Bug #113226
【Figure】【EVT2】【SI】A2B眼图需要软件设置成测试模式
| Status: | CLOSED | Start date: | 2022-10-28 | |
|---|---|---|---|---|
| Priority: | Urgent | Due date: | 2022-11-03 | |
| Assignee: | CD BSP-夏实 | % Done: | 0% | |
| Category: | 依赖软件规避的bug | |||
| Target version: | 依赖硬件的bugList | |||
| Need_Info: | Found Version: | 2022.10.24版本 | ||
| Resolution: | Degrated: | |||
| Severity: | Critical | Verified Version: | ||
| Reproducibility: | Every time | Fixed Version: | ||
| Test Type: | Release Test | Root cause: |
Description
A2B信号有2种电平，测试时无法叠加眼图，需要软件设置，区分出可以单独输出其中一种的波形
History
#1 Updated by CD BSP-唐金泽 over 2 years ago
- Assignee changed from CD BSP-唐金泽 to CD BSP-夏实
#2 Updated by CD BSP-夏实 over 2 years ago
已经将FSE板的TDM信号修改为Slave模式，等待王苗验证后将该方案展开。
#3 Updated by IOT-SP-TEST 刘颖 over 2 years ago
- Due date set to 2022-11-03
- Priority changed from Normal to Urgent
如需求有不清楚的，请及时提出来
#4 Updated by CD BSP-夏实 over 2 years ago
- Assignee changed from CD BSP-夏实 to IOT-SP-TEST 刘颖
目前已将修改FSE板的TDM信号为Slave模式的img文件给到王苗，等待王苗测试并反馈结果后调整
#5 Updated by IOT-SP-TEST 刘颖 over 2 years ago
- Assignee changed from IOT-SP-TEST 刘颖 to CD BSP-夏实
- Target version set to 依赖硬件的bugList
Hi 夏实，
请先自检修改；谢谢！
另外，请与硬件王苗和硬测曾小文，可以再沟通下需求，目前需要测试眼图需要的模式。
#6 Updated by CD BSP-唐金泽 over 2 years ago
- Tracker changed from 需求 Requirement to Bug
- Status changed from New to ASSIGNED
- Severity set to Critical
- Reproducibility set to Every time
- Test Type set to Release Test
- Found Version set to 2022.10.24版本
#7 Updated by CD BSP-夏实 over 2 years ago
已经提供更改slave模式的img文件，并且同小文，王苗确认了软件测的支撑方案，等待验证结果
#8 Updated by SZ HW Test-曾小文 over 2 years ago
- Status changed from ASSIGNED to RESOLVED
#9 Updated by SZ HW Test-曾小文 over 2 years ago
- Status changed from RESOLVED to VERIFIED
#10 Updated by SZ HW Test-曾小文 over 2 years ago
- Status changed from VERIFIED to CLOSED
A2B眼图很乱，请在Bug #111418中跟踪