Bug #112763
【BSP】【EVT2】【3/20】【User】高概率进入不9008
| Status: | CLOSED | Start date: | 2022-10-21 | ||
|---|---|---|---|---|---|
| Priority: | Normal | Due date: | |||
| Assignee: | CDTS_TEST 刘勇 | % Done: | 40% | ||
| Category: | BSP | ||||
| Target version: | VX1_MCE_FSE_V3.0_update_20221130 | ||||
| Need_Info: | -- | Found Version: | FlatBuild_HH_VX1_MCE_FSE.M.D.user.01.00.X101.202210290232 | ||
| Resolution: | -- | Degrated: | -- | ||
| Severity: | Major | Verified Version: | |||
| Reproducibility: | Frequently | Fixed Version: | |||
| Test Type: | IT | Root cause: |
Description
【前提条件】
1.DUT烧录10月20的Userdebug版本
【操作步骤】
1.给板子下上电
2.打开usb调试，输入adb reboot edl
【实际结果】
2.设备重启，不能进入9008
【预期结果】
2.设备进入9008
【概率】
3/20
COM22USBSerialPortCOM22_20221021_101631.txt 
- 串口LOG
(208 KB)
tlog.zip (10.5 MB)
History
#1 Updated by CDTS_TEST 刘勇 over 2 years ago
EVT2设备出现过不能进入9008，该设备就会必现。
#2 Updated by CD BSP-唐金泽 over 2 years ago
- Status changed from New to ASSIGNED
- Assignee changed from CD BSP-杜磊 to CD BSP-余霄
#3 Updated by CDTS_TEST 刘勇 over 2 years ago
- Subject changed from 【BSP】【EVT2】【高概率】【User】高概率进入不9008 to 【BSP】【EVT2】【3/20】【User】高概率进入不9008
#4 Updated by CD BSP-余霄 over 2 years ago
已提高通CASE，正在与高通确认
case号:
06299882
#5 Updated by CD BSP-余霄 over 2 years ago
- Status changed from ASSIGNED to NEED_INFO
- Assignee changed from CD BSP-余霄 to CDTS_TEST 王成
目前USB端口默认配置有问题
请帮忙测试是否是由该问题引起的。
修复代码：
https://dev.thundercomm.com/gerrit/c/general/platform/vendor/qcom-opensource/usb/+/157848
代码10.26已合入，请用10.27DB版本进行测试验证。
#6 Updated by CDTS_TEST 王成 over 2 years ago
- Assignee changed from CDTS_TEST 王成 to CD Test赵飞
#7 Updated by CD Test赵飞 over 2 years ago
- Status changed from NEED_INFO to RESOLVED
- % Done changed from 0 to 70
验证版本：FlatBuild_HH_VX1_MCE_FSE.M.D.user.01.00.X101.202210280435
验证结果：PASS
执行adb reboot edl命令10次，DUT均可以正常进入9008模式
概率问题，继续跟踪2个版本
#8 Updated by CD Test赵飞 over 2 years ago
- Target version changed from VX1_MCE_FSE_V3.0_20221030 to VX1_MCE_FSE_V3.0_update_20221115
- % Done changed from 70 to 80
验证版本：FlatBuild_HH_VX1_MCE_FSE.M.R.userdebug.01.00.0041.X101
验证结果：PASS
执行adb reboot edl命令10次，DUT均可以正常进入9008模式
概率问题，继续跟踪1个版本
#9 Updated by CDTS_TEST 刘勇 over 2 years ago
- Found Version changed from FlatBuild_VX1_MCE_xx.xx_FSE.R.userdebug.0.0.0.20221020.alpha_0038 to FlatBuild_HH_VX1_MCE_FSE.M.D.user.01.00.X101.202210290232
【HW】EVT2-VX1
【SW】FlatBuild_HH_VX1_MCE_FSE.M.D.user.01.00.X101.202210290232
【前提条件】
1.DUT烧录10月29的Userdebug版本
【操作步骤】
1.给板子下上电
2.打开usb调试，输入adb reboot edl
【实际结果】
2.设备进入9008
【复测次数】10次
【复测结果】未复现，已跟踪3个版本，后续发现再提交BUG，现关闭次BUG
#10 Updated by CDTS_TEST 刘勇 over 2 years ago
- Status changed from RESOLVED to VERIFIED
- Assignee changed from CD Test赵飞 to CDTS_TEST 刘勇
#11 Updated by CDTS_TEST 刘勇 over 2 years ago
- Status changed from VERIFIED to CLOSED
#12 Updated by CDTS_TEST 王成 over 2 years ago
- Status changed from CLOSED to New
- Target version changed from VX1_MCE_FSE_V3.0_update_20221115 to VX1_MCE_FSE_V3.0_update_20221130
在11.2号的版本上复现了，user版本跑一晚上monkey待机一晚后、用reboo edl命令、直接重启未进入9008模式
#13 Updated by CD Test赵飞 over 2 years ago
- File COM22USBSerialPortCOM22_20221103_134040.txt added
- Assignee changed from CDTS_TEST 刘勇 to CD BSP-余霄
- % Done changed from 80 to 40
串口日志见附件
#14 Updated by CD BSP-余霄 over 2 years ago
- Status changed from New to ASSIGNED
- Assignee changed from CD BSP-余霄 to CD SYSTEM-胡兵
HI 胡兵
关键日志如下，请帮忙确认一下原因
[79535.806005] init: Received sys.powerctl='reboot,edl' from pid: 26281 (/system/bin/reboot)
[79535.808421] mv2112_read_status
[79535.814757] init: sys.powerctl: do_shutdown: 0 IsShuttingDown: 0
[79535.818461] mv2112_update_link: 3.0x901(1G): 0x80
[79535.824554] init: Got shutdown_command 'reboot,edl' Calling HandlePowerctlMessage()
[79535.829409] mv2112_update_link: 3.0x8109(100M): 0x8
[79535.841900] mv2112_update_link: link 0x0
[79535.842668] [MAX975X:mcu_keep_wakeup_work_func] ERROR ERR gpio detected
[79535.844040] init: Clear action queue and start shutdown trigger
[79535.844181] init: Entering shutdown mode
[79535.846261] mv2112_read_status: autoneg is disabled
[79535.847081] init: processing action (shutdown_done) from (<Builtin Action>:0)
[79535.847135] init: Reboot start, reason: reboot,edl, reboot_target: edl
[79535.847172] init: Shutdown timeout: 6000 ms
[79535.847198] init: Create reboot monitor thread.
[79535.847630] init: shutdown_timeout_timespec.tv_sec: 79841
#15 Updated by CD SYSTEM-胡兵 over 2 years ago
Hi ALL
针对此问题，高通软件(PMIC)看出来是PM8150发生UVLO，需要硬件抓取异常时VBUS_IN, VBAT, VPH, FAULT_N, PS_HOLD, PON_RESET_N信号进行分析，内部拉通信息后，似乎有同样的问题发生在8250平台，请测试同学先使用此版本进行复测验证，如果还有问题则需要拉硬件介入共同分析。
ftp: 10.0.76.28/home/scm/VerifyBuild/Pre_figure_turbox-c2130c-la1.1-qssi12-dev/20221109/202211092207-2251Thanks.
#16 Updated by CD SYSTEM-胡兵 over 2 years ago
- Assignee changed from CD SYSTEM-胡兵 to CDTS_TEST 刘勇
#17 Updated by CDTS_TEST 王成 over 2 years ago
- Status changed from ASSIGNED to NEED_INFO
继续复测跟踪，复现之后将BUG指派到硬件一起验证
#18 Updated by CDTS_TEST 王成 over 2 years ago
- Severity changed from Normal to Major
#19 Updated by CDTS_TEST 刘勇 over 2 years ago
【HW】EVT2-VC1及屏幕
【SW】ftp: 10.0.76.28/home/scm/VerifyBuild/Pre_figure_turbox-c2130c-la1.1-qssi12-dev/20221109/202211092207-2251
【前提条件】
1.DUT烧录VB版本
【操作步骤】
1.给板子下上电
2.打开usb调试，输入adb reboot edl
【实际结果】
2.设备能进入9008
【跟踪复现次数】10 次
【复现结果】未复现
#20 Updated by CDTS_TEST 刘勇 over 2 years ago
【HW】EVT2-VC1及屏幕
【SW】FlatBuild_HH_VX1_MCE_FSE.M.D.user.01.00.X101.202211190335
【前提条件】
1.DUT烧录VB版本
【操作步骤】
1.给板子下上电
2.打开usb调试，输入adb reboot edl
【实际结果】
2.设备能进入9008
【跟踪复现次数】3 次
【复现结果】未复现
#21 Updated by CDTS_TEST 刘勇 over 2 years ago
【HW】EVT2-VX1及屏幕、EVT1-VC1及屏
【SW】FlatBuild_HH_VX1_MCE_FSE.M.D.user.01.00.X101.202211190335
【前提条件】
1.DUT烧录VB版本
【操作步骤】
1.给板子下上电
2.打开usb调试，输入adb reboot edl
【实际结果】
2.设备能进入9008
【跟踪复现次数】3 次
【复现结果】未复现（跑monkey和高温测试都未复现）
#22 Updated by CDTS_TEST 刘勇 over 2 years ago
- Status changed from NEED_INFO to RESOLVED
#23 Updated by CDTS_TEST 刘勇 over 2 years ago
- Status changed from RESOLVED to VERIFIED
#24 Updated by CDTS_TEST 刘勇 over 2 years ago
- Status changed from VERIFIED to CLOSED
#25 Updated by CD FW-王伟 over 2 years ago
| ID | Project | Branch | Uploader |
| 164192 | general/boot_images | Pre_figure_turbox-c2130c-la1.1-vendor-dev | hubing0803@thundersoft.com |
| System:Stability:The device cannot enter 9008 by command with low probability The device cannot enter 9008 through "adb reboot edl" with low probaility. Investigation found that it is related to WLED, so the related functions are banned TC-RID: 0300-0800302 IssueID: TS-R-BUG-112763 Change-Id: Idb73f204ef07f590584e54fed647975b259fabce |
|||