Bug #117236
【BSP】【VC1】【Touch】TP更新固件后TP无响应
| Status: | CLOSED | Start date: | 2023-03-29 | ||
|---|---|---|---|---|---|
| Priority: | Normal | Due date: | |||
| Assignee: | 移动测试一组_CDTS 刘强 | % Done: | 70% | ||
| Category: | BSP | ||||
| Target version: | VC1_FSE_0090_20230411 | ||||
| Need_Info: | -- | Found Version: | FlatBuild_HH_MCE_FSE.M.R.user.01.00.0086.C102(X102) | ||
| Resolution: | -- | Degrated: | -- | ||
| Severity: | Normal | Verified Version: | |||
| Reproducibility: | Every time | Fixed Version: | |||
| Test Type: | ST | Root cause: | 升级完后，reset动作未生效 |
Description
TP更新不同固件后，出现TP无法使用
History
#1 Updated by CD BSP-杜磊 over 2 years ago
- Status changed from New to RESOLVED
- Assignee changed from CD BSP-杜磊 to 移动测试一组_CDTS 刘强
- % Done changed from 0 to 70
- Root cause set to 升级完后，reset动作未生效
Hi, 刘强，
验证方法：
刷之前老的版本，再刷VB版本，验证TP升级后是否能正常触摸。
Thanks.
#2 Updated by 移动测试一组_CDTS 刘强 over 2 years ago
vb版本验证通过
烧写12月工厂版本全擦
再烧写0086 user不全擦
开机后显示正常，TP可用
#3 Updated by IoT scm over 2 years ago
Gerrit Merge Information：
| ID | Project | Branch | Uploader |
| 190776 | general/kernel/msm-4.19 | Pre_figure_turbox-c2130c-la1.1-vendor-dev | dulei0503@thundersoft.com |
| BSP:TP: Fix VC1 tp can't work after upgrade FW Touch's interrupt must be enabled after updating FW TC-RID: 1201-0100401 IssueID: TS-R-DF-117236 Change-Id: I779ed15a7952940edede52728883b0ab95086184 |
|||
#4 Updated by 移动测试一组_CDTS 刘强 over 2 years ago
- Status changed from RESOLVED to VERIFIED
验证版本：FlatBuild_HH_MCE_FSE.M.D.userdebug.01.00.C102.202304020018
验证结果：验证通过
烧写12月工厂版本全擦
再烧写FlatBuild_HH_MCE_FSE.M.D.userdebug.01.00.C102.202304020018不全擦
开机后显示正常，TP可用
#5 Updated by 移动测试一组_CDTS 刘强 over 2 years ago
- Status changed from VERIFIED to CLOSED