Bug #111420
【Figure】【EVT】【SI】MAX96755上电时序未调通
| Status: | CLOSED | Start date: | 2022-08-23 | |
|---|---|---|---|---|
| Priority: | Urgent | Due date: | ||
| Assignee: | 软件二组_SD3 朱彦斌 | % Done: | 0% | |
| Category: | BSP | |||
| Target version: | VX1_MCE_FSE_V1.0_update_20220925 | |||
| Need_Info: | -- | Found Version: | 2022.08.19 | |
| Resolution: | -- | Degrated: | -- | |
| Severity: | Critical | Verified Version: | ||
| Reproducibility: | Every time | Fixed Version: | ||
| Test Type: | Release Test | Root cause: |
Description
MAX96755上电时序未调通
History
#1 Updated by 项目二组_SD3 曾小文 almost 3 years ago
- Status changed from New to RESOLVED
8/25：VDD_18/VDDIO_1V8上电后有0.2V台阶一直到开机，VDDIO_18最大1.286V，PWDN只有1.05V
8/26：朱彦斌改GPIO，评估不影响发板
8/30：CAP_VDD为内部芯片输出，可以不测试，则时序满足规格，台阶问题研发评估影响较小可关闭。
#2 Updated by CD TPM-申艳艳 almost 3 years ago
- Category set to BSP
#3 Updated by SZ HW Test-曾小文 almost 3 years ago
- Status changed from RESOLVED to VERIFIED
rework硬件，更新软件版本后复测PASS
#4 Updated by SZ HW Test-曾小文 almost 3 years ago
- Status changed from VERIFIED to CLOSED
#5 Updated by CDTS-TEST 周婷 almost 3 years ago
- Target version set to VX1_MCE_FSE_V1.0_update_20220925
#6 Updated by CD FW-王伟 over 2 years ago
Gerrit Merge Information：
| ID | Project | Branch | Uploader |
| 143666 | general/aop_proc | Pre_figure_turbox-c2130c-la1.1-vendor-dev | yanbin.zhu@thundercomm.com |
| BSP:LCD: Change L1F ON PM8009 range to 1.3V Change L1F to ranges from 1.1V to 1.3V for power supply TC-RID: 1201-0100501 IssueID: TS-R-DF-111420 Change-Id: I66ae333a82e443c532d153e076f1262633b6fd10 |
|||
#7 Updated by CD FW-王伟 over 2 years ago
Gerrit Merge Information：
| ID | Project | Branch | Uploader |
| 143667 | general/kernel/msm-4.19 | Pre_figure_turbox-c2130c-la1.1-vendor-dev | yanbin.zhu@thundercomm.com |
| BSP:LCD: Add PWDNB GPIO AND Power Supply Sequence Add PWNDB GPIO AND Power Supply Sequence TC-RID: 1201-0100501 IssueID: TS-R-DF-111420 Change-Id: Iceeaa8a11988c51d9d283a38ca22881eaa351fc5 |
|||
#8 Updated by CD FW-王伟 over 2 years ago
Gerrit Merge Information：
| ID | Project | Branch | Uploader |
| 143669 | general/LINUX/android/vendor/qcom/proprietary | Pre_figure_turbox-c2130c-la1.1-vendor-dev | yanbin.zhu@thundercomm.com |
| BSP:LCD: Change L1F ON PM8009 range to 1.3V in DT Change L1F to ranges from 1.1V to 1.3V for power supply TC-RID: 1201-0100501 IssueID: TS-R-DF-111420 Change-Id: I9ec0305216f4e922494e8d2ea5381770acf40672 |
|||