -  16790067 - Pimem init cmd, entry

D -     10736 - Pimem init cmd, exit

D -     13908 - sbl1_post_ddr_init

D -         0 - sbl1_hw_init_secondary

B -  16810532 - APDP Image Load, Start

D -       854 - Auth Metadata

D -       427 - Segments hash check

D -      9699 - APDP Image Loaded, Delta - (8204 Bytes)

D -         0 - boot_dload_dump_security_regions

B -  16828710 - usb: UFS Serial - 6545d746

B -  16833133 - usb: fedl, vbus_det_err

D -      8418 - boot_dload_check

D -         0 - boot_cache_set_memory_barrier

D -         0 - boot_smem_debug_init

D -       366 - boot_smem_init

D -        31 - boot_smem_alloc_for_minidump

B -  16854300 - PM: SMEM Chgr Info Write Success

D -      4118 - boot_smem_store_pon_status

D -        31 - sbl1_hw_platform_smem

D -        61 - boot_ddr_share_data_to_aop

D -       518 - boot_clock_init_rpm

D -         0 - boot_vsense_copy_to_smem

D -         0 - boot_share_flash_data

D -         0 - boot_populate_ram_partition_table

D -        61 - boot_populate_ddr_details_shared_table

D -         0 - sbl1_tlmm_init

D -         0 - sbl1_efs_handle_cookies

D -         0 - boot_apt_test

B -  16901026 - OEM_MISC Image Load, Start

D -       762 - Auth Metadata

D -       244 - Segments hash check

D -      9272 - OEM_MISC Image Loaded, Delta - (8136 Bytes)

B -  16913714 - QTI_MISC Image Load, Start

D -      5337 - QTI_MISC Image Loaded, Delta - (0 Bytes)

B -  16930367 - PM: PM Total Mem Allocated: 2658

D -      7381 - sbl1_pm_aop_pre_init_wrapper

B -  16934942 - AOP Image Load, Start

D -       915 - Auth Metadata

D -      1921 - Segments hash check

D -     13298 - AOP Image Loaded, Delta - (198304 Bytes)

B -  16951534 - QSEE Dev Config Image Load, Start

D -       854 - Auth Metadata

D -       580 - Segments hash check

D -     12505 - QSEE Dev Config Image Loaded, Delta - (45268 Bytes)

B -  16973067 - QSEE Image Load, Start

D -      4331 - Auth Metadata

D -     20283 - Segments hash check

D -     65849 - QSEE Image Loaded, Delta - (3146293 Bytes)

D -         0 - sbl1_hw_play_vibr

B -  17047761 - SEC Image Load, Start

D -      2959 - SEC Image Loaded, Delta - (0 Bytes)

B -  17054197 - CPUCPFW Image Load, Start

D -      4727 - CPUCPFW Image Loaded, Delta - (0 Bytes)

B -  17062798 - QHEE Image Load, Start

D -       824 - Auth Metadata

D -      2989 - Segments hash check

D -     12962 - QHEE Image Loaded, Delta - (444216 Bytes)

B -  17079054 - OEM_HYP Image Load, Start

D -      5277 - OEM_HYP Image Loaded, Delta - (0 Bytes)

B -  17088174 - STI Image Load, Start

D -      5093 - STI Image Loaded, Delta - (0 Bytes)

B -  17097293 - APPSBL Image Load, Start

D -      1037 - Auth Metadata

D -     12962 - Segments hash check

D -     23790 - APPSBL Image Loaded, Delta - (2510848 Bytes)

D -         0 - sbl1_appsbl_arch_determination

B -  17130172 - SBL1, End

D -  17055875 - SBL1, Delta

S - Flash Throughput, 246000 KB/s  (6437675 Bytes,  26153 us)

S - DDR Frequency, 1555 MHz

UEFI Start     [17360]

 - 0x09FC01000 [17364] Sec.efi

ASLR        : ON

DEP         : ON (RTB)

Timer Delta : -17181 mS

RAM Entry 0 : Base 0x080000000  Size 0x03B800000

RAM Entry 1 : Base 0x180000000  Size 0x100000000

RAM Entry 2 : Base 0x0C0000000  Size 0x0C0000000

Total RAM   : 0x1FB800000

UEFI Ver    : 5.0.221019.BOOT.XF.3.2-00364-SM8250-1

Build Info  : 64b Oct 19 2022 09:04:19

Boot Device : UFS

PROD Mode   : TRUE

Retail      : TRUE

EFI_GetBoardId: Failed to load GPIO or TLMM Protocol! Status = Not Found

EFI_GetBoardId: Failed to load GPIO or TLMM Protocol! Status = Not Found

PM0: 30, PM2: 31, PM3: 33, PM5: 36,

UFS INQUIRY ID: SKhynix HN8T05BZGKX015  A043

UFS Boot LUN: 1

HW Wdog Setting from PCD : Disabled

SPSSDxe:: SPSSDxe_PreLoadChecks SPSS loading in UEFI not supported for this chipID = 481

UsbConfigLibOpenProtocols: PMI version (0x0)

UsbConfigInit: UsbConfigInit, not start on port: 0, mode 0

UsbConfigInit: UsbConfigInit, not start on port: 1, mode 0

UsbPwrCtrlLib_GetTypeCPortStatus Failed, Error[Device Error]

UsbConfigPortsQueryConnectionChange: GetTypeCPortStatus returned ERROR (0x7), switching platform to UNKNOWN

ERROR:  Failed to get Battery Presence: Device Error

APC1 IDDQ WC 0 , L2:0, CPU[0]:175, CPU[1]:175, CPU[2]:175, CPU[3]:175

 APC1 Total 700

LoadSys  TIME 0ms

tsens  TIME 1ms

scm  TIME 2ms

Load CPU 0 Slp: 0x64, Int: 0x1D

Load CPU 1 Slp: 0xE0, Int: 0xFFFFFF65

Load CPU 2 Slp: 0x78, Int: 0x84

Load CPU 3 Slp: 0x107, Int: 0xFFFFFFB1

Load GPU 0 Slp: 0x9D, Int: 0xE6 adc_min:0x190 adc_max:0x161

Load NPU 0 Slp: 0x2D, Int: 0x29

LmhIsenseInit Pre CPU  TIME 0ms

GLD IDDQ WC 0

LmhIsenseSubSysEntry Post SubSysEntryCb  TIME 0ms

LmhIsenseSubSysEntry Post LmhIsenseSubSysInit  TIME 0ms

LmhIsenseInitSubSys Post SubSysEntry  TIME 0ms

LmhIsenseInitSubSys Post SubSysTrim  TIME 0ms

LmhIsenseInitSubSys Post SubSysExit  TIME 0ms

LmhIsenseInit Post CPU  TIME 0ms

GPU IDDQ 51

LmhIsenseSubSysEntry Post SubSysEntryCb  TIME 0ms

LmhIsenseSubSysEntry Post LmhIsenseSubSysInit  TIME 0ms

LmhIsenseInitSubSys Post SubSysEntry  TIME 0ms

LmhIsenseInitSubSys Post SubSysTrim  TIME 0ms

LmhIsenseInitSubSys Post SubSysExit  TIME 1ms

LmhIsenseInit Post GPU  TIME 2ms

Entering in func1 of NPU  TIME 2ms

NPU IDDQ 65

LmhIsenseSubSysEntry Post SubSysEntryCb  TIME 0ms

LmhIsenseSubSysEntry Post LmhIsenseSubSysInit  TIME 0ms

LmhIsenseInitSubSys Post SubSysEntry  TIME 0ms

LmhIsenseInitSubSys Post SubSysTrim  TIME 0ms

LmhIsenseInitSubSys Post SubSysExit  TIME 0ms

LmhIsenseInit Post NPU  TIME 2ms

isense  TIME 5ms

ISENSE TOTAL TIME 5ms

Disp init wait [17837]

-----------------------------

Platform Init  [17855] BDS

UEFI Ver   : 5.0.221019.BOOT.XF.3.2-00364-SM8250-1

Platform           : MTP

Chip Name          : QCS8250

Chip Ver           : 2.1

Chip Serial Number : 0x15C529AA

Silver cluster Core 0 Freq: 1516 MHz

-----------------------------

QcomChargerApp:: QcomChargerApp_Entry Can not locate Charger Protocol = Not Found

Failed to launch default charger app, status: Device Error

UEFI Total : 517 ms

POST Time      [17877] OS Loader

Loader Build Info: Nov  7 2022 13:00:59

VB: Non-secure device: Security State: (0xF7F)

VB: RWDeviceState: Succeed using devinfo!

Total DDR Size: 0x00000001FB800000

KeyPress:0, BootReason:0

Fastboot=0, Recovery:0

GetVmData: No Vm data present! Status = (0x3)

VM Hyp calls not present

Booting from slot (_a)

Booting Into Mission Mode

Loading Image Start : 17896 ms

Loading Image Done : 17896 ms

Total Image Read size : 4096 Bytes

Invalid vendor_boot partition. Skipping

Load Image vbmeta_a total time: 0 ms

Load Image vbmeta_system_a total time: 0 ms

Load Image boot_a total time: 103 ms

avb_slot_verify.c:256: ERROR: boot_a: Hash of data does not match digest in descriptor.

Load Image dtbo_a total time: 26 ms

VB2: Authenticate complete! boot state is: orange

VB2: boot state: orange(1)

Failed to get the graphics output protocol.

Failed to get the graphics output protocol.

Failed to get width or height

Failed to get the graphics output protocol.

Failed to get the graphics output protocol.

Unable to show verified menu on screen: Out of Resources

Device is unlocked, Skipping boot verification

tsnv magic=0x564E5354

Memory Base Address: 0x80000000

Override DTB: GetBlkIOHandles failed loading user_dtbo!

Apply Overlay total time: 314 ms

Error getting off mode charging info: Device Error

Unable to get Panel Config, Not Found

VB: Non-secure device: Security State: (0xF7F)

VB: RWDeviceState: Succeed using devinfo!

TSNV: find node for id=21

TSNV: find node for id=11

Cmdline: console=ttyMSM0,115200n8 androidboot.hardware=qcom androidboot.console=ttyMSM0 androidboot.memcg=1 lpm_levels.sleep_disabled=1 video=vfb:640x400,bpp=32,memsize=3072000 msm_rtb.filter=0x237 service_locator.enable=1 androidboot.usbcontroller=a600000.dwc3 swiotlb=2048 loop.max_part=7 cgroup.memory=nokmem,nosocket reboot=panic_warm buildvariant=userdebug androidboot.verifiedbootstate=orange androidboot.keymaster=1 androidboot.vbmeta.device=PARTUUID=f9c2f0a6-0767-f620-65b3-d7746b82e057 androidboot.vbmeta.avb_version=1.0 androidboot.vbmeta.device_state=unlocked androidboot.vbmeta.hash_alg=sha256 androidboot.vbmeta.size=7616 androidboot.vbmeta.digest=0ea4f0527cafa69ffb9722f32b1edd621dae4be386eb0161553a0b3662274100 androidboot.vbmeta.invalidate_on_error=yes andro

RAM Partitions

Add Base: 0x0000000080000000 Available Length: 0x000000003B800000

Add Base: 0x0000000180000000 Available Length: 0x0000000100000000

Add Base: 0x00000000C0000000 Available Length: 0x00000000C0000000

Unable to get splash buffer info, Not Found

TSNV: find node for id=22

Update Device Tree total time: 44 ms

Shutting Down UEFI Boot Services: 18565 ms

Start EBS        [18565]

BDS: LogFs sync skipped, Unsupported

App Log Flush : 80 ms

Exit EBS        [18663] UEFI End

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x51df805e]

[    0.000000] Linux version 4.19.157-perf+ (root@tangjz-dev) (clang version 10.0.7 for Android NDK, GNU ld (binutils-2.27-bd24d23f) 2.27.0.20170315) #9 SMP PREEMPT Thu Nov 10 11:32:12 UTC 2022

[    0.000000] Machine model: Qualcomm Technologies, Inc. kona MTP-RmPM8150b. VX1(MCE) EVT2

[    0.000000] Memory limit set/overridden to 6072MB

[    0.000000] OF: reserved mem: OVERLAP DETECTED!

[    0.000000] disp_rdump_region@9c000000 (0x000000009c000000--0x000000009c800000) overlaps with cont_splash_region@9c000000 (0x000000009c000000--0x000000009e300000)

[    0.000000] Reserved memory: created CMA memory pool at 0x00000000fec00000, size 16 MiB

[    0.000000] OF: reserved mem: initialized node user_contig_region, compatible id shared-dma-pool

[    0.000000] Reserved memory: created CMA memory pool at 0x00000000fcc00000, size 32 MiB

[    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool

[    0.000000] Reserved memory: created CMA memory pool at 0x00000000fbc00000, size 16 MiB

[    0.000000] OF: reserved mem: initialized node qseecom_ta_region, compatible id shared-dma-pool

[    0.000000] Reserved memory: created CMA memory pool at 0x00000000f1800000, size 164 MiB

[    0.000000] OF: reserved mem: initialized node secure_display_region, compatible id shared-dma-pool

[    0.000000] Reserved memory: created CMA memory pool at 0x00000000f0400000, size 20 MiB

[    0.000000] OF: reserved mem: initialized node cnss_wlan_region, compatible id shared-dma-pool

[    0.000000] Reserved memory: created CMA memory pool at 0x00000000edc00000, size 40 MiB

[    0.000000] OF: reserved mem: initialized node mem_dump_region, compatible id shared-dma-pool

[    0.000000] Reserved memory: created CMA memory pool at 0x00000000ecc00000, size 16 MiB

[    0.000000] OF: reserved mem: initialized node sp_region, compatible id shared-dma-pool

[    0.000000] Reserved memory: created CMA memory pool at 0x00000000ec800000, size 4 MiB

[    0.000000] OF: reserved mem: initialized node cdsp_region, compatible id shared-dma-pool

[    0.000000] Reserved memory: created CMA memory pool at 0x00000000eb400000, size 20 MiB

[    0.000000] OF: reserved mem: initialized node qseecom_region, compatible id shared-dma-pool

[    0.000000] Reserved memory: created CMA memory pool at 0x00000000eac00000, size 8 MiB

[    0.000000] OF: reserved mem: initialized node sdsp_region, compatible id shared-dma-pool

[    0.000000] Reserved memory: created CMA memory pool at 0x00000000ea000000, size 12 MiB

[    0.000000] OF: reserved mem: initialized node adsp_region, compatible id shared-dma-pool

[    0.000000] Reserved memory: created DMA memory pool at 0x00000000ffc00000, size 0 MiB

[    0.000000] OF: reserved mem: initialized node mailbox_region, compatible id shared-dma-pool

[    0.000000] Removed memory: created DMA memory pool at 0x0000000080880000, size 0 MiB

[    0.000000] OF: reserved mem: initialized node res_xbl_uefi_log_region@80880000, compatible id removed-dma-pool

[    0.000000] Removed memory: created DMA memory pool at 0x0000000086700000, size 1 MiB

[    0.000000] OF: reserved mem: initialized node pil_wlan_fw_region@86700000, compatible id removed-dma-pool

[    0.000000] Removed memory: created DMA memory pool at 0x0000000086800000, size 0 MiB

[    0.000000] OF: reserved mem: initialized node pil_ipa_fw_region@86800000, compatible id removed-dma-pool

[    0.000000] Removed memory: created DMA memory pool at 0x0000000086810000, size 0 MiB

[    0.000000] OF: reserved mem: initialized node pil_ipa_gsi_region@86810000, compatible id removed-dma-pool

[    0.000000] Removed memory: created DMA memory pool at 0x000000008681a000, size 0 MiB

[    0.000000] OF: reserved mem: initialized node pil_gpu_region@8681a000, compatible id removed-dma-pool

[    0.000000] Removed memory: created DMA memory pool at 0x0000000086900000, size 5 MiB

[    0.000000] OF: reserved mem: initialized node pil_npu_region@86900000, compatible id removed-dma-pool

[    0.000000] Removed memory: created DMA memory pool at 0x0000000086e00000, size 5 MiB

[    0.000000] OF: reserved mem: initialized node pil_video_region@86e00000, compatible id removed-dma-pool

[    0.000000] Removed memory: created DMA memory pool at 0x0000000087300000, size 5 MiB

[    0.000000] OF: reserved mem: initialized node pil_cvp_region@87300000, compatible id removed-dma-pool

[    0.000000] Removed memory: created DMA memory pool at 0x0000000087800000, size 20 MiB

[    0.000000] OF: reserved mem: initialized node pil_cdsp_region@87800000, compatible id removed-dma-pool

[    0.000000] Removed memory: created DMA memory pool at 0x0000000088c00000, size 21 MiB

[    0.000000] OF: reserved mem: initialized node pil_slpi_region@88c00000, compatible id removed-dma-pool

[    0.000000] Removed memory: created DMA memory pool at 0x000000008a100000, size 29 MiB

[    0.000000] OF: reserved mem: initialized node pil_adsp_region@8a100000, compatible id removed-dma-pool

[    0.000000] Removed memory: created DMA memory pool at 0x000000008be00000, size 1 MiB

[    0.000000] OF: reserved mem: initialized node pil_spss_region@8be00000, compatible id removed-dma-pool

[    0.000000] Removed memory: created DMA memory pool at 0x000000008bf00000, size 70 MiB

[    0.000000] OF: reserved mem: initialized node cdsp_secure_heap@8bf00000, compatible id removed-dma-pool

[    0.000000] Removed memory: created DMA memory pool at 0x0000000090500000, size 1 MiB

[    0.000000] OF: reserved mem: initialized node ramoops@90500000, compatible id removed-dma-pool

[    0.000000] psci: probing for conduit method from DT.

[    0.000000] psci: PSCIv1.1 detected in firmware.

[    0.000000] psci: Using standard PSCI v0.2 function IDs

[    0.000000] psci: MIGRATE_INFO_TYPE not supported.

[    0.000000] psci: SMC Calling Convention v1.1

[    0.000000] random: fast init done

[    0.000000] percpu: Embedded 24 pages/cpu s61080 r8192 d29032 u98304

[    0.000000] Detected VIPT I-cache on CPU0

[    0.000000] CPU features: kernel page table isolation disabled by kernel configuration

[    0.000000] CPU features: detected: Speculative Store Bypassing Safe (SSBS)

[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 1465672

[    0.000000] Kernel command line: cgroup_disable=pressure rcupdate.rcu_expedited=1 rcu_nocbs=0-7 kpti=off console=ttyMSM0,115200n8 androidboot.hardware=qcom androidboot.console=ttyMSM0 androidboot.memcg=1 lpm_levels.sleep_disabled=1 video=vfb:640x400,bpp=32,memsize=3072000 msm_rtb.filter=0x237 service_locator.enable=1 androidboot.usbcontroller=a600000.dwc3 swiotlb=2048 loop.max_part=7 cgroup.memory=nokmem,nosocket reboot=panic_warm buildvariant=userdebug androidboot.verifiedbootstate=orange androidboot.keymaster=1 androidboot.vbmeta.device=PARTUUID=f9c2f0a6-0767-f620-65b3-d7746b82e057 androidboot.vbmeta.avb_version=1.0 androidboot.vbmeta.device_state=unlocked androidboot.vbmeta.hash_alg=sha256 androidboot.vbmeta.size=7616 androidboot.vbmeta.digest=0ea4f0527cafa69ffb9722f32b1edd621dae4be386eb0161553a0b3662274100 androidboot.vbmeta.invalidate_on_error=yes androidboot.veritymode=enforcing androidboot.bootdevice=1d84000.ufshc androidboot.fstab_suffix=default androidboot.boot_devices=soc/1d84

[    0.000000] cgroup: Disabling pressure control group feature

[    0.000000] log_buf_len individual max cpu contribution: 131072 bytes

[    0.000000] log_buf_len total cpu_extra contributions: 917504 bytes

[    0.000000] log_buf_len min size: 131072 bytes

[    0.000000] log_buf_len: 1048576 bytes

[    0.000000] early log buf free: 123044(93%)

[    0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)

[    0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)

[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off

[    0.000000] Memory: 5406412K/5960896K available (22014K kernel code, 2096K rwdata, 9996K rodata, 4096K init, 2700K bss, 198132K reserved, 356352K cma-reserved)

[    0.000000] random: random: get_random_u64 called from __kmem_cache_create+0x3c/0x468 with crng_init=1

[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1

[    0.000000] rcu: Preemptible hierarchical RCU implementation.

[    0.000000] rcu:     RCU dyntick-idle grace-period acceleration is enabled.

[    0.000000]  All grace periods are expedited (rcu_expedited).

[    0.000000]  Tasks RCU enabled.

[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0

[    0.000000] GICv3: Distributor has no Range Selector support

[    0.000000] GICv3: no VLPI support, no direct LPI support

[    0.000000] ITS: No ITS available, not enabling LPIs

[    0.000000] rcu:     Offload RCU callbacks from CPUs: 0-7.

[    0.000000] Successfully registered dummy reset controller for cpucc_clocks

[    0.000000] Successfully registered dummy clock controller for cpucc_clocks

[    0.000000] arch_timer: CPU0: Trapping CNTVCT access

[    0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt).

[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns

[    0.000003] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns

[    0.000019] clocksource: Switched to clocksource arch_sys_counter

[    0.001466] Console: colour dummy device 80x25

[    0.001486] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)

[    0.001494] pid_max: default: 32768 minimum: 301

[    0.001621] Security Framework initialized

[    0.001632] SELinux:  Initializing.

[    0.001716] AppArmor: AppArmor disabled by boot time parameter

[    0.001770] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)

[    0.001788] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)

[    0.003043] ASID allocator initialised with 65536 entries

[    0.003123] rcu: Hierarchical SRCU implementation.

[    0.007529] shmbridge is enabled

[    0.008075] smp: Bringing up secondary CPUs ...

[    0.009166] Detected VIPT I-cache on CPU1

[    0.009218] arch_timer: CPU1: Trapping CNTVCT access

[    0.009226] CPU1: Booted secondary processor 0x0000000100 [0x51df805e]

[    0.010291] Detected VIPT I-cache on CPU2

[    0.010326] arch_timer: CPU2: Trapping CNTVCT access

[    0.010333] CPU2: Booted secondary processor 0x0000000200 [0x51df805e]

[    0.011317] Detected VIPT I-cache on CPU3

[    0.011352] arch_timer: CPU3: Trapping CNTVCT access

[    0.011358] CPU3: Booted secondary processor 0x0000000300 [0x51df805e]

[    0.012741] CPU features: enabling workaround for Mismatched cache type

[    0.012751] CPU features: enabling workaround for ARM erratum 1542418

[    0.012757] CPU features: detected: Hardware dirty bit management

[    0.012763] Detected PIPT I-cache on CPU4

[    0.012782] CPU features: Unsupported CPU feature variation detected.

[    0.012819] arch_timer: CPU4: Trapping CNTVCT access

[    0.012831] CPU4: Booted secondary processor 0x0000000400 [0x411fd0d0]

[    0.014146] Detected PIPT I-cache on CPU5

[    0.014202] arch_timer: CPU5: Trapping CNTVCT access

[    0.014215] CPU5: Booted secondary processor 0x0000000500 [0x411fd0d0]

[    0.015553] Detected PIPT I-cache on CPU6

[    0.015606] arch_timer: CPU6: Trapping CNTVCT access

[    0.015618] CPU6: Booted secondary processor 0x0000000600 [0x411fd0d0]

[    0.017100] Detected PIPT I-cache on CPU7

[    0.017126] arch_timer: CPU7: Trapping CNTVCT access

[    0.017131] CPU7: Booted secondary processor 0x0000000700 [0x411fd0d0]

[    0.017286] smp: Brought up 1 node, 8 CPUs

[    0.017328] SMP: Total of 8 processors activated.

[    0.017333] CPU features: detected: GIC system register CPU interface

[    0.017336] CPU features: detected: Privileged Access Never

[    0.017340] CPU features: detected: LSE atomic instructions

[    0.017343] CPU features: detected: User Access Override

[    0.017347] CPU features: detected: 32-bit EL0 Support

[    0.017351] CPU features: detected: RAS Extension Support

[    0.017654] CPU: All CPU(s) started at EL1

[    0.017698] alternatives: patching kernel code

[    0.097607] Registered cp15_barrier emulation handler

[    0.097625] Registered setend emulation handler

[    0.098073] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns

[    0.098083] futex hash table entries: 2048 (order: 5, 131072 bytes)

[    0.101407] pinctrl core: initialized pinctrl subsystem

[    0.101617]

[    0.101620] *************************************************************

[    0.101622] **     NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE    **

[    0.101625] **                                                         **

[    0.101627] **  IOMMU DebugFS SUPPORT HAS BEEN ENABLED IN THIS KERNEL  **

[    0.101629] **                                                         **

[    0.101632] ** This means that this kernel is built to expose internal **

[    0.101634] ** IOMMU data structures, which may compromise security on **

[    0.101636] ** your system.                                            **

[    0.101638] **                                                         **

[    0.101641] ** If you see this message and you are not debugging the   **

[    0.101643] ** kernel, report this immediately to your vendor!         **

[    0.101646] **                                                         **

[    0.101648] **     NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE    **

[    0.101650] *************************************************************

[    0.101913] NET: Registered protocol family 16

[    0.102546] schedtune: configured to support 6 boost groups

[    0.102601] audit: initializing netlink subsys (disabled)

[    0.102701] audit: type=2000 audit(0.099:1): state=initialized audit_enabled=0 res=1

[    0.103017] cpuidle: using governor menu

[    0.103140] cpuidle: using governor qcom

[    0.103187] NET: Registered protocol family 42

[    0.103370] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.

[    0.104373] DMA: preallocated 256 KiB pool for atomic allocations

[    0.104779] DMA: preallocated 256 KiB pool for atomic allocations

[    0.105116] exit: IPA_USB init success!

[    0.107055] console [pstore-1] enabled

[    0.107059] pstore: Registered ramoops as persistent store backend

[    0.107065] ramoops: attached 0x100000@0x90500000, ecc: 0/0

[    0.109211] platform 82400000.qseecom: assigned reserved memory node qseecom_region

[    0.111478] platform soc:qcom,ipa_fws: assigned reserved memory node pil_ipa_gsi_region@86810000

[    0.111519] platform soc:qcom,ipa_uc: assigned reserved memory node pil_ipa_fw_region@86800000

[    0.111885] platform 17300000.qcom,lpass: assigned reserved memory node pil_adsp_region@8a100000

[    0.111963] platform 8300000.qcom,turing: assigned reserved memory node pil_cdsp_region@87800000

[    0.112013] platform aab0000.qcom,venus: assigned reserved memory node pil_video_region@86e00000

[    0.112119] platform 188101c.qcom,spss: assigned reserved memory node pil_spss_region@8be00000

[    0.112164] platform abb0000.qcom,cvpss: assigned reserved memory node pil_cvp_region@87300000

[    0.112212] platform 9800000.qcom,npu: assigned reserved memory node pil_npu_region@86900000

[    0.112329] platform soc:qcom,msm-adsprpc-mem: assigned reserved memory node adsp_region

[    0.112548] platform soc:mem_dump: assigned reserved memory node mem_dump_region

[    0.112655] platform 5c00000.qcom,ssc: assigned reserved memory node pil_slpi_region@88c00000

[    0.113778] platform 88a7000.msm_tspp: assigned reserved memory node qseecom_region

[    0.123235] msm_watchdog 17c10000.qcom,wdt: wdog absent resource not present

[    0.123381] msm_watchdog 17c10000.qcom,wdt: MSM Watchdog Initialized

[    0.124650] Unable to find DT property: qcom,msm-imem-download_mode

[    0.125290] Unable to find DT property: qcom,msm-imem-emergency_download_mode

[    0.130591] msm-dcc 1023000.dcc_v2: DCC list passed 3

[    0.130781] msm-dcc 1023000.dcc_v2: All values written to enable.

[    0.131138] msm-dcc 1023000.dcc_v2: DCC list passed 6

[    0.131361] msm-dcc 1023000.dcc_v2: All values written to enable.

[    0.131775] msm-dcc 1023000.dcc_v2: DCC list passed 7

[    0.131997] msm-dcc 1023000.dcc_v2: All values written to enable.

[    0.132420] msm-dcc 1023000.dcc_v2: Failed to add DCC data in Minidump

[    0.132876] sps:sps is ready.

[    0.133063] spmi spmi-0: PMIC arbiter version v5 (0x50010000)

[    0.134298] pm8150a_s3_mmcx_sup_level: regulator get failed, ret=-517

[    0.134437] pm8150_s3_level: supplied by pm8150a_s3_level

[    0.134539] pm8150_s3_level_ao: supplied by pm8150a_s3_level_ao

[    0.134914] pm8150a_s3_mmcx_sup_level: supplied by pm8150_s3_mmcx_sup_level

[    0.137128] AMOLED: qpnp_amoled_parse_dt: Unknown peripheral type 0x0

[    0.137137] qcom,qpnp-amoled-regulator c440000.qcom,spmi:qcom,pm8150l@5:qcom,amoled: Failed to parse DT params rc=-22

[    0.137150] qcom,qpnp-amoled-regulator: probe of c440000.qcom,spmi:qcom,pm8150l@5:qcom,amoled failed with error -22

[    0.137649] spmi spmi-0: pmic_arb_wait_for_done: transaction failed (0x3)

[    0.139147] pm8150a_s4_level: supplied by pm8150a_s3_mmcx_sup_level

[    0.139394] pm8150a_s4_level_ao: supplied by pm8150a_s3_level_ao

[    0.155909] MSM Memory Dump base table set up

[    0.155919] MSM Memory Dump apps data table set up

[    0.162449] cryptd: max_cpu_qlen set to 1000

[    0.162759] vServices Framework 1.0

[    0.164457] gdsc af03000.qcom,gdsc: Linked as a consumer to regulator.31

[    0.164498] gdsc af03000.qcom,gdsc: Dropping the link to regulator.31

[    0.164646] gdsc 3d9106c.qcom,gdsc: Linked as a consumer to regulator.4

[    0.164713] gpu_cx_gdsc: supplied by pm8150_s3_level

[    0.164902] gdsc 3d9100c.qcom,gdsc: Linked as a consumer to regulator.30

[    0.164968] gpu_gx_gdsc: supplied by pm8150a_s1_level

[    0.165172] gdsc abf0d18.qcom,gdsc: Linked as a consumer to regulator.31

[    0.165194] gdsc abf0d18.qcom,gdsc: Dropping the link to regulator.31

[    0.165292] gdsc abf0bf8.qcom,gdsc: Linked as a consumer to regulator.31

[    0.165310] gdsc abf0bf8.qcom,gdsc: Dropping the link to regulator.31

[    0.165405] gdsc abf0d98.qcom,gdsc: Linked as a consumer to regulator.31

[    0.165423] gdsc abf0d98.qcom,gdsc: Dropping the link to regulator.31

[    0.165507] gdsc abf0c98.qcom,gdsc: Linked as a consumer to regulator.31

[    0.165525] gdsc abf0c98.qcom,gdsc: Dropping the link to regulator.31

[    0.166283] qmp-aop-clk soc:qcom,aopclk: Registered clocks with AOP

[    0.166854] gcc-kona 100000.qcom,gcc: Linked as a consumer to regulator.31

[    0.166878] gcc-kona 100000.qcom,gcc: Linked as a consumer to regulator.4

[    0.166907] gcc-kona 100000.qcom,gcc: Linked as a consumer to regulator.5

[    0.197775] gcc-kona 100000.qcom,gcc: Registered GCC clocks

[    0.198008] gpu_cc-kona 3d90000.qcom,gpucc: Linked as a consumer to regulator.4

[    0.198032] gpu_cc-kona 3d90000.qcom,gpucc: Linked as a consumer to regulator.1

[    0.203642] gpu_cc-kona 3d90000.qcom,gpucc: Registered GPU CC clocks

[    0.203859] npu_cc-kona 9980000.qcom,npucc: Linked as a consumer to regulator.4

[    0.225451] npu_cc-kona 9980000.qcom,npucc: Registered NPU_CC clocks

[    0.225721] video_cc-kona abf0000.qcom,videocc: Linked as a consumer to regulator.1

[    0.225748] video_cc-kona abf0000.qcom,videocc: Linked as a consumer to regulator.31

[    0.225754] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.

[    0.225760] video_cc-kona abf0000.qcom,videocc: Unable to register for bw voting

[    0.225790] video_cc-kona abf0000.qcom,videocc: Dropping the link to regulator.31

[    0.225814] video_cc-kona abf0000.qcom,videocc: Dropping the link to regulator.1

[    0.228356] Minidump: Enabled with max number of regions 200

[    0.228631] socinfo_init: New IDs added! ID => CPU mapping needs an update.

[    0.228855] KPI: Bootloader start count = 585969

[    0.228859] KPI: Bootloader end count = 611916

[    0.228863] KPI: Bootloader display count = 1134691140

[    0.228868] KPI: Bootloader load kernel count = 3372

[    0.228874] KPI: Kernel MPM timestamp = 628161

[    0.228878] KPI: Kernel MPM Clock frequency = 32768

[    0.228892] socinfo_print: v0.15, id=481, ver=2.1, raw_id=342, raw_ver=0, hw_plat=8, hw_plat_ver=65536

[    0.228892]  accessory_chip=0, hw_plat_subtype=0, pmic_model=65566, pmic_die_revision=196608 foundry_id=1 serial_number=365242794 num_pmics=4 chip_family=0x5d raw_device_family=0x6 raw_device_number=0x8 nproduct_id=0x412 num_clusters=0x1 ncluster_array_offset=0xb0 num_defective_parts=0xf ndefective_parts_array_offset=0xb4 nmodem_supported=0x0

[    0.228899] msm_bus_fabric_rpmh_init_driver

[    0.228977] msm_bus: Probe started

[    0.229404] msm_bus_device 16e0000.ad-hoc-bus: Bus type is missing

[    0.229420] msm_bus_device 16e0000.ad-hoc-bus: Bus type is missing

[    0.229472] msm_bus_device 16e0000.ad-hoc-bus: Bus type is missing

[    0.231153] msm_bus: DT Parsing complete

[    0.232630] msm_bus_fab_init_noc_ops: Invalid Bus type

[    0.232661] msm_bus_fab_init_noc_ops: Invalid Bus type

[    0.232803] msm_bus_fab_init_noc_ops: Invalid Bus type

[    0.259894] Built 1 zonelists, mobility grouping on.  Total pages: 1435411

[    0.306956] mem-offline: Added memory blocks ranging from mem16 - mem19

[    0.308754] arm-smmu 3da0000.kgsl-smmu: Linked as a consumer to regulator.69

[    0.308820] arm-smmu 3da0000.kgsl-smmu:      non-coherent table walk

[    0.308825] arm-smmu 3da0000.kgsl-smmu:      (IDR0.CTTW overridden by FW configuration)

[    0.308832] arm-smmu 3da0000.kgsl-smmu:      stream matching with 6 register groups

[    0.310122] register_client_adhoc:find path.src 161 dest 627

[    0.310274] register_client_adhoc:Client handle 1 apps_smmu

[    0.310345] arm-smmu 15000000.apps-smmu:     non-coherent table walk

[    0.310352] arm-smmu 15000000.apps-smmu:     (IDR0.CTTW overridden by FW configuration)

[    0.310358] arm-smmu 15000000.apps-smmu:     stream matching with 87 register groups

[    0.310939] register_client_adhoc:find path.src 161 dest 627

[    0.311048] register_client_adhoc:Client handle 2 apps_smmu

[    0.311156] register_client_adhoc:find path.src 161 dest 627

[    0.311262] register_client_adhoc:Client handle 3 apps_smmu

[    0.311379] qsmmuv500-tbu 1518d000.mnoc_hf_0_tbu: Linked as a consumer to regulator.65

[    0.311401] register_client_adhoc:find path.src 22 dest 773

[    0.311458] register_client_adhoc:Client handle 4 mnoc_hf_0_tbu

[    0.311570] qsmmuv500-tbu 15191000.mnoc_hf_1_tbu: Linked as a consumer to regulator.66

[    0.311590] register_client_adhoc:find path.src 22 dest 773

[    0.311640] register_client_adhoc:Client handle 5 mnoc_hf_1_tbu

[    0.311737] register_client_adhoc:find path.src 154 dest 10070

[    0.311780] register_client_adhoc:Client handle 6 apps_smmu

[    0.311870] register_client_adhoc:find path.src 154 dest 10070

[    0.311907] register_client_adhoc:Client handle 7 apps_smmu

[    0.312002] register_client_adhoc:find path.src 161 dest 627

[    0.312129] register_client_adhoc:Client handle 8 apps_smmu

[    0.312241] register_client_adhoc:find path.src 161 dest 627

[    0.312349] register_client_adhoc:Client handle 9 apps_smmu

[    0.312459] qsmmuv500-tbu 151a5000.mnoc_sf_0_tbu: Linked as a consumer to regulator.67

[    0.312479] register_client_adhoc:find path.src 137 dest 772

[    0.312535] register_client_adhoc:Client handle 10 mnoc_sf_0_tbu

[    0.312641] qsmmuv500-tbu 151a9000.mnoc_sf_1_tbu: Linked as a consumer to regulator.68

[    0.312660] register_client_adhoc:find path.src 137 dest 772

[    0.312709] register_client_adhoc:Client handle 11 mnoc_sf_1_tbu

[    0.313021] Error: Driver 'arm-smmu' is already registered, aborting...

[    0.313052] vgaarb: loaded

[    0.313188] SCSI subsystem initialized

[    0.313249] usbcore: registered new interface driver usbfs

[    0.313267] usbcore: registered new interface driver hub

[    0.313383] usbcore: registered new device driver usb

[    0.313516] usb_phy_generic soc:usb_nop_phy: soc:usb_nop_phy supply vcc not found, using dummy regulator

[    0.313548] usb_phy_generic soc:usb_nop_phy: Linked as a consumer to regulator.0

[    0.313906] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8150@0:qcom,power-on@800: PMIC@SID0 Power-on reason: Triggered from Hard Reset and 'cold' boot

[    0.313933] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8150@0:qcom,power-on@800: PMIC@SID0: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM Controlled Shutdown)

[    0.314062] input: qpnp_pon as /devices/platform/soc/c440000.qcom,spmi/spmi-0/spmi0-00/c440000.qcom,spmi:qcom,pm8150@0:qcom,power-on@800/input/input0

[    0.314363] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8150l@4:qcom,power-on@800: PMIC@SID4 Power-on reason: Triggered from PON1 (Secondary PMIC) and 'cold' boot

[    0.314389] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8150l@4:qcom,power-on@800: PMIC@SID4: Power-off reason: Triggered from SOFT (Software)

[    0.314492] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8009@a:qcom,power-on@800: Invalid PON_PERPH_SUBTYPE 0x07

[    0.314505] qcom,qpnp-power-on: probe of c440000.qcom,spmi:qcom,pm8009@a:qcom,power-on@800 failed with error -22

[    0.314532] spmi spmi-0: pmic_arb_wait_for_done: transaction failed (0x3)

[    0.314539] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pmxprairie@8:qcom,power-on@800: Register read failed, addr=0x0805, rc=-5

[    0.314548] qcom,qpnp-power-on: probe of c440000.qcom,spmi:qcom,pmxprairie@8:qcom,power-on@800 failed with error -5

[    0.314597] media: Linux media interface: v0.10

[    0.314611] videodev: Linux video capture interface: v2.00

[    0.314630] pps_core: LinuxPPS API ver. 1 registered

[    0.314635] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>

[    0.314646] PTP clock support registered

[    0.318955] virt zone: sensor[gpuss-1-usr] read error:-22

[    0.318963] thermal thermal_zone25: failed to read out thermal zone (-22)

[    0.320503] EDAC MC: Ver: 3.0.0

[    0.326066] cpufreq: driver qcom-cpufreq-hw up and running

[    0.326414] platform soc:qcom,ion:qcom,ion-heap@22: assigned reserved memory node sdsp_region

[    0.326446] platform soc:qcom,ion:qcom,ion-heap@26: assigned reserved memory node user_contig_region

[    0.326463] platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory node qseecom_region

[    0.326479] platform soc:qcom,ion:qcom,ion-heap@19: assigned reserved memory node qseecom_ta_region

[    0.326495] platform soc:qcom,ion:qcom,ion-heap@13: assigned reserved memory node sp_region

[    0.326511] platform soc:qcom,ion:qcom,ion-heap@10: assigned reserved memory node secure_display_region

[    0.326740] ION heap system created

[    0.326823] ION heap adsp created at 0x00000000eac00000 with size 800000

[    0.326827] ION heap secure_heap created

[    0.326831] ION heap user_contig created at 0x00000000fec00000 with size 1000000

[    0.326833] ION heap qsecom created at 0x00000000eb400000 with size 1400000

[    0.326836] ION heap qsecom_ta created at 0x00000000fbc00000 with size 1000000

[    0.326839] ION heap spss created at 0x00000000ecc00000 with size 1000000

[    0.326842] ION heap secure_display created at 0x00000000f1800000 with size a400000

[    0.362158] platform soc:qcom,ion:qcom,ion-heap@14: ion_secure_carveout: creating heap@0x8bf00000, size 0x4600000

[    0.362164] ION heap secure_carveout created

[    0.363037] PMIC@SID4: PM8150L v3.0 options: 0, 0, 0, 0

[    0.363128] PMIC@SID10: (null) v3.0 options: 0, 0, 0, 0

[    0.363567] register_client_adhoc:find path.src 90 dest 770

[    0.363697] register_client_adhoc:find path.src 129 dest 512

[    0.363720] register_client_adhoc:find path.src 90 dest 585

[    0.363795] register_client_adhoc:find path.src 1 dest 676

[    0.363866] register_client_adhoc:find path.src 143 dest 777

[    0.363888] register_client_adhoc:Client handle 12 ipa

[    0.365301] ipa 1e00000.qcom,ipa:ipa_smmu_ap: Linked as a consumer to 15000000.apps-smmu

[    0.369676] iommu: Adding device 1e00000.qcom,ipa:ipa_smmu_ap to group 0

[    0.369913] ipa 1e00000.qcom,ipa:ipa_smmu_wlan: Linked as a consumer to 15000000.apps-smmu

[    0.374401] iommu: Adding device 1e00000.qcom,ipa:ipa_smmu_wlan to group 1

[    0.374783] ipa 1e00000.qcom,ipa:ipa_smmu_uc: Linked as a consumer to 15000000.apps-smmu

[    0.379065] iommu: Adding device 1e00000.qcom,ipa:ipa_smmu_uc to group 2

[    0.379322] ipa 1e00000.qcom,ipa:ipa_smmu_11ad: Linked as a consumer to 15000000.apps-smmu

[    0.383954] iommu: Adding device 1e00000.qcom,ipa:ipa_smmu_11ad to group 3

[    0.385657] devfreq-qcom-fw 18590000.qcom,devfreq-l3:qcom,cpu0-cpu-l3-lat: Devfreq QCOM Firmware dev registered.

[    0.385978] devfreq-qcom-fw 18590000.qcom,devfreq-l3:qcom,cpu4-cpu-l3-lat: Devfreq QCOM Firmware dev registered.

[    0.386269] devfreq-qcom-fw 18590000.qcom,devfreq-l3:qcom,cpu7-cpu-l3-lat: Devfreq QCOM Firmware dev registered.

[    0.386559] devfreq-qcom-fw 18590000.qcom,devfreq-l3:qcom,cdsp-cdsp-l3-lat: Devfreq QCOM Firmware dev registered.

[    0.386566] devfreq-qcom-fw 18590000.qcom,devfreq-l3: Devfreq QCOM Firmware parent dev inited.

[    0.387031] SDAM base=0xb100 size=128 registered successfully

[    0.387077] Advanced Linux Sound Architecture Driver Initialized.

[    0.387334] Bluetooth: Core ver 2.22

[    0.387348] NET: Registered protocol family 31

[    0.387350] Bluetooth: HCI device and connection manager initialized

[    0.387355] Bluetooth: HCI socket layer initialized

[    0.387360] Bluetooth: L2CAP socket layer initialized

[    0.387367] Bluetooth: SCO socket layer initialized

[    0.387376] NetLabel: Initializing

[    0.387378] NetLabel:  domain hash size = 128

[    0.387381] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO

[    0.387400] NetLabel:  unlabeled traffic allowed by default

[    0.387439] pcie:pcie_init.

[    0.388468] register_client_adhoc:find path.src 45 dest 512

[    0.388614] register_client_adhoc:Client handle 13 pcie0

[    0.388730] pci-msm 1c00000.qcom,pcie: 1c00000.qcom,pcie supply vreg-3p3 not found, using dummy regulator

[    0.388755] pci-msm 1c00000.qcom,pcie: Linked as a consumer to regulator.0

[    0.388779] pci-msm 1c00000.qcom,pcie: Linked as a consumer to regulator.18

[    0.388795] pci-msm 1c00000.qcom,pcie: Linked as a consumer to regulator.13

[    0.388820] pci-msm 1c00000.qcom,pcie: Linked as a consumer to regulator.4

[    0.388849] pci-msm 1c00000.qcom,pcie: Linked as a consumer to regulator.59

[    0.388958] msm_pcie_get_reg: PCIe: RC0: no tcsr resource found.

[    0.388961] msm_pcie_get_reg: PCIe: RC0: no rumi resource found.

[    0.389201] register_client_adhoc:find path.src 100 dest 512

[    0.389250] register_client_adhoc:Client handle 14 pcie1

[    0.389293] pci-msm 1c08000.qcom,pcie: 1c08000.qcom,pcie supply vreg-3p3 not found, using dummy regulator

[    0.389306] pci-msm 1c08000.qcom,pcie: Linked as a consumer to regulator.0

[    0.389319] pci-msm 1c08000.qcom,pcie: Linked as a consumer to regulator.18

[    0.389331] pci-msm 1c08000.qcom,pcie: Linked as a consumer to regulator.13

[    0.389347] pci-msm 1c08000.qcom,pcie: Linked as a consumer to regulator.4

[    0.389365] pci-msm 1c08000.qcom,pcie: Linked as a consumer to regulator.60

[    0.389421] msm_pcie_get_reg: PCIe: RC1: no tcsr resource found.

[    0.389424] msm_pcie_get_reg: PCIe: RC1: no rumi resource found.

[    0.389429] msm_pcie_probe: PCIe: RC1 could not get pinctrl sleep state1

[    0.389506] Can request power-phy-gpio

[    0.389506] !

[    0.389521] Can request power_lan_gpio

[    0.389521] !

[    0.389538] Can request phy_en_gpio

[    0.389538] !

[    0.389554] Can request phy_rst_gpio

[    0.389554] !

[    0.404055] Can request lan_rst_gpio

[    0.404055] !

[    0.404084] msm_pcie_enable: PCIe: Assert the reset of endpoint of RC1.

[    0.407511] msm_pcie_enable: PCIe: RC1: PCIE20_PARF_INT_ALL_MASK: 0x7f80d202

[    0.409615] pcie_phy_init: PCIe RC1 PHY is ready!

[    0.419623] msm_pcie_enable: PCIe: Release the reset of endpoint of RC1.

[    0.446267] msm_pcie_link_train: PCIe RC1 link initialized

[    0.446765] pci-msm 1c08000.qcom,pcie: host bridge /soc/qcom,pcie@1c08000 ranges:

[    0.446775] pci-msm 1c08000.qcom,pcie:   No bus range found for /soc/qcom,pcie@1c08000, using [bus 00-ff]

[    0.446790] pci-msm 1c08000.qcom,pcie:    IO 0x40200000..0x402fffff -> 0x40200000

[    0.446799] pci-msm 1c08000.qcom,pcie:   MEM 0x40300000..0x5fffffff -> 0x40300000

[    0.447070] pci-msm 1c08000.qcom,pcie: PCI host bridge to bus 0001:00

[    0.447076] pci_bus 0001:00: root bus resource [bus 00-ff]

[    0.447081] pci_bus 0001:00: root bus resource [io  0x0000-0xfffff] (bus address [0x40200000-0x402fffff])

[    0.447087] pci_bus 0001:00: root bus resource [mem 0x40300000-0x5fffffff]

[    0.456035] pci 0001:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring

[    0.462285] pci 0001:00:00.0: BAR 8: assigned [mem 0x40300000-0x405fffff]

[    0.462291] pci 0001:00:00.0: BAR 9: assigned [mem 0x40600000-0x407fffff 64bit pref]

[    0.462295] pci 0001:00:00.0: BAR 0: assigned [mem 0x40800000-0x40800fff 64bit]

[    0.462326] pci 0001:00:00.0: BAR 7: assigned [io  0x1000-0x1fff]

[    0.462334] pci 0001:01:00.0: BAR 0: assigned [mem 0x40300000-0x40301fff 64bit]

[    0.462395] pci 0001:01:00.0: BAR 2: assigned [mem 0x40302000-0x403020ff 64bit]

[    0.462457] pci 0001:01:00.0: BAR 4: assigned [mem 0x40302100-0x403021ff 64bit]

[    0.462519] pci 0001:00:00.0: PCI bridge to [bus 01]

[    0.462525] pci 0001:00:00.0:   bridge window [io  0x1000-0x1fff]

[    0.462541] pci 0001:00:00.0:   bridge window [mem 0x40300000-0x405fffff]

[    0.462553] pci 0001:00:00.0:   bridge window [mem 0x40600000-0x407fffff 64bit pref]

[    0.462715] pci-msm-rc 0001:00:00.0: Linked as a consumer to 15000000.apps-smmu

[    0.463206] iommu: Adding device 0001:00:00.0 to group 4

[    0.463667] msm_pcie_probe: RC1 is enabled in bootup

[    0.464276] register_client_adhoc:find path.src 22 dest 512

[    0.464457] register_client_adhoc:find path.src 23 dest 512

[    0.464528] register_client_adhoc:Client handle 15 bus-proxy-client

[    0.465207] qupv3_geni_se 9c0000.qcom,qupv3_0_geni_se: Linked as a consumer to 15000000.apps-smmu

[    0.469527] iommu: Adding device 9c0000.qcom,qupv3_0_geni_se to group 5

[    0.469805] qupv3_geni_se ac0000.qcom,qupv3_1_geni_se: Linked as a consumer to 15000000.apps-smmu

[    0.474258] iommu: Adding device ac0000.qcom,qupv3_1_geni_se to group 6

[    0.474584] qupv3_geni_se 8c0000.qcom,qupv3_2_geni_se: Linked as a consumer to 15000000.apps-smmu

[    0.478994] iommu: Adding device 8c0000.qcom,qupv3_2_geni_se to group 7

[    0.479325] gdsc af03000.qcom,gdsc: Linked as a consumer to regulator.31

[    0.479405] register_client_adhoc:find path.src 1 dest 590

[    0.479584] register_client_adhoc:Client handle 16 mdss_core_gdsc_ahb

[    0.479674] msm-bus-type slv-qhs-display-cfg: Linked as a consumer to regulator.31

[    0.479868] mdss_core_gdsc: supplied by pm8150a_s4_level

[    0.480251] gdsc abf0d18.qcom,gdsc: Linked as a consumer to regulator.31

[    0.480269] register_client_adhoc:find path.src 1 dest 596

[    0.480351] register_client_adhoc:Client handle 17 mvs0_gdsc_ahb

[    0.480406] msm-bus-type slv-qhs-venus-cfg: Linked as a consumer to regulator.31

[    0.480514] mvs0_gdsc: supplied by pm8150a_s4_level

[    0.480585] gdsc abf0bf8.qcom,gdsc: Linked as a consumer to regulator.31

[    0.480597] register_client_adhoc:find path.src 1 dest 596

[    0.480671] register_client_adhoc:Client handle 18 mvs0c_gdsc_ahb

[    0.480790] mvs0c_gdsc: supplied by pm8150a_s4_level

[    0.480863] gdsc abf0d98.qcom,gdsc: Linked as a consumer to regulator.31

[    0.480875] register_client_adhoc:find path.src 1 dest 596

[    0.480947] register_client_adhoc:Client handle 19 mvs1_gdsc_ahb

[    0.481062] mvs1_gdsc: supplied by pm8150a_s4_level

[    0.481130] gdsc abf0c98.qcom,gdsc: Linked as a consumer to regulator.31

[    0.481141] register_client_adhoc:find path.src 1 dest 596

[    0.481212] register_client_adhoc:Client handle 20 mvs1c_gdsc_ahb

[    0.481337] mvs1c_gdsc: supplied by pm8150a_s4_level

[    0.481428] disp_cc-kona af00000.qcom,dispcc: Linked as a consumer to regulator.31

[    0.481437] register_client_adhoc:find path.src 1 dest 590

[    0.481506] register_client_adhoc:Client handle 21 clk_dispcc_debugfs

[    0.484111] disp_cc-kona af00000.qcom,dispcc: Registered Display CC clocks

[    0.484175] video_cc-kona abf0000.qcom,videocc: Linked as a consumer to regulator.1

[    0.484186] video_cc-kona abf0000.qcom,videocc: Linked as a consumer to regulator.31

[    0.484195] register_client_adhoc:find path.src 1 dest 596

[    0.484268] register_client_adhoc:Client handle 22 clk_videocc_debugfs

[    0.485255] video_cc-kona abf0000.qcom,videocc: Registered Video CC clocks

[    0.485821] clocksource: Switched to clocksource arch_sys_counter

[    0.525736] VFS: Disk quotas dquot_6.6.0

[    0.525762] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)

[    0.525948] register_client_adhoc:find path.src 1 dest 589

[    0.525983] register_client_adhoc:Failed to find path.src 1 dest 589

[    0.527130] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL

[    0.527136] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 0 PLL PLL SSC enabled

[    0.527267] mdss_pll ae94900.qcom,mdss_dsi_pll: Failed to create ae94900.qcom,mdss_dsi_pll debugfs directory

[    0.527271] mdss_pll ae94900.qcom,mdss_dsi_pll: Failed to create ae94900.qcom,mdss_dsi_pll debugfs directory

[    0.527275] mdss_pll ae94900.qcom,mdss_dsi_pll: Failed to create ae94900.qcom,mdss_dsi_pll debugfs directory

[    0.527280] mdss_pll ae94900.qcom,mdss_dsi_pll: Failed to create ae94900.qcom,mdss_dsi_pll debugfs directory

[    0.527284] mdss_pll ae94900.qcom,mdss_dsi_pll: Failed to create ae94900.qcom,mdss_dsi_pll debugfs directory

[    0.527288] mdss_pll ae94900.qcom,mdss_dsi_pll: Failed to create ae94900.qcom,mdss_dsi_pll debugfs directory

[    0.539103] dsi_pll_clock_register_7nm: Registered DSI PLL ndx=0, clocks successfully

[    0.539125] mdss_pll_probe: MDSS pll label = MDSS DSI 1 PLL

[    0.539129] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 1 PLL PLL SSC enabled

[    0.539162] mdss_pll ae96900.qcom,mdss_dsi_pll: Failed to create ae96900.qcom,mdss_dsi_pll debugfs directory

[    0.539167] mdss_pll ae96900.qcom,mdss_dsi_pll: Failed to create ae96900.qcom,mdss_dsi_pll debugfs directory

[    0.539171] mdss_pll ae96900.qcom,mdss_dsi_pll: Failed to create ae96900.qcom,mdss_dsi_pll debugfs directory

[    0.539175] mdss_pll ae96900.qcom,mdss_dsi_pll: Failed to create ae96900.qcom,mdss_dsi_pll debugfs directory

[    0.539179] mdss_pll ae96900.qcom,mdss_dsi_pll: Failed to create ae96900.qcom,mdss_dsi_pll debugfs directory

[    0.539182] mdss_pll ae96900.qcom,mdss_dsi_pll: Failed to create ae96900.qcom,mdss_dsi_pll debugfs directory

[    0.550868] dsi_pll_clock_register_7nm: Registered DSI PLL ndx=1, clocks successfully

[    0.550888] mdss_pll_probe: MDSS pll label = MDSS DP PLL

[    0.551534] NET: Registered protocol family 2

[    0.551724] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)

[    0.551738] TCP established hash table entries: 65536 (order: 7, 524288 bytes)

[    0.551823] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)

[    0.552246] TCP: Hash tables configured (established 65536 bind 65536)

[    0.552297] UDP hash table entries: 4096 (order: 5, 131072 bytes)

[    0.552317] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)

[    0.552412] NET: Registered protocol family 1

[    0.552893] register_client_adhoc:find path.src 1 dest 589

[    0.552926] register_client_adhoc:Failed to find path.src 1 dest 589

[    0.553010] Trying to unpack rootfs image as initramfs...

[    0.565294] Freeing initrd memory: 1260K

[    0.565869] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available

[    0.569404] Initialise system trusted keyrings

[    0.569428] workingset: timestamp_bits=45 max_order=21 bucket_order=0

[    0.570338] Registering sdcardfs 0.1

[    0.570385] fuse init (API version 7.27)

[    0.573293] Key type asymmetric registered

[    0.573297] Asymmetric key parser 'x509' registered

[    0.573312] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 241)

[    0.573316] io scheduler noop registered

[    0.573319] io scheduler deadline registered

[    0.573346] io scheduler cfq registered (default)

[    0.573349] io scheduler mq-deadline registered

[    0.573351] io scheduler kyber registered

[    0.573363] io scheduler bfq registered

[    0.574289] Virtual Services transport driver for OKL4 Axons

[    0.578307] gpi_dma 900000.qcom,gpi-dma: Linked as a consumer to 15000000.apps-smmu

[    0.578557] iommu: Adding device 900000.qcom,gpi-dma to group 8

[    0.579027] gpi_dma a00000.qcom,gpi-dma: Linked as a consumer to 15000000.apps-smmu

[    0.579226] iommu: Adding device a00000.qcom,gpi-dma to group 9

[    0.579557] gpi_dma 800000.qcom,gpi-dma: Linked as a consumer to 15000000.apps-smmu

[    0.579742] iommu: Adding device 800000.qcom,gpi-dma to group 10

[    0.580633] kona-llcc 9200000.cache-controller: Failed to create 9200000.cache-controller debugfs directory

[    0.580987] register_client_adhoc:find path.src 125 dest 512

[    0.581154] register_client_adhoc:Client handle 23 scm_pas

[    0.581159] minidump-id not found for ipa_fws

[    0.581181] subsys-pil-tz soc:qcom,ipa_fws: for ipa_fws segments only will be dumped.

[    0.581200] subsys-pil-tz soc:qcom,ipa_fws: for md_ipa_fws segments only will be dumped.

[    0.581255] minidump-id not found for ipa_uc

[    0.581266] subsys-pil-tz soc:qcom,ipa_uc: for ipa_uc segments only will be dumped.

[    0.581278] subsys-pil-tz soc:qcom,ipa_uc: for md_ipa_uc segments only will be dumped.

[    0.581351] subsys-pil-tz 17300000.qcom,lpass: Linked as a consumer to regulator.20

[    0.581365] subsys-pil-tz 17300000.qcom,lpass: Linked as a consumer to regulator.12

[    0.581370] minidump-id not found for adsp

[    0.581566] subsys-pil-tz 8300000.qcom,turing: Linked as a consumer to regulator.4

[    0.581577] register_client_adhoc:find path.src 154 dest 10070

[    0.581592] register_client_adhoc:Client handle 24 pil-cdsp

[    0.581597] minidump-id not found for cdsp

[    0.581774] subsys-pil-tz aab0000.qcom,venus: Linked as a consumer to regulator.75

[    0.581783] register_client_adhoc:find path.src 63 dest 512

[    0.581844] register_client_adhoc:Client handle 25 pil-venus

[    0.581849] minidump-id not found for venus

[    0.581932] subsys-pil-tz 188101c.qcom,spss: Linked as a consumer to regulator.4

[    0.581937] minidump-id not found for spss

[    0.582018] minidump-id not found for cvpss

[    0.582029] subsys-pil-tz abb0000.qcom,cvpss: for cvpss segments only will be dumped.

[    0.582038] subsys-pil-tz abb0000.qcom,cvpss: for md_cvpss segments only will be dumped.

[    0.582071] minidump-id not found for npu

[    0.582081] subsys-pil-tz 9800000.qcom,npu: for npu segments only will be dumped.

[    0.582092] subsys-pil-tz 9800000.qcom,npu: for md_npu segments only will be dumped.

[    0.582118] subsys-restart: __get_smem_state(): Could not get smem-states qcom,force-stop

[    0.582206] subsys-pil-tz 5c00000.qcom,ssc: Linked as a consumer to regulator.20

[    0.582216] subsys-pil-tz 5c00000.qcom,ssc: Linked as a consumer to regulator.12

[    0.582220] minidump-id not found for slpi

[    0.582350] minidump-id not found for a650_zap

[    0.582363] subsys-pil-tz soc:qcom,kgsl-hyp: for a650_zap segments only will be dumped.

[    0.582373] subsys-pil-tz soc:qcom,kgsl-hyp: for md_a650_zap segments only will be dumped.

[    0.583529] input: qbt_key_input as /devices/virtual/input/input1

[    0.584634] msm_geni_serial 998000.qcom,qup_uart: Wakeup byte 0xfd

[    0.584677] msm_geni_serial 998000.qcom,qup_uart: Serial port0 added.FifoSize 64 is_console0

[    0.585188] 998000.qcom,qup_uart: ttyHS0 at MMIO 0x998000 (irq = 274, base_baud = 0) is a MSM

[    0.585383] msm_geni_serial a90000.qcom,qup_uart: Serial port0 added.FifoSize 64 is_console1

[    0.585440] a90000.qcom,qup_uart: ttyMSM0 at MMIO 0xa90000 (irq = 277, base_baud = 0) is a MSM

[    4.608545] console [ttyMSM0] enabled

[    4.612513] msm_geni_serial 880000.qcom,qup_uart: No wakeup IRQ configured

[    4.619611] msm_geni_serial 880000.qcom,qup_uart: Serial port1 added.FifoSize 64 is_console0

[    4.628837] 880000.qcom,qup_uart: ttyHS1 at MMIO 0x880000 (irq = 279, base_baud = 0) is a MSM

[    4.637681] msm_geni_serial_init: Driver initialized

[    4.643006] register_client_adhoc:find path.src 1 dest 618

[    4.643071] register_client_adhoc:Client handle 26 msm-rng-noc

[    4.650079] random: crng init done

[    4.661166] iommu-debug soc:kgsl_iommu_test_device: Linked as a consumer to 3da0000.kgsl-smmu

[    4.670011] iommu: Adding device soc:kgsl_iommu_test_device to group 11

[    4.677095] iommu-debug soc:apps_iommu_test_device: Linked as a consumer to 15000000.apps-smmu

[    4.685996] iommu: Adding device soc:apps_iommu_test_device to group 12

[    4.692963] iommu-debug soc:apps_iommu_coherent_test_device: Linked as a consumer to 15000000.apps-smmu

[    4.702657] iommu: Adding device soc:apps_iommu_coherent_test_device to group 13

[    4.712567] brd: module loaded

[    4.718365] loop: module loaded

[    4.721688] zram: Added device: zram0

[    4.726203] QSEECOM: qseecom_init_control: qseecom.qsee_version = 0x1402000

[    4.733484] QSEECOM: qseecom_retrieve_ce_data: Device does not support PFE

[    4.742999] qce 1de0000.qcedev: Linked as a consumer to 15000000.apps-smmu

[    4.750344] iommu: Adding device 1de0000.qcedev to group 14

[    4.756287] register_client_adhoc:find path.src 125 dest 512

[    4.756469] register_client_adhoc:Client handle 27 qcedev-noc

[    4.762416] QCE50: __qce_get_device_tree_data: CE operating frequency is not defined, setting to default 100MHZ

[    4.778956] qce 1de0000.qcedev: QTI Crypto 5.5.0 device found @0x1de0000

[    4.785999] sps:BAM 0x0000000001dc4000 is registered.

[    4.786065] sps:BAM 0x0000000001dc4000 (va:0x000000003cff38b9) enabled: ver:0x27, number of pipes:16

[    4.800831] QCE50: qce_sps_init:  QTI MSM CE-BAM at 0x0000000001dc4000 irq 39

[    4.808435] qce 1de0000.qcedev:qcom_cedev_ns_cb: Linked as a consumer to 15000000.apps-smmu

[    4.817309] iommu: Adding device 1de0000.qcedev:qcom_cedev_ns_cb to group 15

[    4.824750] qce 1de0000.qcedev:qcom_cedev_s_cb: Linked as a consumer to 15000000.apps-smmu

[    4.833967] iommu: Adding device 1de0000.qcedev:qcom_cedev_s_cb to group 16

[    4.841502] qcrypto 1de0000.qcrypto: Linked as a consumer to 15000000.apps-smmu

[    4.849256] iommu: Adding device 1de0000.qcrypto to group 17

[    4.855211] register_client_adhoc:find path.src 125 dest 512

[    4.855291] register_client_adhoc:Client handle 28 qcrypto-noc

[    4.861193] QCE50: __qce_get_device_tree_data: CE operating frequency is not defined, setting to default 100MHZ

[    4.877790] qcrypto 1de0000.qcrypto: QTI Crypto 5.5.0 device found @0x1de0000

[    4.885306] QCE50: qce_sps_init:  QTI MSM CE-BAM at 0x0000000001dc4000 irq 39

[    4.892841] qcrypto 1de0000.qcrypto: qcrypto-ecb-aes

[    4.898045] qcrypto 1de0000.qcrypto: qcrypto-cbc-aes

[    4.903255] qcrypto 1de0000.qcrypto: qcrypto-ctr-aes

[    4.908466] qcrypto 1de0000.qcrypto: qcrypto-ecb-des

[    4.913665] qcrypto 1de0000.qcrypto: qcrypto-cbc-des

[    4.918863] qcrypto 1de0000.qcrypto: qcrypto-ecb-3des

[    4.924171] qcrypto 1de0000.qcrypto: qcrypto-cbc-3des

[    4.929466] qcrypto 1de0000.qcrypto: qcrypto-xts-aes

[    4.934661] qcrypto 1de0000.qcrypto: qcrypto-sha1

[    4.939604] qcrypto 1de0000.qcrypto: qcrypto-sha256

[    4.944715] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes

[    4.951250] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des

[    4.957800] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des

[    4.964426] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes

[    4.971139] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des

[    4.977865] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des

[    4.984668] qcrypto 1de0000.qcrypto: qcrypto-hmac-sha1

[    4.990049] qcrypto 1de0000.qcrypto: qcrypto-hmac-sha256

[    4.995621] qcrypto 1de0000.qcrypto: qcrypto-aes-ccm

[    5.000820] qcrypto 1de0000.qcrypto: qcrypto-rfc4309-aes-ccm

[    5.007484] genirq: irq_chip msmgpio did not update eff. affinity mask of irq 347

[    5.015413] usb_extcon_detect_cable@108: vbus=1

[    5.020504] ufshcd-qcom 1d84000.ufshc: no vccq2-voltage-level property.

[    5.027390] ufshcd-qcom 1d84000.ufshc: Linked as a consumer to regulator.62

[    5.034751] ufshcd-qcom 1d84000.ufshc: Linked as a consumer to regulator.28

[    5.041946] ufshcd-qcom 1d84000.ufshc: Linked as a consumer to regulator.16

[    5.049126] ufshcd-qcom 1d84000.ufshc: Linked as a consumer to regulator.7

[    5.056525] register_client_adhoc:find path.src 123 dest 512

[    5.056614] register_client_adhoc:find path.src 1 dest 757

[    5.062525] register_client_adhoc:Client handle 29 ufshc_mem

[    5.068231] ufs_qcom_phy_qmp_v4 1d87000.ufsphy_mem: Linked as a consumer to regulator.18

[    5.082409] ufs_qcom_phy_qmp_v4 1d87000.ufsphy_mem: Linked as a consumer to regulator.13

[    5.090756] ufshcd-qcom 1d84000.ufshc: Linked as a consumer to regulator.36

[    5.098525] scsi host0: ufshcd

[    5.112257] SCSI Media Changer driver v0.25

[    5.117354] spmi spmi-1: pmic_arb_debug_wait_for_done: transaction failed (0x3)

[    5.125434] spmi spmi-1: pmic_arb_debug_wait_for_done: transaction failed (0x3)

[    5.129275] ufshcd-qcom 1d84000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0

[    5.133231] spmi spmi-1: SPMI PMIC arbiter debug bus controller added

[    5.152535] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)

[    5.159492] libphy: Fixed MDIO Bus: probed

[    5.163738] tun: Universal TUN/TAP device driver, 1.6

[    5.169082] sky2: driver version 1.30

[    5.172935] lan743x 0001:01:00.0: Linked as a consumer to 15000000.apps-smmu

[    5.180275] iommu: Adding device 0001:01:00.0 to group 3

[    5.183531] ufshcd-qcom 1d84000.ufshc: ufshcd_needs_reinit: Re-init UFS host to use proper PHY settings for the UFS device. This can be avoided by setting the force-g4 in DT

[    5.185953] ethernet: enter lan743x_pcidev_probe  - lan743x

[    5.186039] pci-msm-rc 0001:00:00.0: enabling device (0006 -> 0007)

[    5.213971] lan743x 0001:01:00.0: enabling device (0000 -> 0002)

[    5.220258] lan743x 0001:01:00.0 (unnamed net_device) (uninitialized): PCI: Vendor ID = 0x1055, Device ID = 0x7431

[    5.230356] ufshcd-qcom 1d84000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0

[    5.231003] lan743x 0001:01:00.0 (unnamed net_device) (uninitialized): ID_REV = 0x74310011, FPGA_REV = 0.0

[    5.293145] ufshcd-qcom 1d84000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[4, 4], lane[2, 2], pwr[FAST MODE, FAST MODE], rate = 1

[    5.305451] ufshcd-qcom 1d84000.ufshc: ufshcd_wb_config: Write Booster Configured

[    5.313522] scsi 0:0:0:49488: Well-known LUN    SKhynix  HN8T05BZGKX015   A043 PQ: 0 ANSI: 6

[    5.323182] scsi 0:0:0:49476: Well-known LUN    SKhynix  HN8T05BZGKX015   A043 PQ: 0 ANSI: 6

[    5.332701] scsi 0:0:0:49456: Well-known LUN    SKhynix  HN8T05BZGKX015   A043 PQ: 0 ANSI: 6

[    5.346593] scsi 0:0:0:0: Direct-Access     SKhynix  HN8T05BZGKX015   A043 PQ: 0 ANSI: 6

[    5.353890] lan743x 0001:01:00.0 (unnamed net_device) (uninitialized): MAC address set to 36:7c:7c:00:00:0f

[    5.355781] scsi 0:0:0:1: Direct-Access     SKhynix  HN8T05BZGKX015   A043 PQ: 0 ANSI: 6

[    5.374033] scsi 0:0:0:2: Direct-Access     SKhynix  HN8T05BZGKX015   A043 PQ: 0 ANSI: 6

[    5.383182] scsi 0:0:0:3: Direct-Access     SKhynix  HN8T05BZGKX015   A043 PQ: 0 ANSI: 6

[    5.392309] scsi 0:0:0:4: Direct-Access     SKhynix  HN8T05BZGKX015   A043 PQ: 0 ANSI: 6

[    5.401429] scsi 0:0:0:5: Direct-Access     SKhynix  HN8T05BZGKX015   A043 PQ: 0 ANSI: 6

[    5.410689] sd 0:0:0:0: Power-on or device reset occurred

[    5.416355] sd 0:0:0:1: Power-on or device reset occurred

[    5.421995] sd 0:0:0:2: Power-on or device reset occurred

[    5.427613] sd 0:0:0:3: Power-on or device reset occurred

[    5.433974] sd 0:0:0:5: Power-on or device reset occurred

[    5.439616] sd 0:0:0:4: Power-on or device reset occurred

[    5.446674] sd 0:0:0:3: [sdd] Write Protect is off

[    5.446786] sd 0:0:0:0: [sda] Write Protect is off

[    5.446804] sd 0:0:0:1: [sdb] Write Protect is off

[    5.446871] sd 0:0:0:2: [sdc] Write Protect is off

[    5.447176] sd 0:0:0:1: [sdb] Optimal transfer size 524288 bytes

[    5.447193] sd 0:0:0:4: [sde] Write Protect is off

[    5.447432] sd 0:0:0:4: [sde] Optimal transfer size 524288 bytes

[    5.447541] sd 0:0:0:2: [sdc] Optimal transfer size 524288 bytes

[    5.449741]  sdb: sdb1 sdb2

[    5.450331]  sde: sde1 sde2 sde3 sde4 sde5 sde6 sde7 sde8 sde9 sde10 sde11 sde12 sde13 sde14 sde15 sde16 sde17 sde18 sde19 sde20 sde21 sde22 sde23 sde24 sde25 sde26 sde27 sde28 sde29 sde30 sde31 sde32 sde33 sde34 sde35 sde36 sde37 sde38 sde39 sde40 sde41 sde42 sde43 sde44 sde45 sde46 sde47 sde48 sde49 sde50 sde51 sde52 sde53 sde54 sde55 sde56 sde57 sde58 sde59 sde60 sde61

[    5.451000]  sdc: sdc1 sdc2

[    5.451920] sd 0:0:0:3: [sdd] Optimal transfer size 524288 bytes

[    5.460930] sd 0:0:0:5: [sdf] Write Protect is off

[    5.461217] sd 0:0:0:5: [sdf] Optimal transfer size 524288 bytes

[    5.463488]  sdf: sdf1 sdf2 sdf3 sdf4 sdf5 sdf6 sdf7 sdf8 sdf9

[    5.463525]  sdd: sdd1 sdd2 sdd3 sdd4

[    5.467371] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes

[    5.513519] mv2112_probe: mdio addr 0x0

[    5.529591]  sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15

[    5.548663] libphy: lan743x-mdiobus-ext: probed

[    5.581473] PPP generic driver version 2.4.2

[    5.585905] PPP BSD Compression module registered

[    5.590766] PPP Deflate Compression module registered

[    5.596005] PPP MPPE Compression module registered

[    5.600959] NET: Registered protocol family 24

[    5.605551] PPTP driver version 0.8.5

[    5.609665] CLD80211: Initializing

[    5.613222] usbcore: registered new interface driver r8152

[    5.613305] cnss2 b0000000.qcom,cnss-qca6390: Linked as a consumer to regulator.7

[    5.618902] usbcore: registered new interface driver lan78xx

[    5.632441] usbcore: registered new interface driver asix

[    5.632489] cnss2 b0000000.qcom,cnss-qca6390: Linked as a consumer to regulator.41

[    5.638021] usbcore: registered new interface driver ax88179_178a

[    5.652117] usbcore: registered new interface driver cdc_ether

[    5.652126] cnss2 b0000000.qcom,cnss-qca6390: Linked as a consumer to regulator.9

[    5.658133] usbcore: registered new interface driver net1080

[    5.671680] usbcore: registered new interface driver cdc_subset

[    5.671693] cnss2 b0000000.qcom,cnss-qca6390: Linked as a consumer to regulator.51

[    5.677783] usbcore: registered new interface driver zaurus

[    5.691338] usbcore: registered new interface driver cdc_ncm

[    5.691343] cnss2 b0000000.qcom,cnss-qca6390: Linked as a consumer to regulator.8

[    5.704898] cnss2 b0000000.qcom,cnss-qca6390: Linked as a consumer to regulator.36

[    5.712701] msm-usb-ssphy-qmp 88e8000.ssphy: Linked as a consumer to regulator.29

[    5.720424] msm-usb-ssphy-qmp 88e8000.ssphy: Linked as a consumer to regulator.18

[    5.728189] msm-usb-ssphy-qmp 88eb000.ssphy: Linked as a consumer to regulator.29

[    5.735904] msm-usb-ssphy-qmp 88eb000.ssphy: Linked as a consumer to regulator.18

[    5.743726] msm-usb-hsphy 88e3000.hsphy: Linked as a consumer to regulator.13

[    5.751097] msm-usb-hsphy 88e3000.hsphy: Linked as a consumer to regulator.10

[    5.758484] msm-usb-hsphy 88e3000.hsphy: Linked as a consumer to regulator.21

[    5.765946] msm-usb-hsphy 88e4000.hsphy: Linked as a consumer to regulator.13

[    5.773321] msm-usb-hsphy 88e4000.hsphy: Linked as a consumer to regulator.10

[    5.780690] msm-usb-hsphy 88e4000.hsphy: Linked as a consumer to regulator.21

[    5.788388] msm-dwc3 a600000.ssusb: Linked as a consumer to 15000000.apps-smmu

[    5.796111] iommu: Adding device a600000.ssusb to group 18

[    5.801884] msm-dwc3 a600000.ssusb: Linked as a consumer to regulator.63

[    5.809312] dwc3 a600000.dwc3: Failed to get clk 'ref': -2

[    5.815035] dwc3 a600000.dwc3: changing max_speed on rev 00000000

[    5.822130] register_client_adhoc:find path.src 61 dest 512

[    5.822303] register_client_adhoc:find path.src 61 dest 676

[    5.828160] register_client_adhoc:find path.src 1 dest 583

[    5.833970] register_client_adhoc:Client handle 30 usb0

[    5.839677] msm-dwc3 a600000.ssusb: Could not get usb psy

[    5.850673] msm-dwc3 a600000.ssusb: Linked as a consumer to regulator.78

[    5.850694] msm-dwc3 a600000.ssusb: Could not get usb psy

[    5.857615] msm-dwc3 a800000.ssusb: Linked as a consumer to 15000000.apps-smmu

[    5.870605] msm_pcie_enable: PCIe: Assert the reset of endpoint of RC0.

[    5.870730] iommu: Adding device a800000.ssusb to group 19

[    5.880582] msm_pcie_enable: PCIe: RC0: PCIE20_PARF_INT_ALL_MASK: 0x7f80d202

[    5.883114] msm-dwc3 a800000.ssusb: Linked as a consumer to regulator.64

[    5.892333] pcie_phy_init: PCIe RC0 PHY is ready!

[    5.897605] dwc3 a800000.dwc3: Failed to get clk 'ref': -2

[    5.907699] dwc3 a800000.dwc3: changing max_speed on rev 00000000

[    5.912030] msm_pcie_enable: PCIe: Release the reset of endpoint of RC0.

[    5.914497] register_client_adhoc:find path.src 101 dest 512

[    5.914570] register_client_adhoc:find path.src 101 dest 676

[    5.920183] msm-dwc3 a600000.ssusb: DWC3 exited from low power mode

[    5.937208] msm_pcie_link_train: PCIe RC0 link initialized

[    5.939031] register_client_adhoc:find path.src 1 dest 751

[    5.939085] register_client_adhoc:Client handle 31 usb1

[    5.944798] pci-msm 1c00000.qcom,pcie: host bridge /soc/qcom,pcie@1c00000 ranges:

[    5.950431] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

[    5.955618] pci-msm 1c00000.qcom,pcie:   No bus range found for /soc/qcom,pcie@1c00000, using [bus 00-ff]

[    5.963328] ehci-pci: EHCI PCI platform driver

[    5.970033] pci-msm 1c00000.qcom,pcie:    IO 0x60200000..0x602fffff -> 0x60200000

[    5.979859] ehci-platform: EHCI generic platform driver

[    5.984442] pci-msm 1c00000.qcom,pcie:   MEM 0x60300000..0x63ffffff -> 0x60300000

[    5.992203] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

[    5.997701] pci-msm 1c00000.qcom,pcie: PCI host bridge to bus 0000:00

[    6.004167] msm-dwc3 a800000.ssusb: DWC3 exited from low power mode

[    6.004602] msm-dwc3 a800000.ssusb: DWC3 in low power mode

[    6.005203] ohci-pci: OHCI PCI platform driver

[    6.011560] pci_bus 0000:00: root bus resource [bus 00-ff]

[    6.018200] ohci-platform: OHCI generic platform driver

[    6.024635] pci_bus 0000:00: root bus resource [io  0x100000-0x1fffff] (bus address [0x60200000-0x602fffff])

[    6.030478] usbcore: registered new interface driver cdc_acm

[    6.034857] pci_bus 0000:00: root bus resource [mem 0x60300000-0x63ffffff]

[    6.040504] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters

[    6.040511] usbcore: registered new interface driver usb-storage

[    6.055995] usbcore: registered new interface driver cp210x

[    6.060290] msm-dwc3 a800000.ssusb: DWC3 exited from low power mode

[    6.068882] usbserial: USB Serial support registered for cp210x

[    6.082526] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring

[    6.083278] usbcore: registered new interface driver ftdi_sio

[    6.095449] usbserial: USB Serial support registered for FTDI USB Serial Device

[    6.109774] usbcore: registered new interface driver usb_ehset_test

[    6.123199] usbcore: registered new interface driver lvs

[    6.123591] usbcore: registered new interface driver xpad

[    6.135113] usbcore: registered new interface driver usb_acecad

[    6.146763] usbcore: registered new interface driver aiptek

[    6.146767] usbcore: registered new interface driver gtco

[    6.152501] pci 0000:00:00.0: BAR 8: assigned [mem 0x60300000-0x605fffff]

[    6.158058] usbcore: registered new interface driver hanwang

[    6.165038] pci 0000:00:00.0: BAR 9: assigned [mem 0x60600000-0x607fffff 64bit pref]

[    6.170862] usbcore: registered new interface driver kbtab

[    6.171247] rtc-pm8xxx c440000.qcom,spmi:qcom,pm8150@0:qcom,pm8150_rtc: rtc core: registered pm8xxx_rtc as rtc0

[    6.178843] pci 0000:00:00.0: BAR 0: assigned [mem 0x60800000-0x60800fff 64bit]

[    6.194844] rtc-pm8xxx c440000.qcom,spmi:qcom,pm8150@0:qcom,pm8150_rtc: setting system clock to 1970-01-03 22:07:56 UTC (252476)

[    6.202367] pci 0000:00:00.0: BAR 7: assigned [io  0x100000-0x100fff]

[    6.214327] i2c /dev entries driver

[    6.220854] pci 0000:01:00.0: BAR 0: assigned [mem 0x60300000-0x603fffff 64bit]

[    6.224554] i2c_geni 980000.i2c: Bus frequency is set to 400000Hz

[    6.231982] pci 0000:00:00.0: PCI bridge to [bus 01]

[    6.238430] [MAX975X:max96755g_probe] *ERROR* begin

[    6.243337] pci 0000:00:00.0:   bridge window [io  0x100000-0x100fff]

[    6.243344] pci 0000:00:00.0:   bridge window [mem 0x60300000-0x605fffff]

[    6.248475] max96755g 0-0040: Linked as a consumer to regulator.52

[    6.255078] pci 0000:00:00.0:   bridge window [mem 0x60600000-0x607fffff 64bit pref]

[    6.276422] pci-msm-rc 0000:00:00.0: Linked as a consumer to 15000000.apps-smmu

[    6.284114] iommu: Adding device 0000:00:00.0 to group 20

[    6.289906] cnss_pci 0000:01:00.0: Linked as a consumer to 15000000.apps-smmu

[    6.289912] msm_pcie_enumerate: PCIe: RC0: has already been enumerated.

[    6.300196] iommu: Adding device 0000:01:00.0 to group 21

[    6.309709] cnss_pci 0000:01:00.0: assigned reserved memory node cnss_wlan_region

[    6.317496] cnss2 b0000000.qcom,cnss-qca6390: for wlan segments only will be dumped.

[    6.325501] cnss_pci 0000:01:00.0: BAR 0: assigned [mem 0x60300000-0x603fffff 64bit]

[    6.333497] pci-msm-rc 0000:00:00.0: enabling device (0006 -> 0007)

[    6.339948] cnss_pci 0000:01:00.0: enabling device (0000 -> 0002)

[    6.464288] msm_pcie_disable: PCIe: Assert the reset of endpoint of RC0.

[    6.471871] register_client_adhoc:find path.src 45 dest 512

[    6.472215] register_client_adhoc:Client handle 32 msm-cnss

[    6.478223] cnss: Platform driver probed successfully.

[    6.816116] [MAX975X:max96755x_init] *ERROR* begin

[    6.980357] [MAX975X:max96755x_init] *ERROR* read:752 0x13:ca

[    6.986560] [MAX975X:max96755x_init] *ERROR* read:755 0x13:ca

[    6.992483] [MAX975X:max96755x_init] *ERROR* done

[    7.052254] [MAX975X:max96755x_touch_init] *ERROR* GPIO Pass

[    7.108289] [MAX975X:max96755g_probe] *ERROR* done

[    7.119408] cyttsp7_i2c_adapter 0-0024: cyttsp7_init: INIT CYTTSP RST gpio=1106 and IRQ gpio=1107 ERR gpio=1123

[    7.220074] cyttsp7_i2c_adapter 0-0024: cyttsp7_xres: RESET CYTTSP gpio=1106 r=0

[    7.660884] cyttsp7_i2c_adapter 0-0024: cyttsp7_si_get_test_data_: SCANNING is ENABLED codel=1E

[    7.677029] cyttsp7_i2c_adapter 0-0024: TTSP Protocol Version is 3.2

[    7.727156] cyttsp7_i2c_adapter 0-0024: cyttsp7_startup_: cyttsp7_exit startup rc=0...

[    7.756235] input: cyttsp7_mt as /devices/platform/soc/980000.i2c/i2c-0/0-0024/input/input2

[    7.764863] cyttsp7_i2c_adapter 0-0024: cyttsp7_wakeup: WAKEUP CYTTSP gpio=1107 r=0

[    7.772883] i2c_geni 980000.i2c: i2c error :-107

[    8.288214] i2c_geni 980000.i2c: i2c error :-107

[    8.292989] cyttsp7_i2c_adapter 0-0024: _cyttsp7_awake_device_from_deep_sleep: Queueing startup

[    8.301955] cyttsp7_i2c_adapter 0-0024: _cyttsp7_queue_startup: cyttsp7_startup queued

[    8.400051] cyttsp7_i2c_adapter 0-0024: cyttsp7_xres: RESET CYTTSP gpio=1106 r=0

[    8.840863] cyttsp7_i2c_adapter 0-0024: cyttsp7_si_get_test_data_: SCANNING is ENABLED codel=1E

[    8.856996] cyttsp7_i2c_adapter 0-0024: TTSP Protocol Version is 3.2

[    8.907123] cyttsp7_i2c_adapter 0-0024: cyttsp7_startup_: cyttsp7_exit startup rc=0...

[    8.915592] i2c_geni 994000.i2c: Bus frequency is set to 400000Hz

[    8.922486] i2c_geni a94000.i2c: Bus frequency is set to 400000Hz

[    8.929879] i2c_geni 884000.i2c: Bus frequency is set to 400000Hz

[    8.937205] I2C PMIC: i2c_pmic_probe: I2C PMIC probe successful

[    8.944007] msm_cvp_v4l2 ab00000.qcom,cvp:cvp_non_secure_cb: Linked as a consumer to 15000000.apps-smmu

[    8.953811] iommu: Adding device ab00000.qcom,cvp:cvp_non_secure_cb to group 22

[    8.961420] msm_cvp_v4l2 ab00000.qcom,cvp:cvp_secure_nonpixel_cb: Linked as a consumer to 15000000.apps-smmu

[    8.971974] iommu: Adding device ab00000.qcom,cvp:cvp_secure_nonpixel_cb to group 23

[    8.980062] msm_cvp_v4l2 ab00000.qcom,cvp:cvp_secure_pixel_cb: Linked as a consumer to 15000000.apps-smmu

[    8.990182] iommu: Adding device ab00000.qcom,cvp:cvp_secure_pixel_cb to group 24

[    8.997928] platform ab00000.qcom,cvp:qcom,msm-cvp,mem_cdsp: assigned reserved memory node cdsp_region

[    9.007673] msm_npu 9900000.qcom,msm_npu: Linked as a consumer to 15000000.apps-smmu

[    9.015811] iommu: Adding device 9900000.qcom,msm_npu to group 25

[    9.022142] NPU_INFO: npu_probe: 2505 unable to get qfprom_physical resource

[    9.029414] msm_npu 9900000.qcom,msm_npu: Linked as a consumer to regulator.73

[    9.036853] msm_npu 9900000.qcom,msm_npu: Linked as a consumer to regulator.4

[    9.044274] register_client_adhoc:find path.src 154 dest 512

[    9.044348] register_client_adhoc:find path.src 154 dest 620

[    9.050239] register_client_adhoc:Client handle 33 9900000.qcom,msm_npu

[    9.056070] NPU_INFO: npu_parse_dt_bw: 1832 NPU BW client sets up successfully

[    9.071964] synx: synx device init start

[    9.076059] synx: synx device init success

[    9.080294] usbcore: registered new interface driver uvcvideo

[    9.086201] USB Video Class driver (1.1.1)

[    9.090445] rtc6226 3-0064: Linked as a consumer to regulator.7

[    9.096547] rtc6226 3-0064: Linked as a consumer to regulator.48

[    9.204029] rtc6226: rtc6226_pinctrl_init: target does not use pinctrl

[    9.210741] rtc6226: rtc6226_i2c_probe: rtc6226_pinctrl_init returned -19

[    9.218485] i2c_geni 884000.i2c: i2c error :-107

[    9.223246] SMB1390: smb1390_read: Couldn't read 0x1006

[    9.228623] SMB1390: smb1390_slave_probe: Couldn't find slave SMB1390

[    9.235250] SMB1390: smb1390_probe: Couldn't probe SMB1390 Slave rc=-22

[    9.242056] qcom,smb1390-charger-psy: probe of 884000.i2c:qcom,smb1390_slave@18:qcom,charge_pump_slave failed with error -22

[    9.253815] HL6111R: hl6111r_probe: probe successful

[    9.260743] msm_lmh_dcvs 18591000.qcom,cpufreq-hw:qcom,limits-dcvs: Linked as a consumer to regulator.22

[    9.270492] HL6111R: is_dc_online: DC psy unavailable

[    9.275692] HL6111R: is_dc_online: DC psy unavailable

[    9.280891] HL6111R: is_dc_online: DC psy unavailable

[    9.286104] msm_lmh_dcvs 18591000.qcom,cpufreq-hw:qcom,limits-dcvs: Linked as a consumer to regulator.14

[    9.295919] HL6111R: is_dc_online: DC psy unavailable

[    9.301135] HL6111R: is_dc_online: DC psy unavailable

[    9.301185] device-mapper: uevent: version 1.0.3

[    9.306398] HL6111R: is_dc_online: DC psy unavailable

[    9.311129] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com

[    9.316286] HL6111R: is_dc_online: DC psy unavailable

[    9.316287] HL6111R: is_dc_online: DC psy unavailable

[    9.316288] HL6111R: is_dc_online: DC psy unavailable

[    9.316288] HL6111R: is_dc_online: DC psy unavailable

[    9.345960] bt_dt_parse_vreg_info: qca,bt-vdd-core: is not provided in device tree

[    9.353744] bt_dt_parse_vreg_info: qca,bt-vdd-io: is not provided in device tree

[    9.361366] bt_dt_parse_vreg_info: qca,bt-vdd-xtal: is not provided in device tree

[    9.369145] bt_dt_parse_vreg_info: qca,bt-vdd-pa: is not provided in device tree

[    9.376750] bt_dt_parse_vreg_info: qca,bt-vdd-ldo: is not provided in device tree

[    9.384446] bt_dt_parse_vreg_info: qca,bt-chip-pwd: is not provided in device tree

[    9.392232] bt_dt_parse_clk_info: clocks is not provided in device tree

[    9.399179] EDAC DEVICE0: Giving out device to module soc:kryo-erp controller cache: DEV soc:kryo-erp (INTERRUPT)

[    9.409976] sdhci: Secure Digital Host Controller Interface driver

[    9.416336] sdhci: Copyright(c) Pierre Ossman

[    9.420833] sdhci-pltfm: SDHCI platform and OF driver helper

[    9.427135] hidraw: raw HID events driver (C) Jiri Kosina

[    9.427358] sdhci_msm 8804000.sdhci: core_reset unavailable,err = -2

[    9.427464] tz diag version is 2401000

[    9.427568] scm_call failed: func id 0x7200010b, ret: -1, syscall returns: 0x0, 0x0, 0x0

[    9.427570] scm_call QUERY_ENCR_LOG_FEATURE failed ret -95

[    9.432837] usbcore: registered new interface driver usbhid

[    9.439284] sdhci_msm 8804000.sdhci: Reset data parsing error

[    9.443136] usbhid: USB HID core driver

[    9.451787] register_client_adhoc:find path.src 81 dest 512

[    9.452204] register_client_adhoc:find path.src 1 dest 608

[    9.457141] ashmem: initialized

[    9.462964] register_client_adhoc:Client handle 34 sdhc2

[    9.463067] sdhci_msm 8804000.sdhci: Linked as a consumer to regulator.45

[    9.468778] ipa_ut ipa_ut_module_init:1036 Loading IPA test module...

[    9.472736] sdhci_msm 8804000.sdhci: Linked as a consumer to regulator.42

[    9.484558] mmc0: SDHCI controller on 8804000.sdhci [8804000.sdhci] using 64-bit ADMA in legacy mode

[    9.487618] usb_bam_init: setting SPS_BAM_SMMU_EN flag with (a704000.qcom,usbbam)

[    9.530622] sps:BAM 0x000000000a704000 is registered.

[    9.530673] bimc-bwmon 90b6400.qcom,cpu-cpu-llcc-bwmon: BW HWmon governor registered.

[    9.543929] bimc-bwmon 9091000.qcom,cpu-llcc-ddr-bwmon: BW HWmon governor registered.

[    9.552018] bimc-bwmon 60400.qcom,npu-npu-llcc-bwmon: BW HWmon governor registered.

[    9.559893] bimc-bwmon 9093000.qcom,npu-llcc-ddr-bwmon: BW HWmon governor registered.

[    9.567976] bimc-bwmon 70300.qcom,npudsp-npu-ddr-bwmon: BW HWmon governor registered.

[    9.576310] arm-memlat-mon soc:qcom,cpu0-cpugrp:qcom,cpu0-cpu-l3-latmon: Memory Latency governor registered.

[    9.586446] arm-memlat-mon soc:qcom,cpu0-cpugrp:qcom,cpu0-cpu-llcc-latmon: Memory Latency governor registered.

[    9.596750] arm-memlat-mon soc:qcom,cpu0-cpugrp:qcom,cpu0-llcc-ddr-latmon: Memory Latency governor registered.

[    9.607062] arm-memlat-mon soc:qcom,cpu4-cpugrp:qcom,cpu4-cpu-l3-latmon: Memory Latency governor registered.

[    9.617189] arm-memlat-mon soc:qcom,cpu4-cpugrp:qcom,cpu7-cpu-l3-latmon: Memory Latency governor registered.

[    9.627312] arm-memlat-mon soc:qcom,cpu4-cpugrp:qcom,cpu4-cpu-llcc-latmon: Memory Latency governor registered.

[    9.637613] arm-memlat-mon soc:qcom,cpu4-cpugrp:qcom,cpu4-llcc-ddr-latmon: Memory Latency governor registered.

[    9.647918] arm-memlat-mon soc:qcom,cpu4-cpugrp:qcom,cpu4-computemon: Compute governor registered.

[    9.657150] arm-memlat-mon soc:qcom,cpu4-cpugrp:qcom,cpu4-qoslatmon: Memory Latency governor registered.

[    9.667058] register_client_adhoc:find path.src 1 dest 627

[    9.667119] register_client_adhoc:Client handle 35 soc:qcom,snoc_cnoc_keepalive

[    9.672911] register_client_adhoc:find path.src 1 dest 770

[    9.680454] register_client_adhoc:Client handle 36 soc:qcom,cpu-cpu-llcc-bw

[    9.686448] register_client_adhoc:find path.src 129 dest 512

[    9.693627] register_client_adhoc:Client handle 37 soc:qcom,cpu-llcc-ddr-bw

[    9.699837] register_client_adhoc:find path.src 154 dest 770

[    9.707030] register_client_adhoc:Client handle 38 soc:qcom,npu-npu-llcc-bw

[    9.712992] register_client_adhoc:find path.src 770 dest 512

[    9.720179] register_client_adhoc:Client handle 39 soc:qcom,npu-llcc-ddr-bw

[    9.726140] register_client_adhoc:find path.src 154 dest 512

[    9.733348] register_client_adhoc:Client handle 40 soc:qcom,npudsp-npu-ddr-bw

[    9.739317] register_client_adhoc:find path.src 154 dest 512

[    9.746701] register_client_adhoc:Client handle 41 soc:qcom,npu-npu-ddr-latfloor

[    9.752595] register_client_adhoc:find path.src 1 dest 770

[    9.760223] register_client_adhoc:Client handle 42 soc:qcom,cpu0-cpu-llcc-lat

[    9.765967] register_client_adhoc:find path.src 1 dest 770

[    9.773323] register_client_adhoc:Client handle 43 soc:qcom,cpu4-cpu-llcc-lat

[    9.779083] register_client_adhoc:find path.src 129 dest 512

[    9.786456] register_client_adhoc:Client handle 44 soc:qcom,cpu0-llcc-ddr-lat

[    9.792402] register_client_adhoc:find path.src 129 dest 512

[    9.799759] register_client_adhoc:Client handle 45 soc:qcom,cpu4-llcc-ddr-lat

[    9.805712] register_client_adhoc:find path.src 129 dest 512

[    9.813057] register_client_adhoc:Client handle 46 soc:qcom,cpu4-cpu-ddr-latfloor

[    9.819055] register_client_adhoc:find path.src 26 dest 512

[    9.826807] register_client_adhoc:Client handle 47 soc:qcom,gpubw

[    9.833386] qcom-llcc-pmu 9095000.llcc-pmu: Registered llcc_pmu, type: 9

[    9.846859] ext-mdm soc:qcom,mdm0: mdm_configure_ipc Failed to configure AP2MDM_ERRFATAL gpio

[    9.855623] ext-mdm soc:qcom,mdm0: mdm_configure_ipc Failed to configure MDM2AP_STATUS gpio

[    9.864483] usbcore: registered new interface driver snd-usb-audio

[    9.870877] uaudio-qmi soc:usb_audio_qmi_dev: Linked as a consumer to 15000000.apps-smmu

[    9.879217] iommu: Adding device soc:usb_audio_qmi_dev to group 26

[    9.886047] enter addr=0x68

[    9.886052] a2b24xx_i2c_probe: AD2428 enable gpio value = 0

[    9.894672] a2b24xx_i2c_probe: AD2428 enable gpio succuss, enable value = 1

[    9.901838] a2b24xx 1-0068: No cache used with register defaults set!

[    9.908614] register_client_adhoc:find path.src 1 dest 590

[    9.908675] register_client_adhoc:Client handle 48 disp_rsc_reg

[    9.914332] register_client_adhoc:find path.src 20003 dest 20513

[    9.920472] register_client_adhoc:find path.src 20004 dest 20513

[    9.926683] register_client_adhoc:Client handle 49 disp_rsc_mnoc_llcc

[    9.932862] register_client_adhoc:find path.src 20000 dest 20512

[    9.939505] register_client_adhoc:Client handle 51 disp_rsc_ebi

[    9.945712] sde_rsc af20000.qcom,sde_rscc: Linked as a consumer to regulator.72

[    9.959407] [sde_rsc_hw:rsc_hw_init_v3:537]: sde rsc init successfully done

[    9.966619] [sde_rsc:sde_rsc_probe:1594]: sde rsc index:0 probed successfully

[    9.974068] dsi_phy ae94400.qcom,mdss_dsi_phy0: ae94400.qcom,mdss_dsi_phy0 supply gdsc not found, using dummy regulator

[    9.985153] dsi_phy ae94400.qcom,mdss_dsi_phy0: Linked as a consumer to regulator.0

[    9.993026] dsi_phy ae94400.qcom,mdss_dsi_phy0: Linked as a consumer to regulator.13

[   10.000984] [drm:dsi_phy_driver_probe] [msm-dsi-info]: DSI_0: Probe successful

[   10.008419] dsi_phy ae96400.qcom,mdss_dsi_phy1: ae96400.qcom,mdss_dsi_phy1 supply gdsc not found, using dummy regulator

[   10.019485] dsi_phy ae96400.qcom,mdss_dsi_phy1: Linked as a consumer to regulator.0

[   10.027362] dsi_phy ae96400.qcom,mdss_dsi_phy1: Linked as a consumer to regulator.13

[   10.035309] [drm:dsi_phy_driver_probe] [msm-dsi-info]: DSI_1: Probe successful

[   10.042868] drm_dsi_ctrl ae94000.qcom,mdss_dsi_ctrl0: Linked as a consumer to regulator.58

[   10.051364] drm_dsi_ctrl ae94000.qcom,mdss_dsi_ctrl0: Linked as a consumer to regulator.18

[   10.059848] AXI: get_pdata(): Error: Client name not found

[   10.065491] AXI: msm_bus_cl_get_pdata(): client has to provide missing entry for successful registration

[   10.075218] [drm:dsi_ctrl_dev_probe] [msm-dsi-info]: dsi-ctrl-0: Probe successful

[   10.082928] drm_dsi_ctrl ae96000.qcom,mdss_dsi_ctrl1: Linked as a consumer to regulator.58

[   10.091424] drm_dsi_ctrl ae96000.qcom,mdss_dsi_ctrl1: Linked as a consumer to regulator.18

[   10.099906] AXI: get_pdata(): Error: Client name not found

[   10.105546] AXI: msm_bus_cl_get_pdata(): client has to provide missing entry for successful registration

[   10.115276] [drm:dsi_ctrl_dev_probe] [msm-dsi-info]: dsi-ctrl-1: Probe successful

[   10.123195] msm-dsi-display soc:qcom,dsi-display-primary: Falling back to syfs fallback for: dsi_prop

[   10.132779] [drm] [msm-dsi-warn]: default panel not found

[   10.138793] msm_vidc:   err : ffffffff: .....: no device Registered

[   10.145620] msm_vidc_v4l2 aa00000.qcom,vidc:non_secure_cb: Linked as a consumer to 15000000.apps-smmu

[   10.155203] iommu: Adding device aa00000.qcom,vidc:non_secure_cb to group 27

[   10.162529] msm_vidc_v4l2 aa00000.qcom,vidc:secure_non_pixel_cb: Linked as a consumer to 15000000.apps-smmu

[   10.172852] iommu: Adding device aa00000.qcom,vidc:secure_non_pixel_cb to group 28

[   10.180733] msm_vidc_v4l2 aa00000.qcom,vidc:secure_bitstream_cb: Linked as a consumer to 15000000.apps-smmu

[   10.190960] iommu: Adding device aa00000.qcom,vidc:secure_bitstream_cb to group 29

[   10.198823] msm_vidc_v4l2 aa00000.qcom,vidc:secure_pixel_cb: Linked as a consumer to 15000000.apps-smmu

[   10.208685] iommu: Adding device aa00000.qcom,vidc:secure_pixel_cb to group 30

[   10.216232] GACT probability NOT on

[   10.219830] Mirror/redirect action on

[   10.223616] netem: version 1.3

[   10.226772] u32 classifier

[   10.229566]     Actions configured

[   10.233246] xt_time: kernel timezone is -0000

[   10.237758] gre: GRE over IPv4 demultiplexor driver

[   10.242778] IPv4 over IPsec tunneling driver

[   10.247310] Initializing XFRM netlink socket

[   10.251712] IPsec XFRM device driver

[   10.255452] NET: Registered protocol family 10

[   10.260285] Segment Routing with IPv6

[   10.264078] mip6: Mobile IPv6

[   10.267229] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver

[   10.273430] NET: Registered protocol family 17

[   10.278015] NET: Registered protocol family 15

[   10.282615] l2tp_core: L2TP core driver, V2.0

[   10.287098] l2tp_ppp: PPPoL2TP kernel driver, V2.0

[   10.292030] l2tp_ip: L2TP IP encapsulation support (L2TPv3)

[   10.297767] l2tp_netlink: L2TP netlink interface

[   10.302526] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)

[   10.308612] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)

[   10.315238] 8021q: 802.1Q VLAN Support v1.8

[   10.319561] sctp: Hash tables configured (bind 256/256)

[   10.325187] register_client_adhoc:find path.src 1 dest 589

[   10.325216] register_client_adhoc:Failed to find path.src 1 dest 589

[   10.331079] minidump-id not found for npu

[   10.341764] subsys-pil-tz 9800000.qcom,npu: for npu segments only will be dumped.

[   10.349474] subsys-pil-tz 9800000.qcom,npu: for md_npu segments only will be dumped.

[   10.357681] platform 3d6a000.qcom,gmu: Linked as a consumer to regulator.69

[   10.364855] platform 3d6a000.qcom,gmu: Linked as a consumer to regulator.70

[   10.372139] platform 3d6a000.qcom,gmu:gmu_user: Linked as a consumer to 3da0000.kgsl-smmu

[   10.380558] iommu: Adding device 3d6a000.qcom,gmu:gmu_user to group 31

[   10.387459] NPU_WARN: npu_bridge_mbox_work: 1216 NPU fw is not loaded

[   10.394265] platform 3d6a000.qcom,gmu:gmu_kernel: Linked as a consumer to 3da0000.kgsl-smmu

[   10.402863] iommu: Adding device 3d6a000.qcom,gmu:gmu_kernel to group 32

[   10.410170] register_client_adhoc:find path.src 26 dest 512

[   10.410217] register_client_adhoc:Client handle 50 grp3d

[   10.415956] register_client_adhoc:find path.src 26 dest 10036

[   10.421465] register_client_adhoc:Client handle 52 cnoc

[   10.427373] query_client_usecase_all: query_start

[   10.432755] query_client_usecase_all: query_start

[   10.437657] kgsl-3d 3d00000.qcom,kgsl-3d0: Linked as a consumer to regulator.69

[   10.450024] kgsl-3d 3d00000.qcom,kgsl-3d0: Linked as a consumer to regulator.70

[   10.457682] platform 3da0000.qcom,kgsl-iommu:gfx3d_user: Linked as a consumer to 3da0000.kgsl-smmu

[   10.466901] iommu: Adding device 3da0000.qcom,kgsl-iommu:gfx3d_user to group 33

[   10.474588] platform 3da0000.qcom,kgsl-iommu:gfx3d_secure: Linked as a consumer to 3da0000.kgsl-smmu

[   10.483985] iommu: Adding device 3da0000.qcom,kgsl-iommu:gfx3d_secure to group 34

[   10.516531] register_client_adhoc:find path.src 1 dest 589

[   10.516552] register_client_adhoc:Failed to find path.src 1 dest 589

[   10.522317] core_ctl: Creating CPU group 0

[   10.533087] core_ctl: Init CPU0 state

[   10.536864] core_ctl: Init CPU1 state

[   10.540646] core_ctl: Init CPU2 state

[   10.544422] core_ctl: Init CPU3 state

[   10.548264] core_ctl: Creating CPU group 4

[   10.552481] core_ctl: Init CPU4 state

[   10.556258] core_ctl: Init CPU5 state

[   10.560039] core_ctl: Init CPU6 state

[   10.563877] core_ctl: Creating CPU group 7

[   10.568093] core_ctl: Init CPU7 state

[   10.571974] registered taskstats version 1

[   10.576193] Loading compiled-in X.509 certificates

[   10.581238] Key type ._fscrypt registered

[   10.585371] Key type .fscrypt registered

[   10.589417] Key type fscrypt-provisioning registered

[   10.594618] pstore: Using compression: deflate

[   10.599712] Please check if `measure` clk is registered.

[   10.608409] spss_utils [spss_parse_dt]: iar_buf_addr [0x8bef0000].

[   10.614797] spss_utils [spss_probe]: Initialization completed ok, firmware_name [spss2p].

[   10.624057] fastrpc soc:qcom,msm-adsprpc-mem: for adsp_rh segments only will be dumped.

[   10.632309] adsprpc: init_secure_vmid_list: secure VMID = 22

[   10.638131] adsprpc: init_secure_vmid_list: secure VMID = 37

[   10.644015] adsprpc: fastrpc_probe: service location enabled for avs/audio (audio_pdr_adsprpc)

[   10.652913] adsprpc: fastrpc_probe: service location enabled for tms/servreg (sensors_pdr_adsprpc)

[   10.662201] fastrpc soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb1: Linked as a consumer to 15000000.apps-smmu

[   10.672866] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb1 to group 35

[   10.681803] fastrpc soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb2: Linked as a consumer to 15000000.apps-smmu

[   10.692444] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb2 to group 36

[   10.701332] Error: swapper/0: fastrpc_cb_probe: failed to create debugfs global file

[   10.709341] fastrpc soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb3: Linked as a consumer to 15000000.apps-smmu

[   10.720057] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb3 to group 37

[   10.728940] Error: swapper/0: fastrpc_cb_probe: failed to create debugfs global file

[   10.736944] fastrpc soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb4: Linked as a consumer to 15000000.apps-smmu

[   10.747591] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb4 to group 38

[   10.756506] Error: swapper/0: fastrpc_cb_probe: failed to create debugfs global file

[   10.764538] fastrpc soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb5: Linked as a consumer to 15000000.apps-smmu

[   10.775181] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb5 to group 39

[   10.784086] Error: swapper/0: fastrpc_cb_probe: failed to create debugfs global file

[   10.792087] fastrpc soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb6: Linked as a consumer to 15000000.apps-smmu

[   10.802731] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb6 to group 40

[   10.811610] Error: swapper/0: fastrpc_cb_probe: failed to create debugfs global file

[   10.819626] fastrpc soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb7: Linked as a consumer to 15000000.apps-smmu

[   10.830280] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb7 to group 41

[   10.839157] Error: swapper/0: fastrpc_cb_probe: failed to create debugfs global file

[   10.847164] fastrpc soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb8: Linked as a consumer to 15000000.apps-smmu

[   10.857800] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb8 to group 42

[   10.866684] Error: swapper/0: fastrpc_cb_probe: failed to create debugfs global file

[   10.874684] fastrpc soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb9: Linked as a consumer to 15000000.apps-smmu

[   10.885525] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb9 to group 43

[   10.894409] Error: swapper/0: fastrpc_cb_probe: failed to create debugfs global file

[   10.902430] fastrpc soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb10: Linked as a consumer to 15000000.apps-smmu

[   10.913153] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb10 to group 44

[   10.922138] Error: swapper/0: fastrpc_cb_probe: failed to create debugfs global file

[   10.930140] fastrpc soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb11: Linked as a consumer to 15000000.apps-smmu

[   10.940878] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb11 to group 45

[   10.949846] Error: swapper/0: fastrpc_cb_probe: failed to create debugfs global file

[   10.957847] fastrpc soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb12: Linked as a consumer to 15000000.apps-smmu

[   10.968577] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb12 to group 46

[   10.977554] Error: swapper/0: fastrpc_cb_probe: failed to create debugfs global file

[   10.985563] fastrpc soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb13: Linked as a consumer to 15000000.apps-smmu

[   10.996298] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb13 to group 47

[   11.005274] Error: swapper/0: fastrpc_cb_probe: failed to create debugfs global file

[   11.013277] fastrpc soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb14: Linked as a consumer to 15000000.apps-smmu

[   11.024022] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb14 to group 48

[   11.032993] Error: swapper/0: fastrpc_cb_probe: failed to create debugfs global file

[   11.041003] fastrpc soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb15: Linked as a consumer to 15000000.apps-smmu

[   11.051725] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb15 to group 49

[   11.060704] Error: swapper/0: fastrpc_cb_probe: failed to create debugfs global file

[   11.068812] adsprpc: fastrpc_device_init: SSR notifier registered for adsp

[   11.075875] adsprpc: fastrpc_device_init: SSR notifier registered for modem

[   11.083041] adsprpc: fastrpc_device_init: SSR notifier registered for slpi

[   11.090113] adsprpc: fastrpc_device_init: SSR notifier registered for cdsp

[   11.097244] register_client_adhoc:find path.src 1 dest 589

[   11.097282] register_client_adhoc:Failed to find path.src 1 dest 589

[   11.103087] register_client_adhoc:find path.src 1 dest 589

[   11.109638] register_client_adhoc:Failed to find path.src 1 dest 589

[   11.115349] ngd_msm_ctrl 3ac0000.slim: Linked as a consumer to 15000000.apps-smmu

[   11.129732] iommu: Adding device 3ac0000.slim to group 50

[   11.135630] register_client_adhoc:find path.src 1 dest 589

[   11.135642] register_client_adhoc:Failed to find path.src 1 dest 589

[   11.136440] input: gpio-keys as /devices/platform/soc/soc:gpio_keys/input/input3

[   11.155506] register_client_adhoc:find path.src 1 dest 589

[   11.155517] register_client_adhoc:Failed to find path.src 1 dest 589

[   11.161612] register_client_adhoc:find path.src 1 dest 589

[   11.168158] register_client_adhoc:Failed to find path.src 1 dest 589

[   11.174399] register_client_adhoc:find path.src 1 dest 589

[   11.175658] rmnet_ipa3 started initialization

[   11.180954] register_client_adhoc:Failed to find path.src 1 dest 589

[   11.181039] register_client_adhoc:find path.src 1 dest 589

[   11.186741] RNDIS_IPA module is loaded.

[   11.191057] register_client_adhoc:Failed to find path.src 1 dest 589

[   11.191138] register_client_adhoc:find path.src 1 dest 589

[   11.197653] [drm:dp_display_init_aux_switch][msm-dp-err][1   ]failed to register notifier (-22)

[   11.203232] register_client_adhoc:Failed to find path.src 1 dest 589

[   11.228375] msm notifier probed successfully

[   11.239400] register_client_adhoc:find path.src 1 dest 589

[   11.239414] register_client_adhoc:Failed to find path.src 1 dest 589

[   11.245177] [drm:dp_display_init_aux_switch][msm-dp-err][82  ]failed to register notifier (-22)

[   11.245251] cfg80211: Loading compiled-in X.509 certificates for regulatory database

[   11.268979] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'

[   11.276283] msm_bus_late_init: Remove handoff bw requests

[   11.282090] regulator_proxy_consumer_remove_all: removing regulator proxy consumer requests

[   11.290851] ALSA device list:

[   11.293916]   No soundcards found.

[   11.298193] Freeing unused kernel memory: 4096K

[   11.302977] Run /init as init process

[   11.307335] init: init first stage started!

[   11.311673] init: Unable to open /lib/modules, skipping module loading.

[   11.318577] init: [libfs_mgr]dt_fstab: Skip disabled entry for partition vendor

[   11.326083] init: [libfs_mgr]ReadFstabFromDt(): failed to read fstab from dt

[   11.333371] init: [libfs_mgr]dt_fstab: Skip disabled entry for partition vendor

[   11.340990] init: [libfs_mgr]Warning: unknown flag: resize

[   11.346769] init: Using Android DT directory /proc/device-tree/firmware/android/

[   11.367403] init: [libfs_mgr]superblock s_max_mnt_count:65535,/dev/block/by-name/metadata

[   11.375838] init: [libfs_mgr]check_fs(): mount(/dev/block/by-name/metadata,/metadata,ext4)=-1: No such file or directory

[   11.387007] init: [libfs_mgr]Running /system/bin/e2fsck on /dev/block/sda11

[   11.395419] e2fsck: e2fsck 1.45.4 (23-Sep-2019)

[   11.400084] e2fsck: Pass 1: Checking inodes, blocks, and sizes

[   11.406081] e2fsck: Pass 2: Checking directory structure

[   11.411539] e2fsck: Pass 3: Checking directory connectivity

[   11.417297] e2fsck: Pass 4: Checking reference counts

[   11.422544] e2fsck: Pass 5: Checking group summary information

[   11.428593] e2fsck: /dev/block/by-name/metadata: 37/4096 files (0.0% non-contiguous), 1201/4096 blocks

[   11.440001] EXT4-fs (sda11): mounted filesystem with ordered data mode. Opts: discard

[   11.454058] device-mapper: verity: sha256 using implementation "sha256-ce"

[   11.464677] EXT4-fs (dm-5): mounting with "discard" option, but the device does not support discard

[   11.473978] EXT4-fs (dm-5): mounted filesystem without journal. Opts: barrier=1,discard

[   11.489251] device-mapper: verity: sha256 using implementation "sha256-ce"

[   11.499607] EXT4-fs (dm-6): mounting with "discard" option, but the device does not support discard

[   11.508912] EXT4-fs (dm-6): mounted filesystem without journal. Opts: barrier=1,discard

[   11.517429] device-mapper: verity: sha256 using implementation "sha256-ce"

[   11.528179] EXT4-fs (dm-7): mounting with "discard" option, but the device does not support discard

[   11.537481] EXT4-fs (dm-7): mounted filesystem without journal. Opts: barrier=1,discard

[   11.546027] device-mapper: verity: sha1 using implementation "sha1-ce"

[   11.556344] EXT4-fs (dm-8): mounting with "discard" option, but the device does not support discard

[   11.565647] EXT4-fs (dm-8): mounted filesystem without journal. Opts: barrier=1,discard

[   11.574173] device-mapper: verity: sha1 using implementation "sha1-ce"

[   11.583629] EXT4-fs (dm-9): mounting with "discard" option, but the device does not support discard

[   11.592934] EXT4-fs (dm-9): mounted filesystem without journal. Opts: barrier=1,discard

[   11.617410] init: 35 output lines suppressed due to ratelimiting

[   11.761851] init: [libfs_mgr]dt_fstab: Skip disabled entry for partition vendor

[   11.769575] init: [libfs_mgr]GetFstabPath()fstab_path:/odm/etc/fstab.default

[   11.778027] init: [libfs_mgr]GetFstabPath()fstab_path:/vendor/etc/fstab.default

[   11.787405] init: [libfs_mgr]GetFstabPath()fstab_path:/system/etc/fstab.default

[   11.795006] init: [libfs_mgr]GetFstabPath()fstab_path:/first_stage_ramdisk/system/etc/fstab.default

[   11.804342] init: [libfs_mgr]GetFstabPath()fstab_path:/fstab.default

[   11.810960] init: [libfs_mgr]GetFstabPath()fstab_path:/first_stage_ramdisk/fstab.default

[   11.819494] init: [libfs_mgr]GetFstabPath()fstab_path:/odm/etc/fstab.qcom

[   11.826586] init: [libfs_mgr]GetFstabPath()fstab_path:/vendor/etc/fstab.qcom

[   11.836494] init: [libfs_mgr]GetFstabPath()fstab_path.c_str():/vendor/etc/fstab.qcom

[   13.025670] SELinux:  policy capability network_peer_controls=1

[   13.031771] SELinux:  policy capability open_perms=1

[   13.036915] SELinux:  policy capability extended_socket_class=1

[   13.043024] SELinux:  policy capability always_check_network=0

[   13.049034] SELinux:  policy capability cgroup_seclabel=0

[   13.054591] SELinux:  policy capability nnp_nosuid_transition=1

[   13.109160] audit: type=1403 audit(252483.419:2): auid=4294967295 ses=4294967295 lsm=selinux res=1

[   13.118432] audit: type=1404 audit(252483.419:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 enabled=1 old-enabled=1 lsm=selinux res=1

[   13.123681] init: 8 output lines suppressed due to ratelimiting

[   13.147647] init: init second stage started!

[   13.164098] init: Using Android DT directory /proc/device-tree/firmware/android/

[   13.174217] init: Overriding previous property 'persist.sys.usb.config':'adb' with new value 'none'

[   13.184879] init: Do not have permissions to set 'persist.backup.ntpServer' to '0.pool.ntp.org' in property file '/vendor/build.prop': SELinux permission check failed

[   13.200153] init: Overriding previous property 'dalvik.vm.heapsize':'36m' with new value '512m'

[   13.209184] init: Do not have permissions to set 'persist.vendor.bt.a2dp_offload_cap' to 'sbc-aptx-aptxtws-aptxhd-aac-ldac' in property file '/vendor/build.prop': SELinux permission check failed

[   13.227092] init: Do not have permissions to set 'vendor.mm.enable.qcom_parser' to '16777215' in property file '/vendor/build.prop': SELinux permission check failed

[   13.242222] init: Do not have permissions to set 'persist.demo.hdmirotationlock' to 'false' in property file '/vendor/build.prop': SELinux permission check failed

[   13.258373] init: Couldn't load property file '/vendor_dlkm/etc/build.prop': open() failed: No such file or directory: No such file or directory

[   13.272720] init: Couldn't load property file '/odm_dlkm/etc/build.prop': open() failed: No such file or directory: No such file or directory

[   13.315266] audit: type=1107 audit(252483.623:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=u:r:init:s0 msg='avc:  denied  { read } for property=persist.debug.trace pid=0 uid=0 gid=0 scontext=u:r:vendor_init:s0 tcontext=u:object_r:persist_debug_prop:s0 tclass=file permissive=0'

[   13.445900] ueventd: ueventd started!

[   13.450923] selinux: SELinux: Loaded file_contexts

[   13.455859] selinux:

[   13.458280] ueventd: Parsing file /system/etc/ueventd.rc...

[   13.465167] ueventd: Added '/vendor/etc/ueventd.rc' to import list

[   13.471534] ueventd: Added '/odm/etc/ueventd.rc' to import list

[   13.477712] ueventd: Parsing file /vendor/etc/ueventd.rc...

[   13.483458] ueventd: Unable to read config file '/vendor/etc/ueventd.rc': open() failed: No such file or directory

[   13.494093] ueventd: Parsing file /odm/etc/ueventd.rc...

[   13.499569] ueventd: Unable to read config file '/odm/etc/ueventd.rc': open() failed: No such file or directory

[   13.666436] audit: type=1400 audit(252483.975:5): avc:  denied  { mounton } for  pid=1 comm="init" path="/sys/kernel/tracing" dev="tracefs" ino=1 scontext=u:r:init:s0 tcontext=u:object_r:debugfs_tracing_debug:s0 tclass=dir permissive=0

[   13.712921] msm_11ad soc:qcom,wil6210: GPIO <qcom,wigig-dc> not found, dc GPIO not used

[   13.721178] msm_11ad soc:qcom,wil6210: GPIO <qcom,wigig-en> not found, enable GPIO not used

[   13.729782] msm_11ad soc:qcom,wil6210: GPIO <qcom,sleep-clk-en> not found, sleep clock not used

[   13.738825] msm_11ad soc:qcom,wil6210: soc:qcom,wil6210 supply vdd not found, using dummy regulator

[   13.748231] msm_11ad soc:qcom,wil6210: Linked as a consumer to regulator.0

[   13.755339] msm_11ad soc:qcom,wil6210: Linked as a consumer to regulator.8

[   13.762434] msm_11ad soc:qcom,wil6210: Linked as a consumer to regulator.26

[   13.769814] msm_pcie_enumerate: PCIe: RC1: has already been enumerated.

[   13.776625] msm_11ad soc:qcom,wil6210: Wigig device not found

[   13.782575] msm_11ad soc:qcom,wil6210: Dropping the link to regulator.26

[   13.789480] msm_11ad soc:qcom,wil6210: Dropping the link to regulator.0

[   13.796300] msm_11ad soc:qcom,wil6210: Dropping the link to regulator.8

[   13.822140] q6_pdr_dlkm: loading out-of-tree module taints kernel.

[   13.832453] apr_dlkm: no symbol version for snd_event_notify

[   13.840378] register_client_adhoc:find path.src 1 dest 589

[   13.840487] register_client_adhoc:Failed to find path.src 1 dest 589

[   13.846614] [drm:dp_display_init_aux_switch][msm-dp-err][354 ]failed to register notifier (-22)

[   13.862588] register_client_adhoc:find path.src 1 dest 589

[   13.862607] register_client_adhoc:Failed to find path.src 1 dest 589

[   13.868349] [drm:dp_display_init_aux_switch][msm-dp-err][123 ]failed to register notifier (-22)

[   13.897063]

[   13.898606] **********************************************************

[   13.905321] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **

[   13.912030] **                                                      **

[   13.918741] ** trace_printk() being used. Allocating extra memory.  **

[   13.925451] **                                                      **

[   13.932181] ** This means that this is a DEBUG kernel and it is     **

[   13.938888] ** unsafe for production use.                           **

[   13.945595] **                                                      **

[   13.952297] ** If you see this message and you are not debugging    **

[   13.959000] ** the kernel, report this immediately to your vendor!  **

[   13.965701] **                                                      **

[   13.972405] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **

[   13.979105] **********************************************************

[   13.990234] register_client_adhoc:find path.src 1 dest 589

[   13.990272] register_client_adhoc:Failed to find path.src 1 dest 589

[   13.996053] [drm:dp_display_init_aux_switch][msm-dp-err][419 ]failed to register notifier (-22)

[   14.026646] register_client_adhoc:find path.src 1 dest 589

[   14.026685] register_client_adhoc:Failed to find path.src 1 dest 589

[   14.032482] [drm:dp_display_init_aux_switch][msm-dp-err][419 ]failed to register notifier (-22)

[   14.050071] register_client_adhoc:find path.src 1 dest 589

[   14.050104] register_client_adhoc:Failed to find path.src 1 dest 589

[   14.055931] [drm:dp_display_init_aux_switch][msm-dp-err][419 ]failed to register notifier (-22)

[   14.092617] register_client_adhoc:find path.src 1 dest 589

[   14.092650] register_client_adhoc:Failed to find path.src 1 dest 589

[   14.098479] [drm:dp_display_init_aux_switch][msm-dp-err][82  ]failed to register notifier (-22)

[   14.114159] register_client_adhoc:find path.src 1 dest 589

[   14.114178] register_client_adhoc:Failed to find path.src 1 dest 589

[   14.120034] [drm:dp_display_init_aux_switch][msm-dp-err][419 ]failed to register notifier (-22)

[   14.135841] register_client_adhoc:find path.src 1 dest 589

[   14.135862] register_client_adhoc:Failed to find path.src 1 dest 589

[   14.141693] kona-pinctrl f000000.pinctrl: invalid function func2 in map table

[   14.155579] kona-pinctrl f000000.pinctrl: invalid function func2 in map table

[   14.162952] [drm:dp_display_init_aux_switch][msm-dp-err][78  ]failed to register notifier (-22)

[   14.162957] kona-pinctrl f000000.pinctrl: invalid function func2 in map table

[   14.179222] kona-pinctrl f000000.pinctrl: invalid function func2 in map table