Bug #111421

【Figure】【EVT2】【EE】过压保护:关机电压17V，恢复电压16.4V,标准16.5V

Added by SZ HW Test-曾小文 almost 3 years ago. Updated over 2 years ago.

Status:完成 ClosedStart date:2022-08-23
Priority:HighDue date:2022-11-03
Assignee:SZ HW Test-曾小文% Done:

100%

Category:依赖软件规避的bug
Target version:VX1_MCE_FSE_V2.0_20220930
Need_Info: Found Version:10.24版本
Resolution: Degrated:
Severity:Critical Verified Version:
Reproducibility:Every time Fixed Version:
Test Type:Release Test Root cause:

Description

副驾设备要求9~16V的电压工作范围。

FigureApp.mot (77.5 KB) CD BSP-陈杰, 2022-09-26 18:57

FigureApp.mot (84.9 KB) CD BSP-陈杰, 2022-09-28 16:34

History

#1 Updated by SZ BSP-徐季源 almost 3 years ago

等待外派测试结果

#2 Updated by SZ BSP-徐季源 almost 3 years ago

  • Tracker changed from Bug to 开发 Dev
  • Status changed from New to 进行中 In Progress

ADC 过压保护属于新需求，而非 bug。目前已确定由深圳进行开发

#3 Updated by SZ BSP-徐季源 almost 3 years ago

  • % Done changed from 0 to 80

已经开发，等待硬测测试结果

#4 Updated by SZ BSP-徐季源 almost 3 years ago

  • Assignee changed from SZ BSP-徐季源 to CD BSP-陈杰

#5 Updated by SZ HW Test-曾小文 almost 3 years ago

  • Category set to EE

#6 Updated by IOT-SP-TEST 刘颖 almost 3 years ago

  • Due date set to 2022-09-26

#7 Updated by CD BSP-陈杰 almost 3 years ago

目前已经交给硬测进行测试，并测试通过。上传了下载文件。

#8 Updated by CD BSP-陈杰 almost 3 years ago

  • File FigureApp.mot added
  • Status changed from 进行中 In Progress to 解决 Resolved
  • Assignee changed from CD BSP-陈杰 to CD BSP-杜磊
  • Target version set to VX1_MCE_FSE_V2.0_20220930

目前已完成功能开发，代码已经提交，给到硬测同事测试，功能测试正常。
https://dev.thundercomm.com/gerrit/c/Pre_figure/mcu/+/152609

#9 Updated by CD BSP-杜磊 over 2 years ago

  • Status changed from 解决 Resolved to 完成 Closed

#10 Updated by SZ HW Test-曾小文 over 2 years ago

  • Tracker changed from 开发 Dev to Bug
  • Subject changed from 【Figure】【EVT】【EE】3.5V就能开机,20V无过压保护 to 【Figure】【EVT】【EE】过压保护:关机电压17V，恢复电压16.4V,标准16.5V
  • Category changed from EE to 依赖软件规避的bug
  • Assignee changed from CD BSP-杜磊 to CD BSP-陈杰
  • Severity set to Critical
  • Reproducibility set to Every time
  • Test Type set to Release Test
  • Found Version set to FlatBuild_HH_VX1_MCE_FSE.M.R.userdebug.01.00.0040.X101

EVT2复测：过压保护:关机电压17V，恢复电压16.4V,标准16.5V

#11 Updated by SZ HW Test-曾小文 over 2 years ago

  • Tracker changed from Bug to 需求 Requirement
  • Status changed from 完成 Closed to 未着手 Not Started

#12 Updated by SZ HW Test-曾小文 over 2 years ago

  • Tracker changed from 需求 Requirement to Bug
  • Severity set to Critical
  • Reproducibility set to Every time
  • Test Type set to Release Test
  • Found Version set to 2022.10.24版本

#13 Updated by CDTS-TEST 周婷 over 2 years ago

  • Target version changed from VX1_MCE_FSE_V2.0_20220930 to VX1_MCE_FSE_V3.0_update_20221115

#14 Updated by CD BSP-陈杰 over 2 years ago

  • Assignee changed from CD BSP-陈杰 to SZ HW Test-曾小文
  • Target version changed from VX1_MCE_FSE_V3.0_update_20221115 to VX1_MCE_FSE_V2.0_20220930
  • Resolution set to FIXED
  • Found Version changed from 2022.10.24版本 to 版本使用20221102后的版本进行验证
  • Degrated set to No
  • Fixed Version set to 2022-11-02

目前代码已经入库，需要明天出版本后给到硬测进行测试。

#15 Updated by SZ HW Test-曾小文 over 2 years ago

  • Subject changed from 【Figure】【EVT】【EE】过压保护:关机电压17V，恢复电压16.4V,标准16.5V to 【Figure】【EVT2】【EE】过压保护:关机电压17V，恢复电压16.4V,标准16.5V
  • Assignee changed from SZ HW Test-曾小文 to CD BSP-陈杰

#16 Updated by CDTS-TEST 周婷 over 2 years ago

  • Status changed from 未着手 Not Started to 进行中 In Progress

#17 Updated by IOT-SP-TEST 刘颖 over 2 years ago

  • Due date changed from 2022-09-26 to 2022-11-03

#18 Updated by CD BSP-陈杰 over 2 years ago

问题已经解决，明天的版本进行测试

#19 Updated by CD BSP-陈杰 over 2 years ago

  • Assignee changed from CD BSP-陈杰 to 项目二组_SD3 曾小文
  • Found Version changed from 版本使用20221102后的版本进行验证 to 20221103日的DB版本

请使用今天我发给你的版本进行测试

#20 Updated by SZ HW Test-曾小文 over 2 years ago

  • Assignee changed from 项目二组_SD3 曾小文 to CD BSP-陈杰

#21 Updated by CD BSP-陈杰 over 2 years ago

  • Assignee changed from CD BSP-陈杰 to SZ HW Test-曾小文
  • Found Version changed from 20221103日的DB版本 to 20221108日的DB版本
  • Fixed Version changed from 2022-11-02 to 2022-11-08

可以使用今天的DB进行测试

#22 Updated by CD BSP-陈杰 over 2 years ago

更加实验室要求：
他的电压需要恢复至16V,测试过电压大于等于额17V；
所以进行了入夏设定：
高压：在16V-16.4V之间恢复都是正常，可通过，过压：在16.5V-17V保护为正常；
低压：在8.6V-9V之间恢复都是正常，可通过，过压：在8.5V-8V保护为正常.
麻烦进行测试一下

#23 Updated by SZ HW Test-曾小文 over 2 years ago

  • Tracker changed from Bug to 测试 Test-IT
  • Status changed from 进行中 In Progress to 完成 Closed

更新MCU后复测PASS

#24 Updated by SZ HW Test-曾小文 over 2 years ago

  • Tracker changed from 测试 Test-IT to Bug
  • Severity set to Critical
  • Reproducibility set to Every time
  • Test Type set to Release Test
  • Found Version set to 10.24版本

请把复测版本贴上，你们点击一下resolved，再点成verified，再指给我，要不然我关不掉

#25 Updated by CD FW-王伟 over 2 years ago

Gerrit Merge Information：
ID Project Branch Uploader
152609 Pre_figure/mcu Pre_figure_turbox-c2130c-la1.1-vendor-dev
BSP:MCU: MCU code buring up, storage, and feature integration
This commit protects the following functions:
1. Buring up of MCU code
2. Solve the power-on and power-on sequence bug
3. Increase the voltage protection function
4. MCU firmware upgrade function
TC-RID: 1201-0102701
TC-RID: 1201-0102703
TC-RID: 1201-0102704
IssueID: TS-R-BUG-111416
IssueID: TS-R-BUG-111734
IssueID: TS-R-BUG-111732
IssueID: TS-R-BUG-112002
IssueID: TS-R-DF-111421
IssueID: TS-R-DF-112099
IssueID: TS-R-DF-110660
IssueID: TS-R-DF-110663
IssueID: TS-R-DF-110664
Change-Id: Iacb3bbd40b9278405f21f5d34d741dfe08c3c4ff

#26 Updated by CD FW-王伟 over 2 years ago

Gerrit Merge Information：
ID Project Branch Uploader
152787 general/vendor/tc/mcu Pre_figure_turbox-c2130c-la1.1-vendor-dev
BSP: MCU: Add firmware for MCU programming and upgrade
The firmware version information is V0.0.1, which is the initial version. Implementation function:
1. Increase the power-on sequence
2. Increase the voltage protection function
3. Add version information
TC-RID: 1201-0102701
TC-RID: 1201-0102703
TC-RID: 1201-0102704
IssueID: TS-R-BUG-111416
IssueID: TS-R-BUG-111734
IssueID: TS-R-BUG-111732
IssueID: TS-R-BUG-112002
IssueID: TS-R-DF-111421
IssueID: TS-R-DF-112099
IssueID: TS-R-DF-110660
IssueID: TS-R-DF-110663
IssueID: TS-R-DF-110664
Change-Id: I047b1483f36d87a7a080b1470eb836cbc620a06e

#27 Updated by CD FW-王伟 over 2 years ago

Gerrit Merge Information：
ID Project Branch Uploader
154928 Pre_figure/mcu Pre_figure_turbox-c2130c-la1.1-vendor-dev
BSP:MCU: Functional integration version of the MCU
This version contains the following functions:
1.Improve the overvoltage protection function and increase the
over-voltage protection communication with the MMU;
2.Improve the function of power-on and power-up sequence, and
fix the problem that the boot screen is not displayed;
3.increase the can communication through, currently only open
the can's transceiver, there is no integration of other can's functions.
TC-RID: 1201-0102701
TC-RID: 1201-0102703
TC-RID: 1201-0102704
IssueID: TS-R-BUG-111416
IssueID: TS-R-BUG-111734
IssueID: TS-R-BUG-111732
IssueID: TS-R-BUG-112002
IssueID: TS-R-DF-111421
IssueID: TS-R-DF-112099
IssueID: TS-R-DF-110660
IssueID: TS-R-DF-110663
IssueID: TS-R-DF-110664
Change-Id: I0c7022c0c6e09e54f1b390deb1fb0df27ece4a38

#28 Updated by CD FW-王伟 over 2 years ago

Gerrit Merge Information：
ID Project Branch Uploader
159218 Pre_figure/mcu Pre_figure_turbox-c2130c-la1.1-vendor-dev
BSP:MCU: Modify the standard value of overvoltage and undervoltage
Since the hard test test found that the voltage value of overvoltage
and undervoltage is inaccurate, after measuring the accurate value with
a multimeter, the value set at the time of overvoltage and undervoltage
is reset according to the value of the multimeter.
Bin version: V0.0.2
TC-RID: 1201-0102704
IssueID: TS-R-BUG-111421
Change-Id: I3fd7ca9228e844cacd18f483458061fd19a0b354

#29 Updated by CD FW-王伟 over 2 years ago

Gerrit Merge Information：
ID Project Branch Uploader
159244 general/vendor/tc/mcu Pre_figure_turbox-c2130c-la1.1-vendor-dev
BSP:MCU: Modify the standard value of overvoltage and undervoltage
Since the hard test test found that the voltage value of overvoltage
and undervoltage is inaccurate, after measuring the accurate value with
a multimeter, the value set at the time of overvoltage and undervoltage
is reset according to the value of the multimeter.
Bin version: V0.0.2
TC-RID: 1201-0102704
IssueID: TS-R-BUG-111421
Change-Id: Ied8442b138f7781a70e4264bd1d7b2b6c1d55ef3

#30 Updated by CD FW-王伟 over 2 years ago

Gerrit Merge Information：
ID Project Branch Uploader
160640 Pre_figure/mcu Pre_figure_turbox-c2130c-la1.1-vendor-dev
BSP:MCU: Modify the overvoltage and undervoltage voltage values
Modify the overvoltage and undervoltage voltage values:
Overvoltage: more than 16.7V, recovery: less than 16.3V;
Undervoltage: below 8.4V, recovery: above 8.8V
Bin version: V0.0.4
TC-RID: 1201-0102704
IssueID: TS-R-BUG-111421
Change-Id: Ide842c61429108636a33de5a4d46f257b0ed9646

#31 Updated by CD FW-王伟 over 2 years ago

Gerrit Merge Information：
ID Project Branch Uploader
160831 general/vendor/tc/mcu Pre_figure_turbox-c2130c-la1.1-vendor-dev
BSP:MCU: Modify the overvoltage and undervoltage voltage values
Modify the overvoltage and undervoltage voltage values:
Overvoltage: more than 16.7V, recovery: less than 16.3V;
Undervoltage: below 8.4V, recovery: above 8.8V
Bin version: V0.0.4
TC-RID: 1201-0102704
IssueID: TS-R-BUG-111421
Change-Id: Ic16c7076031ed6fc17656bb222c094dd6c165036

Also available in: Atom PDF