Bug #111210
【Figure】【EVT】【SI】SLEEP_CLK/PM_SLP_CLK_IN频偏超规格要求
Status: | CLOSED | Start date: | 2022-08-11 | |
---|---|---|---|---|
Priority: | High | Due date: | ||
Assignee: | 项目二组_SD3 曾小文 | % Done: | 0% | |
Category: | EE | |||
Target version: | - | |||
Need_Info: | -- | Found Version: | 2022.08.07 | |
Resolution: | -- | Degrated: | -- | |
Severity: | Major | Verified Version: | ||
Reproducibility: | Every time | Fixed Version: | ||
Test Type: | Bring Up Test | Root cause: |
Description
SLEEP_CLK/PM_SLP_CLK_IN频偏超规格要求:
实测29.666ppm,规格要求小于20ppm
History
#1 Updated by SZ HW Test-曾小文 almost 3 years ago
- Assignee set to SZ-硬件二组_SD3 王苗
#2 Updated by SZ HW Test-曾小文 almost 3 years ago
- Subject changed from SLEEP_CLK/PM_SLP_CLK_IN频偏超规格要求 to 【Figure】【EVT】【SI】SLEEP_CLK/PM_SLP_CLK_IN频偏超规格要求
#3 Updated by 项目二组_SD3 曾小文 almost 3 years ago
- Status changed from New to RESOLVED
#4 Updated by 项目二组_SD3 曾小文 almost 3 years ago
- Status changed from RESOLVED to VERIFIED
#5 Updated by 项目二组_SD3 曾小文 almost 3 years ago
- Status changed from VERIFIED to CLOSED
#6 Updated by CD TPM-申艳艳 almost 3 years ago
- Category set to EE
#7 Updated by SZ-硬件二组_SD3 王苗 over 2 years ago
- Status changed from CLOSED to VERIFIED
- Assignee changed from SZ-硬件二组_SD3 王苗 to 项目二组_SD3 曾小文
高通回复此误差满足要求