Bug #115861
测试 Test-ST #114575: V5.0功能测试票
测试 Test-ST #114577: Launcher/SystemUI
【AF】【EVT】【桌面】刷机后或恢复出厂设置后底部导航尺寸不对，重启一次才能恢复正常
| Status: | CLOSED | Start date: | 2023-02-03 | |
|---|---|---|---|---|
| Priority: | High | Due date: | 2023-02-07 | |
| Assignee: | CD TEST-方永红 | % Done: | 100% | |
| Category: | CD-APP | |||
| Target version: | - | |||
| Need_Info: | -- | Found Version: | FlatBuild_HH_VX1_MCE_FSE.M.D.user.01.00.X101.202302030336 | |
| Resolution: | FIXED | Degrated: | -- | |
| Severity: | Normal | Verified Version: | FlatBuild_HH_VX1_MCE_FSE.M.R.user.01.00.0073.X101 | |
| Reproducibility: | Every time | Fixed Version: | 2023-02-09 | |
| Test Type: | ST | Root cause: | 问题原因：
overlay的值定义存在问题 问题修改： 调整overlay的值定义，确保加载正确的高度值 |
Description
【前提条件】
1、刷机后或恢复出厂设置后
【测试步骤】
1、打开一个应用
2、查看底部导航条尺寸
【预期结果】
1、导航条高度符合规定
【实际结果】
1、导航条高度明显小于规定高度
重启之后可恢复正常
History
#1 Updated by CD APP-王营 over 2 years ago
- Due date set to 2023-02-07
- Status changed from New to ASSIGNED
- Assignee changed from CD APP-王营 to CD FW王武军
#2 Updated by CD FW王武军 over 2 years ago
【】当前状态
确认问题现象，开始调查分析。
【】问题调查
刷机或者恢复出厂设置，获取的高度是24；
重启之后，或者的高度是72。从两者的差别来看，可能存在res资源加载的异常。
【】后续动作
沿着导航栏导读res资源包的方向进行调查
#3 Updated by IoT scm over 2 years ago
Gerrit Merge Information：
| ID | Project | Branch | Uploader |
| 179690 | general/platform/vendor/thundercomm/overlay | Pre_figure_turbox-c2130c-la1.1-qssi12-dev | wujun.wang@thundersoft.com |
| AF:NavigationBar: define navigationBar height Set the navigation mode is 2, so need define the fit value in the gesture overlay and frame overlay. TC-RID: 1201-0201904 IssueID: TS-R-BUG-115861 Change-Id: Icba670a9eae380eb81576d169acd66b1d56761cd |
|||
#4 Updated by IoT scm over 2 years ago
Gerrit Merge Information：
| ID | Project | Branch | Uploader |
| 179698 | general/platform/frameworks/base | Pre_figure_turbox-c2130c-la1.1-qssi12-dev | wujun.wang@thundersoft.com |
| AF:NavigationBar: define navigationBar height Set the navigation mode is 2, so need define the fit value in the gesture overlay and frame overlay. TC-RID: 1201-0201904 IssueID: TS-R-BUG-115861 Change-Id: I0024dafa57e372b1dad28bac548f68c806c03453 |
|||
#5 Updated by CD FW王武军 over 2 years ago
- Status changed from ASSIGNED to RESOLVED
- Assignee changed from CD FW王武军 to CD TEST-方永红
- Resolution changed from -- to FIXED
- Fixed Version set to 2023-02-09
- Root cause set to 问题原因： overlay的值定义存在问题 问题修改： 调整overlay的值定义，确保加载正确的高度值
#6 Updated by CD FW王武军 over 2 years ago
- % Done changed from 0 to 100
#7 Updated by CD TEST-方永红 over 2 years ago
- Status changed from RESOLVED to VERIFIED
- Verified Version set to FlatBuild_HH_VX1_MCE_FSE.M.R.user.01.00.0073.X101
2.9
刷机和恢复出厂设置后底部导航条尺寸正常，重启也不会发生变化
验证通过
#8 Updated by CD TEST-方永红 over 2 years ago
- Status changed from VERIFIED to CLOSED