1
|
00 00 [ 316.384087] servloc: init_service_locator: init_service_locator: wait for locator service timed out
|
2
|
[ 316.393394] servloc: pd_locator_work: Unable to connect to service locator!, rc = -62
|
3
|
[ 316.393407] servloc: pd_locator_work: Unable to connect to service locator!, rc = -62
|
4
|
[ 316.401454] adsprpc: fastrpc_get_service_location_notify: PDR notifier locator for adsp is down for sensors_pdr_adsprpc
|
5
|
[ 316.420575] servloc: pd_locator_work: Unable to connect to service locator!, rc = -62
|
6
|
[ 316.428624] adsprpc: fastrpc_get_service_location_notify: PDR notifier locator for adsp is down for audio_pdr_adsprpc
|
7
|
00 [ 404.964089] usb_extcon_detect_cable@108: vbus=0
|
8
|
[ 404.968962] msm-dwc3 a600000.ssusb: Could not get usb psy
|
9
|
[ 404.974887] msm-dwc3 a600000.ssusb: DWC3 in low power mode
|
10
|
[ 404.975113] msm-dwc3 a800000.ssusb: DWC3 in low power mode
|
11
|
[ 405.044141] msm-dwc3 a800000.ssusb: DWC3 exited from low power mode
|
12
|
[ 405.044144] msm-dwc3 a600000.ssusb: DWC3 exited from low power mode
|
13
|
[ 405.051214] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
|
14
|
[ 405.057619] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
|
15
|
[ 405.062691] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
|
16
|
[ 405.062829] xhci-hcd xhci-hcd.0.auto: hcc params 0x0230ffe5 hci version 0x110 quirks 0x0000000000010810
|
17
|
[ 405.068363] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2
|
18
|
[ 405.076224] xhci-hcd xhci-hcd.0.auto: irq 350, io mem 0x0a800000
|
19
|
[ 405.076268] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
|
20
|
[ 405.086043] xhci-hcd xhci-hcd.1.auto: hcc params 0x0230ffe5 hci version 0x110 quirks 0x0000000000010010
|
21
|
[ 405.093764] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
|
22
|
[ 405.099938] xhci-hcd xhci-hcd.1.auto: irq 348, io mem 0x0a600000
|
23
|
[ 405.108427] usb usb1: Product: xHCI Host Controller
|
24
|
[ 405.136678] usb usb1: Manufacturer: Linux 4.19.157-perf+ xhci-hcd
|
25
|
[ 405.142945] usb usb1: SerialNumber: xhci-hcd.0.auto
|
26
|
[ 405.148844] hub 1-0:1.0: USB hub found
|
27
|
[ 405.152718] hub 1-0:1.0: 1 port detected
|
28
|
[ 405.156856] register_client_adhoc:find path.src 1 dest 589
|
29
|
[ 405.156892] register_client_adhoc:Failed to find path.src 1 dest 589
|
30
|
[ 405.163522] [drm:dp_display_init_aux_switch][msm-dp-err][401 ]failed to register notifier (-22)
|
31
|
[ 405.164106] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
|
32
|
[ 405.164130] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
|
33
|
[ 405.164131] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
|
34
|
[ 405.164132] usb usb2: Product: xHCI Host Controller
|
35
|
[ 405.164133] usb usb2: Manufacturer: Linux 4.19.157-perf+ xhci-hcd
|
36
|
[ 405.164133] usb usb2: SerialNumber: xhci-hcd.1.auto
|
37
|
[ 405.165128] hub 2-0:1.0: USB hub found
|
38
|
[ 405.165136] hub 2-0:1.0: 1 port detected
|
39
|
[ 405.165971] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
|
40
|
[ 405.165974] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
|
41
|
[ 405.165976] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.1 Enhanced SuperSpeed
|
42
|
[ 405.165996] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
|
43
|
[ 405.166020] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
|
44
|
[ 405.166022] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
|
45
|
[ 405.166023] usb usb3: Product: xHCI Host Controller
|
46
|
[ 405.166023] usb usb3: Manufacturer: Linux 4.19.157-perf+ xhci-hcd
|
47
|
[ 405.166025] usb usb3: SerialNumber: xhci-hcd.1.auto
|
48
|
[ 405.166996] hub 3-0:1.0: USB hub found
|
49
|
[ 405.167003] hub 3-0:1.0: 1 port detected
|
50
|
[ 405.170088] register_client_adhoc:find path.src 1 dest 589
|
51
|
[ 405.170103] register_client_adhoc:Failed to find path.src 1 dest 589
|
52
|
[ 405.179036] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 4
|
53
|
[ 405.184749] [drm:dp_display_init_aux_switch][msm-dp-err][401 ]failed to register notifier (-22)
|
54
|
[ 405.193126] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.1 Enhanced SuperSpeed
|
55
|
[ 405.330608] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
|
56
|
[ 405.339093] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
|
57
|
[ 405.346519] usb usb4: Product: xHCI Host Controller
|
58
|
[ 405.351532] usb usb4: Manufacturer: Linux 4.19.157-perf+ xhci-hcd
|
59
|
[ 405.357787] usb usb4: SerialNumber: xhci-hcd.0.auto
|
60
|
[ 405.363046] hub 4-0:1.0: USB hub found
|
61
|
[ 405.366958] hub 4-0:1.0: 1 port detected
|
62
|
[ 405.371046] register_client_adhoc:find path.src 1 dest 589
|
63
|
[ 405.371060] register_client_adhoc:Failed to find path.src 1 dest 589
|
64
|
[ 405.376819] [drm:dp_display_init_aux_switch][msm-dp-err][401 ]failed to register notifier (-22)
|
65
|
[ 405.392309] register_client_adhoc:find path.src 1 dest 589
|
66
|
[ 405.392321] register_client_adhoc:Failed to find path.src 1 dest 589
|
67
|
[ 405.398058] [drm:dp_display_init_aux_switch][msm-dp-err][401 ]failed to register notifier (-22)
|
68
|
[ 406.752252] msm-dwc3 a600000.ssusb: DWC3 in low power mode
|
69
|
[ 406.752311] msm-dwc3 a800000.ssusb: DWC3 in low power mode
|
70
|
[ 408.064089] usb_extcon_detect_cable@108: vbus=1
|
71
|
[ 408.069161] msm-dwc3 a600000.ssusb: DWC3 exited from low power mode
|
72
|
[ 408.070443] msm-dwc3 a600000.ssusb: Could not get usb psy
|
73
|
[ 408.070636] msm-dwc3 a800000.ssusb: DWC3 exited from low power mode
|
74
|
[ 408.070710] xhci-hcd xhci-hcd.0.auto: remove, state 4
|
75
|
[ 408.070722] usb usb4: USB disconnect, device number 1
|
76
|
[ 408.071874] xhci-hcd xhci-hcd.0.auto: USB bus 4 deregistered
|
77
|
[ 408.071884] xhci-hcd xhci-hcd.0.auto: remove, state 4
|
78
|
[ 408.071892] usb usb1: USB disconnect, device number 1
|
79
|
[ 408.073125] xhci-hcd xhci-hcd.0.auto: USB bus 1 deregistered
|
80
|
[ 408.073495] msm-dwc3 a800000.ssusb: DWC3 in low power mode
|
81
|
[ 408.075641] xhci-hcd xhci-hcd.1.auto: remove, state 4
|
82
|
[ 408.130911] usb usb3: USB disconnect, device number 1
|
83
|
[ 408.136389] xhci-hcd xhci-hcd.1.auto: USB bus 3 deregistered
|
84
|
[ 408.140177] msm-dwc3 a800000.ssusb: DWC3 exited from low power mode
|
85
|
[ 408.142216] xhci-hcd xhci-hcd.1.auto: remove, state 4
|
86
|
[ 408.153863] usb usb2: USB disconnect, device number 1
|
87
|
[ 408.159388] xhci-hcd xhci-hcd.1.auto: USB bus 2 deregistered
|
88
|
[ 408.165447] msm-dwc3 a600000.ssusb: DWC3 in low power mode
|
89
|
[ 408.171093] msm-dwc3 a600000.ssusb: Could not get usb psy
|
90
|
[ 408.176648] msm-dwc3 a600000.ssusb: Could not get usb psy
|
91
|
[ 408.240160] msm-dwc3 a600000.ssusb: DWC3 exited from low power mode
|
92
|
[ 1043.404058] usb_extcon_detect_cable@108: vbus=0
|
93
|
[ 1043.408933] msm-dwc3 a600000.ssusb: Could not get usb psy
|
94
|
[ 1043.414852] msm-dwc3 a600000.ssusb: DWC3 in low power mode
|
95
|
[ 1043.415094] msm-dwc3 a800000.ssusb: DWC3 in low power mode
|
96
|
[ 1043.484156] msm-dwc3 a600000.ssusb: DWC3 exited from low power mode
|
97
|
[ 1043.484187] msm-dwc3 a800000.ssusb: DWC3 exited from low power mode
|
98
|
[ 1043.491220] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
|
99
|
[ 1043.498806] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
|
100
|
[ 1043.502741] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
|
101
|
[ 1043.502936] xhci-hcd xhci-hcd.0.auto: hcc params 0x0230ffe5 hci version 0x110 quirks 0x0000000000010010
|
102
|
[ 1043.508471] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2
|
103
|
[ 1043.516352] xhci-hcd xhci-hcd.0.auto: irq 348, io mem 0x0a600000
|
104
|
[ 1043.526136] xhci-hcd xhci-hcd.1.auto: hcc params 0x0230ffe5 hci version 0x110 quirks 0x0000000000010810
|
105
|
[ 1043.533922] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
|
106
|
[ 1043.540034] xhci-hcd xhci-hcd.1.auto: irq 350, io mem 0x0a800000
|
107
|
[ 1043.564373] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
|
108
|
[ 1043.571802] usb usb1: Product: xHCI Host Controller
|
109
|
[ 1043.576820] usb usb1: Manufacturer: Linux 4.19.157-perf+ xhci-hcd
|
110
|
[ 1043.583095] usb usb1: SerialNumber: xhci-hcd.0.auto
|
111
|
[ 1043.588962] hub 1-0:1.0: USB hub found
|
112
|
[ 1043.592834] hub 1-0:1.0: 1 port detected
|
113
|
[ 1043.596944] register_client_adhoc:find path.src 1 dest 589
|
114
|
[ 1043.596963] register_client_adhoc:Failed to find path.src 1 dest 589
|
115
|
[ 1043.602920] [drm:dp_display_init_aux_switch][msm-dp-err][502 ]failed to register notifier (-22)
|
116
|
[ 1043.603519] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
|
117
|
[ 1043.603555] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
|
118
|
[ 1043.603556] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
|
119
|
[ 1043.603557] usb usb2: Product: xHCI Host Controller
|
120
|
[ 1043.603558] usb usb2: Manufacturer: Linux 4.19.157-perf+ xhci-hcd
|
121
|
[ 1043.603559] usb usb2: SerialNumber: xhci-hcd.1.auto
|
122
|
[ 1043.603614] hub 2-0:1.0: USB hub found
|
123
|
[ 1043.603622] hub 2-0:1.0: 1 port detected
|
124
|
[ 1043.603683] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
|
125
|
[ 1043.603685] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
|
126
|
[ 1043.603686] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.1 Enhanced SuperSpeed
|
127
|
[ 1043.603738] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
|
128
|
[ 1043.603739] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
|
129
|
[ 1043.603740] usb usb3: Product: xHCI Host Controller
|
130
|
[ 1043.603740] usb usb3: Manufacturer: Linux 4.19.157-perf+ xhci-hcd
|
131
|
[ 1043.603741] usb usb3: SerialNumber: xhci-hcd.1.auto
|
132
|
[ 1043.603788] hub 3-0:1.0: USB hub found
|
133
|
[ 1043.603795] hub 3-0:1.0: 1 port detected
|
134
|
[ 1043.609466] register_client_adhoc:find path.src 1 dest 589
|
135
|
[ 1043.609480] register_client_adhoc:Failed to find path.src 1 dest 589
|
136
|
[ 1043.618375] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 4
|
137
|
[ 1043.624114] [drm:dp_display_init_aux_switch][msm-dp-err][502 ]failed to register notifier (-22)
|
138
|
[ 1043.632504] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.1 Enhanced SuperSpeed
|
139
|
[ 1043.761667] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
|
140
|
[ 1043.769986] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
|
141
|
[ 1043.778470] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
|
142
|
[ 1043.785896] usb usb4: Product: xHCI Host Controller
|
143
|
[ 1043.790910] usb usb4: Manufacturer: Linux 4.19.157-perf+ xhci-hcd
|
144
|
[ 1043.797166] usb usb4: SerialNumber: xhci-hcd.0.auto
|
145
|
[ 1043.802431] hub 4-0:1.0: USB hub found
|
146
|
[ 1043.806352] hub 4-0:1.0: 1 port detected
|
147
|
[ 1043.810435] register_client_adhoc:find path.src 1 dest 589
|
148
|
[ 1043.810448] register_client_adhoc:Failed to find path.src 1 dest 589
|
149
|
[ 1043.816204] [drm:dp_display_init_aux_switch][msm-dp-err][502 ]failed to register notifier (-22)
|
150
|
[ 1043.831675] register_client_adhoc:find path.src 1 dest 589
|
151
|
[ 1043.831685] register_client_adhoc:Failed to find path.src 1 dest 589
|
152
|
[ 1044.768208] msm-dwc3 a800000.ssusb: DWC3 in low power mode
|
153
|
[ 1044.908227] msm-dwc3 a600000.ssusb: DWC3 in low power mode
|