Bug #111536

测试 Test-IT #110867: V1.0测试功能汇总

测试 Test-IT #110877: BSP-BVT测试-MCU

【BSP】【EVT】【MCU】【必现】MCU升级完成后自动重启，屏幕背光亮或者不亮，无画面显示，板子状态正常，adb可用，投屏工具正常使用

Added by SZTS_TEST 邹涛 almost 3 years ago. Updated over 2 years ago.

Status:CLOSEDStart date:2022-08-30
Priority:HighDue date:
Assignee:CD SYSTEM-赵正军% Done:

0%

Category:BSP
Target version:VX1_MCE_FSE_V2.0_20220930
Need_Info:-- Found Version:0.0.0.20220830_alpha_private_userdebug
Resolution:-- Degrated:--
Severity:Critical Verified Version:
Reproducibility:Rarely Fixed Version:
Test Type:Bring Up Test Root cause:

Description

前置条件：
1、DUT各模块功能正常且处于开机状态

操作步骤：
1、打开MCUupgrade app，进行mcu升级
2、mcu升级完成后自动重启，查看屏幕画面显示

实际结果：
1、屏幕背光亮无画面显示，板子状态正常，adb可用，投屏工具正常使用

预期结果：
1、屏幕正常显示画面

logcat.txt Magnifier (2.88 MB) SZTS_TEST 邹涛, 2022-08-30 16:26

dmesg.txt Magnifier (5.53 KB) SZTS_TEST 邹涛, 2022-08-30 16:59

Serial-COM119_20220924195645.rar (4.86 MB) SZTS_TEST 邹涛, 2022-09-26 11:18

History

#1 Updated by SZTS_TEST 邹涛 almost 3 years ago

  • Subject changed from 【BSP】【EVT】【MCU】【偶现两次】MCU升级完成后自动重启，屏幕背光亮无画面显示，板子状态正常，adb可用，投屏工具正常使用 to 【BSP】【EVT】【MCU】【必现】MCU升级完成后自动重启，屏幕背光亮无画面显示，板子状态正常，adb可用，投屏工具正常使用

#2 Updated by SZTS_TEST 邹涛 almost 3 years ago

  • Subject changed from 【BSP】【EVT】【MCU】【必现】MCU升级完成后自动重启，屏幕背光亮无画面显示，板子状态正常，adb可用，投屏工具正常使用 to 【BSP】【EVT】【MCU】【必现】MCU升级完成后自动重启，屏幕背光亮或者不亮，无画面显示，板子状态正常，adb可用，投屏工具正常使用

#3 Updated by SZTS_TEST 邹涛 almost 3 years ago

#4 Updated by SZ BSP-徐季源 almost 3 years ago

  • Assignee changed from SZ BSP-徐季源 to 软件二组_SD3 朱彦斌

彦斌，先帮忙分析一下屏I2C不通的原因是什么，看看是不是什么电上的不对，有需要可以去邹涛那边看看现场

#5 Updated by SZ TPM-罗云进 almost 3 years ago

  • Assignee changed from 软件二组_SD3 朱彦斌 to SZTS_TEST 邹涛

#6 Updated by CD TPM-申艳艳 almost 3 years ago

  • Category set to BSP

#7 Updated by CDTS-TEST 周婷 almost 3 years ago

  • Target version set to VX1_MCE_FSE_V1.0_update_20220925

#8 Updated by SZTS_TEST 邹涛 almost 3 years ago

使用0916号DB版本验证（01.00.X101_20220916_private_userdebug），手动反复进行mcu升级低概率出现mcu升级完成后重启，板子进入fastboot模式，屏幕黑屏情况；
该bug未彻底解决，待https://share.thundersoft.com/redmine/issues/111881 问题解决后一并验证

#9 Updated by SZTS_TEST 邹涛 almost 3 years ago

  • Assignee changed from SZTS_TEST 邹涛 to CD SYSTEM-赵正军

请研发将设备进fastboot模式的修改提交合入DB后，在此验证

#10 Updated by SZTS_TEST 邹涛 almost 3 years ago

ftp://dvbuild:thundercomm@10.0.76.28/home/scm/VerifyBuild/Pre_figure_turbox-c2130c-la1.1-qssi12-dev/20220915/202209151427-1291
烧录上面VB版本，验证mcu升级118次未复现；等研发提交代码入库后，在DB版本上再次验证

#11 Updated by CD TPM-申艳艳 almost 3 years ago

  • Category changed from BSP to SYSTEM

#12 Updated by CD SYSTEM-赵正军 almost 3 years ago

  • Category changed from SYSTEM to BSP
  • Assignee changed from CD SYSTEM-赵正军 to SZTS_TEST 邹涛

bug#111881对应提交已入库，还请用DB测试

#13 Updated by SZTS_TEST 邹涛 almost 3 years ago

使用946版本验证mcu升级429次，板子均能正常启动，屏幕正常点亮

#14 Updated by SZTS_TEST 邹涛 almost 3 years ago

01.00.0019.X101 版本验证82次未复现，该bug关闭

#15 Updated by SZTS_TEST 邹涛 almost 3 years ago

  • Status changed from New to RESOLVED

#16 Updated by SZTS_TEST 邹涛 almost 3 years ago

  • Status changed from RESOLVED to VERIFIED

#17 Updated by SZTS_TEST 邹涛 almost 3 years ago

  • Status changed from VERIFIED to CLOSED

#18 Updated by SZTS_TEST 邹涛 almost 3 years ago

  • Status changed from CLOSED to New
  • Target version changed from VX1_MCE_FSE_V1.0_update_20220925 to VX1_MCE_FSE_V2.0_20220930

#19 Updated by SZTS_TEST 邹涛 almost 3 years ago

0924号release版本的userdebug版本，mcu循环升级228次后，板子未正常启动，端口显示90E5，电流大小为348ma，adb不可用

#21 Updated by SZTS_TEST 邹涛 almost 3 years ago

0924号userdrbug版本验证问题未修复，mcu循环升级228次后，板子未正常启动
dump文件下载地址：https://thundersoft.feishu.cn/file/boxcnzBe4nDo4ActB5SpeXnlgMg

#22 Updated by SZTS_TEST 邹涛 almost 3 years ago

  • Assignee changed from SZTS_TEST 邹涛 to CD SYSTEM-赵正军

#23 Updated by SZTS_TEST 邹涛 almost 3 years ago

  • Status changed from New to RESOLVED

#24 Updated by SZTS_TEST 邹涛 almost 3 years ago

  • Status changed from RESOLVED to VERIFIED

#25 Updated by SZTS_TEST 邹涛 almost 3 years ago

  • Status changed from VERIFIED to CLOSED

#26 Updated by CD SYSTEM-赵正军 almost 3 years ago

如果0924版本没有出现此bug描述的问题，要么继续压测，要么关闭。

如果测试过程中有出现不一样现象的其他问题，还请另起bug

#27 Updated by CD FW-王伟 over 2 years ago

Gerrit Merge Information：
ID Project Branch Uploader
146502 general/LINUX/android/vendor/qcom/proprietary Pre_figure_turbox-c2130c-la1.1-vendor-dev
BSP:LCD: Use SOC GPIO to wakeup Panel(2/2)
Add GPIO22 to wakeup Panel to avoid Panel's Reset by MCU
TC-RID: 1201-0100501
IssueID: TS-R-DF-111536
Change-Id: I40876772de67db11c174dde9942f2a3bf5f187c8

#28 Updated by CD FW-王伟 over 2 years ago

Gerrit Merge Information：
ID Project Branch Uploader
146503 general/kernel/msm-4.19 Pre_figure_turbox-c2130c-la1.1-vendor-dev
BSP:LCD: Use SOC GPIO to wakeup Panel(1/2)
Add GPIO22 to wakeup Panel to avoid Panel's Reset by MCU
TC-RID: 1201-0100501
IssueID: TS-R-DF-111536
Change-Id: I710578af60e554a7a26589436e2a354762327365

#29 Updated by CD FW-王伟 over 2 years ago

Gerrit Merge Information：
ID Project Branch Uploader
147998 general/LINUX/android/vendor/qcom/proprietary Pre_figure_turbox-c2130c-la1.1-vendor-release_evt1
BSP:LCD: Use SOC GPIO to wakeup Panel(2/2)
Add GPIO22 to wakeup Panel to avoid Panel's Reset by MCU
TC-RID: 1201-0100501
IssueID: TS-R-DF-111536
Change-Id: I40876772de67db11c174dde9942f2a3bf5f187c8
(cherry picked from commit 3076229685491efda99e1a2f51a70d4d6d176bb1)

Also available in: Atom PDF